[PATCH 6.1 056/164] cxl/pci: Fix CDAT retrieval on big endian

[Greg Kroah-Hartman <gregkh@linuxfoundation.org>]

From: Lukas Wunner <lukas@wunner.de>

commit fbaa38214cd9e150764ccaa82e04ecf42cc1140c upstream.

The CDAT exposed in sysfs differs between little endian and big endian
arches:  On big endian, every 4 bytes are byte-swapped.

PCI Configuration Space is little endian (PCI r3.0 sec 6.1).  Accessors
such as pci_read_config_dword() implicitly swap bytes on big endian.
That way, the macros in include/uapi/linux/pci_regs.h work regardless of
the arch's endianness.  For an example of implicit byte-swapping, see
ppc4xx_pciex_read_config(), which calls in_le32(), which uses lwbrx
(Load Word Byte-Reverse Indexed).

DOE Read/Write Data Mailbox Registers are unlike other registers in
Configuration Space in that they contain or receive a 4 byte portion of
an opaque byte stream (a "Data Object" per PCIe r6.0 sec 7.9.24.5f).
They need to be copied to or from the request/response buffer verbatim.
So amend pci_doe_send_req() and pci_doe_recv_resp() to undo the implicit
byte-swapping.

The CXL_DOE_TABLE_ACCESS_* and PCI_DOE_DATA_OBJECT_DISC_* macros assume
implicit byte-swapping.  Byte-swap requests after constructing them with
those macros and byte-swap responses before parsing them.

Change the request and response type to __le32 to avoid sparse warnings.
Per a request from Jonathan, replace sizeof(u32) with sizeof(__le32) for
consistency.

Fixes: c97006046c79 ("cxl/port: Read CDAT table")
Tested-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Cc: stable@vger.kernel.org # v6.0+
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/3051114102f41d19df3debbee123129118fc5e6d.1678543498.git.lukas@wunner.de
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/cxl/core/pci.c  |   26 +++++++++++++-------------
 drivers/pci/doe.c       |   25 ++++++++++++++-----------
 include/linux/pci-doe.h |    8 ++++++--
 3 files changed, 33 insertions(+), 26 deletions(-)

--- a/drivers/cxl/core/pci.c
+++ b/drivers/cxl/core/pci.c
@@ -483,7 +483,7 @@ static struct pci_doe_mb *find_cdat_doe(
 	return NULL;
 }
 
-#define CDAT_DOE_REQ(entry_handle)					\
+#define CDAT_DOE_REQ(entry_handle) cpu_to_le32				\
 	(FIELD_PREP(CXL_DOE_TABLE_ACCESS_REQ_CODE,			\
 		    CXL_DOE_TABLE_ACCESS_REQ_CODE_READ) |		\
 	 FIELD_PREP(CXL_DOE_TABLE_ACCESS_TABLE_TYPE,			\
@@ -496,8 +496,8 @@ static void cxl_doe_task_complete(struct
 }
 
 struct cdat_doe_task {
-	u32 request_pl;
-	u32 response_pl[32];
+	__le32 request_pl;
+	__le32 response_pl[32];
 	struct completion c;
 	struct pci_doe_task task;
 };
@@ -531,10 +531,10 @@ static int cxl_cdat_get_length(struct de
 		return rc;
 	}
 	wait_for_completion(&t.c);
-	if (t.task.rv < sizeof(u32))
+	if (t.task.rv < sizeof(__le32))
 		return -EIO;
 
-	*length = t.response_pl[1];
+	*length = le32_to_cpu(t.response_pl[1]);
 	dev_dbg(dev, "CDAT length %zu\n", *length);
 
 	return 0;
@@ -545,13 +545,13 @@ static int cxl_cdat_read_table(struct de
 			       struct cxl_cdat *cdat)
 {
 	size_t length = cdat->length;
-	u32 *data = cdat->table;
+	__le32 *data = cdat->table;
 	int entry_handle = 0;
 
 	do {
 		DECLARE_CDAT_DOE_TASK(CDAT_DOE_REQ(entry_handle), t);
 		size_t entry_dw;
-		u32 *entry;
+		__le32 *entry;
 		int rc;
 
 		rc = pci_doe_submit_task(cdat_doe, &t.task);
@@ -561,21 +561,21 @@ static int cxl_cdat_read_table(struct de
 		}
 		wait_for_completion(&t.c);
 		/* 1 DW header + 1 DW data min */
-		if (t.task.rv < (2 * sizeof(u32)))
+		if (t.task.rv < (2 * sizeof(__le32)))
 			return -EIO;
 
 		/* Get the CXL table access header entry handle */
 		entry_handle = FIELD_GET(CXL_DOE_TABLE_ACCESS_ENTRY_HANDLE,
-					 t.response_pl[0]);
+					 le32_to_cpu(t.response_pl[0]));
 		entry = t.response_pl + 1;
-		entry_dw = t.task.rv / sizeof(u32);
+		entry_dw = t.task.rv / sizeof(__le32);
 		/* Skip Header */
 		entry_dw -= 1;
-		entry_dw = min(length / sizeof(u32), entry_dw);
+		entry_dw = min(length / sizeof(__le32), entry_dw);
 		/* Prevent length < 1 DW from causing a buffer overflow */
 		if (entry_dw) {
-			memcpy(data, entry, entry_dw * sizeof(u32));
-			length -= entry_dw * sizeof(u32);
+			memcpy(data, entry, entry_dw * sizeof(__le32));
+			length -= entry_dw * sizeof(__le32);
 			data += entry_dw;
 		}
 	} while (entry_handle != CXL_DOE_TABLE_ACCESS_LAST_ENTRY);
--- a/drivers/pci/doe.c
+++ b/drivers/pci/doe.c
@@ -128,7 +128,7 @@ static int pci_doe_send_req(struct pci_d
 		return -EIO;
 
 	/* Length is 2 DW of header + length of payload in DW */
-	length = 2 + task->request_pl_sz / sizeof(u32);
+	length = 2 + task->request_pl_sz / sizeof(__le32);
 	if (length > PCI_DOE_MAX_LENGTH)
 		return -EIO;
 	if (length == PCI_DOE_MAX_LENGTH)
@@ -141,9 +141,9 @@ static int pci_doe_send_req(struct pci_d
 	pci_write_config_dword(pdev, offset + PCI_DOE_WRITE,
 			       FIELD_PREP(PCI_DOE_DATA_OBJECT_HEADER_2_LENGTH,
 					  length));
-	for (i = 0; i < task->request_pl_sz / sizeof(u32); i++)
+	for (i = 0; i < task->request_pl_sz / sizeof(__le32); i++)
 		pci_write_config_dword(pdev, offset + PCI_DOE_WRITE,
-				       task->request_pl[i]);
+				       le32_to_cpu(task->request_pl[i]));
 
 	pci_doe_write_ctrl(doe_mb, PCI_DOE_CTRL_GO);
 
@@ -195,11 +195,11 @@ static int pci_doe_recv_resp(struct pci_
 
 	/* First 2 dwords have already been read */
 	length -= 2;
-	payload_length = min(length, task->response_pl_sz / sizeof(u32));
+	payload_length = min(length, task->response_pl_sz / sizeof(__le32));
 	/* Read the rest of the response payload */
 	for (i = 0; i < payload_length; i++) {
-		pci_read_config_dword(pdev, offset + PCI_DOE_READ,
-				      &task->response_pl[i]);
+		pci_read_config_dword(pdev, offset + PCI_DOE_READ, &val);
+		task->response_pl[i] = cpu_to_le32(val);
 		/* Prior to the last ack, ensure Data Object Ready */
 		if (i == (payload_length - 1) && !pci_doe_data_obj_ready(doe_mb))
 			return -EIO;
@@ -217,7 +217,7 @@ static int pci_doe_recv_resp(struct pci_
 	if (FIELD_GET(PCI_DOE_STATUS_ERROR, val))
 		return -EIO;
 
-	return min(length, task->response_pl_sz / sizeof(u32)) * sizeof(u32);
+	return min(length, task->response_pl_sz / sizeof(__le32)) * sizeof(__le32);
 }
 
 static void signal_task_complete(struct pci_doe_task *task, int rv)
@@ -317,14 +317,16 @@ static int pci_doe_discovery(struct pci_
 {
 	u32 request_pl = FIELD_PREP(PCI_DOE_DATA_OBJECT_DISC_REQ_3_INDEX,
 				    *index);
+	__le32 request_pl_le = cpu_to_le32(request_pl);
+	__le32 response_pl_le;
 	u32 response_pl;
 	DECLARE_COMPLETION_ONSTACK(c);
 	struct pci_doe_task task = {
 		.prot.vid = PCI_VENDOR_ID_PCI_SIG,
 		.prot.type = PCI_DOE_PROTOCOL_DISCOVERY,
-		.request_pl = &request_pl,
+		.request_pl = &request_pl_le,
 		.request_pl_sz = sizeof(request_pl),
-		.response_pl = &response_pl,
+		.response_pl = &response_pl_le,
 		.response_pl_sz = sizeof(response_pl),
 		.complete = pci_doe_task_complete,
 		.private = &c,
@@ -340,6 +342,7 @@ static int pci_doe_discovery(struct pci_
 	if (task.rv != sizeof(response_pl))
 		return -EIO;
 
+	response_pl = le32_to_cpu(response_pl_le);
 	*vid = FIELD_GET(PCI_DOE_DATA_OBJECT_DISC_RSP_3_VID, response_pl);
 	*protocol = FIELD_GET(PCI_DOE_DATA_OBJECT_DISC_RSP_3_PROTOCOL,
 			      response_pl);
@@ -533,8 +536,8 @@ int pci_doe_submit_task(struct pci_doe_m
 	 * DOE requests must be a whole number of DW and the response needs to
 	 * be big enough for at least 1 DW
 	 */
-	if (task->request_pl_sz % sizeof(u32) ||
-	    task->response_pl_sz < sizeof(u32))
+	if (task->request_pl_sz % sizeof(__le32) ||
+	    task->response_pl_sz < sizeof(__le32))
 		return -EINVAL;
 
 	if (test_bit(PCI_DOE_FLAG_DEAD, &doe_mb->flags))
--- a/include/linux/pci-doe.h
+++ b/include/linux/pci-doe.h
@@ -34,6 +34,10 @@ struct pci_doe_mb;
  * @work: Used internally by the mailbox
  * @doe_mb: Used internally by the mailbox
  *
+ * Payloads are treated as opaque byte streams which are transmitted verbatim,
+ * without byte-swapping.  If payloads contain little-endian register values,
+ * the caller is responsible for conversion with cpu_to_le32() / le32_to_cpu().
+ *
  * The payload sizes and rv are specified in bytes with the following
  * restrictions concerning the protocol.
  *
@@ -45,9 +49,9 @@ struct pci_doe_mb;
  */
 struct pci_doe_task {
 	struct pci_doe_protocol prot;
-	u32 *request_pl;
+	__le32 *request_pl;
 	size_t request_pl_sz;
-	u32 *response_pl;
+	__le32 *response_pl;
 	size_t response_pl_sz;
 	int rv;
 	void (*complete)(struct pci_doe_task *task);