From: Grant Grundler <grundler@dsl2.external.hp.com>
To: HP900 PARISC mailing list <parisc-linux@lists.parisc-linux.org>
Subject: Re: [parisc-linux] Patch to enable IrDA :-)
Date: Sun, 02 Jun 2002 11:06:46 -0600 [thread overview]
Message-ID: <20020602170646.64D37482A@dsl2.external.hp.com> (raw)
In-Reply-To: Message from Jochen Friedrich <jochen@scram.de> of "Wed, 01 May 2002 02:08:48 +0200." <Pine.LNX.4.44.0205010207430.4938-100000@alpha.bocc.de>
Jochen Friedrich wrote:
> Hi,
>
> this tiny patch enables the usage of IrDA dongles on the PA-RISC :-)
No one has committed this yet since Alan Cox suggested:
| With these ifdefs for ARM and parisc maybe
|
| arg = IRDA_MODEM_BITS;
|
| and sticking that in the header would be good ?
I took a quick look.
> #ifdef TIOCM_OUT2 /* Not defined for ARM */
> arg = TIOCM_OUT2;
> +#endif
This comment is wrong:
include/asm-arm/termios.h:#define TIOCM_OUT2 0x4000
Seems every arch defines this now in include/asm-*/termios.h.
> +#ifdef CONFIG_PARISC /* PA-RISC uses OUT1 as hardware flow control bit
> */
> + arg |= TIOCM_OUT1;
> #endif
I'v re-hacked this along the lines that Alan suggested.
But given the comment was wrong, thoughts?
I'm not able to test this.
Someone else will have to test and commit.
grant
Index: include/asm-i386/termios.h
===================================================================
RCS file: /var/cvs/linux/include/asm-i386/termios.h,v
retrieving revision 1.3
diff -u -p -r1.3 termios.h
--- include/asm-i386/termios.h 2001/07/05 21:38:41 1.3
+++ include/asm-i386/termios.h 2002/06/02 17:05:03
@@ -37,6 +37,8 @@ struct termio {
#define TIOCM_OUT2 0x4000
#define TIOCM_LOOP 0x8000
+#define TIOCM_MODEM_BITS TIOCM_OUT2 /* IRDA support */
+
/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
/* line disciplines */
Index: include/asm-parisc/termios.h
===================================================================
RCS file: /var/cvs/linux/include/asm-parisc/termios.h,v
retrieving revision 1.6
diff -u -p -r1.6 termios.h
--- include/asm-parisc/termios.h 2001/07/11 17:20:32 1.6
+++ include/asm-parisc/termios.h 2002/06/02 17:05:03
@@ -37,6 +37,9 @@ struct termio {
#define TIOCM_OUT2 0x4000
#define TIOCM_LOOP 0x8000
+/* IRDA support - PA-RISC uses OUT1 as hardware flow control bit. */
+#define TIOCM_MODEM_BITS (TIOCM_OUT2 | TIOCM_OUT1)
+
/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
/* line disciplines */
Index: arch/parisc/config.in
===================================================================
RCS file: /var/cvs/linux/arch/parisc/config.in,v
retrieving revision 1.39
diff -u -p -r1.39 config.in
--- arch/parisc/config.in 2001/11/08 21:17:52 1.39
+++ arch/parisc/config.in 2002/06/02 17:05:03
@@ -128,6 +128,8 @@ if [ "$CONFIG_SCSI" != "n" ]; then
fi
endmenu
+source net/irda/Config.in
+
if [ "$CONFIG_NET" = "y" ]; then
mainmenu_option next_comment
comment 'Network device support'
Index: drivers/net/irda/irtty.c
===================================================================
RCS file: /var/cvs/linux/drivers/net/irda/irtty.c,v
retrieving revision 1.8
diff -u -p -r1.8 irtty.c
--- drivers/net/irda/irtty.c 2001/11/09 23:36:06 1.8
+++ drivers/net/irda/irtty.c 2002/06/02 17:05:03
@@ -760,14 +760,11 @@ static int irtty_set_dtr_rts(struct net_
struct irtty_cb *self;
struct tty_struct *tty;
mm_segment_t fs;
- int arg = 0;
+ int arg = TIOCM_MODEM_BITS;
self = (struct irtty_cb *) dev->priv;
tty = self->tty;
-#ifdef TIOCM_OUT2 /* Not defined for ARM */
- arg = TIOCM_OUT2;
-#endif
if (rts)
arg |= TIOCM_RTS;
if (dtr)
prev parent reply other threads:[~2002-06-02 17:06 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <jochen@scram.de>
2002-05-01 0:08 ` [parisc-linux] Patch to enable IrDA :-) Jochen Friedrich
2002-05-01 0:43 ` Alan Cox
2002-07-07 6:33 ` Grant Grundler
2002-06-02 17:06 ` Grant Grundler [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20020602170646.64D37482A@dsl2.external.hp.com \
--to=grundler@dsl2.external.hp.com \
--cc=parisc-linux@lists.parisc-linux.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox