From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from cpout2.tiscali.be (cpout2.tiscali.be [62.235.13.194]) by dsl2.external.hp.com (Postfix) with ESMTP id 349FD4879 for ; Tue, 20 Jan 2004 11:12:48 -0700 (MST) Date: Tue, 20 Jan 2004 19:12:45 +0100 Message-ID: <400CB89F00000C0C@ocpmta2.freegates.net> From: "Joel Soete" Subject: Re: [parisc-linux] init and exit text problem To: "Grant Grundler" MIME-Version: 1.0 Content-Type: text/plain; charset="ISO-8859-1" Cc: PARISC list List-Id: parisc-linux developers list List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Hi Grant, > yes - certainly ftp://ftp.parisc-linux.org/patches/diff-2.6.1-bridge_ctl Ok I applied it against 2.6.1-pa8 (+ some already accepted patch of Matthew and James related to sym2 driver ;) ). Compiled with unstable debian gcc-3.3.3 and defconfig, it compiles and boots well on the b2k ;) (and I am on going to recompile toolchain with it and all seems to works fine ;) ). Thanks a lot, Joel ps: I also drive severall test: Unfortunately, it doesn't help to boot with 64bit kernel on this system (neither build with my gcc-hppa64_3.3.2 nor with unofficial-deb gcc-hppa64_3.0.4ds3-7.1_hppa.deb which should the one to use iirc) And with your config file it always do an hpmc with the 3 compilers I used (debian gcc-3.3.3, gcc-hppa64 (from gcc-hppa64_3.0.4d 3-7.1_hppa.deb), my own gcc-hppa64_3.3.2), so I would have to find what breaks for b2k even in 32bit kernel (that will take a long time). The bad thing is that I don't reach to get any relevant iaoq address from pim to start investigation :( (just know that it failed very early after '-- search the FAQ and mailing list...') hmm just noticed the following diff: Command line for kernel: 'root=/dev/sda5 HOME=/ console=ttyS0 TERM=vt102 palo_kernel=3/vmlinux-2.6.1-pa7' Selected kernel: /vmlinux-2.6.1-pa7 from partition 3 ELF32 executable Entry 001002f0 first 00100000 n 3 Segment 0 load 00100000 size 2586936 mediaptr 0x1000 Segment 1 load 00378000 size 368640 mediaptr 0x279000 Segment 2 load 003d4000 size 553093 mediaptr 0x2d3000 Branching to kernel entry point 0x001002f0. If this is the last message you see, you may need to switch your console. This is a common symptom -- search the FAQ and mailing list at parisc-linux.org [snip] normal boot Command line for kernel: 'roo =/dev/sda5 HOME=/ console=ttyS0 TERM=vt102 palo_kernel=3/vmlinux-26-up64-gcc30' Selected kernel: /vmlinux-26-up64-gcc30 from partition 3 ELF64 executable Entry 00100000 first 00100000 n 2 Segment 0 load 00100000 size 3529136 mediaptr 0x1000 Segment 1 load 00460000 size 237702 mediaptr 0x35f000 Branching to kernel entry point 0x00100000. If this is the last message you see, you may need to switch your console. This is a common symptom -- search the FAQ and mailing list at parisc-linux.org HPMC So 3 segment loaded in 32bit and only 2 in 64bit, is it normal (i lost info on the N4k boot :( ). And also seems to "Branching to" a wrong entry point? ------------------------------------------------------------------------- Tiscali ADSL: 12 mois à 29,50 €/mois! L'Internet rapide, c'est pour tout le monde. http://reg.tiscali.be/default.asp?lg=fr