Re: [parisc-linux] 712/60 boots fine

[Grant Grundler <grundler@puffin.external.hp.com>]

thunder7@xs4all.nl wrote:
> I guess that means me :-)

Uhm...yeah. :^)

> This is my current palo output:
> 
> jurriaan@pa8200:~$ sudo /sbin/palo
> palo version 0.94 bame@c3k Sat Sep  8 12:33:24 MDT 2001
> ELF32 executable
> Partition Start(MB) End(MB) Id Type
> 1               1      31   f0 Palo
> 2              32    3846   83 ext2
> 3            3847    7661   83 ext2
> 4            7662    8678   82 swap
> ipl: addr 16384 size 28672 entry 0x0
>  ko 0x0 ksz 0 k64o 0x0 k64sz 0 rdo 0 rdsz 0
> <2/boot/vmlinux-2.4.9-pa24 root=/dev/sda2 HOME=/>
> ipl: addr 16384 size 28672 entry 0x0
>  ko 0x44000 ksz 2853588 k64o 0x0 k64sz 0 rdo 0 rdsz 0
> <2/boot/vmlinux-2.4.9-pa24 root=/dev/sda2 HOME=/>
> 
> Now if I understand correctly, palo must
> 
> - warn if there is no f0 partition
> - warn if there is no ext2 partition in the first 2 Gb

warn if the partition with vmlinux (eg /boot/vmlinux) exceeds 2GB.
The problem is palo uses IODC to load data.
IODC can't access beyond 2GB due to signed numbers/offset issues.

Note that your partition 2 violates that rule.

grant