From: Ryan Bradetich <rbradetich@uswest.net>
To: "Jorge L. deLyra" <delyra@latt.if.usp.br>
Cc: Steve Moret <smoret@uci.edu>,
parisc-linux@thepuffingroup.com, assirati@socrates.if.usp.br
Subject: Re: [parisc-linux] HP 9000/735-125
Date: Thu, 30 Nov 2000 07:01:53 -0800 [thread overview]
Message-ID: <3A266BE1.5DA1C812@uswest.net> (raw)
In-Reply-To: Pine.LNX.3.96.1001130085854.14082C-100000@latt.if.usp.br
"Jorge L. deLyra" wrote:
> > I have a 735-125 and am able to net-boot it on a custom configured kernel as
> > long as I disable the ASP parallel ports. It works quite well using an NFS
> > root as I cannot get the SCSI hard drives to mkfs. I was going to try and
> > debug it but have yet to find the free time. I can e-mail you my working
> > .config for the kernel, or build kernels (tested on my own 735) for people
> > if they need them.
>
> Well, looks like the problem is known, good! But we have a queer little
> problem with our machines here, we are unable to boot from the network. I
> think we did everything right, in fact, we are trying to use a server here
> other machines boot from, it has dhcp, boopt, tftp, rarp, the works. We
> set it all up, put the kernel on the tftpboot area, tested all that we
> could by other means but, when we try to net boot the HPs, we are faced
> with complete silence on the network. No logs on the server, nothing.
>
> A little explanation might be needed: these are not really native 735-125
> models, they were upgraded from older 720-50 models by card swapping. I am
> not sure whether all cards were changed, maybe some aspects of the machine
> are still old. The syntax of the net boot procedure in them is strange,
> you have to put in the hardware address of the server, which is unusual.
>
> I _suspect_ that this bios does not use tcp/ip for the net boot, but some
> HP proprietary protocol relating to that clustering software they have or
> used to have for these machines, in which you ran several stations out of
> the disks of a single one. In any case, a listing of what happens on the
> console on a net-boot trial goes below. We had a tail -f on the system log
> of the server, we had tcpdump listening, but nothing at all shows up...
I believe the 735/755 type machines require rbootd to boot from the network.
rbootd is available at:
ftp://puffin.external.hp.com/pub/parisc/binaries/tgz/rbootd-2.0-2.tar.gz
- Ryan
next prev parent reply other threads:[~2000-11-30 14:06 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2000-11-29 22:22 [parisc-linux] HP 9000/735-125 Jorge L. deLyra
2000-11-29 23:19 ` Grant Grundler
2000-11-29 23:28 ` Steve Moret
2000-11-30 0:10 ` Helge Deller
2000-11-30 9:20 ` Steve Moret
2000-11-30 11:27 ` Richard Hirst
2000-11-30 16:11 ` Richard Hirst
2000-11-30 17:39 ` Steve Moret
2000-11-30 17:53 ` Richard Hirst
2000-11-30 18:07 ` Grant Grundler
2000-11-30 18:18 ` Jorge L. deLyra
2000-11-30 18:01 ` Richard Hirst
2000-11-30 12:04 ` Helge Deller
2000-11-30 17:50 ` Steve Moret
2000-11-30 18:37 ` Helge Deller
2000-11-30 20:22 ` Helge Deller
2000-11-30 11:15 ` Jorge L. deLyra
2000-11-30 15:01 ` Ryan Bradetich [this message]
2000-11-30 15:04 ` Jorge L. deLyra
2000-11-30 15:49 ` Jorge L. deLyra
2000-11-30 18:21 ` Helge Deller
2000-11-30 18:36 ` Helge Deller
2000-11-30 19:11 ` Jorge L. deLyra
2000-11-30 21:04 ` Grant Grundler
2000-11-30 22:32 ` Jorge L. deLyra
2000-11-30 22:45 ` Grant Grundler
2000-11-30 23:39 ` Alex deVries
2000-11-30 23:48 ` John David Anglin
2001-01-05 23:48 ` [parisc-linux] EVC monitor cable/adapter Andi
2001-01-05 23:56 ` Matt Taggart
2000-11-30 22:57 ` [parisc-linux] HP 9000/735-125 Paul Bame
2000-11-30 10:58 ` Jorge L. deLyra
2000-11-30 11:19 ` Richard Hirst
2000-11-30 21:22 ` Richard Hirst
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3A266BE1.5DA1C812@uswest.net \
--to=rbradetich@uswest.net \
--cc=assirati@socrates.if.usp.br \
--cc=delyra@latt.if.usp.br \
--cc=parisc-linux@thepuffingroup.com \
--cc=smoret@uci.edu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox