From: Tony Luck <tony.luck@intel.com>
To: Borislav Petkov <bp@alien8.de>
Cc: Yazen Ghannam <yazen.ghannam@amd.com>,
Smita.KoralahalliChannabasappa@amd.com,
dave.hansen@linux.intel.com, x86@kernel.org,
linux-edac@vger.kernel.org, linux-kernel@vger.kernel.org,
patches@lists.linux.dev, Tony Luck <tony.luck@intel.com>
Subject: [PATCH v4 2/5] x86/mce: Add per-bank CMCI storm mitigation
Date: Mon, 3 Apr 2023 14:07:13 -0700 [thread overview]
Message-ID: <20230403210716.347773-3-tony.luck@intel.com> (raw)
In-Reply-To: <20230403210716.347773-1-tony.luck@intel.com>
Add a hook into machine_check_poll() to keep track of per-CPU, per-bank
corrected error logs.
Maintain a bitmap history for each bank showing whether the bank
logged an corrected error or not each time it is polled.
In normal operation the interval between polls of this banks
determines how far to shift the history. The 64 bit width corresponds
to about one second.
When a storm is observed the Rate of interrupts is reduced by setting
a large threshold value for this bank in IA32_MCi_CTL2. This bank is
added to the bitmap of banks for this CPU to poll. The polling rate
is increased to once per second.
During a storm each bit in the history indicates the status of the
bank each time it is polled. Thus the history covers just over a minute.
Declare a storm for that bank if the number of corrected interrupts
seen in that history is above some threshold (5 in this RFC code for
ease of testing, likely move to 15 for compatibility with previous
storm detection).
A storm on a bank ends if enough consecutive polls of the bank show
no corrected errors (currently 30, may also change). That resets the
threshold in IA32_MCi_CTL2 back to 1, removes the bank from the bitmap
for polling, and changes the polling rate back to the default.
If a CPU with banks in storm mode is taken offline, the new CPU
that inherits ownership of those banks takes over management of
storm(s) in the inherited bank(s).
Signed-off-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Yazen Ghannam <yazen.ghannam@amd.com>
Tested-by: Yazen Ghannam <yazen.ghannam@amd.com>
---
arch/x86/kernel/cpu/mce/internal.h | 4 +-
arch/x86/kernel/cpu/mce/core.c | 26 ++++--
arch/x86/kernel/cpu/mce/intel.c | 139 ++++++++++++++++++++++++++++-
3 files changed, 158 insertions(+), 11 deletions(-)
diff --git a/arch/x86/kernel/cpu/mce/internal.h b/arch/x86/kernel/cpu/mce/internal.h
index f9331c6229b4..8d3a740a66ff 100644
--- a/arch/x86/kernel/cpu/mce/internal.h
+++ b/arch/x86/kernel/cpu/mce/internal.h
@@ -40,6 +40,8 @@ struct dentry *mce_get_debugfs_dir(void);
extern mce_banks_t mce_banks_ce_disabled;
+void track_cmci_storm(int bank, u64 status);
+
#ifdef CONFIG_X86_MCE_INTEL
void cmci_disable_bank(int bank);
void intel_init_cmci(void);
@@ -54,7 +56,7 @@ static inline void intel_clear_lmce(void) { }
static inline bool intel_filter_mce(struct mce *m) { return false; }
#endif
-void mce_timer_kick(unsigned long interval);
+void mce_timer_kick(bool storm);
#ifdef CONFIG_ACPI_APEI
int apei_write_mce(struct mce *m);
diff --git a/arch/x86/kernel/cpu/mce/core.c b/arch/x86/kernel/cpu/mce/core.c
index e7936be84204..20347eb65b8b 100644
--- a/arch/x86/kernel/cpu/mce/core.c
+++ b/arch/x86/kernel/cpu/mce/core.c
@@ -680,6 +680,8 @@ bool machine_check_poll(enum mcp_flags flags, mce_banks_t *b)
barrier();
m.status = mce_rdmsrl(mca_msr_reg(i, MCA_STATUS));
+ track_cmci_storm(i, m.status);
+
/* If this entry is not valid, ignore it */
if (!(m.status & MCI_STATUS_VAL))
continue;
@@ -1587,6 +1589,7 @@ static unsigned long check_interval = INITIAL_CHECK_INTERVAL;
static DEFINE_PER_CPU(unsigned long, mce_next_interval); /* in jiffies */
static DEFINE_PER_CPU(struct timer_list, mce_timer);
+static DEFINE_PER_CPU(bool, storm_poll_mode);
static void __start_timer(struct timer_list *t, unsigned long interval)
{
@@ -1622,22 +1625,29 @@ static void mce_timer_fn(struct timer_list *t)
else
iv = min(iv * 2, round_jiffies_relative(check_interval * HZ));
- __this_cpu_write(mce_next_interval, iv);
- __start_timer(t, iv);
+ if (__this_cpu_read(storm_poll_mode)) {
+ __start_timer(t, HZ);
+ } else {
+ __this_cpu_write(mce_next_interval, iv);
+ __start_timer(t, iv);
+ }
}
/*
- * Ensure that the timer is firing in @interval from now.
+ * When a storm starts on any bank on this CPU, switch to polling
+ * once per second. When the storm ends, revert to the default
+ * polling interval.
*/
-void mce_timer_kick(unsigned long interval)
+void mce_timer_kick(bool storm)
{
struct timer_list *t = this_cpu_ptr(&mce_timer);
- unsigned long iv = __this_cpu_read(mce_next_interval);
- __start_timer(t, interval);
+ __this_cpu_write(storm_poll_mode, storm);
- if (interval < iv)
- __this_cpu_write(mce_next_interval, interval);
+ if (storm)
+ __start_timer(t, HZ);
+ else
+ __this_cpu_write(mce_next_interval, check_interval * HZ);
}
/* Must not be called in IRQ context where del_timer_sync() can deadlock */
diff --git a/arch/x86/kernel/cpu/mce/intel.c b/arch/x86/kernel/cpu/mce/intel.c
index 052bf2708391..4106877de028 100644
--- a/arch/x86/kernel/cpu/mce/intel.c
+++ b/arch/x86/kernel/cpu/mce/intel.c
@@ -47,8 +47,40 @@ static DEFINE_PER_CPU(mce_banks_t, mce_banks_owned);
*/
static DEFINE_RAW_SPINLOCK(cmci_discover_lock);
+/*
+ * CMCI storm tracking state
+ * stormy_bank_count: per-cpu count of MC banks in storm state
+ * bank_history: bitmask tracking of corrected errors seen in each bank
+ * bank_time_stamp: last time (in jiffies) that each bank was polled
+ * cmci_threshold: MCi_CTL2 threshold for each bank when there is no storm
+ */
+static DEFINE_PER_CPU(int, stormy_bank_count);
+static DEFINE_PER_CPU(u64 [MAX_NR_BANKS], bank_history);
+static DEFINE_PER_CPU(bool [MAX_NR_BANKS], bank_storm);
+static DEFINE_PER_CPU(unsigned long [MAX_NR_BANKS], bank_time_stamp);
+static int cmci_threshold[MAX_NR_BANKS];
+
+/* Linux non-storm CMCI threshold (may be overridden by BIOS */
#define CMCI_THRESHOLD 1
+/*
+ * High threshold to limit CMCI rate during storms. Max supported is
+ * 0x7FFF. Use this slightly smaller value so it has a distinctive
+ * signature when some asks "Why am I not seeing all corrected errors?"
+ */
+#define CMCI_STORM_THRESHOLD 32749
+
+/*
+ * How many errors within the history buffer mark the start of a storm
+ */
+#define STORM_BEGIN_THRESHOLD 5
+
+/*
+ * How many polls of machine check bank without an error before declaring
+ * the storm is over
+ */
+#define STORM_END_POLL_THRESHOLD 30
+
static int cmci_supported(int *banks)
{
u64 cap;
@@ -103,6 +135,93 @@ static bool lmce_supported(void)
return tmp & FEAT_CTL_LMCE_ENABLED;
}
+/*
+ * Set a new CMCI threshold value. Preserve the state of the
+ * MCI_CTL2_CMCI_EN bit in case this happens during a
+ * cmci_rediscover() operation.
+ */
+static void cmci_set_threshold(int bank, int thresh)
+{
+ unsigned long flags;
+ u64 val;
+
+ raw_spin_lock_irqsave(&cmci_discover_lock, flags);
+ rdmsrl(MSR_IA32_MCx_CTL2(bank), val);
+ val &= ~MCI_CTL2_CMCI_THRESHOLD_MASK;
+ wrmsrl(MSR_IA32_MCx_CTL2(bank), val | thresh);
+ raw_spin_unlock_irqrestore(&cmci_discover_lock, flags);
+}
+
+static void cmci_storm_begin(int bank)
+{
+ __set_bit(bank, this_cpu_ptr(mce_poll_banks));
+ this_cpu_write(bank_storm[bank], true);
+
+ /*
+ * If this is the first bank on this CPU to enter storm mode
+ * start polling
+ */
+ if (this_cpu_inc_return(stormy_bank_count) == 1)
+ mce_timer_kick(true);
+}
+
+static void cmci_storm_end(int bank)
+{
+ __clear_bit(bank, this_cpu_ptr(mce_poll_banks));
+ this_cpu_write(bank_history[bank], 0ull);
+ this_cpu_write(bank_storm[bank], false);
+
+ /* If no banks left in storm mode, stop polling */
+ if (!this_cpu_dec_return(stormy_bank_count))
+ mce_timer_kick(false);
+}
+
+void track_cmci_storm(int bank, u64 status)
+{
+ unsigned long now = jiffies, delta;
+ unsigned int shift = 1;
+ u64 history;
+
+ /*
+ * When a bank is in storm mode it is polled once per second and
+ * the history mask will record about the last minute of poll results.
+ * If it is not in storm mode, then the bank is only checked when
+ * there is a CMCI interrupt. Check how long it has been since
+ * this bank was last checked, and adjust the amount of "shift"
+ * to apply to history.
+ */
+ if (!this_cpu_read(bank_storm[bank])) {
+ delta = now - this_cpu_read(bank_time_stamp[bank]);
+ shift = (delta + HZ) / HZ;
+ }
+
+ /* If has been a long time since the last poll, clear history */
+ if (shift >= 64)
+ history = 0;
+ else
+ history = this_cpu_read(bank_history[bank]) << shift;
+ this_cpu_write(bank_time_stamp[bank], now);
+
+ /* History keeps track of corrected errors. VAL=1 && UC=0 */
+ if ((status & (MCI_STATUS_VAL | MCI_STATUS_UC)) == MCI_STATUS_VAL)
+ history |= 1;
+ this_cpu_write(bank_history[bank], history);
+
+ if (this_cpu_read(bank_storm[bank])) {
+ if (history & GENMASK_ULL(STORM_END_POLL_THRESHOLD - 1, 0))
+ return;
+ pr_notice("CPU%d BANK%d CMCI storm subsided\n", smp_processor_id(), bank);
+ cmci_set_threshold(bank, cmci_threshold[bank]);
+ cmci_storm_end(bank);
+ } else {
+ if (hweight64(history) < STORM_BEGIN_THRESHOLD)
+ return;
+ pr_notice("CPU%d BANK%d CMCI storm detected\n", smp_processor_id(), bank);
+ cmci_set_threshold(bank, CMCI_STORM_THRESHOLD);
+ cmci_storm_begin(bank);
+ }
+}
+
/*
* The interrupt handler. This is called on every event.
* Just call the poller directly to log any events.
@@ -147,6 +266,9 @@ static void cmci_discover(int banks)
continue;
}
+ if ((val & MCI_CTL2_CMCI_THRESHOLD_MASK) == CMCI_STORM_THRESHOLD)
+ goto storm;
+
if (!mca_cfg.bios_cmci_threshold) {
val &= ~MCI_CTL2_CMCI_THRESHOLD_MASK;
val |= CMCI_THRESHOLD;
@@ -159,7 +281,7 @@ static void cmci_discover(int banks)
bios_zero_thresh = 1;
val |= CMCI_THRESHOLD;
}
-
+storm:
val |= MCI_CTL2_CMCI_EN;
wrmsrl(MSR_IA32_MCx_CTL2(i), val);
rdmsrl(MSR_IA32_MCx_CTL2(i), val);
@@ -167,7 +289,14 @@ static void cmci_discover(int banks)
/* Did the enable bit stick? -- the bank supports CMCI */
if (val & MCI_CTL2_CMCI_EN) {
set_bit(i, owned);
- __clear_bit(i, this_cpu_ptr(mce_poll_banks));
+ if ((val & MCI_CTL2_CMCI_THRESHOLD_MASK) == CMCI_STORM_THRESHOLD) {
+ pr_notice("CPU%d BANK%d CMCI inherited storm\n", smp_processor_id(), i);
+ this_cpu_write(bank_history[i], ~0ull);
+ this_cpu_write(bank_time_stamp[i], jiffies);
+ cmci_storm_begin(i);
+ } else {
+ __clear_bit(i, this_cpu_ptr(mce_poll_banks));
+ }
/*
* We are able to set thresholds for some banks that
* had a threshold of 0. This means the BIOS has not
@@ -177,6 +306,10 @@ static void cmci_discover(int banks)
if (mca_cfg.bios_cmci_threshold && bios_zero_thresh &&
(val & MCI_CTL2_CMCI_THRESHOLD_MASK))
bios_wrong_thresh = 1;
+
+ /* Save default threshold for each bank */
+ if (cmci_threshold[i] == 0)
+ cmci_threshold[i] = val & MCI_CTL2_CMCI_THRESHOLD_MASK;
} else {
WARN_ON(!test_bit(i, this_cpu_ptr(mce_poll_banks)));
}
@@ -218,6 +351,8 @@ static void __cmci_disable_bank(int bank)
val &= ~MCI_CTL2_CMCI_EN;
wrmsrl(MSR_IA32_MCx_CTL2(bank), val);
__clear_bit(bank, this_cpu_ptr(mce_banks_owned));
+ if ((val & MCI_CTL2_CMCI_THRESHOLD_MASK) == CMCI_STORM_THRESHOLD)
+ cmci_storm_end(bank);
}
/*
--
2.39.2
next prev parent reply other threads:[~2023-04-03 21:07 UTC|newest]
Thread overview: 88+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <YrFSSZqjtWlm9rUr@agluck-desk3.sc.intel.com>
2022-06-27 17:36 ` [PATCH v2 0/5] Handle corrected machine check interrupt storms Tony Luck
2022-06-27 17:36 ` [PATCH v2 1/5] x86/mce: Remove old CMCI storm mitigation code Tony Luck
2022-06-27 17:36 ` [PATCH v2 2/5] x86/mce: Add per-bank CMCI storm mitigation Tony Luck
2022-06-27 17:36 ` [PATCH v2 3/5] x86/mce: Introduce mce_handle_storm() to deal with begin/end of storms Tony Luck
2022-06-27 17:36 ` [PATCH v2 4/5] x86/mce: Move storm handling to core Tony Luck
2022-06-27 17:36 ` [PATCH v2 5/5] x86/mce: Handle AMD threshold interrupt storms Tony Luck
2023-03-17 14:50 ` [PATCH v2 0/5] Handle corrected machine check " Yazen Ghannam
2023-03-17 17:20 ` [PATCH v3 " Tony Luck
2023-03-17 17:20 ` [PATCH v3 1/5] x86/mce: Remove old CMCI storm mitigation code Tony Luck
2023-03-17 17:20 ` [PATCH v3 2/5] x86/mce: Add per-bank CMCI storm mitigation Tony Luck
2023-03-17 17:20 ` [PATCH v3 3/5] x86/mce: Introduce mce_handle_storm() to deal with begin/end of storms Tony Luck
2023-03-23 15:22 ` Yazen Ghannam
2023-03-23 18:00 ` Tony Luck
2023-03-17 17:20 ` [PATCH v3 4/5] x86/mce: Move storm handling to core Tony Luck
2023-03-23 15:27 ` Yazen Ghannam
2023-03-23 18:10 ` Luck, Tony
2023-03-23 20:26 ` Luck, Tony
2023-03-24 20:44 ` Yazen Ghannam
2023-03-29 15:26 ` Yazen Ghannam
2023-04-03 19:03 ` Luck, Tony
2023-04-03 21:07 ` [PATCH v4 0/5] Handle corrected machine check interrupt storms Tony Luck
2023-04-03 21:07 ` [PATCH v4 1/5] x86/mce: Remove old CMCI storm mitigation code Tony Luck
2023-04-03 21:07 ` Tony Luck [this message]
2023-04-11 12:32 ` [PATCH v4 2/5] x86/mce: Add per-bank CMCI storm mitigation Borislav Petkov
2023-04-11 14:06 ` Yazen Ghannam
2023-04-11 16:06 ` Luck, Tony
2023-04-11 17:17 ` Borislav Petkov
2023-04-03 21:07 ` [PATCH v4 3/5] x86/mce: Introduce mce_handle_storm() to deal with begin/end of storms Tony Luck
2023-04-03 21:07 ` [PATCH v4 4/5] x86/mce: Move storm handling to core Tony Luck
2023-04-03 21:07 ` [PATCH v4 5/5] x86/mce: Handle AMD threshold interrupt storms Tony Luck
2023-04-11 17:38 ` [PATCH v5 0/5] Handle corrected machine check " Tony Luck
2023-04-11 17:38 ` [PATCH v5 1/5] x86/mce: Remove old CMCI storm mitigation code Tony Luck
2023-04-11 17:38 ` [PATCH v5 2/5] x86/mce: Add per-bank CMCI storm mitigation Tony Luck
2023-06-13 17:45 ` Borislav Petkov
2023-06-16 18:15 ` Tony Luck
2023-04-11 17:38 ` [PATCH v5 3/5] x86/mce: Introduce mce_handle_storm() to deal with begin/end of storms Tony Luck
2023-04-11 17:38 ` [PATCH v5 4/5] x86/mce: Move storm handling to core Tony Luck
2023-04-11 17:38 ` [PATCH v5 5/5] x86/mce: Handle AMD threshold interrupt storms Tony Luck
2023-06-16 18:27 ` [PATCH v6 0/4] Handle corrected machine check " Tony Luck
2023-06-16 18:27 ` [PATCH v6 1/4] x86/mce: Remove old CMCI storm mitigation code Tony Luck
2023-06-16 18:27 ` [PATCH v6 2/4] x86/mce: Add per-bank CMCI storm mitigation Tony Luck
2023-06-23 12:09 ` Borislav Petkov
2023-06-23 15:40 ` Luck, Tony
2023-07-17 8:58 ` Borislav Petkov
2023-06-16 18:27 ` [PATCH v6 3/4] x86/mce: Handle AMD threshold interrupt storms Tony Luck
2023-06-23 14:45 ` Borislav Petkov
2023-06-23 15:54 ` Yazen Ghannam
2023-06-16 18:27 ` [PATCH v6 4/4] x86/mce: Handle Intel " Tony Luck
2023-07-18 21:08 ` [PATCH v7 0/3] Handle corrected machine check " Tony Luck
2023-07-18 21:08 ` [PATCH v7 1/3] x86/mce: Remove old CMCI storm mitigation code Tony Luck
2023-07-18 21:08 ` [PATCH v7 2/3] x86/mce: Add per-bank CMCI storm mitigation Tony Luck
2023-09-19 17:44 ` Yazen Ghannam
2023-09-20 15:56 ` Yazen Ghannam
2023-09-20 16:09 ` Luck, Tony
2023-07-18 21:08 ` [PATCH v7 3/3] x86/mce: Handle Intel threshold interrupt storms Tony Luck
2023-09-19 17:59 ` Yazen Ghannam
2023-09-29 18:16 ` [PATCH v8 0/3] Handle corrected machine check " Tony Luck
2023-09-29 18:16 ` [PATCH v8 1/3] x86/mce: Remove old CMCI storm mitigation code Tony Luck
2023-09-29 18:16 ` [PATCH v8 2/3] x86/mce: Add per-bank CMCI storm mitigation Tony Luck
2023-09-29 18:16 ` [PATCH v8 3/3] x86/mce: Handle Intel threshold interrupt storms Tony Luck
2023-10-02 17:57 ` [PATCH v8 0/3] Handle corrected machine check " Luck, Tony
2023-10-04 18:36 ` [PATCH v9 " Tony Luck
2023-10-04 18:36 ` [PATCH v9 1/3] x86/mce: Remove old CMCI storm mitigation code Tony Luck
2023-10-04 18:36 ` [PATCH v9 2/3] x86/mce: Add per-bank CMCI storm mitigation Tony Luck
2023-10-11 9:11 ` kernel test robot
2023-10-11 15:16 ` Luck, Tony
2023-10-11 15:42 ` Feng Tang
2023-10-11 17:23 ` Luck, Tony
2023-10-12 5:36 ` Feng Tang
2023-10-12 5:56 ` Feng Tang
2023-10-12 2:35 ` Philip Li
2023-10-19 15:12 ` Borislav Petkov
2023-10-23 18:14 ` Tony Luck
2023-11-14 19:23 ` Borislav Petkov
2023-11-14 22:04 ` Tony Luck
2023-11-21 11:54 ` Borislav Petkov
2023-11-27 19:50 ` Tony Luck
2023-11-27 20:14 ` Tony Luck
2023-11-28 0:42 ` Tony Luck
2023-11-28 15:32 ` Yazen Ghannam
2023-12-14 16:58 ` Borislav Petkov
2023-12-14 18:03 ` Luck, Tony
2023-10-04 18:36 ` [PATCH v9 3/3] x86/mce: Handle Intel threshold interrupt storms Tony Luck
2023-11-15 19:54 ` [PATCH v10 0/3] Handle corrected machine check " Tony Luck
2023-11-15 19:54 ` [PATCH v10 1/3] x86/mce: Remove old CMCI storm mitigation code Tony Luck
2023-11-15 19:54 ` [PATCH v10 2/3] x86/mce: Add per-bank CMCI storm mitigation Tony Luck
2023-11-15 19:54 ` [PATCH v10 3/3] x86/mce: Handle Intel threshold interrupt storms Tony Luck
2023-03-17 17:20 ` [PATCH v3 5/5] x86/mce: Handle AMD " Tony Luck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230403210716.347773-3-tony.luck@intel.com \
--to=tony.luck@intel.com \
--cc=Smita.KoralahalliChannabasappa@amd.com \
--cc=bp@alien8.de \
--cc=dave.hansen@linux.intel.com \
--cc=linux-edac@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=patches@lists.linux.dev \
--cc=x86@kernel.org \
--cc=yazen.ghannam@amd.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).