From mboxrd@z Thu Jan 1 00:00:00 1970 From: "Michael S. Zick" Subject: Re: [parisc-linux] [RE:] Installation Prolblem on model 712 Date: Fri, 4 Mar 2005 07:37:18 -0600 Message-ID: <200503040737.18635.mszick@wolfbutter.com> References: <20050304112112.57017.qmail@web26809.mail.ukl.yahoo.com> Mime-Version: 1.0 Content-Type: text/plain; charset="utf-8" To: parisc-linux@lists.parisc-linux.org Return-Path: In-Reply-To: <20050304112112.57017.qmail@web26809.mail.ukl.yahoo.com> List-Id: parisc-linux developers list List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: parisc-linux-bounces@lists.parisc-linux.org On Fri March 4 2005 05:21, =CE=9C=CE=AC=CF=81=CE=B9=CE=BF=CF=82 =CE=9A. wro= te: >=20 > This is my dmesg output >=20 > The model is 712-60 and not 612 >=20 > I am begging to suspect the error vomes from the cd-rom >=20 Possible, but the installer read the kernel and the=20 initial ram-disk from it. > It is a very old cd-rom. >=20 > The cd i burned it is good quality and have been written in 4x speed >=20 What kernel is this? These messages look as if they are from a very old kernel. > =20 >=20 > =20 >=20 > SCSI subsystem driver Revision: 1.00 >=20 > 53c700: version 2.6 By James... >=20 > SCSI0: 53c710 rev 2 >=20 > SCSI0: LASI SCSI 53c700 >=20 > SCSI0: (3:0) Synchronous at offest 8, period 100ns >=20 > Vendor: Seagete Model:ST34520N Rev:1444 >=20 > Type:Direct Access ANSI SCSI revision:02 >=20 > SCSI0: (5:0) Synchronous at offest 8, period 248ns >=20 > Vendor: PIONEER Model:CD-ROM DR-104X Rev:0022 >=20 > Type:Direct CD-ROM ANSI SCSI revision:02 >=20 > =20 >=20 > Attached SCSI disk sda at scsi0, channel 0, id 3 lun 0 >=20 > SCSI device sda: 8888942 512-byte hdwr sectroe (4551 MB) >=20 > PARTITION CHECK >=20 > sda:unknown partition table > Expected, the install kernel does not know hp-ux disks. >=20 > Attached SCSI CD-ROM sr0 at scsi0, channel 0, id 5 lun 0 >=20 > sr0: scsi-1 drive >=20 > Uniform CD-ROM driver Revision:3.12 >=20 > =20 >=20 > RAMDISK: Compressed image found at block 0 >=20 > EXT2-FS warning: Checktime reached, running e2fsck is recommended >=20 Expected, side effect of how ram disks are built. > UFS:Mounted root (ext2 filesysstem) >=20 The following seem to be from an old kernel. Perhaps someone else on list can give more detail than myself. > NOT FREEING INITMEM (383K) >=20 > VFS:DISK CHANGE DETECTED in DRIVE sr(11,0) >=20 > SCSI0 (5:0) New error handler wants to abort command >=20 > 0x28 88 88 88 88 10 00 00 01 00 >=20 > SCSI0 (5:0) New error handler wants device to reset >=20 > 0x28 88 88 88 88 10 00 00 01 00 >=20 > SCSI0 (5:0) New error handler wants bus reset,cmd 13d14c00 >=20 > 0x28 88 88 88 88 10 00 00 01 00 >=20 > SCSI0(5:0) Synchronous at offset 8,period 248ms >=20 > SCSI0 (5:0) New error handler wants to abort command >=20 > 0x28 88 88 88 88 10 00 00 01 00 >=20 > SCSI:device set offline-not ready or command retry failed after bus reset >=20 > I/O error: dev 0d:00,sector 64 >=20 > isofs_read_super:dread failed, dev=3D0d:00, iso_blunum=3D16,block=3D16 >=20 > SCSI0 (3:0) New error handler wants to abort command >=20 > 0x28 88 88 88 88 10 00 00 08 00 >=20 > SCSI0 (3:0) New error handler wants device to reset >=20 > 0x28 88 88 88 88 10 00 00 08 00 >=20 > SCSI0 (3:0) New error handler wants bus reset,cmd 13d14c00 >=20 > 0x28 88 88 88 88 10 00 00 08 00 >=20 > SCSI: device setoffline-not ready or command retry failed >=20 > after bus reset:host 0 channel 0 id 3 lin 0 >=20 >=20 >=20 >=20 > --------------------------------- > Do You Yahoo!? > =EF=BE=81=EF=BF=BD=EF=BF=BD=EF=BF=BD=EF=BF=BD=EF=BE=9E=EF=BF=BD=EF=BF=BD= =EF=BF=BD =EF=BF=BD=EF=BF=BD=EF=BF=BD =EF=BF=BD=EF=BF=BD=EF=BF=BD=EF=BF=BD= =EF=BE=9C=EF=BF=BD =EF=BF=BD=EF=BF=BD=EF=BF=BD@yahoo.gr =EF=BF=BD=EF=BF=BD= =EF=BF=BD=EF=BF=BD=EF=BF=BD=EF=BF=BD=EF=BF=BD=EF=BF=BD=EF=BF=BD =EF=BF=BD= =EF=BF=BD=EF=BF=BD Yahoo! Mail. >=20 _______________________________________________ parisc-linux mailing list parisc-linux@lists.parisc-linux.org http://lists.parisc-linux.org/mailman/listinfo/parisc-linux