Re: [parisc-linux] Re: partial success with matroxfb

[Andreas Seltenreich <s_selten@informatik.uni-karlsruhe.de>]

* Petr Vandrovec <VANDROVE@vc.cvut.cz> [2002-09-20 18:12]:
> Can you verify (with lspci -xxx) that PCI dword register 0x40 in
> matroxfb
> configuration space has not set bit 8 (it is lowest bit in register
> 0x41). 0=>disable legacy VGA, 1=>enable legacy VGA. Old Millennium I
> always responded to framebuffer accesses, and it was fixed in
> Millennium II.
> I thought that it was fixed in Mystique too. You can fix it with
> setpci, if matroxfb gets it wrong.

apparently it is set:
40: 00 01 00 5f 00 00 00 00 ff ff ff ff 00 00 00 00

If I modporbe it without setting it, the bit keeps set:
40: 21 4f 09 df 00 3c 00 00 06 ff ff 06 00 00 00 00

after manually setting it to 0 and modprobing matroxfb it kept the zero:
40: 21 4e 09 df 00 3c 00 00 10 ff ff 10 00 00 00 00

but the crash still occured.

> Strange. Stalls it for 5 seconds here, or goes it through immediately?

I can't notice any delay when it passes the second time.

regards
andreas