From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from dionis.kfti.knc.ru (unknown [195.208.38.2]) by dsl2.external.hp.com (Postfix) with ESMTP id D69AD485F for ; Thu, 20 Jun 2002 03:04:03 -0600 (MDT) Message-Id: Date: Thu, 20 Jun 2002 12:55:06 +0400 From: Masliy Alex To: Tim ter Laak Cc: parisc-linux@lists.parisc-linux.org Subject: Re: [parisc-linux] HP PA 715/50 installation trouble In-Reply-To: References: Mime-Version: 1.0 Content-Type: text/plain; charset="KOI8-R" Sender: parisc-linux-admin@lists.parisc-linux.org Errors-To: parisc-linux-admin@lists.parisc-linux.org List-Help: List-Post: List-Subscribe: , List-Id: parisc-linux developers list List-Unsubscribe: , List-Archive: On Tue, 18 Jun 2002 22:41:04 +0200 (CEST) Tim ter Laak wrote: >> >> At first, I tried to install from CDROM. In the proccess of booting >>the >> >> following messages were printed: >> >> --------------- >> >> Trying to scsi.4.0 >> >> Failed to initialize scsi.4.0 >> >> ENTRY_INIT status = -13 >> RH> Hmm. Was this drive working with that box under HP-UX? >> Yes, of course. I was mounted the Debian Install Disk under HP-UX. >> But it is old device (August 1993). TTL> I have the exact same problem on this hardware. As long as I boot the TTL> kernel from network, the whole linux system comes up fine. But the TTL> BIOS won't load the PALO from disk. :-( Throw in the old UX disk, and it TTL> just boots. I could not exactly understand what does the last phrase mean. Either I must stop my attempts to install Linux on this mashine or I must take older distribution version or what? TTL> I know there's a firmware update for the faster 715's (66MHz and TTL> up). Could this be a firmware bug? May be, but how can I find out that thing? -- С уважением, Маслий Алексей mailto:masliy@kfti.knc.ru