From: Joel Soete <joel.soete@tiscali.be>
To: Arjen Hommersom <arjenh@chello.nl>
Cc: parisc-linux@lists.parisc-linux.org
Subject: Re: [parisc-linux] sstfb crash
Date: Fri, 25 Apr 2003 18:19:35 +0000 [thread overview]
Message-ID: <3EA97C37.5010403@tiscali.be> (raw)
In-Reply-To: <200304251813.33948.arjenh@chello.nl>
Arjen Hommersom wrote:
>On Friday 25 April 2003 18:57, Joel Soete wrote:
>
>
>>>I just tried to test my Voodoo2 card on a C240 machine. I compiled
>>>2.4.20-pa32 and set CONFIG_FB_VOODOO1=m. The compiler was 3.0.4.
>>>Unfortunately it crashes when i try to load it. The following messages
>>>appear just before it locks up hard: [dump]
>>>
>>>
>>It would be also of good help if you try to run the dump_analyser.sh (T.
>>Varene) on this 'dump' with your kernel.
>>
>>
>
>Thanks for your reply. I have attached the output of the dump_analyser.
>
>regards,
>Arjen Hommersom
>
>------------------------------------------------------------------------
>
Interesting, isn't it :)
>IAOQ = 10135394
>Func: kfree, Off: 34, Addr: 0x10135394
>
here is the kernel function which made panic kernel. (why? we need
expert help)
>10135390: 00 01 0d 60 ssm 1,r0
>10135394: 35 d3 00 30 ldo 18(r14),r19
>10135398: 4a 63 00 c8 ldw 64(r19),r3
>1013539c: 36 73 00 c8 ldo 64(r19),r19
>
>GR0 = 00000000
>
>GR1 = 102ad810
>Func: vm_table, Off: c, Addr: 0x102ad810
>102ad810: 92 e0 b0 64 cmpiclr,>> 32,r23,r0
>102ad814: 34 17 00 64 ldi 32,r23
>102ad818: 8a e6 80 48 cmpb,>>= r6,r23,102ad844 <tcp_retransmit_timer+0xe4>
>102ad81c: 34 05 00 02 ldi 1,r5
>
>GR2 = 101f5f68
>Func: fb_alloc_cmap, Off: 3c, Addr: 0x101f5f68
>101f5f60: eb f8 1d 9c b,l 10227e34 <sr_audio_ioctl+0x2b4>,r31
>101f5f64: 0b 83 0a 03 add,l r3,ret0,r3
>101f5f68: 08 1d 02 5a copy ret1,r26
>101f5f6c: 08 ba 0a 1a add,l r26,r5,r26
>
>GR3 = 1ebe5ab4
>
>GR4 = 00000000
>
>GR5 = 00000000
>
>GR6 = 00000000
>
>GR7 = 1ebe5800
>
>GR8 = ffffffff
>
>GR9 = 1ec64810
>
>GR10 = 6269745f
>
>GR11 = 1ebaa000
>
>GR12 = 1fdabcc0
>
>GR13 = 1ec64550
>
>GR14 = 000435a8
>
>GR15 = 00042da8
>
>GR16 = 00042da8
>
>GR17 = 00042da8
>
>GR18 = 000521c8
>
>GR19 = 00450192
>
>GR20 = 001f5dce
>
>GR21 = 2bb0e9ab
>
>GR22 = eae3e71d
>
>GR23 = 745f6c6f
>
>GR24 = 00000000
>
>GR25 = 00000000
>
>GR26 = 745f6c6f
>
>GR27 = 10292010
>Func: $global$, Off: 0, Addr: 0x10292010
>10292010: 6f cd 01 00 stw,ma r13,80(sp)
>
>GR28 = 0000000f
>
>GR29 = f3000000
>
>GR30 = 1ec64900
>
>GR31 = 101f20d4
>Func: pci_write_config_dword, Off: 40, Addr: 0x101f20d4
>
iirc this is the calling function
>101f20d0: 0a 98 02 14 and r24,r20,r20
>101f20d4: 34 13 00 80 ldi 40,r19
>101f20d8: 82 93 20 70 cmpb,= r19,r20,101f2118 <set_geometry_intr+0x70>
>101f20dc: 34 1c 00 00 ldi 0,ret0
>
>Kernel symbols on the stack:
>[<10159e6c>]: Func: seq_read, Off: 318, Addr: 0x10159e6c
>[<0003242c>]:
>[<0003556c>]:
>[<00032adc>]:
>[<000355cc>]:
>[<0003556c>]:
>[<00034fee>]:
>[<00034940>]:
>[<00034fb4>]:
>[<0003556c>]:
>[<000355a4>]:
>[<101f1ac8>]: Func: pci_announce_device, Off: 60, Addr: 0x101f1ac8
>[<000355a4>]:
>[<101f1b90>]: Func: pci_register_driver, Off: 98, Addr: 0x101f1b90
>[<000355a4>]:
>[<000345c8>]:
>[<1011cff0>]: Func: sys_init_module, Off: 640, Addr: 0x1011cff0
>[<101049fc>]: Func: handle_interruption, Off: 150, Addr: 0x101049fc
>[<00032060>]:
>[<10109f90>]: Func: syscall_exit, Off: 0, Addr: 0x10109f90
>[<0002b800>]:
>[<10109084>]: Func: intr_check_sig, Off: 0, Addr: 0x10109084
>[<10108cf4>]: Func: _switch_to_ret, Off: 0, Addr: 0x10108cf4
>[<1013eaac>]: Func: chrdev_open, Off: 54, Addr: 0x1013eaac
>[<1013d610>]: Func: dentry_open, Off: 1e8, Addr: 0x1013d610
>[<1014db28>]: Func: locate_fd, Off: 88, Addr: 0x1014db28
>[<1011f77c>]: Func: it_real_fn, Off: 0, Addr: 0x1011f77c
>
>Done.
>
>
I will be interested by expert analyse.
Sorry to not be helpfull,
Joel
next prev parent reply other threads:[~2003-04-25 18:06 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-04-25 12:08 [parisc-linux] sstfb crash Arjen Hommersom
2003-04-25 16:57 ` Joel Soete
2003-04-25 16:13 ` Arjen Hommersom
2003-04-25 18:19 ` Joel Soete [this message]
2003-04-26 18:14 ` Arjen Hommersom
2003-04-25 22:52 ` Grant Grundler
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3EA97C37.5010403@tiscali.be \
--to=joel.soete@tiscali.be \
--cc=arjenh@chello.nl \
--cc=parisc-linux@lists.parisc-linux.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox