From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: stable@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
patches@lists.linux.dev, Alexandra Winter <wintera@linux.ibm.com>,
Paolo Abeni <pabeni@redhat.com>, Sasha Levin <sashal@kernel.org>
Subject: [PATCH 4.19 25/52] s390/qeth: Fix potential loss of L3-IP@ in case of network issues
Date: Tue, 27 Feb 2024 14:26:12 +0100 [thread overview]
Message-ID: <20240227131549.358561388@linuxfoundation.org> (raw)
In-Reply-To: <20240227131548.514622258@linuxfoundation.org>
4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Alexandra Winter <wintera@linux.ibm.com>
[ Upstream commit 2fe8a236436fe40d8d26a1af8d150fc80f04ee1a ]
Symptom:
In case of a bad cable connection (e.g. dirty optics) a fast sequence of
network DOWN-UP-DOWN-UP could happen. UP triggers recovery of the qeth
interface. In case of a second DOWN while recovery is still ongoing, it
can happen that the IP@ of a Layer3 qeth interface is lost and will not
be recovered by the second UP.
Problem:
When registration of IP addresses with Layer 3 qeth devices fails, (e.g.
because of bad address format) the respective IP address is deleted from
its hash-table in the driver. If registration fails because of a ENETDOWN
condition, the address should stay in the hashtable, so a subsequent
recovery can restore it.
3caa4af834df ("qeth: keep ip-address after LAN_OFFLINE failure")
fixes this for registration failures during normal operation, but not
during recovery.
Solution:
Keep L3-IP address in case of ENETDOWN in qeth_l3_recover_ip(). For
consistency with qeth_l3_add_ip() we also keep it in case of EADDRINUSE,
i.e. for some reason the card already/still has this address registered.
Fixes: 4a71df50047f ("qeth: new qeth device driver")
Cc: stable@vger.kernel.org
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Link: https://lore.kernel.org/r/20240206085849.2902775-1-wintera@linux.ibm.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/s390/net/qeth_l3_main.c | 9 ++++++---
1 file changed, 6 insertions(+), 3 deletions(-)
diff --git a/drivers/s390/net/qeth_l3_main.c b/drivers/s390/net/qeth_l3_main.c
index 52e0ae4dc7241..e9102359e3134 100644
--- a/drivers/s390/net/qeth_l3_main.c
+++ b/drivers/s390/net/qeth_l3_main.c
@@ -285,9 +285,10 @@ static void qeth_l3_clear_ip_htable(struct qeth_card *card, int recover)
if (!recover) {
hash_del(&addr->hnode);
kfree(addr);
- continue;
+ } else {
+ /* prepare for recovery */
+ addr->disp_flag = QETH_DISP_ADDR_ADD;
}
- addr->disp_flag = QETH_DISP_ADDR_ADD;
}
spin_unlock_bh(&card->ip_lock);
@@ -325,11 +326,13 @@ static void qeth_l3_recover_ip(struct qeth_card *card)
} else
rc = qeth_l3_register_addr_entry(card, addr);
- if (!rc) {
+ if (!rc || rc == -EADDRINUSE || rc == -ENETDOWN) {
+ /* keep it in the records */
addr->disp_flag = QETH_DISP_ADDR_DO_NOTHING;
if (addr->ref_counter < 1)
qeth_l3_delete_ip(card, addr);
} else {
+ /* bad address */
hash_del(&addr->hnode);
kfree(addr);
}
--
2.43.0
next prev parent reply other threads:[~2024-02-27 13:44 UTC|newest]
Thread overview: 58+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-02-27 13:25 [PATCH 4.19 00/52] 4.19.308-rc1 review Greg Kroah-Hartman
2024-02-27 13:25 ` [PATCH 4.19 01/52] net/sched: Retire CBQ qdisc Greg Kroah-Hartman
2024-02-27 13:25 ` [PATCH 4.19 02/52] net/sched: Retire ATM qdisc Greg Kroah-Hartman
2024-02-27 13:25 ` [PATCH 4.19 03/52] net/sched: Retire dsmark qdisc Greg Kroah-Hartman
2024-02-27 13:25 ` [PATCH 4.19 04/52] stmmac: no need to check return value of debugfs_create functions Greg Kroah-Hartman
2024-02-27 13:25 ` [PATCH 4.19 05/52] net: stmmac: fix notifier registration Greg Kroah-Hartman
2024-02-27 13:25 ` [PATCH 4.19 06/52] memcg: add refcnt for pcpu stock to avoid UAF problem in drain_all_stock() Greg Kroah-Hartman
2024-02-27 13:25 ` [PATCH 4.19 07/52] nilfs2: replace WARN_ONs for invalid DAT metadata block requests Greg Kroah-Hartman
2024-02-27 13:25 ` [PATCH 4.19 08/52] userfaultfd: fix mmap_changing checking in mfill_atomic_hugetlb Greg Kroah-Hartman
2024-02-27 13:25 ` [PATCH 4.19 09/52] sched/rt: Fix sysctl_sched_rr_timeslice intial value Greg Kroah-Hartman
2024-02-27 13:25 ` [PATCH 4.19 10/52] sched/rt: sysctl_sched_rr_timeslice show default timeslice after reset Greg Kroah-Hartman
2024-02-27 13:25 ` [PATCH 4.19 11/52] sched/rt: Disallow writing invalid values to sched_rt_period_us Greg Kroah-Hartman
2024-02-27 13:25 ` [PATCH 4.19 12/52] scsi: target: core: Add TMF to tmr_list handling Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 4.19 13/52] dmaengine: shdma: increase size of dev_id Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 4.19 14/52] wifi: cfg80211: fix missing interfaces when dumping Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 4.19 15/52] wifi: mac80211: fix race condition on enabling fast-xmit Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 4.19 16/52] fbdev: savage: Error out if pixclock equals zero Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 4.19 17/52] fbdev: sis: " Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 4.19 18/52] ahci: asm1166: correct count of reported ports Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 4.19 19/52] ext4: avoid allocating blocks from corrupted group in ext4_mb_try_best_found() Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 4.19 20/52] ext4: avoid allocating blocks from corrupted group in ext4_mb_find_by_goal() Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 4.19 21/52] regulator: pwm-regulator: Add validity checks in continuous .get_voltage Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 4.19 22/52] hwmon: (coretemp) Enlarge per package core count limit Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 4.19 23/52] firewire: core: send bus reset promptly on gap count error Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 4.19 24/52] virtio-blk: Ensure no requests in virtqueues before deleting vqs Greg Kroah-Hartman
2024-02-27 13:26 ` Greg Kroah-Hartman [this message]
2024-02-27 13:26 ` [PATCH 4.19 26/52] pmdomain: renesas: r8a77980-sysc: CR7 must be always on Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 4.19 27/52] IB/hfi1: Fix sdma.h tx->num_descs off-by-one error Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 4.19 28/52] mm: memcontrol: switch to rcu protection in drain_all_stock() Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 4.19 29/52] dm-crypt: dont modify the data when using authenticated encryption Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 4.19 30/52] gtp: fix use-after-free and null-ptr-deref in gtp_genl_dump_pdp() Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 4.19 31/52] l2tp: pass correct message length to ip6_append_data Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 4.19 32/52] ARM: ep93xx: Add terminator to gpiod_lookup_table Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 4.19 33/52] usb: gadget: ncm: Avoid dropping datagrams of properly parsed NTBs Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 4.19 34/52] usb: roles: dont get/set_role() when usb_role_switch is unregistered Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 4.19 35/52] IB/hfi1: Fix a memleak in init_credit_return Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 4.19 36/52] RDMA/bnxt_re: Return error for SRQ resize Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 4.19 37/52] RDMA/srpt: Support specifying the srpt_service_guid parameter Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 4.19 38/52] RDMA/ulp: Use dev_name instead of ibdev->name Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 4.19 39/52] RDMA/srpt: Make debug output more detailed Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 4.19 40/52] RDMA/srpt: fix function pointer cast warnings Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 4.19 41/52] scripts/bpf: teach bpf_helpers_doc.py to dump BPF helper definitions Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 4.19 42/52] bpf, scripts: Correct GPL license name Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 4.19 43/52] scsi: jazz_esp: Only build if SCSI core is builtin Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 4.19 44/52] nouveau: fix function cast warnings Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 4.19 45/52] ipv6: sr: fix possible use-after-free and null-ptr-deref Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 4.19 46/52] packet: move from strlcpy with unused retval to strscpy Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 4.19 47/52] s390: use the correct count for __iowrite64_copy() Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 4.19 48/52] PCI/MSI: Prevent MSI hardware interrupt number truncation Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 4.19 49/52] KVM: arm64: vgic-its: Test for valid IRQ in its_sync_lpi_pending_table() Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 4.19 50/52] KVM: arm64: vgic-its: Test for valid IRQ in MOVALL handler Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 4.19 51/52] fs/aio: Restrict kiocb_set_cancel_fn() to I/O submitted via libaio Greg Kroah-Hartman
2024-02-27 13:26 ` [PATCH 4.19 52/52] scripts/bpf: Fix xdp_md forward declaration typo Greg Kroah-Hartman
2024-02-27 18:31 ` [PATCH 4.19 00/52] 4.19.308-rc1 review Pavel Machek
2024-02-28 8:49 ` Naresh Kamboju
2024-02-28 13:39 ` Jon Hunter
2024-02-28 16:58 ` Shuah Khan
2024-02-28 18:16 ` Harshit Mogalapalli
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240227131549.358561388@linuxfoundation.org \
--to=gregkh@linuxfoundation.org \
--cc=pabeni@redhat.com \
--cc=patches@lists.linux.dev \
--cc=sashal@kernel.org \
--cc=stable@vger.kernel.org \
--cc=wintera@linux.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox