From: "Joel Soete" <soete.joel@tiscali.be>
To: "Grant Grundler" <grundler@parisc-linux.org>,
"M. Grabert" <xam@cs.ucc.ie>
Cc: Matthew Wilcox <willy@debian.org>, parisc-linux@lists.parisc-linux.org
Subject: Re: [parisc-linux] b2k scsi disk pb
Date: Mon, 23 Feb 2004 09:16:16 +0100 [thread overview]
Message-ID: <402A42A100007EE7@ocpmta1.freegates.net> (raw)
Hello Grant,
>The "hang" is because no IO's are processed until 3 seconds
>after the BUS RESET is issued.
Typicaly the behaviour observed.
>> Got rid of it by not using the SE-SCSI driver ;)
>> Try to physically detach the (not-used) ST336704LC.
>
>I was pretty sure "LC" suffix meant LVD with SCA 80 pin connector.
>Specs on seagate.com are easy to find if you know the model.
In fact according <http://www.seagate.com/cgi-bin/view.cgi?/scsi/st336704.lw>
it has the two possiblity SE or LVD according HW config (a side jumper J2
if i well understand)
>If both internal devices are LVD, check early sym2 dmesg output
>to verify the SCSI bus is operating in LVD mode (vs SE).
But here they seems to work together in LVD mode:
[snip]
Uniform CD-ROM driver Revision: 3.20
sym0: <895a> rev 0x1 at pci 0000:00:0f.0 irq 129
sym0: No NVRAM, ID 7, Fast-40, LVD, parity checking
sym0: SCSI BUS has been reset.
scsi0 : sym-2.1.18i
sym0:0:0: ABORT operation started.
sym0:0:0: ABORT opera
ion complete.
sym0:0:0: DEVICE RESET operation started.
sym0:0:0: DEVICE RESET operation failed.
sym0:0:0: BUS RESET operation started.
sym0:0:0: BUS RESET operation failed.
sym0:0:0: HOST RESET operation started.
sym0:0:0: HOST RESET operation failed.
scsi: Device offlined - not ready after error recovery: host 0 channel 0
id 0 lun 0
Vendor: QUANTUM Model: ATLAS5-9LVD Rev: HP04
Type: Direct-Access ANSI SCSI revision: 03
sym0:5:0: tagged command queuing enabled, command queue depth 16.
sym0:5: FAST-40 WIDE SCSI 80.0 MB/s ST (25.0 ns, offset 31)
Vendor: SEAGATE Model: ST336704LC Rev: HP03
Type: Direct-Access ANSI SCSI revision: 03
sym0:6:0: tagged command queuing enabled, command queue depth 16.
sym0:6: FAST-40 WIDE SCSI 80.0 MB/s ST (25.0 ns, offset 31)
[snip]
Anyway what sym2 look for at scsi id 0?
I will try also later to remove ST disk ad advise ;)
Thanks for attention and advise,
Joel
----------------------------------------------------------------------------------------
Tiscali ADSL: 19,50 /mois, pendant 3 mois! L'Internet rapide, c'est pour
tout le monde.
http://reg.tiscali.be/default.asp?lg=fr
next reply other threads:[~2004-02-23 8:56 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-02-23 8:16 Joel Soete [this message]
2004-02-24 16:11 ` [parisc-linux] b2k scsi disk pb Grant Grundler
-- strict thread matches above, loose matches on Subject: below --
2004-02-20 17:56 Joel Soete
2004-02-20 19:07 ` M. Grabert
2004-02-21 18:13 ` Joel Soete
2004-02-22 3:23 ` Grant Grundler
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=402A42A100007EE7@ocpmta1.freegates.net \
--to=soete.joel@tiscali.be \
--cc=grundler@parisc-linux.org \
--cc=parisc-linux@lists.parisc-linux.org \
--cc=willy@debian.org \
--cc=xam@cs.ucc.ie \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox