From: Finn Thain <fthain@telegraphics.com.au>
To: Helge Deller <deller@gmx.de>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>,
linux-m68k@lists.linux-m68k.org, linux-parisc@vger.kernel.org,
Kars de Jong <jongk@linux-m68k.org>
Subject: Re: [RFC][PATCH] m68k/parisc: Convert hp_sdc_rtc driver to rtc framework
Date: Wed, 28 Nov 2018 08:17:28 +1100 (AEDT) [thread overview]
Message-ID: <alpine.LNX.2.21.1811280815210.28@nippy.intranet> (raw)
In-Reply-To: <20181127210107.GA11661@ls3530.dellerweb.de>
Adding Kars to Cc.
On Tue, 27 Nov 2018, Helge Deller wrote:
> This patch is a first step to convert the hp_sdc_rtc driver to the new
> rtc framework.
>
> The HP SDC RTC driver is available on HP machines only, which run either
> a parisc or a m68k processor. I did tested this patch on a parisc
> machine, but it would be nice if someone with a m68k machine could test
> it too.
>
> Signed-off-by: Helge Deller <deller@gmx.de>
>
> diff --git a/drivers/input/misc/hp_sdc_rtc.c b/drivers/input/misc/hp_sdc_rtc.c
> index 47eb8ca729fe..c787bde12fce 100644
> --- a/drivers/input/misc/hp_sdc_rtc.c
> +++ b/drivers/input/misc/hp_sdc_rtc.c
> @@ -34,51 +34,27 @@
> */
>
> #include <linux/hp_sdc.h>
> -#include <linux/errno.h>
> -#include <linux/types.h>
> -#include <linux/init.h>
> #include <linux/module.h>
> -#include <linux/time.h>
> -#include <linux/miscdevice.h>
> -#include <linux/proc_fs.h>
> -#include <linux/seq_file.h>
> -#include <linux/poll.h>
> #include <linux/rtc.h>
> -#include <linux/mutex.h>
> #include <linux/semaphore.h>
>
> MODULE_AUTHOR("Brian S. Julin <bri@calyx.com>");
> MODULE_DESCRIPTION("HP i8042 SDC + MSM-58321 RTC Driver");
> MODULE_LICENSE("Dual BSD/GPL");
>
> -#define RTC_VERSION "1.10d"
> +#define RTC_VERSION "1.2"
>
> -static DEFINE_MUTEX(hp_sdc_rtc_mutex);
> -static unsigned long epoch = 2000;
> +static struct rtc_device *rtc;
>
> static struct semaphore i8042tregs;
>
> -static hp_sdc_irqhook hp_sdc_rtc_isr;
> -
> -static struct fasync_struct *hp_sdc_rtc_async_queue;
> -
> static DECLARE_WAIT_QUEUE_HEAD(hp_sdc_rtc_wait);
>
> -static ssize_t hp_sdc_rtc_read(struct file *file, char __user *buf,
> - size_t count, loff_t *ppos);
> -
> -static long hp_sdc_rtc_unlocked_ioctl(struct file *file,
> - unsigned int cmd, unsigned long arg);
> -
> -static unsigned int hp_sdc_rtc_poll(struct file *file, poll_table *wait);
> -
> -static int hp_sdc_rtc_open(struct inode *inode, struct file *file);
> -static int hp_sdc_rtc_fasync (int fd, struct file *filp, int on);
> -
> static void hp_sdc_rtc_isr (int irq, void *dev_id,
> uint8_t status, uint8_t data)
> {
> - return;
> + /* Notify RTC core on alarm event */
> + rtc_update_irq(rtc, 1, RTC_IRQF | RTC_AF);
> }
>
> static int hp_sdc_rtc_do_read_bbrtc (struct rtc_time *rtctm)
