Linux PARISC architecture development
 help / color / mirror / Atom feed
From: Christoph Plattner <christoph.plattner@gmx.at>
To: Stian Soiland <stain@itea.ntnu.no>
Cc: Ryan Bradetich <rbradetich@uswest.net>,
	parisc-linux@lists.parisc-linux.org
Subject: Re: [parisc-linux] 9000/802/K250 won't boot with images - serial/stack problem?
Date: Tue, 01 Oct 2002 00:39:53 +0200	[thread overview]
Message-ID: <3D98D2B9.659E5A0B@gmx.at> (raw)
In-Reply-To: 20020930204559.GB9133@itea.ntnu.no

As far as I see the problem: YES, you must use the
serial porton the MDP (port 0 !). Or use the PDC console
instead of MUX driver, then you are on the safe side,
concerning the console connecting method. The PDC
conolse driver takes that interface, which is configured
in the PDC monitor as console, independent of device
type, chips, ports, etc...

For a 15-pin layout, I cannot give you info. I only can
help on the MUX with the 25DB-SUB used on E55 and similar.

Christoph


Stian Soiland wrote:
> 
> On 2002-09-30 22:19:51, Ryan Bradetich wrote:
> 
> > > The serial console is connected to 'CONSOLE (X/4/0/0)*',
> > This is good, see .. we even find the device :)
> > > 6. Sahp Baat Kiuh AP/MUX (5) at 0xf1900000 [10/4/0], versions 0x44,
> > 0x0, 0xd
> > > Command line for kernel: 'ramdisk_size=8192 root=/dev/ram console=ttyS0
> > Oops... this is bad.  The K class systems do not have a 16550 compatible
> > serial port.  The console should be ttyB0.
> > For mor info on the console, see Matthew's excellent description of what
> > systems use the Serial Mux driver.
> > http://lists.parisc-linux.org/pipermail/parisc-linux/2002-September/017837.html
> 
> Aha! :=)
> 
> But with:
> 
> Command line for kernel: 'ramdisk_size=8192 root=/dev/ram console=ttyB0
> TERM=vt102 palo_kernel=0/vmlinux'
> 
> (..)
> 
> Branching to kernel entry point 0x00100098.  If this is the last
> message you see, you may need to switch your console.  This is
> a common symptom -- search the FAQ and mailing list at parisc-linux.org
> 
> And that IS the last thing I see :/
> 
> with console=ttyS0 at least more output came. How do I 'switch console'?
> 
> Do I need to connect something to this MDP-port instead?
> (how? It is some inverted rs232 15-pin)
> 
> This happens with both vmlinux32 og 64.
> 
> --
> Stian Søiland               There are only 10 types of people in the world:
> ITEA systemdrift            Those who understand binary, and those who don't.
> http://www.stud.ntnu.no/
> 
> _______________________________________________
> parisc-linux mailing list
> parisc-linux@lists.parisc-linux.org
> http://lists.parisc-linux.org/mailman/listinfo/parisc-linux

-- 
-------------------------------------------------------
private:	christoph.plattner@gmx.at
company:	christoph.plattner@alcatel.at

  parent reply	other threads:[~2002-09-30 22:39 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2002-09-30 20:08 [parisc-linux] 9000/802/K250 won't boot with images - serial/stack problem? Stian Soiland
2002-09-30 20:19 ` Ryan Bradetich
2002-09-30 20:39   ` Matthew Wilcox
2002-09-30 20:45   ` Stian Soiland
2002-09-30 21:06     ` Ryan Bradetich
2002-09-30 21:22       ` Matthew Wilcox
2002-09-30 22:39     ` Christoph Plattner [this message]
2002-10-01  1:18       ` Stian Soiland
2002-10-01 21:40         ` Christoph Plattner

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=3D98D2B9.659E5A0B@gmx.at \
    --to=christoph.plattner@gmx.at \
    --cc=parisc-linux@lists.parisc-linux.org \
    --cc=rbradetich@uswest.net \
    --cc=stain@itea.ntnu.no \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox