From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from www.linux.org.uk (parcelfarce.linux.theplanet.co.uk [195.92.249.252]) by dsl2.external.hp.com (Postfix) with ESMTP id 50DD64829 for ; Tue, 24 Sep 2002 06:29:38 -0600 (MDT) Received: from willy by www.linux.org.uk with local (Exim 3.33 #5) id 17tooo-0004e4-00; Tue, 24 Sep 2002 13:29:34 +0100 Date: Tue, 24 Sep 2002 13:29:34 +0100 From: Matthew Wilcox To: Arto Jantunen Cc: Jeremy Drake , parisc-linux@lists.parisc-linux.org Subject: Re: [parisc-linux] SMP problems Message-ID: <20020924132934.F27458@parcelfarce.linux.theplanet.co.uk> References: <20020924060541.GA27852@dt-link.fi> <20020924112830.GA27877@dt-link.fi> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii In-Reply-To: <20020924112830.GA27877@dt-link.fi>; from viiru@debian.org on Tue, Sep 24, 2002 at 02:28:30PM +0300 Sender: parisc-linux-admin@lists.parisc-linux.org Errors-To: parisc-linux-admin@lists.parisc-linux.org List-Help: List-Post: List-Subscribe: , List-Id: parisc-linux developers list List-Unsubscribe: , List-Archive: On Tue, Sep 24, 2002 at 02:28:30PM +0300, Arto Jantunen wrote: > I have a HP9000/D390. Dual PA-8200. It doesn't boot at all with that > kernel or any other 64-bit kernel. Some things do suggest that it should > work, but it doesn't. After the kernel branching point it starts > scrolling FLT codes on the LCD display, but doesn't report anything on > the console. I have a ser pim output taken out after rebooting the box > if someone is interrested. I'll try building the latest CVS with 32-bit > and SMP and see if it's any better then the ones I have tried so far. Do you have the CAP/MUX card installed? (the card with the other serial port on it) If so, you should enable "Serial MUX support" and make sure to use console=ttyB0 on the command line (ie pretend you have a K class machine). -- Revolutions do not require corporate support.