> @@ -105,17 +81,18 @@ static int hp_sdc_rtc_do_read_bbrtc (struct rtc_time *rtctm)
> t.act.semaphore = &tsem;
> sema_init(&tsem, 0);
>
> - if (hp_sdc_enqueue_transaction(&t)) return -1;
> + if (hp_sdc_enqueue_transaction(&t))
> + return -EIO;
>
> /* Put ourselves to sleep for results. */
> if (WARN_ON(down_interruptible(&tsem)))
> - return -1;
> + return -EIO;
>
> /* Check for nonpresence of BBRTC */
> if (!((tseq[83] | tseq[90] | tseq[69] | tseq[76] |
> tseq[55] | tseq[62] | tseq[34] | tseq[41] |
> tseq[20] | tseq[27] | tseq[6] | tseq[13]) & 0x0f))
> - return -1;
> + return -ENODEV;
>
> memset(rtctm, 0, sizeof(struct rtc_time));
> rtctm->tm_year = (tseq[83] & 0x0f) + (tseq[90] & 0x0f) * 10;
> @@ -132,17 +109,24 @@ static int hp_sdc_rtc_do_read_bbrtc (struct rtc_time *rtctm)
> static int hp_sdc_rtc_read_bbrtc (struct rtc_time *rtctm)
> {
> struct rtc_time tm, tm_last;
> - int i = 0;
> + int i = 0, ret;
>
> /* MSM-58321 has no read latch, so must read twice and compare. */
>
> - if (hp_sdc_rtc_do_read_bbrtc(&tm_last)) return -1;
> - if (hp_sdc_rtc_do_read_bbrtc(&tm)) return -1;
> + ret = hp_sdc_rtc_do_read_bbrtc(&tm_last);
> + if (ret)
> + return ret;
> + ret = hp_sdc_rtc_do_read_bbrtc(&tm);
> + if (ret)
> + return ret;
>
> while (memcmp(&tm, &tm_last, sizeof(struct rtc_time))) {
> - if (i++ > 4) return -1;
> + if (i++ > 4)
> + return -EAGAIN;
> memcpy(&tm_last, &tm, sizeof(struct rtc_time));
> - if (hp_sdc_rtc_do_read_bbrtc(&tm)) return -1;
> + ret = hp_sdc_rtc_do_read_bbrtc(&tm);
> + if (ret)
> + return ret;
> }
>
> memcpy(rtctm, &tm, sizeof(struct rtc_time));
> @@ -150,7 +134,6 @@ static int hp_sdc_rtc_read_bbrtc (struct rtc_time *rtctm)
> return 0;
> }
>
> -
> static int64_t hp_sdc_rtc_read_i8042timer (uint8_t loadcmd, int numreg)
> {
> hp_sdc_transaction t;
> @@ -178,16 +161,16 @@ static int64_t hp_sdc_rtc_read_i8042timer (uint8_t loadcmd, int numreg)
>
> /* Sleep if output regs in use. */
> if (WARN_ON(down_interruptible(&i8042tregs)))
> - return -1;
> + return -EIO;
>
> if (hp_sdc_enqueue_transaction(&t)) {
> up(&i8042tregs);
> - return -1;
> + return -EIO;
> }
>
> /* Sleep until results come back. */
> if (WARN_ON(down_interruptible(&i8042tregs)))
> - return -1;
> + return -EIO;
>
> up(&i8042tregs);
>
> @@ -198,13 +181,15 @@ static int64_t hp_sdc_rtc_read_i8042timer (uint8_t loadcmd, int numreg)
>
>
> /* Read the i8042 real-time clock */
> -static inline int hp_sdc_rtc_read_rt(struct timespec64 *res) {
> +static int hp_sdc_rtc_read_rt(struct timespec64 *res)
> +{
> int64_t raw;
> uint32_t tenms;
> unsigned int days;
>
> raw = hp_sdc_rtc_read_i8042timer(HP_SDC_CMD_LOAD_RT, 5);
> - if (raw < 0) return -1;
> + if (raw < 0)
> + return -EIO;
>
> tenms = (uint32_t)raw & 0xffffff;
> days = (unsigned int)(raw >> 24) & 0xffff;
> @@ -222,7 +207,8 @@ static inline int hp_sdc_rtc_read_fhs(struct timespec64 *res) {
> unsigned int tenms;
>
> raw = hp_sdc_rtc_read_i8042timer(HP_SDC_CMD_LOAD_FHS, 2);
> - if (raw < 0) return -1;
> + if (raw < 0)
> + return -EIO;
>
> tenms = (unsigned int)raw & 0xffff;
>
> @@ -239,7 +225,8 @@ static inline int hp_sdc_rtc_read_mt(struct timespec64 *res) {
> uint32_t tenms;
>
> raw = hp_sdc_rtc_read_i8042timer(HP_SDC_CMD_LOAD_MT, 3);
> - if (raw < 0) return -1;
> + if (raw < 0)
> + return -EIO;
>
> tenms = (uint32_t)raw & 0xffffff;
>
> @@ -256,7 +243,8 @@ static inline int hp_sdc_rtc_read_dt(struct timespec64 *res) {
> uint32_t tenms;
>
> raw = hp_sdc_rtc_read_i8042timer(HP_SDC_CMD_LOAD_DT, 3);
> - if (raw < 0) return -1;
> + if (raw < 0)
> + return -EIO;
>
> tenms = (uint32_t)raw & 0xffffff;
>
> @@ -273,7 +261,8 @@ static inline int hp_sdc_rtc_read_ct(struct timespec64 *res) {
> uint32_t tenms;
>
> raw = hp_sdc_rtc_read_i8042timer(HP_SDC_CMD_LOAD_CT, 3);
> - if (raw < 0) return -1;
> + if (raw < 0)
> + return -EIO;
>
> tenms = (uint32_t)raw & 0xffffff;
>
> @@ -284,11 +273,11 @@ static inline int hp_sdc_rtc_read_ct(struct timespec64 *res) {
> }
>
>
> -#if 0 /* not used yet */
> /* Set the i8042 real-time clock */
> -static int hp_sdc_rtc_set_rt (struct timeval *setto)
> +static int hp_sdc_rtc_set_rt(struct rtc_time *tm)
> {
> uint32_t tenms;
> + time64_t seconds;
> unsigned int days;
> hp_sdc_transaction t;
> uint8_t tseq[11] = {
> @@ -300,17 +289,13 @@ static int hp_sdc_rtc_set_rt (struct timeval *setto)
>
> t.endidx = 10;
>
> - if (0xffff < setto->tv_sec / 86400) return -1;
> - days = setto->tv_sec / 86400;
> - if (0xffff < setto->tv_usec / 1000000 / 86400) return -1;
> - days += ((setto->tv_sec % 86400) + setto->tv_usec / 1000000) / 86400;
> - if (days > 0xffff) return -1;
> -
> - if (0xffffff < setto->tv_sec) return -1;
> - tenms = setto->tv_sec * 100;
> - if (0xffffff < setto->tv_usec / 10000) return -1;
> - tenms += setto->tv_usec / 10000;
> - if (tenms > 0xffffff) return -1;
> + seconds = rtc_tm_to_time64(tm);
> + days = seconds / 86400;
> + if (days > 0xffff)
> + return -EINVAL;
> + tenms = (seconds % 86400) * 100;
> + if (tenms > 0xffffff)
> + return -EINVAL;
>
> tseq[3] = (uint8_t)(tenms & 0xff);
> tseq[4] = (uint8_t)((tenms >> 8) & 0xff);
> @@ -321,12 +306,14 @@ static int hp_sdc_rtc_set_rt (struct timeval *setto)
>
> t.seq = tseq;
>
> - if (hp_sdc_enqueue_transaction(&t)) return -1;
> + if (hp_sdc_enqueue_transaction(&t))
> + return -EIO;
> return 0;
> }
>
> /* Set the i8042 fast handshake timer */
> -static int hp_sdc_rtc_set_fhs (struct timeval *setto)
> +#if 0
> +static int hp_sdc_rtc_set_fhs(struct timespec64 *setto)
> {
> uint32_t tenms;
> hp_sdc_transaction t;
> @@ -337,36 +324,36 @@ static int hp_sdc_rtc_set_fhs (struct timeval *setto)
>
> t.endidx = 4;
>
> - if (0xffff < setto->tv_sec) return -1;
> tenms = setto->tv_sec * 100;
> - if (0xffff < setto->tv_usec / 10000) return -1;
> - tenms += setto->tv_usec / 10000;
> - if (tenms > 0xffff) return -1;
> + tenms += setto->tv_nsec / 10000 / 1000;
> + if (tenms > 0xffff)
> + return -EINVAL;
>
> tseq[3] = (uint8_t)(tenms & 0xff);
> tseq[4] = (uint8_t)((tenms >> 8) & 0xff);
>
> t.seq = tseq;
>
> - if (hp_sdc_enqueue_transaction(&t)) return -1;
> + if (hp_sdc_enqueue_transaction(&t))
> + return -EIO;
> return 0;
> }
> -
> +#endif
>
> /* Set the i8042 match timer (a.k.a. alarm) */
> -#define hp_sdc_rtc_set_mt (setto) \
> +#define hp_sdc_rtc_set_mt(setto) \
> hp_sdc_rtc_set_i8042timer(setto, HP_SDC_CMD_SET_MT)
>
> /* Set the i8042 delay timer */
> -#define hp_sdc_rtc_set_dt (setto) \
> +#define hp_sdc_rtc_set_dt(setto) \
> hp_sdc_rtc_set_i8042timer(setto, HP_SDC_CMD_SET_DT)
>
> /* Set the i8042 cycle timer (a.k.a. periodic) */
> -#define hp_sdc_rtc_set_ct (setto) \
> +#define hp_sdc_rtc_set_ct(setto) \
> hp_sdc_rtc_set_i8042timer(setto, HP_SDC_CMD_SET_CT)
>
> /* Set one of the i8042 3-byte wide timers */
> -static int hp_sdc_rtc_set_i8042timer (struct timeval *setto, uint8_t setcmd)
> +static int hp_sdc_rtc_set_i8042timer(struct timespec64 *setto, uint8_t setcmd)
> {
> uint32_t tenms;
> hp_sdc_transaction t;
> @@ -377,58 +364,96 @@ static int hp_sdc_rtc_set_i8042timer (struct timeval *setto, uint8_t setcmd)
>
> t.endidx = 6;
>
> - if (0xffffff < setto->tv_sec) return -1;
> + if (setto->tv_sec > 0xffffff)
> + return -EINVAL;
> tenms = setto->tv_sec * 100;
> - if (0xffffff < setto->tv_usec / 10000) return -1;
> - tenms += setto->tv_usec / 10000;
> - if (tenms > 0xffffff) return -1;
> + if (setto->tv_nsec / 10000 / 1000 > 0xffffff)
> + return -EINVAL;
> + tenms += setto->tv_nsec / 10000 / 1000;
> + if (tenms > 0xffffff)
> + return -EINVAL;
>
> tseq[1] = setcmd;
> tseq[3] = (uint8_t)(tenms & 0xff);
> tseq[4] = (uint8_t)((tenms >> 8) & 0xff);
> tseq[5] = (uint8_t)((tenms >> 16) & 0xff);
>
> - t.seq = tseq;
> + t.seq = tseq;
>
> if (hp_sdc_enqueue_transaction(&t)) {
> - return -1;
> + return -EIO;
> }
> return 0;
> }
> -#endif
>
> -static ssize_t hp_sdc_rtc_read(struct file *file, char __user *buf,
> - size_t count, loff_t *ppos) {
> - ssize_t retval;
> -
> - if (count < sizeof(unsigned long))
> - return -EINVAL;
> -
> - retval = put_user(68, (unsigned long __user *)buf);
> - return retval;
> +static int hp_sdc_rtc_get_time(struct device *dev, struct rtc_time *tm)
> +{
> + return hp_sdc_rtc_read_bbrtc(tm);
> }
>
> -static __poll_t hp_sdc_rtc_poll(struct file *file, poll_table *wait)
> +static int hp_sdc_rtc_set_time(struct device *dev, struct rtc_time *tm)
> {
> - unsigned long l;
> + if (!rtc_valid_tm(tm))
> + return -EINVAL;
>
> - l = 0;
> - if (l != 0)
> - return EPOLLIN | EPOLLRDNORM;
> - return 0;
> + return hp_sdc_rtc_set_rt(tm);
> }
>
> -static int hp_sdc_rtc_open(struct inode *inode, struct file *file)
> +static int hp_sdc_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *wa)
> {
> - return 0;
> + /* Read the present alarm time */
> + int ret;
> + struct timespec64 ttime;
> + struct rtc_time *wtime = &wa->time;
> +
> + ret = hp_sdc_rtc_read_mt(&ttime);
> + if (ret)
> + return ret;
> + ret = hp_sdc_rtc_read_bbrtc(wtime);
> + if (ret)
> + return ret;
> +
> + wtime->tm_hour = ttime.tv_sec / 3600; ttime.tv_sec %= 3600;
> + wtime->tm_min = ttime.tv_sec / 60; ttime.tv_sec %= 60;
> + wtime->tm_sec = ttime.tv_sec;
> +
> + wa->enabled = 0;
> + wa->pending = 0;
> +
> + return 0;
> }
>
> -static int hp_sdc_rtc_fasync (int fd, struct file *filp, int on)
> +static int hp_sdc_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *wa)
> {
> - return fasync_helper (fd, filp, on, &hp_sdc_rtc_async_queue);
> + /* Set the alarm time */
> + struct timespec64 ttime;
> +
> + /*
> + * This expects a struct hp_sdc_rtc_time. Writing 0xff means
> + * "don't care" or "match all" for PC timers. The HP SDC
> + * does not support that perk, but it could be emulated fairly
> + * easily. Only the tm_hour, tm_min and tm_sec are used.
> + * We could do it with 10ms accuracy with the HP SDC, if the
> + * rtc interface left us a way to do that.
> + */
> +
> + if (wa->time.tm_hour > 23)
> + return -EINVAL;
> + if (wa->time.tm_min > 59)
> + return -EINVAL;
> + if (wa->time.tm_sec > 59)
> + return -EINVAL;
> +
> + ttime.tv_sec = wa->time.tm_hour * 3600 +
> + wa->time.tm_min * 60 + wa->time.tm_sec;
> + ttime.tv_nsec = 0;
> + if (hp_sdc_rtc_set_mt(&ttime))
> + return -EIO;
> +
> + return 0;
> }
>
> -static int hp_sdc_rtc_proc_show(struct seq_file *m, void *v)
> +static int hp_sdc_rtc_proc(struct device *dev, struct seq_file *m)
> {
> #define YN(bit) ("no")
> #define NY(bit) ("yes")
> @@ -442,11 +467,10 @@ static int hp_sdc_rtc_proc_show(struct seq_file *m, void *v)
> } else {
> seq_printf(m,
> "rtc_time\t: %02d:%02d:%02d\n"
> - "rtc_date\t: %04d-%02d-%02d\n"
> - "rtc_epoch\t: %04lu\n",
> + "rtc_date\t: %04d-%02d-%02d\n",
> tm.tm_hour, tm.tm_min, tm.tm_sec,
> tm.tm_year + 1900, tm.tm_mon + 1,
> - tm.tm_mday, epoch);
> + tm.tm_mday);
> }
>
> if (hp_sdc_rtc_read_rt(&tv)) {
> @@ -509,185 +533,42 @@ static int hp_sdc_rtc_proc_show(struct seq_file *m, void *v)
> #undef NY
> }
>
> -static int hp_sdc_rtc_ioctl(struct file *file,
> +static int hp_sdc_rtc_ioctl(struct device *dev,
> unsigned int cmd, unsigned long arg)
> {
> -#if 1
> - return -EINVAL;
> -#else
> -
> - struct rtc_time wtime;
> - struct timeval ttime;
> - int use_wtime = 0;
> -
> - /* This needs major work. */
> -
> - switch (cmd) {
> -
> - case RTC_AIE_OFF: /* Mask alarm int. enab. bit */
> - case RTC_AIE_ON: /* Allow alarm interrupts. */
> + switch (cmd) {
> + case RTC_AIE_OFF: /* Mask alarm int. enab. bit */
> + case RTC_AIE_ON: /* Allow alarm interrupts. */
> case RTC_PIE_OFF: /* Mask periodic int. enab. bit */
> - case RTC_PIE_ON: /* Allow periodic ints */
> - case RTC_UIE_ON: /* Allow ints for RTC updates. */
> - case RTC_UIE_OFF: /* Allow ints for RTC updates. */
> - {
> + case RTC_PIE_ON: /* Allow periodic ints */
> + case RTC_UIE_ON: /* Allow ints for RTC updates. */
> + case RTC_UIE_OFF: /* Allow ints for RTC updates. */
> + {
> /* We cannot mask individual user timers and we
> cannot tell them apart when they occur, so it
> would be disingenuous to succeed these IOCTLs */
> return -EINVAL;
> - }
> - case RTC_ALM_READ: /* Read the present alarm time */
> - {
> - if (hp_sdc_rtc_read_mt(&ttime)) return -EFAULT;
> - if (hp_sdc_rtc_read_bbrtc(&wtime)) return -EFAULT;
> -
> - wtime.tm_hour = ttime.tv_sec / 3600; ttime.tv_sec %= 3600;
> - wtime.tm_min = ttime.tv_sec / 60; ttime.tv_sec %= 60;
> - wtime.tm_sec = ttime.tv_sec;
> -
> - break;
> - }
> - case RTC_IRQP_READ: /* Read the periodic IRQ rate. */
> - {
> - return put_user(hp_sdc_rtc_freq, (unsigned long *)arg);
> - }
> - case RTC_IRQP_SET: /* Set periodic IRQ rate. */
> - {
> - /*
> - * The max we can do is 100Hz.
> - */
> -
> - if ((arg < 1) || (arg > 100)) return -EINVAL;
> - ttime.tv_sec = 0;
> - ttime.tv_usec = 1000000 / arg;
> - if (hp_sdc_rtc_set_ct(&ttime)) return -EFAULT;
> - hp_sdc_rtc_freq = arg;
> - return 0;
> - }
> - case RTC_ALM_SET: /* Store a time into the alarm */
> - {
> - /*
> - * This expects a struct hp_sdc_rtc_time. Writing 0xff means
> - * "don't care" or "match all" for PC timers. The HP SDC
> - * does not support that perk, but it could be emulated fairly
> - * easily. Only the tm_hour, tm_min and tm_sec are used.
> - * We could do it with 10ms accuracy with the HP SDC, if the
> - * rtc interface left us a way to do that.
> - */
> - struct hp_sdc_rtc_time alm_tm;
> -
> - if (copy_from_user(&alm_tm, (struct hp_sdc_rtc_time*)arg,
> - sizeof(struct hp_sdc_rtc_time)))
> - return -EFAULT;
> -
> - if (alm_tm.tm_hour > 23) return -EINVAL;
> - if (alm_tm.tm_min > 59) return -EINVAL;
> - if (alm_tm.tm_sec > 59) return -EINVAL;
> -
> - ttime.sec = alm_tm.tm_hour * 3600 +
> - alm_tm.tm_min * 60 + alm_tm.tm_sec;
> - ttime.usec = 0;
> - if (hp_sdc_rtc_set_mt(&ttime)) return -EFAULT;
> - return 0;
> - }
> - case RTC_RD_TIME: /* Read the time/date from RTC */
> - {
> - if (hp_sdc_rtc_read_bbrtc(&wtime)) return -EFAULT;
> - break;
> - }
> - case RTC_SET_TIME: /* Set the RTC */
> - {
> - struct rtc_time hp_sdc_rtc_tm;
> - unsigned char mon, day, hrs, min, sec, leap_yr;
> - unsigned int yrs;
> -
> - if (!capable(CAP_SYS_TIME))
> - return -EACCES;
> - if (copy_from_user(&hp_sdc_rtc_tm, (struct rtc_time *)arg,
> - sizeof(struct rtc_time)))
> - return -EFAULT;
> -
> - yrs = hp_sdc_rtc_tm.tm_year + 1900;
> - mon = hp_sdc_rtc_tm.tm_mon + 1; /* tm_mon starts at zero */
> - day = hp_sdc_rtc_tm.tm_mday;
> - hrs = hp_sdc_rtc_tm.tm_hour;
> - min = hp_sdc_rtc_tm.tm_min;
> - sec = hp_sdc_rtc_tm.tm_sec;
> -
> - if (yrs < 1970)
> - return -EINVAL;
> -
> - leap_yr = ((!(yrs % 4) && (yrs % 100)) || !(yrs % 400));
> -
> - if ((mon > 12) || (day == 0))
> - return -EINVAL;
> - if (day > (days_in_mo[mon] + ((mon == 2) && leap_yr)))
> - return -EINVAL;
> - if ((hrs >= 24) || (min >= 60) || (sec >= 60))
> - return -EINVAL;
> -
> - if ((yrs -= eH) > 255) /* They are unsigned */
> - return -EINVAL;
> -
> -
> - return 0;
> - }
> - case RTC_EPOCH_READ: /* Read the epoch. */
> - {
> - return put_user (epoch, (unsigned long *)arg);
> - }
> - case RTC_EPOCH_SET: /* Set the epoch. */
> - {
> - /*
> - * There were no RTC clocks before 1900.
> - */
> - if (arg < 1900)
> - return -EINVAL;
> - if (!capable(CAP_SYS_TIME))
> - return -EACCES;
> -
> - epoch = arg;
> - return 0;
> - }
> - default:
> - return -EINVAL;
> - }
> - return copy_to_user((void *)arg, &wtime, sizeof wtime) ? -EFAULT : 0;
> -#endif
> -}
> -
> -static long hp_sdc_rtc_unlocked_ioctl(struct file *file,
> - unsigned int cmd, unsigned long arg)
> -{
> - int ret;
> -
> - mutex_lock(&hp_sdc_rtc_mutex);
> - ret = hp_sdc_rtc_ioctl(file, cmd, arg);
> - mutex_unlock(&hp_sdc_rtc_mutex);
> -
> - return ret;
> + }
> + default:
> + return -ENOIOCTLCMD;
> + }
> + return 0;
> }
>
> -
> -static const struct file_operations hp_sdc_rtc_fops = {
> - .owner = THIS_MODULE,
> - .llseek = no_llseek,
> - .read = hp_sdc_rtc_read,
> - .poll = hp_sdc_rtc_poll,
> - .unlocked_ioctl = hp_sdc_rtc_unlocked_ioctl,
> - .open = hp_sdc_rtc_open,
> - .fasync = hp_sdc_rtc_fasync,
> -};
> -
> -static struct miscdevice hp_sdc_rtc_dev = {
> - .minor = RTC_MINOR,
> - .name = "rtc_HIL",
> - .fops = &hp_sdc_rtc_fops
> +static const struct rtc_class_ops hp_sdc_rtc_ops = {
> + .ioctl = hp_sdc_rtc_ioctl,
> + .proc = hp_sdc_rtc_proc,
> + .read_time = hp_sdc_rtc_get_time,
> + .set_time = hp_sdc_rtc_set_time,
> + .read_alarm = hp_sdc_rtc_read_alarm,
> + .set_alarm = hp_sdc_rtc_set_alarm,
> + // int (*alarm_irq_enable)(struct device *, unsigned int enabled);
> };
>
> static int __init hp_sdc_rtc_init(void)
> {
> int ret;
> + struct rtc_time tm;
>
> #ifdef __mc68000__
> if (!MACH_IS_HP300)
> @@ -696,14 +577,22 @@ static int __init hp_sdc_rtc_init(void)
>
> sema_init(&i8042tregs, 1);
>
> + /* check if BBRTC is available */
> + ret = hp_sdc_rtc_read_bbrtc(&tm);
> + if (ret) {
> + pr_info("hil-rtc: BBRTC not available.");
> + return -ENODEV;
> + }
> +
> if ((ret = hp_sdc_request_timer_irq(&hp_sdc_rtc_isr)))
> return ret;
