From mboxrd@z Thu Jan  1 00:00:00 1970
Return-Path: <owner-parisc-linux@dsl2.external.hp.com>
Received: from rhirst.linuxcare.com (pc1-hems4-0-cust107.bre.cable.ntl.com [213.105.88.107])
	by dsl2.external.hp.com (Postfix) with ESMTP id 4BE85489D
	for <parisc-linux@lists.parisc-linux.org>; Mon, 10 Sep 2001 06:41:24 -0600 (MDT)
Received: by rhirst.linuxcare.com (Postfix, from userid 501)
	id B4A95B00C; Mon, 10 Sep 2001 13:41:34 +0100 (BST)
Date: Mon, 10 Sep 2001 13:41:34 +0100
From: Richard Hirst <rhirst@linuxcare.com>
To: Boyan Lazarov <bsl@mek.dtu.dk>
Cc: parisc-linux <parisc-linux@lists.parisc-linux.org>
Subject: Re: [parisc-linux] Installing on Apollo 735
Message-ID: <20010910134134.V19441@linuxcare.com>
References: <3B9BA35D.9A02DD98@mek.dtu.dk> <20010910083204.P19441@linuxcare.com> <3B9C73CF.412C929@mek.dtu.dk> <20010910103658.T19441@linuxcare.com> <3B9CAC65.E1096C44@mek.dtu.dk>
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
In-Reply-To: <3B9CAC65.E1096C44@mek.dtu.dk>; from bsl@mek.dtu.dk on Mon, Sep 10, 2001 at 02:04:53PM +0200
List-ID: <linux-parisc.vger.kernel.org>

On Mon, Sep 10, 2001 at 02:04:53PM +0200, Boyan Lazarov wrote:
> The system just stop 
> The boot parameters are :
> 0: 0/vmlinux
>  1: root=/dev/ram
>  2: initrd=0/ramdisk
>  3: console=ttyS0
>  4: TERM=vt102
>  5: sim700=noneg:0xff,nodisc:0xff
>  6: isl
> 
> And the output is:
> SCSI subsystem driver Revision: 1.00 
> sim700: Configuring 53c700 (SCSI-ID 7) at f0825100, IRQ 86, options 1
> scsi0: Revision 0x0
> scsi0: test 1 completed ok.
> scsi0 : LASI/Simple 53c7xx
>   Vendor: PLEXTOR   Model: CD-ROM PX-32TS    Rev: 1.02
>   Type:   CD-ROM                             ANSI SCSI revision: 02
> scsi0: Unable to abort command for target 5
> scsi0: Unable to send Bus Device Reset for target 5
> scsi0: Unable to do SCSI bus reset
> scsi0: >>>>>>>>>>>> Host reset <<<<<<<<<<<<
> scsi0: istat = 0c, sstat0 = 00, sstat1 = 00, dstat = 00
> scsi0: dsp = 07875060 (script[0x1418]), dsps = 078751f0, target = 0
> scsi0: Failing command for ID5
>   Vendor: SEAGATE   Model: ST31200N          Rev: 8714
>   Type:   Direct-Access                      ANSI SCSI revision: 02
> Detected scsi disk sda at scsi0, channel 0, id 6, lun 0
> 
> After this the system just stops

That's not good.  Can you try with just   sim700=nodisc:0xff
please.

Richard