Archive-only list for patches
 help / color / mirror / Atom feed
From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: stable@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	patches@lists.linux.dev,
	Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Subject: [PATCH 5.4 68/74] Revert "ARM: dts: Move am33xx and am43xx mmc nodes to sdhci-omap driver"
Date: Mon,  6 Nov 2023 14:04:28 +0100	[thread overview]
Message-ID: <20231106130304.033114155@linuxfoundation.org> (raw)
In-Reply-To: <20231106130301.687882731@linuxfoundation.org>

5.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>

This reverts commit d0c69c722ff16ce2481a5e0932c6d5b172109f21 which is
commit 0b4edf111870b83ea77b1d7e16b8ceac29f9f388 upstream.

The reverted commit completely breaks MMC on the AM33xx/AM437x for
multiple reasons:

- The changed compatible strings ti,am335-sdhci and ti,am437-sdhci
  aren't supported on Linux 5.4 at all, so no driver is found
- Even when additionally backporting the support for these compatible
  strings in the sdhci-omap driver, I could not the the MMC interfaces
  to work on our TQMa335x SoM - the interface would time out during card
  initialization for both an eMMC and an SD card.

I did not investigate the cause of the timeouts further, and instead
just reverted the commit - switching to a different MMC driver in a stable
kernel seems like a rather risky change unless it's thoroughly tested,
which has obviously not happened in this case.

The reverted commit is also given as a Stable-dep-of commit 2eb502f496f7
("ARM: dts: am33xx: Fix MMCHS0 dma properties"), however the conflict
resulting when only the one commit is reverted is trivial to resolve,
which leads to working MMC controllers again.

Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/arm/boot/dts/am335x-baltos.dtsi              |    2 +-
 arch/arm/boot/dts/am335x-boneblack-common.dtsi    |    1 -
 arch/arm/boot/dts/am335x-boneblack-wireless.dts   |    1 +
 arch/arm/boot/dts/am335x-boneblue.dts             |    1 +
 arch/arm/boot/dts/am335x-bonegreen-wireless.dts   |    1 +
 arch/arm/boot/dts/am335x-evm.dts                  |    3 ++-
 arch/arm/boot/dts/am335x-evmsk.dts                |    2 +-
 arch/arm/boot/dts/am335x-lxm.dts                  |    2 +-
 arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi |    2 +-
 arch/arm/boot/dts/am335x-moxa-uc-8100-me-t.dts    |    2 +-
 arch/arm/boot/dts/am335x-pepper.dts               |    4 ++--
 arch/arm/boot/dts/am335x-phycore-som.dtsi         |    2 +-
 arch/arm/boot/dts/am33xx-l4.dtsi                  |    6 ++++--
 arch/arm/boot/dts/am33xx.dtsi                     |    3 +--
 arch/arm/boot/dts/am4372.dtsi                     |    3 +--
 arch/arm/boot/dts/am437x-cm-t43.dts               |    2 +-
 arch/arm/boot/dts/am437x-gp-evm.dts               |    4 ++--
 arch/arm/boot/dts/am437x-l4.dtsi                  |    5 +++--
 arch/arm/boot/dts/am437x-sk-evm.dts               |    2 +-
 19 files changed, 26 insertions(+), 22 deletions(-)

--- a/arch/arm/boot/dts/am335x-baltos.dtsi
+++ b/arch/arm/boot/dts/am335x-baltos.dtsi
@@ -381,7 +381,7 @@
 &mmc2 {
 	status = "okay";
 	vmmc-supply = <&wl12xx_vmmc>;
-	non-removable;
+	ti,non-removable;
 	bus-width = <4>;
 	cap-power-off-card;
 	pinctrl-names = "default";
--- a/arch/arm/boot/dts/am335x-boneblack-common.dtsi
+++ b/arch/arm/boot/dts/am335x-boneblack-common.dtsi
@@ -22,7 +22,6 @@
 	pinctrl-0 = <&emmc_pins>;
 	bus-width = <8>;
 	status = "okay";
-	non-removable;
 };
 
 &am33xx_pinmux {
--- a/arch/arm/boot/dts/am335x-boneblack-wireless.dts
+++ b/arch/arm/boot/dts/am335x-boneblack-wireless.dts
@@ -75,6 +75,7 @@
 	bus-width = <4>;
 	non-removable;
 	cap-power-off-card;
+	ti,needs-special-hs-handling;
 	keep-power-in-suspend;
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc3_pins &wl18xx_pins>;
--- a/arch/arm/boot/dts/am335x-boneblue.dts
+++ b/arch/arm/boot/dts/am335x-boneblue.dts
@@ -389,6 +389,7 @@
 	bus-width = <4>;
 	non-removable;
 	cap-power-off-card;
+	ti,needs-special-hs-handling;
 	keep-power-in-suspend;
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc3_pins &wl18xx_pins>;
--- a/arch/arm/boot/dts/am335x-bonegreen-wireless.dts
+++ b/arch/arm/boot/dts/am335x-bonegreen-wireless.dts
@@ -75,6 +75,7 @@
 	bus-width = <4>;
 	non-removable;
 	cap-power-off-card;
+	ti,needs-special-hs-handling;
 	keep-power-in-suspend;
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc3_pins &wl18xx_pins>;
--- a/arch/arm/boot/dts/am335x-evm.dts
+++ b/arch/arm/boot/dts/am335x-evm.dts
@@ -782,7 +782,8 @@
 	bus-width = <4>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc3_pins &wlan_pins>;
-	non-removable;
+	ti,non-removable;
+	ti,needs-special-hs-handling;
 	cap-power-off-card;
 	keep-power-in-suspend;
 
--- a/arch/arm/boot/dts/am335x-evmsk.dts
+++ b/arch/arm/boot/dts/am335x-evmsk.dts
@@ -700,7 +700,7 @@
 &mmc2 {
 	status = "okay";
 	vmmc-supply = <&wl12xx_vmmc>;
-	non-removable;
+	ti,non-removable;
 	bus-width = <4>;
 	cap-power-off-card;
 	keep-power-in-suspend;
--- a/arch/arm/boot/dts/am335x-lxm.dts
+++ b/arch/arm/boot/dts/am335x-lxm.dts
@@ -361,7 +361,7 @@
 	pinctrl-0 = <&emmc_pins>;
 	vmmc-supply = <&vmmcsd_fixed>;
 	bus-width = <8>;
-	non-removable;
+	ti,non-removable;
 	status = "okay";
 };
 
--- a/arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi
+++ b/arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi
@@ -176,7 +176,7 @@
 	vmmc-supply = <&vmmcsd_fixed>;
 	bus-width = <8>;
 	pinctrl-0 = <&mmc1_pins_default>;
-	non-removable;
+	ti,non-removable;
 	status = "okay";
 };
 
--- a/arch/arm/boot/dts/am335x-moxa-uc-8100-me-t.dts
+++ b/arch/arm/boot/dts/am335x-moxa-uc-8100-me-t.dts
@@ -473,7 +473,7 @@
 	vmmc-supply = <&vmmcsd_fixed>;
 	bus-width = <8>;
 	pinctrl-0 = <&mmc2_pins_default>;
-	non-removable;
+	ti,non-removable;
 	status = "okay";
 };
 
--- a/arch/arm/boot/dts/am335x-pepper.dts
+++ b/arch/arm/boot/dts/am335x-pepper.dts
@@ -341,7 +341,7 @@
 	pinctrl-0 = <&emmc_pins>;
 	vmmc-supply = <&ldo3_reg>;
 	bus-width = <8>;
-	non-removable;
+	ti,non-removable;
 };
 
 &mmc3 {
@@ -351,7 +351,7 @@
 	pinctrl-0 = <&wireless_pins>;
 	vmmmc-supply = <&v3v3c_reg>;
 	bus-width = <4>;
-	non-removable;
+	ti,non-removable;
 	dmas = <&edma_xbar 12 0 1
 		&edma_xbar 13 0 2>;
 	dma-names = "tx", "rx";
--- a/arch/arm/boot/dts/am335x-phycore-som.dtsi
+++ b/arch/arm/boot/dts/am335x-phycore-som.dtsi
@@ -69,7 +69,7 @@
 	pinctrl-0 = <&emmc_pins>;
 	vmmc-supply = <&vmmc_reg>;
 	bus-width = <8>;
-	non-removable;
+	ti,non-removable;
 	status = "disabled";
 };
 
--- a/arch/arm/boot/dts/am33xx-l4.dtsi
+++ b/arch/arm/boot/dts/am33xx-l4.dtsi
@@ -1333,8 +1333,10 @@
 			ranges = <0x0 0x60000 0x1000>;
 
 			mmc1: mmc@0 {
-				compatible = "ti,am335-sdhci";
+				compatible = "ti,omap4-hsmmc";
+				ti,dual-volt;
 				ti,needs-special-reset;
+				ti,needs-special-hs-handling;
 				dmas = <&edma 24 0>, <&edma 25 0>;
 				dma-names = "tx", "rx";
 				interrupts = <64>;
@@ -1824,7 +1826,7 @@
 			ranges = <0x0 0xd8000 0x1000>;
 
 			mmc2: mmc@0 {
-				compatible = "ti,am335-sdhci";
+				compatible = "ti,omap4-hsmmc";
 				ti,needs-special-reset;
 				dmas = <&edma 2 0
 					&edma 3 0>;
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -259,11 +259,10 @@
 			ranges = <0x0 0x47810000 0x1000>;
 
 			mmc3: mmc@0 {
-				compatible = "ti,am335-sdhci";
+				compatible = "ti,omap4-hsmmc";
 				ti,needs-special-reset;
 				interrupts = <29>;
 				reg = <0x0 0x1000>;
-				status = "disabled";
 			};
 		};
 
--- a/arch/arm/boot/dts/am4372.dtsi
+++ b/arch/arm/boot/dts/am4372.dtsi
@@ -250,11 +250,10 @@
 			ranges = <0x0 0x47810000 0x1000>;
 
 			mmc3: mmc@0 {
-				compatible = "ti,am437-sdhci";
+				compatible = "ti,omap4-hsmmc";
 				ti,needs-special-reset;
 				interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
 				reg = <0x0 0x1000>;
-				status = "disabled";
 			};
 		};
 
--- a/arch/arm/boot/dts/am437x-cm-t43.dts
+++ b/arch/arm/boot/dts/am437x-cm-t43.dts
@@ -291,7 +291,7 @@
 	pinctrl-0 = <&emmc_pins>;
 	vmmc-supply = <&vmmc_3v3>;
 	bus-width = <8>;
-	non-removable;
+	ti,non-removable;
 };
 
 &spi0 {
--- a/arch/arm/boot/dts/am437x-gp-evm.dts
+++ b/arch/arm/boot/dts/am437x-gp-evm.dts
@@ -872,7 +872,7 @@
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&emmc_pins_default>;
 	pinctrl-1 = <&emmc_pins_sleep>;
-	non-removable;
+	ti,non-removable;
 };
 
 &mmc3 {
@@ -889,7 +889,7 @@
 	pinctrl-1 = <&mmc3_pins_sleep>;
 	cap-power-off-card;
 	keep-power-in-suspend;
-	non-removable;
+	ti,non-removable;
 
 	#address-cells = <1>;
 	#size-cells = <0>;
--- a/arch/arm/boot/dts/am437x-l4.dtsi
+++ b/arch/arm/boot/dts/am437x-l4.dtsi
@@ -1104,8 +1104,9 @@
 			ranges = <0x0 0x60000 0x1000>;
 
 			mmc1: mmc@0 {
-				compatible = "ti,am437-sdhci";
+				compatible = "ti,omap4-hsmmc";
 				reg = <0x0 0x1000>;
+				ti,dual-volt;
 				ti,needs-special-reset;
 				dmas = <&edma 24 0>,
 					<&edma 25 0>;
@@ -1640,7 +1641,7 @@
 			ranges = <0x0 0xd8000 0x1000>;
 
 			mmc2: mmc@0 {
-				compatible = "ti,am437-sdhci";
+				compatible = "ti,omap4-hsmmc";
 				reg = <0x0 0x1000>;
 				ti,needs-special-reset;
 				dmas = <&edma 2 0>,
--- a/arch/arm/boot/dts/am437x-sk-evm.dts
+++ b/arch/arm/boot/dts/am437x-sk-evm.dts
@@ -694,7 +694,7 @@
 	pinctrl-1 = <&mmc3_pins_sleep>;
 	cap-power-off-card;
 	keep-power-in-suspend;
-	non-removable;
+	ti,non-removable;
 
