Thanks
Jesse
Cypress Technology Inc
727-557-0911
Derek Engelhaupt wrote:
You will need one of the following cards: A4977A (PCI), A4450A (GSC), or A4451A (GSC dual head). Part numbers are listed below. You will also need an EVC to 15-pin converter for all of these cards and that part number is listed below also. All of this info came from partsurfer.hp.com (no "www" in front of it). There is a PCI EG card for sale on Ebay: http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=3031053367&category=11221 Looks like Cypress Tech ( sales@cypress-tech.com) have some of the A4450A GSC cards, but I've never had any dealings with them. Their prices on Ebay seem high though. Good luck.
A4450-66501 636.00
VISUALIZE-EG graphic accelerator board - For 2D and 3D wireframe graphics - Includes color recovery (P/O A4450A)
A4451-66501 1644.00
Dual VISUALIZE-EG graphic accelerator board - For 2D and 3D wireframe graphics - Includes color recovery (A4451A)
1253-0635 28.00
Enhanced Video Connector (EVC) video adapter cable - EVC(M) to 15-pin(F) - 7.87in (0.2m) long - Used to connect EVC video output to 15-pin monitor
A4977-66501
VIZUALIZE-EG/PCI
Zlatan Jukic <zlatan.jukic@fh-vorarlberg.ac.at> wrote:Hello Derek and all,Thank you for your assistance. Thank you Grant, too!
You already tested this card (Vis EG HSC) on your HP-Visualize C360 machine. The X-Windows system should be started in this case.
Can you say me please, where can I find/order and buy this card?
Thank you very much,
Kind regards, Zlatan
-----Original Message-----
From: Derek Engelhaupt [mailto:derekengelhaupt@rocketmail.com]
Sent: Mittwoch, 18. Juni 2003 18:00
To: Grant Grundler; Jukic Zlatan
Cc: parisc-linux@lists.parisc-linux.org
Subject: Re: [parisc-linux] Re: Visualize EG card on HP PARISC C360
Yes, there is an HSC EG card. Used it in my C360 before I sold it. The PCI version of the card has more memory on it though.derekGrant Grundler <grundler@parisc-linux.org> wrote:On Tue, Jun 17, 2003 at 04:17:02PM +0200, Zlatan Jukic wrote:
> I could not start unfortunately the X-Windows system, because it is not
> supported by Fx-4 video card.?!correct
> My question is here: Must I insert another card (and which??), in order to
> start X-Windows-system?> According to Debian HPPA, the Visualize EG should correct to function.
yes. *PCI* version of the card.
Vis-EG HSC card might also work.> This card is a 24-bit-video-card, which is recognized in the best way under
> Linux as "Coral" with HP 715-64,Is that really a Vis-EG HSC card?
Can you post "dmesg" output where STI describes the card?grant
_______________________________________________
parisc-linux mailing list
parisc-linux@lists.parisc-linux.org
http://lists.parisc-linux.org/mailman/listinfo/parisc-linux
SBC Yahoo! DSL - Now only $29.95 per month!
Do you Yahoo!?
SBC Yahoo! DSL - Now only $29.95 per month!