From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from beavis.ybsoft.com (lametoby.ybsoft.com [63.224.241.66]) by dsl2.external.hp.com (Postfix) with ESMTP id 88057482B for ; Sun, 13 May 2001 14:14:05 -0600 (MDT) Date: Sun, 13 May 2001 14:14:05 -0600 To: "Douglas T. Crosher" Cc: parisc-linux@lists.parisc-linux.org Subject: Re: [parisc-linux] J2240? Message-ID: <20010513141405.A25241@beavis.ybsoft.com> Reply-To: rbradetich@uswest.net References: <3AFE1F8B.725C1B8B@scieneer.com> <20010513122336.A25045@beavis.ybsoft.com> <3AFEE176.28EBFC7A@scieneer.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii In-Reply-To: <3AFEE176.28EBFC7A@scieneer.com>; from dtc@scieneer.com on Mon, May 14, 2001 at 05:33:10AM +1000 From: rbrad@beavis.ybsoft.com (Ryan Bradetich) List-ID: Douglas, I glanced through the dino.c code and found the following comment: /* ** If hversion is what is read from Dino, we should be OK. ** If it's what PDC told us, J2240 PDC reports the hv_model wrong ** for the first Dino. I think it reports 0x05d. ... ** This comment appears to apply to the bug you are seening since this device shows up in your inventory. > 13. Unknown device (13) at 0xfc000000, versions 0x5d, 0x3, 0xa, 0x0, 0x0 > Dino version J2240 (bridge mode) found at 0xfc000000 I will take a look at it some more later today to see if I can figure it out, but Grant Grundler probably already knows how to fix the problem :) Thanks, - Ryan On Mon, May 14, 2001 at 05:33:10AM +1000, Douglas T. Crosher wrote: > Ryan Bradetich wrote: > ... > > I have to fess up on this one, since this machine uses both the > > ccio-dma driver and the 32-bit pdc translator :) I hve been testing > > on a C200 that uses the ccio-dma driver and the 32-bit translator > > also ... but I have not been able to boot the machine with a 64-bit > > kernel yet. I think it is a problem with the ccio-dma driver, but > > I have been unable to find the error yet. > > > > Booting the machine with a 32-bit kernel should work fine ... if it > > does not, post the output to the list again we can try to help debug > > Below is the output for the 32 bit kernel which proceeds in > a similar manner to the 64 bit kernel and has the same problems. > > Regards > Douglas Crosher > > -=-=- > > HARD Booted. > palo ipl <> Sun May 13 11:53:13 EST 2001 > 0/vmlinux 2614364 bytes @ 0x6800 > 0/palo-cmdline '0/vmlinux HOME=/ TERM=linux root=/dev/nfs nfsroot=10.0.0.100 > console=ttyS0' > Kernel: partition 0 file /vmlinux > ELF32 executable > Entry 00100000 first 00100000 n 5 > Segment 0 load 00100000 size 1516512 mediaptr 0x1000 > Segment 1 load 00274000 size 181808 mediaptr 0x174000 > Segment 2 load 002a4000 size 219576 mediaptr 0x1a1000 > Segment 3 load 002dc000 size 8192 mediaptr 0x1d7000 > Segment 4 load 0030a068 size 75520 mediaptr 0x1d9068 > branching to kernel entry point 0x00100000 > Set default PSW W bit to 0 > PDC Console Initialized > Linux version 2.4.0 () (gcc version 3.0 20010427 (prerelease)) #8 Mon May 14 > 05:02:36 EST 2001 > FP[0] enabled: Rev 0 Model 14 > The 32-bit Kernel has started... > Determining PDC firmware type: Newer Box > setup_cmdline(0x64cc4,0x64cc4,0x0,0x0) > PALO command line: 'HOME=/ TERM=linux root=/dev/nfs nfsroot=10.0.0.100 > console=ttyS0' > PALO initrd 0-0 > model 00005b50 00000491 00000000 00000002 77c5684a 100000f0 00000008 000000b2 > 000000b2 > vers 00000501 > cpuid 000001d7 > CPUID vers 14 rev 23 > model 9000/782/J2240 > Total Memory: 96 Mb > initrd: 00000000-00000000 > pagetable_init > On node 0 totalpages: 24576 > zone(0): 24576 pages. > zone(1): 0 pages. > zone(2): 0 pages. > led_init: chassis info: model=0 (LCD), lcd_width=16, cmd_delay=40, actcnt=32, > maxcnt=32 > led_init: min_cmd_delay = 40 uS > LCD display at f0190000,f0190001 registered > Searching for devices... > Found devices: > 1. SummitHawk Dino RS-232 (10) at 0xfc003000, versions 0x5d, 0x0, 0x8c, 0x0, 0x0 > 2. SummitHawk Dino RS-232 (10) at 0xf1607000, versions 0x5d, 0x0, 0x8c, 0x0, 0x0 > 3. SummitHawk 230 Core BA (11) at 0xffd00000, versions 0x5c, 0x0, 0x81, 0x0, > 0x0, additional addresses: 0xffd0c000 0xffc00000 > 4. SummitHawk 230 Core SCSI (10) at 0xffd06000, versions 0x5c, 0x0, 0x82, 0x0, > 0x0 > 5. SummitHawk 230 Core Centronics (10) at 0xffd02000, versions 0x5c, 0x0, 0x74, > 0x0, 0x0, additional addresses: 0xffd01000 0xffd03000 > 6. SummitHawk 230 Core Audio (10) at 0xffd04000, versions 0x5c, 0x4, 0x7b, 0x0, > 0x0 > 7. SummitHawk 230 Core PC Keyboard (10) at 0xffd08000, versions 0x5c, 0x0, 0x84, > 0x0, 0x0 > 8. SummitHawk 230 Core PC Keyboard (10) at 0xffd08100, versions 0x5c, 0x0, 0x84, > 0x0, 0x0 > 9. U2-IOA BC GSC+ Port (7) at 0xfc03f000, versions 0x501, 0x1, 0xc, 0x3, 0x0 > 10. U2-IOA BC GSC+ Port (7) at 0xf163f000, versions 0x501, 0x1, 0xc, 0x3, 0x0 > 11. Cujo PCI Bridge (13) at 0xf1604000, versions 0x682, 0x1, 0xa, 0x1, 0x0 > 12. Dino PCI Bridge (13) at 0xfc004000, versions 0x680, 0x3, 0xa, 0x0, 0x0, > additional addresses: 0xfc800000 > 13. Unknown device (13) at 0xfc000000, versions 0x5d, 0x3, 0xa, 0x0, 0x0 > 14. U2-IOA BC Runway Port (12) at 0xfff88000, versions 0x580, 0xf, 0xb, 0x1, > 0x50 > 15. U2-IOA BC Runway Port (12) at 0xfff8a000, versions 0x580, 0xf, 0xb, 0x1, > 0x50 > 16. SummitHawk U+ (0) at 0xfffa0000, versions 0x5b5, 0x0, 0x4, 0x0, 0x91 > 17. SummitHawk U+ (0) at 0xfffa2000, versions 0x5b5, 0x0, 0x4, 0x0, 0x91 > 18. SummitHawk Memory (1) at 0xfffb1000, versions 0x83, 0x0, 0x9, 0x0, 0x0 > That's a total of 18 devices. > CONFIG_SMP=n ignoring additional CPUs > Warning : device (0, 0x5b5, 0x0, 0x4, 0x0) NOT claimed by CPU PARISC > CPU(s): 1 x PA8200 (PCX-U+) at 236.000000 MHz > Kernel command line: HOME=/ TERM=linux root=/dev/nfs nfsroot=10.0.0.100 > console=ttyS0 > Calibrating delay loop... 470.22 BogoMIPS > Memory: 94416k available > Dentry-cache hash table entries: 16384 (order: 5, 131072 bytes) > Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes) > Page-cache hash table entries: 32768 (order: 5, 131072 bytes) > Inode-cache hash table entries: 8192 (order: 4, 65536 bytes) > POSIX conformance testing by UNIFIX > Lasi version 0 at 0xffd00000 found. > Initializing Lasi PS/2-keyboard port at 0xffd08000... > Support for Lasi PS/2-psaux not yet available ! > Dino version 3.1 (bridge mode) found at 0xfc004000 > Dino version J2240 (bridge mode) found at 0xfc000000 > dino_bridge_init: IO_ADDR_EN hasn't been configured. > kernel BUG at dino.c:795! > ccio found U2 I/O MMU at 0xfff88000 > io_io_high: 0xfff80000 io_io_low: 0xf4000000 > ccio found U2 I/O MMU at 0xfff8a000 > io_io_high: 0xf4000000 io_io_low: 0xf1600000 > Linux NET4.0 for Linux 2.4 > Based upon Swansea University Computer Society NET3.039 > Starting kswapd v1.8 > pty: 256 Unix98 ptys configured > lp: driver loaded but no devices found > RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize > Serial driver version 5.02 (2000-08-09) with MANY_PORTS SHARE_IRQ SERIAL_PCI > enabled > busdevice_alloc_irq(0x102e0244): No known LASI/ASP/WAX owns device at 0xfc003000 > ! > IRQ not found for serial device at 0xfc003000 > Warning : device (10, 0x5d, 0x0, 0x8c, 0x0) NOT claimed by serial device 715/new > or similiar > busdevice_alloc_irq(0x102e027c): No known LASI/ASP/WAX owns device at 0xf1607000 > ! > IRQ not found for serial device at 0xf1607000 > Warning : device (10, 0x5d, 0x0, 0x8c, 0x0) NOT claimed by serial device 715/new > or similiar > > Dumping Stack from 10034000 to 10034a80: > 4000 00000000 00000040 00000000 00000000 10289440 00000001 00000000 ffffffff > ... > 4a60 00000000 00000000 10108c2c 10106744 11111111 00000000 3e743615 25db7828 > > Kernel Fault: Code=26 regs=10034840 (Addr=00000004) > > YZrvWESTHLNXBCVMcbcbcbcbOGFRQPDI > PSW: 00000000000001100000000000001110 > r0-3 00000000 102e30c0 1010cd98 10297194 > r4-7 0000ffff 0000002f 00000000 0000000f > r8-11 00002000 102f8d64 0004000e 102a4674 > r12-15 000000f2 000000fa f0140000 00000007 > r16-19 f000173c f0000218 f0000210 ffffffff > r20-23 1029c11c 102f59e8 101f1750 ffffffff > r24-27 0000002f 0000ffff 00000000 10274010 > r28-31 00000000 0000002f 10034a80 1010cd98 > sr0-3 00000000 00000000 00000000 00000000 > sr4-7 00000000 00000000 00000000 00000000 > > IASQ: 00000000 00000000 IAOQ: 101f177c 101f1780 > IIR: 0cc81099 ISR: 00000000 IOR: 00000004 > ORIG_R28: 55555555 > > > _______________________________________________ > parisc-linux mailing list > parisc-linux@lists.parisc-linux.org > http://lists.parisc-linux.org/cgi-bin/mailman/listinfo/parisc-linux > --