 	#address-cells = <1>;
 	#size-cells = <0>;



  parent reply	other threads:[~2023-11-06 13:22 UTC|newest]

Thread overview: 81+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-11-06 13:03 [PATCH 5.4 00/74] 5.4.260-rc1 review Greg Kroah-Hartman
2023-11-06 13:03 ` [PATCH 5.4 01/74] mtd: rawnand: marvell: Ensure program page operations are successful Greg Kroah-Hartman
2023-11-06 13:03 ` [PATCH 5.4 02/74] selftests/ftrace: Add new test case which checks non unique symbol Greg Kroah-Hartman
2023-11-06 13:03 ` [PATCH 5.4 03/74] mcb: Return actual parsed size when reading chameleon table Greg Kroah-Hartman
2023-11-06 13:03 ` [PATCH 5.4 04/74] mcb-lpc: Reallocate memory region to avoid memory overlapping Greg Kroah-Hartman
2023-11-06 13:03 ` [PATCH 5.4 05/74] virtio_balloon: Fix endless deflation and inflation on arm64 Greg Kroah-Hartman
2023-11-06 13:03 ` [PATCH 5.4 06/74] virtio-mmio: fix memory leak of vm_dev Greg Kroah-Hartman
2023-11-06 13:03 ` [PATCH 5.4 07/74] r8169: fix the KCSAN reported data-race in rtl_tx while reading TxDescArray[entry].opts1 Greg Kroah-Hartman
2023-11-06 13:03 ` [PATCH 5.4 08/74] r8169: fix the KCSAN reported data race in rtl_rx while reading desc->opts1 Greg Kroah-Hartman
2023-11-06 13:03 ` [PATCH 5.4 09/74] treewide: Spelling fix in comment Greg Kroah-Hartman
2023-11-06 13:03 ` [PATCH 5.4 10/74] igb: Fix potential memory leak in igb_add_ethtool_nfc_entry Greg Kroah-Hartman
2023-11-06 13:03 ` [PATCH 5.4 11/74] neighbour: fix various data-races Greg Kroah-Hartman
2023-11-06 13:03 ` [PATCH 5.4 12/74] igc: Fix ambiguity in the ethtool advertising Greg Kroah-Hartman
2023-11-06 13:03 ` [PATCH 5.4 13/74] net: ieee802154: adf7242: Fix some potential buffer overflow in adf7242_stats_show() Greg Kroah-Hartman
2023-11-06 13:03 ` [PATCH 5.4 14/74] r8152: Increase USB control msg timeout to 5000ms as per spec Greg Kroah-Hartman
2023-11-06 13:03 ` [PATCH 5.4 15/74] r8152: Run the unload routine if we have errors during probe Greg Kroah-Hartman
2023-11-06 13:03 ` [PATCH 5.4 16/74] r8152: Cancel hw_phy_work if we have an error in probe Greg Kroah-Hartman
2023-11-06 13:03 ` [PATCH 5.4 17/74] tcp: fix wrong RTO timeout when received SACK reneging Greg Kroah-Hartman
2023-11-06 13:03 ` [PATCH 5.4 18/74] gtp: uapi: fix GTPA_MAX Greg Kroah-Hartman
2023-11-06 13:03 ` [PATCH 5.4 19/74] gtp: fix fragmentation needed check with gso Greg Kroah-Hartman
2023-11-06 13:03 ` [PATCH 5.4 20/74] iio: exynos-adc: request second interupt only when touchscreen mode is used Greg Kroah-Hartman
2023-11-06 13:03 ` [PATCH 5.4 21/74] i2c: muxes: i2c-mux-pinctrl: Use of_get_i2c_adapter_by_node() Greg Kroah-Hartman
2023-11-06 13:03 ` [PATCH 5.4 22/74] i2c: muxes: i2c-mux-gpmux: " Greg Kroah-Hartman
2023-11-06 13:03 ` [PATCH 5.4 23/74] i2c: muxes: i2c-demux-pinctrl: " Greg Kroah-Hartman
2023-11-06 13:03 ` [PATCH 5.4 24/74] i2c: stm32f7: Fix PEC handling in case of SMBUS transfers Greg Kroah-Hartman
2023-11-06 13:03 ` [PATCH 5.4 25/74] i2c: aspeed: Fix i2c bus hang in slave read Greg Kroah-Hartman
2023-11-06 13:03 ` [PATCH 5.4 26/74] nvmem: imx: correct nregs for i.MX6ULL Greg Kroah-Hartman
2023-11-06 13:03 ` [PATCH 5.4 27/74] nvmem: imx: correct nregs for i.MX6SLL Greg Kroah-Hartman
2023-11-06 13:03 ` [PATCH 5.4 28/74] nvmem: imx: correct nregs for i.MX6UL Greg Kroah-Hartman
2023-11-06 13:03 ` [PATCH 5.4 29/74] perf/core: Fix potential NULL deref Greg Kroah-Hartman
2023-11-06 13:03 ` [PATCH 5.4 30/74] clk: Sanitize possible_parent_show to Handle Return Value of of_clk_get_parent_name Greg Kroah-Hartman
2023-11-06 13:03 ` [PATCH 5.4 31/74] i40e: Fix wrong check for I40E_TXR_FLAGS_WB_ON_ITR Greg Kroah-Hartman
2023-11-06 13:03 ` [PATCH 5.4 32/74] x86/i8259: Skip probing when ACPI/MADT advertises PCAT compatibility Greg Kroah-Hartman
2023-11-06 13:03 ` [PATCH 5.4 33/74] drm/dp_mst: Fix NULL deref in get_mst_branch_device_by_guid_helper() Greg Kroah-Hartman
2023-11-06 13:03 ` [PATCH 5.4 34/74] arm64: fix a concurrency issue in emulation_proc_handler() Greg Kroah-Hartman
2023-11-06 13:03 ` [PATCH 5.4 35/74] kobject: Fix slab-out-of-bounds in fill_kobj_path() Greg Kroah-Hartman
2023-11-06 13:03 ` [PATCH 5.4 36/74] smbdirect: missing rc checks while waiting for rdma events Greg Kroah-Hartman
2023-11-06 13:03 ` [PATCH 5.4 37/74] f2fs: fix to do sanity check on inode type during garbage collection Greg Kroah-Hartman
2023-11-06 13:03 ` [PATCH 5.4 38/74] nfsd: lock_rename() needs both directories to live on the same fs Greg Kroah-Hartman
2023-11-06 13:03 ` [PATCH 5.4 39/74] x86/mm: Simplify RESERVE_BRK() Greg Kroah-Hartman
2023-11-06 13:04 ` [PATCH 5.4 40/74] x86/mm: Fix RESERVE_BRK() for older binutils Greg Kroah-Hartman
2023-11-06 13:04 ` [PATCH 5.4 41/74] ext4: add two helper functions extent_logical_end() and pa_logical_end() Greg Kroah-Hartman
2023-11-06 13:04 ` [PATCH 5.4 42/74] ext4: avoid overlapping preallocations due to overflow Greg Kroah-Hartman
2023-11-06 13:04 ` [PATCH 5.4 43/74] ext4: fix BUG in ext4_mb_new_inode_pa() " Greg Kroah-Hartman
2023-11-06 13:04 ` [PATCH 5.4 44/74] driver: platform: Add helper for safer setting of driver_override Greg Kroah-Hartman
2023-11-06 13:04 ` [PATCH 5.4 45/74] rpmsg: Constify local variable in field store macro Greg Kroah-Hartman
2023-11-06 13:04 ` [PATCH 5.4 46/74] rpmsg: Fix kfree() of static memory on setting driver_override Greg Kroah-Hartman
2023-11-06 13:04 ` [PATCH 5.4 47/74] rpmsg: Fix calling device_lock() on non-initialized device Greg Kroah-Hartman
2023-11-06 13:04 ` [PATCH 5.4 48/74] rpmsg: glink: Release driver_override Greg Kroah-Hartman
2023-11-06 13:04 ` [PATCH 5.4 49/74] rpmsg: Fix possible refcount leak in rpmsg_register_device_override() Greg Kroah-Hartman
2023-11-06 13:04 ` [PATCH 5.4 50/74] x86: Fix .brk attribute in linker script Greg Kroah-Hartman
2023-11-06 13:04 ` [PATCH 5.4 51/74] Input: i8042 - add Fujitsu Lifebook E5411 to i8042 quirk table Greg Kroah-Hartman
2023-11-06 13:04 ` [PATCH 5.4 52/74] irqchip/stm32-exti: add missing DT IRQ flag translation Greg Kroah-Hartman
2023-11-06 13:04 ` [PATCH 5.4 53/74] dmaengine: ste_dma40: Fix PM disable depth imbalance in d40_probe Greg Kroah-Hartman
2023-11-06 13:04 ` [PATCH 5.4 54/74] Input: synaptics-rmi4 - handle reset delay when using SMBus trsnsport Greg Kroah-Hartman
2023-11-06 13:04 ` [PATCH 5.4 55/74] fbdev: atyfb: only use ioremap_uc() on i386 and ia64 Greg Kroah-Hartman
2023-11-06 13:04 ` [PATCH 5.4 56/74] spi: npcm-fiu: Fix UMA reads when dummy.nbytes == 0 Greg Kroah-Hartman
2023-11-06 13:04 ` [PATCH 5.4 57/74] netfilter: nfnetlink_log: silence bogus compiler warning Greg Kroah-Hartman
2023-11-06 13:04 ` [PATCH 5.4 58/74] ASoC: rt5650: fix the wrong result of key button Greg Kroah-Hartman
2023-11-06 13:04 ` [PATCH 5.4 59/74] fbdev: uvesafb: Call cn_del_callback() at the end of uvesafb_exit() Greg Kroah-Hartman
2023-11-06 13:04 ` [PATCH 5.4 60/74] scsi: mpt3sas: Fix in error path Greg Kroah-Hartman
2023-11-06 13:04 ` [PATCH 5.4 61/74] platform/x86: asus-wmi: Change ASUS_WMI_BRN_DOWN code from 0x20 to 0x2e Greg Kroah-Hartman
2023-11-06 13:04 ` [PATCH 5.4 62/74] platform/mellanox: mlxbf-tmfifo: Fix a warning message Greg Kroah-Hartman
2023-11-06 13:04 ` [PATCH 5.4 63/74] net: chelsio: cxgb4: add an error code check in t4_load_phy_fw Greg Kroah-Hartman
2023-11-06 13:04 ` [PATCH 5.4 64/74] ata: ahci: fix enum constants for gcc-13 Greg Kroah-Hartman
2023-11-06 13:04 ` [PATCH 5.4 65/74] remove the sx8 block driver Greg Kroah-Hartman
2023-11-06 13:04 ` [PATCH 5.4 66/74] nvmet-tcp: move send/recv error handling in the send/recv methods instead of call-sites Greg Kroah-Hartman
2023-11-06 13:04 ` [PATCH 5.4 67/74] nvmet-tcp: Fix a possible UAF in queue intialization setup Greg Kroah-Hartman
2023-11-06 13:04 ` Greg Kroah-Hartman [this message]
2023-11-06 13:04 ` [PATCH 5.4 69/74] PCI: Prevent xHCI driver from claiming AMD VanGogh USB3 DRD device Greg Kroah-Hartman
2023-11-06 13:04 ` [PATCH 5.4 70/74] usb: storage: set 1.50 as the lower bcdDevice for older "Super Top" compatibility Greg Kroah-Hartman
2023-11-06 13:04 ` [PATCH 5.4 71/74] tty: 8250: Remove UC-257 and UC-431 Greg Kroah-Hartman
2023-11-06 13:04 ` [PATCH 5.4 72/74] tty: 8250: Add support for additional Brainboxes UC cards Greg Kroah-Hartman
2023-11-06 13:04 ` [PATCH 5.4 73/74] tty: 8250: Add support for Brainboxes UP cards Greg Kroah-Hartman
2023-11-06 13:04 ` [PATCH 5.4 74/74] tty: 8250: Add support for Intashield IS-100 Greg Kroah-Hartman
2023-11-06 17:32 ` [PATCH 5.4 00/74] 5.4.260-rc1 review Florian Fainelli
2023-11-07 11:42 ` Jon Hunter
2023-11-07 15:31 ` Harshit Mogalapalli
2023-11-07 15:51 ` Shuah Khan
2023-11-07 18:26 ` Naresh Kamboju
2023-11-07 18:53 ` Guenter Roeck

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20231106130304.033114155@linuxfoundation.org \
    --to=gregkh@linuxfoundation.org \
    --cc=matthias.schiffer@ew.tq-group.com \
    --cc=patches@lists.linux.dev \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox