Linux PARISC architecture development
 help / color / mirror / Atom feed
From: Christoph Plattner <christoph.plattner@gmx.at>
To: "Björn Bylander" <bjorn.bylander@telia.com>
Cc: parisc-linux@lists.parisc-linux.org
Subject: Re: [parisc-linux] Booting to ISL with Linux installed
Date: Sun, 20 Jan 2002 17:16:34 +0100	[thread overview]
Message-ID: <3C4AED62.F3914545@gmx.at> (raw)
In-Reply-To: DLEJJFGDAJICFFBHFNCDAEAPCEAA.bjorn.bylander@telia.com

The problem you have, is that you may have activated the `autoboot'
mode.
Try to interrupt the autoboot mode by pressing <ESC>. Then you can
disable
autoboot.

But this is not your major problem. The "ISL" prompt after booting a
LIF-IMAGE was a tool inside the LIF-IMAGE. The boot load PALO works
in a different way. PALO together with a recovery kernel is also in
a LIF-IMAGE but there are no tools, as you know from HP-UX to boot
a HP-UX kernel with the command "hpux" or "boot" and there are also
not tools like "IODC" or whatever they were called (I am no HP 
specialist, but I want to learn more and more ...).

So you need to have a LIF-IMAGE stored on a different place or
loaded from net including those HP-UX basic tools. Such a LIF
image canbe found on the HP-UX itself, called "uxbootlf" (AFAIK).

By the way: I am also interetsed in setting my 712/60 to serial 
console. But I heard, it is a problem to setup wrong values here,
as no device may fanctioning then. What have I to do, to restore
the machine to let's say "factory setups" ?

With friendly regards
Christoph


Björn Bylander wrote:
>
> Hello,
> 
> I recently acquired a HP 712/80 system. I've installed PA-RISC Linux 0.9.3 on it and it runs fine.
> I've got one problem though. I don't know how to get to ISL after I installed Linux.
> The reason I want to use ISL is that I want to (try) to make the machine use a serial console.
> Before I installed Linux the machine booted into ISL automatically as the HD was wiped (or at least not bootable) but if I try to boot to ISL now with 'boot pri isl' (from BOOT_ADMIN) I only get to the 'configuration mode' of PALO where you can enter the kernel and other boot stuff.
> 
> All in all, how can I get to the ISL> prompt so that I can use 'conspath 2/0/4.0x283'?
> 
> Thanks in advance,
> Björn Bylander
> 
> _______________________________________________
> parisc-linux mailing list
> parisc-linux@lists.parisc-linux.org
> http://lists.parisc-linux.org/mailman/listinfo/parisc-linux

-- 
-------------------------------------------------------
private:	christoph.plattner@gmx.at
company:	christoph.plattner@alcatel.at

  parent reply	other threads:[~2002-01-20 16:16 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2002-01-20 13:10 [parisc-linux] Booting to ISL with Linux installed Björn Bylander
2002-01-20 13:48 ` [parisc-linux] partitioned md to enable root on raid Peter Mottram
2002-01-21 20:32   ` Grant Grundler
2002-01-21 23:13     ` Peter Mottram
2002-01-22  2:20       ` Grant Grundler
2002-01-22  2:33         ` Matthew Wilcox
2002-01-22  4:11           ` Grant Grundler
2002-01-22  4:08         ` Grant Grundler
2002-01-22  6:32         ` Martin K. Petersen
2002-01-20 16:16 ` Christoph Plattner [this message]
2002-01-20 23:05   ` [parisc-linux] Booting to ISL with Linux installed Björn Bylander
2002-01-21  3:02     ` Matt Taggart
2002-01-21  6:59       ` [parisc-linux] sti console (was: Booting to ISL with Linux installed) Kaj-Michael Lang
2002-01-21 17:34         ` Bdale Garbee
2002-01-21 21:40           ` Christoph Plattner
2002-01-21 21:26       ` [parisc-linux] Booting to ISL with Linux installed Christoph Plattner
2002-01-22  1:51         ` Grant Grundler

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=3C4AED62.F3914545@gmx.at \
    --to=christoph.plattner@gmx.at \
    --cc=bjorn.bylander@telia.com \
    --cc=parisc-linux@lists.parisc-linux.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox