Re: Short notice: ipmi_si kills C8000

Thomas Bogendoerfer
2013-10-29T16:41:51Z

On Tue, Oct 29, 2013 at 11:41:08AM +0100, Rolf Eike Beer wrote:
> Oops, sorry, I misread the git log. I've now applied that patch to

no problem, maybe it's worth to send the fix to stable now it's
in 3.12

> 3.11.6 and the module loads fine. Am I supposed to see anything in
> the sysfs that I can query now?

I've played only with ipmitool, which gives something like

c8000:~# ipmitool sdr
Systemboard | 30 degrees C | ok
CPU 1 | 43 degrees C | ok
Ambient | 24.50 degrees C | ok
Main +12V | 12.25 Volts | ok
Main -12V | -12.45 Volts | ok
Main +5V | 5.00 Volts | ok
Main 3.3V | 3.35 Volts | ok
Battery +3V | 3.11 Volts | ok
Stdby +3.3V | 3.40 Volts | ok
Main +1.5V | 1.49 Volts | ok
VTT | 1.19 Volts | ok
Main +1.8V | 1.80 Volts | ok
FAN1 SYS | 6360 RPM | ok
FAN2 SYS | 6240 RPM | ok
FAN3 SYS | 6000 RPM | ok
FAN4 SYS | 6240 RPM | ok
FAN5 SYS | 5880 RPM | ok
FAN1 PSU | 2400 RPM | ok
FAN2 PSU | 2400 RPM | ok
SEL Level | 0 unspecified | ok
CPU 1 | 0x80 | ok
PSU | Not Readable | ns
PS1 | 0x02 | ok
FAN1 SYS | 0x01 | ok
FAN2 SYS | 0x01 | ok
FAN3 SYS | 0x01 | ok
FAN4 SYS | 0x01 | ok
FAN5 SYS | 0x01 | ok
FAN1 PSU | 0x01 | ok
FAN2 PSU | 0x01 | ok
Watchdog | 0x00 | ok
iRMC request | 0x00 | ok
System Mgmt SW | Not Readable | ns
local Mon. | 0x02 | ok
Pwr Btn override | 0x01 | ok
Software NMI | 0x00 | ok
System BIOS | Not Readable | ns
iRMC | Not Readable | ns

Thomas.

--
Crap can work. Given enough thrust pigs will fly, but it's not necessarily a
good idea. [ RFC1925, 2.3 ]