Linux PARISC architecture development
 help / color / mirror / Atom feed
From: Mike Frysinger <vapier@gentoo.org>
To: parisc-linux@parisc-linux.org
Subject: [parisc-linux] linux-2.6.10-pa1 panic on C360 in SCSI driver
Date: Sun, 26 Dec 2004 05:04:40 -0500	[thread overview]
Message-ID: <200412260504.40205.vapier@gentoo.org> (raw)

[-- Attachment #1: Type: text/plain, Size: 358 bytes --]

seems to be a new bug because building a 2.6.8.1-pa7 kernel with same .config 
works fine while a 2.6.10-pa1 panics ;(

find attached:
2.6.10-pa1-scsi-panic - dmesg output from scsi driver up through panic
2.6.8.1-pa11-dmesg - scsi dmesg output from a good kernel
config.bz2 - my .config from 2.6.10-pa1

build system:
gcc-3.3.5 + binutils-2.15.92.0.2
-mike

[-- Attachment #2: 2.6.10-pa1-scsi-panic --]
[-- Type: text/plain, Size: 2345 bytes --]

sym0: <875> rev 0x4 at pci 0000:00:13.0 irq 99
sym0: No NVRAM, ID 7, Fast-20, SE, parity checking
sym0: SCSI BUS has been reset.
scsi0 : sym-2.1.18m
elevator: using anticipatory as default io scheduler
  Vendor: IBM       Model: DDRS-34560WS      Rev: HP01
  Type:   Direct-Access                      ANSI SCSI revision: 02
sym0:6:0: tagged command queuing enabled, command queue depth 16.
 target0:0:6: Beginning Domain Validation
sym0:6: wide asynchronous.
sym0:6: FAST-20 WIDE SCSI 40.0 MB/s ST (50.0 ns, offset 15)
 target0:0:6: Domain Validation skipping write tests
 target0:0:6: Ending Domain Validation
sym0:9: FAST-20 WIDE SCSI 40.0 MB/s ST (50.0 ns, offset 16)
  Vendor: WDIGTL    Model: WDE9150 ULTRA3    Rev: 1.30
  Type:   Direct-Access                      ANSI SCSI revision: 03
sym0:9:0: tagged command queuing enabled, command queue depth 16.
 target0:0:9: Beginning Domain Validation
sym0:9: asynchronous.
sym0:9: wide asynchronous.
Backtrace:
 [<102a51a8>] sym_ppr_nego+0x44/0xe0
 [<1029d6ec>] sym53c8xx_intr+0x30/0x80
 [<10106ca8>] do_irq+0x158/0x160
 [<102424d4>] dino_isr+0xf0/0x100
 [<10106ca8>] do_irq+0x158/0x160
 [<10106dac>] do_cpu_irq_mask+0xfc/0x10c
 [<1010c068>] intr_return+0x0/0x14
 [<1022ab20>] idr_get_new_above_int+0x98/0x15c
 [<1017442c>] generic_permission+0xa8/0x1a0
 [<10162ca0>] shmem_symlink+0x1d8/0x244
 [<1017758c>] vfs_rmdir+0x12c/0x254
 [<10112744>] cpu_idle+0x38/0x3c
 [<10440804>] start_kernel+0x1b8/0x1e4


Kernel Fault: Code=13 regs=10434640 (Addr=00000000)

     YZrvWESTHLNXBCVMcbcbcbcbOGFRQPDI
PSW: 00000000000001001111111100001110 Not tainted
r00-03  00000000 ffffffff 104345c8 00000000
r04-07  10fbd000 00000000 00000010 00000001
r08-11  0000000a 10fbd310 00000009 00000000
r12-15  103ff810 00000000 000000fd f0100000
r16-19  10434140 f0000154 f000014c 02625a00
r20-23  fffffffc 00000000 ffffffff 104345c9
r24-27  0000000a 00000000 01312cff 103d3010
r28-31  000000fa 10400188 10434640 102a0810
sr0-3   00000000 00000000 00000000 00000000
sr4-7   00000000 00000000 00000000 00000000

IASQ: 00000000 00000000 IAOQ: 1023112c 10231130
 IIR: b3202000    ISR: 10240001  IOR: 0d034630
 CPU:        0   CR30: 10434000 CR31: 10438000
 ORIG_R28: 00000000
 IAOQ[0]: $$divU+0xc/0x210
 IAOQ[1]: $$divU+0x10/0x210
 RP(r2): 0x104345c8
Kernel panic - not syncing: Kernel Fault
 <0>Rebooting in 3 seconds..

[-- Attachment #3: config.bz2 --]
[-- Type: application/x-bzip2, Size: 4433 bytes --]

[-- Attachment #4: 2.6.8.1-pa11-dmesg --]
[-- Type: text/plain, Size: 3661 bytes --]

sym0: <875> rev 0x4 at pci 0000:00:13.0 irq 99
sym0: No NVRAM, ID 7, Fast-20, SE, parity checking
sym0: SCSI BUS has been reset.
scsi0 : sym-2.1.18j
Using anticipatory io scheduler
  Vendor: IBM       Model: DDRS-34560WS      Rev: HP01
  Type:   Direct-Access                      ANSI SCSI revision: 02
sym0:6:0: tagged command queuing enabled, command queue depth 16.
scsi(0:0:6:0): Beginning Domain Validation
sym0:6: wide asynchronous.
sym0:6: FAST-20 WIDE SCSI 40.0 MB/s ST (50.0 ns, offset 15)
scsi(0:0:6:0): Domain Validation skipping write tests
scsi(0:0:6:0): Ending Domain Validation
sym0:9: FAST-20 WIDE SCSI 40.0 MB/s ST (50.0 ns, offset 16)
  Vendor: WDIGTL    Model: WDE9150 ULTRA3    Rev: 1.30
  Type:   Direct-Access                      ANSI SCSI revision: 03
sym0:9:0: tagged command queuing enabled, command queue depth 16.
scsi(0:0:9:0): Beginning Domain Validation
sym0:9: FAST-20 SCSI 20.0 MB/s ST (50.0 ns, offset 16)
sym0:9: FAST-20 WIDE SCSI 40.0 MB/s ST (50.0 ns, offset 16)
scsi(0:0:9:0): Write Buffer failure 8000002
scsi(0:0:9:0): Domain Validation detected failure, dropping back
sym0:9: FAST-10 WIDE SCSI 20.0 MB/s ST (100.0 ns, offset 16)
scsi(0:0:9:0): Write Buffer failure 8000002
scsi(0:0:9:0): Domain Validation detected failure, dropping back
sym0:9: FAST-10 WIDE SCSI 13.5 MB/s ST (148.0 ns, offset 16)
scsi(0:0:9:0): Write Buffer failure 8000002
scsi(0:0:9:0): Domain Validation detected failure, dropping back
sym0:9: FAST-5 WIDE SCSI 8.9 MB/s ST (224.0 ns, offset 16)
scsi(0:0:9:0): Write Buffer failure 8000002
scsi(0:0:9:0): Domain Validation detected failure, dropping back
sym0:9: wide asynchronous.
sym0:9:0:M_REJECT to send for : 1-3-1-57-10.
sym0:9: FAST-20 WIDE SCSI 40.0 MB/s ST (50.0 ns, offset 16)
scsi(0:0:9:0): Write Buffer failure 8000002
scsi(0:0:9:0): Domain Validation detected failure, dropping back
sym0:9: wide asynchronous.
sym0:9: FAST-20 WIDE SCSI 40.0 MB/s ST (50.0 ns, offset 16)
scsi(0:0:9:0): Write Buffer failure 8000002
scsi(0:0:9:0): Domain Validation detected failure, dropping back
sym0:9: wide asynchronous.
sym0:9: FAST-20 WIDE SCSI 40.0 MB/s ST (50.0 ns, offset 16)
scsi(0:0:9:0): Write Buffer failure 8000002
scsi(0:0:9:0): Domain Validation Failure, dropping back to Asynchronous
scsi(0:0:9:0): Ending Domain Validation
sym0:9: wide asynchronous.
53c700: Version 2.8 By James.Bottomley@HansenPartnership.com
scsi1: 53c710 rev 2 
scsi1 : LASI SCSI 53c700
  Vendor: TOSHIBA   Model: CD-ROM XM-5301TA  Rev: 1895
  Type:   CD-ROM                             ANSI SCSI revision: 02
scsi(1:0:2:0): Beginning Domain Validation
scsi1: (2:0) Asynchronous
scsi1: (2:0) Synchronous at offset 8, period 236ns
scsi(1:0:2:0): Domain Validation skipping write tests
scsi(1:0:2:0): Ending Domain Validation
SCSI device sda: 8388314 512-byte hdwr sectors (4295 MB)
SCSI device sda: drive cache: write back
 sda: sda1 sda2 sda3 sda4
Attached scsi disk sda at scsi0, channel 0, id 6, lun 0
SCSI device sdb: 17873040 512-byte hdwr sectors (9151 MB)
SCSI device sdb: drive cache: write back
 sdb: unknown partition table
Attached scsi disk sdb at scsi0, channel 0, id 9, lun 0
sr0: scsi-1 drive
Uniform CD-ROM driver Revision: 3.20
Attached scsi CD-ROM sr0 at scsi1, channel 0, id 2, lun 0
Attached scsi generic sg0 at scsi0, channel 0, id 6, lun 0,  type 0
Attached scsi generic sg1 at scsi0, channel 0, id 9, lun 0,  type 0
Attached scsi generic sg2 at scsi1, channel 0, id 2, lun 0,  type 5
STI GSC/PCI core graphics driver Version 0.9a
STI PCI graphic ROM found at f1ff0000 (64 kB), fb at f6000000 (32 MB)
    id 2d08c0a7-9a02587, conforms to spec rev. 8.0a
    graphics card name: PCI_GRAFFITIX1280

[-- Attachment #5: Type: text/plain, Size: 169 bytes --]

_______________________________________________
parisc-linux mailing list
parisc-linux@lists.parisc-linux.org
http://lists.parisc-linux.org/mailman/listinfo/parisc-linux

             reply	other threads:[~2004-12-26 10:04 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2004-12-26 10:04 Mike Frysinger [this message]
2004-12-26 17:37 ` [parisc-linux] linux-2.6.10-pa1 panic on C360 in SCSI driver Matthew Wilcox
2004-12-26 17:42   ` Kyle McMartin
2004-12-27  0:26   ` Joel Soete
2004-12-27  0:49     ` Matthew Wilcox
2004-12-28  1:45       ` Mike Frysinger
2004-12-28  3:30         ` James Bottomley
2004-12-28  3:49           ` Mike Frysinger
2004-12-28  3:35         ` Matthew Wilcox
2004-12-28  4:01           ` Mike Frysinger
2004-12-29  3:43             ` Matthew Wilcox
2004-12-29 19:19               ` Mike Frysinger
2004-12-29 21:28                 ` James Bottomley
2004-12-29 21:49                   ` Mike Frysinger
2004-12-29 21:54                     ` Mike Frysinger
2004-12-29 22:03                     ` Matthew Wilcox
2004-12-29 22:37                     ` James Bottomley
2004-12-29 23:16                       ` Mike Frysinger
2004-12-30 17:04                         ` James Bottomley
2004-12-30 20:43                           ` Mike Frysinger
     [not found]                 ` <200501011839.13090.vapier@gentoo.org>
2005-01-02  0:58                   ` Matthew Wilcox
2005-01-04  6:01   ` Randolph Chung

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=200412260504.40205.vapier@gentoo.org \
    --to=vapier@gentoo.org \
    --cc=parisc-linux@parisc-linux.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox