Re: [parisc-linux] Linux on HP

[Joel Soete <soete.joel@tiscali.be>]

Hi Damian,

Can you give more detail on the model of your "HP computer".
I encounter a similar problem with a b2000 because of a pb between pdc 
console support and Suckio driver for the ide-cdrom.

I was too lasy to learn how to build a custom net-iso cd, so I copy a 
system disk (installed on a b180) on an external disk. Then i boot the 
b2k with this disk plug in an additional scsi controler, to finaly copy 
its contain on the internal disk (and when the disk went down, I just 
follow the same procedure :) ).

hth,
	Joel

Damian Muchliński wrote:
> Hello
> 
> I'm trying to set-up linux on HP computer. First I've tried Debian Stable
> Woody relase with 2.4.17 kernel but i got message WARNING! Stack pointer
> and cr30 do not correspond! I've found on newsgroup that because of old
> version of gcc and kernel and I should use newer version. So I have
> downloaded palinux-2.4.22-pa13-20031022-netinst.iso from your
> website,check md5, burned and booted.
> Unfortunately it hangs on "searching for devices" without any more info.
> I would be very gratefull if you could help me solve this problem. Maybe
> somemone else had similar problem.
>  
>  I've attached files with bugreport.
> 
> 
> Thanks for any suggestions, waiting for reply from you.
>