From mboxrd@z Thu Jan 1 00:00:00 1970 From: Keven Tipping Subject: [parisc-linux] Gentoo & PARisc Kernel broken? Date: Thu, 15 Dec 2005 22:58:42 -0700 Message-ID: <912523912e0e.912e0e912523@shaw.ca> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii To: parisc-linux@lists.parisc-linux.org Return-Path: List-Id: parisc-linux developers list List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: parisc-linux-bounces@lists.parisc-linux.org Greetings to all! I have a K370 here, all reasonable attempts to boot it have failed miserably. The only thing that boots is the Gentoo 2005 Live CD and I have no clue why :(. Here is the bootup log. Main Menu: Enter command or menu > ls ---- Main Menu --------------------------------------------------------------- Command Description ------- ----------- BOot [PRI|ALT|] Boot from specified path PAth [PRI|ALT] [] Display or modify a path SEArch [DIsplay|IPL] [] Search for boot devices COnfiguration menu Displays or sets boot values INformation menu Displays hardware information SERvice menu Displays service commands DIsplay Redisplay the current menu HElp [|] Display help for menu or command RESET Restart the system ---- Main Menu: Enter command or menu > bo fwscsi.3 Interact with IPL (Y, N, or Cancel)?> Y Booting... Boot IO Dependent Code (IODC) revision 152 HARD Booted. palo ipl 1.8 root@livecd Wed Dec 14 17:02:54 MST 2005 Partition Start(MB) End(MB) Id Type 1 1 39 f0 Palo 2 40 133 83 ext2 3 134 8707 83 ext2 PALO(F0) partition contains: Information: No console specified on kernel command line. This is normal. PALO will choose the console currently used by firmware (serial).Current command line: 2/vmlinux root=/dev/sda3 console=ttyB0 0: 2/vmlinux 1: root=/dev/sda3 2: console=ttyB0 <#> edit the numbered field 'b' boot with this command line 'r' restore command line 'l' list dir ? b Command line for kernel: 'root=/dev/sda3 console=ttyB0 single palo_kernel=2/vmlinux' Selected kernel: /vmlinux from partition 2 ELF32 executable Entry 00100100 first 00100000 n 3 Segment 0 load 00100000 size 3580800 mediaptr 0x1000 Segment 1 load 0046b000 size 1334164 mediaptr 0x36c000 Segment 2 load 00000000 size 0 mediaptr 0x0 Branching to kernel entry point 0x00100100. If this is the last message you see, you may need to switch your console. This is a common symptom -- search the FAQ and mailing list at parisc-linux.org Linux version 2.6.15-rc5-pa5 (root@livecd) (gcc version 3.3.5 (Gentoo 3.3.5-r1, pie-8.7.7.1)) #1 SMP Thu Dec 15 14:49:24 MST 2005 FP[0] enabled: Rev 0 Model 14 The 32-bit Kernel has started... Initialized PDC Console for debugging. Determining PDC firmware type: System Map. model 00005b10 00000491 00000000 00000000 291a830d 100000f1 00000008 000000b2 000000b2 vers 00000501 CPUID vers 14 rev 23 (0x000001d7) capabilities 0x3 model 9000/898/K370 Total Memory: 2175 MB SMP: bootstrap CPU ID is 0 Built 1 zonelists Kernel command line: root=/dev/sda3 console=ttyB0 single palo_kernel=2/vmlinux PID hash table entries: 4096 (order: 12, 65536 bytes) Console: colour dummy device 160x64 Dentry cache hash table entries: 524288 (order: 9, 2097152 bytes) Inode-cache hash table entries: 262144 (order: 8, 1048576 bytes) Memory: 2228200k available Mount-cache hash table entries: 512 Brought up 1 CPUs NET: Registered protocol family 16 EISA bus registered Searching for devices... Found devices: 1. U2-IOA BC Runway Port at 0xfff8a000 [10] { 12, 0xf, 0x580, 0x0000b } 2. Mohawk Core BA at 0xffd00000 [10/12] { 11, 0x0, 0x044, 0x00081 }, additional addresses: 0xffd0c000 0xffc00000 3. Mohawk Core SCSI at 0xffd06000 [10/12/5] { 10, 0x0, 0x044, 0x00082 } 4. Mohawk Core LAN (802.3) at 0xffd07000 [10/12/6] { 10, 0x0, 0x044, 0x0008a } 5. Mohawk Core Centronics at 0xffd02000 [10/12/0] { 10, 0x0, 0x044, 0x00074 }, additional addresses: 0xffd01000 0xffd03000 6. Mohawk Core PS/2 Port at 0xffd08000 [10/12/7] { 10, 0x0, 0x044, 0x00084 } 7. Mohawk Core PS/2 Port at 0xffd08100 [10/12/8] { 10, 0x0, 0x044, 0x00084 } 8. Mohawk Core FW-SCSI at 0xf1800000 [10/0] { 4, 0x0, 0x044, 0x00089 } 9. Gecko BOA BC GSC+ Port at 0xf1804000 [10/4] { 7, 0x0, 0x500, 0x0000c } 10. Sahp Baat Kiuh AP/MUX at 0xf1900000 [10/4/0] { 5, 0x0, 0x044, 0x0000d } 11. Gecko BOA BC HP-PB Port at 0xf193c000 [10/4/60] { 7, 0x0, 0x103, 0x0000c } 12. HP HSC-PCI Cards at 0xf1808000 [10/8] { 4, 0x0, 0x004, 0x0009d } 13. Gecko BOA BC GSC+ Port at 0xf1810000 [10/16] { 7, 0x0, 0x500, 0x0000c } 14. Gecko BOA BC HP-PB Port at 0xf1a3c000 [10/16/60] { 7, 0x0, 0x103, 0x0000c } 15. U2-IOA BC GSC+ Port at 0xf183f000 [10/63] { 7, 0x1, 0x501, 0x0000c } 16. U2-IOA BC Runway Port at 0xfff88000 [8] { 12, 0xf, 0x580, 0x0000b } 17. Shrike Add-on FW-SCSI at 0xf1008000 [8/8] { 4, 0x1, 0x014, 0x00089 } 18. HP HSC-PCI Cards at 0xf100c000 [8/12] { 4, 0x0, 0x004, 0x0009d } 19. U2-IOA BC GSC+ Port at 0xf103f000 [8/63] { 7, 0x1, 0x501, 0x0000c } 20. BraveHawk 200MHz DC3 (899/K570) at 0xfffa0000 [32] { 0, 0x0, 0x5b1, 0x00004 } 21. BraveHawk 200MHz DC3 (899/K570) at 0xfffa2000 [34] { 0, 0x0, 0x5b1, 0x00004 } 22. BraveHawk 200MHz DC3 (899/K570) at 0xfffa4000 [36] { 0, 0x0, 0x5b1, 0x00004 } 23. BraveHawk 200MHz DC3 (899/K570) at 0xfffa6000 [38] { 0, 0x0, 0x5b1, 0x00004 } 24. BraveHawk 200MHz DC3 (899/K570) at 0xfffac000 [44] { 0, 0x0, 0x5b1, 0x00004 } 25. BraveHawk 200MHz DC3 (899/K570) at 0xfffae000 [46] { 0, 0x0, 0x5b1, 0x00004 } 26. Memory at 0xfffb1000 [49] { 1, 0x0, 0x032, 0x00009 } Releasing cpu 1 now, hpa=fffa2000 FP[1] enabled: Rev 0 Model 14 Releasing cpu 2 now, hpa=fffa4000 FP[2] enabled: Rev 0 Model 14 Releasing cpu 3 now, hpa=fffa6000 FP[3] enabled: Rev 0 Model 14 Releasing cpu 4 now, hpa=fffac000 FP[4] enabled: Rev 0 Model 14 Releasing cpu 5 now, hpa=fffae000 FP[5] enabled: Rev 0 Model 14 CPU(s): 6 x PA8200 (PCX-U+) at 200.000000 MHz Setting cache flush threshold to 140 (6 CPUs online) Found U2 at 0xfff8a000 Found U2 at 0xfff88000 Lasi version 0 at 0xffd00000 found. LED display at ffd0c000 registered Found GeckoBoa at 0xf1804000 Found GeckoBoa at 0xf1810000 Dino version 3.x (card mode) found at 0xf100c000 Dino version 3.x (card mode) found at 0xf1808000 SCSI subsystem initialized usbcore: registered new driver usbfs usbcore: registered new driver hub unwind_init: start = 0x1046cfe0, end = 0x1049a3b0, entries = 11581 Installing knfsd (copyright (C) 1996 okir@monad.swb.de). Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered PDC Stable Storage facility v0.10 Soft power switch support not available. STI GSC/PCI core graphics driver Version 0.9a lp: driver loaded but no devices found Generic RTC Driver v1.07 serio: GSC PS/2 keyboard port at 0xffd08000 irq 19 @ 10:12:7 serio: GSC PS/2 mouse port at 0xffd08100 irq 19 @ 10:12:8 HP SDC: No SDC found. HP SDC MLC: Registering the System Domain Controller's HIL MLC. HP SDC MLC: Request for raw HIL ISR hook denied Serial: 8250/16550 driver $Revision: 1.90 $ 13 ports, IRQ sharing enabled Serial mux driver (8 ports) Revision: 0.3 ttyB0 at MMIO 0xf1900800 (polled) is a Mux ttyB1 at MMIO 0xf1900880 (polled) is a Mux ttyB2 at MMIO 0xf1900900 (polled) is a Mux ttyB3 at MMIO 0xf1900980 (polled) is a Mux ttyB4 at MMIO 0xf1900a00 (polled) is a Mux ttyB5 at MMIO 0xf1900a80 (polled) is a Mux ttyB6 at MMIO 0xf1900b00 (polled) is a Mux ttyB7 at MMIO 0xf1900b80 (polled) is a Mux parport_init_chip: initialize bidirectional-mode. parport0: PC-style at 0xffd02800, irq 18 [PCSPP,TRISTATE] lp0: using parport0 (interrupt-driven). RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize loop: loaded (max 8 devices) zalon_probe: Zalon version 1, IRQ 69 ncr53c720-0: rev 0xf irq 69 ncr53c720-0: ID 7, Fast-10, Parity Checking, Differential scsi0 : ncr53c8xx-3.4.3g zalon_probe: Zalon version 1, IRQ 70 ncr53c720-1: rev 0xf irq 70 ncr53c720-1: ID 7, Fast-10, Parity Checking, Differential scsi1 : ncr53c8xx-3.4.3g Vendor: QUANTUM Model: VIKING II 9.1WLS Rev: 3506 Type: Direct-Access ANSI SCSI revision: 02 target1:0:3: Beginning Domain Validation target1:0:3: asynchronous. target1:0:3: wide asynchronous. target1:0:3: FAST-10 WIDE SCSI 20.0 MB/s ST (100 ns, offset 8) target1:0:3: Domain Validation skipping write tests target1:0:3: Ending Domain Validation Vendor: QUANTUM Model: VIKING II 9.1WLS Rev: 3506 Type: Direct-Access ANSI SCSI revision: 02 target1:0:4: Beginning Domain Validation target1:0:4: asynchronous. target1:0:4: wide asynchronous. target1:0:4: FAST-10 WIDE SCSI 20.0 MB/s ST (100 ns, offset 8) target1:0:4: Domain Validation skipping write tests target1:0:4: Ending Domain Validation Vendor: QUANTUM Model: VIKING II 9.1WLS Rev: 3506 Type: Direct-Access ANSI SCSI revision: 02 target1:0:5: Beginning Domain Validation target1:0:5: asynchronous. target1:0:5: wide asynchronous. target1:0:5: FAST-10 WIDE SCSI 20.0 MB/s ST (100 ns, offset 8) target1:0:5: Domain Validation skipping write tests target1:0:5: Ending Domain Validation Vendor: QUANTUM Model: VIKING II 9.1WLS Rev: 3506 Type: Direct-Access ANSI SCSI revision: 02 target1:0:6: Beginning Domain Validation target1:0:6: asynchronous. target1:0:6: wide asynchronous. target1:0:6: FAST-10 WIDE SCSI 20.0 MB/s ST (100 ns, offset 8) target1:0:6: Domain Validation skipping write tests target1:0:6: Ending Domain Validation 53c700: Version 2.8 By James.Bottomley@HansenPartnership.com scsi2: 53c710 rev 2 scsi2 : LASI SCSI 53c700 Vendor: PIONEER Model: DVD-ROM DVD-303 Rev: 1.06 Type: CD-ROM ANSI SCSI revision: 02 target2:0:2: Beginning Domain Validation target2:0:2: asynchronous. target2:0:2: FAST-10 SCSI 10.0 MB/s ST (100 ns, offset 8) target2:0:2: Domain Validation skipping write tests target2:0:2: Ending Domain Validation Vendor: TOSHIBA Model: CD-ROM XM-5401TA Rev: 3115 Type: CD-ROM ANSI SCSI revision: 02 target2:0:3: Beginning Domain Validation target2:0:3: asynchronous. target2:0:3: FAST-5 SCSI 4.2 MB/s ST (236 ns, offset 8) target2:0:3: Domain Validation skipping write tests target2:0:3: Ending Domain Validation st: Version 20050830, fixed bufsize 32768, s/g segs 256 SCSI device sda: 17836668 512-byte hdwr sectors (9132 MB) SCSI device sda: drive cache: write back SCSI device sda: 17836668 512-byte hdwr sectors (9132 MB) SCSI device sda: drive cache: write back sda: sda1 sda2 sda3 sd 1:0:3:0: Attached scsi disk sda SCSI device sdb: 17836668 512-byte hdwr sectors (9132 MB) SCSI device sdb: drive cache: write back SCSI device sdb: 17836668 512-byte hdwr sectors (9132 MB) SCSI device sdb: drive cache: write back sdb: sdb1 sdb2 sd 1:0:4:0: Attached scsi disk sdb SCSI device sdc: 17836668 512-byte hdwr sectors (9132 MB) SCSI device sdc: drive cache: write back SCSI device sdc: 17836668 512-byte hdwr sectors (9132 MB) SCSI device sdc: drive cache: write back sdc: sdc1 sd 1:0:5:0: Attached scsi disk sdc SCSI device sdd: 17836668 512-byte hdwr sectors (9132 MB) SCSI device sdd: drive cache: write back SCSI device sdd: 17836668 512-byte hdwr sectors (9132 MB) SCSI device sdd: drive cache: write back sdd: sdd1 sd 1:0:6:0: Attached scsi disk sdd sr0: scsi3-mmc drive: 0x/0x cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr1: scsi-1 drive sd 1:0:3:0: Attached scsi generic sg0 type 0 sd 1:0:4:0: Attached scsi generic sg1 type 0 sd 1:0:5:0: Attached scsi generic sg2 type 0 sd 1:0:6:0: Attached scsi generic sg3 type 0 sr 2:0:2:0: Attached scsi generic sg4 type 5 sr 2:0:3:0: Attached scsi generic sg5 type 5 usbmon: debugfs is not available mice: PS/2 mouse device common for all mice md: linear personality registered as nr 1 md: raid0 personality registered as nr 2 md: raid1 personality registered as nr 3 md: raid5 personality registered as nr 4 raid5: measuring checksumming speed 8regs : 428.000 MB/sec 8regs_prefetch: 364.000 MB/sec 32regs : 432.000 MB/sec 32regs_prefetch: 388.000 MB/sec raid5: using function: 32regs (432.000 MB/sec) md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 4.39 oprofile: using timer interrupt. NET: Registered protocol family 2 IP route cache hash table entries: 131072 (order: 7, 524288 bytes) TCP established hash table entries: 262144 (order: 9, 3145728 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 10 IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. EXT3-fs: INFO: recovery required on readonly filesystem. EXT3-fs: write access will be enabled during recovery. kjournald starting. Commit interval 5 seconds EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: Badness in smp_call_function at arch/parisc/kernel/smp.c:348 Backtrace: [<10116430>] smp_call_function+0x374/0x3a4 [<101065bc>] flush_data_cache+0x24/0x40 [<10105764>] free_initmem+0x64/0x228 [<10104e84>] init+0x2dc/0x3c8 [<1010dc5c>] ret_from_kernel_thread+0x1c/0x24 484k freed INIT: version 2.86 booting Gentoo Linux; http://www.gentoo.org/ Copyright 1999-2005 Gentoo Foundation; Distributed under the GPLv2 * Mounting proc at /proc ... [ ok ] * Mounting sysfs at /sys ... [ ok ] * Mounting /dev for udev ... [ ok ] * Configuring system to use udev ... * Populating /dev with device nodes ... * Setting /sbin/udevsend as hotplug agent ... [ ok ] * Mounting devpts at /dev/pts ... [ ok ] * Activating (possible) swap ...Adding 2008084k swap on /dev/sdb1. Priority:-1 extents:1 across:2008084k [ ok ] * Remounting root filesystem read-only (if necessary) ... [ ok ] * Checking root filesystem .../dev/sda3: clean, 2162/1097728 files, 75932/2194880 blocks [ ok ] * Remounting root filesystem read/write ... [ ok ] * Setting hostname to nova ... [ ok ] * Calculating module dependencies ... [ ok ] * Using /etc/modules.autoload.d/kernel-2.6 as config: * Loading module lasi_82596 ... [ ok ] * Autoloaded 1 module(s) * Checking all filesystems .../dev/sda2: clean, 13/24192 files, 13497/96388 blocks /dev/sdb2: recovering journal /dev/sdc1: recovering journal /dev/sdd1: recovering journal /dev/sdc1: clean, 183415/1115040 files, 379438/2229010 blocks /dev/sdd1: clean, 12/1115040 files, 43208/2229010 blocks /dev/sdb2: clean, 25458/864960 files, 62574/1726987 blocks [ ok ] * Mounting local filesystems ... [ ok ] * Activating (possibly) more swap ... [ ok ] * Setting system clock to hardware clock [UTC] ... [ ok ] * Configuring kernel parameters ... [ ok ] * Updating environment ... [ ok ] * Cleaning /var/lock, /var/run ... [ ok ] * Cleaning /tmp directory ... [ ok ] * Loading key mappings ... [ ok ] * Setting terminal encoding to ASCII ... [ ok ] * Setting user font ... [ ok ] * Starting lo * Bringing up lo ... [ ok ] * Initializing random number generator ... [ ok ] INIT: Entering runlevel: 3 * Starting eth0 * Bringing up eth0 * 10.0.1.202 [ ok ] [ ok ] * Adding routes * default gw 10.0.1.1 ... [ ok ] * Starting local ... [ ok ] * Mounting network filesystems ... [ ok ] Kernel panic - not syncing: Kernel Fault What happens here is that it sticks at "Mounting Network Filesystems". If I press any key on my Serial console here, then it goes off and panics. The Debian boot CD's did something similar (freezing, then when I press a key it panics). I have tried most of the Gentoo hppa-sources with no avail, also tried the 2.6.15-rc5-pa5 Kernel from cvs.parisc-linux.org (as seen above). I'm not sure whats wrong here, and rebooting this beast is a very long process (20 minutes each time). Does anyone have any ideas? I'd really like to run Linux on this mammoth somehow, but I've tried everything I can think of with no sucssess (except the Gentoo Live CD, but that doesn't really do anything other then let me setup the system and compile a kernel). Cheers! Keven Tipping _______________________________________________ parisc-linux mailing list parisc-linux@lists.parisc-linux.org http://lists.parisc-linux.org/mailman/listinfo/parisc-linux