From: John David Anglin <dave.anglin@bell.net>
To: Helge Deller <deller@gmx.de>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>,
Vincent <vincent.stehle@laposte.net>,
Rolf Eike Beer <eike-kernel@sf-tec.de>,
linux-parisc@vger.kernel.org
Subject: Re: Issue booting v2.6.39 .. v3.4-rc6 on hp712/100
Date: Tue, 15 May 2012 16:05:47 -0400 [thread overview]
Message-ID: <4FB2B71B.7090602@bell.net> (raw)
In-Reply-To: <4FB2B5B1.7000604@gmx.de>
On 5/15/2012 3:59 PM, Helge Deller wrote:
> On 05/15/2012 09:46 PM, John David Anglin wrote:
>> On 5/15/2012 3:24 PM, John David Anglin wrote:
>>> James patch now let my 715/64 boot, but still crashes on my B160L:
>>>>
>>>> swapper (pid 1): Illegal instruction (code 8)
>>>>
>>>> YZrvWESTHLNXBCVMcbcbcbcbOGFRQPDI
>>>> PSW: 00000000000001001110000100001111 Not tainted
>>>> r00-03 0004e10f 00000020 101198cc 17c245c0
>>>> r04-07 ffeff000 17ec05f8 007d4000 17e60260
>>>> r08-11 17c5100b fffff000 17e60310 00020000
>>>> r12-15 00000ffc 0000000b 00000000 ffeff000
>>>> r16-19 007d4000 10768020 10000000 17c22db8
>>>> r20-23 17c245c8 108fc000 00000001 00000020
>>>> r24-27 000007d4 0f2fffe0 0000fa80 106e2020
>>>> r28-31 0f2ff000 000074ee 17c24640 000072e6
>>>> sr00-03 00000000 00000001 00000000 00000000
>>>> sr04-07 00000000 00000000 00000000 00000000
>>>>
>>>> IASQ: 00000000 00000000 IAOQ: 1010118c 10101190
>>>> IIR: 078113e0 ISR: 00000000 IOR: 0f2ff000
>>>> CPU: 0 CR30: 17c24000 CR31: f0102978
>>>> ORIG_R28: 17ebbe40
>>>> IAOQ[0]: flush_icache_page_asm+0x28/0x7c
>>>> IAOQ[1]: flush_icache_page_asm+0x2c/0x7c
>>>> RP(r2): flush_cache_page+0x90/0xb0
>>>> Backtrace:
>>> This one is in a different place: flush_icache_page_asm. It has
>>> crashed on the first fic,m instruction. Again it is an illegal
>>> instruction.
>>>
>> Looking at the PA 1.1 arch, I see that the space register needs to be
>> explicitly specified on PA 1.1 (format 26). The implicit (format 24)
>> instruction was added in PA 2.0.
>>
>> Could you try adding %sr0 to the fic instructions?
> no illegal instruction any longer, but "bad address"....
> I changed all to " fic,m %r1(%sr0,%r28)"
>
>
>
> Freeing unused kernel memory: 320k freed
> Backtrace:
> [<101198cc>] flush_cache_page+0x90/0xb0
> [<101b9b84>] do_wp_page+0x1e0/0x7b4
> [<101bb970>] handle_pte_fault+0x284/0x7c0
> [<101bbf74>] handle_mm_fault+0xc8/0x120
> [<10118cc8>] do_page_fault+0x228/0x2d0
> [<1011a838>] handle_interruption+0x1d4/0x6c4
> [<10105078>] intr_check_sig+0x0/0x34
>
>
> Bad Address (null pointer deref?): Code=17 regs=17c244c0 (Addr=0f17d000)
>
> YZrvWESTHLNXBCVMcbcbcbcbOGFRQPDI
> PSW: 00000000000001001111100100001111 Not tainted
> r00-03 0004f90f 00000020 101198cc 17c24440
> r04-07 4017d4c4 17ebf498 007cd000 007cdb05
> r08-11 17ebee40 17ec55f4 107eb7c0 10768020
> r12-15 000007cd 17ebee74 000005f4 00050000
> r16-19 17c23098 17c24140 0011849c 17c22db8
> r20-23 0000004b 108fc000 00000000 00000000
> r24-27 000007cd 0f17dfe0 0000f9a0 106e2020
> r28-31 0f17d000 17c23098 17c244c0 6fffffff
> sr00-03 00000800 00000001 00000000 00000001
> sr04-07 00000000 00000000 00000000 00000000
>
> IASQ: 00000000 00000000 IAOQ: 1010118c 10101190
> IIR: 078102a0 ISR: 00000800 IOR: 0f17d000
> CPU: 0 CR30: 17c24000 CR31: f0102978
> ORIG_R28: 17c51000
> IAOQ[0]: flush_icache_page_asm+0x28/0x7c
> IAOQ[1]: flush_icache_page_asm+0x2c/0x7c
> RP(r2): flush_cache_page+0x90/0xb0
> Backtrace:
> [<101198cc>] flush_cache_page+0x90/0xb0
> [<101b9b84>] do_wp_page+0x1e0/0x7b4
> [<101bb970>] handle_pte_fault+0x284/0x7c0
> [<101bbf74>] handle_mm_fault+0xc8/0x120
> [<10118cc8>] do_page_fault+0x228/0x2d0
> [<1011a838>] handle_interruption+0x1d4/0x6c4
> [<10105078>] intr_check_sig+0x0/0x34
>
>
>
>
Try %sr2 or %sr4. %sr0 isn't zero.
Dave
--
John David Anglin dave.anglin@bell.net
next prev parent reply other threads:[~2012-05-15 20:05 UTC|newest]
Thread overview: 56+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-05-08 21:59 Issue booting v2.6.39 .. v3.4-rc6 on hp712/100 Vincent
2012-05-09 6:53 ` Rolf Eike Beer
2012-05-09 15:55 ` John David Anglin
2012-05-09 21:14 ` Vincent
2012-05-09 21:33 ` John David Anglin
2012-05-10 2:03 ` John David Anglin
2012-05-10 6:41 ` Rolf Eike Beer
2012-05-10 16:32 ` John David Anglin
2012-05-10 19:32 ` Rolf Eike Beer
2012-05-11 21:17 ` Vincent
2012-05-13 14:32 ` Jeroen Roovers
2012-05-14 0:52 ` John David Anglin
2012-05-12 22:50 ` Helge Deller
2012-05-13 14:11 ` John David Anglin
2012-05-14 1:10 ` John David Anglin
2012-05-14 22:11 ` Helge Deller
2012-05-14 22:38 ` John David Anglin
2012-05-14 22:55 ` John David Anglin
2012-05-15 8:09 ` James Bottomley
2012-05-15 9:13 ` James Bottomley
2012-05-15 18:23 ` John David Anglin
2012-05-15 18:50 ` Helge Deller
2012-05-15 19:24 ` John David Anglin
2012-05-15 19:46 ` John David Anglin
2012-05-15 19:59 ` Helge Deller
2012-05-15 20:05 ` John David Anglin [this message]
2012-05-15 20:28 ` Helge Deller
2012-05-15 20:48 ` John David Anglin
2012-05-16 14:59 ` James Bottomley
2012-05-17 19:26 ` Helge Deller
2012-05-17 19:57 ` Rolf Eike Beer
2012-05-18 8:12 ` James Bottomley
2012-05-18 21:09 ` Helge Deller
2012-05-20 10:01 ` James Bottomley
2012-05-20 19:11 ` Helge Deller
2012-05-20 20:15 ` James Bottomley
2012-05-20 21:09 ` Helge Deller
2012-05-20 21:25 ` John David Anglin
2012-05-21 20:59 ` Helge Deller
2012-05-23 8:47 ` Peter Gantner (nephros)
2012-05-23 23:09 ` John David Anglin
2012-05-15 21:08 ` John David Anglin
2012-05-16 7:27 ` James Bottomley
2012-05-16 9:27 ` James Bottomley
2012-05-16 10:09 ` James Bottomley
2012-05-16 10:49 ` John David Anglin
2012-05-16 10:57 ` James Bottomley
2012-05-16 11:17 ` John David Anglin
2012-05-16 11:57 ` Rolf Eike Beer
2012-05-16 12:24 ` James Bottomley
2012-05-15 19:52 ` James Bottomley
2012-05-15 19:09 ` James Bottomley
2012-05-15 21:01 ` Vincent
2012-05-16 19:07 ` Helge Deller
2012-05-15 8:06 ` James Bottomley
2012-05-09 21:00 ` Vincent
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4FB2B71B.7090602@bell.net \
--to=dave.anglin@bell.net \
--cc=James.Bottomley@HansenPartnership.com \
--cc=deller@gmx.de \
--cc=eike-kernel@sf-tec.de \
--cc=linux-parisc@vger.kernel.org \
--cc=vincent.stehle@laposte.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).