From mboxrd@z Thu Jan 1 00:00:00 1970 From: Grant Grundler Subject: [parisc-linux] Re: HPMC in ppa_init() Date: Thu, 25 May 2006 09:02:50 -0600 Message-ID: <20060525150250.GA6616@colo.lackof.org> References: <20060525121929.DWFD5348.web2@localhost.localdomain> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Cc: parisc-linux , kyjung@datatek.co.kr To: ?????? Return-Path: In-Reply-To: <20060525121929.DWFD5348.web2@localhost.localdomain> List-Id: parisc-linux developers list List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: parisc-linux-bounces@lists.parisc-linux.org 1) Please _always_ keep the parisc-linux mailing list copied on kernel bug reports. 2) Please send email in "text/plain" format. I ignored everything you wrote in HTML. 3) Comments that follow are based on the Console output that you included. (Thanks - that's what I really needed) > Backtrace: > [<10113644>] inb+0x60/0x7c > [<103a15ec>] ppa_init+0x144/0x258 > [<103a3138>] __ppa_attach+0x1c0/0x340 > [<102a5810>] parport_register_driver+0x84/0x124 > [<10568950>] do_initcalls+0x58/0xf8 > [<10103908>] init+0x44/0x158 > [<1010bc5c>] ret_from_kernel_thread+0x1c/0x24 You will have to disable SCSI_PPA driver from your config. It might be easiest to manually remove the driver from the initrd.img file and from the /lib/modules on the root disk. I looked at ppa_init() and it looks quite broken for hppa. The problem is stuff like this: static int ppa_byte_in(unsigned short base, char *buffer, int len) "base" needs to be u32 (unsigned int). parisc-linux needs more than 16 bits to represent an IO port address. This _could_ work if the parallel port were under PCI Bus 0 _and_ no other garbage is in the top 16 bits of the register. hth, grant On Thu, May 25, 2006 at 09:19:29PM +0900, ?????? wrote: >

Hi,

>

.

>

Sorry for late cause of my long travel.

>

I'm tring to upgrade a kernel to 2-6-15 using 2-6-= 8  on hppa machine.
There is more log information on the attated fi= le.

>

 

>

Package : kernel-image-2.6.15

>

Base kernel version : 2-6-8

>

Addressing : 32bit kernel

>

Problem : Boot error

>

Console message :

>

Kernel panic: not syncing : High priority machine check (HPMC)

>

 

>

Here is the information about HP server.
Machime: HP C200

>

CPU: PA8200 (PCX-U+)

>

Memory: 256MB

>

 

>

Could you please give me some tips to boot ?

>

.

>

Warm regards,

>

Son

>




 

>
---------[ ???? ???= ? ???? ]----------
???? : Re: kernel compile - HPMC error
?= ??? : 2006/04/27 22:21
?????? : Grant Grundler <grundler@p= arisc-linux.org>
?????? : ?????? <jyson@datatek.co.kr>
> >=20 > > > > 
Hi,
> I found this in my spam folder...can you please resend this
> as "Plain Text" (no HTML).
>=20
> Secondly, some guidance on how to report parisc-linux kernel bugs=20
> is available here:
> 	http://www.parisc-linux.org/faq/kernelbug-howto.html
>=20
> thanks,
> grant
>=20
> On Fri, Apr 14, 2006 at 10:30:12PM +0900, ?????? wrote:
> > <style> p {margin-top:0px;margin-bottom:0px;} </style>&l=
t;table border=3D0 width=3D100% bgcolor=3D'' cellpadding=3D0
> cellspacing=3D0 align=3Dcenter><tr><td valign=3Dtop style=3D'=
padding:8pt;'><font size=3D2><P> </P>
> > <P>Hi.</P>
> > <P>&nbsp;</P>
> > <P>I'm tring to make a kernel booting on hppa-debian linux.<=
;/P>
> > <P>I need a vmlinux and It has to be modified for me.</P>
> > <P>&nbsp;</P>
> > <P>finally, I gained&nbsp;a vmlinux but It didn't know any=
 hard disk.</P>
> > <P>I opened the /proc/partitions file, but there were nothing.=
</P>
> > <P>&nbsp;</P>
> > <P>somedays after, </P>
> > <P>I found my machine needs a GSCtoPCI/Dino PCI support option=
 in kernel configuration.</P>
> > <P>when It&nbsp;was booting the vmlinux knew two hard disk=
=2E yes, I have a two hard disk.</P>
> > <P>but during boot HPMC error accurred.</P>
> > <P>&nbsp;</P>
> > <P>I think they are some mismatch each other between H/W and S=
/W or S/W and S/W or their version. my cpu is PA8200
> (PCX-U+)</P>
> > <P>How I can check them???</P></font></td>&l=
t;/tr></table>
> >=20
>
> =00 >=20 >=20 > Firmware Version 5.1 >=20 > Duplex Console IO Dependent Code (IODC) revision 1 >=20 > -------------------------------------------------------------------------= ----- > =0D (c) Copyright 1995-1998, Hewlett-Packard Company, All rights reserv= ed > =0D----------------------------------------------------------------------= -------- >=20 > =0D Processor Speed State Coprocessor State I/D = Cache=20 > =0D --------- -------- --------------------- ----------------- ----= --------- > =0D 0 200 MHz Active Functional 512 = KB/1 MB >=20 > =0D Central Bus Speed (in MHz) : 120 >=20 > =0D Available memory (bytes) : 268435456 > =0D Good memory required (bytes): 0 (Not Set by OS) > =0D Primary boot path: FWSCSI.6.0 > =0D Alternate boot path: 0.0 > =0D Console path: 0.0 > =0D Keyboard path: PS2 > =0D > =0DCPU 0 > =0DWARNING: Memory configuration is not optimized for performance. Refer > to the System Installation or Memory Installation manuals for= =20 > memory configuration guidelines. > WARNING: Memory SIMMs are not installed in the proper sequence. Refer > to the System Installation or Memory Installation manuals for > memory configuration guidelines. >=20 >=20 > =0DSearching for device(s) with bootable media... > =0DThis may take several minutes. >=20 > =0DTo discontinue search, press any key (termination may not be immediate= ). >=20 >=20 > =0D Path Number Device Path Device Type and Utiliti= es > =0D ----------- ----------------- -----------------------= -- > =0D P0 FWSCSI.6.0 SEAGATE ST34572WS = =20 > =0D IPL > =0D P1 FWSCSI.5.0 SEAGATE ST19171W = =20 > =0D IPL >=20 >=20 > =0D > =0DEnter Path Number or Device Path to continue boot sequence. Enter NO = to go > =0Dto main menu. > =0D> sea > =0D > =0DERROR: Bad argument(s) > =0D > =0D > =0DEnter Path Number or Device Path to continue boot sequence. Enter NO = to go > =0Dto main menu. > =0D> no >=20 > =0D------- Main Menu ----------------------------------------------------= --------- >=20 > =0D Command Description > =0D ------- ----------- > =0D BOot [PRI|ALT|] Boot from specified path > =0D PAth [PRI|ALT|CON|KEY] [] Display or modify a path > =0D SEArch [DIsplay|IPL] [] Search for boot devices >=20 > =0D COnfiguration [] Access Configuration menu/comm= ands > =0D INformation [] Access Information menu/comman= ds > =0D SERvice [] Access Service menu/commands >=20 > =0D DIsplay Redisplay the current menu > =0D HElp [|] Display help for menu or comma= nd > =0D RESET Restart the system > =0D------- > =0DMain Menu: Enter command > sea >=20 > =0DSearching for potential boot device(s)... > =0DThis may take several minutes. >=20 > =0DTo discontinue search, press any key (termination may not be immediate= ). >=20 >=20 > =0D Path Number Device Path Device Type > =0D ----------- ----------------- ----------- > =0D P0 SESCSI.2.0 SONY CD-ROM CDU-76S = =20 > =0D P1 FWSCSI.6.0 SEAGATE ST34572WS = =20 > =0D P2 FWSCSI.5.0 SEAGATE ST19171W = =20 >=20 >=20 > =0DMain Menu: Enter command > bo p2 > =0DInteract with IPL (Y, N, Q)?> y > =0D > Booting...=20 > Boot IO Dependent Code (IODC) revision 1 >=20 >=20 > HARD Booted. > palo ipl 1.5 root@c3k Fri May 14 16:17:38 MDT 2004 > =0DSkipping extended partition 6 - beyond reach of IPL > =0D > =0DPartition Start(MB) End(MB) Id Type > =0D=0D1 1 31 f0 Palo > =0D=0D2 32 156 83 ext2 > =0D=0D5 157 5404 83 ext2 > =0D > =0DPALO(F0) partition contains: > =0D 0/vmlinux32 4973737 bytes @ 0x48000 >=20 > =0DInformation: No console specified on kernel command line. This is norm= al. > =0DPALO will choose the console currently used by firmware (serial).Curre= nt command line: > =0D2/vmlinux root=3D/dev/sda5 initrd=3D2/initrd.img HOME=3D/ console=3Dtt= yS0 TERM=3Dvt102 > =0D 0: 2/vmlinux > =0D 1: root=3D/dev/sda5 > =0D 2: initrd=3D2/initrd.img > =0D 3: HOME=3D/ > =0D 4: console=3DttyS0 > =0D 5: TERM=3Dvt102 >=20 > =0D<#> edit the numbered field > =0D'b' boot with this command line > =0D'r' restore command line > =0D'l' list dir > =0D? 0 > =0D2/vmlinux_0405_4 > =0DCurrent command line: > =0D2/vmlinux_0405_4 root=3D/dev/sda5 initrd=3D2/initrd.img HOME=3D/ conso= le=3DttyS0 TERM=3Dvt102 > =0D 0: 2/vmlinux_0405_4 > =0D 1: root=3D/dev/sda5 > =0D 2: initrd=3D2/initrd.img > =0D 3: HOME=3D/ > =0D 4: console=3DttyS0 > =0D 5: TERM=3Dvt102 >=20 > =0D<#> edit the numbered field > =0D'b' boot with this command line > =0D'r' restore command line > =0D'l' list dir > =0D? 0=08 =08b >=20 > =0DCommand line for kernel: 'root=3D/dev/sda5 HOME=3D/ console=3DttyS0 TE= RM=3Dvt102 palo_kernel=3D2/vmlinux_0405_4' > =0DSelected kernel: /vmlinux_0405_4 from partition 2 > =0DSelected ramdisk: /initrd.img from partition 2 > =0DELF32 executable > =0DEntry 00100000 first 00100000 n 2 > =0DSegment 0 load 00100000 size 3823404 mediaptr 0x1000 > =0DSegment 1 load 004a6000 size 1151110 mediaptr 0x3a7000 > =0DLoading ramdisk 4972544 bytes @ 0fb30000... > =0DBranching to kernel entry point 0x00100000. If this is the last > =0Dmessage you see, you may need to switch your console. This is > =0Da common symptom -- search the FAQ and mailing list at parisc-linux.org >=20 > =0DLinux version 2.6.15.4 (root@datatek) (gcc version 3.3.5 (Debian 1:3.3= =2E5-13)) #14 Sat Mar 6 12:46:17 KST 2027 > FP[0] enabled: Rev 0 Model 14 > The 32-bit Kernel has started... > Initialized PDC Console for debugging. > Determining PDC firmware type: System Map. > model 000059d0 00000481 00000000 00000002 77647a2b 100000f0 00000008 0000= 00b2 000000b2 > vers 00000501 > CPUID vers 14 rev 23 (0x000001d7) > capabilities 0x2 > model 9000/782/C200+ > Total Memory: 256 MB > initrd: 1fb30000-1ffee000 > initrd: reserving 0fb30000-0ffee000 (mem_max 10000000) > LED display at f0190001 registered > Built 1 zonelists > Kernel command line: root=3D/dev/sda5 HOME=3D/ console=3DttyS0 TERM=3Dvt1= 02 palo_kernel=3D2/vmlinux_0405_4 > PID hash table entries: 2048 (order: 11, 32768 bytes) > Console: colour dummy device 160x64 > Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) > Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) > Memory: 262144k available > Mount-cache hash table entries: 512 > checking if image is initramfs...it isn't (bad gzip magic numbers); looks= like an initrd > NET: Registered protocol family 16 > EISA bus registered > Searching for devices... > Found devices: > 1. U2-IOA BC Runway Port at 0xfff88000 [8] { 12, 0xf, 0x580, 0x0000b } > 2. Dino PCI Bridge at 0xf2000000 [8/0] { 13, 0x3, 0x680, 0x0000a }, addi= tional addresses: 0xf2800000=20 > 3. Raven U/L2 Dino RS-232 at 0xf2003000 [8/0/63] { 10, 0x0, 0x006, 0x0008= c } > 4. Raven+ w SE FWSCSI Core BA at 0xffd00000 [8/16] { 11, 0x0, 0x056, 0x00= 081 }, additional addresses: 0xffd0c000 0xffc00000=20 > 5. Raven+ w SE FWSCSI Core RS-232 at 0xffd05000 [8/16/4] { 10, 0x0, 0x056= , 0x0008c } > 6. Raven+ w SE FWSCSI Core SCSI at 0xffd06000 [8/16/5] { 10, 0x0, 0x056, = 0x00082 } > 7. Raven+ w SE FWSCSI Core Centronics at 0xffd02000 [8/16/0] { 10, 0x0, 0= x056, 0x00074 }, additional addresses: 0xffd01000 0xffd03000=20 > 8. Raven+ w SE FWSCSI Core Audio at 0xffd04000 [8/16/1] { 10, 0x4, 0x056,= 0x0007b } > 9. Raven+ w SE FWSCSI Core PS/2 Port at 0xffd08000 [8/16/7] { 10, 0x0, 0x= 056, 0x00084 } > 10. Raven+ w SE FWSCSI Core PS/2 Port at 0xffd08100 [8/16/8] { 10, 0x0, 0= x056, 0x00084 } > 11. U2-IOA BC GSC+ Port at 0xf203f000 [8/63] { 7, 0x1, 0x501, 0x0000c } > 12. Raven U/L2 Dino PS/2 Port at 0xf2001000 [8/1] { 10, 0x0, 0x006, 0x000= 96 } > 13. U2-IOA BC Runway Port at 0xfff8a000 [10] { 12, 0xf, 0x580, 0x0000b } > 14. Coral SGC Graphics at 0xf6000000 [10/12] { 10, 0x0, 0x004, 0x00077 } > 15. U2-IOA BC GSC+ Port at 0xf103f000 [10/63] { 7, 0x1, 0x501, 0x0000c } > 16. Cujo PCI Bridge at 0xf1000000 [10/0] { 13, 0x1, 0x682, 0x0000a } > 17. Dino RS-232 at 0xf1003000 [10/3] { 10, 0x0, 0x007, 0x0008c } > 18. Raven U 200 (9000/780/C200) at 0xfffa0000 [32] { 0, 0x0, 0x59d, 0x000= 04 } > 19. Memory at 0xfffb1000 [49] { 1, 0x0, 0x05d, 0x00009 } > CPU(s): 1 x PA8200 (PCX-U+) at 200.000000 MHz > Setting cache flush threshold to 2c0 (1 CPUs online) > Found U2 at 0xfff88000 > Found U2 at 0xfff8a000 > Lasi version 0 at 0xffd00000 found. > Dino version 3.1 found at 0xf2000000 > Cujo version 2.0 found at 0xf1000000 > Enabling Cujo 2.0 bug workaround > Cujo: No PCI devices enabled. > SCSI subsystem initialized > unwind_init: start =3D 0x104a7af0, end =3D 0x104d86f0, entries =3D 12480 > NTFS driver 2.1.25 [Flags: R/O]. > JFS: nTxBlock =3D 1946, nTxLock =3D 15569 > io scheduler noop registered > io scheduler deadline registered > PDC Stable Storage facility v0.09 > Soft power switch enabled, polling @ 0xf0140000. > STI GSC/PCI core graphics driver Version 0.9a > id 2d08c0a7-9a02587, conforms to spec rev. 8.07 > graphics card name: HPA4450AX1280 > sticon: Initializing STI text console. > Console: switching to colour STI console 160x64 > Console: switching to colour frame buffer device 160x64 > fb0: stifb 1280x1024-8 frame buffer device, HPA4450AX1280, id: 2d08c0a7, = mmio: 0xf6100000 > tipar: parallel link cable driver, version 1.19 > Generic RTC Driver v1.07 > ppdev: user-space parallel port driver > parkbd: no such parport > serio: GSC PS/2 keyboard port at 0xffd08000 irq 20 @ 8:16:7 > serio: GSC PS/2 mouse port at 0xffd08100 irq 20 @ 8:16:8 > HP SDC: No SDC found. > HP SDC MLC: Registering the System Domain Controller's HIL MLC. > HP SDC MLC: Request for raw HIL ISR hook denied > Serial: 8250/16550 driver $Revision: 1.90 $ 16 ports, IRQ sharing enabled > 8:16:4: ttyS0 at MMIO 0xffd05800 (irq =3D 16) is a 16550A > 8:0:63: ttyS1 at MMIO 0xf2003800 (irq =3D 21) is a 16550A > =0Dparport_init_chip: initialize bidirectional-mode. > =0Dparport0: PC-style at 0xffd02800, irq 18 [PCSPP,TRISTATE] > =0Dtipar0: using parport0 (interrupt-driven) > =0Dtipar0: link cable not found > =0DRAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize > =0Dloop: loaded (max 8 devices) > =0DCompaq SMART2 Driver (v 2.6.0) > =0DHP CISS Driver (v 2.6.8) > =0DUniform Multi-Platform E-IDE driver Revision: 7.00alpha2 > =0Dide: Assuming 33MHz system bus speed for PIO modes; override with ideb= us=3Dxx > =0DLoading Adaptec I2O RAID: Version 2.4 Build 5go > =0DDetecting Adaptec I2O RAID controllers... > =0DAdaptec aacraid driver (1.1-4 Mar 6 2027 12:26:05) > =0Dsym0: <875> rev 0x4 at pci 0000:00:13.0 irq 22 > =0Dsym0: No NVRAM, ID 7, Fast-20, SE, parity checking > =0Dsym0: SCSI BUS has been reset. > =0Dscsi0 : sym-2.2.1 > =0D Vendor: SEAGATE Model: ST19171W Rev: HP08 > =0D Type: Direct-Access ANSI SCSI revision: 02 > =0D target0:0:5: tagged command queuing enabled, command queue depth 16. > =0D target0:0:5: Beginning Domain Validation > =0D target0:0:5: asynchronous. > =0D target0:0:5: wide asynchronous. > =0D target0:0:5: FAST-20 WIDE SCSI 40.0 MB/s ST (50 ns, offset 15) > =0D target0:0:5: Domain Validation skipping write tests > =0D target0:0:5: Ending Domain Validation > =0D Vendor: SEAGATE Model: ST34572WS Rev: HP00 > =0D Type: Direct-Access ANSI SCSI revision: 02 > =0D target0:0:6: tagged command queuing enabled, command queue depth 16. > =0D target0:0:6: Beginning Domain Validation > =0D target0:0:6: asynchronous. > =0D target0:0:6: wide asynchronous. > =0D target0:0:6: FAST-20 WIDE SCSI 40.0 MB/s ST (50 ns, offset 15) > =0D target0:0:6: Domain Validation skipping write tests > =0D target0:0:6: Ending Domain Validation > =0Dmegaraid cmm: 2.20.2.6 (Release Date: Mon Mar 7 00:01:03 EST 2005) > =0Dmegaraid: 2.20.4.6 (Release Date: Mon Mar 07 12:27:22 EST 2005) > =0Dmegasas: 00.00.02.00-rc4 Fri Sep 16 12:37:08 EDT 2005 > =0D3ware Storage Controller device driver for Linux v1.26.02.001. > =0D3ware 9000 Storage Controller device driver for Linux v2.26.02.004. > =0Dppa: Version 2.07 (for Linux 2.4.x) > =0D >=20 > Backtrace: > =0D [<10113644>] inb+0x60/0x7c > =0D [<103a15ec>] ppa_init+0x144/0x258 > =0D [<103a3138>] __ppa_attach+0x1c0/0x340 > =0D [<102a5810>] parport_register_driver+0x84/0x124 > =0D [<10568950>] do_initcalls+0x58/0xf8 > =0D [<10103908>] init+0x44/0x158 > =0D [<1010bc5c>] ret_from_kernel_thread+0x1c/0x24 >=20 >=20 > =0DHigh Priority Machine Check (HPMC): Code=3D1 regs=3D104e3080 (Addr=3D0= 0000000) >=20 > =0D YZrvWESTHLNXBCVMcbcbcbcbOGFRQPDI > =0DPSW: 00000000000001000000000000001100 Not tainted > =0Dr00-03 00000000 105ce010 10113644 1f2df840 > =0Dr04-07 00002801 00000002 00002802 00000008 > =0Dr08-11 00002800 ffffffff 105ce8c8 104f0ad8 > =0Dr12-15 3b9aca00 105ce810 104f1010 f0100000 > =0Dr16-19 f000167c f00001f8 f00001f0 f200006d > =0Dr20-23 0000000e 0000000f 10258c38 00000000 > =0Dr24-27 0000000e 00000001 1f5d2c00 104d9010 > =0Dr28-31 00000020 000000c8 1fb042c0 10113644 > =0Dsr0-3 00000000 00000000 00000000 00000000 > =0Dsr4-7 00000000 00000000 00000000 00000000 >=20 > =0D VZOUICununcqcqcqcqcqcrmunTDVZOUI > =0DFPSR: 00000100000011100000000000000000 > =0DFPER1: 24850e03 > =0Dfr00-03 0000000000000000 0000000000000000 0000000000000000 0000000000= 000000 > =0Dfr04-07 0000000000000000 0000000000000000 0000000000000000 0000000000= 000000 > =0Dfr08-11 0000000000000000 0000000000000000 0000000000000000 0000000000= 000000 > =0Dfr12-15 0000000000000000 0000000000000000 0000000000000000 0000000000= 000000 > =0Dfr16-19 0000000000000000 0000000000000000 0000000000000000 0000000000= 000000 > =0Dfr20-23 0000000000000000 0000000000000000 0000000000000000 0000000000= 000000 > =0Dfr24-27 0000000000000000 0000000000000000 0000000000000000 0000000000= 000000 > =0Dfr28 _______________________________________________ parisc-linux mailing list parisc-linux@lists.parisc-linux.org http://lists.parisc-linux.org/mailman/listinfo/parisc-linux