From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from mail.centraltx.com (gapserver.centraltx.com [64.209.39.10]) by dsl2.external.hp.com (Postfix) with ESMTP id 7AFE24829 for ; Mon, 2 Sep 2002 10:40:44 -0600 (MDT) Date: Mon, 2 Sep 2002 11:37:00 -0500 Message-Id: <200209021137.AA3784507924@mail.centraltx.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii From: "marc " Reply-To: To: Subject: [parisc-linux] Kernel Panic Sender: parisc-linux-admin@lists.parisc-linux.org Errors-To: parisc-linux-admin@lists.parisc-linux.org List-Help: List-Post: List-Subscribe: , List-Id: parisc-linux developers list List-Unsubscribe: , List-Archive: Guys, I'm getting a kernel panic after trying to access my tape drive. Can anyone help me out? I tried to post all relevant info, let me know if I can provide anything else: -----------------FIRST TRY---------------- Debian GNU/Linux 3.0 seki ttyS0 seki login: root Password: Last login: Sat Nov 14 02:50:47 1992 on ttyS0 Linux seki 2.4.9-32 #1 Fri Nov 30 19:36:30 MST 2001 parisc unknown seki:~/test# tar -xvpf /dev/st0 st: Version 20010812, bufsize 32768, wrt 30720, max init. bufs 4, s/g segs 16 Attached scsi tape st0 at scsi1, channel 0, id 1, lun 0 st0: Block limits 1 - 16777215 bytes. ccio-dma.c:362: Assertion (*res_ptr & *mask_ptr) == *mask_ptr failed! Kernel panic: (*res_ptr & *mask_ptr) == *mask_ptr In interrupt handler - not syncing -----------------END FIRST TRY---------------- -----------------SECOND TRY---------------- Debian GNU/Linux 3.0 seki ttyS0 seki login: root Password: Last login: Sat Nov 14 02:41:23 1992 on ttyS0 Linux seki 2.4.9-32 #1 Fri Nov 30 19:36:30 MST 2001 parisc unknown seki:~# lsmod Module Size Used by seki:~# insmod st Using /lib/modules/2.4.9-32/kernst: Version 20010812, bufsize 32768, wrt 30720, max init. bufs 4, s/g segs 16 el/drivers/scsi/Attached scsi tape st0 at scsi1, channel 0, id 1, lun 0 st.o seki:~# cat /proc/scsi/scsi Attached devices: Host: scsi0 Channel: 00 Id: 05 Lun: 00 Vendor: SEAGATE Model: ST34371W Rev: HP03 Type: Direct-Access ANSI SCSI revision: 02 Host: scsi0 Channel: 00 Id: 06 Lun: 00 Vendor: SEAGATE Model: ST32171W Rev: HP03 Type: Direct-Access ANSI SCSI revision: 02 Host: scsi1 Channel: 00 Id: 01 Lun: 00 Vendor: SONY Model: SDT-7000 Rev: 0150 Type: Sequential-Access ANSI SCSI revision: 02 seki:~# mt -f /dev/st0 status st0: Block limits 1 - 16777215 bytes. drive type = Generic SCSI-2 tape drive status = 318767616 sense key error = 0 residue count = 0 file number = 0 block number = 0 Tape block size 512 bytes. Density code 0x13 (DDS (61000 bpi)). Soft error count since last status=0 General status bits on (41010000): BOT ONLINE IM_REP_EN seki:~# tar -cvpf /dev/st0 /tftpboot tar: Removing leading `/' from member names tftpboot/ tftpboot/tftpboot.img ccio-dma.c:362: Assertion (*res_ptr & *mask_ptr) == *mask_ptr failed! Kernel panic: (*res_ptr & *mask_ptr) == *mask_ptr In interrupt handler - not syncing -----------------END SECOND TRY---------------- -----------------BOOT INFO---------------- Firmware Version 2.7 Duplex Console IO Dependent Code (IODC) revision 1 ------------------------------------------------------------------------------ (c) Copyright 1995-1998, Hewlett-Packard Company, All rights reserved ------------------------------------------------------------------------------ Processor Speed State Coprocessor State I/D Cache --------- -------- --------------------- ----------------- ------------- 0 180 MHz Active Functional 1 MB/1 MB Central Bus Speed (in MHz) : 120 Available memory (bytes) : 805306368 Good memory required (bytes): 0 (Not Set by OS) Primary boot path: FWSCSI.6.0 Alternate boot path: SESCSI.6.0 Console path: GRAPHICS(3) Keyboard path: PS2 CPU 0 WARNING: Self tests have been disabled as a result of FASTBOOT being enabled. To enable self tests, use the FASTBOOT command in the CONFIGURATION menu and reboot the system. WARNING: Memory has been initialized, but not tested as a result of FASTBOOT being enabled. To test memory, use the FASTBOOT command in the CONFIGURATION menu and reboot the system. Processor is booting from first available device. To discontinue, press any key within 10 seconds. 10 seconds expired. Proceeding... Searching for device(s) with bootable media... This may take several minutes. To discontinue search, press any key (termination may not be immediate). Attempting to boot Primary Path... BOOTABLE DEVICE FOUND: Path Number Device Path Device Type and Utilities ----------- ----------------- ------------------------- P0 FWSCSI.6.0 SEAGATE ST32171W IPL Booting... Boot IO Dependent Code (IODC) revision 150 HARD Booted. palo ipl 0.96 root@smallone Sun Nov 11 23:23:30 UTC 2001 Partition Start(MB) End(MB) Id Type 1 1 16 f0 Palo 3 1315 2046 82 swap 5 17 1314 83 ext2 PALO(F0) partition contains: 0/vmlinux32 3122078 bytes @ 0x48000 Information: No console specified on kernel command line. This is normal. PALO will choose the console currently used by firmware (serial). Command line for kernel: 'root=/dev/sdb5 HOME=/ console=ttyS0 TERM=vt102' Selected kernel: /boot/vmlinux from partition 5 Opening /boot/vmlinux Opening /boot/vmlinux-2.4.9-32 ELF32 executable Entry 00100000 first 00100000 n 6 Segment 0 load 00100000 size 1618208 mediaptr 0x1000 Segment 1 load 0028c000 size 287728 mediaptr 0x18d000 Segment 2 load 002d4000 size 379072 mediaptr 0x1d4000 Segment 3 load 00334000 size 8192 mediaptr 0x231000 Segment 4 load 00338000 size 32768 mediaptr 0x233000 Segment 5 load 003750e8 size 83184 mediaptr 0x23b0e8 Branching to kernel entry point 0x00100000. If this is the last message you see, you may need to switch your console. This is a common symptom -- search the FAQ and mailing list at parisc-linux.org Linux version 2.4.9-32 (root@paer) (gcc version 3.0.2 (Debian)) #1 Fri Nov 30 19 :36:30 MST 2001 FP[0] enabled: Rev 0 Model 14 The 32-bit Kernel has started... Determining PDC firmware type: System Map. model 000059c0 00000481 00000000 00000002 77d14d81 100000f0 00000008 000000b2 000000b2 vers 00000205 cpuid 000001c9 CPUID vers 14 rev 9 model 9000/780/C180 Total Memory: 768 Mb pagetable_init On node 0 totalpages: 196608 zone(0): 196608 pages. zone(1): 0 pages. zone(2): 0 pages. LED display at f0190001 registered Kernel command line: root=/dev/sdb5 HOME=/ console=ttyS0 TERM=vt102 Console: colour dummy device 160x64 Calibrating delay loop... 358.80 BogoMIPS Memory: 770644k available Dentry-cache hash table entries: 131072 (order: 8, 1048576 bytes) Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) Buffer-cache hash table entries: 65536 (order: 6, 262144 bytes) Page-cache hash table entries: 262144 (order: 8, 1048576 bytes) Searching for devices... Found devices: 1. U2-IOA BC Runway Port (12) at 0xfff88000 [8], versions 0x580, 0xf, 0xb 2. Dino PCI Bridge (13) at 0xf2000000 [8/0], versions 0x680, 0x1, 0xa 3. Raven U/L2 Core FW-SCSI (4) at 0xf200c000 [8/12], versions 0x3b, 0x0, 0x89 4. Raven U/L2 Core BA (11) at 0xffd00000 [8/16], versions 0x3b, 0x0, 0x81, addi tional addresses: 0xffc00000 5. UL 350 Core Centronics (10) at 0xffd02000 [8/16/0], versions 0x2e, 0x0, 0x74, additional addresses: 0xffd03000 6. Raven U/L2 Core Audio (10) at 0xffd04000 [8/16/1], versions 0x3b, 0x4, 0x7b 7. Raven U/L2 Core RS-232 (10) at 0xffd05000 [8/16/4], versions 0x3b, 0x0, 0x8c 8. Raven U/L2 Core SCSI (10) at 0xffd06000 [8/16/5], versions 0x3b, 0x0, 0x82 9. Raven U/L2 Core LAN (802.3) (10) at 0xffd07000 [8/16/6], versions 0x3b, 0x0, 0x8a 10. Raven U/L2 Core PS/2 Port (10) at 0xffd08000 [8/16/7], versions 0x3b, 0x0, 0 x84 11. Raven U/L2 Core PS/2 Port (10) at 0xffd08100 [8/16/8], versions 0x3b, 0x0, 0 x84 12. Raven Backplane Wax BA (11) at 0xffe00000 [8/20], versions 0x17, 0x0, 0x8e 13. Raven Backplane Wax HIL (10) at 0xffe01000 [8/20/1], versions 0x17, 0x0, 0x7 3 14. Raven Backplane RS-232 (10) at 0xffe02000 [8/20/2], versions 0x17, 0x0, 0x8c 15. Raven Backplane Wax EISA BA (11) at 0xfc000000 [8/20/5], versions 0x17, 0x0, 0x90, additional addresses: 0xfc00000b 16. Gecko GSC Core Graphics (10) at 0xfa000000 [8/24], versions 0x16, 0x0, 0x85 17. U2-IOA BC GSC+ Port (7) at 0xf203f000 [8/63], versions 0x501, 0x1, 0xc 18. U2-IOA BC Runway Port (12) at 0xfff8a000 [10], versions 0x580, 0xf, 0xb 19. Coral SGC Graphics (10) at 0xf8000000 [10/8], versions 0x4, 0x0, 0x77 20. U2-IOA BC GSC+ Port (7) at 0xf103f000 [10/63], versions 0x501, 0x1, 0xc 21. Raven U 180 (9000/780/C180) (0) at 0xfffa0000 [32], versions 0x59c, 0x0, 0x4 22. Raven U 180 (1) at 0xfffb1000 [49], versions 0x72, 0x0, 0x9 CPU(s): 1 x PA8000 (PCX-U) at 180.000000 MHz ccio found U2 at 0xfff88000 io_io_low: 0xf2000000 23. Dino PCI Bridge (13) at 0xf2000000 [8/0], versions 0x680, 0x1, 0xa 24. Dino PS/2 Port (10) at 0xf2001000 [8/1], versions 0x7, 0x0, 0x96 25. Raven Backplane RS-232 (10) at 0xf2003000 [8/3], versions 0x17, 0x0, 0x8c 26. Raven U/L2 Core FW-SCSI (4) at 0xf200c000 [8/12], versions 0x3b, 0x0, 0x89 27. Raven U/L2 Core BA (11) at 0xffd00000 [8/16], versions 0x3b, 0x0, 0x81, add itional addresses: 0xffc00000 28. UL 350 Core Centronics (10) at 0xffd02000 [8/16/0], versions 0x2e, 0x0, 0x74 , additional addresses: 0xffd03000 29. Raven U/L2 Core Audio (10) at 0xffd04000 [8/16/1], versions 0x3b, 0x4, 0x7b 30. Raven U/L2 Core RS-232 (10) at 0xffd05000 [8/16/4], versions 0x3b, 0x0, 0x8c 31. Raven U/L2 Core SCSI (10) at 0xffd06000 [8/16/5], versions 0x3b, 0x0, 0x82 32. Raven U/L2 Core LAN (802.3) (10) at 0xffd07000 [8/16/6], versions 0x3b, 0x0, 0x8a 33. Raven U/L2 Core PS/2 Port (10) at 0xffd08000 [8/16/7], versions 0x3b, 0x0, 0 x84 34. Raven U/L2 Core PS/2 Port (10) at 0xffd08100 [8/16/8], versions 0x3b, 0x0, 0 x84 35. Raven Backplane Wax BA (11) at 0xffe00000 [8/20], versions 0x17, 0x0, 0x8e 36. Raven Backplane Wax HIL (10) at 0xffe01000 [8/20/1], versions 0x17, 0x0, 0x7 3 37. Raven Backplane RS-232 (10) at 0xffe02000 [8/20/2], versions 0x17, 0x0, 0x8c 38. Raven Backplane Wax EISA BA (11) at 0xfc000000 [8/20/5], versions 0x17, 0x0, 0x90, additional addresses: 0xfc00000b 39. Gecko GSC Core Graphics (10) at 0xfa000000 [8/24], versions 0x16, 0x0, 0x85 40. U2-IOA BC GSC+ Port (7) at 0xf203f000 [8/63], versions 0x501, 0x1, 0xc ccio found U2 at 0xfff8a000 io_io_low: 0xf1000000 41. Coral SGC Graphics (10) at 0xf8000000 [10/8], versions 0x4, 0x0, 0x77 42. U2-IOA BC GSC+ Port (7) at 0xf103f000 [10/63], versions 0x501, 0x1, 0xc Lasi version 0 at 0xffd00000 found. Wax at 0xffe00000 found. Wax: HIL Keyboard-NMI registered. Wax EISA Adapter found at 0xfc000000 Dino version 2.1 found at 0xf2000000 The GSCtoPCI (Dino hrev 1) bus converter found may exhibit data corruption. See Service Note Numbers: A4190A-01, A4191A-01. Systems shipped after Aug 20, 1997 will not exhibit this problem. Models affected: C180, C160, C160L, B160L, and B132L workstations. Dino: No PCI devices enabled. POSIX conformance testing by UNIFIX Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Starting kswapd v1.8 parport_init_chip: initialize bidirectional-mode. parport0: PC-style at 0xffd02800, irq 88 [PCSPP,TRISTATE] STI word mode ROM at f0084000, hpa=fa000000 STI word mode ROM, id 2d08c0a7-9a02587, conforms to spec rev. 8.07 STI device: INTERNAL_EG_1280 STI byte mode ROM at f8000000, hpa=f8000000 STI byte mode ROM, id 2bcb015a-9a02587, conforms to spec rev. 8.04 STI device: HPA4071B_LZ Console: switching to colour frame buffer device 160x64 fb0: stifb 1280x1024-8 frame buffer device, id: 2d08c0a7, mmio: 0xfa100000 fb1: stifb 1280x1024-32 frame buffer device, id: 2bcb015a, mmio: 0xf8100000 pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI en abled ttyS00 at iomem 0xffd05800 (irq = 90) is a 16550A ttyS01 at iomem 0xf2003800 (irq = 138) is a 16550A ttyS02 at iomem 0xffe02800 (irq = 121) is a 16550A Lasi PS/2 receive buffer timeout PS/2 keyboard port at 0xffd08000 (irq 69) found, no device attached. Lasi PS/2 transmit buffer timeout PS/2 psaux port at 0xffd08100 (irq 69) found, no device attached. Found HIL at 0xffe01000, IRQ 126 IRQ: CPU:0 No handler for IRQ 35 ! HIL: timed out, assuming no keyboard present. Warning : device (10, 0x17, 0x0, 0x73) NOT claimed by HIL lp0: using parport0 (interrupt-driven). Generic RTC Driver v1.02 05/27/1999 Sam Creasey (sammy@oh.verio.com) block: 128 slots per queue, batch=16 RAMDISK driver initialized: 16 RAM disks of 6144K size 1024 blocksize loop: loaded (max 8 devices) Found i82596 at 0xffd07000, IRQ 87 eth0: 82596 at 0xffd07000, 00 60 B0 18 9B B9 IRQ 87. 82596.c $Revision: 1.26 $ SCSI subsystem driver Revision: 1.00 zalon_scsi_callback: Zalon vers field is 0x1, IRQ 35 ncr53c8xx: 53c720 detected ncr53c720-0: ID 7, Fast-10, Parity Checking, Differential scsi0 : ncr53c8xx-3.4.3b-20010512 Vendor: SEAGATE Model: ST34371W Rev: HP03 Type: Direct-Access ANSI SCSI revision: 02 Vendor: SEAGATE Model: ST32171W Rev: HP03 Type: Direct-Access ANSI SCSI revision: 02 53c700: Version 2.6 By James.Bottomley@HansenPartnership.com scsi1: 53c710 rev 2 scsi1 : LASI SCSI 53c700 scsi1: (1:0) Synchronous at offset 8, period 100ns Vendor: SONY Model: SDT-7000 Rev: 0150 Type: Sequential-Access ANSI SCSI revision: 02 Attached scsi disk sda at scsi0, channel 0, id 5, lun 0 Attached scsi disk sdb at scsi0, channel 0, id 6, lun 0 ncr53c720-0-<5,*>: FAST-10 WIDE SCSI 20.0 MB/s (100 ns, offset 8) SCSI device sda: 8388314 512-byte hdwr sectors (4295 MB) Partition check: sda: sda1 ncr53c720-0-<6,*>: FAST-10 WIDE SCSI 20.0 MB/s (100 ns, offset 8) SCSI device sdb: 4194685 512-byte hdwr sectors (2148 MB) sdb: sdb1 sdb2 < sdb5 > sdb3 Lasi Harmony Audio rev. 2 at 0xffd04000, using IRQ 82 sticonsole_init: searching for STI ROMs md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP IP: routing cache hash table of 8192 buckets, 64Kbytes TCP: Hash tables configured (established 262144 bind 65536) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. VFS: Mounted root (ext2 filesystem) readonly. INIT: version 2.84 booting Activating swap. Adding Swap: 749788k swap-space (priority -1) Checking root file system... fsck 1.27 (8-Mar-2002) /dev/sdb5: clean, 3167/166496 files, 32915/332312 blocks System time was Fri Nov 13 19:56:56 UTC 1992. Setting the System Clock using the Hardware Clock as reference... System Clock set. System local time is now Fri Nov 13 19:57:04 UTC 1992. Calculating module dependencies... done. Loading modules: Note: /etc/modules.conf is more recent than /lib/modules/2.4.9-32/modules.dep modprobe: Can't locate module * Checking all file systems... fsck 1.27 (8-Mar-2002) /dev/sda1: clean, 21754/524288 files, 116146/1048265 blocks Setting kernel variables. Mounting local filesystems... /dev/sda1 on /usr type ext2 (rw) Running 0dns-down to make sure resolv.conf is ok...done. Cleaning: /etc/network/ifstate. Setting up IP spoofing protection: rp_filter. Configuring network interfaces: eth0: Transceiver problem. ip_local_deliver: bad loopback skb: PRE_ROUTING LOCAL_IN skb: pf=2 (unowned) dev=lo len=328 PROTO=17 0.0.0.0:68 255.255.255.255:67 L=328 S=0x10 I=0 F=0x0000 T=16 ip_local_deliver: bad loopback skb: PRE_ROUTING LOCAL_IN skb: pf=2 (unowned) dev=lo len=328 PROTO=17 0.0.0.0:68 255.255.255.255:67 L=328 S=0x10 I=0 F=0x0000 T=16 ip_local_deliver: bad loopback skb: PRE_ROUTING LOCAL_IN skb: pf=2 (unowned) dev=lo len=328 PROTO=17 0.0.0.0:68 255.255.255.255:67 L=328 S=0x10 I=0 F=0x0000 T=16 ip_local_deliver: bad loopback skb: PRE_ROUTING LOCAL_IN skb: pf=2 (unowned) dev=lo len=328 PROTO=17 0.0.0.0:68 255.255.255.255:67 L=328 S=0x10 I=0 F=0x0000 T=16 ip_local_deliver: bad loopback skb: PRE_ROUTING LOCAL_IN skb: pf=2 (unowned) dev=lo len=328 PROTO=17 0.0.0.0:68 255.255.255.255:67 L=328 S=0x10 I=0 F=0x0000 T=16 ip_local_deliver: bad loopback skb: PRE_ROUTING LOCAL_IN skb: pf=2 (unowned) dev=lo len=328 PROTO=17 0.0.0.0:68 255.255.255.255:67 L=328 S=0x10 I=0 F=0x0000 T=16 Setting the System Clock using the Hardware Clock as reference... System Clock set. Local time: Fri Nov 13 13:57:56 CST 1992 Cleaning: /tmp /var/lock /var/run. Initializing random number generator... done. Recovering nvi editor sessions... done. INIT: Entering runlevel: 2 Starting system log daemon: syslogd. Starting kernel log daemon: klogd. Starting DHCP server: dhcp. Starting internet superserver: inetd. /usr/share/sendmail/sendmail not found/executable, aborting. Starting OpenBSD Secure Shell server: sshd. Starting periodic command scheduler: cron. -----------------END BOOT INFO----------------