From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: stable@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
patches@lists.linux.dev, Reka Norman <rekanorman@chromium.org>,
Mathias Nyman <mathias.nyman@linux.intel.com>
Subject: [PATCH 6.0 20/28] xhci: Apply XHCI_RESET_TO_DEFAULT quirk to ADL-N
Date: Mon, 19 Dec 2022 20:23:07 +0100 [thread overview]
Message-ID: <20221219182945.057039552@linuxfoundation.org> (raw)
In-Reply-To: <20221219182944.179389009@linuxfoundation.org>
From: Reka Norman <rekanorman@chromium.org>
commit fed70b61ef2c0aed54456db3d485b215f6cc3209 upstream.
ADL-N systems have the same issue as ADL-P, where a large boot firmware
delay is seen if USB ports are left in U3 at shutdown. So apply the
XHCI_RESET_TO_DEFAULT quirk to ADL-N as well.
This patch depends on commit 34cd2db408d5 ("xhci: Add quirk to reset
host back to default state at shutdown").
The issue it fixes is a ~20s boot time delay when booting from S5. It
affects ADL-N devices, and ADL-N support was added starting from v5.16.
Cc: stable@vger.kernel.org
Signed-off-by: Reka Norman <rekanorman@chromium.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20221130091944.2171610-3-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/host/xhci-pci.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -59,6 +59,7 @@
#define PCI_DEVICE_ID_INTEL_TIGER_LAKE_XHCI 0x9a13
#define PCI_DEVICE_ID_INTEL_MAPLE_RIDGE_XHCI 0x1138
#define PCI_DEVICE_ID_INTEL_ALDER_LAKE_PCH_XHCI 0x51ed
+#define PCI_DEVICE_ID_INTEL_ALDER_LAKE_N_PCH_XHCI 0x54ed
#define PCI_DEVICE_ID_AMD_RENOIR_XHCI 0x1639
#define PCI_DEVICE_ID_AMD_PROMONTORYA_4 0x43b9
@@ -246,7 +247,8 @@ static void xhci_pci_quirks(struct devic
xhci->quirks |= XHCI_MISSING_CAS;
if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
- pdev->device == PCI_DEVICE_ID_INTEL_ALDER_LAKE_PCH_XHCI)
+ (pdev->device == PCI_DEVICE_ID_INTEL_ALDER_LAKE_PCH_XHCI ||
+ pdev->device == PCI_DEVICE_ID_INTEL_ALDER_LAKE_N_PCH_XHCI))
xhci->quirks |= XHCI_RESET_TO_DEFAULT;
if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
next prev parent reply other threads:[~2022-12-19 19:26 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-12-19 19:22 [PATCH 6.0 00/28] 6.0.15-rc1 review Greg Kroah-Hartman
2022-12-19 19:22 ` [PATCH 6.0 01/28] PCI: mt7621: Add sentinel to quirks table Greg Kroah-Hartman
2022-12-19 19:22 ` [PATCH 6.0 02/28] kallsyms: Make module_kallsyms_on_each_symbol generally available Greg Kroah-Hartman
2022-12-19 19:22 ` [PATCH 6.0 03/28] ftrace: Add support to resolve module symbols in ftrace_lookup_symbols Greg Kroah-Hartman
2022-12-19 19:22 ` [PATCH 6.0 04/28] bpf: Rename __bpf_kprobe_multi_cookie_cmp to bpf_kprobe_multi_addrs_cmp Greg Kroah-Hartman
2022-12-19 19:22 ` [PATCH 6.0 05/28] bpf: Take module reference on kprobe_multi link Greg Kroah-Hartman
2022-12-19 19:22 ` [PATCH 6.0 06/28] selftests/bpf: Add load_kallsyms_refresh function Greg Kroah-Hartman
2022-12-19 19:22 ` [PATCH 6.0 07/28] selftests/bpf: Add bpf_testmod_fentry_* functions Greg Kroah-Hartman
2022-12-19 19:22 ` [PATCH 6.0 08/28] selftests/bpf: Add kprobe_multi check to module attach test Greg Kroah-Hartman
2022-12-19 19:22 ` [PATCH 6.0 09/28] selftests/bpf: Add kprobe_multi kmod attach api tests Greg Kroah-Hartman
2022-12-19 19:22 ` [PATCH 6.0 10/28] udf: Discard preallocation before extending file with a hole Greg Kroah-Hartman
2022-12-19 19:22 ` [PATCH 6.0 11/28] udf: Fix preallocation discarding at indirect extent boundary Greg Kroah-Hartman
2022-12-19 19:22 ` [PATCH 6.0 12/28] udf: Do not bother looking for prealloc extents if i_lenExtents matches i_size Greg Kroah-Hartman
2022-12-19 19:23 ` [PATCH 6.0 13/28] udf: Fix extending file within last block Greg Kroah-Hartman
2022-12-19 19:23 ` [PATCH 6.0 14/28] usb: gadget: uvc: Prevent buffer overflow in setup handler Greg Kroah-Hartman
2022-12-19 19:23 ` [PATCH 6.0 15/28] USB: serial: option: add Quectel EM05-G modem Greg Kroah-Hartman
2022-12-19 19:23 ` [PATCH 6.0 16/28] USB: serial: cp210x: add Kamstrup RF sniffer PIDs Greg Kroah-Hartman
2022-12-19 19:23 ` [PATCH 6.0 17/28] USB: serial: f81232: fix division by zero on line-speed change Greg Kroah-Hartman
2022-12-19 19:23 ` [PATCH 6.0 18/28] USB: serial: f81534: " Greg Kroah-Hartman
2022-12-19 19:23 ` [PATCH 6.0 19/28] ALSA: hda/realtek: fix mute/micmute LEDs for a HP ProBook Greg Kroah-Hartman
2022-12-19 19:23 ` Greg Kroah-Hartman [this message]
2022-12-19 19:23 ` [PATCH 6.0 21/28] igb: Initialize mailbox message for VF reset Greg Kroah-Hartman
2022-12-19 19:23 ` [PATCH 6.0 22/28] usb: typec: ucsi: Resume in separate work Greg Kroah-Hartman
2022-12-19 19:23 ` [PATCH 6.0 23/28] usb: dwc3: pci: Update PCIe device ID for USB3 controller on CPU sub-system for Raptor Lake Greg Kroah-Hartman
2022-12-19 19:23 ` [PATCH 6.0 24/28] KEYS: encrypted: fix key instantiation with user-provided data Greg Kroah-Hartman
2022-12-19 19:23 ` [PATCH 6.0 25/28] usb: ulpi: defer ulpi_register on ulpi_read_id timeout Greg Kroah-Hartman
2022-12-19 19:23 ` [PATCH 6.0 26/28] Bluetooth: L2CAP: Fix u8 overflow Greg Kroah-Hartman
2022-12-19 19:23 ` [PATCH 6.0 27/28] selftests: net: Use "grep -E" instead of "egrep" Greg Kroah-Hartman
2022-12-19 19:23 ` [PATCH 6.0 28/28] net: loopback: use NET_NAME_PREDICTABLE for name_assign_type Greg Kroah-Hartman
2022-12-19 23:55 ` [PATCH 6.0 00/28] 6.0.15-rc1 review Florian Fainelli
2022-12-20 0:16 ` Shuah Khan
2022-12-20 4:44 ` Bagas Sanjaya
2022-12-20 6:41 ` Naresh Kamboju
2022-12-20 11:21 ` Sudip Mukherjee (Codethink)
2022-12-20 14:49 ` Guenter Roeck
2022-12-20 15:33 ` Guenter Roeck
2022-12-21 1:07 ` Guenter Roeck
2022-12-20 17:44 ` Ron Economos
2022-12-20 17:50 ` Jon Hunter
2022-12-21 1:16 ` Slade Watkins
2022-12-21 16:04 ` Justin Forbes
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221219182945.057039552@linuxfoundation.org \
--to=gregkh@linuxfoundation.org \
--cc=mathias.nyman@linux.intel.com \
--cc=patches@lists.linux.dev \
--cc=rekanorman@chromium.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox