From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: stable@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
patches@lists.linux.dev, Slark Xiao <slark_xiao@163.com>,
Johan Hovold <johan@kernel.org>
Subject: [PATCH 6.5 13/34] USB: serial: option: add FOXCONN T99W368/T99W373 product
Date: Mon, 4 Sep 2023 19:30:00 +0100 [thread overview]
Message-ID: <20230904182949.188032354@linuxfoundation.org> (raw)
In-Reply-To: <20230904182948.594404081@linuxfoundation.org>
6.5-stable review patch. If anyone has any objections, please let me know.
------------------
From: Slark Xiao <slark_xiao@163.com>
commit 4d9488b294e1f8353bbcadc4c7172a7f7490199b upstream.
The difference of T99W368 and T99W373 is the chip solution.
T99W368 is designed based on Qualcomm SDX65 and T99W373 is SDX62.
Test evidence as below:
T: Bus=01 Lev=02 Prnt=05 Port=00 Cnt=01 Dev#= 7 Spd=480 MxCh= 0
D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0489 ProdID=e0f0 Rev=05.04
S: Manufacturer=FII
S: Product=OLYMPIC USB WWAN Adapter
S: SerialNumber=78ada8c4
C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA
I: If#=0x0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim
I: If#=0x1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
I: If#=0x3 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
I: If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
T: Bus=01 Lev=02 Prnt=05 Port=00 Cnt=01 Dev#= 8 Spd=480 MxCh= 0
D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0489 ProdID=e0ee Rev=05.04
S: Manufacturer=FII
S: Product=OLYMPIC USB WWAN Adapter
S: SerialNumber=78ada8d5
C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA
I: If#=0x0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim
I: If#=0x1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
I: If#=0x3 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
I: If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
Both of them share the same port configuration:
0&1: MBIM, 2: Modem, 3:GNSS, 4:NMEA, 5:Diag
GNSS port don't use serial driver.
Signed-off-by: Slark Xiao <slark_xiao@163.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/serial/option.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -2235,6 +2235,10 @@ static const struct usb_device_id option
.driver_info = RSVD(0) | RSVD(1) | RSVD(6) },
{ USB_DEVICE_INTERFACE_CLASS(0x0489, 0xe0db, 0xff), /* Foxconn T99W265 MBIM */
.driver_info = RSVD(3) },
+ { USB_DEVICE_INTERFACE_CLASS(0x0489, 0xe0ee, 0xff), /* Foxconn T99W368 MBIM */
+ .driver_info = RSVD(3) },
+ { USB_DEVICE_INTERFACE_CLASS(0x0489, 0xe0f0, 0xff), /* Foxconn T99W373 MBIM */
+ .driver_info = RSVD(3) },
{ USB_DEVICE(0x1508, 0x1001), /* Fibocom NL668 (IOT version) */
.driver_info = RSVD(4) | RSVD(5) | RSVD(6) },
{ USB_DEVICE(0x1782, 0x4d10) }, /* Fibocom L610 (AT mode) */
next prev parent reply other threads:[~2023-09-04 18:31 UTC|newest]
Thread overview: 54+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-09-04 18:29 [PATCH 6.5 00/34] 6.5.2-rc1 review Greg Kroah-Hartman
2023-09-04 18:29 ` [PATCH 6.5 01/34] drm/amdgpu: correct vmhub index in GMC v10/11 Greg Kroah-Hartman
2023-09-04 18:29 ` [PATCH 6.5 02/34] erofs: ensure that the post-EOF tails are all zeroed Greg Kroah-Hartman
2023-09-04 18:29 ` [PATCH 6.5 03/34] ksmbd: fix wrong DataOffset validation of create context Greg Kroah-Hartman
2023-09-04 18:29 ` [PATCH 6.5 04/34] ksmbd: fix slub overflow in ksmbd_decode_ntlmssp_auth_blob() Greg Kroah-Hartman
2023-09-04 18:29 ` [PATCH 6.5 05/34] ksmbd: replace one-element array with flex-array member in struct smb2_ea_info Greg Kroah-Hartman
2023-09-04 18:29 ` [PATCH 6.5 06/34] ksmbd: reduce descriptor size if remaining bytes is less than request size Greg Kroah-Hartman
2023-09-04 18:29 ` [PATCH 6.5 07/34] ARM: pxa: remove use of symbol_get() Greg Kroah-Hartman
2023-09-04 18:29 ` [PATCH 6.5 08/34] mmc: au1xmmc: force non-modular build and remove symbol_get usage Greg Kroah-Hartman
2023-09-04 18:29 ` [PATCH 6.5 09/34] net: enetc: use EXPORT_SYMBOL_GPL for enetc_phc_index Greg Kroah-Hartman
2023-09-04 18:29 ` [PATCH 6.5 10/34] rtc: ds1685: use EXPORT_SYMBOL_GPL for ds1685_rtc_poweroff Greg Kroah-Hartman
2023-09-04 18:29 ` [PATCH 6.5 11/34] modules: only allow symbol_get of EXPORT_SYMBOL_GPL modules Greg Kroah-Hartman
2023-09-07 6:41 ` Stefan Lippers-Hollmann
2023-09-07 9:30 ` Greg Kroah-Hartman
2023-09-07 20:17 ` Stefan Lippers-Hollmann
2023-09-08 6:46 ` Greg Kroah-Hartman
2023-09-08 7:07 ` Greg Kroah-Hartman
2023-09-08 8:31 ` Christoph Hellwig
2023-09-08 8:35 ` Christoph Hellwig
2023-09-08 8:47 ` Greg Kroah-Hartman
2023-09-04 18:29 ` [PATCH 6.5 12/34] USB: serial: option: add Quectel EM05G variant (0x030e) Greg Kroah-Hartman
2023-09-04 18:30 ` Greg Kroah-Hartman [this message]
2023-09-04 18:30 ` [PATCH 6.5 14/34] ALSA: usb-audio: Fix init call orders for UAC1 Greg Kroah-Hartman
2023-09-04 18:30 ` [PATCH 6.5 15/34] usb: dwc3: meson-g12a: do post init to fix broken usb after resumption Greg Kroah-Hartman
2023-09-04 18:30 ` [PATCH 6.5 16/34] usb: chipidea: imx: improve logic if samsung,picophy-* parameter is 0 Greg Kroah-Hartman
2023-09-04 18:30 ` [PATCH 6.5 17/34] HID: wacom: remove the battery when the EKR is off Greg Kroah-Hartman
2023-09-04 18:30 ` [PATCH 6.5 18/34] staging: rtl8712: fix race condition Greg Kroah-Hartman
2023-09-04 18:30 ` [PATCH 6.5 19/34] wifi: mt76: mt7921: do not support one stream on secondary antenna only Greg Kroah-Hartman
2023-09-04 18:30 ` [PATCH 6.5 20/34] wifi: mt76: mt7921: fix skb leak by txs missing in AMSDU Greg Kroah-Hartman
2023-09-04 18:30 ` [PATCH 6.5 21/34] wifi: rtw88: usb: kill and free rx urbs on probe failure Greg Kroah-Hartman
2023-09-04 18:30 ` [PATCH 6.5 22/34] wifi: ath11k: Dont drop tx_status when peer cannot be found Greg Kroah-Hartman
2023-09-04 18:30 ` [PATCH 6.5 23/34] wifi: ath11k: Cleanup mac80211 references on failure during tx_complete Greg Kroah-Hartman
2023-09-04 18:30 ` [PATCH 6.5 24/34] serial: qcom-geni: fix opp vote on shutdown Greg Kroah-Hartman
2023-09-04 18:30 ` [PATCH 6.5 25/34] serial: sc16is7xx: fix broken port 0 uart init Greg Kroah-Hartman
2023-09-04 18:30 ` [PATCH 6.5 26/34] serial: sc16is7xx: fix bug when first setting GPIO direction Greg Kroah-Hartman
2023-09-04 18:30 ` [PATCH 6.5 27/34] firmware: stratix10-svc: Fix an NULL vs IS_ERR() bug in probe Greg Kroah-Hartman
2023-09-04 18:30 ` [PATCH 6.5 28/34] fsi: master-ast-cf: Add MODULE_FIRMWARE macro Greg Kroah-Hartman
2023-09-04 18:30 ` [PATCH 6.5 29/34] tcpm: Avoid soft reset when partner does not support get_status Greg Kroah-Hartman
2023-09-04 18:30 ` [PATCH 6.5 30/34] dt-bindings: sc16is7xx: Add property to change GPIO function Greg Kroah-Hartman
2023-09-04 18:30 ` [PATCH 6.5 31/34] tracing: Zero the pipe cpumask on alloc to avoid spurious -EBUSY Greg Kroah-Hartman
2023-09-04 18:30 ` [PATCH 6.5 32/34] nilfs2: fix WARNING in mark_buffer_dirty due to discarded buffer reuse Greg Kroah-Hartman
2023-09-04 18:30 ` [PATCH 6.5 33/34] usb: typec: tcpci: clear the fault status bit Greg Kroah-Hartman
2023-09-04 18:30 ` [PATCH 6.5 34/34] pinctrl: amd: Dont show `Invalid config param` errors Greg Kroah-Hartman
2023-09-05 0:09 ` [PATCH 6.5 00/34] 6.5.2-rc1 review Joel Fernandes
2023-09-05 4:43 ` Bagas Sanjaya
2023-09-05 8:15 ` Naresh Kamboju
2023-09-05 9:44 ` Sudip Mukherjee (Codethink)
2023-09-05 11:08 ` Jon Hunter
2023-09-05 17:11 ` Justin Forbes
2023-09-05 20:52 ` Shuah Khan
2023-09-05 22:52 ` Ron Economos
2023-09-06 5:31 ` SeongJae Park
2023-09-06 10:52 ` Rudi Heitbaum
2023-09-06 17:25 ` Guenter Roeck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230904182949.188032354@linuxfoundation.org \
--to=gregkh@linuxfoundation.org \
--cc=johan@kernel.org \
--cc=patches@lists.linux.dev \
--cc=slark_xiao@163.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).