Linux PARISC architecture development
 help / color / mirror / Atom feed
From: Helge Deller <deller@gmx.de>
To: parisc-linux@lists.parisc-linux.org
Cc: James.Bottomley@HansenPartnership.com
Subject: [parisc-linux] NCR_700 problems on 715/64 with 2.6.11-rc4-pa1
Date: Sat, 19 Feb 2005 12:34:30 +0100	[thread overview]
Message-ID: <200502191234.30310.deller@gmx.de> (raw)

I get random messages from the 53c700 scsi driver (see below). 
Any ideas ?
Helge

System LOG:

Linux version 2.6.11-rc4-pa1 (root@p100) (gcc version 3.3.4 (Debian 1:3.3.4-11)) #170 Sat Feb 19 12:04:12 CET 2005
FP[0] enabled: Rev 1 Model 13
The 32-bit Kernel has started...
Determining PDC firmware type: Snake.
model 000060a0 00000481 00000000 00000000 773c7d2c 00000000 00000004 00000072 00000072
vers  0000000c
model 9000/715
Total Memory: 160 Mb
Built 1 zonelists                                                                                                                         
.....
53c700: Version 2.8 By James.Bottomley@HansenPartnership.com
scsi0: 53c710 rev 2
scsi0 : LASI SCSI 53c700
  Vendor: QUANTUM   Model: FIREBALL_TM3200S  Rev: 300X
  Type:   Direct-Access                      ANSI SCSI revision: 02
 target0:0:6: Beginning Domain Validation
scsi0: (6:0) Enabling Tag Command Queuing
scsi0: (6:0) Asynchronous
 target0:0:6: Domain Validation skipping write tests
scsi0: (6:0) Synchronous at offset 8, period 100ns
 target0:0:6: Ending Domain Validation
st: Version 20041025, fixed bufsize 32768, s/g segs 256
SCSI device sda: 6281856 512-byte hdwr sectors (3216 MB)
SCSI device sda: drive cache: write back
SCSI device sda: 6281856 512-byte hdwr sectors (3216 MB)
SCSI device sda: drive cache: write back
 sda: sda1 sda2 sda3 sda4
Attached scsi disk sda at scsi0, channel 0, id 6, lun 0
Attached scsi generic sg0 at scsi0, channel 0, id 6, lun 0,  type 0                                                                       
...



in dmesg (at random times):
_raw_foo() called with bad address 0xf0106121
Backtrace:
 [<10104ce4>] __raw_bad_addr+0x64/0x70
 [<1028edd8>] NCR_700_start_command+0x3e8/0x78c
 [<10290684>] NCR_700_queuecommand+0x2fc/0x440
 [<1026cf30>] scsi_dispatch_cmd+0x164/0x238
 [<10272ba4>] scsi_request_fn+0x18c/0x354
 [<10250454>] __generic_unplug_device+0x4c/0x54
 [<10250470>] generic_unplug_device+0x14/0x24
 [<102504b0>] blk_backing_dev_unplug+0x30/0x38
 [<10169038>] sync_buffer+0x54/0x58
 [<10103708>] __wait_on_bit+0xd4/0xe0
 [<101037c4>] out_of_line_wait_on_bit+0xb0/0xcc
 [<101ba2a4>] journal_commit_transaction+0xe68/0x1028
 [<101bc7ac>] kjournald+0xc0/0x240
 [<1010bc5c>] ret_from_kernel_thread+0x1c/0x24


and:
__raw_foo() called with bad address 0xf0106122
Backtrace:
 [<10104ce4>] __raw_bad_addr+0x64/0x70
 [<1028f200>] NCR_700_intr+0x84/0x120c
 [<10142cfc>] handle_IRQ_event+0x50/0xa4
 [<10142e78>] __do_IRQ+0x128/0x174
 [<102163dc>] gsc_asic_intr+0xac/0xc8
 [<10142cfc>] handle_IRQ_event+0x50/0xa4
 [<10142e78>] __do_IRQ+0x128/0x174
 [<101072a0>] do_cpu_irq_mask+0x7c/0xd8
 [<1010c068>] intr_return+0x0/0x14
_______________________________________________
parisc-linux mailing list
parisc-linux@lists.parisc-linux.org
http://lists.parisc-linux.org/mailman/listinfo/parisc-linux

             reply	other threads:[~2005-02-19 11:34 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2005-02-19 11:34 Helge Deller [this message]
2005-02-19 14:00 ` [parisc-linux] NCR_700 problems on 715/64 with 2.6.11-rc4-pa1 Michael S. Zick
2005-02-19 14:59   ` Helge Deller
2005-02-19 15:20     ` Michael S. Zick
2005-02-19 16:40 ` Matthew Wilcox
2005-02-19 16:53   ` Matthew Wilcox
2005-02-19 22:12     ` Joel Soete
2005-02-20 12:32     ` Helge Deller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=200502191234.30310.deller@gmx.de \
    --to=deller@gmx.de \
    --cc=James.Bottomley@HansenPartnership.com \
    --cc=parisc-linux@lists.parisc-linux.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox