From: Rolf Eike Beer <eike-kernel@sf-tec.de>
To: "linux-parisc" <linux-parisc@vger.kernel.org>
Subject: Boot failure with 3.0.3: swapper (pid 0): Protection id trap (code 7)
Date: Fri, 19 Aug 2011 19:58:30 +0200 [thread overview]
Message-ID: <201108191958.35802.eike-kernel@sf-tec.de> (raw)
[-- Attachment #1: Type: Text/Plain, Size: 15195 bytes --]
The last kernel I used on this machine was 2.6.38.4. Any hints appreciated.
Greetings,
Eike
Command line for kernel: 'root=/dev/sda3 console=ttyS0
palo_kernel=2/kernel-3.0.3'
Selected kernel: /kernel-3.0.3 from partition 2
ELF32 executable
Entry 00100100 first 00100000 n 3
Segment 0 load 00100000 size 4820992 mediaptr 0x1000
Segment 1 load 005c8000 size 116752 mediaptr 0x49a000
Segment 2 load 005e5000 size 27888 mediaptr 0x4b7000
Branching to kernel entry point 0x00100100. If this is the last
message you see, you may need to switch your console. This is
a common symptom -- search the FAQ and mailing list at parisc-linux.org
Linux version 3.0.3 (root@voyager) (gcc version 4.5.3 (Gentoo 4.5.3-r1 p1.0,
pie-0.4.5) ) #1 Fri Aug 19 14:48:59 CEST 2011
unwind_init: start = 0x10503000, end = 0x1053a640, entries = 14180
WARNING: Out of order unwind entry! 105041f0 and 10504200
WARNING: Out of order unwind entry! 10504200 and 10504210
WARNING: Out of order unwind entry! 10504cf0 and 10504d00
WARNING: Out of order unwind entry! 10504d00 and 10504d10
FP[0] enabled: Rev 1 Model 16
The 32-bit Kernel has started...
bootconsole [ttyB0] enabled
Initialized PDC Console for debugging.
Determining PDC firmware type: System Map.
model 00005cf0 00000481 00000000 00000002 77486b80 100000f0 00000008 000000b2
000000b2
vers 00000301
CPUID vers 17 rev 11 (0x0000022b)
capabilities 0x3
model 9000/785/C3600
Total Memory: 512 MB
_______________________________
< Your System ate a SPARC! Gah! >
-------------------------------
\ ^__^
(__)\ )\/\
U ||----w |
|| ||
swapper (pid 0): Protection id trap (code 7)
YZrvWESTHLNXBCVMcbcbcbcbOGFRQPDI
PSW: 00000000000001000000000000001110 Not tainted
r00-03 0004000e 0004000e 105caed8 00000000
r04-07 10544014 10544000 105401cc 1054daf4
r08-11 1054db10 10544020 10576800 000005ec
r12-15 00100000 00020000 10544000 10576af8
r16-19 00020000 105b7000 005ebfff 0000000e
r20-23 00000000 00000000 00000000 00000000
r24-27 00000001 00000000 00000000 10544000
r28-31 00000000 00000000 10540280 00000000
sr00-03 00000000 00000000 00000000 00000000
sr04-07 00000000 00000000 00000000 00000000
IASQ: 00000000 00000000 IAOQ: 1010047c 10100480
IIR: 43ffff40 ISR: 00000000 IOR: 00000000
CPU: 0 CR30: 10540000 CR31: ffffffff
ORIG_R28: 00000000
IAOQ[0]: .L21+0x0/0x8
IAOQ[1]: .L21+0x4/0x8
RP(r2): paging_init+0x7ac/0x848
Backtrace:
[<105caed8>] paging_init+0x7ac/0x848
[<105cb474>] setup_arch+0x5c/0x80
[<105c86ac>] start_kernel+0x80/0x374
[<1011497c>] start_parisc+0x4c/0x68
Backtrace:
[<10115050>] die_if_kernel+0xac/0x1bc
[<1011587c>] handle_interruption+0x47c/0x718
[<10104078>] intr_check_sig+0x0/0x34
[<10100480>] .L21+0x4/0x8
---[ end trace 139ce121c98e96c9 ]---
Kernel panic - not syncing: Attempted to kill the idle task!
Backtrace:
[<1010fdec>] panic+0x90/0x23c
[<10135b28>] do_exit+0x5cc/0x640
[<1011508c>] die_if_kernel+0xe8/0x1bc
[<1011587c>] handle_interruption+0x47c/0x718
[<10104078>] intr_check_sig+0x0/0x34
[<10100480>] .L21+0x4/0x8
_______________________________
< Your System ate a SPARC! Gah! >
-------------------------------
\ ^__^
(__)\ )\/\
U ||----w |
|| ||
swapper (pid 0): Protection id trap (code 7)
die_if_kernel() recursion detected.
[-- Attachment #2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 198 bytes --]
next reply other threads:[~2011-08-19 17:58 UTC|newest] Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top 2011-08-19 17:58 Rolf Eike Beer [this message] 2011-08-31 9:54 ` Boot failure with 3.0.3: swapper (pid 0): Protection id trap (code 7) Rolf Eike Beer 2011-08-31 15:48 ` Kyle McMartin 2011-08-31 16:04 ` Kyle McMartin 2011-09-01 19:13 ` Rolf Eike Beer 2011-09-02 10:30 ` Rolf Eike Beer 2011-09-06 7:40 ` Rolf Eike Beer 2011-09-06 13:46 ` Kyle McMartin 2011-09-06 14:00 ` Kyle McMartin 2011-09-06 14:15 ` James Bottomley 2011-09-06 14:20 ` Kyle McMartin 2011-09-06 15:06 ` Rolf Eike Beer 2011-09-07 8:00 ` Rolf Eike Beer 2011-10-12 7:26 ` Rolf Eike Beer 2011-10-12 13:41 ` James Bottomley 2011-10-18 15:51 ` James Bottomley 2011-10-26 13:02 ` Rolf Eike Beer 2011-10-28 15:11 ` Jeroen Roovers 2011-09-06 14:41 ` John David Anglin 2011-09-06 15:06 ` Rolf Eike Beer 2011-09-04 1:46 ` John David Anglin 2011-09-04 16:35 ` Rolf Eike Beer 2011-09-04 17:59 ` John David Anglin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201108191958.35802.eike-kernel@sf-tec.de \
--to=eike-kernel@sf-tec.de \
--cc=linux-parisc@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox