From: Richard Hirst <rhirst@linuxcare.com>
To: Tom Hansen <tomh@execpc.com>
Cc: parisc-linux@lists.parisc-linux.org
Subject: Re: [parisc-linux] Problems booting .61 ISO on 715/75
Date: Wed, 23 May 2001 08:58:33 +0100 [thread overview]
Message-ID: <20010523085833.O8736@linuxcare.com> (raw)
In-Reply-To: <5.1.0.14.0.20010520213045.029610c0@mail.execpc.com>; from tomh@execpc.com on Sun, May 20, 2001 at 09:35:01PM -0500
Hi,
I don't think 715/old (which includes 715/75) have STI graphics,
so I wouldn't expect that to work. In any case, my 715/75 hangs
later during install (serial console). I think that is due to problems
with glibc (misaligned locks), which should be fixed in glibc 2.2.3
some time soon.
Richard
On Sun, May 20, 2001 at 09:35:01PM -0500, Tom Hansen wrote:
>
> I have just downloaded the 0.61 ISO:
>
> palinux-0.6-32STI.iso.gz
>
> from the HP site, burned a CD, and booted from the CD on my 715/75 Apollo,
> 160MB, Toshiba 5701 CD-ROM. I'm using the built-in console, I don't have a
> serial console.
>
> After what appears to be a successful start to the boot sequence (it
> identifies devices OK, etc.) it gets as far as the line:
>
> Console: colour dummy device 80x25
>
> After this line is displayed, the CD is accessed for about 2 or 3 more
> seconds, after which everything stops.
>
> Any ideas?
>
>
> --
> Tom Hansen
> tomh@execpc.com
>
>
>
> _______________________________________________
> parisc-linux mailing list
> parisc-linux@lists.parisc-linux.org
> http://lists.parisc-linux.org/cgi-bin/mailman/listinfo/parisc-linux
>
prev parent reply other threads:[~2001-05-23 8:00 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2001-05-21 2:35 [parisc-linux] Problems booting .61 ISO on 715/75 Tom Hansen
2001-05-23 7:58 ` Richard Hirst [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20010523085833.O8736@linuxcare.com \
--to=rhirst@linuxcare.com \
--cc=parisc-linux@lists.parisc-linux.org \
--cc=tomh@execpc.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox