From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from spoolm2.tiscalinet.be (unknown [212.35.2.51]) by dsl2.external.hp.com (Postfix) with ESMTP id 3C2F14862 for ; Thu, 4 Jul 2002 09:27:01 -0600 (MDT) Message-ID: <3D2469AB.3080102@freebel.net> Date: Thu, 04 Jul 2002 15:28:43 +0000 From: Joel Soete MIME-Version: 1.0 To: Alex Green Cc: parisc-linux@lists.parisc-linux.org Subject: Re: [parisc-linux] Installing on C3600 References: <3D21DFDD.9090002@freebel.net> <3D21E354.8050701@freebel.net> <3D2460E6.2040608@freebel.net> Content-Type: text/plain; charset=us-ascii; format=flowed Sender: parisc-linux-admin@lists.parisc-linux.org Errors-To: parisc-linux-admin@lists.parisc-linux.org List-Help: List-Post: List-Subscribe: , List-Id: parisc-linux developers list List-Unsubscribe: , List-Archive: Humm... We would so to have a look in more details the terminal setup (baud rate 9600, flow control ,...) I will give you my setup next week (except if some one else could give you those details in the mean time). Joel Alex Green wrote: > ok thanks, > > i've got a serial term connected, but the when the installer i get screen > corruption, I have tried vt52, vt100, vt102 and hp. I have the same result > on all. > > I've got a HP 700/96 Teminal. > > Thanks again > Alex > ----- Original Message ----- > From: "Joel Soete" > To: "Alex Green" > Cc: > Sent: Thursday, July 04, 2002 4:51 PM > Subject: Re: [parisc-linux] Installing on C3600 > > > >> >>Alex Green wrote: >> >>>[....] >>> >>> >>> >>>>>If it is a hp terminal, you can change the emulation. It depends of the >>>>>terminal type but you can have a look in your user guide or test (but I >>>>>think that would request severall reboot) the emulation nearest vt100 >>>> >>>IIRC. >>> >>> >>>>>Once you have found the right emulation, try first the more stable >>>>>32-bits kernel (IIRC if you unplug ps/2 or usb mouse and keyboard, the >>>>>kernel will switch to serial console on port 1). >>>> >>>>Another good solution could also be to run minicom as console emulation. >>> >>> >>>So, should i set the terminal type to be VT102 IIRC or just VT102?.. the >>>terminal is a proper HP Serial Console. >>> >> >>Sorry I have not any material neither doc to help you right now. Next >>week I will be back to office and more accurate details for your help. >> >> >>>Is it possible to use the STI Console ( Which I believe to be the >> > Graphics > >>>Adapter Console) to start the installation? >>> >> >>Let first try to build a build a system wit serial console, than you >>would be able to choose install a more recent kernel >>(ftp://ftp.parisc-linux.org) to see if you can use STI (IIRC Standard >>Text Interface) with your Graphics adapter). >> >>So yes STI give you actually a text interface for your console on your >>Graphical adaptor through fb (Frame Buffer) support. >> >> >>>Thanks for the help >>>Alex >>> >> >>See you later, >>Joel >> >> >>_______________________________________________ >>parisc-linux mailing list >>parisc-linux@lists.parisc-linux.org >>http://lists.parisc-linux.org/mailman/listinfo/parisc-linux >> > > > > _______________________________________________ > parisc-linux mailing list > parisc-linux@lists.parisc-linux.org > http://lists.parisc-linux.org/mailman/listinfo/parisc-linux >