From mboxrd@z Thu Jan 1 00:00:00 1970 From: Randolph Chung Subject: Re: HPPA hang with PCI SERR or PARITY enabling Date: Fri, 31 Jul 2009 09:25:44 +0800 Message-ID: <4A724818.4080909@tausq.org> References: <20090615134519.6EE824FC5@hiauly1.hia.nrc.ca> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Cc: John David Anglin , linux-parisc@vger.kernel.org To: Meelis Roos Return-path: In-Reply-To: List-ID: List-Id: linux-parisc.vger.kernel.org Please see http://www.parisc-linux.org/faq/kernelbug-howto.html (Thought I just noticed some bits of it are no longer true, such as the address ranges) Anyway, from the output below, I suspect maybe we have some kernel functions that are not in the right section, since the error happens right after "Freeing unused kernel memory"? But this is just a guess. randolph Meelis Roos wrote: >>> 0x0000007000FF6292 000000F0 F0000000 - type 0 = Data Field Unused >>> 0x5800087000FF6292 00006D05 0F092C37 - type 11 = Timestamp 06/15/2009 09:44:55 >> I believe FF6292 is a HPMC. Please collect and post the "ser pim" output >> for the above. It would also help if the location of the HPMC can be related >> to your compiled kernel using objdump. > > Well, it took some time, but I'm back to it. I rebooted a > Debian-packaged kernel and got SER PIM output as well for the same boot. > I also checked that there's nothing more in GSP console log. > > As I can't boot it up with any kernel currently, I could not objdump the > specific image, but I know it's 2.6.29-5 version of Debian > 2.6.29-2-parisc64-smp kernel. Will investigate if I get a match - what > address should I be decoding? > > Main Menu: Enter command or menu > bo > NOTICE: System integrity at risk when selftest(s) are disabled. > Enabling selftests with "ser sel on" will prevent this note. > Do you wish to continue the boot? [Y] or N: y > Interact with IPL (Y, N, or Cancel)?> y > > Booting... > Boot IO Dependent Code (IODC) revision 1 > > > HARD Booted. > palo ipl 1.14 root@penalosa Wed Oct 8 15:04:37 UTC 2008 > Skipping extended partition 6 - beyond reach of IPL > > Partition Start(MB) End(MB) Id Type > 1 1 31 f0 Palo > 2 32 156 83 ext2 > 5 157 33408 83 ext2 > > PALO(F0) partition contains: > 0/vmlinux64 6240197 bytes @ 0x48000 > > Information: No console specified on kernel command line. This is normal. > PALO will choose the console currently used by firmware (serial).Current command line: > 2/vmlinux root=/dev/sda5 initrd=2/initrd.img HOME=/ console=ttyS0 TERM=vt102 > 0: 2/vmlinux > 1: root=/dev/sda5 > 2: initrd=2/initrd.img > 3: HOME=/ > 4: console=ttyS0 > 5: TERM=vt102 > > <#> edit the numbered field > 'b' boot with this command line > 'r' restore command line > 'l' list dir > ? 0 l > Directory listing of /. > > lost+found > vmlinux > initrd.img-2.6.29-rc1.bak > initrd.img > vmlinux.old > System.map-2.6.29-rc1 > vmlinux-2.6.29-rc1 > config-2.6.29-rc8 > System.map-2.6.29-rc8 > vmlinux-2.6.29-rc8 > initrd.img-2.6.29-rc8 > config-2.6.29-rc1 > initrd.img-2.6.29-rc1 > System.map-2.6.26-1-parisc64-smp > System.map-2.6.26-1-parisc64 > config-2.6.26-1-parisc64 > vmlinux-2.6.26-1-parisc64 > vmlinux-2.6.26-1-parisc64-smp > config-2.6.26-1-parisc64-smp > initrd.img-2.6.26-1-parisc64-smp > initrd.img-2.6.26-1-parisc64 > initrd.img.old > initrd.img-2.6.26-1-parisc64-smp.bak > System.map-2.6.29-2-parisc64-smp > vmlinux-2.6.29-2-parisc64-smp > config-2.6.29-2-parisc64-smp > initrd.img-2.6.29-2-parisc64-smp > > Current command line: > 2/vmlinux root=/dev/sda5 initrd=2/initrd.img HOME=/ console=ttyS0 TERM=vt102 > 0: 2/vmlinux > 1: root=/dev/sda5 > 2: initrd=2/initrd.img > 3: HOME=/ > 4: console=ttyS0 > 5: TERM=vt102 > > <#> edit the numbered field > 'b' boot with this command line > 'r' restore command line > 'l' list dir > ? 0 > 2/vmlinux-2.6.29-2-parisc64-smp > Current command line: > 2/vmlinux-2.6.29-2-parisc64-smp root=/dev/sda5 initrd=2/initrd.img HOME=/ console=ttyS0 TERM=vt102 > 0: 2/vmlinux-2.6.29-2-parisc64-smp > 1: root=/dev/sda5 > 2: initrd=2/initrd.img > 3: HOME=/ > 4: console=ttyS0 > 5: TERM=vt102 > > <#> edit the numbered field > 'b' boot with this command line > 'r' restore command line > 'l' list dir > ? 0 2 > initrd=2/initrd.img-2.6.29-2-parisc64-smp > Current command line: > 2/vmlinux-2.6.29-2-parisc64-smp root=/dev/sda5 initrd=2/initrd.img-2.6.29-2-parisc64-smp HOME=/ console=ttyS0 TERM=vt102 > 0: 2/vmlinux-2.6.29-2-parisc64-smp > 1: root=/dev/sda5 > 2: initrd=2/initrd.img-2.6.29-2-parisc64-smp > 3: HOME=/ > 4: console=ttyS0 > 5: TERM=vt102 > > <#> edit the numbered field > 'b' boot with this command line > 'r' restore command line > 'l' list dir > ? 0 b > > Command line for kernel: 'root=/dev/sda5 HOME=/ console=ttyS0 TERM=vt102 palo_kernel=2/vmlinux-2.6.29-2-parisc64-smp' > Selected kernel: /vmlinux-2.6.29-2-parisc64-smp from partition 2 > Selected ramdisk: /initrd.img-2.6.29-2-parisc64-smp from partition 2 > ELF64 executable > Entry 00100000 first 00100000 n 3 > Segment 0 load 00100000 size 4784128 mediaptr 0x1000 > Segment 1 load 00628000 size 403984 mediaptr 0x491000 > Segment 2 load 0068c000 size 317824 mediaptr 0x4f4000 > Loading ramdisk 7887983 bytes @ 3f868000... > Branching to kernel entry point 0x00100000. If this is the last > message you see, you may need to switch your console. This is > a common symptom -- search the FAQ and mailing list at parisc-linux.org > > [ 0.000000] Initializing cgroup subsys cpuset > [ 0.000000] Initializing cgroup subsys cpu > [ 0.000000] Linux version 2.6.29-2-parisc64-smp (Debian 2.6.29-5) (waldi@debian.org) (gcc version 4.3.3 (GCC) ) #1 SMP Mon May 18 14:55:30 UTC 2009 > [ 0.000000] unwind_init: start = 0x404bf0a4, end = 0x404eb424, entries = 11320 > [ 0.000000] WARNING: Out of order unwind entry! 00000000404c0fb4 and 00000000404c0fc4 > [ 0.000000] WARNING: Out of order unwind entry! 00000000404c0fc4 and 00000000404c0fd4 > [ 0.000000] FP[0] enabled: Rev 1 Model 16 > [ 0.000000] The 64-bit Kernel has started... > [ 0.000000] console [ttyB0] enabled > [ 0.000000] Initialized PDC Console for debugging. > [ 0.000000] Determining PDC firmware type: 64 bit PAT. > [ 0.000000] model 00005c90 00000491 00000000 00000002 2353fbcb 100000f0 00000008 000000b2 000000b2 > [ 0.000000] vers 00000203 > [ 0.000000] CPUID vers 17 rev 8 (0x00000228) > [ 0.000000] capabilities 0x1 > [ 0.000000] model 9000/800/L1000-44 > [ 0.000000] Total Memory: 3072 MB > [ 0.000000] initrd: 7f868000-7ffedc6f > [ 0.000000] initrd: reserving 3f868000-3ffedc6f (mem_max c0000000) > [ 0.000000] SMP: bootstrap CPU ID is 0 > [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 775680 > [ 0.000000] Kernel command line: root=/dev/sda5 HOME=/ console=ttyS0 TERM=vt102 palo_kernel=2/vmlinux-2.6.29-2-parisc64-smp > [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) > [17179569.184000] Console: colour dummy device 160x64 > [17179569.200000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) > [17179569.240000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) > [17179569.760000] Memory: 3075708k/3145728k available (3164k kernel code, 69364k reserved, 1459k data, 312k init) > [17179569.772000] virtual kernel memory layout: > [17179569.772000] vmalloc : 0x0000000000008000 - 0x000000003f000000 (1007 MB) > [17179569.772000] memory : 0x0000000040000000 - 0x0000000100000000 (3072 MB) > [17179569.772000] .init : 0x000000004068c000 - 0x00000000406da000 ( 312 kB) > [17179569.772000] .data : 0x00000000404173d0 - 0x0000000040584000 (1459 kB) > [17179569.772000] .text : 0x0000000040100000 - 0x00000000404173d0 (3164 kB) > [17179569.840000] Calibrating delay loop... 876.54 BogoMIPS (lpj=1753088) > [17179569.936000] Security Framework initialized > [17179569.944000] SELinux: Disabled at boot. > [17179569.956000] Mount-cache hash table entries: 256 > [17179570.060000] Initializing cgroup subsys ns > [17179570.068000] Initializing cgroup subsys cpuacct > [17179570.072000] Initializing cgroup subsys devices > [17179570.076000] Initializing cgroup subsys freezer > [17179570.080000] Initializing cgroup subsys net_cls > [17179570.096000] Brought up 1 CPUs > [17179570.348000] net_namespace: 1880 bytes > [17179570.352000] regulator: core version 0.5 > [17179570.480000] NET: Registered protocol family 16 > [17179570.492000] EISA bus registered > [17179570.500000] Searching for devices... > [17179571.076000] Found devices: > [17179571.080000] 1. Rhapsody DC- 440 at 0xfffffffffffa0000 [160] { 0, 0x0, 0x5c9, 0x00004 } > [17179571.092000] 2. Rhapsody DC- 440 at 0xfffffffffffa6000 [166] { 0, 0x0, 0x5c9, 0x00004 } > [17179571.100000] 3. Memory at 0xfffffffffed08000 [8] { 1, 0x0, 0x095, 0x00009 } > [17179571.108000] 4. Astro BC Runway Port at 0xfffffffffed00000 [0] { 12, 0x0, 0x582, 0x0000b } > [17179571.112000] 5. Elroy PCI Bridge at 0xfffffffffed30000 [0/0] { 13, 0x0, 0x782, 0x0000a } > [17179571.188000] 6. Elroy PCI Bridge at 0xfffffffffed32000 [0/1] { 13, 0x0, 0x782, 0x0000a } > [17179571.196000] 7. Elroy PCI Bridge at 0xfffffffffed34000 [0/2] { 13, 0x0, 0x782, 0x0000a } > [17179571.204000] 8. Elroy PCI Bridge at 0xfffffffffed36000 [0/3] { 13, 0x0, 0x782, 0x0000a } > [17179571.212000] 9. Elroy PCI Bridge at 0xfffffffffed38000 [0/4] { 13, 0x0, 0x782, 0x0000a } > [17179571.220000] 10. Elroy PCI Bridge at 0xfffffffffed3a000 [0/5] { > ********** VIRTUAL FRONT PANEL ********** > System Boot detected > ***************************************** > LEDs: RUN ATTENTION FAULT REMOTE POWER > ON FLASH OFF ON ON > LED State: There was a system interruption that did not take the system down. > Check Chassis and Console Logs for error messages. > > processor system initialization 1C00 > > ***************************************** > > ************ EARLY BOOT VFP ************* > End of early boot detected > ***************************************** > [17179572.312000] powersw: Soft power switch support not available. > [17179572.328000] bio: create slab at 0 > [17179572.480000] NET: Registered protocol family 2 > [17179572.540000] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) > [17179572.552000] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) > [17179572.624000] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) > [17179572.748000] TCP: Hash tables configured (established 262144 bind 65536) > [17179572.756000] TCP reno registered > [17179572.768000] NET: Registered protocol family 1 > [17179572.880000] checking if image is initramfs... it is > [17179576.376000] Freeing initrd memory: 7703k freed > [17179576.384000] Chassis warnings not supported. > [17179576.392000] Performance monitoring counters enabled for Rhapsody DC- 440 > [17179576.404000] audit: initializing netlink socket (disabled) > [17179576.416000] type=2000 audit(1248974998.722:1): initialized > [17179576.428000] VFS: Disk quotas dquot_6.5.2 > [17179576.436000] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) > [17179576.460000] msgmni has been set to 6023 > [17179576.468000] alg: No test for stdrng (krng) > [17179576.476000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) > [17179576.488000] io scheduler noop registered > [17179576.492000] io scheduler anticipatory registered > [17179576.496000] io scheduler deadline registered > [17179576.500000] io scheduler cfq registered (default) > [17179576.604000] PDC Stable Storage facility v0.30 > [17179577.424000] STI GSC/PCI core graphics driver Version 0.9a > [17179577.456000] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled > [17179577.464000] serial 0000:00:04.0: enabling device (0146 -> 0147) > [17179577.476000] 0000:00:04.0: ttyS0 at MMIO 0xfffffffff8000000 (irq = 70) is a 16550A > [17179577.484000] console handover: boot [ttyB0] -> real [ttyS0] > [17179577.500000] 0000:00:04.0: ttyS1 at MMIO 0xfffffffff8000008 (irq = 70) is a 16550A > [17179577.524000] 0000:00:04.0: ttyS2 at MMIO 0xfffffffff8000010 (irq = 70) is a 16550A > [17179577.536000] serial 0000:00:05.0: enabling device (0000 -> 0003) > [17179577.548000] serial 0000:00:05.0: enabling SERR and PARITY (0003 -> 0143) > [17179577.564000] 0000:00:05.0: ttyS3 at MMIO 0xfffffffff8005000 (irq = 71) is a 16550A > [17179577.576000] Couldn't register serial port 0000:00:05.0: -28 > [17179577.680000] brd: module loaded > [17179577.804000] mice: PS/2 mouse device common for all mice > [17179577.816000] rtc-parisc rtc-parisc: rtc core: registered rtc-parisc as rtc0 > [17179577.828000] TCP cubic registered > [17179577.944000] NET: Registered protocol family 17 > [17179577.956000] registered taskstats version 1 > [17179578.088000] rtc-parisc rtc-parisc: setting system clock to 2009-07-30 17:30:00 UTC (1248975000) > [17179578.100000] Freeing unused kernel memory: <0>------------[ cut here ]------------ > [17179578.236000] Badness at /build/buildd/linux-2.6-2.6.29/debian/build/source_hppa_none/kernel/smp.c:329 > [17179578.372000] > [17179578.372000] YZrvWESTHLNXBCVMcbcbcbcbOGFRQPDI > [17179578.376000] PSW: 00001000000001100000000000001110 Not tainted > [17179578.512000] r00-03 000000000806000e 00000000406829c0 0000000040181194 0000000040590020 > [17179578.652000] r04-07 00000000406791c0 000000004065e6a0 0000000000000000 00000000404fdfa0 > [17179578.660000] r08-11 000000004065e6a0 0000000000000000 00000000406841c0 0000000000000001 > [17179578.668000] r12-15 000000004067a9c0 0000000000000000 00000000406791c0 00000000000000ff > [17179578.676000] r16-19 00000000406809c0 00000000406879c0 00000000ff83a268 000000004[17179579.072000] r20-23 0000000000000000 00000000406da000 fffffffffffffffe 0000000000000001 > [17179579.084000] r24-27 0000000000000000 000000004065e6a0 00000000404fdfa0 00000000406791c0 > [17179579.092000] r28-31 000000000800000e 00000000ff8404a0 00000000ff840590 0000000000000000 > [17179579.100000] sr00-03 0000000000000000 0000000000000000 0000000000000000 0000000000000000 > [17179579.108000] sr04-07 0000000000000000 0000000000000000 000000000000000 > [17179579.640000] > [17179579.644000] IASQ: 0000000000000000 0000000000000000 IAOQ: 0000000040180e34 0000000040180e38 > [17179579.652000] IIR: 03ffe01f ISR: 0000000010340000 IOR: 000002fe10040510 > [17179579.660000] CPU: 0 CR30: 00000000ff840000 CR31: ffffffffffffffff > [17179579.668000] ORIG_R28: 000000000800000e > [17179579.672000] IAOQ[0]: smp_call_function_many+0x44/0x368 > [17179579.920000] IAOQ[1]: smp_call_function_many+0x48/0x368 > [17179579.928000] RP(r2): smp_call_function+0x3c/0x50 > [17179579.932000] Backtrace: > [17179579.932000] [<0000000040181194>] smp_call_function+0x3c/0x50 > [17179579.940000000401a1504>] call_rcu+0x44/0x58 > [17179580.344000] > [17179580.352000] ------------[ cut here ]------------ > [17179580.360000] Badness at /build/buildd/linux-2.6-2.6.29/debian/build/source_hppa_none/kernel/smp.c:226 > [17179580.368000] > [17179580.368000] YZrvWESTHLNXBCVMcbcbcbcbOGFRQPDI > [17179580.376000] PSW: 00001000000001101111111000001110 Tainted: G W > [17179580.380000] r00-03 000000ff0806fe0e 000000004067e1c0 0000000040180f1c 0000000000000000 > [17179580.388000] r04-07 00000000406791c0 00000000065e6a0 0000000000000000 > [17179580.908000] r08-11 000000004065e6a0 0000000000000000 00000000406841c0 0000000000000001 > [17179580.920000] r12-15 000000004067a9c0 0000000000000000 00000000406791c0 00000000000000ff > [17179580.928000] r16-19 00000000406809c0 00000000406879c0 00000000ff83a268 0000000000000008 > [17179580.936000] r20-23 00000000404fdfa0 0000000000000002 fffffffffffffffe 0000000000000001 > [17179580.944000] r24-27 0000000000000000 000000004065e6a0 0000000000000001 0000000041.340000] r28-31 000000000800000e 00000000ff840560 00000000ff840660 0000000000000008 > [17179581.476000] sr00-03 0000000000000000 0000000000000000 0000000000000000 0000000000000000 > [17179581.492000] sr04-07 0000000000000000 0000000000000000 0000000000000000 0000000000000000 > [17179581.500000] > [17179581.500000] IASQ: 0000000000000000 0000000000000000 IAOQ: 0000000040180cd0 0000000040180cd4 > [17179581.508000] IIR: 03ffe01f ISR: 0000000010340000 IOR: 000002fe100405e0 > [17179581.512000] CPU: 0 CR30: 00000000ff840000 CR31: fffffffff81.908000] ORIG_R28: 0000000000000001 > [17179582.036000] IA > ********** VIRTUAL FRONT PANEL ********** > System Boot detected > ***************************************** > LEDs: RUN ATTENTION FAULT REMOTE POWER > ON FLASH OFF ON ON > LED State: There was a system interruption that did not take the system down. > Check Chassis and Console Logs for error messages. > > processor system initialization 1C00 > > ***************************************** > > ************ EARLY BOOT VFP ************* > End of early boot detected > ***************************************** > Begin: Loading essential drivers ... WARNING: All config files need .conf: /etc/modprobe.d/pnp-hotplug, it will be ignored in a future release. > WARNING: All config files need .conf: /etc/modprobe.d/display_class, it will be ignored in a future release. > WARNING: All config files need .conf: /etc/modprobe.d/blacklist, it will be ignored in a future release. > [17179583.088000] SCSI subsystem initialized > WARNING: All config files need .conf: /etc/modprobe.d/pnp-hotplug, it will be ignored in a future release. > WARNING: All config files need .conf: /etc/modprobe.d/display_class, it will be ignored in a future release. > WARNING: All config files need .conf: /etc/modprobe.d/blacklist, it will be ignored in a future release. > WARNING: All config files need .conf: /etc/modprobe.d/pnp-hotplug, it will be ignored in a future release. > WARNING: All config files need .conf: /etc/modprobe.d/display_class, it will be ignored in a future release. > WARNING: All config files need .conf: /etc/modprobe.d/blacklist, it will be ignored in a future release. > done. > Begin: Running /scripts/init-premount ... [17179583.856000] Linux Tulip driver version 1.1.15-NAPI (Feb 27, 2007) > [17179584.008000] tulip 0000:00:00.0: enabling device (0140 -> 0143) > [17179584.028000] tulip0: no phy info, aborting mtable build > [17179584.140000] tulip0: MII transceiver #1 config 1000 status 782d advertising 0061. > [17179584.164000] eth0: Digital DS21142/43 Tulip rev 65 at MMIO 0xfffffffff8006000, 00:10:83:fe:9c:b0, IRQ 66. > [17179584.428000] tulip 0000:18:00.0: enabling device (0000 -> 0003) > [17179584.436000] tulip 0000:18:00.0: enabling SERR and PARITY (0003 -> 0143) > > ************* SYSTEM ALERT ************** > SYSTEM NAME: scaspdb24 > DATE: 07/30/2009 TIME: 17:30:06 > ALERT LEVEL: 7 = reserved > > REASON FOR ALERT > SOURCE: 0 = unknown, no source stated > SOURCE DETAIL: 0 = unknown, no source stated SOURCE ID: FF > PROBLEM DETAIL: 0 = no problem detail > > LEDs: RUN ATTENTION FAULT REMOTE POWER > ON FLASH OFF ON ON > LED State: There was a system interruption that did not take the system down. > Check Chassis and Console Logs for error messages. > > 0x0000007000FF6292 000000F0 F0000000 - type 0 = Data Field Unused > 0x5800087000FF6292 00006D06 1E111E06 - type 11 = Timestamp 07/30/2009 17:30:06 > A: ack read of this entry - X: Disable all future alert messages > Anything else skip redisplay the log entry > ->Choice:a > ***************************************** > > > Leaving Console Mode - you may lose write access. > When Console Mode returns, type ^Ecf to get console write access. > > Service Processor login: > Service Processor password: > > > > > Hewlett-Packard Guardian Service Processor > > > 9000/800/L1000-44 System Name: scaspdb24 > > > GSP Host Name: scaspdb24 > GSP> r ser pim > > Unknown Command > > > GSP Host Name: scaspdb24 > GSP> rs > > > RS > > Execution of this command irrecoverably halts all system processing and > I/O activity and restarts the computer system. > > Type Y to confirm your intention to restart the system: (Y/[N]) y > y > -> SPU hardware was successfully issued a reset. > > > GSP Host Name: scaspdb24 > GSP> > ********** VIRTUAL FRONT PANEL ********** > System Boot detected > ***************************************** > LEDs: RUN ATTENTION FAULT REMOTE POWER > FLASH FLASH FLASH ON ON > LED State: Unexpected Reboot. Running non-OS code. Non-critical error detected. > Check Chassis and Console Logs for error messages. > > platform config 626F > processor slave rendezvous 1C17 > processor test 1142 > processor test 1100 > processor test 1100 > processor test 1100 > processor test 1100 > processor test 1100 > processor test 1100 > processor test 1100 > processor test 1100 > processor test 1100 > PDH config 322F > PDH test 3149 > PDH test 3160 > platform test 616A > processor test 1146 > processor INIT 1701 > processor INIT 1701 > processor test 1110 > processor test 1110 > processor test 1110 > processor INIT 1701 > processor test 1110 > processor INIT 1701 > processor test 1110 > processor test 1110 > processor slave rendezvous 1C17 > processor test 1142 > processor slave rendezvous 1C10 > processor test 1142 > PDH test 3158 > PDH test 3157 > PDH test 316E > PDH test 316E > PDH test 316E > PDH test 316E > PDH test 316E > PDH test 316E > PDH test 316E > memory config 7210 > memory INIT 7702 > memory INIT 771D > memory test 7150 > memory config 7213 > memory config 7213 > memory config 7214 > memory config 7213 > memory config 7213 > memory config 7214 > memory config 7213 > memory config 7213 > memory config 7214 > memory config 7213 > memory config 7213 > memory config 7214 > memory config 7213 > memory config 7213 > memory config 7214 > memory config 7213 > memory config 7213 > memory config 7214 > memory config 7213 > memory config 7213 > memory config 7214 > memory config 7213 > memory config 7213 > memory config 7214 > memory config 7213 > memory config 7213 > memory config 7215 > memory config 7216 > memory config 72A0 > memory test 71A1 > memory test 71A2 > memory test 71A4 > memory test 71A5 > memory test 71A6 > memory test 71A3 > memory test 71A4 > memory test 71A4 > memory test 71A5 > memory test 71A5 > memory test 71A6 > memory test 71A6 > memory config 7217 > memory config 7218 > memory config 72A0 > memory test 71A1 > memory test 71A2 > memory test 71A4 > memory test 71A5 > memory test 71A6 > memory test 71A3 > memory test 71A4 > memory test 71A4 > memory test 71A5 > memory test 71A5 > memory test 71A6 > memory test 71A6 > memory config 7210 > I/O INIT 8701 > I/O test 8118 > I/O test 8118 > I/O INIT 8701 > I/O INIT 8701 > I/O INIT 8701 > I/O INIT 8701 > I/O INIT 8701 > I/O INIT 8701 > I/O INIT 8701 > I/O INIT 8701 > I/O INIT 8701 > memory config 7240 > memory INIT 7702 > memory config 7241 > memory config 7243 > memory config 72A0 > memory test 71A1 > memory test 71A2 > memory test 71A4 > memory test 71A5 > memory test 71A6 > memory test 71A3 > memory test 71A4 > memory test 71A4 > memory test 71A4 > memory test 71A4 > memory test 71A4 > memory test 71A4 > memory test 71A4 > memory test 71A4 > memory test 71A4 > memory test 71A4 > memory test 71A4 > memory test 71A4 > memory test 71A4 > memory test 71A5 > memory test 71A5 > memory test 71A5 > memory test 71A5 > memory test 71A5 > memory test 71A5 > memory test 71A5 > memory test 71A5 > memory test 71A5 > memory test 71A5 > memory test 71A5 > memory test 71A5 > memory test 71A5 > memory test 71A6 > memory test 71A6 > memory test 71A6 > memory test 71A6 > memory test 71A6 > memory test 71A6 > memory test 71A6 > memory test 71A6 > memory test 71A6 > memory test 71A6 > memory test 71A6 > memory test 71A6 > memory test 71A6 > memory INIT 7745 > memory config 7240 > I/O config 8204 > I/O config 8204 > I/O test 8119 > I/O test 8119 > I/O test 8119 > I/O test 8119 > I/O test 8119 > I/O test 8119 > I/O test 8119 > I/O test 8119 > I/O test 8119 > I/O test 8119 > I/O config 8204 > processor test 1120 > processor test 1120 > processor INIT 1701 > processor test 1120 > processor test 1120 > processor test 1120 > processor INIT 1701 > processor test 1120 > processor slave rendezvous 1C40 > processor test 1142 > platform test 612A > I/O config 8238 > > ***************************************** > > ************ EARLY BOOT VFP ************* > End of early boot detected > ***************************************** > > Firmware Version 44.28 > > Duplex Console IO Dependent Code (IODC) revision 1 > > ------------------------------------------------------------------------------ > (c) Copyright 1995-2002, Hewlett-Packard Company, All rights reserved > ------------------------------------------------------------------------------ > > Processor Speed State CoProcessor State Cache Size > Number State Inst Data > --------- -------- --------------------- ----------------- ------------ > 0 440 MHz Active Functional 512 KB 1 MB > 3 440 MHz Idle Functional 512 KB 1 MB > > Central Bus Speed (in MHz) : 82 > Available Memory : 3145728 KB > Good Memory Required : 22096 KB > > Primary boot path: 0/0/1/1.0 > Alternate boot path: 0/7/0/0.97.20.19.0.0.5 > Console path: 0/0/4/0.0 > Keyboard path: 0/0/4/0.0 > > > ---- Main Menu --------------------------------------------------------------- > > Command Description > ------- ----------- > BOot [PRI|ALT|] Boot from specified path > PAth [PRI|ALT] [] Display or modify a path > SEArch [DIsplay|IPL] [] Search for boot devices > > COnfiguration menu Displays or sets boot values > INformation menu Displays hardware information > SERvice menu Displays service commands > > DIsplay Redisplay the current menu > HElp [|] Display help for menu or command > RESET Restart the system > ---- > Main Menu: Enter command or menu > ser pim > > > PROCESSOR PIM INFORMATION > > Original Product Number: A5576A > Current Product Number: A5576A > > > ----------------- Processor 0 HPMC Information - PDC Version: 44.28 ------ > > Timestamp = Thu Jul 30 17:30:07 GMT 2009 (20:09:07:30:17:30:07) > > HPMC Chassis Codes > > Chassis Code Extension > ------------ --------- > 0x0000082000ff6242 0x0000000000000000 > 0x1800082011006312 0xcb81000000000000 > 0x0000087000ff6292 0x000000f0f0000000 > 0x6000082070006062 0x0000000000100010 > 0x7000082070006082 0x0000000000b92400 > 0x7000082379006133 0xc1bff0fffed08040 > 0x0000080080006310 0x0000000000000001 > 0x000008008000631f 0x0000000000000000 > > > General Registers 0 - 31 > 00-03 0000000000000000 00000000402e7098 000000000c1b5c78 000000007f954680 > 04-07 000000000c1b1000 000000000c1fc800 000000000c1c79b0 000000007f954000 > 08-11 000000000c1fc830 0000000000000003 00000000fe87e800 000000000c1fc800 > 12-15 0000000000000000 00000000fb6a2d5e 00000000fb6a2b5e 0000000000000003 > 16-19 0000000000026420 0000000000000000 00000000fe87e880 000000007f9555b8 > 20-23 0000000000000000 000000007f9552c0 ffffffffc0000000 0000000000100000 > 24-27 0000000000000000 0000000000000000 000000000c1fc830 00000000406791c0 > 28-31 000000000c1b4010 000000007f858be0 000000007f858c90 000000000c1b3fd0 > > > Control Registers 0 - 31 > 00-03 0000000000000000 0000000000000000 0000000000000000 0000000000000000 > 04-07 0000000000000000 0000000000000000 0000000000000000 0000000000000000 > 08-11 000000000000011c 0000000000000000 00000000000000c0 0000000000000001 > 12-15 0000000000000000 0000000000000000 0000000000103000 ff80000000000000 > 16-19 0000003aeb5d81e1 0000000000000000 00000000402e70d0 000000000f40109c > 20-23 00000000a627ff41 000000004fdfc830 000000ff0804ff0f 8000000000000000 > 24-27 0000000000586000 000000003f892000 ffffffffffffffff 0000000040001480 > 28-31 ffffffffffffffff ffffffffffffff2f 000000007f858000 ffffffffffffffff > > Space Registers 0 - 7 > 00-03 0004d800 00000000 00000000 00047000 > 04-07 00000000 00000000 00000000 00000000 > > > IIA Space (back entry) = 0x0000000000000000 > IIA Offset (back entry) = 0x00000000402e70d4 > Check Type = 0x20000000 > CPU State = 0x9e000004 > Cache Check = 0x00000000 > TLB Check = 0x00000000 > Bus Check = 0x0030103b > Assists Check = 0x00000000 > Assist State = 0x00000000 > Path Info = 0x00000000 > System Responder Address = 0x000000ffd053f830 > System Requestor Address = 0xfffffffffffa0000 > > > Floating Point Registers 0 - 31 > 00-03 0000000000000000 0000000000000000 0000000000000000 0000000000000000 > 04-07 0000000000000000 00000000bf840350 00000000bf840358 0000000000000008 > 08-11 000000004020b518 00000000ff83a268 0000000000000000 0000000000000002 > 12-15 00000000ff83fc10 00000000ff8403f0 00000000ff83fc00 00000000406791c0 > 16-19 0000000000000002 00000000ff83a268 00000000406879c0 00000000406809c0 > 20-23 00000000000000ff 00000000406791c0 0000000000000000 0000000000000000 > 24-27 0000000000000000 0000000000000000 fffffffffffff000 00000000fefa6000 > 28-31 0000000000000000 0000000000000000 ffffffffffffff9c 00000000406791c0 > > > Check Summary = 0xcb81000000000000 > Available Memory = 0x00000000c0000000 > CPU Diagnose Register 2 = 0x0203000100802004 > CPU Status Register 0 = 0x2440c24000000000 > CPU Status Register 1 = 0x8002000000000000 > SADD LOG = 0x147ffcffffffffff > Read Short LOG = 0xc1af00ffd053f830 > > > > ----------------- Processor 0 LPMC Information ------------------ > > Check Type = 0x00000000 > IC Parity Info = 0x00000000 > Cache Check = 0x00000000 > TLB Check = 0x00000000 > Bus Check = 0x00000000 > Assists Check = 0x00000000 > Assist State = 0x00000000 > Path Info = 0x00000000 > System Responder Address = 0x0000000000000000 > System Requestor Address = 0x0000000000000000 > > > > ----------------- Processor 0 TOC Information ------------------- > > General Registers 0 - 31 > 00-03 0000000000000000 0000000000000000 0000000000000000 0000000000000000 > 04-07 0000000000000000 0000000000000000 0000000000000000 0000000000000000 > 08-11 0000000000000000 0000000000000000 0000000000000000 0000000000000000 > 12-15 0000000000000000 0000000000000000 0000000000000000 0000000000000000 > 16-19 0000000000000000 0000000000000000 0000000000000000 0000000000000000 > 20-23 0000000000000000 0000000000000000 0000000000000000 0000000000000000 > 24-27 0000000000000000 0000000000000000 0000000000000000 0000000000000000 > 28-31 0000000000000000 0000000000000000 0000000000000000 0000000000000000 > > > Control Registers 0 - 31 > 00-03 0000000000000000 0000000000000000 0000000000000000 0000000000000000 > 04-07 0000000000000000 0000000000000000 0000000000000000 0000000000000000 > 08-11 0000000000000000 0000000000000000 0000000000000000 0000000000000000 > 12-15 0000000000000000 0000000000000000 0000000000000000 0000000000000000 > 16-19 0000000000000000 0000000000000000 0000000000000000 0000000000000000 > 20-23 0000000000000000 0000000000000000 0000000000000000 0000000000000000 > 24-27 0000000000000000 0000000000000000 0000000000000000 0000000000000000 > 28-31 0000000000000000 0000000000000000 0000000000000000 0000000000000000 > > Space Registers 0 - 7 > 00-03 00000000 00000000 00000000 00000000 > 04-07 00000000 00000000 00000000 00000000 > > IIA Space (back entry) = 0x0000000000000000 > IIA Offset (back entry) = 0x0000000000000000 > CPU State = 0x00000000 > > > > ----------------- Processor 3 HPMC Information - PDC Version: 44.28 ------ > > Timestamp = Thu Jul 30 17:30:07 GMT 2009 (20:09:07:30:17:30:07) > > HPMC Chassis Codes > > Chassis Code Extension > ------------ --------- > 0x0000082000ff6242 0x0000000000000000 > 0x1800082011036322 0xcb81800000000000 > > > General Registers 0 - 31 > 00-03 0000000000000000 000000004067a9c0 000000004011c18c 0000000043541518 > 04-07 00000000406791c0 00000000fc985000 000000007f93f000 0000000000000000 > 08-11 00000000fca67918 000000007f8d9cc0 00000000404eb740 0000000040000000 > 12-15 0000000000000000 0000000000000200 0000000040311427 0000000000000000 > 16-19 00000000419e85c8 000000007f93f888 0000000000000000 0000000000000000 > 20-23 000000000003f93f 00000000fffffffa 0000000000000000 0000000000000040 > 24-27 0000000000000010 00000000fc985fc0 000000004050a000 00000000406791c0 > 28-31 0000000000000001 000000007f94c800 000000007f94c830 00000000005282a3 > > > Control Registers 0 - 31 > 00-03 0000000000000000 0000000000000000 0000000000000000 0000000000000000 > 04-07 0000000000000000 0000000000000000 0000000000000000 0000000000000000 > 08-11 0000000000000146 0000000000000000 00000000000000c0 0000000000000000 > 12-15 0000000000000000 0000000000000000 0000000000103000 ff80000000000000 > 16-19 0000003aeb5d7f36 0000000000000000 000000004011c190 0000000004a01200 > 20-23 0000000000000000 00000000fc985000 000000ff0804f90f 8000000000000000 > 24-27 0000000000586000 000000003f952000 fffffffff37f7f00 0000000040001b60 > 28-31 fffffffff37f7f00 fffffffff37f7f00 000000007f94c000 fffffffff37f7f00 > > Space Registers 0 - 7 > 00-03 00051800 00000000 00000000 00051800 > 04-07 00000000 00000000 00000000 00000000 > > > IIA Space (back entry) = 0x0000000000000000 > IIA Offset (back entry) = 0x000000004011c194 > Check Type = 0x20000000 > CPU State = 0x9e000004 > Cache Check = 0x00000000 > TLB Check = 0x00000000 > Bus Check = 0x0030000d > Assists Check = 0x00000000 > Assist State = 0x00000000 > Path Info = 0x00000000 > System Responder Address = 0xfffffffffffa6000 > System Requestor Address = 0xfffffffffffa0000 > > > Floating Point Registers 0 - 31 > 00-03 0000000000000000 0000000000000000 0000000000000000 0000000000000000 > 04-07 0000000000000000 00000000bf840350 00000000bf840358 0000000000000008 > 08-11 000000004020b518 00000000ff83a268 0000000000000000 0000000000000002 > 12-15 00000000ff83fc10 00000000ff8403f0 00000000ff83fc00 00000000406791c0 > 16-19 0000000000000002 00000000ff83a268 00000000406879c0 00000000406809c0 > 20-23 00000000000000ff 00000000406791c0 0000000000000000 0000000a4067a9c0 > 24-27 0000000000000000 00000000406841c0 fffffffffffff000 00000000fefa6000 > 28-31 0000000000000000 0000000000000000 ffffffffffffff9c 00000000406791c0 > > > Check Summary = 0xcb81800000000000 > Available Memory = 0x00000000c0000000 > CPU Diagnose Register 2 = 0x0203030100802004 > CPU Status Register 0 = 0x3440c24000000000 > CPU Status Register 1 = 0x8000000000000000 > SADD LOG = 0x4800000000000000 > Read Short LOG = 0xc13ff0f0f0047218 > > > > ----------------- Processor 3 LPMC Information ------------------ > > Check Type = 0x00000000 > IC Parity Info = 0x00000000 > Cache Check = 0x00000000 > TLB Check = 0x00000000 > Bus Check = 0x00000000 > Assists Check = 0x00000000 > Assist State = 0x00000000 > Path Info = 0x00000000 > System Responder Address = 0x0000000000000000 > System Requestor Address = 0x0000000000000000 > > > > ----------------- Processor 3 TOC Information ------------------- > > General Registers 0 - 31 > 00-03 0000000000000000 0000000000000000 0000000000000000 0000000000000000 > 04-07 0000000000000000 0000000000000000 0000000000000000 0000000000000000 > 08-11 0000000000000000 0000000000000000 0000000000000000 0000000000000000 > 12-15 0000000000000000 0000000000000000 0000000000000000 0000000000000000 > 16-19 0000000000000000 0000000000000000 0000000000000000 0000000000000000 > 20-23 0000000000000000 0000000000000000 0000000000000000 0000000000000000 > 24-27 0000000000000000 0000000000000000 0000000000000000 0000000000000000 > 28-31 0000000000000000 0000000000000000 0000000000000000 0000000000000000 > > > Control Registers 0 - 31 > 00-03 0000000000000000 0000000000000000 0000000000000000 0000000000000000 > 04-07 0000000000000000 0000000000000000 0000000000000000 0000000000000000 > 08-11 0000000000000000 0000000000000000 0000000000000000 0000000000000000 > 12-15 0000000000000000 0000000000000000 0000000000000000 0000000000000000 > 16-19 0000000000000000 0000000000000000 0000000000000000 0000000000000000 > 20-23 0000000000000000 0000000000000000 0000000000000000 0000000000000000 > 24-27 0000000000000000 0000000000000000 0000000000000000 0000000000000000 > 28-31 0000000000000000 0000000000000000 0000000000000000 0000000000000000 > > Space Registers 0 - 7 > 00-03 00000000 00000000 00000000 00000000 > 04-07 00000000 00000000 00000000 00000000 > > IIA Space (back entry) = 0x0000000000000000 > IIA Offset (back entry) = 0x0000000000000000 > CPU State = 0x00000000 > > > -------------- Memory Error Log Information -------------- > > Bus 0 Log Information > > Timestamp = Thu Jul 30 17:30:07 GMT 2009 (20:09:07:30:17:30:07) > > OV RQ RS ESTAT A C D corr unc fe cw pf > -- -- -- ----- - - - ---- --- -- -- -- > X X ERR_ERROR X X > > Bus Requestor Address = 0xfffffffffffa0000 > Bus Target Address = 0x0000000000000000 > Bus Responder Address = 0xfffffffffed00000 > > Error Status Reg = 0x0000000000100010 > Runway Control Reg = 0x0000021c00001418 > Runway Address Reg = 0xc1bff0fffed08040 > Runway Data High Reg = 0xe840c000083c025c > Runway Data Low Reg = 0xe840c000083c025c > Memory Address Reg = 0x000001ff3fffffff > Memory Address Corr Reg = 0x000001ff3fffffff > Memory Syndrome Reg = 0x0000000000000000 > Memory Syndrome Corr Reg = 0x0000000000000000 > > > > Address/Control Parity Error Registers > > Address/Control Parity Error Bit (mem_addr_par_stat) Not Set > > > > ------------ I/O Module Error Log Information ------------ > > > No I/O module errors logged > > > Main Menu: Enter command or menu > >