[PATCH 5.4 013/104] net/ps3_gelic_net: Fix RX sk_buff length

[Greg Kroah-Hartman <gregkh@linuxfoundation.org>]

From: Geoff Levand <geoff@infradead.org>

[ Upstream commit 19b3bb51c3bc288b3f2c6f8c4450b0f548320625 ]

The Gelic Ethernet device needs to have the RX sk_buffs aligned to
GELIC_NET_RXBUF_ALIGN, and also the length of the RX sk_buffs must
be a multiple of GELIC_NET_RXBUF_ALIGN.

The current Gelic Ethernet driver was not allocating sk_buffs large
enough to allow for this alignment.

Also, correct the maximum and minimum MTU sizes, and add a new
preprocessor macro for the maximum frame size, GELIC_NET_MAX_FRAME.

Fixes various randomly occurring runtime network errors.

Fixes: 02c1889166b4 ("ps3: gigabit ethernet driver for PS3, take3")
Signed-off-by: Geoff Levand <geoff@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/toshiba/ps3_gelic_net.c | 19 ++++++++++---------
 drivers/net/ethernet/toshiba/ps3_gelic_net.h |  5 +++--
 2 files changed, 13 insertions(+), 11 deletions(-)

diff --git a/drivers/net/ethernet/toshiba/ps3_gelic_net.c b/drivers/net/ethernet/toshiba/ps3_gelic_net.c
index 9d9f8acb7ee33..c3e3477081e48 100644
--- a/drivers/net/ethernet/toshiba/ps3_gelic_net.c
+++ b/drivers/net/ethernet/toshiba/ps3_gelic_net.c
@@ -365,28 +365,29 @@ static int gelic_card_init_chain(struct gelic_card *card,
  *
  * allocates a new rx skb, iommu-maps it and attaches it to the descriptor.
  * Activate the descriptor state-wise
+ *
+ * Gelic RX sk_buffs must be aligned to GELIC_NET_RXBUF_ALIGN and the length
+ * must be a multiple of GELIC_NET_RXBUF_ALIGN.
  */
 static int gelic_descr_prepare_rx(struct gelic_card *card,
 				  struct gelic_descr *descr)
 {
+	static const unsigned int rx_skb_size =
+		ALIGN(GELIC_NET_MAX_FRAME, GELIC_NET_RXBUF_ALIGN) +
+		GELIC_NET_RXBUF_ALIGN - 1;
 	int offset;
-	unsigned int bufsize;
 
 	if (gelic_descr_get_status(descr) !=  GELIC_DESCR_DMA_NOT_IN_USE)
 		dev_info(ctodev(card), "%s: ERROR status\n", __func__);
-	/* we need to round up the buffer size to a multiple of 128 */
-	bufsize = ALIGN(GELIC_NET_MAX_MTU, GELIC_NET_RXBUF_ALIGN);
 
-	/* and we need to have it 128 byte aligned, therefore we allocate a
-	 * bit more */
-	descr->skb = dev_alloc_skb(bufsize + GELIC_NET_RXBUF_ALIGN - 1);
+	descr->skb = netdev_alloc_skb(*card->netdev, rx_skb_size);
 	if (!descr->skb) {
 		descr->buf_addr = 0; /* tell DMAC don't touch memory */
 		dev_info(ctodev(card),
 			 "%s:allocate skb failed !!\n", __func__);
 		return -ENOMEM;
 	}
-	descr->buf_size = cpu_to_be32(bufsize);
+	descr->buf_size = cpu_to_be32(rx_skb_size);
 	descr->dmac_cmd_status = 0;
 	descr->result_size = 0;
 	descr->valid_size = 0;
@@ -399,7 +400,7 @@ static int gelic_descr_prepare_rx(struct gelic_card *card,
 	/* io-mmu-map the skb */
 	descr->buf_addr = cpu_to_be32(dma_map_single(ctodev(card),
 						     descr->skb->data,
-						     GELIC_NET_MAX_MTU,
+						     GELIC_NET_MAX_FRAME,
 						     DMA_FROM_DEVICE));
 	if (!descr->buf_addr) {
 		dev_kfree_skb_any(descr->skb);
@@ -917,7 +918,7 @@ static void gelic_net_pass_skb_up(struct gelic_descr *descr,
 	data_error = be32_to_cpu(descr->data_error);
 	/* unmap skb buffer */
 	dma_unmap_single(ctodev(card), be32_to_cpu(descr->buf_addr),
-			 GELIC_NET_MAX_MTU,
+			 GELIC_NET_MAX_FRAME,
 			 DMA_FROM_DEVICE);
 
 	skb_put(skb, be32_to_cpu(descr->valid_size)?
diff --git a/drivers/net/ethernet/toshiba/ps3_gelic_net.h b/drivers/net/ethernet/toshiba/ps3_gelic_net.h
index 051033580f0a6..7624c68c95cbf 100644
--- a/drivers/net/ethernet/toshiba/ps3_gelic_net.h
+++ b/drivers/net/ethernet/toshiba/ps3_gelic_net.h
@@ -19,8 +19,9 @@
 #define GELIC_NET_RX_DESCRIPTORS        128 /* num of descriptors */
 #define GELIC_NET_TX_DESCRIPTORS        128 /* num of descriptors */
 
-#define GELIC_NET_MAX_MTU               VLAN_ETH_FRAME_LEN
-#define GELIC_NET_MIN_MTU               VLAN_ETH_ZLEN
+#define GELIC_NET_MAX_FRAME             2312
+#define GELIC_NET_MAX_MTU               2294
+#define GELIC_NET_MIN_MTU               64
 #define GELIC_NET_RXBUF_ALIGN           128
 #define GELIC_CARD_RX_CSUM_DEFAULT      1 /* hw chksum */
 #define GELIC_NET_WATCHDOG_TIMEOUT      5*HZ
-- 
2.39.2