From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from colo.lackof.org (colo.lackof.org [198.49.126.79]) by dsl2.external.hp.com (Postfix) with ESMTP id F391E484B for ; Mon, 16 Feb 2004 23:42:25 -0700 (MST) Date: Mon, 16 Feb 2004 23:42:24 -0700 From: Grant Grundler To: John David Anglin Subject: Re: [parisc-linux] HP1825 and PCI Vis-EG at 1600x1200 Message-ID: <20040217064224.GC22688@colo.lackof.org> References: <20040204051928.GA16054@colo.lackof.org> <200402170230.i1H2UVff020209@hiauly1.hia.nrc.ca> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii In-Reply-To: <200402170230.i1H2UVff020209@hiauly1.hia.nrc.ca> Cc: parisc-linux@lists.parisc-linux.org List-Id: parisc-linux developers list List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , On Mon, Feb 16, 2004 at 09:30:31PM -0500, John David Anglin wrote: > > I'll hunt a bit more on the internet since I'm pretty sure > > I've seen some of the HP parisc workstations allow for > > a "custom" video output but don't know if Vis-EG allows > > that or where the steps to do it are described. > > If I recall, there is a line in the list of settings for the > Vis-EG for user defined settings. However, I couldn'd figure > out how to set them. Yup, that's exactly what I was looking for. I've seen that once upon a time but it might have been on an HP internal website for a different card. My fear is I have to run HPUX and "setmon" to get the custom settings. Anyway, I gave up on this since it looks the manual for the "HP 1825" really only supports 1280x1024 and the manual is derived or shared with the "HP 2025" (20") flat panel display. Thus the comment about 1600x1200 probably only applies to the 20" display. thanks, grant