[PATCH 6.6 075/129] net: dlink: Correct endianness handling of led_mode

[Greg Kroah-Hartman <gregkh@linuxfoundation.org>]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Simon Horman <horms@kernel.org>

[ Upstream commit e7e5ae71831c44d58627a991e603845a2fed2cab ]

As it's name suggests, parse_eeprom() parses EEPROM data.

This is done by reading data, 16 bits at a time as follows:

	for (i = 0; i < 128; i++)
                ((__le16 *) sromdata)[i] = cpu_to_le16(read_eeprom(np, i));

sromdata is at the same memory location as psrom.
And the type of psrom is a pointer to struct t_SROM.

As can be seen in the loop above, data is stored in sromdata, and thus psrom,
as 16-bit little-endian values.

However, the integer fields of t_SROM are host byte order integers.
And in the case of led_mode this leads to a little endian value
being incorrectly treated as host byte order.

Looking at rio_set_led_mode, this does appear to be a bug as that code
masks led_mode with 0x1, 0x2 and 0x8. Logic that would be effected by a
reversed byte order.

This problem would only manifest on big endian hosts.

Found by inspection while investigating a sparse warning
regarding the crc field of t_SROM.

I believe that warning is a false positive. And although I plan
to send a follow-up to use little-endian types for other the integer
fields of PSROM_t I do not believe that will involve any bug fixes.

Compile tested only.

Fixes: c3f45d322cbd ("dl2k: Add support for IP1000A-based cards")
Signed-off-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250425-dlink-led-mode-v1-1-6bae3c36e736@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/dlink/dl2k.c | 2 +-
 drivers/net/ethernet/dlink/dl2k.h | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/dlink/dl2k.c b/drivers/net/ethernet/dlink/dl2k.c
index db6615aa921b1..ce46f3ac3b5a1 100644
--- a/drivers/net/ethernet/dlink/dl2k.c
+++ b/drivers/net/ethernet/dlink/dl2k.c
@@ -352,7 +352,7 @@ parse_eeprom (struct net_device *dev)
 	eth_hw_addr_set(dev, psrom->mac_addr);
 
 	if (np->chip_id == CHIP_IP1000A) {
-		np->led_mode = psrom->led_mode;
+		np->led_mode = le16_to_cpu(psrom->led_mode);
 		return 0;
 	}
 
diff --git a/drivers/net/ethernet/dlink/dl2k.h b/drivers/net/ethernet/dlink/dl2k.h
index 195dc6cfd8955..0e33e2eaae960 100644
--- a/drivers/net/ethernet/dlink/dl2k.h
+++ b/drivers/net/ethernet/dlink/dl2k.h
@@ -335,7 +335,7 @@ typedef struct t_SROM {
 	u16 sub_system_id;	/* 0x06 */
 	u16 pci_base_1;		/* 0x08 (IP1000A only) */
 	u16 pci_base_2;		/* 0x0a (IP1000A only) */
-	u16 led_mode;		/* 0x0c (IP1000A only) */
+	__le16 led_mode;	/* 0x0c (IP1000A only) */
 	u16 reserved1[9];	/* 0x0e-0x1f */
 	u8 mac_addr[6];		/* 0x20-0x25 */
 	u8 reserved2[10];	/* 0x26-0x2f */
-- 
2.39.5