From mboxrd@z Thu Jan 1 00:00:00 1970 Received: from smtp.kernel.org (aws-us-west-2-korg-mail-1.web.codeaurora.org [10.30.226.201]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id E3D378F55 for ; Sun, 16 Jul 2023 20:39:49 +0000 (UTC) Received: by smtp.kernel.org (Postfix) with ESMTPSA id 65CB5C433C7; Sun, 16 Jul 2023 20:39:49 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=linuxfoundation.org; s=korg; t=1689539989; bh=coVrhg8Qr0Gk6SHK5yF3H/T18HAzhoyj69Gtq8o0nSc=; h=From:To:Cc:Subject:Date:In-Reply-To:References:From; b=dSFk6KUc6tNmwB8xrWiGYJgtNUGiX8bQkbrb6lmhQMGBjU4jTGdaIvv9P1h9cakHS 3yw87xDAHoUCJm8LLc6oomR9B7b2w73ueMk63uZQrVdGfg5RCXHEq8K2DFCJZjFVD2 PiuIARyRHJabjVn5oVdKaSoAAmqvhw6btEO7y5QY= From: Greg Kroah-Hartman To: stable@vger.kernel.org Cc: Greg Kroah-Hartman , patches@lists.linux.dev, Srinivas Kandagatla , Stephan Gerhold , Bjorn Andersson , Sasha Levin Subject: [PATCH 6.1 204/591] arm64: dts: qcom: apq8016-sbc: Fix 1.8V power rail on LS expansion Date: Sun, 16 Jul 2023 21:45:43 +0200 Message-ID: <20230716194929.147184701@linuxfoundation.org> X-Mailer: git-send-email 2.41.0 In-Reply-To: <20230716194923.861634455@linuxfoundation.org> References: <20230716194923.861634455@linuxfoundation.org> User-Agent: quilt/0.67 Precedence: bulk X-Mailing-List: patches@lists.linux.dev List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit From: Stephan Gerhold [ Upstream commit 5500f823db38db073d30557af159b77fb1f2bf26 ] The 96Boards specification expects a 1.8V power rail on the low-speed expansion connector that is able to provide at least 0.18W / 100 mA. According to the DB410c hardware user manual this is done by connecting both L15 and L16 in parallel with up to 55mA each (for 110 mA total) [1]. Unfortunately the current regulator setup in the DB410c device tree does not implement the specification correctly and only provides 5 mA: - Only L15 is marked always-on, so L16 is never enabled. - Without specifying a load the regulator is put into LPM where it can only provide 5 mA. Fix this by: - Adding proper voltage constraints for L16. - Making L16 always-on. - Adding regulator-system-load for both L15 and L16. 100 mA should be available in total, so specify 50 mA for each. (The regulator hardware can only be in normal (55 mA) or low-power mode (5 mA) so this will actually result in the expected 110 mA total...) [1]: https://www.96boards.org/documentation/consumer/dragonboard/dragonboard410c/hardware-docs/hardware-user-manual.md.html#power-supplies Cc: Srinivas Kandagatla Fixes: 828dd5d66f0f ("arm64: dts: apq8016-sbc: make 1.8v available on LS expansion") Signed-off-by: Stephan Gerhold Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20230510-msm8916-regulators-v1-2-54d4960a05fc@gerhold.net Signed-off-by: Sasha Levin --- arch/arm64/boot/dts/qcom/apq8016-sbc.dts | 16 ++++++++++++---- 1 file changed, 12 insertions(+), 4 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dts b/arch/arm64/boot/dts/qcom/apq8016-sbc.dts index c6f4ee7b82042..e3e90ad92cc59 100644 --- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dts +++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dts @@ -527,19 +527,27 @@ l14 { regulator-max-microvolt = <3300000>; }; - /** - * 1.8v required on LS expansion - * for mezzanine boards + /* + * The 96Boards specification expects a 1.8V power rail on the low-speed + * expansion connector that is able to provide at least 0.18W / 100 mA. + * L15/L16 are connected in parallel to provide 55 mA each. A minimum load + * must be specified to ensure the regulators are not put in LPM where they + * would only provide 5 mA. */ l15 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; + regulator-system-load = <50000>; + regulator-allow-set-load; regulator-always-on; }; l16 { regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; + regulator-max-microvolt = <1800000>; + regulator-system-load = <50000>; + regulator-allow-set-load; + regulator-always-on; }; l17 { -- 2.39.2