From mboxrd@z Thu Jan 1 00:00:00 1970 Received: from mailserv2.iuinc.com (IDENT:qmailr@mailserv2.iuinc.com [206.245.164.55]) by puffin.external.hp.com (8.9.3/8.9.3) with SMTP id NAA18120 for ; Mon, 11 Sep 2000 13:03:12 -0600 Sender: rbrad@mailserv2.iuinc.com Message-ID: <39BCF7FE.E6E0EA3@uswest.net> Date: Mon, 11 Sep 2000 09:19:26 -0600 From: Ryan Bradetich MIME-Version: 1.0 To: rstickel@mindspring.com CC: parisc-linux@thepuffingroup.com Subject: [Fwd: [parisc-linux] Bug report] Content-Type: multipart/mixed; boundary="------------EF58A87E4F8EE11A82334529" List-ID: This is a multi-part message in MIME format. --------------EF58A87E4F8EE11A82334529 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Hmm... I sent this message out last friday, but I haven't seen it show up in my email box. So.... here goes again :) - Ryan Ryan Bradetich wrote: > Robert, > > I have problems booting the 735/755 when the kernel is built with > lasi/asp option enabled (it is enabled in the default config). If I diable > this option, I can boot the 735/755 to a root prompt. > > I do not know if the kernel on the CD was built with this option, but > you could build a newer kernel with this option diabled and try it > for the 710. > > Hope this helps, > > -Ryan > > P.S. This is on my TODO list to fix after I work on the U2/UTurn > code. If someone else is interested in taking a look at it, let me know > and I'll pass on the little bit of information I have about this problem. > > Robert Stickel wrote: > > > Hello, > > > > The good news: We are really excited about the Puffin project. > > > > The bad news: We tried to boot an Apollo 9000/710 on your PA/Linux > > Developer's > > Release CD, Version 0.1 - Snapshot 2000/08/04 and never quite got to a > > root > > prompt (see transcript below). Should this be possible or are we > > missing > > something? > > > > Thanks for any advice, > > > > rstickel@mindspring.com > > sts@minitower.gtri.gatech.edu > > > > Transcript of attempt to boot Apollo 9000/710 on Puffin CD. At the > > request_irq(259, c01ec76c, 0x0, asp, c3fcd080) > > line the systems hangs. > > > > (c) Copyright. Hewlett-Packard Company. 1991. > > All rights reserved. > > > > PDC ROM rev. 2.0 > > IODC ROM rev. 2.0 > > 64 MB of memory configured and tested. > > > > Selecting a system to boot. > > To stop selection process, press and hold the ESCAPE key. > > > > Selection process stopped. > > > > Searching for Potential Boot Devices. > > To terminate search, press and hold the ESCAPE key. > > > > Device Selection Device Path Device Type > > ---------------------------------------------------------------------------- > > > > P0 scsi.6.0 MATSHITACD-ROM CR-8005A > > P1 scsi.5.0 IOMEGA ZIP 100 > > P2 scsi.4.0 iomega jaz 1GB > > P3 scsi.3.0 SEAGATE ST11200N SUN1.05 > > P4 scsi.2.0 SEAGATE ST31230N > > P5 scsi.1.0 IBM 0662 > > > > b) Boot from specified device > > s) Search for bootable devices > > a) Enter Boot Administration mode > > x) Exit and continue boot sequence > > ?) Help > > > > Select from menu: a > > BOOT_ADMIN> info > > ----------------------------- Hardware Configuration > > ------------------------ > > > > Machine model: 9000/710 > > > > Processor Frequency = 50000000 Hz > > I/O Subsystem Frequency = 25000000 Hz > > > > LAN Jumper Status: Internal ThinLAN Port selected > > > > Processor Revision = 3 > > System Controller Revision = 0 > > Floating Point Coprocessor Revision = 3 > > > > Hardware Version 12288 (0x00003000) > > Software Version 1153 (0x00000481) > > > > BOOT_ADMIN> boot alt > > > > Trying scsi.6.0 > > Boot path initialized. > > Attempting to load IPL. > > > > Hard booted. > > palo ipl bame@noam Fri Aug 4 18:36:35 MDT 2000 > > 0/vmlinux 2349352 bytes @ 0x6e8800 > > 0/palo-cmdline '0/vmlinux TERM=linux HOME=/ root=/dev/scd0' > > Kernel: partition 0 file /vmlinux > > ELF32 executable > > > > Entry 00100000 first 00100000 n 4 > > Segment 0 load 00100000 size 1511580 mediaptr 0x1000 > > Segment 1 load 00272000 size 132368 mediaptr 0x173000 > > Segment 2 load 00294000 size 86880 mediaptr 0x194000 > > Segment 3 load 002ac000 size 8192 mediaptr 0x1aa000 > > branching to kernel entry point 0x00100000 > > pdc_cons registered ! > > The Kernel has started... > > Free memory starts at: 0xc02dc000 > > PALO command line: 'TERM=linux HOME=/ root=/dev/scd0' > > PALO initrd 0-0 > > FP CCR was 0x0, will be set to 0xc0 > > model 00003000 00000481 00000000 00000000 78243572 00000000 00000004 > > 0000000d 00000000 > > vers 00000003 > > CPUID vers 0 rev 0 > > CPU(s): 1 x PA7000 at 50.000000 MHz > > Searching for devices in PDC firmware... an older box... > > Found devices: > > 1. Stinger Optional Graphics (10) at 0xf4000000, versions 0x6, 0x0, > > 0x77, 0x0, 0x0 > > 2. Bushmaster Core BA (11) at 0xf082f000, versions 0x6, 0x0, 0x70, 0x0, > > 0x0 > > 3. Bushmaster Core SCSI (10) at 0xf0825000, versions 0x6, 0x0, 0x71, > > 0x0, 0x0 > > 4. Bushmaster Core LAN (802.3) (10) at 0xf0826000, versions 0x6, 0x0, > > 0x72, 0x0, 0x0 > > 5. Bushmaster Core HIL (10) at 0xf0821000, versions 0x6, 0x0, 0x73, 0x0, > > 0x0 > > 6. Bushmaster Core RS-232 (10) at 0xf0823000, versions 0x6, 0x0, 0x75, > > 0x0, 0x0 > > 7. Bushmaster Core RS-232 (10) at 0xf0822000, versions 0x6, 0x0, 0x75, > > 0x0, 0x0 > > 8. Bushmaster Core Centronics (10) at 0xf0824000, versions 0x6, 0x0, > > 0x74, 0x0, 0x0 > > 9. Bushmaster Audio (10) at 0xf1000000, versions 0x6, 0x0, 0x7a, 0x0, > > 0x0 > > 10. Bushmaster (710) (0) at 0xfffbe000, versions 0x300, 0x0, 0x4, 0x0, > > 0x81 > > 11. Bushmaster (1) at 0xfffbf000, versions 0x16, 0x0, 0x9, 0x0, 0x0 > > That's a total of 11 devices. > > Linux version 2.3.99-pre8 (bame@noam) (gcc version 2.96 20000707 > > (experimental)) #24 Fri Aug 4 18:27:58 MDT 2000 > > initrd: 00000000-00000000 > > pagetable_init > > On node 0 totalpages: 16384 > > zone(0): 8192 pages. > > zone(1): 8192 pages. > > zone(2): 0 pages. > > trap_init > > Calibrating delay loop... 46.08 BogoMIPS > > Memory: 61380k available > > Dentry-cache hash table entries: 8192 (order: 4, 65536 bytes) > > Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes) > > Page-cache hash table entries: 16384 (order: 4, 65536 bytes) > > kmem_create: Poisoning requested, but con given - bdev_cache > > Inode-cache hash table entries: 4096 (order: 3, 32768 bytes) > > kmem_create: Poisoning requested, but con given - inode_cache > > POSIX conformance testing by UNIFIX > > ASP version 1 at 0xf0800000 found. > > request_irq(259, c01ec76c, 0x0, asp, c3fcd080) > > > > --------------------------------------------------------------------------- > > To unsubscribe: send e-mail to parisc-linux-request@thepuffingroup.com with > > `unsubscribe' as the subject. --------------EF58A87E4F8EE11A82334529 Content-Type: message/rfc822 Content-Transfer-Encoding: 7bit Content-Disposition: inline X-Mozilla-Status2: 00000000 Message-ID: <39B99ABE.A1E2597F@uswest.net> Date: Fri, 08 Sep 2000 20:04:47 -0600 From: Ryan Bradetich X-Mailer: Mozilla 4.73 [en] (X11; U; Linux 2.4.0-test2 i686) X-Accept-Language: en MIME-Version: 1.0 To: Robert Stickel CC: parisc-linux@thepuffingroup.com Subject: Re: [parisc-linux] Bug report References: <39B935EE.EEEC23BE@mindspring.com> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Robert, I have problems booting the 735/755 when the kernel is built with lasi/asp option enabled (it is enabled in the default config). If I diable this option, I can boot the 735/755 to a root prompt. I do not know if the kernel on the CD was built with this option, but you could build a newer kernel with this option diabled and try it for the 710. Hope this helps, -Ryan P.S. This is on my TODO list to fix after I work on the U2/UTurn code. If someone else is interested in taking a look at it, let me know and I'll pass on the little bit of information I have about this problem. Robert Stickel wrote: > Hello, > > The good news: We are really excited about the Puffin project. > > The bad news: We tried to boot an Apollo 9000/710 on your PA/Linux > Developer's > Release CD, Version 0.1 - Snapshot 2000/08/04 and never quite got to a > root > prompt (see transcript below). Should this be possible or are we > missing > something? > > Thanks for any advice, > > rstickel@mindspring.com > sts@minitower.gtri.gatech.edu > > Transcript of attempt to boot Apollo 9000/710 on Puffin CD. At the > request_irq(259, c01ec76c, 0x0, asp, c3fcd080) > line the systems hangs. > > (c) Copyright. Hewlett-Packard Company. 1991. > All rights reserved. > > PDC ROM rev. 2.0 > IODC ROM rev. 2.0 > 64 MB of memory configured and tested. > > Selecting a system to boot. > To stop selection process, press and hold the ESCAPE key. > > Selection process stopped. > > Searching for Potential Boot Devices. > To terminate search, press and hold the ESCAPE key. > > Device Selection Device Path Device Type > ---------------------------------------------------------------------------- > > P0 scsi.6.0 MATSHITACD-ROM CR-8005A > P1 scsi.5.0 IOMEGA ZIP 100 > P2 scsi.4.0 iomega jaz 1GB > P3 scsi.3.0 SEAGATE ST11200N SUN1.05 > P4 scsi.2.0 SEAGATE ST31230N > P5 scsi.1.0 IBM 0662 > > b) Boot from specified device > s) Search for bootable devices > a) Enter Boot Administration mode > x) Exit and continue boot sequence > ?) Help > > Select from menu: a > BOOT_ADMIN> info > ----------------------------- Hardware Configuration > ------------------------ > > Machine model: 9000/710 > > Processor Frequency = 50000000 Hz > I/O Subsystem Frequency = 25000000 Hz > > LAN Jumper Status: Internal ThinLAN Port selected > > Processor Revision = 3 > System Controller Revision = 0 > Floating Point Coprocessor Revision = 3 > > Hardware Version 12288 (0x00003000) > Software Version 1153 (0x00000481) > > BOOT_ADMIN> boot alt > > Trying scsi.6.0 > Boot path initialized. > Attempting to load IPL. > > Hard booted. > palo ipl bame@noam Fri Aug 4 18:36:35 MDT 2000 > 0/vmlinux 2349352 bytes @ 0x6e8800 > 0/palo-cmdline '0/vmlinux TERM=linux HOME=/ root=/dev/scd0' > Kernel: partition 0 file /vmlinux > ELF32 executable > > Entry 00100000 first 00100000 n 4 > Segment 0 load 00100000 size 1511580 mediaptr 0x1000 > Segment 1 load 00272000 size 132368 mediaptr 0x173000 > Segment 2 load 00294000 size 86880 mediaptr 0x194000 > Segment 3 load 002ac000 size 8192 mediaptr 0x1aa000 > branching to kernel entry point 0x00100000 > pdc_cons registered ! > The Kernel has started... > Free memory starts at: 0xc02dc000 > PALO command line: 'TERM=linux HOME=/ root=/dev/scd0' > PALO initrd 0-0 > FP CCR was 0x0, will be set to 0xc0 > model 00003000 00000481 00000000 00000000 78243572 00000000 00000004 > 0000000d 00000000 > vers 00000003 > CPUID vers 0 rev 0 > CPU(s): 1 x PA7000 at 50.000000 MHz > Searching for devices in PDC firmware... an older box... > Found devices: > 1. Stinger Optional Graphics (10) at 0xf4000000, versions 0x6, 0x0, > 0x77, 0x0, 0x0 > 2. Bushmaster Core BA (11) at 0xf082f000, versions 0x6, 0x0, 0x70, 0x0, > 0x0 > 3. Bushmaster Core SCSI (10) at 0xf0825000, versions 0x6, 0x0, 0x71, > 0x0, 0x0 > 4. Bushmaster Core LAN (802.3) (10) at 0xf0826000, versions 0x6, 0x0, > 0x72, 0x0, 0x0 > 5. Bushmaster Core HIL (10) at 0xf0821000, versions 0x6, 0x0, 0x73, 0x0, > 0x0 > 6. Bushmaster Core RS-232 (10) at 0xf0823000, versions 0x6, 0x0, 0x75, > 0x0, 0x0 > 7. Bushmaster Core RS-232 (10) at 0xf0822000, versions 0x6, 0x0, 0x75, > 0x0, 0x0 > 8. Bushmaster Core Centronics (10) at 0xf0824000, versions 0x6, 0x0, > 0x74, 0x0, 0x0 > 9. Bushmaster Audio (10) at 0xf1000000, versions 0x6, 0x0, 0x7a, 0x0, > 0x0 > 10. Bushmaster (710) (0) at 0xfffbe000, versions 0x300, 0x0, 0x4, 0x0, > 0x81 > 11. Bushmaster (1) at 0xfffbf000, versions 0x16, 0x0, 0x9, 0x0, 0x0 > That's a total of 11 devices. > Linux version 2.3.99-pre8 (bame@noam) (gcc version 2.96 20000707 > (experimental)) #24 Fri Aug 4 18:27:58 MDT 2000 > initrd: 00000000-00000000 > pagetable_init > On node 0 totalpages: 16384 > zone(0): 8192 pages. > zone(1): 8192 pages. > zone(2): 0 pages. > trap_init > Calibrating delay loop... 46.08 BogoMIPS > Memory: 61380k available > Dentry-cache hash table entries: 8192 (order: 4, 65536 bytes) > Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes) > Page-cache hash table entries: 16384 (order: 4, 65536 bytes) > kmem_create: Poisoning requested, but con given - bdev_cache > Inode-cache hash table entries: 4096 (order: 3, 32768 bytes) > kmem_create: Poisoning requested, but con given - inode_cache > POSIX conformance testing by UNIFIX > ASP version 1 at 0xf0800000 found. > request_irq(259, c01ec76c, 0x0, asp, c3fcd080) > > --------------------------------------------------------------------------- > To unsubscribe: send e-mail to parisc-linux-request@thepuffingroup.com with > `unsubscribe' as the subject. --------------EF58A87E4F8EE11A82334529--