Linux PARISC architecture development
 help / color / mirror / Atom feed
From: Joel Soete <soete.joel@tiscali.be>
To: maillist parisc-linux <parisc-linux@lists.parisc-linux.org>
Subject: [parisc-linux] c110: kernel 2.6.10-rc1-pa17 pb to boot if a cdrom is in the drive
Date: Sat, 27 Nov 2004 19:34:24 +0000	[thread overview]
Message-ID: <41A8D6C0.7000306@tiscali.be> (raw)

Hello all,

I grab a support+ cdrom to test a scsi disk of model "SEAGATE ST34573W" with ode diskutil.

As it didn't detect any disk read error, I want to reboot linux kernel on my c110 but I forget to remove the cdrom from it's drive.
And I got following pb when I reboot linux (kernel 2.6.10-rc1-pa10:
[...]
53c700: Version 2.8 By James.Bottomley@HansenPartnership.com
scsi1: 53c710 rev 2
scsi1 : LASI SCSI 53c700
   Vendor: HP        Model: DVD-ROM 6x/32x    Rev: 1.08
   Type:   CD-ROM                             ANSI SCSI revision: 02
  target1:0:0: Beginning Domain Validation
scsi1: (0:0) Asynchronous
scsi1: (0:0) Synchronous at offset 8, period 100ns
  target1:0:0: Echo buffer size 5280 is too big, trimming to 4096
  target1:0:0: Domain Validation detected failure, dropping back
scsi1: (0:0) Synchronous at offset 8, period 152ns
  target1:0:0: Domain Validation detected failure, dropping back
scsi1: (0:0) Synchronous at offset 8, period 252ns
  target1:0:0: Domain Validation detected failure, dropping back
scsi1: (0:0) Synchronous at offset 8, period 400ns
scsi1 (0:0) New error handler wants to abort command
         scsi1 : destination target 0, lun 0
         command = 0x03 00 00 00 60 00
scsi1 (0:0) New error handler wants device reset
         scsi1 : destination target 0, lun 0
         command = 0x03 00 00 00 60 00
scsi1 (0:0) New error handler wants BUS reset, cmd 2fd1ab60
         scsi1 : destination target 0, lun 0
         command = 0x03 00 00 00 60 00
scsi1: Bus Reset detected, executing command 2fd1ab60, slot 2fd70520, dsp 001d8528[0528]
  failing command because of reset, slot 2fd70520, cmnd 2fd1ab60
scsi1 (0:0) broken device is looping in contingent allegiance: ignoring
scsi1 (0:0) New error handler wants to abort command
         scsi1 : destination target 0, lun 0
         command = 0x03 00 00 00 60 00
scsi1 (0:0) New error handler wants device reset
         scsi1 : destination target 0, lun 0
         command = 0x03 00 00 00 60 00
scsi1 (0:0) New error handler wants BUS reset, cmd 2fd1ab60
         scsi1 : destination target 0, lun 0
         command = 0x03 00 00 00 60 00
scsi1: Bus Reset detected, executing command 2fd1ab60, slot 2fd70520, dsp 001d8528[0528]
  failing command because of reset, slot 2fd70520, cmnd 2fd1ab60
scsi1 (0:0) broken device is looping in contingent allegiance: ignoring
scsi1 (0:0) New error handler wants to abort command
         scsi1 : destination target 0, lun 0
         command = 0x03 00 00 00 60 00
scsi1 (0:0) New error handler wants device reset
         scsi1 : destination target 0, lun 0
         command = 0x03 00 00 00 60 00
scsi1 (0:0) New error handler wants BUS reset, cmd 2fd1ab60
         scsi1 : destination target 0, lun 0
         command = 0x03 00 00 00 60 00
scsi1: Bus Reset detected, executing command 2fd1ab60, slot 2fd70520, dsp 001d8528[0528]
  failing command because of reset, slot 2fd70520, cmnd 2fd1ab60
scsi1 (0:0) broken device is looping in contingent allegiance: ignoring
scsi1 (0:0) broken device is looping in contingent allegiance: ignoring
  target1:0:0: Domain Validation detected failure, dropping back
scsi1: (0:0) Synchronous at offset 0, period 0ns
  target1:0:0: Domain Validation detected failure, dropping back
scsi1: (0:0) Asynchronous
  target1:0:0: Domain Validation Failure, dropping back to Asynchronous
  target1:0:0: Ending Domain Validation
   Vendor: SEAGATE   Model: ST34573W          Rev: HP11
   Type:   Direct-Access                      ANSI SCSI revision: 02
  target1:0:3: Beginning Domain Validation

until I remove the cdrom then it continue the boot:
scsi1: (3:0) Asynchronous
scsi1: (3:0) Enabling Tag Command Queuing
scsi1: (3:0) Synchronous at offset 8, period 100ns
  target1:0:3: Domain Validation skipping write tests
  target1:0:3: Ending Domain Validation
...

Any idea?

Thanks in advance,
	Joel
_______________________________________________
parisc-linux mailing list
parisc-linux@lists.parisc-linux.org
http://lists.parisc-linux.org/mailman/listinfo/parisc-linux

                 reply	other threads:[~2004-11-27 19:34 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=41A8D6C0.7000306@tiscali.be \
    --to=soete.joel@tiscali.be \
    --cc=parisc-linux@lists.parisc-linux.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox