From: akpm@linux-foundation.org
To: kyle@mcmartin.ca
Cc: matthew@wil.cx, grundler@parisc-linux.org,
linux-parisc@vger.kernel.org, akpm@linux-foundation.org,
bunk@kernel.org
Subject: [patch 2/2] drivers/parisc/: make code static
Date: Wed, 29 Oct 2008 14:23:33 -0700 [thread overview]
Message-ID: <200810292123.m9TLNYWe020679@imap1.linux-foundation.org> (raw)
From: Adrian Bunk <bunk@kernel.org>
Make the following needlessly global code static:
- asp.c: asp_init_chip()
- ccio-dma.c: ccio_io_pdir_entry()
- dino.c: struct dino_port_ops
- dino.c: struct dino_bios_ops
- hppb.c: struct hppb_card_head
- lasi.c: lasi_led_init()
- lasi.c: lasi_init_chip()
- lba_pci.c: struct lba_bios_ops
- sba_iommu.c: sba_io_pdir_entry()
- sba_iommu.c: sba_driver_callback()
- sba_iommu.c: sba_driver_callback()
- wax.c: wax_init_chip()
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Matthew Wilcox <matthew@wil.cx>
Cc: Grant Grundler <grundler@parisc-linux.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---
drivers/parisc/asp.c | 3 +--
drivers/parisc/ccio-dma.c | 2 +-
drivers/parisc/dino.c | 4 ++--
drivers/parisc/hppb.c | 2 +-
drivers/parisc/lasi.c | 5 ++---
drivers/parisc/lba_pci.c | 2 +-
drivers/parisc/sba_iommu.c | 7 +++----
drivers/parisc/wax.c | 3 +--
8 files changed, 12 insertions(+), 16 deletions(-)
diff -puN drivers/parisc/asp.c~drivers-parisc-make-code-static drivers/parisc/asp.c
--- a/drivers/parisc/asp.c~drivers-parisc-make-code-static
+++ a/drivers/parisc/asp.c
@@ -71,8 +71,7 @@ static void asp_choose_irq(struct parisc
*/
#define ASP_INTERRUPT_ADDR 0xf0800000
-int __init
-asp_init_chip(struct parisc_device *dev)
+static int __init asp_init_chip(struct parisc_device *dev)
{
struct gsc_irq gsc_irq;
int ret;
diff -puN drivers/parisc/ccio-dma.c~drivers-parisc-make-code-static drivers/parisc/ccio-dma.c
--- a/drivers/parisc/ccio-dma.c~drivers-parisc-make-code-static
+++ a/drivers/parisc/ccio-dma.c
@@ -555,7 +555,7 @@ static u32 hint_lookup[] = {
* (Load Coherence Index) instruction. The 8 bits used for the virtual
* index are bits 12:19 of the value returned by LCI.
*/
-void CCIO_INLINE
+static void CCIO_INLINE
ccio_io_pdir_entry(u64 *pdir_ptr, space_t sid, unsigned long vba,
unsigned long hints)
{
diff -puN drivers/parisc/dino.c~drivers-parisc-make-code-static drivers/parisc/dino.c
--- a/drivers/parisc/dino.c~drivers-parisc-make-code-static
+++ a/drivers/parisc/dino.c
@@ -287,7 +287,7 @@ DINO_PORT_OUT(b, 8, 3)
DINO_PORT_OUT(w, 16, 2)
DINO_PORT_OUT(l, 32, 0)
-struct pci_port_ops dino_port_ops = {
+static struct pci_port_ops dino_port_ops = {
.inb = dino_in8,
.inw = dino_in16,
.inl = dino_in32,
@@ -690,7 +690,7 @@ dino_fixup_bus(struct pci_bus *bus)
}
-struct pci_bios_ops dino_bios_ops = {
+static struct pci_bios_ops dino_bios_ops = {
.init = dino_bios_init,
.fixup_bus = dino_fixup_bus
};
diff -puN drivers/parisc/hppb.c~drivers-parisc-make-code-static drivers/parisc/hppb.c
--- a/drivers/parisc/hppb.c~drivers-parisc-make-code-static
+++ a/drivers/parisc/hppb.c
@@ -29,7 +29,7 @@ struct hppb_card {
struct hppb_card *next;
};
-struct hppb_card hppb_card_head = {
+static struct hppb_card hppb_card_head = {
.hpa = 0,
.next = NULL,
};
diff -puN drivers/parisc/lasi.c~drivers-parisc-make-code-static drivers/parisc/lasi.c
--- a/drivers/parisc/lasi.c~drivers-parisc-make-code-static
+++ a/drivers/parisc/lasi.c
@@ -107,7 +107,7 @@ lasi_init_irq(struct gsc_asic *this_lasi
#else
-void __init lasi_led_init(unsigned long lasi_hpa)
+static void __init lasi_led_init(unsigned long lasi_hpa)
{
unsigned long datareg;
@@ -163,8 +163,7 @@ static void lasi_power_off(void)
gsc_writel(0x02, datareg);
}
-int __init
-lasi_init_chip(struct parisc_device *dev)
+static int __init lasi_init_chip(struct parisc_device *dev)
{
extern void (*chassis_power_off)(void);
struct gsc_asic *lasi;
diff -puN drivers/parisc/lba_pci.c~drivers-parisc-make-code-static drivers/parisc/lba_pci.c
--- a/drivers/parisc/lba_pci.c~drivers-parisc-make-code-static
+++ a/drivers/parisc/lba_pci.c
@@ -824,7 +824,7 @@ lba_fixup_bus(struct pci_bus *bus)
}
-struct pci_bios_ops lba_bios_ops = {
+static struct pci_bios_ops lba_bios_ops = {
.init = lba_bios_init,
.fixup_bus = lba_fixup_bus,
};
diff -puN drivers/parisc/sba_iommu.c~drivers-parisc-make-code-static drivers/parisc/sba_iommu.c
--- a/drivers/parisc/sba_iommu.c~drivers-parisc-make-code-static
+++ a/drivers/parisc/sba_iommu.c
@@ -561,7 +561,7 @@ typedef unsigned long space_t;
* IOMMU uses little endian for the pdir.
*/
-void SBA_INLINE
+static void SBA_INLINE
sba_io_pdir_entry(u64 *pdir_ptr, space_t sid, unsigned long vba,
unsigned long hint)
{
@@ -1874,7 +1874,7 @@ static struct parisc_device_id sba_tbl[]
{ 0, }
};
-int sba_driver_callback(struct parisc_device *);
+static int sba_driver_callback(struct parisc_device *);
static struct parisc_driver sba_driver = {
.name = MODULE_NAME,
@@ -1887,8 +1887,7 @@ static struct parisc_driver sba_driver =
** If so, initialize the chip and tell other partners in crime they
** have work to do.
*/
-int
-sba_driver_callback(struct parisc_device *dev)
+static int sba_driver_callback(struct parisc_device *dev)
{
struct sba_device *sba_dev;
u32 func_class;
diff -puN drivers/parisc/wax.c~drivers-parisc-make-code-static drivers/parisc/wax.c
--- a/drivers/parisc/wax.c~drivers-parisc-make-code-static
+++ a/drivers/parisc/wax.c
@@ -68,8 +68,7 @@ wax_init_irq(struct gsc_asic *wax)
// gsc_writel(0xFFFFFFFF, base+0x2000); /* RS232-B on Wax */
}
-int __init
-wax_init_chip(struct parisc_device *dev)
+static int __init wax_init_chip(struct parisc_device *dev)
{
struct gsc_asic *wax;
struct parisc_device *parent;
_
reply other threads:[~2008-10-29 21:23 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200810292123.m9TLNYWe020679@imap1.linux-foundation.org \
--to=akpm@linux-foundation.org \
--cc=bunk@kernel.org \
--cc=grundler@parisc-linux.org \
--cc=kyle@mcmartin.ca \
--cc=linux-parisc@vger.kernel.org \
--cc=matthew@wil.cx \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox