From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: stable@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
patches@lists.linux.dev, Martin Kohn <m.kohn@welotec.com>,
Johan Hovold <johan@kernel.org>
Subject: [PATCH 6.4 11/32] USB: serial: option: add Quectel EM05G variant (0x030e)
Date: Mon, 4 Sep 2023 19:30:09 +0100 [thread overview]
Message-ID: <20230904182948.405081224@linuxfoundation.org> (raw)
In-Reply-To: <20230904182947.899158313@linuxfoundation.org>
6.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Martin Kohn <m.kohn@welotec.com>
commit 873854c02364ebb991fc06f7148c14dfb5419e1b upstream.
Add Quectel EM05G with product ID 0x030e.
Interface 4 is used for qmi.
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=2c7c ProdID=030e Rev= 3.18
S: Manufacturer=Quectel
S: Product=Quectel EM05-G
C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms
E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
Signed-off-by: Martin Kohn <m.kohn@welotec.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/serial/option.c | 3 +++
1 file changed, 3 insertions(+)
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -259,6 +259,7 @@ static void option_instat_callback(struc
#define QUECTEL_PRODUCT_EM05G 0x030a
#define QUECTEL_PRODUCT_EM060K 0x030b
#define QUECTEL_PRODUCT_EM05G_CS 0x030c
+#define QUECTEL_PRODUCT_EM05GV2 0x030e
#define QUECTEL_PRODUCT_EM05CN_SG 0x0310
#define QUECTEL_PRODUCT_EM05G_SG 0x0311
#define QUECTEL_PRODUCT_EM05CN 0x0312
@@ -1188,6 +1189,8 @@ static const struct usb_device_id option
.driver_info = RSVD(6) | ZLP },
{ USB_DEVICE_INTERFACE_CLASS(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM05G, 0xff),
.driver_info = RSVD(6) | ZLP },
+ { USB_DEVICE_INTERFACE_CLASS(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM05GV2, 0xff),
+ .driver_info = RSVD(4) | ZLP },
{ USB_DEVICE_INTERFACE_CLASS(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM05G_CS, 0xff),
.driver_info = RSVD(6) | ZLP },
{ USB_DEVICE_INTERFACE_CLASS(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM05G_GR, 0xff),
next prev parent reply other threads:[~2023-09-04 18:32 UTC|newest]
Thread overview: 44+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-09-04 18:29 [PATCH 6.4 00/32] 6.4.15-rc1 review Greg Kroah-Hartman
2023-09-04 18:29 ` [PATCH 6.4 01/32] erofs: ensure that the post-EOF tails are all zeroed Greg Kroah-Hartman
2023-09-04 18:30 ` [PATCH 6.4 02/32] ksmbd: fix wrong DataOffset validation of create context Greg Kroah-Hartman
2023-09-04 18:30 ` [PATCH 6.4 03/32] ksmbd: fix slub overflow in ksmbd_decode_ntlmssp_auth_blob() Greg Kroah-Hartman
2023-09-04 18:30 ` [PATCH 6.4 04/32] ksmbd: replace one-element array with flex-array member in struct smb2_ea_info Greg Kroah-Hartman
2023-09-04 18:30 ` [PATCH 6.4 05/32] ksmbd: reduce descriptor size if remaining bytes is less than request size Greg Kroah-Hartman
2023-09-04 18:30 ` [PATCH 6.4 06/32] ARM: pxa: remove use of symbol_get() Greg Kroah-Hartman
2023-09-04 18:30 ` [PATCH 6.4 07/32] mmc: au1xmmc: force non-modular build and remove symbol_get usage Greg Kroah-Hartman
2023-09-04 18:30 ` [PATCH 6.4 08/32] net: enetc: use EXPORT_SYMBOL_GPL for enetc_phc_index Greg Kroah-Hartman
2023-09-04 18:30 ` [PATCH 6.4 09/32] rtc: ds1685: use EXPORT_SYMBOL_GPL for ds1685_rtc_poweroff Greg Kroah-Hartman
2023-09-04 18:30 ` [PATCH 6.4 10/32] modules: only allow symbol_get of EXPORT_SYMBOL_GPL modules Greg Kroah-Hartman
2023-09-04 18:30 ` Greg Kroah-Hartman [this message]
2023-09-04 18:30 ` [PATCH 6.4 12/32] USB: serial: option: add FOXCONN T99W368/T99W373 product Greg Kroah-Hartman
2023-09-04 18:30 ` [PATCH 6.4 13/32] ALSA: usb-audio: Fix init call orders for UAC1 Greg Kroah-Hartman
2023-09-04 18:30 ` [PATCH 6.4 14/32] usb: dwc3: meson-g12a: do post init to fix broken usb after resumption Greg Kroah-Hartman
2023-09-04 18:30 ` [PATCH 6.4 15/32] usb: chipidea: imx: improve logic if samsung,picophy-* parameter is 0 Greg Kroah-Hartman
2023-09-04 18:30 ` [PATCH 6.4 16/32] HID: wacom: remove the battery when the EKR is off Greg Kroah-Hartman
2023-09-04 18:30 ` [PATCH 6.4 17/32] staging: rtl8712: fix race condition Greg Kroah-Hartman
2023-09-04 18:30 ` [PATCH 6.4 18/32] wifi: mt76: mt7921: do not support one stream on secondary antenna only Greg Kroah-Hartman
2023-09-04 18:30 ` [PATCH 6.4 19/32] wifi: mt76: mt7921: fix skb leak by txs missing in AMSDU Greg Kroah-Hartman
2023-09-04 18:30 ` [PATCH 6.4 20/32] wifi: rtw88: usb: kill and free rx urbs on probe failure Greg Kroah-Hartman
2023-09-04 18:30 ` [PATCH 6.4 21/32] wifi: ath11k: Dont drop tx_status when peer cannot be found Greg Kroah-Hartman
2023-09-04 18:30 ` [PATCH 6.4 22/32] wifi: ath11k: Cleanup mac80211 references on failure during tx_complete Greg Kroah-Hartman
2023-09-04 18:30 ` [PATCH 6.4 23/32] serial: qcom-geni: fix opp vote on shutdown Greg Kroah-Hartman
2023-09-04 18:30 ` [PATCH 6.4 24/32] serial: sc16is7xx: fix broken port 0 uart init Greg Kroah-Hartman
2023-09-04 18:30 ` [PATCH 6.4 25/32] serial: sc16is7xx: fix bug when first setting GPIO direction Greg Kroah-Hartman
2023-09-04 18:30 ` [PATCH 6.4 26/32] firmware: stratix10-svc: Fix an NULL vs IS_ERR() bug in probe Greg Kroah-Hartman
2023-09-04 18:30 ` [PATCH 6.4 27/32] fsi: master-ast-cf: Add MODULE_FIRMWARE macro Greg Kroah-Hartman
2023-09-04 18:30 ` [PATCH 6.4 28/32] tcpm: Avoid soft reset when partner does not support get_status Greg Kroah-Hartman
2023-09-04 18:30 ` [PATCH 6.4 29/32] dt-bindings: sc16is7xx: Add property to change GPIO function Greg Kroah-Hartman
2023-09-04 18:30 ` [PATCH 6.4 30/32] nilfs2: fix WARNING in mark_buffer_dirty due to discarded buffer reuse Greg Kroah-Hartman
2023-09-04 18:30 ` [PATCH 6.4 31/32] usb: typec: tcpci: clear the fault status bit Greg Kroah-Hartman
2023-09-04 18:30 ` [PATCH 6.4 32/32] pinctrl: amd: Dont show `Invalid config param` errors Greg Kroah-Hartman
2023-09-05 0:09 ` [PATCH 6.4 00/32] 6.4.15-rc1 review Joel Fernandes
2023-09-05 4:28 ` Bagas Sanjaya
2023-09-05 8:28 ` Naresh Kamboju
2023-09-05 9:41 ` Sudip Mukherjee (Codethink)
2023-09-05 11:08 ` Jon Hunter
2023-09-05 17:09 ` Justin Forbes
2023-09-05 20:54 ` Shuah Khan
2023-09-05 21:01 ` Florian Fainelli
2023-09-05 23:06 ` Ron Economos
2023-09-06 5:13 ` SeongJae Park
2023-09-06 17:30 ` Guenter Roeck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230904182948.405081224@linuxfoundation.org \
--to=gregkh@linuxfoundation.org \
--cc=johan@kernel.org \
--cc=m.kohn@welotec.com \
--cc=patches@lists.linux.dev \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).