From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from baldric (baldric.uwo.ca [129.100.10.225]) by dsl2.external.hp.com (Postfix) with ESMTP id 485BE482D for ; Mon, 14 Jul 2003 12:24:55 -0600 (MDT) Received: from carlos by baldric with local (Exim 3.35 #1 (Debian)) id 19c7zH-00028N-00 for ; Mon, 14 Jul 2003 14:23:47 -0400 Date: Mon, 14 Jul 2003 14:23:47 -0400 From: Carlos O'Donell To: parisc-linux@lists.parisc-linux.org Message-ID: <20030714182347.GC14114@systemhalted> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Subject: [parisc-linux] 2.4.21-paX on an rp2430 Sender: parisc-linux-admin@lists.parisc-linux.org Errors-To: parisc-linux-admin@lists.parisc-linux.org List-Help: List-Post: List-Subscribe: , List-Id: parisc-linux developers list List-Unsubscribe: , List-Archive: pa, Downloaded vmlinux-64-2.4.21-pa2 from cvs.parisc-linux.org palo --commandline='0/vmlinux64 console=/dev/ttyS0 root=/dev/sda2' \ -k ./vmlinux-64-2.4.21-pa2 \ -s ./lifimage64 Then proceeded to netboot this kernel from a new rp2430, and I didn't get very far :( Has anyone tried testing the prebuilt kernels on newer machines? I also tried a newer vmlinux-2.4.20-pa10-UP and the kernel oopses :( --- Main Menu: Enter command or menu > bo lan Interact with IPL (Y, N, or Cancel)?> y Booting... Network Station Address 00306e-48a712 System IP Address 192.168.1.200 Server IP Address 192.168.1.222 Boot IO Dependent Code (IODC) revision 2 HARD Booted. palo ipl 1.2 root@b2000 Tue Jan 14 13:13:07 MST 2003 Boot image contains: 0/vmlinux64 5196863 bytes @ 0x8800 Current command line: 0/vmlinux64 console=/dev/ttyS0 root=/dev/sda2 0: 0/vmlinux64 1: console=/dev/ttyS0 2: root=/dev/sda2 Edit which field? (or 'b' to boot with this command line)? b Command line for kernel: 'console=/dev/ttyS0 root=/dev/sda2 palo_kernel=0/vmlinux64' Selected kernel: /vmlinux64 from partition 0 ELF64 executable Entry 00100000 first 00100000 n 4 Segment 0 load 00100000 size 2789296 mediaptr 0x1000 Segment 1 load 003aa000 size 1012928 mediaptr 0x2aa000 Segment 2 load 004a4000 size 319568 mediaptr 0x3a2000 Segment 3 load 004f4000 size 49152 mediaptr 0x3f1000 Branching to kernel entry point 0x00100000. If this is the last message you see, you may need to switch your console. This is a common symptom -- search the FAQ and mailing list at parisc-linux.org ********** VIRTUAL FRONT PANEL ********** System Boot detected ***************************************** LEDs: RUN ATTENTION FAULT REMOTE POWER ON FLASH OFF ON ON LED State: There was a system interruption that did not take the system down. Check Chassis and Console Logs for error messages. processor system initialization 1C00 processor system initialization 1C00