From mboxrd@z Thu Jan 1 00:00:00 1970 From: Guy Martin Subject: Re: [parisc-linux] Help wanted: Getting Matrox Mystique to run on HPPA B2000 Date: Tue, 5 Jul 2005 16:51:59 +0200 Message-ID: <20050705165159.0953c3ac.gmsoft@gentoo.org> References: <5.1.1.6.1.20050705220226.02abcec0@pop.singnet.com.sg> Mime-Version: 1.0 Content-Type: multipart/mixed; boundary="===============0084206296==" Cc: parisc-linux@lists.parisc-linux.org To: "J. L. Lee" Return-Path: In-Reply-To: <5.1.1.6.1.20050705220226.02abcec0@pop.singnet.com.sg> List-Id: parisc-linux developers list List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: parisc-linux-bounces@lists.parisc-linux.org --===============0084206296== Content-Type: multipart/signed; protocol="application/pgp-signature"; micalg="PGP-SHA1"; boundary="Signature=_Tue__5_Jul_2005_16_51_59_+0200_RLCkQChTb3KddQ5H" --Signature=_Tue__5_Jul_2005_16_51_59_+0200_RLCkQChTb3KddQ5H Content-Type: text/plain; charset=US-ASCII Content-Disposition: inline Content-Transfer-Encoding: quoted-printable Hi, What about=20 video=3Dmatroxfb:vesa:0x111,depth:16,mem:4,noaccel,init console=3Dtty0 passed to the kernel or something which best correspond to your vga card ? Mine is this : 0000:02:03.0 VGA compatible controller: Matrox Graphics, Inc. MGA 1064SG [M= ystique] (rev 02) and it works fine. Guy On Tue, 05 Jul 2005 22:47:16 +0800 "J. L. Lee" wrote: > Hi, >=20 > I have set up Matrox Millennum II on B2000 running Linux 2.6.12-rc6-pa1=20 > kernel. Am now trying to set up Matrox Mystique to run on it too. >=20 > In my first attempt I compiled the "Matrox acceleration" as MODULE with=20 > "Millennium I/II support" and "Mystique support" compiled into the KERNEL= =20 > (they are not "module" selectable). After rebooting, 'matroxfb' was not=20 > loaded automatically. Executed a command "modprobe matroxfb" it returned = an=20 > error msg "FATAL: Module matroxfb not found". >=20 > Recompiled the second time with "Matrox acceleration", "Millennium I/II=20 > support" and "Mystique support" all compiled into the KERNEL. Rebooted=20 > successfully but the Mystique card was not initialized nor the kernel=20 > crashes as it did running Linux 2.6.8. >=20 > The relevant boot msgs are as follows: (3 extra 'printk' s were added to= =20 > drivers/video/matrox/matroxfb_base.h before kernel recompilation so there= =20 > are extra outputs) >=20 >=20 > STI GSC/PCI core graphics driver Version 0.9a > STI PCI graphic ROM found at fd820000 (128 kB), fb at fb000000 (16 MB) > id 35acda16-9a02587, conforms to spec rev. 8.0c > graphics card name: HPA4982A > sticon: Initializing STI text console. > Console: switching to colour STI console 160x64 > matroxfb: Matrox Mystique (PCI) detected > mga_ioremap: phys=3D4253024256 size=3D16384 flags=3D1 virt=3D104f49e0=20 > virt->vaddr=3Dfd800000 > mga_ioremap: phys=3D4244635648 size=3D8388608 flags=3D1 virt=3D104f49cc=20 > virt->vaddr=3Dfd000000 > matroxfb: cannot determine memory size > mga_iounmap: before iounmap() va->vaddr=3Dfd000000 > mga_iounmap: after iounmap() va->vaddr=3Dfd000000 > mga_iounmap: before iounmap() va->vaddr=3Dfd800000 > mga_iounmap: after iounmap() va->vaddr=3Dfd800000 > matroxfb: probe of 0000:01:01.0 failed with error -1 > stifb: 'HPA4982A' (id: 0x35acda16) not supported. > Generic RTC Driver v1.07 >=20 >=20 > The 'lspci -v' outputs are as follows: >=20 > DebianHPPA01:~# lspci -v > 0000:00:0c.0 Ethernet controller: Digital Equipment Corporation DECchip=20 > 21142/43 (rev 41) > Subsystem: Hewlett-Packard Company: Unknown device 104f > Flags: bus master, medium devsel, latency 255, IRQ 66 > I/O ports at 0f00 [size=3D128] > Memory at f4005000 (32-bit, non-prefetchable) [size=3D1K] > Expansion ROM at f4040000 [disabled] [size=3D256K] >=20 > 0000:00:0d.0 Multimedia audio controller: Analog Devices AD1889 sound chip > Subsystem: Analog Devices AD1889 sound chip > Flags: bus master, medium devsel, latency 255, IRQ 67 > Memory at f4009000 (32-bit, prefetchable) [size=3D512] > Memory at f4008000 (32-bit, prefetchable) [size=3D16] > Memory at f4007000 (32-bit, prefetchable) [size=3D16] > Memory at f4006000 (32-bit, prefetchable) [size=3D16] > Capabilities: [dc] Power Management version 1 >=20 > 0000:00:0e.0 IDE interface: National Semiconductor Corporation 87415/8756= 0=20 > IDE (rev 03) (prog-if 8f [Master SecP SecO PriP PriO]) > Flags: bus master, medium devsel, latency 255, IRQ 7 > I/O ports at 0e00 [size=3D8] > I/O ports at 0d00 [size=3D4] > I/O ports at 0b00 [size=3D8] > I/O ports at 0a00 [size=3D4] > I/O ports at 0900 [size=3D16] >=20 > 0000:00:0e.1 Bridge: National Semiconductor Corporation 87560 Legacy I/O= =20 > (rev 01) > Flags: bus master, medium devsel, latency 255, IRQ 68 >=20 > 0000:00:0e.2 USB Controller: National Semiconductor Corporation USB=20 > Controller (rev 02) (prog-if 10 [OHCI]) > Flags: bus master, medium devsel, latency 240, IRQ 1 > Memory at f4004000 (32-bit, non-prefetchable) [size=3D4K] > Memory at f4003000 (32-bit, non-prefetchable) [size=3D4K] >=20 > 0000:00:0f.0 SCSI storage controller: LSI Logic / Symbios Logic 53c895a=20 > (rev 01) > Subsystem: LSI Logic / Symbios Logic LSI53C895A PCI to Ultra2 SCSI Contr= oller > Flags: bus master, medium devsel, latency 255, IRQ 69 > I/O ports at 0800 [size=3D256] > Memory at f4002000 (32-bit, non-prefetchable) [size=3D1K] > Memory at f4000000 (32-bit, non-prefetchable) [size=3D8K] > Capabilities: [40] Power Management version 2 >=20 > 0000:01:00.0 3D controller: Hewlett-Packard Company Visualize FXe (rev 03) > Subsystem: Hewlett-Packard Company: Unknown device 108c > Flags: bus master, 66MHz, medium devsel, latency 255, IRQ 70 > Memory at fb000000 (64-bit, prefetchable) [size=3D16M] > Memory at fa000000 (64-bit, non-prefetchable) [size=3D16M] > Expansion ROM at fd820000 [disabled] [size=3D128K] >=20 > 0000:01:01.0 VGA compatible controller: Matrox Graphics, Inc. MGA 1064SG= =20 > [Mystique] (rev 02) (prog-if 00 [VGA]) > Flags: bus master, stepping, medium devsel, latency 248, IRQ 71 > Memory at fd800000 (32-bit, non-prefetchable) [size=3D16K] > Memory at fd000000 (32-bit, prefetchable) [size=3D8M] > Memory at f4800000 (32-bit, non-prefetchable) [size=3D8M] > Expansion ROM at fd820000 [disabled] [size=3D64K] >=20 >=20 > The 'cat /proc/iomem' outputs are as follows: >=20 > DebianHPPA01:~# cat /proc/iomem > 00000000-0fffffff : System RAM > 00000000-000009ff : PDC data (Page Zero) > 00100000-0039cfff : Kernel code > 0039d000-0050d89b : Kernel data > f05d0000-f05d0000 : lcd_data > f05d0008-f05d0008 : lcd_cmd > f4000000-f47fffff : PCI00 LMMIO > f4000000-f4001fff : sym53c8xx > f4002000-f40023ff : sym53c8xx > f4004000-f4004fff : ohci_hcd > f4005000-f40053ff : tulip > f4009000-f40091ff : ad1889 > f4800000-f4ffffff : PCI01 LMMIO > fd000000-fdffffff : PCI01 ELMMIO > fed00000-fed00fff : SBA > fed30000-fed30fff : LBA > fed32000-fed32fff : LBA > fef00000-feffffff : Astro Intr Ack > fff80000-fffaffff : Central Bus > fffa0000-fffa0fff : CPU > fffb0000-fffdffff : Local Broadcast > fffe0000-ffffffff : Global Broadcast > DebianHPPA01:~# >=20 >=20 > Any suggestion what should I do next to see if Matrox Mytique cards are=20 > indeed usable on HPPA boxes. >=20 > Tks, > Lee >=20 >=20 >=20 > _______________________________________________ > parisc-linux mailing list > parisc-linux@lists.parisc-linux.org > http://lists.parisc-linux.org/mailman/listinfo/parisc-linux --=20 Guy Martin Gentoo Linux - HPPA port Lead / IPv6 team --Signature=_Tue__5_Jul_2005_16_51_59_+0200_RLCkQChTb3KddQ5H Content-Type: application/pgp-signature -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.1 (GNU/Linux) iD8DBQFCyp6RrpShrnoH4YYRAkRhAJsFCIbGPoLP53jE1ppEqwAccBTpUQCgqc40 si1W7UUnkeujhOtbOuE+n+4= =gSmN -----END PGP SIGNATURE----- --Signature=_Tue__5_Jul_2005_16_51_59_+0200_RLCkQChTb3KddQ5H-- --===============0084206296== Content-Type: text/plain; charset="us-ascii" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit Content-Disposition: inline _______________________________________________ parisc-linux mailing list parisc-linux@lists.parisc-linux.org http://lists.parisc-linux.org/mailman/listinfo/parisc-linux --===============0084206296==--