From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: To: parisc-linux@lists.parisc-linux.org Message-Id: <20011225090742.8E013482B@dsl2.external.hp.com> Date: Tue, 25 Dec 2001 02:07:42 -0700 (MST) From: grundler@dsl2.external.hp.com (Grant Grundler) Subject: [parisc-linux] 2.4.16-pa24 crashes on c3k Sender: parisc-linux-admin@lists.parisc-linux.org Errors-To: parisc-linux-admin@lists.parisc-linux.org List-Help: List-Post: List-Subscribe: , List-Id: parisc-linux developers list List-Unsubscribe: , List-Archive: Hi all, I can't boot 2.4.16-pa24 on my c3k. 2.4.16-pa20 was working fine. I'll put the defective .config, vmlinux, System.map on ftp://gsyprf10.external.hp.com/pub/c3000/2.4.16-pa24-crash.tgz I'm using serial console. But I can't capture output on my OB500 laptop. It doesn't want to talk to the serial port - no input or output. I'm not understanding why since the same settings/cable work with the OB600 (much older machine). I'll try to get a full dump available in the next couple of days one way or another. Maybe try yet another laptop. Last couple of lines before stack trace are: ... SuperIO: Found NS87560 Legacy I/O device at 00:0e.1 (IRQ 64) SuperIO: Serial port 1 at 0x3f8 SuperIO: Serial port 2 at 0x2f8 SuperIO: Parallel port at 0x378 SuperIO: Floppy controller at 0x3f0 WARNING! Stack pointer and cr30 do not correspond Dumping Stack from 12298000 to 1229c740: ... [ does not look like a valid stack trace - data patterns don't look like what I've seen before and too long ] Kernel Fault: Code=26 regs=1229c740 (Addr=00000074) GR02: 1010d51c GR30: 1229c740 IOAQ: 1010e798 IIR 4b5300e8 CR30: 1229c000 CR31: 10318000 ORIG_R28: 10326dbf grant