From: Stephen Boyd <swboyd@chromium.org>
To: Rob Clark <robdclark@gmail.com>,
Abhinav Kumar <quic_abhinavk@quicinc.com>,
Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: linux-kernel@vger.kernel.org, patches@lists.linux.dev,
Sean Paul <sean@poorly.run>,
dri-devel@lists.freedesktop.org, freedreno@lists.freedesktop.org,
Vinod Polimera <quic_vpolimer@quicinc.com>,
Kuogee Hsieh <quic_khsieh@quicinc.com>
Subject: [PATCH 1/7] drm/msm/dp: Replace open-coded drm_dp_read_dpcd_caps()
Date: Tue, 29 Aug 2023 11:47:26 -0700 [thread overview]
Message-ID: <20230829184735.2841739-2-swboyd@chromium.org> (raw)
In-Reply-To: <20230829184735.2841739-1-swboyd@chromium.org>
This function duplicates the common function drm_dp_read_dpcd_caps().
The array of DPCD registers filled in is one size larger than the
function takes, but from what I can tell that extra byte was never used.
Resize the array and use the common function to reduce the code here.
Cc: Vinod Polimera <quic_vpolimer@quicinc.com>
Cc: Kuogee Hsieh <quic_khsieh@quicinc.com>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
---
drivers/gpu/drm/msm/dp/dp_panel.c | 42 ++++---------------------------
drivers/gpu/drm/msm/dp/dp_panel.h | 4 +--
2 files changed, 6 insertions(+), 40 deletions(-)
diff --git a/drivers/gpu/drm/msm/dp/dp_panel.c b/drivers/gpu/drm/msm/dp/dp_panel.c
index 42d52510ffd4..09d4f6c38ef8 100644
--- a/drivers/gpu/drm/msm/dp/dp_panel.c
+++ b/drivers/gpu/drm/msm/dp/dp_panel.c
@@ -48,47 +48,15 @@ static int dp_panel_read_dpcd(struct dp_panel *dp_panel)
ssize_t rlen;
struct dp_panel_private *panel;
struct dp_link_info *link_info;
- u8 *dpcd, major = 0, minor = 0, temp;
- u32 offset = DP_DPCD_REV;
+ u8 *dpcd, major, minor;
+ panel = container_of(dp_panel, struct dp_panel_private, dp_panel);
dpcd = dp_panel->dpcd;
+ rc = drm_dp_read_dpcd_caps(panel->aux, dpcd);
+ if (rc)
+ return rc;
- panel = container_of(dp_panel, struct dp_panel_private, dp_panel);
link_info = &dp_panel->link_info;
-
- rlen = drm_dp_dpcd_read(panel->aux, offset,
- dpcd, (DP_RECEIVER_CAP_SIZE + 1));
- if (rlen < (DP_RECEIVER_CAP_SIZE + 1)) {
- DRM_ERROR("dpcd read failed, rlen=%zd\n", rlen);
- if (rlen == -ETIMEDOUT)
- rc = rlen;
- else
- rc = -EINVAL;
-
- goto end;
- }
-
- temp = dpcd[DP_TRAINING_AUX_RD_INTERVAL];
-
- /* check for EXTENDED_RECEIVER_CAPABILITY_FIELD_PRESENT */
- if (temp & BIT(7)) {
- drm_dbg_dp(panel->drm_dev,
- "using EXTENDED_RECEIVER_CAPABILITY_FIELD\n");
- offset = DPRX_EXTENDED_DPCD_FIELD;
- }
-
- rlen = drm_dp_dpcd_read(panel->aux, offset,
- dpcd, (DP_RECEIVER_CAP_SIZE + 1));
- if (rlen < (DP_RECEIVER_CAP_SIZE + 1)) {
- DRM_ERROR("dpcd read failed, rlen=%zd\n", rlen);
- if (rlen == -ETIMEDOUT)
- rc = rlen;
- else
- rc = -EINVAL;
-
- goto end;
- }
-
link_info->revision = dpcd[DP_DPCD_REV];
major = (link_info->revision >> 4) & 0x0f;
minor = link_info->revision & 0x0f;
diff --git a/drivers/gpu/drm/msm/dp/dp_panel.h b/drivers/gpu/drm/msm/dp/dp_panel.h
index ed1030e17e1b..6d733480a62d 100644
--- a/drivers/gpu/drm/msm/dp/dp_panel.h
+++ b/drivers/gpu/drm/msm/dp/dp_panel.h
@@ -13,8 +13,6 @@
struct edid;
-#define DPRX_EXTENDED_DPCD_FIELD 0x2200
-
#define DP_DOWNSTREAM_PORTS 4
#define DP_DOWNSTREAM_CAP_SIZE 4
@@ -40,7 +38,7 @@ struct dp_panel_psr {
struct dp_panel {
/* dpcd raw data */
- u8 dpcd[DP_RECEIVER_CAP_SIZE + 1];
+ u8 dpcd[DP_RECEIVER_CAP_SIZE];
u8 ds_cap_info[DP_DOWNSTREAM_PORTS * DP_DOWNSTREAM_CAP_SIZE];
u32 ds_port_cnt;
u32 dfp_present;
--
https://chromeos.dev
next prev parent reply other threads:[~2023-08-29 18:47 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-08-29 18:47 [PATCH 0/7] drm/msm/dp: Simplify DPCD related code with helpers Stephen Boyd
2023-08-29 18:47 ` Stephen Boyd [this message]
2023-08-31 20:27 ` [PATCH 1/7] drm/msm/dp: Replace open-coded drm_dp_read_dpcd_caps() Kuogee Hsieh
2023-09-03 22:37 ` Dmitry Baryshkov
2023-08-29 18:47 ` [PATCH 2/7] drm/msm/dp: Use drm_dp_read_sink_count() helper Stephen Boyd
2023-08-31 20:27 ` Kuogee Hsieh
2023-09-03 22:37 ` Dmitry Baryshkov
2023-08-29 18:47 ` [PATCH 3/7] drm/msm/dp: Remove dead code related to downstream cap info Stephen Boyd
2023-08-31 20:28 ` Kuogee Hsieh
2023-08-31 20:28 ` Kuogee Hsieh
2023-09-03 22:39 ` Dmitry Baryshkov
2023-08-29 18:47 ` [PATCH 4/7] drm/msm/dp: Remove aux_cfg_update_done and related code Stephen Boyd
2023-08-31 20:28 ` Kuogee Hsieh
2023-09-03 22:39 ` Dmitry Baryshkov
2023-08-29 18:47 ` [PATCH 5/7] drm/msm/dp: Simplify with drm_dp_{max_link_rate,max_lane_count}() Stephen Boyd
2023-08-31 20:29 ` Kuogee Hsieh
2023-09-03 22:39 ` Dmitry Baryshkov
2023-08-29 18:47 ` [PATCH 6/7] drm/msm/dp: Inline dp_link_parse_sink_count() Stephen Boyd
2023-08-31 20:29 ` Kuogee Hsieh
2023-09-03 22:39 ` Dmitry Baryshkov
2023-08-29 18:47 ` [PATCH 7/7] drm/msm/dp: Remove dp_display_is_ds_bridge() Stephen Boyd
2023-08-31 20:29 ` Kuogee Hsieh
2023-09-03 22:40 ` Dmitry Baryshkov
2023-09-05 21:52 ` Stephen Boyd
2023-09-03 22:45 ` [PATCH 0/7] drm/msm/dp: Simplify DPCD related code with helpers Dmitry Baryshkov
2023-10-08 14:01 ` Dmitry Baryshkov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230829184735.2841739-2-swboyd@chromium.org \
--to=swboyd@chromium.org \
--cc=dmitry.baryshkov@linaro.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=freedreno@lists.freedesktop.org \
--cc=linux-kernel@vger.kernel.org \
--cc=patches@lists.linux.dev \
--cc=quic_abhinavk@quicinc.com \
--cc=quic_khsieh@quicinc.com \
--cc=quic_vpolimer@quicinc.com \
--cc=robdclark@gmail.com \
--cc=sean@poorly.run \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).