> - if (misc_register(&hp_sdc_rtc_dev) != 0)
> - printk(KERN_INFO "Could not register misc. dev for i8042 rtc\n");
>
> - proc_create_single("driver/rtc", 0, NULL, hp_sdc_rtc_proc_show);
> + rtc = devm_rtc_device_register(hp_sdc_get_sdc_device(),
> + "hil-rtc", &hp_sdc_rtc_ops, THIS_MODULE);
> + if (IS_ERR(rtc))
> + return PTR_ERR(rtc);
>
> - printk(KERN_INFO "HP i8042 SDC + MSM-58321 RTC support loaded "
> + pr_info("hil-rtc: HP i8042 SDC + MSM-58321 RTC support loaded "
> "(RTC v " RTC_VERSION ")\n");
>
> return 0;
> @@ -711,10 +600,9 @@ static int __init hp_sdc_rtc_init(void)
>
> static void __exit hp_sdc_rtc_exit(void)
> {
> - remove_proc_entry ("driver/rtc", NULL);
> - misc_deregister(&hp_sdc_rtc_dev);
> + devm_rtc_device_unregister(hp_sdc_get_sdc_device(), rtc);
> hp_sdc_release_timer_irq(hp_sdc_rtc_isr);
> - printk(KERN_INFO "HP i8042 SDC + MSM-58321 RTC support unloaded\n");
> + pr_info("hil-rtc: HP i8042 SDC + MSM-58321 RTC support unloaded\n");
> }
>
> module_init(hp_sdc_rtc_init);
> diff --git a/drivers/input/serio/hp_sdc.c b/drivers/input/serio/hp_sdc.c
> index 0b8a25c58d02..3e0ad6a4907f 100644
> --- a/drivers/input/serio/hp_sdc.c
> +++ b/drivers/input/serio/hp_sdc.c
> @@ -110,6 +110,17 @@ MODULE_PARM_DESC(no_hpsdc, "Do not enable HP SDC driver.");
>
> static hp_i8042_sdc hp_sdc; /* All driver state is kept in here. */
>
> +struct device *hp_sdc_get_sdc_device(void)
> +{
> +#if defined(__hppa__)
> + return &hp_sdc.dev->dev;
> +#elif defined(__mc68000__)
> + /* hp_sdc.dev is 1, so return NULL instead. */
> + return NULL;
> +#endif
> +}
> +EXPORT_SYMBOL(hp_sdc_get_sdc_device);
> +
> /*************** primitives for use in any context *********************/
> static inline uint8_t hp_sdc_status_in8(void)
> {
> diff --git a/include/linux/hp_sdc.h b/include/linux/hp_sdc.h
> index 6f1dee7e67e0..8988e32adebd 100644
> --- a/include/linux/hp_sdc.h
> +++ b/include/linux/hp_sdc.h
> @@ -298,4 +298,6 @@ typedef struct {
>
> } hp_i8042_sdc;
>
> +struct device *hp_sdc_get_sdc_device(void);
> +
> #endif /* _LINUX_HP_SDC_H */
>
next prev parent reply other threads:[~2018-11-27 21:17 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-11-27 21:01 [RFC][PATCH] m68k/parisc: Convert hp_sdc_rtc driver to rtc framework Helge Deller
2018-11-27 21:17 ` Finn Thain [this message]
2019-01-07 7:31 ` Helge Deller
2019-01-07 21:59 ` Finn Thain
2019-01-08 8:34 ` Kars de Jong
2019-01-21 8:45 ` Kars de Jong
2019-01-26 13:47 ` Helge Deller
2019-01-28 8:35 ` Kars de Jong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=alpine.LNX.2.21.1811280815210.28@nippy.intranet \
--to=fthain@telegraphics.com.au \
--cc=deller@gmx.de \
--cc=geert@linux-m68k.org \
--cc=jongk@linux-m68k.org \
--cc=linux-m68k@lists.linux-m68k.org \
--cc=linux-parisc@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox