From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from mail.alcatel.at (atusks01.alcatel.at [212.183.9.130]) by dsl2.external.hp.com (Postfix) with ESMTP id A0485482A for ; Tue, 26 Jun 2001 01:07:51 -0600 (MDT) Sender: christoph.plattner@alcatel.at Message-ID: <3B3834C1.2C1ED48E@alcatel.at> Date: Tue, 26 Jun 2001 09:07:45 +0200 From: Christoph Plattner MIME-Version: 1.0 To: Peter Weilbacher Cc: Markus Ungermann , parisc-linux@lists.parisc-linux.org Subject: Re: [parisc-linux] 712/60: No login, only crashes References: Content-Type: text/plain; charset=us-ascii List-ID: There is no script starting the virtual console, it is kernel stuff. But you can remove the login (any thing like "*getty") in the bottom of the inittab, but then you will not have any login !! The devices /dev/tty1 up to /dev/tty9 (I think) are the virtual consoles. The only way to use the full machine without virtual consoles is the use of the serial console ! The kernel line must say "console=ttyS0" and in the inittab the "*getty" should have ttyS0 as paramter .... With friendly regards Christoph P. Peter Weilbacher wrote: > > Hi Markus! > > On Mon, 25 Jun 2001, Markus Ungermann wrote: > > > Then i installed PA-Linux 0.9 on a 3.2GB-HD (Quantum Fireball 3200S ), > > but after the first reboot: > > - the system starts and > > - the Init-Process works, > > - it enter Runlevel 2 > > - then instead of a login i get an Crash > > I get a Dump list (How can i print/copy this?) and the following line: > > > > Kernel Fault Code 26 regs(differents everytime) > > I had the same error when I installed it, I think it is in the known > bugs on the webpage. The developers told me to be patient, those are > bugs in the graphical STI interface. > > A perhaps related problem is that if you try to go down further than > the end of the file in vi, it crashes with a similar dump screen. > > > Can someone help me to login ? > > Or how can i boot into single mode (there is no lilo ;-))) ? > > - Press before booting. > - search for the boot device: > search scsi > - start the ipl: > boot ipl > - edit the last parameter and add with a space: > " init=1" or " init=/bin/sh" > Starting the IPL boot should get you booted. You should then perhaps > edit /etc/inittab before trying further. > > Can anyone tell me, which script in /etc/init.d starts the virtual > consoles? It's none from the ones in /etc/rc1.d/... > > > Is the powersupply strong enough for a second intern HD (then i boot > > from the 520MB und use the Quantum as /usr) ? > > Just try it? There is a special room for a second disk in my > machine, which I cannot use because the other disks I have get too > hot. > > Gruesse, > Peter. > > _______________________________________________ > parisc-linux mailing list > parisc-linux@lists.parisc-linux.org > http://lists.parisc-linux.org/cgi-bin/mailman/listinfo/parisc-linux