From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from baldric (baldric.uwo.ca [129.100.10.225]) by dsl2.external.hp.com (Postfix) with ESMTP id 6D751482D for ; Wed, 16 Jul 2003 18:16:42 -0600 (MDT) Date: Wed, 16 Jul 2003 20:15:28 -0400 From: Carlos O'Donell To: parisc-linux@lists.parisc-linux.org, Randolph Chung , Matthew Wilcox Message-ID: <20030717001528.GA20610@systemhalted> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Subject: [parisc-linux] 2.6.0-test1-pa1, fails, to, boot, on, rp2430 Sender: parisc-linux-admin@lists.parisc-linux.org Errors-To: parisc-linux-admin@lists.parisc-linux.org List-Help: List-Post: List-Subscribe: , List-Id: parisc-linux developers list List-Unsubscribe: , List-Archive: pa, My rp2430 has yet to boot into a usable userspace, it always dies at some point after serial console setup. Today for fun I reseated everything, added ram upto 1.5GB, and stuck in my PCI Matrox II card into the first PCI slot. I don't get any further than the end of the output. Any thoughts about PCI problems would be welcome :) The output is as follows: --- Command line for kernel: 'console=/dev/ttyS0 root=/dev/sda2 palo_kernel=0/vmlinux64' Selected kernel: /vmlinux64 from partition 0 ELF64 executable Entry 00100000 first 00100000 n 1 Segment 0 load 00100000 size 4219008 mediaptr 0x1000 Branching to kernel entry point 0x00100000. If this is the last message you see, you may need to switch your console. This is a common symptom -- search the FAQ and mailing list at parisc-linux.org Linux version 2.6.0-test1-pa0 (tausq@ios) (gcc version 3.0.4) #112 Tue Jul 15 22:35:45 PDT 2003 FP[0] enabled: Rev 1 Model 19 The 64-bit Kernel has started... Determining PDC firmware type: 64 bit PAT. model 00005e20 00000491 00000000 00000001 6dd843ae 100000f0 00000008 000000b2 000000b2 vers 00000203 CPUID vers 19 rev 8 (0x00000268) capabilities 0x5 model 9000/800/A500-6X Total Memory: 1536 Mb pagetable_init On node 0 totalpages: 393216 DMA zone: 393216 pages, LIFO batch:16 Normal zone: 0 pages, LIFO batch:1 HighMem zone: 0 pages, LIFO batch:1 Building zonelist for node : 0 Kernel command line: console=/dev/ttyS0 root=/dev/sda2 palo_kernel=0/vmlinux64 PID hash table entries: 16 (order 4: 256 bytes) Console: colour dummy device 160x64 Calibrating delay loop... 1294.33 BogoMIPS Memory: 1534524k available Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) Mount-cache hash table entries: 256 (order: 0, 4096 bytes) -> /dev -> /dev/console -> /root POSIX conformance testing by UNIFIX Initializing RT netlink socket Searching for devices... Found devices: 1. Crescendo 650 W2 (0) at 0xfffffffffffa0000 [160], versions 0x5e2, 0x0, 0x4 2. Astro BC Runway Port (12) at 0xfffffffffed00000 [0], versions 0x582, 0x0, 0xb 3. Elroy PCI Bridge (13) at 0xfffffffffed30000 [0/0], versions 0x782, 0x0, 0xa 4. Elroy PCI Bridge (13) at 0xfffffffffed34000 [0/2], versions 0x782, 0x0, 0xa 5. Elroy PCI Bridge (13) at 0xfffffffffed38000 [0/4], versions 0x782, 0x0, 0xa 6. Elroy PCI Bridge (13) at 0xfffffffffed3c000 [0/6], versions 0x782, 0x0, 0xa 7. Memory (1) at 0xfffffffffed08000 [8], versions 0x9b, 0x0, 0x9 CPU(s): 1 x PA8700 (PCX-W2) at 650.000000 MHz SBA found Astro 2.1 at 0xfffffffffed00000 lba version TR4.0 (0x5) found at 0xfffffffffed30000 kernel BUG at arch/parisc/kernel/pci.c:338! Kernel addresses on the stack: [<000000001010e3d8>] show_trace+0x40/0x110 [<000000001010e224>] dump_stack+0x24/0x38 [<0000000010117d00>] pcibios_register_hba+0x70/0xc8 [<00000000104a3b18>] lba_common_init+0x38/0x68 [<00000000104a3ce4>] lba_driver_callback+0x19c/0x300 [<00000000101c9b88>] sysfs_create_dir+0xa0/0x168 [<0000000010113a10>] parisc_driver_probe+0x48/0x90 [<0000000010280688>] bus_match+0x70/0xb8 [<0000000010280818>] driver_attach+0x98/0xa8 [<0000000010280b68>] bus_add_driver+0xd8/0xf0 [<0000000010112b70>] pdc_pat_get_irt+0x48/0x68 [<0000000010281098>] driver_register+0x48/0x60 [<0000000010113c28>] register_parisc_driver+0x158/0x170 [<00000000104a3e6c>] lba_init+0x24/0x38 [<00000000104965f4>] parisc_init+0x114/0x130 [<000000001049096c>] do_initcalls+0x84/0x120 [<0000000010490a50>] do_basic_setup+0x48/0x78 [<00000000101003b8>] init+0x38/0x238 [<000000001010947c>] ret_from_kernel_thread+0x24/0x38 lba range[2] : ignoring GMMIO (0xfffffff804000000) PCI: No parent found for region 6 of device 0000:00:00.0 [ffffffffb7f00000:ffffffffb7f3ffff] lba version TR4.0 (0x5) found at 0xfffffffffed34000 kernel BUG at arch/parisc/kernel/pci.c:338! Kernel addresses on the stack: [<000000001010e3d8>] show_trace+0x40/0x110 [<000000001010e224>] dump_stack+0x24/0x38 [<0000000010117d00>] pcibios_register_hba+0x70/0xc8 [<00000000104a3b18>] lba_common_init+0x38/0x68 [<00000000104a3ce4>] lba_driver_callback+0x19c/0x300 [<00000000101139b4>] claim_device+0x34/0x48 [<0000000010113a10>] parisc_driver_probe+0x48/0x90 [<0000000010280688>] bus_match+0x70/0xb8 [<0000000010280818>] driver_attach+0x98/0xa8 [<0000000010280b68>] bus_add_driver+0xd8/0xf0 [<0000000010112b70>] pdc_pat_get_irt+0x48/0x68 [<0000000010281098>] driver_register+0x48/0x60 [<0000000010113c28>] register_parisc_driver+0x158/0x170 [<00000000104a3e6c>] lba_init+0x24/0x38 [<00000000104965f4>] parisc_init+0x114/0x130 [<000000001049096c>] do_initcalls+0x84/0x120 [<0000000010490a50>] do_basic_setup+0x48/0x78 [<00000000101003b8>] init+0x38/0x238 [<000000001010947c>] ret_from_kernel_thread+0x24/0x38 lba range[2] : ignoring GMMIO (0xfffffff904000000) --- c.