[PATCH 6.14 000/183] 6.14.6-rc1 review

[PATCH 6.14 000/183] 6.14.6-rc1 review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 6.14.6 release.
There are 183 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Fri, 09 May 2025 18:37:41 +0000.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.14.6-rc1.gz
or in the git tree and branch at:
	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.14.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 6.14.6-rc1

Kent Overstreet <kent.overstreet@linux.dev>
    bcachefs: Change btree_insert_node() assertion to error

Chris Bainbridge <chris.bainbridge@gmail.com>
    drm/amd/display: Fix slab-use-after-free in hdcp

Mario Limonciello <mario.limonciello@amd.com>
    drm/amd/display: Add scoped mutexes for amdgpu_dm_dhcp

Penglei Jiang <superman.xpt@gmail.com>
    btrfs: fix the inode leak in btrfs_iget()

David Sterba <dsterba@suse.com>
    btrfs: pass struct btrfs_inode to btrfs_iget_locked()

David Sterba <dsterba@suse.com>
    btrfs: pass struct btrfs_inode to btrfs_read_locked_inode()

Qu Wenruo <wqu@suse.com>
    btrfs: expose per-inode stable writes flag

Shyam Saini <shyamsaini@linux.microsoft.com>
    drivers: base: handle module_kobject creation

Shyam Saini <shyamsaini@linux.microsoft.com>
    kernel: globalize lookup_or_create_module_kobject()

Shyam Saini <shyamsaini@linux.microsoft.com>
    kernel: param: rename locate_module_kobject

Naohiro Aota <naohiro.aota@wdc.com>
    btrfs: zoned: skip reporting zone for new block group

Naohiro Aota <naohiro.aota@wdc.com>
    block: introduce zone capacity helper

Christian Bruel <christian.bruel@foss.st.com>
    arm64: dts: st: Use 128kB size for aliased GIC400 register access on stm32mp25 SoCs

Christian Bruel <christian.bruel@foss.st.com>
    arm64: dts: st: Adjust interrupt-controller for stm32mp25 SoCs

Sébastien Szymanski <sebastien.szymanski@armadeus.com>
    ARM: dts: opos6ul: add ksz8081 phy properties

Richard Zhu <hongxing.zhu@nxp.com>
    arm64: dts: imx95: Correct the range of PCIe app-reg region

Sudeep Holla <sudeep.holla@arm.com>
    firmware: arm_ffa: Skip Rx buffer ownership release if not acquired

Cristian Marussi <cristian.marussi@arm.com>
    firmware: arm_scmi: Balance device refcount when destroying devices

Cong Wang <xiyou.wangcong@gmail.com>
    sch_ets: make est_qlen_notify() idempotent

Cong Wang <xiyou.wangcong@gmail.com>
    sch_qfq: make qfq_qlen_notify() idempotent

Cong Wang <xiyou.wangcong@gmail.com>
    sch_hfsc: make hfsc_qlen_notify() idempotent

Cong Wang <xiyou.wangcong@gmail.com>
    sch_drr: make drr_qlen_notify() idempotent

Cong Wang <xiyou.wangcong@gmail.com>
    sch_htb: make htb_qlen_notify() idempotent

Ming Lei <ming.lei@redhat.com>
    ublk: fix race between io_uring_cmd_complete_in_task and ublk_cancel_cmd

Ming Lei <ming.lei@redhat.com>
    ublk: simplify aborting ublk request

Ming Lei <ming.lei@redhat.com>
    ublk: remove __ublk_quiesce_dev()

Uday Shankar <ushankar@purestorage.com>
    ublk: improve detection and handling of ublk server exit

Ming Lei <ming.lei@redhat.com>
    ublk: move device reset into ublk_ch_release()

Uday Shankar <ushankar@purestorage.com>
    ublk: properly serialize all FETCH_REQs

Ming Lei <ming.lei@redhat.com>
    ublk: add helper of ublk_need_map_io()

Kurt Borja <kuurtb@gmail.com>
    platform/x86: alienware-wmi-wmax: Add support for Alienware m15 R7

Kenneth Graunke <kenneth@whitecape.org>
    drm/xe: Invalidate L3 read-only cachelines for geometry streams too

Karol Wachowski <karol.wachowski@intel.com>
    accel/ivpu: Add handling of VPU_JSM_STATUS_MVNCI_CONTEXT_VIOLATION_HW

Karol Wachowski <karol.wachowski@intel.com>
    accel/ivpu: Fix locking order in ivpu_job_submit

Karol Wachowski <karol.wachowski@intel.com>
    accel/ivpu: Abort all jobs after command queue unregister

Zhenhua Huang <quic_zhenhuah@quicinc.com>
    mm, slab: clean up slab->obj_exts always

Stefan Wahren <wahrenst@gmx.net>
    net: vertexcom: mse102x: Fix RX error handling

Stefan Wahren <wahrenst@gmx.net>
    net: vertexcom: mse102x: Add range check for CMD_RTS

Stefan Wahren <wahrenst@gmx.net>
    net: vertexcom: mse102x: Fix LEN_MASK

Stefan Wahren <wahrenst@gmx.net>
    net: vertexcom: mse102x: Fix possible stuck of SPI interrupt

Jian Shen <shenjian15@huawei.com>
    net: hns3: defer calling ptp_clock_register()

Hao Lan <lanhao@huawei.com>
    net: hns3: fixed debugfs tm_qset size

Yonglong Liu <liuyonglong@huawei.com>
    net: hns3: fix an interrupt residual problem

Jian Shen <shenjian15@huawei.com>
    net: hns3: store rx VLAN tag offload state for VF

Sathesh B Edara <sedara@marvell.com>
    octeon_ep: Fix host hang issue during device reboot

Mattias Barthel <mattias.barthel@atlascopco.com>
    net: fec: ERR007885 Workaround for conventional TX

Thangaraj Samynathan <thangaraj.s@microchip.com>
    net: lan743x: Fix memleak issue when GSO enabled

Sagi Maimon <sagi.maimon@adtran.com>
    ptp: ocp: Fix NULL dereference in Adva board SMA sysfs operations

Jibin Zhang <jibin.zhang@mediatek.com>
    net: use sock_gen_put() when sk_state is TCP_TIME_WAIT

Vadim Fedorenko <vadim.fedorenko@linux.dev>
    bnxt_en: fix module unload sequence

Alexander Stein <alexander.stein@ew.tq-group.com>
    ASoC: simple-card-utils: Fix pointer check in graph_util_parse_link_direction

Olivier Moysan <olivier.moysan@foss.st.com>
    ASoC: stm32: sai: add a check on minimal kernel frequency

Olivier Moysan <olivier.moysan@foss.st.com>
    ASoC: stm32: sai: skip useless iterations on kernel rate loop

Alistair Francis <alistair.francis@wdc.com>
    nvmet-tcp: select CONFIG_TLS from CONFIG_NVME_TARGET_TCP_TLS

Alistair Francis <alistair23@gmail.com>
    nvme-tcp: select CONFIG_TLS from CONFIG_NVME_TCP_TLS

Michael Liang <mliang@purestorage.com>
    nvme-tcp: fix premature queue removal and I/O failover

Michael Chan <michael.chan@broadcom.com>
    bnxt_en: Fix ethtool -d byte order for 32-bit values

Shruti Parab <shruti.parab@broadcom.com>
    bnxt_en: Fix out-of-bound memcpy() during ethtool -w

Shruti Parab <shruti.parab@broadcom.com>
    bnxt_en: Fix coredump logic to free allocated buffer

Kashyap Desai <kashyap.desai@broadcom.com>
    bnxt_en: call pci_alloc_irq_vectors() after bnxt_reserve_rings()

Somnath Kotur <somnath.kotur@broadcom.com>
    bnxt_en: Add missing skb_mark_for_recycle() in bnxt_rx_vlan()

Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
    bnxt_en: Fix ethtool selftest output in one of the failure cases

Shravya KN <shravya.k-n@broadcom.com>
    bnxt_en: Fix error handling path in bnxt_init_chip()

Takashi Iwai <tiwai@suse.de>
    ALSA: hda/realtek: Fix built-mic regression on other ASUS models

Felix Fietkau <nbd@nbd.name>
    net: ipv6: fix UDPv6 GSO segmentation with NAT

Vladimir Oltean <vladimir.oltean@nxp.com>
    net: dsa: felix: fix broken taprio gate states after clock jump

Chad Monroe <chad@monroe.io>
    net: ethernet: mtk_eth_soc: fix SER panic with 4GB+ RAM

Jacob Keller <jacob.e.keller@intel.com>
    igc: fix lock order in igc_ptp_reset

Larysa Zaremba <larysa.zaremba@intel.com>
    idpf: protect shutdown from reset

Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
    idpf: fix potential memory leak on kcalloc() failure

Da Xue <da@libre.computer>
    net: mdio: mux-meson-gxl: set reversed bit when using internal phy

Simon Horman <horms@kernel.org>
    net: dlink: Correct endianness handling of led_mode

Russell Cloran <rcloran@gmail.com>
    drm/mipi-dbi: Fix blanking for non-16 bit formats

Maxime Ripard <mripard@kernel.org>
    drm/tests: shmem: Fix memleak

Keith Busch <kbusch@kernel.org>
    nvme-pci: fix queue unquiesce check on slot_reset

Takashi Iwai <tiwai@suse.de>
    ALSA: ump: Fix buffer overflow at UMP SysEx message conversion

Maulik Shah <maulik.shah@oss.qualcomm.com>
    pinctrl: qcom: Fix PINGROUP definition for sm8750

John Harrison <John.C.Harrison@Intel.com>
    drm/xe/guc: Fix capture of steering registers

Keoseong Park <keosung.park@samsung.com>
    scsi: ufs: core: Remove redundant query_complete trace

Madhu Chittim <madhu.chittim@intel.com>
    idpf: fix offloads support for encapsulated packets

Xuanqiang Luo <luoxuanqiang@kylinos.cn>
    ice: Check VF VSI Pointer Value in ice_vc_add_fdir_fltr()

Paul Greenwalt <paul.greenwalt@intel.com>
    ice: fix Get Tx Topology AQ command error on E830

Karol Kolacinski <karol.kolacinski@intel.com>
    ice: Remove unnecessary ice_is_e8xx() functions

Karol Kolacinski <karol.kolacinski@intel.com>
    ice: Don't check device type when checking GNSS presence

Victor Nogueira <victor@mojatatu.com>
    net_sched: qfq: Fix double list add in class with netem as child qdisc

Victor Nogueira <victor@mojatatu.com>
    net_sched: ets: Fix double list add in class with netem as child qdisc

Victor Nogueira <victor@mojatatu.com>
    net_sched: hfsc: Fix a UAF vulnerability in class with netem as child qdisc

Victor Nogueira <victor@mojatatu.com>
    net_sched: drr: Fix double list add in class with netem as child qdisc

Shannon Nelson <shannon.nelson@amd.com>
    pds_core: remove write-after-free of client_id

Shannon Nelson <shannon.nelson@amd.com>
    pds_core: specify auxiliary_device to be created

Shannon Nelson <shannon.nelson@amd.com>
    pds_core: make pdsc_auxbus_dev_del() void

Daniel Golle <daniel@makrotopia.org>
    net: ethernet: mtk_eth_soc: sync mtk_clks_source_name array

Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
    net: ethernet: mtk-star-emac: rearm interrupts in rx_poll only when advised

Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
    net: ethernet: mtk-star-emac: fix spinlock recursion issues on rx/tx poll

Justin Lai <justinlai0215@realtek.com>
    rtase: Modify the condition used to detect overflow in rtase_calc_time_mitigation

Vadim Fedorenko <vadim.fedorenko@linux.dev>
    bnxt_en: improve TX timestamping FIFO configuration

Sathesh B Edara <sedara@marvell.com>
    octeon_ep_vf: Resolve netdevice usage count issue

Vladimir Oltean <vladimir.oltean@nxp.com>
    net: mscc: ocelot: delete PVID VLAN when readding it as non-PVID

Pauli Virtanen <pav@iki.fi>
    Bluetooth: L2CAP: copy RX timestamp to new fragments

Kiran K <kiran.k@intel.com>
    Bluetooth: btintel_pcie: Add additional to checks to clear TX/RX paths

En-Wei Wu <en-wei.wu@canonical.com>
    Bluetooth: btusb: avoid NULL pointer dereference in skb_dequeue()

Kiran K <kiran.k@intel.com>
    Bluetooth: btintel_pcie: Avoid redundant buffer allocation

Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
    Bluetooth: hci_conn: Fix not setting timeout for BIG Create Sync

Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
    Bluetooth: hci_conn: Fix not setting conn_timeout for Broadcast Receiver

Viresh Kumar <viresh.kumar@linaro.org>
    cpufreq: ACPI: Re-sync CPU boost state on system resume

Viresh Kumar <viresh.kumar@linaro.org>
    cpufreq: acpi: Set policy->boost_supported

Viresh Kumar <viresh.kumar@linaro.org>
    cpufreq: Introduce policy->boost_supported flag

Venkata Prasad Potturu <venkataprasad.potturu@amd.com>
    ASoC: amd: acp: Fix NULL pointer deref in acp_i2s_set_tdm_slot

Raju Rangoju <Raju.Rangoju@amd.com>
    spi: spi-mem: Add fix to avoid divide error

Karol Wachowski <karol.wachowski@intel.com>
    accel/ivpu: Correct DCT interrupt handling

Chris Mi <cmi@nvidia.com>
    net/mlx5: E-switch, Fix error handling for enabling roce

Cosmin Ratiu <cratiu@nvidia.com>
    net/mlx5e: Fix lock order in mlx5e_tx_reporter_ptpsq_unhealthy_recover

Jianbo Liu <jianbol@nvidia.com>
    net/mlx5e: TC, Continue the attr process even if encap entry is invalid

Maor Gottlieb <maorg@nvidia.com>
    net/mlx5: E-Switch, Initialize MAC Address for Default GID

Vlad Dogaru <vdogaru@nvidia.com>
    net/mlx5e: Use custom tunnel header for vxlan gbp

e.kubanski <e.kubanski@partner.samsung.com>
    xsk: Fix offset calculation in unaligned mode

e.kubanski <e.kubanski@partner.samsung.com>
    xsk: Fix race condition in AF_XDP generic RX path

Ido Schimmel <idosch@nvidia.com>
    vxlan: vnifilter: Fix unlocked deletion of default FDB entry

Madhavan Srinivasan <maddy@linux.ibm.com>
    powerpc/boot: Fix dash warning

Murad Masimov <m.masimov@mt-integration.ru>
    wifi: plfxlc: Remove erroneous assert in plfxlc_mac_release

Emmanuel Grumbach <emmanuel.grumbach@intel.com>
    wifi: iwlwifi: fix the check for the SCRATCH register upon resume

Emmanuel Grumbach <emmanuel.grumbach@intel.com>
    wifi: iwlwifi: don't warn if the NIC is gone in resume

Johannes Berg <johannes.berg@intel.com>
    wifi: iwlwifi: back off on continuous errors

Chen Linxuan <chenlinxuan@uniontech.com>
    drm/i915/pxp: fix undefined reference to `intel_pxp_gsccs_is_ready_for_sessions'

Kailang Yang <kailang@realtek.com>
    ALSA: hda/realtek - Enable speaker for HP platform

Aneesh Kumar K.V (Arm) <aneesh.kumar@kernel.org>
    iommu/arm-smmu-v3: Add missing S2FWB feature detection

Chenyuan Yang <chenyuan0y@gmail.com>
    ASoC: Intel: sof_sdw: Add NULL check in asoc_sdw_rt_dmic_rtd_init()

Madhavan Srinivasan <maddy@linux.ibm.com>
    powerpc/boot: Check for ld-option support

Hui Wang <hui.wang@canonical.com>
    pinctrl: imx: Return NULL if no group is matched and found

Anthony Iliopoulos <ailiop@suse.com>
    powerpc64/ftrace: fix module loading without patchable function entries

Donet Tom <donettom@linux.ibm.com>
    book3s64/radix : Align section vmemmap start address to PAGE_SIZE

Sheetal <sheetal@nvidia.com>
    ASoC: soc-pcm: Fix hw_params() and DAPM widget sequence

Nico Pache <npache@redhat.com>
    firmware: cs_dsp: tests: Depend on FW_CS_DSP rather then enabling it

Richard Fitzgerald <rf@opensource.cirrus.com>
    ASoC: cs-amp-lib-test: Don't select SND_SOC_CS_AMP_LIB

Geert Uytterhoeven <geert+renesas@glider.be>
    ASoC: soc-core: Stop using of_property_read_bool() for non-boolean properties

Leo Li <sunpeng.li@amd.com>
    drm/amd/display: Default IPS to RCG_IN_ACTIVE_IPS2_IN_OFF

Alan Huang <mmpgouride@gmail.com>
    bcachefs: Remove incorrect __counted_by annotation

Jeongjun Park <aha310510@gmail.com>
    tracing: Fix oob write in trace_seq_to_buffer()

Rafael J. Wysocki <rafael.j.wysocki@intel.com>
    cpufreq: Fix setting policy limits when frequency tables are used

Rafael J. Wysocki <rafael.j.wysocki@intel.com>
    cpufreq: Avoid using inconsistent policy->min and policy->max

Jethro Donaldson <devel@jro.nz>
    smb: client: fix zero length for mkdir POSIX create context

Sean Heelan <seanheelan@gmail.com>
    ksmbd: fix use-after-free in session logoff

Sean Heelan <seanheelan@gmail.com>
    ksmbd: fix use-after-free in kerberos authentication

Namjae Jeon <linkinjeon@kernel.org>
    ksmbd: fix use-after-free in ksmbd_session_rpc_open

Shouye Liu <shouyeliu@tencent.com>
    platform/x86/intel-uncore-freq: Fix missing uncore sysfs during CPU hotplug

Mario Limonciello <mario.limonciello@amd.com>
    platform/x86/amd: pmc: Require at least 2.5 seconds between HW sleep cycles

Nicolin Chen <nicolinc@nvidia.com>
    iommu: Fix two issues in iommu_copy_struct_from_user()

Mingcong Bai <jeffbai@aosc.io>
    iommu/vt-d: Apply quirk_iommu_igfx for 8086:0044 (QM57/QS57)

Balbir Singh <balbirs@nvidia.com>
    iommu/arm-smmu-v3: Fix pgsize_bit for sva domains

Nicolin Chen <nicolinc@nvidia.com>
    iommu/arm-smmu-v3: Fix iommu_device_probe bug due to duplicated stream ids

Pavel Paklov <Pavel.Paklov@cyberprotect.ru>
    iommu/amd: Fix potential buffer overflow in parse_ivrs_acpihid

Janne Grunau <j@jannau.net>
    drm: Select DRM_KMS_HELPER from DRM_DEBUG_DP_MST_TOPOLOGY_REFS

Lijo Lazar <lijo.lazar@amd.com>
    drm/amdgpu: Fix offset for HDP remap in nbio v7.11

Benjamin Marzinski <bmarzins@redhat.com>
    dm: always update the array size in realloc_argv on success

Mikulas Patocka <mpatocka@redhat.com>
    dm-integrity: fix a warning on invalid table line

LongPing Wei <weilongping@oppo.com>
    dm-bufio: don't schedule in atomic context

Ard Biesheuvel <ardb@kernel.org>
    x86/boot/sev: Support memory acceptance in the EFI stub under SVSM

Wentao Liang <vulab@iscas.ac.cn>
    wifi: brcm80211: fmac: Add error handling for brcmf_usb_dl_writeimage()

Steven Rostedt <rostedt@goodmis.org>
    tracing: Do not take trace_event_sem in print_event_fields()

Aaron Kling <webgeek1234@gmail.com>
    spi: tegra114: Don't fail set_cs_timing when delays are zero

Ruslan Piasetskyi <ruslan.piasetskyi@gmail.com>
    mmc: renesas_sdhi: Fix error handling in renesas_sdhi_probe

Wei Yang <richard.weiyang@gmail.com>
    mm/memblock: repeat setting reserved region nid if array is doubled

Wei Yang <richard.weiyang@gmail.com>
    mm/memblock: pass size instead of end to memblock_set_node()

Stephan Gerhold <stephan.gerhold@linaro.org>
    irqchip/qcom-mpm: Prevent crash when trying to handle non-wake GPIOs

Vishal Badole <Vishal.Badole@amd.com>
    amd-xgbe: Fix to ensure dependent features are toggled with RX checksum offload

Sean Christopherson <seanjc@google.com>
    perf/x86/intel: KVM: Mask PEBS_ENABLE loaded for guest with vCPU's value.

Kan Liang <kan.liang@linux.intel.com>
    perf/x86/intel: Only check the group flag for X86 leader

Christian Marangi <ansuelsmth@gmail.com>
    pinctrl: airoha: fix wrong PHY LED mapping and PHY2 LED defines

Helge Deller <deller@gmx.de>
    parisc: Fix double SIGFPE crash

Will Deacon <will@kernel.org>
    arm64: errata: Add missing sentinels to Spectre-BHB MIDR arrays

Clark Wang <xiaoning.wang@nxp.com>
    i2c: imx-lpi2c: Fix clock count when probe defers

Niravkumar L Rabara <niravkumar.l.rabara@altera.com>
    EDAC/altera: Set DDR and SDMMC interrupt mask before registration

Niravkumar L Rabara <niravkumar.l.rabara@altera.com>
    EDAC/altera: Test the correct error reg offset

Philipp Stanner <phasta@kernel.org>
    drm/nouveau: Fix WARN_ON in nouveau_fence_context_kill()

Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
    drm/fdinfo: Protect against driver unbind

Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
    cpufreq: intel_pstate: Unchecked MSR aceess in legacy mode

Dave Chen <davechen@synology.com>
    btrfs: fix COW handling in run_delalloc_nocow()

Josef Bacik <josef@toxicpanda.com>
    btrfs: adjust subpage bit start based on sectorsize

Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
    ASoC: renesas: rz-ssi: Use NOIRQ_SYSTEM_SLEEP_PM_OPS()

Joachim Priesner <joachim.priesner@web.de>
    ALSA: usb-audio: Add second USB ID for Jabra Evolve 65 headset

Geoffrey D. Bennett <g@b4.vu>
    ALSA: usb-audio: Add retry on -EPROTO from usb_set_interface()

Chris Chiu <chris.chiu@canonical.com>
    ALSA: hda/realtek - Add more HP laptops which need mute led fixup

Christian Heusel <christian@heusel.eu>
    Revert "rndis_host: Flag RNDIS modems as WWAN devices"


-------------

Diffstat:

 Makefile                                           |   4 +-
 .../boot/dts/nxp/imx/imx6ul-imx6ull-opos6ul.dtsi   |   3 +
 arch/arm64/boot/dts/freescale/imx95.dtsi           |   8 +-
 arch/arm64/boot/dts/st/stm32mp251.dtsi             |   9 +-
 arch/arm64/kernel/proton-pack.c                    |   2 +
 arch/parisc/math-emu/driver.c                      |  16 +-
 arch/powerpc/boot/wrapper                          |   6 +-
 arch/powerpc/kernel/module_64.c                    |   4 -
 arch/powerpc/mm/book3s64/radix_pgtable.c           |  17 +-
 arch/x86/boot/compressed/mem.c                     |   5 +-
 arch/x86/boot/compressed/sev.c                     |  40 ++
 arch/x86/boot/compressed/sev.h                     |   2 +
 arch/x86/events/core.c                             |   2 +-
 arch/x86/events/intel/core.c                       |   2 +-
 arch/x86/events/perf_event.h                       |   9 +-
 drivers/accel/ivpu/ivpu_drv.c                      |  32 +-
 drivers/accel/ivpu/ivpu_drv.h                      |   2 +
 drivers/accel/ivpu/ivpu_hw_btrs.h                  |   2 +-
 drivers/accel/ivpu/ivpu_job.c                      | 111 ++++-
 drivers/accel/ivpu/ivpu_job.h                      |   1 +
 drivers/accel/ivpu/ivpu_mmu.c                      |   3 +-
 drivers/accel/ivpu/ivpu_pm.c                       |  18 +-
 drivers/accel/ivpu/ivpu_sysfs.c                    |   5 +-
 drivers/base/module.c                              |  13 +-
 drivers/block/ublk_drv.c                           | 552 +++++++++++----------
 drivers/bluetooth/btintel_pcie.c                   |  57 ++-
 drivers/bluetooth/btusb.c                          | 101 ++--
 drivers/cpufreq/acpi-cpufreq.c                     |  14 +
 drivers/cpufreq/cpufreq.c                          |  42 +-
 drivers/cpufreq/cpufreq_ondemand.c                 |   3 +-
 drivers/cpufreq/freq_table.c                       |  10 +-
 drivers/cpufreq/intel_pstate.c                     |   3 +
 drivers/edac/altera_edac.c                         |   9 +-
 drivers/edac/altera_edac.h                         |   2 +
 drivers/firmware/arm_ffa/driver.c                  |   3 +-
 drivers/firmware/arm_scmi/bus.c                    |   3 +
 drivers/firmware/cirrus/Kconfig                    |   5 +-
 drivers/gpu/drm/Kconfig                            |   2 +-
 drivers/gpu/drm/amd/amdgpu/nbio_v7_11.c            |   2 +-
 drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c  |  20 -
 .../gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_hdcp.c |  56 +--
 drivers/gpu/drm/drm_file.c                         |   6 +
 drivers/gpu/drm/drm_mipi_dbi.c                     |   6 +-
 drivers/gpu/drm/i915/pxp/intel_pxp_gsccs.h         |   8 +-
 drivers/gpu/drm/nouveau/nouveau_fence.c            |   2 +-
 drivers/gpu/drm/tests/drm_gem_shmem_test.c         |   3 +
 drivers/gpu/drm/xe/instructions/xe_gpu_commands.h  |   1 +
 drivers/gpu/drm/xe/xe_guc_capture.c                |   2 +-
 drivers/gpu/drm/xe/xe_ring_ops.c                   |  13 +-
 drivers/i2c/busses/i2c-imx-lpi2c.c                 |   4 +-
 drivers/iommu/amd/init.c                           |   8 +
 drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3-sva.c    |   6 +
 drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c        |  21 +-
 drivers/iommu/intel/iommu.c                        |   4 +-
 drivers/irqchip/irq-qcom-mpm.c                     |   3 +
 drivers/md/dm-bufio.c                              |   9 +-
 drivers/md/dm-integrity.c                          |   2 +-
 drivers/md/dm-table.c                              |   5 +-
 drivers/mmc/host/renesas_sdhi_core.c               |  10 +-
 drivers/net/dsa/ocelot/felix_vsc9959.c             |   5 +-
 drivers/net/ethernet/amd/pds_core/auxbus.c         |  39 +-
 drivers/net/ethernet/amd/pds_core/core.h           |   7 +-
 drivers/net/ethernet/amd/pds_core/devlink.c        |   7 +-
 drivers/net/ethernet/amd/pds_core/main.c           |  11 +-
 drivers/net/ethernet/amd/xgbe/xgbe-desc.c          |   9 +-
 drivers/net/ethernet/amd/xgbe/xgbe-dev.c           |  24 +-
 drivers/net/ethernet/amd/xgbe/xgbe-drv.c           |  11 +-
 drivers/net/ethernet/amd/xgbe/xgbe.h               |   4 +
 drivers/net/ethernet/broadcom/bnxt/bnxt.c          |  18 +-
 drivers/net/ethernet/broadcom/bnxt/bnxt_coredump.c |  30 +-
 drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c  |  38 +-
 drivers/net/ethernet/broadcom/bnxt/bnxt_ptp.c      |  29 +-
 drivers/net/ethernet/broadcom/bnxt/bnxt_ptp.h      |   1 +
 drivers/net/ethernet/dlink/dl2k.c                  |   2 +-
 drivers/net/ethernet/dlink/dl2k.h                  |   2 +-
 drivers/net/ethernet/freescale/fec_main.c          |   7 +-
 drivers/net/ethernet/hisilicon/hns3/hns3_debugfs.c |   2 +-
 drivers/net/ethernet/hisilicon/hns3/hns3_enet.c    |  82 ++-
 .../net/ethernet/hisilicon/hns3/hns3pf/hclge_ptp.c |  13 +-
 .../ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c  |  25 +-
 .../ethernet/hisilicon/hns3/hns3vf/hclgevf_main.h  |   1 +
 drivers/net/ethernet/intel/ice/ice.h               |   5 -
 drivers/net/ethernet/intel/ice/ice_common.c        | 208 ++++----
 drivers/net/ethernet/intel/ice/ice_common.h        |   7 +-
 drivers/net/ethernet/intel/ice/ice_ddp.c           |  10 +-
 drivers/net/ethernet/intel/ice/ice_gnss.c          |  31 +-
 drivers/net/ethernet/intel/ice/ice_gnss.h          |   4 +-
 drivers/net/ethernet/intel/ice/ice_lib.c           |   2 +-
 drivers/net/ethernet/intel/ice/ice_ptp.c           | 137 ++---
 drivers/net/ethernet/intel/ice/ice_ptp_hw.c        | 235 +++------
 drivers/net/ethernet/intel/ice/ice_ptp_hw.h        |  11 +-
 drivers/net/ethernet/intel/ice/ice_type.h          |   9 -
 drivers/net/ethernet/intel/ice/ice_virtchnl_fdir.c |   5 +
 drivers/net/ethernet/intel/idpf/idpf.h             |  18 +-
 drivers/net/ethernet/intel/idpf/idpf_lib.c         |  76 ++-
 drivers/net/ethernet/intel/idpf/idpf_main.c        |   1 +
 drivers/net/ethernet/intel/igc/igc_ptp.c           |   6 +-
 .../net/ethernet/marvell/octeon_ep/octep_main.c    |   2 +-
 .../ethernet/marvell/octeon_ep_vf/octep_vf_main.c  |   4 +-
 drivers/net/ethernet/mediatek/mtk_eth_soc.c        |  18 +-
 drivers/net/ethernet/mediatek/mtk_star_emac.c      |  13 +-
 .../ethernet/mellanox/mlx5/core/en/reporter_tx.c   |   6 +-
 .../ethernet/mellanox/mlx5/core/en/tc_tun_vxlan.c  |  32 +-
 drivers/net/ethernet/mellanox/mlx5/core/en_tc.c    |   5 +-
 .../ethernet/mellanox/mlx5/core/eswitch_offloads.c |   5 +-
 drivers/net/ethernet/mellanox/mlx5/core/rdma.c     |  11 +-
 drivers/net/ethernet/mellanox/mlx5/core/rdma.h     |   4 +-
 drivers/net/ethernet/microchip/lan743x_main.c      |   8 +-
 drivers/net/ethernet/microchip/lan743x_main.h      |   1 +
 drivers/net/ethernet/mscc/ocelot.c                 |   6 +
 drivers/net/ethernet/realtek/rtase/rtase_main.c    |   4 +-
 drivers/net/ethernet/vertexcom/mse102x.c           |  36 +-
 drivers/net/mdio/mdio-mux-meson-gxl.c              |   3 +-
 drivers/net/usb/rndis_host.c                       |  16 +-
 drivers/net/vxlan/vxlan_vnifilter.c                |   8 +-
 .../net/wireless/broadcom/brcm80211/brcmfmac/usb.c |   6 +-
 drivers/net/wireless/intel/iwlwifi/iwl-csr.h       |   1 +
 drivers/net/wireless/intel/iwlwifi/iwl-trans.c     |  28 +-
 drivers/net/wireless/intel/iwlwifi/iwl-trans.h     |   7 +-
 drivers/net/wireless/intel/iwlwifi/pcie/drv.c      |  24 +-
 drivers/net/wireless/intel/iwlwifi/pcie/internal.h |   9 +-
 drivers/net/wireless/intel/iwlwifi/pcie/trans.c    |  16 +-
 drivers/net/wireless/intel/iwlwifi/pcie/tx.c       |   2 +-
 drivers/net/wireless/purelifi/plfxlc/mac.c         |   1 -
 drivers/nvme/host/Kconfig                          |   1 +
 drivers/nvme/host/pci.c                            |   2 +-
 drivers/nvme/host/tcp.c                            |  31 +-
 drivers/nvme/target/Kconfig                        |   1 +
 drivers/pinctrl/freescale/pinctrl-imx.c            |   6 +-
 drivers/pinctrl/mediatek/pinctrl-airoha.c          | 159 +++---
 drivers/pinctrl/qcom/pinctrl-sm8750.c              |   4 +-
 drivers/platform/x86/amd/pmc/pmc.c                 |   7 +-
 drivers/platform/x86/dell/alienware-wmi.c          |   9 +
 .../x86/intel/uncore-frequency/uncore-frequency.c  |  13 +-
 drivers/ptp/ptp_ocp.c                              |  52 +-
 drivers/spi/spi-mem.c                              |   6 +-
 drivers/spi/spi-tegra114.c                         |   6 +-
 drivers/ufs/core/ufshcd.c                          |   2 -
 fs/bcachefs/btree_update_interior.c                |  17 +-
 fs/bcachefs/error.c                                |   8 +
 fs/bcachefs/error.h                                |   2 +
 fs/bcachefs/xattr_format.h                         |   8 +-
 fs/btrfs/btrfs_inode.h                             |   8 +
 fs/btrfs/extent_io.c                               |   2 +-
 fs/btrfs/file.c                                    |   1 -
 fs/btrfs/inode.c                                   | 152 +++---
 fs/btrfs/ioctl.c                                   |   1 +
 fs/btrfs/zoned.c                                   |  18 +-
 fs/smb/client/smb2pdu.c                            |   1 +
 fs/smb/server/auth.c                               |  14 +-
 fs/smb/server/mgmt/user_session.c                  |  20 +-
 fs/smb/server/mgmt/user_session.h                  |   1 +
 fs/smb/server/smb2pdu.c                            |   9 -
 include/linux/blkdev.h                             |  67 ++-
 include/linux/cpufreq.h                            |  86 ++--
 include/linux/iommu.h                              |   8 +-
 include/linux/module.h                             |   2 +
 include/net/bluetooth/hci.h                        |   4 +-
 include/net/bluetooth/hci_core.h                   |  20 +-
 include/net/bluetooth/hci_sync.h                   |   3 +
 include/net/xdp_sock.h                             |   3 -
 include/net/xsk_buff_pool.h                        |   4 +-
 include/sound/ump_convert.h                        |   2 +-
 kernel/params.c                                    |   6 +-
 kernel/trace/trace.c                               |   5 +-
 kernel/trace/trace_output.c                        |   4 +-
 mm/memblock.c                                      |  12 +-
 mm/slub.c                                          |  27 +-
 net/bluetooth/hci_conn.c                           | 181 +------
 net/bluetooth/hci_event.c                          |  15 +-
 net/bluetooth/hci_sync.c                           | 150 +++++-
 net/bluetooth/iso.c                                |  26 +-
 net/bluetooth/l2cap_core.c                         |   3 +
 net/ipv4/tcp_offload.c                             |   2 +-
 net/ipv4/udp_offload.c                             |  61 ++-
 net/ipv6/tcpv6_offload.c                           |   2 +-
 net/sched/sch_drr.c                                |  16 +-
 net/sched/sch_ets.c                                |  17 +-
 net/sched/sch_hfsc.c                               |  10 +-
 net/sched/sch_htb.c                                |   2 +
 net/sched/sch_qfq.c                                |  18 +-
 net/xdp/xsk.c                                      |   6 +-
 net/xdp/xsk_buff_pool.c                            |   1 +
 sound/pci/hda/patch_realtek.c                      |  23 +-
 sound/soc/amd/acp/acp-i2s.c                        |   2 +-
 sound/soc/codecs/Kconfig                           |   5 +-
 sound/soc/generic/simple-card-utils.c              |   4 +-
 sound/soc/renesas/rz-ssi.c                         |   2 +-
 sound/soc/sdw_utils/soc_sdw_rt_dmic.c              |   2 +
 sound/soc/soc-core.c                               |  32 +-
 sound/soc/soc-pcm.c                                |   5 +-
 sound/soc/stm/stm32_sai_sub.c                      |  16 +-
 sound/usb/endpoint.c                               |   7 +
 sound/usb/format.c                                 |   3 +-
 194 files changed, 2373 insertions(+), 1773 deletions(-)

[PATCH 6.14 001/183] Revert "rndis_host: Flag RNDIS modems as WWAN devices"

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Christian Heusel <christian@heusel.eu>

commit 765f253e28909f161b0211f85cf0431cfee7d6df upstream.

This reverts commit 67d1a8956d2d62fe6b4c13ebabb57806098511d8. Since this
commit has been proven to be problematic for the setup of USB-tethered
ethernet connections and the related breakage is very noticeable for
users it should be reverted until a fixed version of the change can be
rolled out.

Closes: https://lore.kernel.org/all/e0df2d85-1296-4317-b717-bd757e3ab928@heusel.eu/
Link: https://chaos.social/@gromit/114377862699921553
Link: https://bugzilla.kernel.org/show_bug.cgi?id=220002
Link: https://bugs.gentoo.org/953555
Link: https://bbs.archlinux.org/viewtopic.php?id=304892
Cc: stable@vger.kernel.org
Acked-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Christian Heusel <christian@heusel.eu>
Link: https://patch.msgid.link/20250424-usb-tethering-fix-v1-1-b65cf97c740e@heusel.eu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/usb/rndis_host.c |   16 ++--------------
 1 file changed, 2 insertions(+), 14 deletions(-)

--- a/drivers/net/usb/rndis_host.c
+++ b/drivers/net/usb/rndis_host.c
@@ -630,16 +630,6 @@ static const struct driver_info	zte_rndi
 	.tx_fixup =	rndis_tx_fixup,
 };
 
-static const struct driver_info	wwan_rndis_info = {
-	.description =	"Mobile Broadband RNDIS device",
-	.flags =	FLAG_WWAN | FLAG_POINTTOPOINT | FLAG_FRAMING_RN | FLAG_NO_SETINT,
-	.bind =		rndis_bind,
-	.unbind =	rndis_unbind,
-	.status =	rndis_status,
-	.rx_fixup =	rndis_rx_fixup,
-	.tx_fixup =	rndis_tx_fixup,
-};
-
 /*-------------------------------------------------------------------------*/
 
 static const struct usb_device_id	products [] = {
@@ -676,11 +666,9 @@ static const struct usb_device_id	produc
 	USB_INTERFACE_INFO(USB_CLASS_WIRELESS_CONTROLLER, 1, 3),
 	.driver_info = (unsigned long) &rndis_info,
 }, {
-	/* Mobile Broadband Modem, seen in Novatel Verizon USB730L and
-	 * Telit FN990A (RNDIS)
-	 */
+	/* Novatel Verizon USB730L */
 	USB_INTERFACE_INFO(USB_CLASS_MISC, 4, 1),
-	.driver_info = (unsigned long)&wwan_rndis_info,
+	.driver_info = (unsigned long) &rndis_info,
 },
 	{ },		// END
 };

[PATCH 6.14 002/183] ALSA: hda/realtek - Add more HP laptops which need mute led fixup

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Chris Chiu <chris.chiu@canonical.com>

commit 63f5235e0291152a2ac2c4ef3c1196cb6dfb3ef7 upstream.

More HP EliteBook with Realtek HDA codec ALC3247 and combined CS35L56
Amplifiers need quirk ALC236_FIXUP_HP_GPIO_LED to fix the micmute LED.

Signed-off-by: Chris Chiu <chris.chiu@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20250430101843.150833-1-chris.chiu@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/pci/hda/patch_realtek.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -10732,8 +10732,11 @@ static const struct hda_quirk alc269_fix
 	SND_PCI_QUIRK(0x103c, 0x8de8, "HP Gemtree", ALC245_FIXUP_TAS2781_SPI_2),
 	SND_PCI_QUIRK(0x103c, 0x8de9, "HP Gemtree", ALC245_FIXUP_TAS2781_SPI_2),
 	SND_PCI_QUIRK(0x103c, 0x8dec, "HP EliteBook 640 G12", ALC236_FIXUP_HP_GPIO_LED),
+	SND_PCI_QUIRK(0x103c, 0x8ded, "HP EliteBook 640 G12", ALC236_FIXUP_HP_GPIO_LED),
 	SND_PCI_QUIRK(0x103c, 0x8dee, "HP EliteBook 660 G12", ALC236_FIXUP_HP_GPIO_LED),
+	SND_PCI_QUIRK(0x103c, 0x8def, "HP EliteBook 660 G12", ALC236_FIXUP_HP_GPIO_LED),
 	SND_PCI_QUIRK(0x103c, 0x8df0, "HP EliteBook 630 G12", ALC236_FIXUP_HP_GPIO_LED),
+	SND_PCI_QUIRK(0x103c, 0x8df1, "HP EliteBook 630 G12", ALC236_FIXUP_HP_GPIO_LED),
 	SND_PCI_QUIRK(0x103c, 0x8dfc, "HP EliteBook 645 G12", ALC236_FIXUP_HP_GPIO_LED),
 	SND_PCI_QUIRK(0x103c, 0x8dfe, "HP EliteBook 665 G12", ALC236_FIXUP_HP_GPIO_LED),
 	SND_PCI_QUIRK(0x103c, 0x8e14, "HP ZBook Firefly 14 G12", ALC285_FIXUP_HP_GPIO_LED),

[PATCH 6.14 003/183] ALSA: usb-audio: Add retry on -EPROTO from usb_set_interface()

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Geoffrey D. Bennett <g@b4.vu>

commit f406005e162b660dc405b4f18bf7bcb93a515608 upstream.

During initialisation of Focusrite USB audio interfaces, -EPROTO is
sometimes returned from usb_set_interface(), which sometimes prevents
the device from working: subsequent usb_set_interface() and
uac_clock_source_is_valid() calls fail.

This patch adds up to 5 retries in endpoint_set_interface(), with a
delay starting at 5ms and doubling each time. 5 retries was chosen to
allow for longer than expected waits for the interface to start
responding correctly; in testing, a single 5ms delay was sufficient to
fix the issue.

Closes: https://github.com/geoffreybennett/fcp-support/issues/2
Cc: stable@vger.kernel.org
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://patch.msgid.link/Z//7s9dKsmVxHzY2@m.b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/usb/endpoint.c |    7 +++++++
 1 file changed, 7 insertions(+)

--- a/sound/usb/endpoint.c
+++ b/sound/usb/endpoint.c
@@ -926,6 +926,8 @@ static int endpoint_set_interface(struct
 {
 	int altset = set ? ep->altsetting : 0;
 	int err;
+	int retries = 0;
+	const int max_retries = 5;
 
 	if (ep->iface_ref->altset == altset)
 		return 0;
@@ -935,8 +937,13 @@ static int endpoint_set_interface(struct
 
 	usb_audio_dbg(chip, "Setting usb interface %d:%d for EP 0x%x\n",
 		      ep->iface, altset, ep->ep_num);
+retry:
 	err = usb_set_interface(chip->dev, ep->iface, altset);
 	if (err < 0) {
+		if (err == -EPROTO && ++retries <= max_retries) {
+			msleep(5 * (1 << (retries - 1)));
+			goto retry;
+		}
 		usb_audio_err_ratelimited(
 			chip, "%d:%d: usb_set_interface failed (%d)\n",
 			ep->iface, altset, err);

[PATCH 6.14 004/183] ALSA: usb-audio: Add second USB ID for Jabra Evolve 65 headset

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Joachim Priesner <joachim.priesner@web.de>

commit 1149719442d28c96dc63cad432b5a6db7c300e1a upstream.

There seem to be multiple USB device IDs used for these;
the one I have reports as 0b0e:030c when powered on.
(When powered off, it reports as 0b0e:0311.)

Signed-off-by: Joachim Priesner <joachim.priesner@web.de>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20250428053606.9237-1-joachim.priesner@web.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/usb/format.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/sound/usb/format.c
+++ b/sound/usb/format.c
@@ -260,7 +260,8 @@ static int parse_audio_format_rates_v1(s
 	}
 
 	/* Jabra Evolve 65 headset */
-	if (chip->usb_id == USB_ID(0x0b0e, 0x030b)) {
+	if (chip->usb_id == USB_ID(0x0b0e, 0x030b) ||
+	    chip->usb_id == USB_ID(0x0b0e, 0x030c)) {
 		/* only 48kHz for playback while keeping 16kHz for capture */
 		if (fp->nr_rates != 1)
 			return set_fixed_rate(fp, 48000, SNDRV_PCM_RATE_48000);

[PATCH 6.14 005/183] ASoC: renesas: rz-ssi: Use NOIRQ_SYSTEM_SLEEP_PM_OPS()

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>

commit c1b0f5183a4488b6b7790f834ce3a786725b3583 upstream.

In the latest kernel versions system crashes were noticed occasionally
during suspend/resume. This occurs because the RZ SSI suspend trigger
(called from snd_soc_suspend()) is executed after rz_ssi_pm_ops->suspend()
and it accesses IP registers. After the rz_ssi_pm_ops->suspend() is
executed the IP clocks are disabled and its reset line is asserted.

Since snd_soc_suspend() is invoked through snd_soc_pm_ops->suspend(),
snd_soc_pm_ops is associated with soc_driver (defined in
sound/soc/soc-core.c), and there is no parent-child relationship between
soc_driver and rz_ssi_driver the power management subsystem does not
enforce a specific suspend/resume order between the RZ SSI platform driver
and soc_driver.

To ensure that the suspend/resume function of rz-ssi is executed after
snd_soc_suspend(), use NOIRQ_SYSTEM_SLEEP_PM_OPS().

Fixes: 1fc778f7c833 ("ASoC: renesas: rz-ssi: Add suspend to RAM support")
Cc: stable@vger.kernel.org
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://patch.msgid.link/20250410141525.4126502-1-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/soc/renesas/rz-ssi.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/sound/soc/renesas/rz-ssi.c
+++ b/sound/soc/renesas/rz-ssi.c
@@ -1244,7 +1244,7 @@ static int rz_ssi_runtime_resume(struct
 
 static const struct dev_pm_ops rz_ssi_pm_ops = {
 	RUNTIME_PM_OPS(rz_ssi_runtime_suspend, rz_ssi_runtime_resume, NULL)
-	SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend, pm_runtime_force_resume)
+	NOIRQ_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend, pm_runtime_force_resume)
 };
 
 static struct platform_driver rz_ssi_driver = {

[PATCH 6.14 006/183] btrfs: adjust subpage bit start based on sectorsize

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Josef Bacik <josef@toxicpanda.com>

commit e08e49d986f82c30f42ad0ed43ebbede1e1e3739 upstream.

When running machines with 64k page size and a 16k nodesize we started
seeing tree log corruption in production.  This turned out to be because
we were not writing out dirty blocks sometimes, so this in fact affects
all metadata writes.

When writing out a subpage EB we scan the subpage bitmap for a dirty
range.  If the range isn't dirty we do

	bit_start++;

to move onto the next bit.  The problem is the bitmap is based on the
number of sectors that an EB has.  So in this case, we have a 64k
pagesize, 16k nodesize, but a 4k sectorsize.  This means our bitmap is 4
bits for every node.  With a 64k page size we end up with 4 nodes per
page.

To make this easier this is how everything looks

[0         16k       32k       48k     ] logical address
[0         4         8         12      ] radix tree offset
[               64k page               ] folio
[ 16k eb ][ 16k eb ][ 16k eb ][ 16k eb ] extent buffers
[ | | | |  | | | |   | | | |   | | | | ] bitmap

Now we use all of our addressing based on fs_info->sectorsize_bits, so
as you can see the above our 16k eb->start turns into radix entry 4.

When we find a dirty range for our eb, we correctly do bit_start +=
sectors_per_node, because if we start at bit 0, the next bit for the
next eb is 4, to correspond to eb->start 16k.

However if our range is clean, we will do bit_start++, which will now
put us offset from our radix tree entries.

In our case, assume that the first time we check the bitmap the block is
not dirty, we increment bit_start so now it == 1, and then we loop
around and check again.  This time it is dirty, and we go to find that
start using the following equation

	start = folio_start + bit_start * fs_info->sectorsize;

so in the case above, eb->start 0 is now dirty, and we calculate start
as

	0 + 1 * fs_info->sectorsize = 4096
	4096 >> 12 = 1

Now we're looking up the radix tree for 1, and we won't find an eb.
What's worse is now we're using bit_start == 1, so we do bit_start +=
sectors_per_node, which is now 5.  If that eb is dirty we will run into
the same thing, we will look at an offset that is not populated in the
radix tree, and now we're skipping the writeout of dirty extent buffers.

The best fix for this is to not use sectorsize_bits to address nodes,
but that's a larger change.  Since this is a fs corruption problem fix
it simply by always using sectors_per_node to increment the start bit.

Fixes: c4aec299fa8f ("btrfs: introduce submit_eb_subpage() to submit a subpage metadata page")
CC: stable@vger.kernel.org # 5.15+
Reviewed-by: Boris Burkov <boris@bur.io>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/btrfs/extent_io.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/fs/btrfs/extent_io.c
+++ b/fs/btrfs/extent_io.c
@@ -1871,7 +1871,7 @@ static int submit_eb_subpage(struct foli
 			      subpage->bitmaps)) {
 			spin_unlock_irqrestore(&subpage->lock, flags);
 			spin_unlock(&folio->mapping->i_private_lock);
-			bit_start++;
+			bit_start += sectors_per_node;
 			continue;
 		}
 

[PATCH 6.14 007/183] btrfs: fix COW handling in run_delalloc_nocow()

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dave Chen <davechen@synology.com>

commit be3f1938d3e6ea8186f0de3dd95245dda4f22c1e upstream.

In run_delalloc_nocow(), when the found btrfs_key's offset > cur_offset,
it indicates a gap between the current processing region and
the next file extent. The original code would directly jump to
the "must_cow" label, which increments the slot and forces a fallback
to COW. This behavior might skip an extent item and result in an
overestimated COW fallback range.

This patch modifies the logic so that when a gap is detected:

- If no COW range is already being recorded (cow_start is unset),
  cow_start is set to cur_offset.

- cur_offset is then advanced to the beginning of the next extent.

- Instead of jumping to "must_cow", control flows directly to
  "next_slot" so that the same extent item can be reexamined properly.

The change ensures that we accurately account for the extent gap and
avoid accidentally extending the range that needs to fallback to COW.

CC: stable@vger.kernel.org # 6.6+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Dave Chen <davechen@synology.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/btrfs/inode.c |    9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

--- a/fs/btrfs/inode.c
+++ b/fs/btrfs/inode.c
@@ -2083,12 +2083,13 @@ next_slot:
 
 		/*
 		 * If the found extent starts after requested offset, then
-		 * adjust extent_end to be right before this extent begins
+		 * adjust cur_offset to be right before this extent begins.
 		 */
 		if (found_key.offset > cur_offset) {
-			extent_end = found_key.offset;
-			extent_type = 0;
-			goto must_cow;
+			if (cow_start == (u64)-1)
+				cow_start = cur_offset;
+			cur_offset = found_key.offset;
+			goto next_slot;
 		}
 
 		/*

[PATCH 6.14 008/183] cpufreq: intel_pstate: Unchecked MSR aceess in legacy mode

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>

commit ac4e04d9e378f5aa826c2406ad7871ae1b6a6fb9 upstream.

When turbo mode is unavailable on a Skylake-X system, executing the
command:

 # echo 1 > /sys/devices/system/cpu/intel_pstate/no_turbo

results in an unchecked MSR access error:

 WRMSR to 0x199 (attempted to write 0x0000000100001300).

This issue was reproduced on an OEM (Original Equipment Manufacturer)
system and is not a common problem across all Skylake-X systems.

This error occurs because the MSR 0x199 Turbo Engage Bit (bit 32) is set
when turbo mode is disabled. The issue arises when intel_pstate fails to
detect that turbo mode is disabled. Here intel_pstate relies on
MSR_IA32_MISC_ENABLE bit 38 to determine the status of turbo mode.
However, on this system, bit 38 is not set even when turbo mode is
disabled.

According to the Intel Software Developer's Manual (SDM), the BIOS sets
this bit during platform initialization to enable or disable
opportunistic processor performance operations. Logically, this bit
should be set in such cases. However, the SDM also specifies that "OS
and applications must use CPUID leaf 06H to detect processors with
opportunistic processor performance operations enabled."

Therefore, in addition to checking MSR_IA32_MISC_ENABLE bit 38, verify
that CPUID.06H:EAX[1] is 0 to accurately determine if turbo mode is
disabled.

Fixes: 4521e1a0ce17 ("cpufreq: intel_pstate: Reflect current no_turbo state correctly")
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/cpufreq/intel_pstate.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/cpufreq/intel_pstate.c
+++ b/drivers/cpufreq/intel_pstate.c
@@ -598,6 +598,9 @@ static bool turbo_is_disabled(void)
 {
 	u64 misc_en;
 
+	if (!cpu_feature_enabled(X86_FEATURE_IDA))
+		return true;
+
 	rdmsrl(MSR_IA32_MISC_ENABLE, misc_en);
 
 	return !!(misc_en & MSR_IA32_MISC_ENABLE_TURBO_DISABLE);

[PATCH 6.14 009/183] drm/fdinfo: Protect against driver unbind

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>

commit 5b1834d6202f86180e451ad1a2a8a193a1da18fc upstream.

If we unbind a driver from the PCI device with an active DRM client,
subsequent read of the fdinfo data associated with the file descriptor in
question will not end well.

Protect the path with a drm_dev_enter/exit() pair.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Fixes: 3f09a0cd4ea3 ("drm: Add common fdinfo helper")
Cc: <stable@vger.kernel.org> # v6.5+
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20250418162512.72324-1-tvrtko.ursulin@igalia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpu/drm/drm_file.c |    6 ++++++
 1 file changed, 6 insertions(+)

--- a/drivers/gpu/drm/drm_file.c
+++ b/drivers/gpu/drm/drm_file.c
@@ -964,6 +964,10 @@ void drm_show_fdinfo(struct seq_file *m,
 	struct drm_file *file = f->private_data;
 	struct drm_device *dev = file->minor->dev;
 	struct drm_printer p = drm_seq_file_printer(m);
+	int idx;
+
+	if (!drm_dev_enter(dev, &idx))
+		return;
 
 	drm_printf(&p, "drm-driver:\t%s\n", dev->driver->name);
 	drm_printf(&p, "drm-client-id:\t%llu\n", file->client_id);
@@ -983,6 +987,8 @@ void drm_show_fdinfo(struct seq_file *m,
 
 	if (dev->driver->show_fdinfo)
 		dev->driver->show_fdinfo(&p, file);
+
+	drm_dev_exit(idx);
 }
 EXPORT_SYMBOL(drm_show_fdinfo);
 

[PATCH 6.14 010/183] drm/nouveau: Fix WARN_ON in nouveau_fence_context_kill()

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Philipp Stanner <phasta@kernel.org>

commit bbe5679f30d7690a9b6838a583b9690ea73fe0e9 upstream.

Nouveau is mostly designed in a way that it's expected that fences only
ever get signaled through nouveau_fence_signal(). However, in at least
one other place, nouveau_fence_done(), can signal fences, too. If that
happens (race) a signaled fence remains in the pending list for a while,
until it gets removed by nouveau_fence_update().

Should nouveau_fence_context_kill() run in the meantime, this would be
a bug because the function would attempt to set an error code on an
already signaled fence.

Have nouveau_fence_context_kill() check for a fence being signaled.

Cc: stable@vger.kernel.org # v5.10+
Fixes: ea13e5abf807 ("drm/nouveau: signal pending fences when channel has been killed")
Suggested-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://lore.kernel.org/r/20250415121900.55719-3-phasta@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpu/drm/nouveau/nouveau_fence.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/gpu/drm/nouveau/nouveau_fence.c
+++ b/drivers/gpu/drm/nouveau/nouveau_fence.c
@@ -90,7 +90,7 @@ nouveau_fence_context_kill(struct nouvea
 	while (!list_empty(&fctx->pending)) {
 		fence = list_entry(fctx->pending.next, typeof(*fence), head);
 
-		if (error)
+		if (error && !dma_fence_is_signaled_locked(&fence->base))
 			dma_fence_set_error(&fence->base, error);
 
 		if (nouveau_fence_signal(fence))

[PATCH 6.14 011/183] EDAC/altera: Test the correct error reg offset

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Niravkumar L Rabara <niravkumar.l.rabara@altera.com>

commit 4fb7b8fceb0beebbe00712c3daf49ade0386076a upstream.

Test correct structure member, ecc_cecnt_offset, before using it.

  [ bp: Massage commit message. ]

Fixes: 73bcc942f427 ("EDAC, altera: Add Arria10 EDAC support")
Signed-off-by: Niravkumar L Rabara <niravkumar.l.rabara@altera.com>
Signed-off-by: Matthew Gerlach <matthew.gerlach@altera.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Dinh Nguyen <dinguyen@kernel.org>
Cc: stable@kernel.org
Link: https://lore.kernel.org/20250425142640.33125-2-matthew.gerlach@altera.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/edac/altera_edac.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/edac/altera_edac.c
+++ b/drivers/edac/altera_edac.c
@@ -99,7 +99,7 @@ static irqreturn_t altr_sdram_mc_err_han
 	if (status & priv->ecc_stat_ce_mask) {
 		regmap_read(drvdata->mc_vbase, priv->ecc_saddr_offset,
 			    &err_addr);
-		if (priv->ecc_uecnt_offset)
+		if (priv->ecc_cecnt_offset)
 			regmap_read(drvdata->mc_vbase,  priv->ecc_cecnt_offset,
 				    &err_count);
 		edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, err_count,

[PATCH 6.14 012/183] EDAC/altera: Set DDR and SDMMC interrupt mask before registration

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Niravkumar L Rabara <niravkumar.l.rabara@altera.com>

commit 6dbe3c5418c4368e824bff6ae4889257dd544892 upstream.

Mask DDR and SDMMC in probe function to avoid spurious interrupts before
registration.  Removed invalid register write to system manager.

Fixes: 1166fde93d5b ("EDAC, altera: Add Arria10 ECC memory init functions")
Signed-off-by: Niravkumar L Rabara <niravkumar.l.rabara@altera.com>
Signed-off-by: Matthew Gerlach <matthew.gerlach@altera.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Dinh Nguyen <dinguyen@kernel.org>
Cc: stable@kernel.org
Link: https://lore.kernel.org/20250425142640.33125-3-matthew.gerlach@altera.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/edac/altera_edac.c |    7 ++++---
 drivers/edac/altera_edac.h |    2 ++
 2 files changed, 6 insertions(+), 3 deletions(-)

--- a/drivers/edac/altera_edac.c
+++ b/drivers/edac/altera_edac.c
@@ -1005,9 +1005,6 @@ altr_init_a10_ecc_block(struct device_no
 		}
 	}
 
-	/* Interrupt mode set to every SBERR */
-	regmap_write(ecc_mgr_map, ALTR_A10_ECC_INTMODE_OFST,
-		     ALTR_A10_ECC_INTMODE);
 	/* Enable ECC */
 	ecc_set_bits(ecc_ctrl_en_mask, (ecc_block_base +
 					ALTR_A10_ECC_CTRL_OFST));
@@ -2127,6 +2124,10 @@ static int altr_edac_a10_probe(struct pl
 		return PTR_ERR(edac->ecc_mgr_map);
 	}
 
+	/* Set irq mask for DDR SBE to avoid any pending irq before registration */
+	regmap_write(edac->ecc_mgr_map, A10_SYSMGR_ECC_INTMASK_SET_OFST,
+		     (A10_SYSMGR_ECC_INTMASK_SDMMCB | A10_SYSMGR_ECC_INTMASK_DDR0));
+
 	edac->irq_chip.name = pdev->dev.of_node->name;
 	edac->irq_chip.irq_mask = a10_eccmgr_irq_mask;
 	edac->irq_chip.irq_unmask = a10_eccmgr_irq_unmask;
--- a/drivers/edac/altera_edac.h
+++ b/drivers/edac/altera_edac.h
@@ -249,6 +249,8 @@ struct altr_sdram_mc_data {
 #define A10_SYSMGR_ECC_INTMASK_SET_OFST   0x94
 #define A10_SYSMGR_ECC_INTMASK_CLR_OFST   0x98
 #define A10_SYSMGR_ECC_INTMASK_OCRAM      BIT(1)
+#define A10_SYSMGR_ECC_INTMASK_SDMMCB     BIT(16)
+#define A10_SYSMGR_ECC_INTMASK_DDR0       BIT(17)
 
 #define A10_SYSMGR_ECC_INTSTAT_SERR_OFST  0x9C
 #define A10_SYSMGR_ECC_INTSTAT_DERR_OFST  0xA0

[PATCH 6.14 013/183] i2c: imx-lpi2c: Fix clock count when probe defers

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Clark Wang <xiaoning.wang@nxp.com>

commit b1852c5de2f2a37dd4462f7837c9e3e678f9e546 upstream.

Deferred probe with pm_runtime_put() may delay clock disable, causing
incorrect clock usage count. Use pm_runtime_put_sync() to ensure the
clock is disabled immediately.

Fixes: 13d6eb20fc79 ("i2c: imx-lpi2c: add runtime pm support")
Signed-off-by: Clark Wang <xiaoning.wang@nxp.com>
Signed-off-by: Carlos Song <carlos.song@nxp.com>
Cc: <stable@vger.kernel.org> # v4.16+
Link: https://lore.kernel.org/r/20250421062341.2471922-1-carlos.song@nxp.com
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/i2c/busses/i2c-imx-lpi2c.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/i2c/busses/i2c-imx-lpi2c.c
+++ b/drivers/i2c/busses/i2c-imx-lpi2c.c
@@ -1380,9 +1380,9 @@ static int lpi2c_imx_probe(struct platfo
 	return 0;
 
 rpm_disable:
-	pm_runtime_put(&pdev->dev);
-	pm_runtime_disable(&pdev->dev);
 	pm_runtime_dont_use_autosuspend(&pdev->dev);
+	pm_runtime_put_sync(&pdev->dev);
+	pm_runtime_disable(&pdev->dev);
 
 	return ret;
 }

[PATCH 6.14 014/183] arm64: errata: Add missing sentinels to Spectre-BHB MIDR arrays

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Will Deacon <will@kernel.org>

commit fee4d171451c1ad9e8aaf65fc0ab7d143a33bd72 upstream.

Commit a5951389e58d ("arm64: errata: Add newer ARM cores to the
spectre_bhb_loop_affected() lists") added some additional CPUs to the
Spectre-BHB workaround, including some new arrays for designs that
require new 'k' values for the workaround to be effective.

Unfortunately, the new arrays omitted the sentinel entry and so
is_midr_in_range_list() will walk off the end when it doesn't find a
match. With UBSAN enabled, this leads to a crash during boot when
is_midr_in_range_list() is inlined (which was more common prior to
c8c2647e69be ("arm64: Make  _midr_in_range_list() an exported
function")):

 |  Internal error: aarch64 BRK: 00000000f2000001 [#1] PREEMPT SMP
 |  pstate: 804000c5 (Nzcv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
 |  pc : spectre_bhb_loop_affected+0x28/0x30
 |  lr : is_spectre_bhb_affected+0x170/0x190
 | [...]
 |  Call trace:
 |   spectre_bhb_loop_affected+0x28/0x30
 |   update_cpu_capabilities+0xc0/0x184
 |   init_cpu_features+0x188/0x1a4
 |   cpuinfo_store_boot_cpu+0x4c/0x60
 |   smp_prepare_boot_cpu+0x38/0x54
 |   start_kernel+0x8c/0x478
 |   __primary_switched+0xc8/0xd4
 |  Code: 6b09011f 54000061 52801080 d65f03c0 (d4200020)
 |  ---[ end trace 0000000000000000 ]---
 |  Kernel panic - not syncing: aarch64 BRK: Fatal exception

Add the missing sentinel entries.

Cc: Lee Jones <lee@kernel.org>
Cc: James Morse <james.morse@arm.com>
Cc: Doug Anderson <dianders@chromium.org>
Cc: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Cc: <stable@vger.kernel.org>
Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes: a5951389e58d ("arm64: errata: Add newer ARM cores to the spectre_bhb_loop_affected() lists")
Signed-off-by: Will Deacon <will@kernel.org>
Reviewed-by: Lee Jones <lee@kernel.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250501104747.28431-1-will@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/arm64/kernel/proton-pack.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/arch/arm64/kernel/proton-pack.c
+++ b/arch/arm64/kernel/proton-pack.c
@@ -879,10 +879,12 @@ static u8 spectre_bhb_loop_affected(void
 	static const struct midr_range spectre_bhb_k132_list[] = {
 		MIDR_ALL_VERSIONS(MIDR_CORTEX_X3),
 		MIDR_ALL_VERSIONS(MIDR_NEOVERSE_V2),
+		{},
 	};
 	static const struct midr_range spectre_bhb_k38_list[] = {
 		MIDR_ALL_VERSIONS(MIDR_CORTEX_A715),
 		MIDR_ALL_VERSIONS(MIDR_CORTEX_A720),
+		{},
 	};
 	static const struct midr_range spectre_bhb_k32_list[] = {
 		MIDR_ALL_VERSIONS(MIDR_CORTEX_A78),

[PATCH 6.14 015/183] parisc: Fix double SIGFPE crash

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Helge Deller <deller@gmx.de>

commit de3629baf5a33af1919dec7136d643b0662e85ef upstream.

Camm noticed that on parisc a SIGFPE exception will crash an application with
a second SIGFPE in the signal handler.  Dave analyzed it, and it happens
because glibc uses a double-word floating-point store to atomically update
function descriptors. As a result of lazy binding, we hit a floating-point
store in fpe_func almost immediately.

When the T bit is set, an assist exception trap occurs when when the
co-processor encounters *any* floating-point instruction except for a double
store of register %fr0.  The latter cancels all pending traps.  Let's fix this
by clearing the Trap (T) bit in the FP status register before returning to the
signal handler in userspace.

The issue can be reproduced with this test program:

root@parisc:~# cat fpe.c

static void fpe_func(int sig, siginfo_t *i, void *v) {
        sigset_t set;
        sigemptyset(&set);
        sigaddset(&set, SIGFPE);
        sigprocmask(SIG_UNBLOCK, &set, NULL);
        printf("GOT signal %d with si_code %ld\n", sig, i->si_code);
}

int main() {
        struct sigaction action = {
                .sa_sigaction = fpe_func,
                .sa_flags = SA_RESTART|SA_SIGINFO };
        sigaction(SIGFPE, &action, 0);
        feenableexcept(FE_OVERFLOW);
        return printf("%lf\n",1.7976931348623158E308*1.7976931348623158E308);
}

root@parisc:~# gcc fpe.c -lm
root@parisc:~# ./a.out
 Floating point exception

root@parisc:~# strace -f ./a.out
 execve("./a.out", ["./a.out"], 0xf9ac7034 /* 20 vars */) = 0
 getrlimit(RLIMIT_STACK, {rlim_cur=8192*1024, rlim_max=RLIM_INFINITY}) = 0
 ...
 rt_sigaction(SIGFPE, {sa_handler=0x1110a, sa_mask=[], sa_flags=SA_RESTART|SA_SIGINFO}, NULL, 8) = 0
 --- SIGFPE {si_signo=SIGFPE, si_code=FPE_FLTOVF, si_addr=0x1078f} ---
 --- SIGFPE {si_signo=SIGFPE, si_code=FPE_FLTOVF, si_addr=0xf8f21237} ---
 +++ killed by SIGFPE +++
 Floating point exception

Signed-off-by: Helge Deller <deller@gmx.de>
Suggested-by: John David Anglin <dave.anglin@bell.net>
Reported-by: Camm Maguire <camm@maguirefamily.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/parisc/math-emu/driver.c |   16 +++++++++++++---
 1 file changed, 13 insertions(+), 3 deletions(-)

--- a/arch/parisc/math-emu/driver.c
+++ b/arch/parisc/math-emu/driver.c
@@ -97,9 +97,19 @@ handle_fpe(struct pt_regs *regs)
 
 	memcpy(regs->fr, frcopy, sizeof regs->fr);
 	if (signalcode != 0) {
-	    force_sig_fault(signalcode >> 24, signalcode & 0xffffff,
-			    (void __user *) regs->iaoq[0]);
-	    return -1;
+		int sig = signalcode >> 24;
+
+		if (sig == SIGFPE) {
+			/*
+			 * Clear floating point trap bit to avoid trapping
+			 * again on the first floating-point instruction in
+			 * the userspace signal handler.
+			 */
+			regs->fr[0] &= ~(1ULL << 38);
+		}
+		force_sig_fault(sig, signalcode & 0xffffff,
+				(void __user *) regs->iaoq[0]);
+		return -1;
 	}
 
 	return signalcode ? -1 : 0;

[PATCH 6.14 016/183] pinctrl: airoha: fix wrong PHY LED mapping and PHY2 LED defines

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Christian Marangi <ansuelsmth@gmail.com>

commit 457d9772e8a5cdae64f66b5f7d5b0247365191ec upstream.

The current PHY2 LED define are wrong and actually set BITs outside the
related mask. Fix it and set the correct value. While at it, also use
FIELD_PREP_CONST macro to make it simple to understand what values are
actually applied for the mask.

Also fix wrong PHY LED mapping. The SoC Switch supports up to 4 port but
the register define mapping for 5 PHY port, starting from 0. The mapping
was wrongly defined starting from PHY1. Reorder the function group to
start from PHY0. PHY4 is actually never supported as we don't have a
GPIO pin to assign.

Cc: stable@vger.kernel.org
Fixes: 1c8ace2d0725 ("pinctrl: airoha: Add support for EN7581 SoC")
Reviewed-by: Benjamin Larsson <benjamin.larsson@genexis.eu>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/20250401135026.18018-1-ansuelsmth@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/pinctrl/mediatek/pinctrl-airoha.c |  159 +++++++++++++-----------------
 1 file changed, 70 insertions(+), 89 deletions(-)

--- a/drivers/pinctrl/mediatek/pinctrl-airoha.c
+++ b/drivers/pinctrl/mediatek/pinctrl-airoha.c
@@ -6,6 +6,7 @@
  */
 
 #include <dt-bindings/pinctrl/mt65xx.h>
+#include <linux/bitfield.h>
 #include <linux/bits.h>
 #include <linux/cleanup.h>
 #include <linux/gpio/driver.h>
@@ -112,39 +113,19 @@
 #define REG_LAN_LED1_MAPPING			0x0280
 
 #define LAN4_LED_MAPPING_MASK			GENMASK(18, 16)
-#define LAN4_PHY4_LED_MAP			BIT(18)
-#define LAN4_PHY2_LED_MAP			BIT(17)
-#define LAN4_PHY1_LED_MAP			BIT(16)
-#define LAN4_PHY0_LED_MAP			0
-#define LAN4_PHY3_LED_MAP			GENMASK(17, 16)
+#define LAN4_PHY_LED_MAP(_n)			FIELD_PREP_CONST(LAN4_LED_MAPPING_MASK, (_n))
 
 #define LAN3_LED_MAPPING_MASK			GENMASK(14, 12)
-#define LAN3_PHY4_LED_MAP			BIT(14)
-#define LAN3_PHY2_LED_MAP			BIT(13)
-#define LAN3_PHY1_LED_MAP			BIT(12)
-#define LAN3_PHY0_LED_MAP			0
-#define LAN3_PHY3_LED_MAP			GENMASK(13, 12)
+#define LAN3_PHY_LED_MAP(_n)			FIELD_PREP_CONST(LAN3_LED_MAPPING_MASK, (_n))
 
 #define LAN2_LED_MAPPING_MASK			GENMASK(10, 8)
-#define LAN2_PHY4_LED_MAP			BIT(12)
-#define LAN2_PHY2_LED_MAP			BIT(11)
-#define LAN2_PHY1_LED_MAP			BIT(10)
-#define LAN2_PHY0_LED_MAP			0
-#define LAN2_PHY3_LED_MAP			GENMASK(11, 10)
+#define LAN2_PHY_LED_MAP(_n)			FIELD_PREP_CONST(LAN2_LED_MAPPING_MASK, (_n))
 
 #define LAN1_LED_MAPPING_MASK			GENMASK(6, 4)
-#define LAN1_PHY4_LED_MAP			BIT(6)
-#define LAN1_PHY2_LED_MAP			BIT(5)
-#define LAN1_PHY1_LED_MAP			BIT(4)
-#define LAN1_PHY0_LED_MAP			0
-#define LAN1_PHY3_LED_MAP			GENMASK(5, 4)
+#define LAN1_PHY_LED_MAP(_n)			FIELD_PREP_CONST(LAN1_LED_MAPPING_MASK, (_n))
 
 #define LAN0_LED_MAPPING_MASK			GENMASK(2, 0)
-#define LAN0_PHY4_LED_MAP			BIT(3)
-#define LAN0_PHY2_LED_MAP			BIT(2)
-#define LAN0_PHY1_LED_MAP			BIT(1)
-#define LAN0_PHY0_LED_MAP			0
-#define LAN0_PHY3_LED_MAP			GENMASK(2, 1)
+#define LAN0_PHY_LED_MAP(_n)			FIELD_PREP_CONST(LAN0_LED_MAPPING_MASK, (_n))
 
 /* CONF */
 #define REG_I2C_SDA_E2				0x001c
@@ -1476,8 +1457,8 @@ static const struct airoha_pinctrl_func_
 		.regmap[1] = {
 			AIROHA_FUNC_MUX,
 			REG_LAN_LED0_MAPPING,
-			LAN1_LED_MAPPING_MASK,
-			LAN1_PHY1_LED_MAP
+			LAN0_LED_MAPPING_MASK,
+			LAN0_PHY_LED_MAP(0)
 		},
 		.regmap_size = 2,
 	}, {
@@ -1491,8 +1472,8 @@ static const struct airoha_pinctrl_func_
 		.regmap[1] = {
 			AIROHA_FUNC_MUX,
 			REG_LAN_LED0_MAPPING,
-			LAN2_LED_MAPPING_MASK,
-			LAN2_PHY1_LED_MAP
+			LAN1_LED_MAPPING_MASK,
+			LAN1_PHY_LED_MAP(0)
 		},
 		.regmap_size = 2,
 	}, {
@@ -1506,8 +1487,8 @@ static const struct airoha_pinctrl_func_
 		.regmap[1] = {
 			AIROHA_FUNC_MUX,
 			REG_LAN_LED0_MAPPING,
-			LAN3_LED_MAPPING_MASK,
-			LAN3_PHY1_LED_MAP
+			LAN2_LED_MAPPING_MASK,
+			LAN2_PHY_LED_MAP(0)
 		},
 		.regmap_size = 2,
 	}, {
@@ -1521,8 +1502,8 @@ static const struct airoha_pinctrl_func_
 		.regmap[1] = {
 			AIROHA_FUNC_MUX,
 			REG_LAN_LED0_MAPPING,
-			LAN4_LED_MAPPING_MASK,
-			LAN4_PHY1_LED_MAP
+			LAN3_LED_MAPPING_MASK,
+			LAN3_PHY_LED_MAP(0)
 		},
 		.regmap_size = 2,
 	},
@@ -1540,8 +1521,8 @@ static const struct airoha_pinctrl_func_
 		.regmap[1] = {
 			AIROHA_FUNC_MUX,
 			REG_LAN_LED0_MAPPING,
-			LAN1_LED_MAPPING_MASK,
-			LAN1_PHY2_LED_MAP
+			LAN0_LED_MAPPING_MASK,
+			LAN0_PHY_LED_MAP(1)
 		},
 		.regmap_size = 2,
 	}, {
@@ -1555,8 +1536,8 @@ static const struct airoha_pinctrl_func_
 		.regmap[1] = {
 			AIROHA_FUNC_MUX,
 			REG_LAN_LED0_MAPPING,
-			LAN2_LED_MAPPING_MASK,
-			LAN2_PHY2_LED_MAP
+			LAN1_LED_MAPPING_MASK,
+			LAN1_PHY_LED_MAP(1)
 		},
 		.regmap_size = 2,
 	}, {
@@ -1570,8 +1551,8 @@ static const struct airoha_pinctrl_func_
 		.regmap[1] = {
 			AIROHA_FUNC_MUX,
 			REG_LAN_LED0_MAPPING,
-			LAN3_LED_MAPPING_MASK,
-			LAN3_PHY2_LED_MAP
+			LAN2_LED_MAPPING_MASK,
+			LAN2_PHY_LED_MAP(1)
 		},
 		.regmap_size = 2,
 	}, {
@@ -1585,8 +1566,8 @@ static const struct airoha_pinctrl_func_
 		.regmap[1] = {
 			AIROHA_FUNC_MUX,
 			REG_LAN_LED0_MAPPING,
-			LAN4_LED_MAPPING_MASK,
-			LAN4_PHY2_LED_MAP
+			LAN3_LED_MAPPING_MASK,
+			LAN3_PHY_LED_MAP(1)
 		},
 		.regmap_size = 2,
 	},
@@ -1604,8 +1585,8 @@ static const struct airoha_pinctrl_func_
 		.regmap[1] = {
 			AIROHA_FUNC_MUX,
 			REG_LAN_LED0_MAPPING,
-			LAN1_LED_MAPPING_MASK,
-			LAN1_PHY3_LED_MAP
+			LAN0_LED_MAPPING_MASK,
+			LAN0_PHY_LED_MAP(2)
 		},
 		.regmap_size = 2,
 	}, {
@@ -1619,8 +1600,8 @@ static const struct airoha_pinctrl_func_
 		.regmap[1] = {
 			AIROHA_FUNC_MUX,
 			REG_LAN_LED0_MAPPING,
-			LAN2_LED_MAPPING_MASK,
-			LAN2_PHY3_LED_MAP
+			LAN1_LED_MAPPING_MASK,
+			LAN1_PHY_LED_MAP(2)
 		},
 		.regmap_size = 2,
 	}, {
@@ -1634,8 +1615,8 @@ static const struct airoha_pinctrl_func_
 		.regmap[1] = {
 			AIROHA_FUNC_MUX,
 			REG_LAN_LED0_MAPPING,
-			LAN3_LED_MAPPING_MASK,
-			LAN3_PHY3_LED_MAP
+			LAN2_LED_MAPPING_MASK,
+			LAN2_PHY_LED_MAP(2)
 		},
 		.regmap_size = 2,
 	}, {
@@ -1649,8 +1630,8 @@ static const struct airoha_pinctrl_func_
 		.regmap[1] = {
 			AIROHA_FUNC_MUX,
 			REG_LAN_LED0_MAPPING,
-			LAN4_LED_MAPPING_MASK,
-			LAN4_PHY3_LED_MAP
+			LAN3_LED_MAPPING_MASK,
+			LAN3_PHY_LED_MAP(2)
 		},
 		.regmap_size = 2,
 	},
@@ -1668,8 +1649,8 @@ static const struct airoha_pinctrl_func_
 		.regmap[1] = {
 			AIROHA_FUNC_MUX,
 			REG_LAN_LED0_MAPPING,
-			LAN1_LED_MAPPING_MASK,
-			LAN1_PHY4_LED_MAP
+			LAN0_LED_MAPPING_MASK,
+			LAN0_PHY_LED_MAP(3)
 		},
 		.regmap_size = 2,
 	}, {
@@ -1683,8 +1664,8 @@ static const struct airoha_pinctrl_func_
 		.regmap[1] = {
 			AIROHA_FUNC_MUX,
 			REG_LAN_LED0_MAPPING,
-			LAN2_LED_MAPPING_MASK,
-			LAN2_PHY4_LED_MAP
+			LAN1_LED_MAPPING_MASK,
+			LAN1_PHY_LED_MAP(3)
 		},
 		.regmap_size = 2,
 	}, {
@@ -1698,8 +1679,8 @@ static const struct airoha_pinctrl_func_
 		.regmap[1] = {
 			AIROHA_FUNC_MUX,
 			REG_LAN_LED0_MAPPING,
-			LAN3_LED_MAPPING_MASK,
-			LAN3_PHY4_LED_MAP
+			LAN2_LED_MAPPING_MASK,
+			LAN2_PHY_LED_MAP(3)
 		},
 		.regmap_size = 2,
 	}, {
@@ -1713,8 +1694,8 @@ static const struct airoha_pinctrl_func_
 		.regmap[1] = {
 			AIROHA_FUNC_MUX,
 			REG_LAN_LED0_MAPPING,
-			LAN4_LED_MAPPING_MASK,
-			LAN4_PHY4_LED_MAP
+			LAN3_LED_MAPPING_MASK,
+			LAN3_PHY_LED_MAP(3)
 		},
 		.regmap_size = 2,
 	},
@@ -1732,8 +1713,8 @@ static const struct airoha_pinctrl_func_
 		.regmap[1] = {
 			AIROHA_FUNC_MUX,
 			REG_LAN_LED1_MAPPING,
-			LAN1_LED_MAPPING_MASK,
-			LAN1_PHY1_LED_MAP
+			LAN0_LED_MAPPING_MASK,
+			LAN0_PHY_LED_MAP(0)
 		},
 		.regmap_size = 2,
 	}, {
@@ -1747,8 +1728,8 @@ static const struct airoha_pinctrl_func_
 		.regmap[1] = {
 			AIROHA_FUNC_MUX,
 			REG_LAN_LED1_MAPPING,
-			LAN2_LED_MAPPING_MASK,
-			LAN2_PHY1_LED_MAP
+			LAN1_LED_MAPPING_MASK,
+			LAN1_PHY_LED_MAP(0)
 		},
 		.regmap_size = 2,
 	}, {
@@ -1762,8 +1743,8 @@ static const struct airoha_pinctrl_func_
 		.regmap[1] = {
 			AIROHA_FUNC_MUX,
 			REG_LAN_LED1_MAPPING,
-			LAN3_LED_MAPPING_MASK,
-			LAN3_PHY1_LED_MAP
+			LAN2_LED_MAPPING_MASK,
+			LAN2_PHY_LED_MAP(0)
 		},
 		.regmap_size = 2,
 	}, {
@@ -1777,8 +1758,8 @@ static const struct airoha_pinctrl_func_
 		.regmap[1] = {
 			AIROHA_FUNC_MUX,
 			REG_LAN_LED1_MAPPING,
-			LAN4_LED_MAPPING_MASK,
-			LAN4_PHY1_LED_MAP
+			LAN3_LED_MAPPING_MASK,
+			LAN3_PHY_LED_MAP(0)
 		},
 		.regmap_size = 2,
 	},
@@ -1796,8 +1777,8 @@ static const struct airoha_pinctrl_func_
 		.regmap[1] = {
 			AIROHA_FUNC_MUX,
 			REG_LAN_LED1_MAPPING,
-			LAN1_LED_MAPPING_MASK,
-			LAN1_PHY2_LED_MAP
+			LAN0_LED_MAPPING_MASK,
+			LAN0_PHY_LED_MAP(1)
 		},
 		.regmap_size = 2,
 	}, {
@@ -1811,8 +1792,8 @@ static const struct airoha_pinctrl_func_
 		.regmap[1] = {
 			AIROHA_FUNC_MUX,
 			REG_LAN_LED1_MAPPING,
-			LAN2_LED_MAPPING_MASK,
-			LAN2_PHY2_LED_MAP
+			LAN1_LED_MAPPING_MASK,
+			LAN1_PHY_LED_MAP(1)
 		},
 		.regmap_size = 2,
 	}, {
@@ -1826,8 +1807,8 @@ static const struct airoha_pinctrl_func_
 		.regmap[1] = {
 			AIROHA_FUNC_MUX,
 			REG_LAN_LED1_MAPPING,
-			LAN3_LED_MAPPING_MASK,
-			LAN3_PHY2_LED_MAP
+			LAN2_LED_MAPPING_MASK,
+			LAN2_PHY_LED_MAP(1)
 		},
 		.regmap_size = 2,
 	}, {
@@ -1841,8 +1822,8 @@ static const struct airoha_pinctrl_func_
 		.regmap[1] = {
 			AIROHA_FUNC_MUX,
 			REG_LAN_LED1_MAPPING,
-			LAN4_LED_MAPPING_MASK,
-			LAN4_PHY2_LED_MAP
+			LAN3_LED_MAPPING_MASK,
+			LAN3_PHY_LED_MAP(1)
 		},
 		.regmap_size = 2,
 	},
@@ -1860,8 +1841,8 @@ static const struct airoha_pinctrl_func_
 		.regmap[1] = {
 			AIROHA_FUNC_MUX,
 			REG_LAN_LED1_MAPPING,
-			LAN1_LED_MAPPING_MASK,
-			LAN1_PHY3_LED_MAP
+			LAN0_LED_MAPPING_MASK,
+			LAN0_PHY_LED_MAP(2)
 		},
 		.regmap_size = 2,
 	}, {
@@ -1875,8 +1856,8 @@ static const struct airoha_pinctrl_func_
 		.regmap[1] = {
 			AIROHA_FUNC_MUX,
 			REG_LAN_LED1_MAPPING,
-			LAN2_LED_MAPPING_MASK,
-			LAN2_PHY3_LED_MAP
+			LAN1_LED_MAPPING_MASK,
+			LAN1_PHY_LED_MAP(2)
 		},
 		.regmap_size = 2,
 	}, {
@@ -1890,8 +1871,8 @@ static const struct airoha_pinctrl_func_
 		.regmap[1] = {
 			AIROHA_FUNC_MUX,
 			REG_LAN_LED1_MAPPING,
-			LAN3_LED_MAPPING_MASK,
-			LAN3_PHY3_LED_MAP
+			LAN2_LED_MAPPING_MASK,
+			LAN2_PHY_LED_MAP(2)
 		},
 		.regmap_size = 2,
 	}, {
@@ -1905,8 +1886,8 @@ static const struct airoha_pinctrl_func_
 		.regmap[1] = {
 			AIROHA_FUNC_MUX,
 			REG_LAN_LED1_MAPPING,
-			LAN4_LED_MAPPING_MASK,
-			LAN4_PHY3_LED_MAP
+			LAN3_LED_MAPPING_MASK,
+			LAN3_PHY_LED_MAP(2)
 		},
 		.regmap_size = 2,
 	},
@@ -1924,8 +1905,8 @@ static const struct airoha_pinctrl_func_
 		.regmap[1] = {
 			AIROHA_FUNC_MUX,
 			REG_LAN_LED1_MAPPING,
-			LAN1_LED_MAPPING_MASK,
-			LAN1_PHY4_LED_MAP
+			LAN0_LED_MAPPING_MASK,
+			LAN0_PHY_LED_MAP(3)
 		},
 		.regmap_size = 2,
 	}, {
@@ -1939,8 +1920,8 @@ static const struct airoha_pinctrl_func_
 		.regmap[1] = {
 			AIROHA_FUNC_MUX,
 			REG_LAN_LED1_MAPPING,
-			LAN2_LED_MAPPING_MASK,
-			LAN2_PHY4_LED_MAP
+			LAN1_LED_MAPPING_MASK,
+			LAN1_PHY_LED_MAP(3)
 		},
 		.regmap_size = 2,
 	}, {
@@ -1954,8 +1935,8 @@ static const struct airoha_pinctrl_func_
 		.regmap[1] = {
 			AIROHA_FUNC_MUX,
 			REG_LAN_LED1_MAPPING,
-			LAN3_LED_MAPPING_MASK,
-			LAN3_PHY4_LED_MAP
+			LAN2_LED_MAPPING_MASK,
+			LAN2_PHY_LED_MAP(3)
 		},
 		.regmap_size = 2,
 	}, {
@@ -1969,8 +1950,8 @@ static const struct airoha_pinctrl_func_
 		.regmap[1] = {
 			AIROHA_FUNC_MUX,
 			REG_LAN_LED1_MAPPING,
-			LAN4_LED_MAPPING_MASK,
-			LAN4_PHY4_LED_MAP
+			LAN3_LED_MAPPING_MASK,
+			LAN3_PHY_LED_MAP(3)
 		},
 		.regmap_size = 2,
 	},

[PATCH 6.14 017/183] perf/x86/intel: Only check the group flag for X86 leader

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Kan Liang <kan.liang@linux.intel.com>

commit 75aea4b0656ead0facd13d2aae4cb77326e53d2f upstream.

A warning in intel_pmu_lbr_counters_reorder() may be triggered by below
perf command.

perf record -e "{cpu-clock,cycles/call-graph="lbr"/}" -- sleep 1

It's because the group is mistakenly treated as a branch counter group.

The hw.flags of the leader are used to determine whether a group is a
branch counters group. However, the hw.flags is only available for a
hardware event. The field to store the flags is a union type. For a
software event, it's a hrtimer. The corresponding bit may be set if the
leader is a software event.

For a branch counter group and other groups that have a group flag
(e.g., topdown, PEBS counters snapshotting, and ACR), the leader must
be a X86 event. Check the X86 event before checking the flag.
The patch only fixes the issue for the branch counter group.
The following patch will fix the other groups.

There may be an alternative way to fix the issue by moving the hw.flags
out of the union type. It should work for now. But it's still possible
that the flags will be used by other types of events later. As long as
that type of event is used as a leader, a similar issue will be
triggered. So the alternative way is dropped.

Fixes: 33744916196b ("perf/x86/intel: Support branch counters logging")
Closes: https://lore.kernel.org/lkml/20250412091423.1839809-1-luogengkun@huaweicloud.com/
Reported-by: Luo Gengkun <luogengkun@huaweicloud.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20250424134718.311934-2-kan.liang@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/x86/events/core.c       |    2 +-
 arch/x86/events/perf_event.h |    9 ++++++++-
 2 files changed, 9 insertions(+), 2 deletions(-)

--- a/arch/x86/events/core.c
+++ b/arch/x86/events/core.c
@@ -753,7 +753,7 @@ void x86_pmu_enable_all(int added)
 	}
 }
 
-static inline int is_x86_event(struct perf_event *event)
+int is_x86_event(struct perf_event *event)
 {
 	int i;
 
--- a/arch/x86/events/perf_event.h
+++ b/arch/x86/events/perf_event.h
@@ -110,9 +110,16 @@ static inline bool is_topdown_event(stru
 	return is_metric_event(event) || is_slots_event(event);
 }
 
+int is_x86_event(struct perf_event *event);
+
+static inline bool check_leader_group(struct perf_event *leader, int flags)
+{
+	return is_x86_event(leader) ? !!(leader->hw.flags & flags) : false;
+}
+
 static inline bool is_branch_counters_group(struct perf_event *event)
 {
-	return event->group_leader->hw.flags & PERF_X86_EVENT_BRANCH_COUNTERS;
+	return check_leader_group(event->group_leader, PERF_X86_EVENT_BRANCH_COUNTERS);
 }
 
 struct amd_nb {

[PATCH 6.14 018/183] perf/x86/intel: KVM: Mask PEBS_ENABLE loaded for guest with vCPUs value.

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sean Christopherson <seanjc@google.com>

commit 58f6217e5d0132a9f14e401e62796916aa055c1b upstream.

When generating the MSR_IA32_PEBS_ENABLE value that will be loaded on
VM-Entry to a KVM guest, mask the value with the vCPU's desired PEBS_ENABLE
value.  Consulting only the host kernel's host vs. guest masks results in
running the guest with PEBS enabled even when the guest doesn't want to use
PEBS.  Because KVM uses perf events to proxy the guest virtual PMU, simply
looking at exclude_host can't differentiate between events created by host
userspace, and events created by KVM on behalf of the guest.

Running the guest with PEBS unexpectedly enabled typically manifests as
crashes due to a near-infinite stream of #PFs.  E.g. if the guest hasn't
written MSR_IA32_DS_AREA, the CPU will hit page faults on address '0' when
trying to record PEBS events.

The issue is most easily reproduced by running `perf kvm top` from before
commit 7b100989b4f6 ("perf evlist: Remove __evlist__add_default") (after
which, `perf kvm top` effectively stopped using PEBS).	The userspace side
of perf creates a guest-only PEBS event, which intel_guest_get_msrs()
misconstrues a guest-*owned* PEBS event.

Arguably, this is a userspace bug, as enabling PEBS on guest-only events
simply cannot work, and userspace can kill VMs in many other ways (there
is no danger to the host).  However, even if this is considered to be bad
userspace behavior, there's zero downside to perf/KVM restricting PEBS to
guest-owned events.

Note, commit 854250329c02 ("KVM: x86/pmu: Disable guest PEBS temporarily
in two rare situations") fixed the case where host userspace is profiling
KVM *and* userspace, but missed the case where userspace is profiling only
KVM.

Fixes: c59a1f106f5c ("KVM: x86/pmu: Add IA32_PEBS_ENABLE MSR emulation for extended PEBS")
Closes: https://lore.kernel.org/all/Z_VUswFkWiTYI0eD@do-x1carbon
Reported-by: Seth Forshee <sforshee@kernel.org>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Tested-by: "Seth Forshee (DigitalOcean)" <sforshee@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250426001355.1026530-1-seanjc@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/x86/events/intel/core.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/x86/events/intel/core.c
+++ b/arch/x86/events/intel/core.c
@@ -4341,7 +4341,7 @@ static struct perf_guest_switch_msr *int
 	arr[pebs_enable] = (struct perf_guest_switch_msr){
 		.msr = MSR_IA32_PEBS_ENABLE,
 		.host = cpuc->pebs_enabled & ~cpuc->intel_ctrl_guest_mask,
-		.guest = pebs_mask & ~cpuc->intel_ctrl_host_mask,
+		.guest = pebs_mask & ~cpuc->intel_ctrl_host_mask & kvm_pmu->pebs_enable,
 	};
 
 	if (arr[pebs_enable].host) {

[PATCH 6.14 019/183] amd-xgbe: Fix to ensure dependent features are toggled with RX checksum offload

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Vishal Badole <Vishal.Badole@amd.com>

commit f04dd30f1bef1ed2e74a4050af6e5e5e3869bac3 upstream.

According to the XGMAC specification, enabling features such as Layer 3
and Layer 4 Packet Filtering, Split Header and Virtualized Network support
automatically selects the IPC Full Checksum Offload Engine on the receive
side.

When RX checksum offload is disabled, these dependent features must also
be disabled to prevent abnormal behavior caused by mismatched feature
dependencies.

Ensure that toggling RX checksum offload (disabling or enabling) properly
disables or enables all dependent features, maintaining consistent and
expected behavior in the network device.

Cc: stable@vger.kernel.org
Fixes: 1a510ccf5869 ("amd-xgbe: Add support for VXLAN offload capabilities")
Signed-off-by: Vishal Badole <Vishal.Badole@amd.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250424130248.428865-1-Vishal.Badole@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/amd/xgbe/xgbe-desc.c |    9 +++++++--
 drivers/net/ethernet/amd/xgbe/xgbe-dev.c  |   24 ++++++++++++++++++++++--
 drivers/net/ethernet/amd/xgbe/xgbe-drv.c  |   11 +++++++++--
 drivers/net/ethernet/amd/xgbe/xgbe.h      |    4 ++++
 4 files changed, 42 insertions(+), 6 deletions(-)

--- a/drivers/net/ethernet/amd/xgbe/xgbe-desc.c
+++ b/drivers/net/ethernet/amd/xgbe/xgbe-desc.c
@@ -373,8 +373,13 @@ static int xgbe_map_rx_buffer(struct xgb
 	}
 
 	/* Set up the header page info */
-	xgbe_set_buffer_data(&rdata->rx.hdr, &ring->rx_hdr_pa,
-			     XGBE_SKB_ALLOC_SIZE);
+	if (pdata->netdev->features & NETIF_F_RXCSUM) {
+		xgbe_set_buffer_data(&rdata->rx.hdr, &ring->rx_hdr_pa,
+				     XGBE_SKB_ALLOC_SIZE);
+	} else {
+		xgbe_set_buffer_data(&rdata->rx.hdr, &ring->rx_hdr_pa,
+				     pdata->rx_buf_size);
+	}
 
 	/* Set up the buffer page info */
 	xgbe_set_buffer_data(&rdata->rx.buf, &ring->rx_buf_pa,
--- a/drivers/net/ethernet/amd/xgbe/xgbe-dev.c
+++ b/drivers/net/ethernet/amd/xgbe/xgbe-dev.c
@@ -320,6 +320,18 @@ static void xgbe_config_sph_mode(struct
 	XGMAC_IOWRITE_BITS(pdata, MAC_RCR, HDSMS, XGBE_SPH_HDSMS_SIZE);
 }
 
+static void xgbe_disable_sph_mode(struct xgbe_prv_data *pdata)
+{
+	unsigned int i;
+
+	for (i = 0; i < pdata->channel_count; i++) {
+		if (!pdata->channel[i]->rx_ring)
+			break;
+
+		XGMAC_DMA_IOWRITE_BITS(pdata->channel[i], DMA_CH_CR, SPH, 0);
+	}
+}
+
 static int xgbe_write_rss_reg(struct xgbe_prv_data *pdata, unsigned int type,
 			      unsigned int index, unsigned int val)
 {
@@ -3545,8 +3557,12 @@ static int xgbe_init(struct xgbe_prv_dat
 	xgbe_config_tx_coalesce(pdata);
 	xgbe_config_rx_buffer_size(pdata);
 	xgbe_config_tso_mode(pdata);
-	xgbe_config_sph_mode(pdata);
-	xgbe_config_rss(pdata);
+
+	if (pdata->netdev->features & NETIF_F_RXCSUM) {
+		xgbe_config_sph_mode(pdata);
+		xgbe_config_rss(pdata);
+	}
+
 	desc_if->wrapper_tx_desc_init(pdata);
 	desc_if->wrapper_rx_desc_init(pdata);
 	xgbe_enable_dma_interrupts(pdata);
@@ -3702,5 +3718,9 @@ void xgbe_init_function_ptrs_dev(struct
 	hw_if->disable_vxlan = xgbe_disable_vxlan;
 	hw_if->set_vxlan_id = xgbe_set_vxlan_id;
 
+	/* For Split Header*/
+	hw_if->enable_sph = xgbe_config_sph_mode;
+	hw_if->disable_sph = xgbe_disable_sph_mode;
+
 	DBGPR("<--xgbe_init_function_ptrs\n");
 }
--- a/drivers/net/ethernet/amd/xgbe/xgbe-drv.c
+++ b/drivers/net/ethernet/amd/xgbe/xgbe-drv.c
@@ -2257,10 +2257,17 @@ static int xgbe_set_features(struct net_
 	if (ret)
 		return ret;
 
-	if ((features & NETIF_F_RXCSUM) && !rxcsum)
+	if ((features & NETIF_F_RXCSUM) && !rxcsum) {
+		hw_if->enable_sph(pdata);
+		hw_if->enable_vxlan(pdata);
 		hw_if->enable_rx_csum(pdata);
-	else if (!(features & NETIF_F_RXCSUM) && rxcsum)
+		schedule_work(&pdata->restart_work);
+	} else if (!(features & NETIF_F_RXCSUM) && rxcsum) {
+		hw_if->disable_sph(pdata);
+		hw_if->disable_vxlan(pdata);
 		hw_if->disable_rx_csum(pdata);
+		schedule_work(&pdata->restart_work);
+	}
 
 	if ((features & NETIF_F_HW_VLAN_CTAG_RX) && !rxvlan)
 		hw_if->enable_rx_vlan_stripping(pdata);
--- a/drivers/net/ethernet/amd/xgbe/xgbe.h
+++ b/drivers/net/ethernet/amd/xgbe/xgbe.h
@@ -865,6 +865,10 @@ struct xgbe_hw_if {
 	void (*enable_vxlan)(struct xgbe_prv_data *);
 	void (*disable_vxlan)(struct xgbe_prv_data *);
 	void (*set_vxlan_id)(struct xgbe_prv_data *);
+
+	/* For Split Header */
+	void (*enable_sph)(struct xgbe_prv_data *pdata);
+	void (*disable_sph)(struct xgbe_prv_data *pdata);
 };
 
 /* This structure represents implementation specific routines for an

[PATCH 6.14 020/183] irqchip/qcom-mpm: Prevent crash when trying to handle non-wake GPIOs

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Stephan Gerhold <stephan.gerhold@linaro.org>

commit 38a05c0b87833f5b188ae43b428b1f792df2b384 upstream.

On Qualcomm chipsets not all GPIOs are wakeup capable. Those GPIOs do not
have a corresponding MPM pin and should not be handled inside the MPM
driver. The IRQ domain hierarchy is always applied, so it's required to
explicitly disconnect the hierarchy for those. The pinctrl-msm driver marks
these with GPIO_NO_WAKE_IRQ. qcom-pdc has a check for this, but
irq-qcom-mpm is currently missing the check. This is causing crashes when
setting up interrupts for non-wake GPIOs:

 root@rb1:~# gpiomon -c gpiochip1 10
   irq: IRQ159: trimming hierarchy from :soc@0:interrupt-controller@f200000-1
   Unable to handle kernel paging request at virtual address ffff8000a1dc3820
   Hardware name: Qualcomm Technologies, Inc. Robotics RB1 (DT)
   pc : mpm_set_type+0x80/0xcc
   lr : mpm_set_type+0x5c/0xcc
   Call trace:
    mpm_set_type+0x80/0xcc (P)
    qcom_mpm_set_type+0x64/0x158
    irq_chip_set_type_parent+0x20/0x38
    msm_gpio_irq_set_type+0x50/0x530
    __irq_set_trigger+0x60/0x184
    __setup_irq+0x304/0x6bc
    request_threaded_irq+0xc8/0x19c
    edge_detector_setup+0x260/0x364
    linereq_create+0x420/0x5a8
    gpio_ioctl+0x2d4/0x6c0

Fix this by copying the check for GPIO_NO_WAKE_IRQ from qcom-pdc.c, so that
MPM is removed entirely from the hierarchy for non-wake GPIOs.

Fixes: a6199bb514d8 ("irqchip: Add Qualcomm MPM controller driver")
Reported-by: Alexey Klimov <alexey.klimov@linaro.org>
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Alexey Klimov <alexey.klimov@linaro.org>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20250502-irq-qcom-mpm-fix-no-wake-v1-1-8a1eafcd28d4@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/irqchip/irq-qcom-mpm.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/irqchip/irq-qcom-mpm.c
+++ b/drivers/irqchip/irq-qcom-mpm.c
@@ -227,6 +227,9 @@ static int qcom_mpm_alloc(struct irq_dom
 	if (ret)
 		return ret;
 
+	if (pin == GPIO_NO_WAKE_IRQ)
+		return irq_domain_disconnect_hierarchy(domain, virq);
+
 	ret = irq_domain_set_hwirq_and_chip(domain, virq, pin,
 					    &qcom_mpm_chip, priv);
 	if (ret)

[PATCH 6.14 021/183] mm/memblock: pass size instead of end to memblock_set_node()

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Wei Yang <richard.weiyang@gmail.com>

commit 06eaa824fd239edd1eab2754f29b2d03da313003 upstream.

The second parameter of memblock_set_node() is size instead of end.

Since it iterates from lower address to higher address, finally the node
id is correct. But during the process, some of them are wrong.

Pass size instead of end.

Fixes: 61167ad5fecd ("mm: pass nid to reserve_bootmem_region()")
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
CC: Mike Rapoport <rppt@kernel.org>
CC: Yajun Deng <yajun.deng@linux.dev>
CC: stable@vger.kernel.org
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/20250318071948.23854-2-richard.weiyang@gmail.com
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 mm/memblock.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/mm/memblock.c
+++ b/mm/memblock.c
@@ -2193,7 +2193,7 @@ static void __init memmap_init_reserved_
 		if (memblock_is_nomap(region))
 			reserve_bootmem_region(start, end, nid);
 
-		memblock_set_node(start, end, &memblock.reserved, nid);
+		memblock_set_node(start, region->size, &memblock.reserved, nid);
 	}
 
 	/*

[PATCH 6.14 022/183] mm/memblock: repeat setting reserved region nid if array is doubled

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Wei Yang <richard.weiyang@gmail.com>

commit eac8ea8736ccc09513152d970eb2a42ed78e87e8 upstream.

Commit 61167ad5fecd ("mm: pass nid to reserve_bootmem_region()") introduce
a way to set nid to all reserved region.

But there is a corner case it will leave some region with invalid nid.
When memblock_set_node() doubles the array of memblock.reserved, it may
lead to a new reserved region before current position. The new region
will be left with an invalid node id.

Repeat the process when detecting it.

Fixes: 61167ad5fecd ("mm: pass nid to reserve_bootmem_region()")
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
CC: Mike Rapoport <rppt@kernel.org>
CC: Yajun Deng <yajun.deng@linux.dev>
CC: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250318071948.23854-3-richard.weiyang@gmail.com
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 mm/memblock.c |   10 ++++++++++
 1 file changed, 10 insertions(+)

--- a/mm/memblock.c
+++ b/mm/memblock.c
@@ -2180,11 +2180,14 @@ static void __init memmap_init_reserved_
 	struct memblock_region *region;
 	phys_addr_t start, end;
 	int nid;
+	unsigned long max_reserved;
 
 	/*
 	 * set nid on all reserved pages and also treat struct
 	 * pages for the NOMAP regions as PageReserved
 	 */
+repeat:
+	max_reserved = memblock.reserved.max;
 	for_each_mem_region(region) {
 		nid = memblock_get_region_node(region);
 		start = region->base;
@@ -2195,6 +2198,13 @@ static void __init memmap_init_reserved_
 
 		memblock_set_node(start, region->size, &memblock.reserved, nid);
 	}
+	/*
+	 * 'max' is changed means memblock.reserved has been doubled its
+	 * array, which may result a new reserved region before current
+	 * 'start'. Now we should repeat the procedure to set its node id.
+	 */
+	if (max_reserved != memblock.reserved.max)
+		goto repeat;
 
 	/*
 	 * initialize struct pages for reserved regions that don't have

[PATCH 6.14 023/183] mmc: renesas_sdhi: Fix error handling in renesas_sdhi_probe

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ruslan Piasetskyi <ruslan.piasetskyi@gmail.com>

commit 649b50a82f09fa44c2f7a65618e4584072145ab7 upstream.

After moving tmio_mmc_host_probe down, error handling has to be
adjusted.

Fixes: 74f45de394d9 ("mmc: renesas_sdhi: register irqs before registering controller")
Reviewed-by: Ihar Salauyou <salauyou.ihar@gmail.com>
Signed-off-by: Ruslan Piasetskyi <ruslan.piasetskyi@gmail.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250326220638.460083-1-ruslan.piasetskyi@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/mmc/host/renesas_sdhi_core.c |   10 ++++------
 1 file changed, 4 insertions(+), 6 deletions(-)

--- a/drivers/mmc/host/renesas_sdhi_core.c
+++ b/drivers/mmc/host/renesas_sdhi_core.c
@@ -1112,26 +1112,26 @@ int renesas_sdhi_probe(struct platform_d
 	num_irqs = platform_irq_count(pdev);
 	if (num_irqs < 0) {
 		ret = num_irqs;
-		goto eirq;
+		goto edisclk;
 	}
 
 	/* There must be at least one IRQ source */
 	if (!num_irqs) {
 		ret = -ENXIO;
-		goto eirq;
+		goto edisclk;
 	}
 
 	for (i = 0; i < num_irqs; i++) {
 		irq = platform_get_irq(pdev, i);
 		if (irq < 0) {
 			ret = irq;
-			goto eirq;
+			goto edisclk;
 		}
 
 		ret = devm_request_irq(&pdev->dev, irq, tmio_mmc_irq, 0,
 				       dev_name(&pdev->dev), host);
 		if (ret)
-			goto eirq;
+			goto edisclk;
 	}
 
 	ret = tmio_mmc_host_probe(host);
@@ -1143,8 +1143,6 @@ int renesas_sdhi_probe(struct platform_d
 
 	return ret;
 
-eirq:
-	tmio_mmc_host_remove(host);
 edisclk:
 	renesas_sdhi_clk_disable(host);
 efree:

[PATCH 6.14 024/183] spi: tegra114: Dont fail set_cs_timing when delays are zero

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Aaron Kling <webgeek1234@gmail.com>

commit 4426e6b4ecf632bb75d973051e1179b8bfac2320 upstream.

The original code would skip null delay pointers, but when the pointers
were converted to point within the spi_device struct, the check was not
updated to skip delays of zero. Hence all spi devices that didn't set
delays would fail to probe.

Fixes: 04e6bb0d6bb1 ("spi: modify set_cs_timing parameter")
Cc: stable@vger.kernel.org
Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
Link: https://patch.msgid.link/20250423-spi-tegra114-v1-1-2d608bcc12f9@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/spi/spi-tegra114.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

--- a/drivers/spi/spi-tegra114.c
+++ b/drivers/spi/spi-tegra114.c
@@ -728,9 +728,9 @@ static int tegra_spi_set_hw_cs_timing(st
 	u32 inactive_cycles;
 	u8 cs_state;
 
-	if (setup->unit != SPI_DELAY_UNIT_SCK ||
-	    hold->unit != SPI_DELAY_UNIT_SCK ||
-	    inactive->unit != SPI_DELAY_UNIT_SCK) {
+	if ((setup->unit && setup->unit != SPI_DELAY_UNIT_SCK) ||
+	    (hold->unit && hold->unit != SPI_DELAY_UNIT_SCK) ||
+	    (inactive->unit && inactive->unit != SPI_DELAY_UNIT_SCK)) {
 		dev_err(&spi->dev,
 			"Invalid delay unit %d, should be SPI_DELAY_UNIT_SCK\n",
 			SPI_DELAY_UNIT_SCK);

[PATCH 6.14 025/183] tracing: Do not take trace_event_sem in print_event_fields()

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Steven Rostedt <rostedt@goodmis.org>

commit 0a8f11f8569e7ed16cbcedeb28c4350f6378fea6 upstream.

On some paths in print_event_fields() it takes the trace_event_sem for
read, even though it should always be held when the function is called.

Remove the taking of that mutex and add a lockdep_assert_held_read() to
make sure the trace_event_sem is held when print_event_fields() is called.

Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250501224128.0b1f0571@batman.local.home
Fixes: 80a76994b2d88 ("tracing: Add "fields" option to show raw trace event fields")
Reported-by: syzbot+441582c1592938fccf09@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/6813ff5e.050a0220.14dd7d.001b.GAE@google.com/
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 kernel/trace/trace_output.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/kernel/trace/trace_output.c
+++ b/kernel/trace/trace_output.c
@@ -961,11 +961,12 @@ enum print_line_t print_event_fields(str
 	struct trace_event_call *call;
 	struct list_head *head;
 
+	lockdep_assert_held_read(&trace_event_sem);
+
 	/* ftrace defined events have separate call structures */
 	if (event->type <= __TRACE_LAST_TYPE) {
 		bool found = false;
 
-		down_read(&trace_event_sem);
 		list_for_each_entry(call, &ftrace_events, list) {
 			if (call->event.type == event->type) {
 				found = true;
@@ -975,7 +976,6 @@ enum print_line_t print_event_fields(str
 			if (call->event.type > __TRACE_LAST_TYPE)
 				break;
 		}
-		up_read(&trace_event_sem);
 		if (!found) {
 			trace_seq_printf(&iter->seq, "UNKNOWN TYPE %d\n", event->type);
 			goto out;

[PATCH 6.14 026/183] wifi: brcm80211: fmac: Add error handling for brcmf_usb_dl_writeimage()

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Wentao Liang <vulab@iscas.ac.cn>

commit 8e089e7b585d95122c8122d732d1d5ef8f879396 upstream.

The function brcmf_usb_dl_writeimage() calls the function
brcmf_usb_dl_cmd() but dose not check its return value. The
'state.state' and the 'state.bytes' are uninitialized if the
function brcmf_usb_dl_cmd() fails. It is dangerous to use
uninitialized variables in the conditions.

Add error handling for brcmf_usb_dl_cmd() to jump to error
handling path if the brcmf_usb_dl_cmd() fails and the
'state.state' and the 'state.bytes' are uninitialized.

Improve the error message to report more detailed error
information.

Fixes: 71bb244ba2fd ("brcm80211: fmac: add USB support for bcm43235/6/8 chipsets")
Cc: stable@vger.kernel.org # v3.4+
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Link: https://patch.msgid.link/20250422042203.2259-1-vulab@iscas.ac.cn
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c
@@ -896,14 +896,16 @@ brcmf_usb_dl_writeimage(struct brcmf_usb
 	}
 
 	/* 1) Prepare USB boot loader for runtime image */
-	brcmf_usb_dl_cmd(devinfo, DL_START, &state, sizeof(state));
+	err = brcmf_usb_dl_cmd(devinfo, DL_START, &state, sizeof(state));
+	if (err)
+		goto fail;
 
 	rdlstate = le32_to_cpu(state.state);
 	rdlbytes = le32_to_cpu(state.bytes);
 
 	/* 2) Check we are in the Waiting state */
 	if (rdlstate != DL_WAITING) {
-		brcmf_err("Failed to DL_START\n");
+		brcmf_err("Invalid DL state: %u\n", rdlstate);
 		err = -EINVAL;
 		goto fail;
 	}

[PATCH 6.14 027/183] x86/boot/sev: Support memory acceptance in the EFI stub under SVSM

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ard Biesheuvel <ardb@kernel.org>

commit 8ed12ab1319b2d8e4a529504777aacacf71371e4 upstream.

Commit:

  d54d610243a4 ("x86/boot/sev: Avoid shared GHCB page for early memory acceptance")

provided a fix for SEV-SNP memory acceptance from the EFI stub when
running at VMPL #0. However, that fix was insufficient for SVSM SEV-SNP
guests running at VMPL >0, as those rely on a SVSM calling area, which
is a shared buffer whose address is programmed into a SEV-SNP MSR, and
the SEV init code that sets up this calling area executes much later
during the boot.

Given that booting via the EFI stub at VMPL >0 implies that the firmware
has configured this calling area already, reuse it for performing memory
acceptance in the EFI stub.

Fixes: fcd042e86422 ("x86/sev: Perform PVALIDATE using the SVSM when not at VMPL0")
Tested-by: Tom Lendacky <thomas.lendacky@amd.com>
Co-developed-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: <stable@vger.kernel.org>
Cc: Dionna Amalie Glaze <dionnaglaze@google.com>
Cc: Kevin Loughlin <kevinloughlin@google.com>
Cc: linux-efi@vger.kernel.org
Link: https://lore.kernel.org/r/20250428174322.2780170-2-ardb+git@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/x86/boot/compressed/mem.c |    5 +----
 arch/x86/boot/compressed/sev.c |   40 ++++++++++++++++++++++++++++++++++++++++
 arch/x86/boot/compressed/sev.h |    2 ++
 3 files changed, 43 insertions(+), 4 deletions(-)

--- a/arch/x86/boot/compressed/mem.c
+++ b/arch/x86/boot/compressed/mem.c
@@ -34,14 +34,11 @@ static bool early_is_tdx_guest(void)
 
 void arch_accept_memory(phys_addr_t start, phys_addr_t end)
 {
-	static bool sevsnp;
-
 	/* Platform-specific memory-acceptance call goes here */
 	if (early_is_tdx_guest()) {
 		if (!tdx_accept_memory(start, end))
 			panic("TDX: Failed to accept memory\n");
-	} else if (sevsnp || (sev_get_status() & MSR_AMD64_SEV_SNP_ENABLED)) {
-		sevsnp = true;
+	} else if (early_is_sevsnp_guest()) {
 		snp_accept_memory(start, end);
 	} else {
 		error("Cannot accept memory: unknown platform\n");
--- a/arch/x86/boot/compressed/sev.c
+++ b/arch/x86/boot/compressed/sev.c
@@ -645,3 +645,43 @@ void sev_prep_identity_maps(unsigned lon
 
 	sev_verify_cbit(top_level_pgt);
 }
+
+bool early_is_sevsnp_guest(void)
+{
+	static bool sevsnp;
+
+	if (sevsnp)
+		return true;
+
+	if (!(sev_get_status() & MSR_AMD64_SEV_SNP_ENABLED))
+		return false;
+
+	sevsnp = true;
+
+	if (!snp_vmpl) {
+		unsigned int eax, ebx, ecx, edx;
+
+		/*
+		 * CPUID Fn8000_001F_EAX[28] - SVSM support
+		 */
+		eax = 0x8000001f;
+		ecx = 0;
+		native_cpuid(&eax, &ebx, &ecx, &edx);
+		if (eax & BIT(28)) {
+			struct msr m;
+
+			/* Obtain the address of the calling area to use */
+			boot_rdmsr(MSR_SVSM_CAA, &m);
+			boot_svsm_caa = (void *)m.q;
+			boot_svsm_caa_pa = m.q;
+
+			/*
+			 * The real VMPL level cannot be discovered, but the
+			 * memory acceptance routines make no use of that so
+			 * any non-zero value suffices here.
+			 */
+			snp_vmpl = U8_MAX;
+		}
+	}
+	return true;
+}
--- a/arch/x86/boot/compressed/sev.h
+++ b/arch/x86/boot/compressed/sev.h
@@ -13,12 +13,14 @@
 bool sev_snp_enabled(void);
 void snp_accept_memory(phys_addr_t start, phys_addr_t end);
 u64 sev_get_status(void);
+bool early_is_sevsnp_guest(void);
 
 #else
 
 static inline bool sev_snp_enabled(void) { return false; }
 static inline void snp_accept_memory(phys_addr_t start, phys_addr_t end) { }
 static inline u64 sev_get_status(void) { return 0; }
+static inline bool early_is_sevsnp_guest(void) { return false; }
 
 #endif
 

[PATCH 6.14 028/183] dm-bufio: dont schedule in atomic context

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: LongPing Wei <weilongping@oppo.com>

commit a3d8f0a7f5e8b193db509c7191fefeed3533fc44 upstream.

A BUG was reported as below when CONFIG_DEBUG_ATOMIC_SLEEP and
try_verify_in_tasklet are enabled.
[  129.444685][  T934] BUG: sleeping function called from invalid context at drivers/md/dm-bufio.c:2421
[  129.444723][  T934] in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 934, name: kworker/1:4
[  129.444740][  T934] preempt_count: 201, expected: 0
[  129.444756][  T934] RCU nest depth: 0, expected: 0
[  129.444781][  T934] Preemption disabled at:
[  129.444789][  T934] [<ffffffd816231900>] shrink_work+0x21c/0x248
[  129.445167][  T934] kernel BUG at kernel/sched/walt/walt_debug.c:16!
[  129.445183][  T934] Internal error: Oops - BUG: 00000000f2000800 [#1] PREEMPT SMP
[  129.445204][  T934] Skip md ftrace buffer dump for: 0x1609e0
[  129.447348][  T934] CPU: 1 PID: 934 Comm: kworker/1:4 Tainted: G        W  OE      6.6.56-android15-8-o-g6f82312b30b9-debug #1 1400000003000000474e5500b3187743670464e8
[  129.447362][  T934] Hardware name: Qualcomm Technologies, Inc. Parrot QRD, Alpha-M (DT)
[  129.447373][  T934] Workqueue: dm_bufio_cache shrink_work
[  129.447394][  T934] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[  129.447406][  T934] pc : android_rvh_schedule_bug+0x0/0x8 [sched_walt_debug]
[  129.447435][  T934] lr : __traceiter_android_rvh_schedule_bug+0x44/0x6c
[  129.447451][  T934] sp : ffffffc0843dbc90
[  129.447459][  T934] x29: ffffffc0843dbc90 x28: ffffffffffffffff x27: 0000000000000c8b
[  129.447479][  T934] x26: 0000000000000040 x25: ffffff804b3d6260 x24: ffffffd816232b68
[  129.447497][  T934] x23: ffffff805171c5b4 x22: 0000000000000000 x21: ffffffd816231900
[  129.447517][  T934] x20: ffffff80306ba898 x19: 0000000000000000 x18: ffffffc084159030
[  129.447535][  T934] x17: 00000000d2b5dd1f x16: 00000000d2b5dd1f x15: ffffffd816720358
[  129.447554][  T934] x14: 0000000000000004 x13: ffffff89ef978000 x12: 0000000000000003
[  129.447572][  T934] x11: ffffffd817a823c4 x10: 0000000000000202 x9 : 7e779c5735de9400
[  129.447591][  T934] x8 : ffffffd81560d004 x7 : 205b5d3938373434 x6 : ffffffd8167397c8
[  129.447610][  T934] x5 : 0000000000000000 x4 : 0000000000000001 x3 : ffffffc0843db9e0
[  129.447629][  T934] x2 : 0000000000002f15 x1 : 0000000000000000 x0 : 0000000000000000
[  129.447647][  T934] Call trace:
[  129.447655][  T934]  android_rvh_schedule_bug+0x0/0x8 [sched_walt_debug 1400000003000000474e550080cce8a8a78606b6]
[  129.447681][  T934]  __might_resched+0x190/0x1a8
[  129.447694][  T934]  shrink_work+0x180/0x248
[  129.447706][  T934]  process_one_work+0x260/0x624
[  129.447718][  T934]  worker_thread+0x28c/0x454
[  129.447729][  T934]  kthread+0x118/0x158
[  129.447742][  T934]  ret_from_fork+0x10/0x20
[  129.447761][  T934] Code: ???????? ???????? ???????? d2b5dd1f (d4210000)
[  129.447772][  T934] ---[ end trace 0000000000000000 ]---

dm_bufio_lock will call spin_lock_bh when try_verify_in_tasklet
is enabled, and __scan will be called in atomic context.

Fixes: 7cd326747f46 ("dm bufio: remove dm_bufio_cond_resched()")
Signed-off-by: LongPing Wei <weilongping@oppo.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/md/dm-bufio.c |    9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

--- a/drivers/md/dm-bufio.c
+++ b/drivers/md/dm-bufio.c
@@ -68,6 +68,8 @@
 #define LIST_DIRTY	1
 #define LIST_SIZE	2
 
+#define SCAN_RESCHED_CYCLE	16
+
 /*--------------------------------------------------------------*/
 
 /*
@@ -2426,7 +2428,12 @@ static void __scan(struct dm_bufio_clien
 
 			atomic_long_dec(&c->need_shrink);
 			freed++;
-			cond_resched();
+
+			if (unlikely(freed % SCAN_RESCHED_CYCLE == 0)) {
+				dm_bufio_unlock(c);
+				cond_resched();
+				dm_bufio_lock(c);
+			}
 		}
 	}
 }

[PATCH 6.14 029/183] dm-integrity: fix a warning on invalid table line

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mikulas Patocka <mpatocka@redhat.com>

commit 0a533c3e4246c29d502a7e0fba0e86d80a906b04 upstream.

If we use the 'B' mode and we have an invalit table line,
cancel_delayed_work_sync would trigger a warning. This commit avoids the
warning.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/md/dm-integrity.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/md/dm-integrity.c
+++ b/drivers/md/dm-integrity.c
@@ -5176,7 +5176,7 @@ static void dm_integrity_dtr(struct dm_t
 	BUG_ON(!RB_EMPTY_ROOT(&ic->in_progress));
 	BUG_ON(!list_empty(&ic->wait_list));
 
-	if (ic->mode == 'B')
+	if (ic->mode == 'B' && ic->bitmap_flush_work.work.func)
 		cancel_delayed_work_sync(&ic->bitmap_flush_work);
 	if (ic->metadata_wq)
 		destroy_workqueue(ic->metadata_wq);

[PATCH 6.14 030/183] dm: always update the array size in realloc_argv on success

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Benjamin Marzinski <bmarzins@redhat.com>

commit 5a2a6c428190f945c5cbf5791f72dbea83e97f66 upstream.

realloc_argv() was only updating the array size if it was called with
old_argv already allocated. The first time it was called to create an
argv array, it would allocate the array but return the array size as
zero. dm_split_args() would think that it couldn't store any arguments
in the array and would call realloc_argv() again, causing it to
reallocate the initial slots (this time using GPF_KERNEL) and finally
return a size. Aside from being wasteful, this could cause deadlocks on
targets that need to process messages without starting new IO. Instead,
realloc_argv should always update the allocated array size on success.

Fixes: a0651926553c ("dm table: don't copy from a NULL pointer in realloc_argv()")
Cc: stable@vger.kernel.org
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/md/dm-table.c |    5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

--- a/drivers/md/dm-table.c
+++ b/drivers/md/dm-table.c
@@ -523,9 +523,10 @@ static char **realloc_argv(unsigned int
 		gfp = GFP_NOIO;
 	}
 	argv = kmalloc_array(new_size, sizeof(*argv), gfp);
-	if (argv && old_argv) {
-		memcpy(argv, old_argv, *size * sizeof(*argv));
+	if (argv) {
 		*size = new_size;
+		if (old_argv)
+			memcpy(argv, old_argv, *size * sizeof(*argv));
 	}
 
 	kfree(old_argv);

[PATCH 6.14 031/183] drm/amdgpu: Fix offset for HDP remap in nbio v7.11

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Lijo Lazar <lijo.lazar@amd.com>

commit 79af0604eb80ca1f86a1f265a0b1f9d4fccbc18f upstream.

APUs in passthrough mode use HDP flush. 0x7F000 offset used for
remapping HDP flush is mapped to VPE space which could get power gated.
Use another unused offset in BIF space.

Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit d8116a32cdbe456c7f511183eb9ab187e3d590fb)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpu/drm/amd/amdgpu/nbio_v7_11.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/gpu/drm/amd/amdgpu/nbio_v7_11.c
+++ b/drivers/gpu/drm/amd/amdgpu/nbio_v7_11.c
@@ -361,7 +361,7 @@ static void nbio_v7_11_get_clockgating_s
 		*flags |= AMD_CG_SUPPORT_BIF_LS;
 }
 
-#define MMIO_REG_HOLE_OFFSET (0x80000 - PAGE_SIZE)
+#define MMIO_REG_HOLE_OFFSET 0x44000
 
 static void nbio_v7_11_set_reg_remap(struct amdgpu_device *adev)
 {

[PATCH 6.14 032/183] drm: Select DRM_KMS_HELPER from DRM_DEBUG_DP_MST_TOPOLOGY_REFS

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Janne Grunau <j@jannau.net>

commit 32dce6b1949a696dc7abddc04de8cbe35c260217 upstream.

Using "depends on" and "select" for the same Kconfig symbol is known to
cause circular dependencies (cmp. "Kconfig recursive dependency
limitations" in Documentation/kbuild/kconfig-language.rst.
DRM drivers are selecting drm helpers so do the same for
DRM_DEBUG_DP_MST_TOPOLOGY_REFS.
Fixes following circular dependency reported on x86 for the downstream
Asahi Linux tree:

error: recursive dependency detected!
  symbol DRM_KMS_HELPER is selected by DRM_GEM_SHMEM_HELPER
  symbol DRM_GEM_SHMEM_HELPER is selected by RUST_DRM_GEM_SHMEM_HELPER
  symbol RUST_DRM_GEM_SHMEM_HELPER is selected by DRM_ASAHI
  symbol DRM_ASAHI depends on RUST
  symbol RUST depends on CALL_PADDING
  symbol CALL_PADDING depends on OBJTOOL
  symbol OBJTOOL is selected by STACK_VALIDATION
  symbol STACK_VALIDATION depends on UNWINDER_FRAME_POINTER
  symbol UNWINDER_FRAME_POINTER is part of choice block at arch/x86/Kconfig.debug:224
  symbol <choice> unknown is visible depending on UNWINDER_GUESS
  symbol UNWINDER_GUESS prompt is visible depending on STACKDEPOT
  symbol STACKDEPOT is selected by DRM_DEBUG_DP_MST_TOPOLOGY_REFS
  symbol DRM_DEBUG_DP_MST_TOPOLOGY_REFS depends on DRM_KMS_HELPER

Fixes: 12a280c72868 ("drm/dp_mst: Add topology ref history tracking for debugging")
Cc: stable@vger.kernel.org
Signed-off-by: Janne Grunau <j@jannau.net>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250304-drm_debug_dp_mst_topo_kconfig-v1-1-e16fd152f258@jannau.net
Signed-off-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpu/drm/Kconfig |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/gpu/drm/Kconfig
+++ b/drivers/gpu/drm/Kconfig
@@ -188,7 +188,7 @@ config DRM_DEBUG_DP_MST_TOPOLOGY_REFS
         bool "Enable refcount backtrace history in the DP MST helpers"
 	depends on STACKTRACE_SUPPORT
         select STACKDEPOT
-        depends on DRM_KMS_HELPER
+        select DRM_KMS_HELPER
         depends on DEBUG_KERNEL
         depends on EXPERT
         help

[PATCH 6.14 033/183] iommu/amd: Fix potential buffer overflow in parse_ivrs_acpihid

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Pavel Paklov <Pavel.Paklov@cyberprotect.ru>

commit 8dee308e4c01dea48fc104d37f92d5b58c50b96c upstream.

There is a string parsing logic error which can lead to an overflow of hid
or uid buffers. Comparing ACPIID_LEN against a total string length doesn't
take into account the lengths of individual hid and uid buffers so the
check is insufficient in some cases. For example if the length of hid
string is 4 and the length of the uid string is 260, the length of str
will be equal to ACPIID_LEN + 1 but uid string will overflow uid buffer
which size is 256.

The same applies to the hid string with length 13 and uid string with
length 250.

Check the length of hid and uid strings separately to prevent
buffer overflow.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Fixes: ca3bf5d47cec ("iommu/amd: Introduces ivrs_acpihid kernel parameter")
Cc: stable@vger.kernel.org
Signed-off-by: Pavel Paklov <Pavel.Paklov@cyberprotect.ru>
Link: https://lore.kernel.org/r/20250325092259.392844-1-Pavel.Paklov@cyberprotect.ru
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/iommu/amd/init.c |    8 ++++++++
 1 file changed, 8 insertions(+)

--- a/drivers/iommu/amd/init.c
+++ b/drivers/iommu/amd/init.c
@@ -3677,6 +3677,14 @@ found:
 	while (*uid == '0' && *(uid + 1))
 		uid++;
 
+	if (strlen(hid) >= ACPIHID_HID_LEN) {
+		pr_err("Invalid command line: hid is too long\n");
+		return 1;
+	} else if (strlen(uid) >= ACPIHID_UID_LEN) {
+		pr_err("Invalid command line: uid is too long\n");
+		return 1;
+	}
+
 	i = early_acpihid_map_size++;
 	memcpy(early_acpihid_map[i].hid, hid, strlen(hid));
 	memcpy(early_acpihid_map[i].uid, uid, strlen(uid));

[PATCH 6.14 034/183] iommu/arm-smmu-v3: Fix iommu_device_probe bug due to duplicated stream ids

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Nicolin Chen <nicolinc@nvidia.com>

commit b00d24997a11c10d3e420614f0873b83ce358a34 upstream.

ASPEED VGA card has two built-in devices:
 0008:06:00.0 PCI bridge: ASPEED Technology, Inc. AST1150 PCI-to-PCI Bridge (rev 06)
 0008:07:00.0 VGA compatible controller: ASPEED Technology, Inc. ASPEED Graphics Family (rev 52)

Its toplogy looks like this:
 +-[0008:00]---00.0-[01-09]--+-00.0-[02-09]--+-00.0-[03]----00.0  Sandisk Corp Device 5017
                             |               +-01.0-[04]--
                             |               +-02.0-[05]----00.0  NVIDIA Corporation Device
                             |               +-03.0-[06-07]----00.0-[07]----00.0  ASPEED Technology, Inc. ASPEED Graphics Family
                             |               +-04.0-[08]----00.0  Renesas Technology Corp. uPD720201 USB 3.0 Host Controller
                             |               \-05.0-[09]----00.0  Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
                             \-00.1  PMC-Sierra Inc. Device 4028

The IORT logic populaties two identical IDs into the fwspec->ids array via
DMA aliasing in iort_pci_iommu_init() called by pci_for_each_dma_alias().

Though the SMMU driver had been able to handle this situation since commit
563b5cbe334e ("iommu/arm-smmu-v3: Cope with duplicated Stream IDs"), that
got broken by the later commit cdf315f907d4 ("iommu/arm-smmu-v3: Maintain
a SID->device structure"), which ended up with allocating separate streams
with the same stuffing.

On a kernel prior to v6.15-rc1, there has been an overlooked warning:
  pci 0008:07:00.0: vgaarb: setting as boot VGA device
  pci 0008:07:00.0: vgaarb: bridge control possible
  pci 0008:07:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
  pcieport 0008:06:00.0: Adding to iommu group 14
  ast 0008:07:00.0: stream 67328 already in tree   <===== WARNING
  ast 0008:07:00.0: enabling device (0002 -> 0003)
  ast 0008:07:00.0: Using default configuration
  ast 0008:07:00.0: AST 2600 detected
  ast 0008:07:00.0: [drm] Using analog VGA
  ast 0008:07:00.0: [drm] dram MCLK=396 Mhz type=1 bus_width=16
  [drm] Initialized ast 0.1.0 for 0008:07:00.0 on minor 0
  ast 0008:07:00.0: [drm] fb0: astdrmfb frame buffer device

With v6.15-rc, since the commit bcb81ac6ae3c ("iommu: Get DT/ACPI parsing
into the proper probe path"), the error returned with the warning is moved
to the SMMU device probe flow:
  arm_smmu_probe_device+0x15c/0x4c0
  __iommu_probe_device+0x150/0x4f8
  probe_iommu_group+0x44/0x80
  bus_for_each_dev+0x7c/0x100
  bus_iommu_probe+0x48/0x1a8
  iommu_device_register+0xb8/0x178
  arm_smmu_device_probe+0x1350/0x1db0
which then fails the entire SMMU driver probe:
  pci 0008:06:00.0: Adding to iommu group 21
  pci 0008:07:00.0: stream 67328 already in tree
  arm-smmu-v3 arm-smmu-v3.9.auto: Failed to register iommu
  arm-smmu-v3 arm-smmu-v3.9.auto: probe with driver arm-smmu-v3 failed with error -22

Since SMMU driver had been already expecting a potential duplicated Stream
ID in arm_smmu_install_ste_for_dev(), change the arm_smmu_insert_master()
routine to ignore a duplicated ID from the fwspec->sids array as well.

Note: this has been failing the iommu_device_probe() since 2021, although a
recent iommu commit in v6.15-rc1 that moves iommu_device_probe() started to
fail the SMMU driver probe. Since nobody has cared about DMA Alias support,
leave that as it was but fix the fundamental iommu_device_probe() breakage.

Fixes: cdf315f907d4 ("iommu/arm-smmu-v3: Maintain a SID->device structure")
Cc: stable@vger.kernel.org
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Link: https://lore.kernel.org/r/20250415185620.504299-1-nicolinc@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c |   19 +++++++++++++++----
 1 file changed, 15 insertions(+), 4 deletions(-)

--- a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c
+++ b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c
@@ -3364,6 +3364,7 @@ static int arm_smmu_insert_master(struct
 	mutex_lock(&smmu->streams_mutex);
 	for (i = 0; i < fwspec->num_ids; i++) {
 		struct arm_smmu_stream *new_stream = &master->streams[i];
+		struct rb_node *existing;
 		u32 sid = fwspec->ids[i];
 
 		new_stream->id = sid;
@@ -3374,10 +3375,20 @@ static int arm_smmu_insert_master(struct
 			break;
 
 		/* Insert into SID tree */
-		if (rb_find_add(&new_stream->node, &smmu->streams,
-				arm_smmu_streams_cmp_node)) {
-			dev_warn(master->dev, "stream %u already in tree\n",
-				 sid);
+		existing = rb_find_add(&new_stream->node, &smmu->streams,
+				       arm_smmu_streams_cmp_node);
+		if (existing) {
+			struct arm_smmu_master *existing_master =
+				rb_entry(existing, struct arm_smmu_stream, node)
+					->master;
+
+			/* Bridged PCI devices may end up with duplicated IDs */
+			if (existing_master == master)
+				continue;
+
+			dev_warn(master->dev,
+				 "stream %u already in tree from dev %s\n", sid,
+				 dev_name(existing_master->dev));
 			ret = -EINVAL;
 			break;
 		}

[PATCH 6.14 035/183] iommu/arm-smmu-v3: Fix pgsize_bit for sva domains

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Balbir Singh <balbirs@nvidia.com>

commit 12f78021973ae422564b234136c702a305932d73 upstream.

UBSan caught a bug with IOMMU SVA domains, where the reported exponent
value in __arm_smmu_tlb_inv_range() was >= 64.
__arm_smmu_tlb_inv_range() uses the domain's pgsize_bitmap to compute
the number of pages to invalidate and the invalidation range. Currently
arm_smmu_sva_domain_alloc() does not setup the iommu domain's
pgsize_bitmap. This leads to __ffs() on the value returning 64 and that
leads to undefined behaviour w.r.t. shift operations

Fix this by initializing the iommu_domain's pgsize_bitmap to PAGE_SIZE.
Effectively the code needs to use the smallest page size for
invalidation

Cc: stable@vger.kernel.org
Fixes: eb6c97647be2 ("iommu/arm-smmu-v3: Avoid constructing invalid range commands")
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Balbir Singh <balbirs@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Cc: Jean-Philippe Brucker <jean-philippe@linaro.org>
Cc: Will Deacon <will@kernel.org>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20250412002354.3071449-1-balbirs@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
---
 drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3-sva.c |    6 ++++++
 1 file changed, 6 insertions(+)

--- a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3-sva.c
+++ b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3-sva.c
@@ -411,6 +411,12 @@ struct iommu_domain *arm_smmu_sva_domain
 		return ERR_CAST(smmu_domain);
 	smmu_domain->domain.type = IOMMU_DOMAIN_SVA;
 	smmu_domain->domain.ops = &arm_smmu_sva_domain_ops;
+
+	/*
+	 * Choose page_size as the leaf page size for invalidation when
+	 * ARM_SMMU_FEAT_RANGE_INV is present
+	 */
+	smmu_domain->domain.pgsize_bitmap = PAGE_SIZE;
 	smmu_domain->smmu = smmu;
 
 	ret = xa_alloc(&arm_smmu_asid_xa, &asid, smmu_domain,

[PATCH 6.14 036/183] iommu/vt-d: Apply quirk_iommu_igfx for 8086:0044 (QM57/QS57)

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mingcong Bai <jeffbai@aosc.io>

commit 2c8a7c66c90832432496616a9a3c07293f1364f3 upstream.

On the Lenovo ThinkPad X201, when Intel VT-d is enabled in the BIOS, the
kernel boots with errors related to DMAR, the graphical interface appeared
quite choppy, and the system resets erratically within a minute after it
booted:

DMAR: DRHD: handling fault status reg 3
DMAR: [DMA Write NO_PASID] Request device [00:02.0] fault addr 0xb97ff000
[fault reason 0x05] PTE Write access is not set

Upon comparing boot logs with VT-d on/off, I found that the Intel Calpella
quirk (`quirk_calpella_no_shadow_gtt()') correctly applied the igfx IOMMU
disable/quirk correctly:

pci 0000:00:00.0: DMAR: BIOS has allocated no shadow GTT; disabling IOMMU
for graphics

Whereas with VT-d on, it went into the "else" branch, which then
triggered the DMAR handling fault above:

... else if (!disable_igfx_iommu) {
	/* we have to ensure the gfx device is idle before we flush */
	pci_info(dev, "Disabling batched IOTLB flush on Ironlake\n");
	iommu_set_dma_strict();
}

Now, this is not exactly scientific, but moving 0x0044 to quirk_iommu_igfx
seems to have fixed the aforementioned issue. Running a few `git blame'
runs on the function, I have found that the quirk was originally
introduced as a fix specific to ThinkPad X201:

commit 9eecabcb9a92 ("intel-iommu: Abort IOMMU setup for igfx if BIOS gave
no shadow GTT space")

Which was later revised twice to the "else" branch we saw above:

- 2011: commit 6fbcfb3e467a ("intel-iommu: Workaround IOTLB hang on
  Ironlake GPU")
- 2024: commit ba00196ca41c ("iommu/vt-d: Decouple igfx_off from graphic
  identity mapping")

I'm uncertain whether further testings on this particular laptops were
done in 2011 and (honestly I'm not sure) 2024, but I would be happy to do
some distro-specific testing if that's what would be required to verify
this patch.

P.S., I also see IDs 0x0040, 0x0062, and 0x006a listed under the same
`quirk_calpella_no_shadow_gtt()' quirk, but I'm not sure how similar these
chipsets are (if they share the same issue with VT-d or even, indeed, if
this issue is specific to a bug in the Lenovo BIOS). With regards to
0x0062, it seems to be a Centrino wireless card, but not a chipset?

I have also listed a couple (distro and kernel) bug reports below as
references (some of them are from 7-8 years ago!), as they seem to be
similar issue found on different Westmere/Ironlake, Haswell, and Broadwell
hardware setups.

Cc: stable@vger.kernel.org
Fixes: 6fbcfb3e467a ("intel-iommu: Workaround IOTLB hang on Ironlake GPU")
Fixes: ba00196ca41c ("iommu/vt-d: Decouple igfx_off from graphic identity mapping")
Link: https://groups.google.com/g/qubes-users/c/4NP4goUds2c?pli=1
Link: https://bugs.archlinux.org/task/65362
Link: https://bbs.archlinux.org/viewtopic.php?id=230323
Reported-by: Wenhao Sun <weiguangtwk@outlook.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=197029
Signed-off-by: Mingcong Bai <jeffbai@aosc.io>
Link: https://lore.kernel.org/r/20250415133330.12528-1-jeffbai@aosc.io
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/iommu/intel/iommu.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/drivers/iommu/intel/iommu.c
+++ b/drivers/iommu/intel/iommu.c
@@ -4504,6 +4504,9 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_I
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x2e40, quirk_iommu_igfx);
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x2e90, quirk_iommu_igfx);
 
+/* QM57/QS57 integrated gfx malfunctions with dmar */
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x0044, quirk_iommu_igfx);
+
 /* Broadwell igfx malfunctions with dmar */
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x1606, quirk_iommu_igfx);
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x160B, quirk_iommu_igfx);
@@ -4581,7 +4584,6 @@ static void quirk_calpella_no_shadow_gtt
 	}
 }
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x0040, quirk_calpella_no_shadow_gtt);
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x0044, quirk_calpella_no_shadow_gtt);
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x0062, quirk_calpella_no_shadow_gtt);
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x006a, quirk_calpella_no_shadow_gtt);
 

[PATCH 6.14 037/183] iommu: Fix two issues in iommu_copy_struct_from_user()

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Nicolin Chen <nicolinc@nvidia.com>

commit 30a3f2f3e4bd6335b727c83c08a982d969752bc1 upstream.

In the review for iommu_copy_struct_to_user() helper, Matt pointed out that
a NULL pointer should be rejected prior to dereferencing it:
https://lore.kernel.org/all/86881827-8E2D-461C-BDA3-FA8FD14C343C@nvidia.com

And Alok pointed out a typo at the same time:
https://lore.kernel.org/all/480536af-6830-43ce-a327-adbd13dc3f1d@oracle.com

Since both issues were copied from iommu_copy_struct_from_user(), fix them
first in the current header.

Fixes: e9d36c07bb78 ("iommu: Add iommu_copy_struct_from_user helper")
Cc: stable@vger.kernel.org
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Matthew R. Ochs <mochs@nvidia.com>
Link: https://lore.kernel.org/r/20250414191635.450472-1-nicolinc@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/linux/iommu.h |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

--- a/include/linux/iommu.h
+++ b/include/linux/iommu.h
@@ -425,10 +425,10 @@ static inline int __iommu_copy_struct_fr
 	void *dst_data, const struct iommu_user_data *src_data,
 	unsigned int data_type, size_t data_len, size_t min_len)
 {
-	if (src_data->type != data_type)
-		return -EINVAL;
 	if (WARN_ON(!dst_data || !src_data))
 		return -EINVAL;
+	if (src_data->type != data_type)
+		return -EINVAL;
 	if (src_data->len < min_len || data_len < src_data->len)
 		return -EINVAL;
 	return copy_struct_from_user(dst_data, data_len, src_data->uptr,
@@ -441,8 +441,8 @@ static inline int __iommu_copy_struct_fr
  *        include/uapi/linux/iommufd.h
  * @user_data: Pointer to a struct iommu_user_data for user space data info
  * @data_type: The data type of the @kdst. Must match with @user_data->type
- * @min_last: The last memember of the data structure @kdst points in the
- *            initial version.
+ * @min_last: The last member of the data structure @kdst points in the initial
+ *            version.
  * Return 0 for success, otherwise -error.
  */
 #define iommu_copy_struct_from_user(kdst, user_data, data_type, min_last) \

[PATCH 6.14 038/183] platform/x86/amd: pmc: Require at least 2.5 seconds between HW sleep cycles

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mario Limonciello <mario.limonciello@amd.com>

commit 9f5595d5f03fd4dc640607a71e89a1daa68fd19d upstream.

When an APU exits HW sleep with no active wake sources the Linux kernel will
rapidly assert that the APU can enter back into HW sleep. This happens in a
few ms. Contrasting this to Windows, Windows can take 10s of seconds to
enter back into the resiliency phase for Modern Standby.

For some situations this can be problematic because it can cause leakage
from VDDCR_SOC to VDD_MISC and force VDD_MISC outside of the electrical
design guide specifications. On some designs this will trip the over
voltage protection feature (OVP) of the voltage regulator module, but it
could cause APU damage as well.

To prevent this risk, add an explicit sleep call so that future attempts
to enter into HW sleep will have enough time to settle. This will occur
while the screen is dark and only on cases that the APU should enter HW
sleep again, so it shouldn't be noticeable to any user.

Cc: stable@vger.kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20250414162446.3853194-1-superm1@kernel.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/platform/x86/amd/pmc/pmc.c |    7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

--- a/drivers/platform/x86/amd/pmc/pmc.c
+++ b/drivers/platform/x86/amd/pmc/pmc.c
@@ -724,10 +724,9 @@ static void amd_pmc_s2idle_check(void)
 	struct smu_metrics table;
 	int rc;
 
-	/* CZN: Ensure that future s0i3 entry attempts at least 10ms passed */
-	if (pdev->cpu_id == AMD_CPU_ID_CZN && !get_metrics_table(pdev, &table) &&
-	    table.s0i3_last_entry_status)
-		usleep_range(10000, 20000);
+	/* Avoid triggering OVP */
+	if (!get_metrics_table(pdev, &table) && table.s0i3_last_entry_status)
+		msleep(2500);
 
 	/* Dump the IdleMask before we add to the STB */
 	amd_pmc_idlemask_read(pdev, pdev->dev, NULL);

[PATCH 6.14 039/183] platform/x86/intel-uncore-freq: Fix missing uncore sysfs during CPU hotplug

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Shouye Liu <shouyeliu@tencent.com>

commit 8d6955ed76e8a47115f2ea1d9c263ee6f505d737 upstream.

In certain situations, the sysfs for uncore may not be present when all
CPUs in a package are offlined and then brought back online after boot.

This issue can occur if there is an error in adding the sysfs entry due
to a memory allocation failure. Retrying to bring the CPUs online will
not resolve the issue, as the uncore_cpu_mask is already set for the
package before the failure condition occurs.

This issue does not occur if the failure happens during module
initialization, as the module will fail to load in the event of any
error.

To address this, ensure that the uncore_cpu_mask is not set until the
successful return of uncore_freq_add_entry().

Fixes: dbce412a7733 ("platform/x86/intel-uncore-freq: Split common and enumeration part")
Signed-off-by: Shouye Liu <shouyeliu@tencent.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250417032321.75580-1-shouyeliu@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/platform/x86/intel/uncore-frequency/uncore-frequency.c |   13 ++++++----
 1 file changed, 9 insertions(+), 4 deletions(-)

--- a/drivers/platform/x86/intel/uncore-frequency/uncore-frequency.c
+++ b/drivers/platform/x86/intel/uncore-frequency/uncore-frequency.c
@@ -146,15 +146,13 @@ static int uncore_event_cpu_online(unsig
 {
 	struct uncore_data *data;
 	int target;
+	int ret;
 
 	/* Check if there is an online cpu in the package for uncore MSR */
 	target = cpumask_any_and(&uncore_cpu_mask, topology_die_cpumask(cpu));
 	if (target < nr_cpu_ids)
 		return 0;
 
-	/* Use this CPU on this die as a control CPU */
-	cpumask_set_cpu(cpu, &uncore_cpu_mask);
-
 	data = uncore_get_instance(cpu);
 	if (!data)
 		return 0;
@@ -163,7 +161,14 @@ static int uncore_event_cpu_online(unsig
 	data->die_id = topology_die_id(cpu);
 	data->domain_id = UNCORE_DOMAIN_ID_INVALID;
 
-	return uncore_freq_add_entry(data, cpu);
+	ret = uncore_freq_add_entry(data, cpu);
+	if (ret)
+		return ret;
+
+	/* Use this CPU on this die as a control CPU */
+	cpumask_set_cpu(cpu, &uncore_cpu_mask);
+
+	return 0;
 }
 
 static int uncore_event_cpu_offline(unsigned int cpu)

[PATCH 6.14 040/183] ksmbd: fix use-after-free in ksmbd_session_rpc_open

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Namjae Jeon <linkinjeon@kernel.org>

commit a1f46c99d9ea411f9bf30025b912d881d36fc709 upstream.

A UAF issue can occur due to a race condition between
ksmbd_session_rpc_open() and __session_rpc_close().
Add rpc_lock to the session to protect it.

Cc: stable@vger.kernel.org
Reported-by: Norbert Szetei <norbert@doyensec.com>
Tested-by: Norbert Szetei <norbert@doyensec.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/smb/server/mgmt/user_session.c |   20 ++++++++++++++------
 fs/smb/server/mgmt/user_session.h |    1 +
 2 files changed, 15 insertions(+), 6 deletions(-)

--- a/fs/smb/server/mgmt/user_session.c
+++ b/fs/smb/server/mgmt/user_session.c
@@ -59,10 +59,12 @@ static void ksmbd_session_rpc_clear_list
 	struct ksmbd_session_rpc *entry;
 	long index;
 
+	down_write(&sess->rpc_lock);
 	xa_for_each(&sess->rpc_handle_list, index, entry) {
 		xa_erase(&sess->rpc_handle_list, index);
 		__session_rpc_close(sess, entry);
 	}
+	up_write(&sess->rpc_lock);
 
 	xa_destroy(&sess->rpc_handle_list);
 }
@@ -92,7 +94,7 @@ int ksmbd_session_rpc_open(struct ksmbd_
 {
 	struct ksmbd_session_rpc *entry, *old;
 	struct ksmbd_rpc_command *resp;
-	int method;
+	int method, id;
 
 	method = __rpc_method(rpc_name);
 	if (!method)
@@ -102,26 +104,29 @@ int ksmbd_session_rpc_open(struct ksmbd_
 	if (!entry)
 		return -ENOMEM;
 
+	down_read(&sess->rpc_lock);
 	entry->method = method;
-	entry->id = ksmbd_ipc_id_alloc();
-	if (entry->id < 0)
+	entry->id = id = ksmbd_ipc_id_alloc();
+	if (id < 0)
 		goto free_entry;
-	old = xa_store(&sess->rpc_handle_list, entry->id, entry, KSMBD_DEFAULT_GFP);
+	old = xa_store(&sess->rpc_handle_list, id, entry, KSMBD_DEFAULT_GFP);
 	if (xa_is_err(old))
 		goto free_id;
 
-	resp = ksmbd_rpc_open(sess, entry->id);
+	resp = ksmbd_rpc_open(sess, id);
 	if (!resp)
 		goto erase_xa;
 
+	up_read(&sess->rpc_lock);
 	kvfree(resp);
-	return entry->id;
+	return id;
 erase_xa:
 	xa_erase(&sess->rpc_handle_list, entry->id);
 free_id:
 	ksmbd_rpc_id_free(entry->id);
 free_entry:
 	kfree(entry);
+	up_read(&sess->rpc_lock);
 	return -EINVAL;
 }
 
@@ -129,9 +134,11 @@ void ksmbd_session_rpc_close(struct ksmb
 {
 	struct ksmbd_session_rpc *entry;
 
+	down_write(&sess->rpc_lock);
 	entry = xa_erase(&sess->rpc_handle_list, id);
 	if (entry)
 		__session_rpc_close(sess, entry);
+	up_write(&sess->rpc_lock);
 }
 
 int ksmbd_session_rpc_method(struct ksmbd_session *sess, int id)
@@ -439,6 +446,7 @@ static struct ksmbd_session *__session_c
 	sess->sequence_number = 1;
 	rwlock_init(&sess->tree_conns_lock);
 	atomic_set(&sess->refcnt, 2);
+	init_rwsem(&sess->rpc_lock);
 
 	ret = __init_smb2_session(sess);
 	if (ret)
--- a/fs/smb/server/mgmt/user_session.h
+++ b/fs/smb/server/mgmt/user_session.h
@@ -63,6 +63,7 @@ struct ksmbd_session {
 	rwlock_t			tree_conns_lock;
 
 	atomic_t			refcnt;
+	struct rw_semaphore		rpc_lock;
 };
 
 static inline int test_session_flag(struct ksmbd_session *sess, int bit)

[PATCH 6.14 041/183] ksmbd: fix use-after-free in kerberos authentication

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sean Heelan <seanheelan@gmail.com>

commit e86e9134e1d1c90a960dd57f59ce574d27b9a124 upstream.

Setting sess->user = NULL was introduced to fix the dangling pointer
created by ksmbd_free_user. However, it is possible another thread could
be operating on the session and make use of sess->user after it has been
passed to ksmbd_free_user but before sess->user is set to NULL.

Cc: stable@vger.kernel.org
Signed-off-by: Sean Heelan <seanheelan@gmail.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/smb/server/auth.c    |   14 +++++++++++++-
 fs/smb/server/smb2pdu.c |    5 -----
 2 files changed, 13 insertions(+), 6 deletions(-)

--- a/fs/smb/server/auth.c
+++ b/fs/smb/server/auth.c
@@ -550,7 +550,19 @@ int ksmbd_krb5_authenticate(struct ksmbd
 		retval = -ENOMEM;
 		goto out;
 	}
-	sess->user = user;
+
+	if (!sess->user) {
+		/* First successful authentication */
+		sess->user = user;
+	} else {
+		if (!ksmbd_compare_user(sess->user, user)) {
+			ksmbd_debug(AUTH, "different user tried to reuse session\n");
+			retval = -EPERM;
+			ksmbd_free_user(user);
+			goto out;
+		}
+		ksmbd_free_user(user);
+	}
 
 	memcpy(sess->sess_key, resp->payload, resp->session_key_len);
 	memcpy(out_blob, resp->payload + resp->session_key_len,
--- a/fs/smb/server/smb2pdu.c
+++ b/fs/smb/server/smb2pdu.c
@@ -1602,11 +1602,6 @@ static int krb5_authenticate(struct ksmb
 	if (prev_sess_id && prev_sess_id != sess->id)
 		destroy_previous_session(conn, sess->user, prev_sess_id);
 
-	if (sess->state == SMB2_SESSION_VALID) {
-		ksmbd_free_user(sess->user);
-		sess->user = NULL;
-	}
-
 	retval = ksmbd_krb5_authenticate(sess, in_blob, in_len,
 					 out_blob, &out_len);
 	if (retval) {

[PATCH 6.14 042/183] ksmbd: fix use-after-free in session logoff

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sean Heelan <seanheelan@gmail.com>

commit 2fc9feff45d92a92cd5f96487655d5be23fb7e2b upstream.

The sess->user object can currently be in use by another thread, for
example if another connection has sent a session setup request to
bind to the session being free'd. The handler for that connection could
be in the smb2_sess_setup function which makes use of sess->user.

Cc: stable@vger.kernel.org
Signed-off-by: Sean Heelan <seanheelan@gmail.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/smb/server/smb2pdu.c |    4 ----
 1 file changed, 4 deletions(-)

--- a/fs/smb/server/smb2pdu.c
+++ b/fs/smb/server/smb2pdu.c
@@ -2244,10 +2244,6 @@ int smb2_session_logoff(struct ksmbd_wor
 	sess->state = SMB2_SESSION_EXPIRED;
 	up_write(&conn->session_lock);
 
-	if (sess->user) {
-		ksmbd_free_user(sess->user);
-		sess->user = NULL;
-	}
 	ksmbd_all_conn_set_status(sess_id, KSMBD_SESS_NEED_SETUP);
 
 	rsp->StructureSize = cpu_to_le16(4);

[PATCH 6.14 043/183] smb: client: fix zero length for mkdir POSIX create context

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jethro Donaldson <devel@jro.nz>

commit 74c72419ec8da5cbc9c49410d3c44bb954538bdd upstream.

SMB create requests issued via smb311_posix_mkdir() have an incorrect
length of zero bytes for the POSIX create context data. ksmbd server
rejects such requests and logs "cli req too short" causing mkdir to fail
with "invalid argument" on the client side.  It also causes subsequent
rmmod to crash in cifs_destroy_request_bufs()

Inspection of packets sent by cifs.ko using wireshark show valid data for
the SMB2_POSIX_CREATE_CONTEXT is appended with the correct offset, but
with an incorrect length of zero bytes. Fails with ksmbd+cifs.ko only as
Windows server/client does not use POSIX extensions.

Fix smb311_posix_mkdir() to set req->CreateContextsLength as part of
appending the POSIX creation context to the request.

Signed-off-by: Jethro Donaldson <devel@jro.nz>
Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Reviewed-by: Namjae Jeon <linkinjeon@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/smb/client/smb2pdu.c |    1 +
 1 file changed, 1 insertion(+)

--- a/fs/smb/client/smb2pdu.c
+++ b/fs/smb/client/smb2pdu.c
@@ -2920,6 +2920,7 @@ replay_again:
 		req->CreateContextsOffset = cpu_to_le32(
 			sizeof(struct smb2_create_req) +
 			iov[1].iov_len);
+		le32_add_cpu(&req->CreateContextsLength, iov[n_iov-1].iov_len);
 		pc_buf = iov[n_iov-1].iov_base;
 	}
 

[PATCH 6.14 044/183] cpufreq: Avoid using inconsistent policy->min and policy->max

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

commit 7491cdf46b5cbdf123fc84fbe0a07e9e3d7b7620 upstream.

Since cpufreq_driver_resolve_freq() can run in parallel with
cpufreq_set_policy() and there is no synchronization between them,
the former may access policy->min and policy->max while the latter
is updating them and it may see intermediate values of them due
to the way the update is carried out.  Also the compiler is free
to apply any optimizations it wants both to the stores in
cpufreq_set_policy() and to the loads in cpufreq_driver_resolve_freq()
which may result in additional inconsistencies.

To address this, use WRITE_ONCE() when updating policy->min and
policy->max in cpufreq_set_policy() and use READ_ONCE() for reading
them in cpufreq_driver_resolve_freq().  Moreover, rearrange the update
in cpufreq_set_policy() to avoid storing intermediate values in
policy->min and policy->max with the help of the observation that
their new values are expected to be properly ordered upfront.

Also modify cpufreq_driver_resolve_freq() to take the possible reverse
ordering of policy->min and policy->max, which may happen depending on
the ordering of operations when this function and cpufreq_set_policy()
run concurrently, into account by always honoring the max when it
turns out to be less than the min (in case it comes from thermal
throttling or similar).

Fixes: 151717690694 ("cpufreq: Make policy min/max hard requirements")
Cc: 5.16+ <stable@vger.kernel.org> # 5.16+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Christian Loehle <christian.loehle@arm.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://patch.msgid.link/5907080.DvuYhMxLoT@rjwysocki.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/cpufreq/cpufreq.c |   32 +++++++++++++++++++++++++-------
 1 file changed, 25 insertions(+), 7 deletions(-)

--- a/drivers/cpufreq/cpufreq.c
+++ b/drivers/cpufreq/cpufreq.c
@@ -539,8 +539,6 @@ static unsigned int __resolve_freq(struc
 {
 	unsigned int idx;
 
-	target_freq = clamp_val(target_freq, policy->min, policy->max);
-
 	if (!policy->freq_table)
 		return target_freq;
 
@@ -564,7 +562,22 @@ static unsigned int __resolve_freq(struc
 unsigned int cpufreq_driver_resolve_freq(struct cpufreq_policy *policy,
 					 unsigned int target_freq)
 {
-	return __resolve_freq(policy, target_freq, CPUFREQ_RELATION_LE);
+	unsigned int min = READ_ONCE(policy->min);
+	unsigned int max = READ_ONCE(policy->max);
+
+	/*
+	 * If this function runs in parallel with cpufreq_set_policy(), it may
+	 * read policy->min before the update and policy->max after the update
+	 * or the other way around, so there is no ordering guarantee.
+	 *
+	 * Resolve this by always honoring the max (in case it comes from
+	 * thermal throttling or similar).
+	 */
+	if (unlikely(min > max))
+		min = max;
+
+	return __resolve_freq(policy, clamp_val(target_freq, min, max),
+			      CPUFREQ_RELATION_LE);
 }
 EXPORT_SYMBOL_GPL(cpufreq_driver_resolve_freq);
 
@@ -2337,6 +2350,7 @@ int __cpufreq_driver_target(struct cpufr
 	if (cpufreq_disabled())
 		return -ENODEV;
 
+	target_freq = clamp_val(target_freq, policy->min, policy->max);
 	target_freq = __resolve_freq(policy, target_freq, relation);
 
 	pr_debug("target for CPU %u: %u kHz, relation %u, requested %u kHz\n",
@@ -2661,11 +2675,15 @@ static int cpufreq_set_policy(struct cpu
 	 * Resolve policy min/max to available frequencies. It ensures
 	 * no frequency resolution will neither overshoot the requested maximum
 	 * nor undershoot the requested minimum.
+	 *
+	 * Avoid storing intermediate values in policy->max or policy->min and
+	 * compiler optimizations around them because they may be accessed
+	 * concurrently by cpufreq_driver_resolve_freq() during the update.
 	 */
-	policy->min = new_data.min;
-	policy->max = new_data.max;
-	policy->min = __resolve_freq(policy, policy->min, CPUFREQ_RELATION_L);
-	policy->max = __resolve_freq(policy, policy->max, CPUFREQ_RELATION_H);
+	WRITE_ONCE(policy->max, __resolve_freq(policy, new_data.max, CPUFREQ_RELATION_H));
+	new_data.min = __resolve_freq(policy, new_data.min, CPUFREQ_RELATION_L);
+	WRITE_ONCE(policy->min, new_data.min > policy->max ? policy->max : new_data.min);
+
 	trace_cpu_frequency_limits(policy);
 
 	cpufreq_update_pressure(policy);

[PATCH 6.14 045/183] cpufreq: Fix setting policy limits when frequency tables are used

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

commit b79028039f440e7d2c4df6ab243060c4e3803e84 upstream.

Commit 7491cdf46b5c ("cpufreq: Avoid using inconsistent policy->min and
policy->max") overlooked the fact that policy->min and policy->max were
accessed directly in cpufreq_frequency_table_target() and in the
functions called by it.  Consequently, the changes made by that commit
led to problems with setting policy limits.

Address this by passing the target frequency limits to __resolve_freq()
and cpufreq_frequency_table_target() and propagating them to the
functions called by the latter.

Fixes: 7491cdf46b5c ("cpufreq: Avoid using inconsistent policy->min and policy->max")
Cc: 5.16+ <stable@vger.kernel.org> # 5.16+
Closes: https://lore.kernel.org/linux-pm/aAplED3IA_J0eZN0@linaro.org/
Reported-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Reviewed-by: Lifeng Zheng <zhenglifeng1@huawei.com>
Link: https://patch.msgid.link/5896780.DvuYhMxLoT@rjwysocki.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/cpufreq/cpufreq.c          |   22 ++++++---
 drivers/cpufreq/cpufreq_ondemand.c |    3 -
 drivers/cpufreq/freq_table.c       |    6 +-
 include/linux/cpufreq.h            |   83 ++++++++++++++++++++++++-------------
 4 files changed, 73 insertions(+), 41 deletions(-)

--- a/drivers/cpufreq/cpufreq.c
+++ b/drivers/cpufreq/cpufreq.c
@@ -535,14 +535,18 @@ void cpufreq_disable_fast_switch(struct
 EXPORT_SYMBOL_GPL(cpufreq_disable_fast_switch);
 
 static unsigned int __resolve_freq(struct cpufreq_policy *policy,
-		unsigned int target_freq, unsigned int relation)
+				   unsigned int target_freq,
+				   unsigned int min, unsigned int max,
+				   unsigned int relation)
 {
 	unsigned int idx;
 
+	target_freq = clamp_val(target_freq, min, max);
+
 	if (!policy->freq_table)
 		return target_freq;
 
-	idx = cpufreq_frequency_table_target(policy, target_freq, relation);
+	idx = cpufreq_frequency_table_target(policy, target_freq, min, max, relation);
 	policy->cached_resolved_idx = idx;
 	policy->cached_target_freq = target_freq;
 	return policy->freq_table[idx].frequency;
@@ -576,8 +580,7 @@ unsigned int cpufreq_driver_resolve_freq
 	if (unlikely(min > max))
 		min = max;
 
-	return __resolve_freq(policy, clamp_val(target_freq, min, max),
-			      CPUFREQ_RELATION_LE);
+	return __resolve_freq(policy, target_freq, min, max, CPUFREQ_RELATION_LE);
 }
 EXPORT_SYMBOL_GPL(cpufreq_driver_resolve_freq);
 
@@ -2350,8 +2353,8 @@ int __cpufreq_driver_target(struct cpufr
 	if (cpufreq_disabled())
 		return -ENODEV;
 
-	target_freq = clamp_val(target_freq, policy->min, policy->max);
-	target_freq = __resolve_freq(policy, target_freq, relation);
+	target_freq = __resolve_freq(policy, target_freq, policy->min,
+				     policy->max, relation);
 
 	pr_debug("target for CPU %u: %u kHz, relation %u, requested %u kHz\n",
 		 policy->cpu, target_freq, relation, old_target_freq);
@@ -2680,8 +2683,11 @@ static int cpufreq_set_policy(struct cpu
 	 * compiler optimizations around them because they may be accessed
 	 * concurrently by cpufreq_driver_resolve_freq() during the update.
 	 */
-	WRITE_ONCE(policy->max, __resolve_freq(policy, new_data.max, CPUFREQ_RELATION_H));
-	new_data.min = __resolve_freq(policy, new_data.min, CPUFREQ_RELATION_L);
+	WRITE_ONCE(policy->max, __resolve_freq(policy, new_data.max,
+					       new_data.min, new_data.max,
+					       CPUFREQ_RELATION_H));
+	new_data.min = __resolve_freq(policy, new_data.min, new_data.min,
+				      new_data.max, CPUFREQ_RELATION_L);
 	WRITE_ONCE(policy->min, new_data.min > policy->max ? policy->max : new_data.min);
 
 	trace_cpu_frequency_limits(policy);
--- a/drivers/cpufreq/cpufreq_ondemand.c
+++ b/drivers/cpufreq/cpufreq_ondemand.c
@@ -76,7 +76,8 @@ static unsigned int generic_powersave_bi
 		return freq_next;
 	}
 
-	index = cpufreq_frequency_table_target(policy, freq_next, relation);
+	index = cpufreq_frequency_table_target(policy, freq_next, policy->min,
+					       policy->max, relation);
 	freq_req = freq_table[index].frequency;
 	freq_reduc = freq_req * od_tuners->powersave_bias / 1000;
 	freq_avg = freq_req - freq_reduc;
--- a/drivers/cpufreq/freq_table.c
+++ b/drivers/cpufreq/freq_table.c
@@ -116,8 +116,8 @@ int cpufreq_generic_frequency_table_veri
 EXPORT_SYMBOL_GPL(cpufreq_generic_frequency_table_verify);
 
 int cpufreq_table_index_unsorted(struct cpufreq_policy *policy,
-				 unsigned int target_freq,
-				 unsigned int relation)
+				 unsigned int target_freq, unsigned int min,
+				 unsigned int max, unsigned int relation)
 {
 	struct cpufreq_frequency_table optimal = {
 		.driver_data = ~0,
@@ -148,7 +148,7 @@ int cpufreq_table_index_unsorted(struct
 	cpufreq_for_each_valid_entry_idx(pos, table, i) {
 		freq = pos->frequency;
 
-		if ((freq < policy->min) || (freq > policy->max))
+		if (freq < min || freq > max)
 			continue;
 		if (freq == target_freq) {
 			optimal.driver_data = i;
--- a/include/linux/cpufreq.h
+++ b/include/linux/cpufreq.h
@@ -770,8 +770,8 @@ int cpufreq_frequency_table_verify(struc
 int cpufreq_generic_frequency_table_verify(struct cpufreq_policy_data *policy);
 
 int cpufreq_table_index_unsorted(struct cpufreq_policy *policy,
-				 unsigned int target_freq,
-				 unsigned int relation);
+				 unsigned int target_freq, unsigned int min,
+				 unsigned int max, unsigned int relation);
 int cpufreq_frequency_table_get_index(struct cpufreq_policy *policy,
 		unsigned int freq);
 
@@ -836,12 +836,12 @@ static inline int cpufreq_table_find_ind
 	return best;
 }
 
-/* Works only on sorted freq-tables */
-static inline int cpufreq_table_find_index_l(struct cpufreq_policy *policy,
-					     unsigned int target_freq,
-					     bool efficiencies)
+static inline int find_index_l(struct cpufreq_policy *policy,
+			       unsigned int target_freq,
+			       unsigned int min, unsigned int max,
+			       bool efficiencies)
 {
-	target_freq = clamp_val(target_freq, policy->min, policy->max);
+	target_freq = clamp_val(target_freq, min, max);
 
 	if (policy->freq_table_sorted == CPUFREQ_TABLE_SORTED_ASCENDING)
 		return cpufreq_table_find_index_al(policy, target_freq,
@@ -851,6 +851,14 @@ static inline int cpufreq_table_find_ind
 						   efficiencies);
 }
 
+/* Works only on sorted freq-tables */
+static inline int cpufreq_table_find_index_l(struct cpufreq_policy *policy,
+					     unsigned int target_freq,
+					     bool efficiencies)
+{
+	return find_index_l(policy, target_freq, policy->min, policy->max, efficiencies);
+}
+
 /* Find highest freq at or below target in a table in ascending order */
 static inline int cpufreq_table_find_index_ah(struct cpufreq_policy *policy,
 					      unsigned int target_freq,
@@ -904,12 +912,12 @@ static inline int cpufreq_table_find_ind
 	return best;
 }
 
-/* Works only on sorted freq-tables */
-static inline int cpufreq_table_find_index_h(struct cpufreq_policy *policy,
-					     unsigned int target_freq,
-					     bool efficiencies)
+static inline int find_index_h(struct cpufreq_policy *policy,
+			       unsigned int target_freq,
+			       unsigned int min, unsigned int max,
+			       bool efficiencies)
 {
-	target_freq = clamp_val(target_freq, policy->min, policy->max);
+	target_freq = clamp_val(target_freq, min, max);
 
 	if (policy->freq_table_sorted == CPUFREQ_TABLE_SORTED_ASCENDING)
 		return cpufreq_table_find_index_ah(policy, target_freq,
@@ -919,6 +927,14 @@ static inline int cpufreq_table_find_ind
 						   efficiencies);
 }
 
+/* Works only on sorted freq-tables */
+static inline int cpufreq_table_find_index_h(struct cpufreq_policy *policy,
+					     unsigned int target_freq,
+					     bool efficiencies)
+{
+	return find_index_h(policy, target_freq, policy->min, policy->max, efficiencies);
+}
+
 /* Find closest freq to target in a table in ascending order */
 static inline int cpufreq_table_find_index_ac(struct cpufreq_policy *policy,
 					      unsigned int target_freq,
@@ -989,12 +1005,12 @@ static inline int cpufreq_table_find_ind
 	return best;
 }
 
-/* Works only on sorted freq-tables */
-static inline int cpufreq_table_find_index_c(struct cpufreq_policy *policy,
-					     unsigned int target_freq,
-					     bool efficiencies)
+static inline int find_index_c(struct cpufreq_policy *policy,
+			       unsigned int target_freq,
+			       unsigned int min, unsigned int max,
+			       bool efficiencies)
 {
-	target_freq = clamp_val(target_freq, policy->min, policy->max);
+	target_freq = clamp_val(target_freq, min, max);
 
 	if (policy->freq_table_sorted == CPUFREQ_TABLE_SORTED_ASCENDING)
 		return cpufreq_table_find_index_ac(policy, target_freq,
@@ -1004,7 +1020,17 @@ static inline int cpufreq_table_find_ind
 						   efficiencies);
 }
 
-static inline bool cpufreq_is_in_limits(struct cpufreq_policy *policy, int idx)
+/* Works only on sorted freq-tables */
+static inline int cpufreq_table_find_index_c(struct cpufreq_policy *policy,
+					     unsigned int target_freq,
+					     bool efficiencies)
+{
+	return find_index_c(policy, target_freq, policy->min, policy->max, efficiencies);
+}
+
+static inline bool cpufreq_is_in_limits(struct cpufreq_policy *policy,
+					unsigned int min, unsigned int max,
+					int idx)
 {
 	unsigned int freq;
 
@@ -1013,11 +1039,13 @@ static inline bool cpufreq_is_in_limits(
 
 	freq = policy->freq_table[idx].frequency;
 
-	return freq == clamp_val(freq, policy->min, policy->max);
+	return freq == clamp_val(freq, min, max);
 }
 
 static inline int cpufreq_frequency_table_target(struct cpufreq_policy *policy,
 						 unsigned int target_freq,
+						 unsigned int min,
+						 unsigned int max,
 						 unsigned int relation)
 {
 	bool efficiencies = policy->efficiencies_available &&
@@ -1028,29 +1056,26 @@ static inline int cpufreq_frequency_tabl
 	relation &= ~CPUFREQ_RELATION_E;
 
 	if (unlikely(policy->freq_table_sorted == CPUFREQ_TABLE_UNSORTED))
-		return cpufreq_table_index_unsorted(policy, target_freq,
-						    relation);
+		return cpufreq_table_index_unsorted(policy, target_freq, min,
+						    max, relation);
 retry:
 	switch (relation) {
 	case CPUFREQ_RELATION_L:
-		idx = cpufreq_table_find_index_l(policy, target_freq,
-						 efficiencies);
+		idx = find_index_l(policy, target_freq, min, max, efficiencies);
 		break;
 	case CPUFREQ_RELATION_H:
-		idx = cpufreq_table_find_index_h(policy, target_freq,
-						 efficiencies);
+		idx = find_index_h(policy, target_freq, min, max, efficiencies);
 		break;
 	case CPUFREQ_RELATION_C:
-		idx = cpufreq_table_find_index_c(policy, target_freq,
-						 efficiencies);
+		idx = find_index_c(policy, target_freq, min, max, efficiencies);
 		break;
 	default:
 		WARN_ON_ONCE(1);
 		return 0;
 	}
 
-	/* Limit frequency index to honor policy->min/max */
-	if (!cpufreq_is_in_limits(policy, idx) && efficiencies) {
+	/* Limit frequency index to honor min and max */
+	if (!cpufreq_is_in_limits(policy, min, max, idx) && efficiencies) {
 		efficiencies = false;
 		goto retry;
 	}

[PATCH 6.14 046/183] tracing: Fix oob write in trace_seq_to_buffer()

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jeongjun Park <aha310510@gmail.com>

commit f5178c41bb43444a6008150fe6094497135d07cb upstream.

syzbot reported this bug:
==================================================================
BUG: KASAN: slab-out-of-bounds in trace_seq_to_buffer kernel/trace/trace.c:1830 [inline]
BUG: KASAN: slab-out-of-bounds in tracing_splice_read_pipe+0x6be/0xdd0 kernel/trace/trace.c:6822
Write of size 4507 at addr ffff888032b6b000 by task syz.2.320/7260

CPU: 1 UID: 0 PID: 7260 Comm: syz.2.320 Not tainted 6.15.0-rc1-syzkaller-00301-g3bde70a2c827 #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/12/2025
Call Trace:
 <TASK>
 __dump_stack lib/dump_stack.c:94 [inline]
 dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:120
 print_address_description mm/kasan/report.c:408 [inline]
 print_report+0xc3/0x670 mm/kasan/report.c:521
 kasan_report+0xe0/0x110 mm/kasan/report.c:634
 check_region_inline mm/kasan/generic.c:183 [inline]
 kasan_check_range+0xef/0x1a0 mm/kasan/generic.c:189
 __asan_memcpy+0x3c/0x60 mm/kasan/shadow.c:106
 trace_seq_to_buffer kernel/trace/trace.c:1830 [inline]
 tracing_splice_read_pipe+0x6be/0xdd0 kernel/trace/trace.c:6822
 ....
==================================================================

It has been reported that trace_seq_to_buffer() tries to copy more data
than PAGE_SIZE to buf. Therefore, to prevent this, we should use the
smaller of trace_seq_used(&iter->seq) and PAGE_SIZE as an argument.

Link: https://lore.kernel.org/20250422113026.13308-1-aha310510@gmail.com
Reported-by: syzbot+c8cd2d2c412b868263fb@syzkaller.appspotmail.com
Fixes: 3c56819b14b0 ("tracing: splice support for tracing_pipe")
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Jeongjun Park <aha310510@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 kernel/trace/trace.c |    5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

--- a/kernel/trace/trace.c
+++ b/kernel/trace/trace.c
@@ -6682,13 +6682,14 @@ static ssize_t tracing_splice_read_pipe(
 		/* Copy the data into the page, so we can start over. */
 		ret = trace_seq_to_buffer(&iter->seq,
 					  page_address(spd.pages[i]),
-					  trace_seq_used(&iter->seq));
+					  min((size_t)trace_seq_used(&iter->seq),
+						  PAGE_SIZE));
 		if (ret < 0) {
 			__free_page(spd.pages[i]);
 			break;
 		}
 		spd.partial[i].offset = 0;
-		spd.partial[i].len = trace_seq_used(&iter->seq);
+		spd.partial[i].len = ret;
 
 		trace_seq_init(&iter->seq);
 	}

[PATCH 6.14 047/183] bcachefs: Remove incorrect __counted_by annotation

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alan Huang <mmpgouride@gmail.com>

commit 6846100b00d97d3d6f05766ae86a0d821d849e78 upstream.

This actually reverts 86e92eeeb237 ("bcachefs: Annotate struct bch_xattr
with __counted_by()").

After the x_name, there is a value. According to the disscussion[1],
__counted_by assumes that the flexible array member contains exactly
the amount of elements that are specified. Now there are users came across
a false positive detection of an out of bounds write caused by
the __counted_by here[2], so revert that.

[1] https://lore.kernel.org/lkml/Zv8VDKWN1GzLRT-_@archlinux/T/#m0ce9541c5070146320efd4f928cc1ff8de69e9b2
[2] https://privatebin.net/?a0d4e97d590d71e1#9bLmp2Kb5NU6X6cZEucchDcu88HzUQwHUah8okKPReEt

Signed-off-by: Alan Huang <mmpgouride@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/bcachefs/xattr_format.h |    8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

--- a/fs/bcachefs/xattr_format.h
+++ b/fs/bcachefs/xattr_format.h
@@ -13,7 +13,13 @@ struct bch_xattr {
 	__u8			x_type;
 	__u8			x_name_len;
 	__le16			x_val_len;
-	__u8			x_name[] __counted_by(x_name_len);
+	/*
+	 * x_name contains the name and value counted by
+	 * x_name_len + x_val_len. The introduction of
+	 * __counted_by(x_name_len) caused a false positive
+	 * detection of an out of bounds write.
+	 */
+	__u8			x_name[];
 } __packed __aligned(8);
 
 #endif /* _BCACHEFS_XATTR_FORMAT_H */

[PATCH 6.14 048/183] drm/amd/display: Default IPS to RCG_IN_ACTIVE_IPS2_IN_OFF

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Leo Li <sunpeng.li@amd.com>

commit 6ed0dc3fd39558f48119daf8f99f835deb7d68da upstream.

[Why]

Recent findings show negligible power savings between IPS2 and RCG
during static desktop. In fact, DCN related clocks are higher
when IPS2 is enabled vs RCG.

RCG_IN_ACTIVE is also the default policy for another OS supported by
DC, and it has faster entry/exit.

[How]

Remove previous logic that checked for IPS2 support, and just default
to `DMUB_IPS_RCG_IN_ACTIVE_IPS2_IN_OFF`.

Fixes: 199888aa25b3 ("drm/amd/display: Update IPS default mode for DCN35/DCN351")
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 8f772d79ef39b463ead00ef6f009bebada3a9d49)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c |   20 --------------------
 1 file changed, 20 deletions(-)

--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
@@ -1912,26 +1912,6 @@ static enum dmub_ips_disable_type dm_get
 
 	switch (amdgpu_ip_version(adev, DCE_HWIP, 0)) {
 	case IP_VERSION(3, 5, 0):
-		/*
-		 * On DCN35 systems with Z8 enabled, it's possible for IPS2 + Z8 to
-		 * cause a hard hang. A fix exists for newer PMFW.
-		 *
-		 * As a workaround, for non-fixed PMFW, force IPS1+RCG as the deepest
-		 * IPS state in all cases, except for s0ix and all displays off (DPMS),
-		 * where IPS2 is allowed.
-		 *
-		 * When checking pmfw version, use the major and minor only.
-		 */
-		if ((adev->pm.fw_version & 0x00FFFF00) < 0x005D6300)
-			ret = DMUB_IPS_RCG_IN_ACTIVE_IPS2_IN_OFF;
-		else if (amdgpu_ip_version(adev, GC_HWIP, 0) > IP_VERSION(11, 5, 0))
-			/*
-			 * Other ASICs with DCN35 that have residency issues with
-			 * IPS2 in idle.
-			 * We want them to use IPS2 only in display off cases.
-			 */
-			ret =  DMUB_IPS_RCG_IN_ACTIVE_IPS2_IN_OFF;
-		break;
 	case IP_VERSION(3, 5, 1):
 		ret =  DMUB_IPS_RCG_IN_ACTIVE_IPS2_IN_OFF;
 		break;

[PATCH 6.14 049/183] ASoC: soc-core: Stop using of_property_read_bool() for non-boolean properties

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Geert Uytterhoeven <geert+renesas@glider.be>

commit 6eab7034579917f207ca6d8e3f4e11e85e0ab7d5 upstream.

On R-Car:

    OF: /sound: Read of boolean property 'simple-audio-card,bitclock-master' with a value.
    OF: /sound: Read of boolean property 'simple-audio-card,frame-master' with a value.

or:

    OF: /soc/sound@ec500000/ports/port@0/endpoint: Read of boolean property 'bitclock-master' with a value.
    OF: /soc/sound@ec500000/ports/port@0/endpoint: Read of boolean property 'frame-master' with a value.

The use of of_property_read_bool() for non-boolean properties is
deprecated in favor of of_property_present() when testing for property
presence.

Replace testing for presence before calling of_property_read_u32() by
testing for an -EINVAL return value from the latter, to simplify the
code.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/db10e96fbda121e7456d70e97a013cbfc9755f4d.1737533954.git.geert+renesas@glider.be
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/soc/soc-core.c |   32 +++++++++++++-------------------
 1 file changed, 13 insertions(+), 19 deletions(-)

--- a/sound/soc/soc-core.c
+++ b/sound/soc/soc-core.c
@@ -3046,7 +3046,7 @@ int snd_soc_of_parse_pin_switches(struct
 	unsigned int i, nb_controls;
 	int ret;
 
-	if (!of_property_read_bool(dev->of_node, prop))
+	if (!of_property_present(dev->of_node, prop))
 		return 0;
 
 	strings = devm_kcalloc(dev, nb_controls_max,
@@ -3120,23 +3120,17 @@ int snd_soc_of_parse_tdm_slot(struct dev
 	if (rx_mask)
 		snd_soc_of_get_slot_mask(np, "dai-tdm-slot-rx-mask", rx_mask);
 
-	if (of_property_read_bool(np, "dai-tdm-slot-num")) {
-		ret = of_property_read_u32(np, "dai-tdm-slot-num", &val);
-		if (ret)
-			return ret;
-
-		if (slots)
-			*slots = val;
-	}
-
-	if (of_property_read_bool(np, "dai-tdm-slot-width")) {
-		ret = of_property_read_u32(np, "dai-tdm-slot-width", &val);
-		if (ret)
-			return ret;
+	ret = of_property_read_u32(np, "dai-tdm-slot-num", &val);
+	if (ret && ret != -EINVAL)
+		return ret;
+	if (!ret && slots)
+		*slots = val;
 
-		if (slot_width)
-			*slot_width = val;
-	}
+	ret = of_property_read_u32(np, "dai-tdm-slot-width", &val);
+	if (ret && ret != -EINVAL)
+		return ret;
+	if (!ret && slot_width)
+		*slot_width = val;
 
 	return 0;
 }
@@ -3403,12 +3397,12 @@ unsigned int snd_soc_daifmt_parse_clock_
 	 * check "[prefix]frame-master"
 	 */
 	snprintf(prop, sizeof(prop), "%sbitclock-master", prefix);
-	bit = of_property_read_bool(np, prop);
+	bit = of_property_present(np, prop);
 	if (bit && bitclkmaster)
 		*bitclkmaster = of_parse_phandle(np, prop, 0);
 
 	snprintf(prop, sizeof(prop), "%sframe-master", prefix);
-	frame = of_property_read_bool(np, prop);
+	frame = of_property_present(np, prop);
 	if (frame && framemaster)
 		*framemaster = of_parse_phandle(np, prop, 0);
 

[PATCH 6.14 050/183] ASoC: cs-amp-lib-test: Dont select SND_SOC_CS_AMP_LIB

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Richard Fitzgerald <rf@opensource.cirrus.com>

[ Upstream commit 96014d91cffb335d3b396771524ff2aba3549865 ]

Depend on SND_SOC_CS_AMP_LIB instead of selecting it.

KUNIT_ALL_TESTS should only build tests for components that are
already being built, it should not cause other stuff to be added
to the build.

Fixes: 177862317a98 ("ASoC: cs-amp-lib: Add KUnit test for calibration helpers")
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20250411123608.1676462-3-rf@opensource.cirrus.com
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/Kconfig | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig
index ee35f3aa55216..0138cfabbb038 100644
--- a/sound/soc/codecs/Kconfig
+++ b/sound/soc/codecs/Kconfig
@@ -763,10 +763,9 @@ config SND_SOC_CS_AMP_LIB
 	tristate
 
 config SND_SOC_CS_AMP_LIB_TEST
-	tristate "KUnit test for Cirrus Logic cs-amp-lib"
-	depends on KUNIT
+	tristate "KUnit test for Cirrus Logic cs-amp-lib" if !KUNIT_ALL_TESTS
+	depends on SND_SOC_CS_AMP_LIB && KUNIT
 	default KUNIT_ALL_TESTS
-	select SND_SOC_CS_AMP_LIB
 	help
 	  This builds KUnit tests for the Cirrus Logic common
 	  amplifier library.
-- 
2.39.5

[PATCH 6.14 051/183] firmware: cs_dsp: tests: Depend on FW_CS_DSP rather then enabling it

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Nico Pache <npache@redhat.com>

[ Upstream commit a0b887f6eb9a0d1be3c57d00b0f3ba8408d3018a ]

FW_CS_DSP gets enabled if KUNIT is enabled. The test should rather
depend on if the feature is enabled. Fix this by moving FW_CS_DSP to the
depends on clause.

Fixes: dd0b6b1f29b9 ("firmware: cs_dsp: Add KUnit testing of bin file download")
Signed-off-by: Nico Pache <npache@redhat.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20250411123608.1676462-4-rf@opensource.cirrus.com
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/firmware/cirrus/Kconfig | 5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

diff --git a/drivers/firmware/cirrus/Kconfig b/drivers/firmware/cirrus/Kconfig
index 0a883091259a2..e3c2e38b746df 100644
--- a/drivers/firmware/cirrus/Kconfig
+++ b/drivers/firmware/cirrus/Kconfig
@@ -6,14 +6,11 @@ config FW_CS_DSP
 
 config FW_CS_DSP_KUNIT_TEST_UTILS
 	tristate
-	depends on KUNIT && REGMAP
-	select FW_CS_DSP
 
 config FW_CS_DSP_KUNIT_TEST
 	tristate "KUnit tests for Cirrus Logic cs_dsp" if !KUNIT_ALL_TESTS
-	depends on KUNIT && REGMAP
+	depends on KUNIT && REGMAP && FW_CS_DSP
 	default KUNIT_ALL_TESTS
-	select FW_CS_DSP
 	select FW_CS_DSP_KUNIT_TEST_UTILS
 	help
 	  This builds KUnit tests for cs_dsp.
-- 
2.39.5

[PATCH 6.14 052/183] ASoC: soc-pcm: Fix hw_params() and DAPM widget sequence

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sheetal <sheetal@nvidia.com>

[ Upstream commit 9aff2e8df240e84a36f2607f98a0a9924a24e65d ]

Issue:
 When multiple audio streams share a common BE DAI, the BE DAI
 widget can be powered up before its hardware parameters are configured.
 This incorrect sequence leads to intermittent pcm_write errors.

 For example, the below Tegra use-case throws an error:
  aplay(2 streams) -> AMX(mux) -> ADX(demux) -> arecord(2 streams),
  here, 'AMX TX' and 'ADX RX' are common BE DAIs.

For above usecase when failure happens below sequence is observed:
 aplay(1) FE open()
  - BE DAI callbacks added to the list
  - BE DAI state = SND_SOC_DPCM_STATE_OPEN
 aplay(2) FE open()
  - BE DAI callbacks are not added to the list as the state is
    already SND_SOC_DPCM_STATE_OPEN during aplay(1) FE open().
 aplay(2) FE hw_params()
  - BE DAI hw_params() callback ignored
 aplay(2) FE prepare()
  - Widget is powered ON without BE DAI hw_params() call
 aplay(1) FE hw_params()
  - BE DAI hw_params() is now called

Fix:
 Add BE DAIs in the list if its state is either SND_SOC_DPCM_STATE_OPEN
 or SND_SOC_DPCM_STATE_HW_PARAMS as well.

It ensures the widget is powered ON after BE DAI hw_params() callback.

Fixes: 0c25db3f7621 ("ASoC: soc-pcm: Don't reconnect an already active BE")
Signed-off-by: Sheetal <sheetal@nvidia.com>
Link: https://patch.msgid.link/20250404105953.2784819-1-sheetal@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/soc-pcm.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/sound/soc/soc-pcm.c b/sound/soc/soc-pcm.c
index 88b3ad5a25520..53b0ea68b939f 100644
--- a/sound/soc/soc-pcm.c
+++ b/sound/soc/soc-pcm.c
@@ -1618,10 +1618,13 @@ static int dpcm_add_paths(struct snd_soc_pcm_runtime *fe, int stream,
 		/*
 		 * Filter for systems with 'component_chaining' enabled.
 		 * This helps to avoid unnecessary re-configuration of an
-		 * already active BE on such systems.
+		 * already active BE on such systems and ensures the BE DAI
+		 * widget is powered ON after hw_params() BE DAI callback.
 		 */
 		if (fe->card->component_chaining &&
 		    (be->dpcm[stream].state != SND_SOC_DPCM_STATE_NEW) &&
+		    (be->dpcm[stream].state != SND_SOC_DPCM_STATE_OPEN) &&
+		    (be->dpcm[stream].state != SND_SOC_DPCM_STATE_HW_PARAMS) &&
 		    (be->dpcm[stream].state != SND_SOC_DPCM_STATE_CLOSE))
 			continue;
 
-- 
2.39.5

[PATCH 6.14 053/183] book3s64/radix : Align section vmemmap start address to PAGE_SIZE

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Donet Tom <donettom@linux.ibm.com>

[ Upstream commit 9cf7e13fecbab0894f6986fc6986ab2eba8de52e ]

A vmemmap altmap is a device-provided region used to provide
backing storage for struct pages. For each namespace, the altmap
should belong to that same namespace. If the namespaces are
created unaligned, there is a chance that the section vmemmap
start address could also be unaligned. If the section vmemmap
start address is unaligned, the altmap page allocated from the
current namespace might be used by the previous namespace also.
During the free operation, since the altmap is shared between two
namespaces, the previous namespace may detect that the page does
not belong to its altmap and incorrectly assume that the page is a
normal page. It then attempts to free the normal page, which leads
to a kernel crash.

Kernel attempted to read user page (18) - exploit attempt? (uid: 0)
BUG: Kernel NULL pointer dereference on read at 0x00000018
Faulting instruction address: 0xc000000000530c7c
Oops: Kernel access of bad area, sig: 11 [#1]
LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA pSeries
CPU: 32 PID: 2104 Comm: ndctl Kdump: loaded Tainted: G        W
NIP:  c000000000530c7c LR: c000000000530e00 CTR: 0000000000007ffe
REGS: c000000015e57040 TRAP: 0300   Tainted: G        W
MSR:  800000000280b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE>  CR: 84482404
CFAR: c000000000530dfc DAR: 0000000000000018 DSISR: 40000000 IRQMASK: 0
GPR00: c000000000530e00 c000000015e572e0 c000000002c5cb00 c00c000101008040
GPR04: 0000000000000000 0000000000000007 0000000000000001 000000000000001f
GPR08: 0000000000000005 0000000000000000 0000000000000018 0000000000002000
GPR12: c0000000001d2fb0 c0000060de6b0080 0000000000000000 c0000060dbf90020
GPR16: c00c000101008000 0000000000000001 0000000000000000 c000000125b20f00
GPR20: 0000000000000001 0000000000000000 ffffffffffffffff c00c000101007fff
GPR24: 0000000000000001 0000000000000000 0000000000000000 0000000000000000
GPR28: 0000000004040201 0000000000000001 0000000000000000 c00c000101008040
NIP [c000000000530c7c] get_pfnblock_flags_mask+0x7c/0xd0
LR [c000000000530e00] free_unref_page_prepare+0x130/0x4f0
Call Trace:
free_unref_page+0x50/0x1e0
free_reserved_page+0x40/0x68
free_vmemmap_pages+0x98/0xe0
remove_pte_table+0x164/0x1e8
remove_pmd_table+0x204/0x2c8
remove_pud_table+0x1c4/0x288
remove_pagetable+0x1c8/0x310
vmemmap_free+0x24/0x50
section_deactivate+0x28c/0x2a0
__remove_pages+0x84/0x110
arch_remove_memory+0x38/0x60
memunmap_pages+0x18c/0x3d0
devm_action_release+0x30/0x50
release_nodes+0x68/0x140
devres_release_group+0x100/0x190
dax_pmem_compat_release+0x44/0x80 [dax_pmem_compat]
device_for_each_child+0x8c/0x100
[dax_pmem_compat_remove+0x2c/0x50 [dax_pmem_compat]
nvdimm_bus_remove+0x78/0x140 [libnvdimm]
device_remove+0x70/0xd0

Another issue is that if there is no altmap, a PMD-sized vmemmap
page will be allocated from RAM, regardless of the alignment of
the section start address. If the section start address is not
aligned to the PMD size, a VM_BUG_ON will be triggered when
setting the PMD-sized page to page table.

In this patch, we are aligning the section vmemmap start address
to PAGE_SIZE. After alignment, the start address will not be
part of the current namespace, and a normal page will be allocated
for the vmemmap mapping of the current section. For the remaining
sections, altmaps will be allocated. During the free operation,
the normal page will be correctly freed.

In the same way, a PMD_SIZE vmemmap page will be allocated only if
the section start address is PMD_SIZE-aligned; otherwise, it will
fall back to a PAGE-sized vmemmap allocation.

Without this patch
==================
NS1 start               NS2 start
 _________________________________________________________
|         NS1               |            NS2              |
 ---------------------------------------------------------
| Altmap| Altmap | .....|Altmap| Altmap | ...........
|  NS1  |  NS1   |      | NS2  |  NS2   |

In the above scenario, NS1 and NS2 are two namespaces. The vmemmap
for NS1 comes from Altmap NS1, which belongs to NS1, and the
vmemmap for NS2 comes from Altmap NS2, which belongs to NS2.

The vmemmap start for NS2 is not aligned, so Altmap NS2 is shared
by both NS1 and NS2. During the free operation in NS1, Altmap NS2
is not part of NS1's altmap, causing it to attempt to free an
invalid page.

With this patch
===============
NS1 start               NS2 start
 _________________________________________________________
|         NS1               |            NS2              |
 ---------------------------------------------------------
| Altmap| Altmap | .....| Normal | Altmap | Altmap |.......
|  NS1  |  NS1   |      |  Page  |  NS2   |  NS2   |

If the vmemmap start for NS2 is not aligned then we are allocating
a normal page. NS1 and NS2 vmemmap will be freed correctly.

Fixes: 368a0590d954 ("powerpc/book3s64/vmemmap: switch radix to use a different vmemmap handling function")
Co-developed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Donet Tom <donettom@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/8f98ec2b442977c618f7256cec88eb17dde3f2b9.1741609795.git.donettom@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/mm/book3s64/radix_pgtable.c | 17 +++++++++++++++--
 1 file changed, 15 insertions(+), 2 deletions(-)

diff --git a/arch/powerpc/mm/book3s64/radix_pgtable.c b/arch/powerpc/mm/book3s64/radix_pgtable.c
index 311e2112d782e..128c011afc481 100644
--- a/arch/powerpc/mm/book3s64/radix_pgtable.c
+++ b/arch/powerpc/mm/book3s64/radix_pgtable.c
@@ -1120,6 +1120,19 @@ int __meminit radix__vmemmap_populate(unsigned long start, unsigned long end, in
 	pmd_t *pmd;
 	pte_t *pte;
 
+	/*
+	 * Make sure we align the start vmemmap addr so that we calculate
+	 * the correct start_pfn in altmap boundary check to decided whether
+	 * we should use altmap or RAM based backing memory allocation. Also
+	 * the address need to be aligned for set_pte operation.
+
+	 * If the start addr is already PMD_SIZE aligned we will try to use
+	 * a pmd mapping. We don't want to be too aggressive here beacause
+	 * that will cause more allocations in RAM. So only if the namespace
+	 * vmemmap start addr is PMD_SIZE aligned we will use PMD mapping.
+	 */
+
+	start = ALIGN_DOWN(start, PAGE_SIZE);
 	for (addr = start; addr < end; addr = next) {
 		next = pmd_addr_end(addr, end);
 
@@ -1145,8 +1158,8 @@ int __meminit radix__vmemmap_populate(unsigned long start, unsigned long end, in
 			 * in altmap block allocation failures, in which case
 			 * we fallback to RAM for vmemmap allocation.
 			 */
-			if (altmap && (!IS_ALIGNED(addr, PMD_SIZE) ||
-				       altmap_cross_boundary(altmap, addr, PMD_SIZE))) {
+			if (!IS_ALIGNED(addr, PMD_SIZE) || (altmap &&
+			    altmap_cross_boundary(altmap, addr, PMD_SIZE))) {
 				/*
 				 * make sure we don't create altmap mappings
 				 * covering things outside the device.
-- 
2.39.5

[PATCH 6.14 054/183] powerpc64/ftrace: fix module loading without patchable function entries

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Anthony Iliopoulos <ailiop@suse.com>

[ Upstream commit 534f5a8ba27863141e29766467a3e1f61bcb47ac ]

get_stubs_size assumes that there must always be at least one patchable
function entry, which is not always the case (modules that export data
but no code), otherwise it returns -ENOEXEC and thus the section header
sh_size is set to that value. During module_memory_alloc() the size is
passed to execmem_alloc() after being page-aligned and thus set to zero
which will cause it to fail the allocation (and thus module loading) as
__vmalloc_node_range() checks for zero-sized allocs and returns null:

[  115.466896] module_64: cast_common: doesn't contain __patchable_function_entries.
[  115.469189] ------------[ cut here ]------------
[  115.469496] WARNING: CPU: 0 PID: 274 at mm/vmalloc.c:3778 __vmalloc_node_range_noprof+0x8b4/0x8f0
...
[  115.478574] ---[ end trace 0000000000000000 ]---
[  115.479545] execmem: unable to allocate memory

Fix this by removing the check completely, since it is anyway not
helpful to propagate this as an error upwards.

Fixes: eec37961a56a ("powerpc64/ftrace: Move ftrace sequence out of line")
Signed-off-by: Anthony Iliopoulos <ailiop@suse.com>
Acked-by: Naveen N Rao (AMD) <naveen@kernel.org>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250204231821.39140-1-ailiop@suse.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/kernel/module_64.c | 4 ----
 1 file changed, 4 deletions(-)

diff --git a/arch/powerpc/kernel/module_64.c b/arch/powerpc/kernel/module_64.c
index 34a5aec4908fb..126bf3b06ab7e 100644
--- a/arch/powerpc/kernel/module_64.c
+++ b/arch/powerpc/kernel/module_64.c
@@ -258,10 +258,6 @@ static unsigned long get_stubs_size(const Elf64_Ehdr *hdr,
 			break;
 		}
 	}
-	if (i == hdr->e_shnum) {
-		pr_err("%s: doesn't contain __patchable_function_entries.\n", me->name);
-		return -ENOEXEC;
-	}
 #endif
 
 	pr_debug("Looks like a total of %lu stubs, max\n", relocs);
-- 
2.39.5

[PATCH 6.14 055/183] pinctrl: imx: Return NULL if no group is matched and found

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hui Wang <hui.wang@canonical.com>

[ Upstream commit e64c0ff0d5d85791fbcd126ee558100a06a24a97 ]

Currently if no group is matched and found, this function will return
the last grp to the caller, this is not expected, it is supposed to
return NULL in this case.

Fixes: e566fc11ea76 ("pinctrl: imx: use generic pinctrl helpers for managing groups")
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/20250327031600.99723-1-hui.wang@canonical.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pinctrl/freescale/pinctrl-imx.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/pinctrl/freescale/pinctrl-imx.c b/drivers/pinctrl/freescale/pinctrl-imx.c
index 842a1e6cbfc41..18de313285404 100644
--- a/drivers/pinctrl/freescale/pinctrl-imx.c
+++ b/drivers/pinctrl/freescale/pinctrl-imx.c
@@ -37,16 +37,16 @@ static inline const struct group_desc *imx_pinctrl_find_group_by_name(
 				struct pinctrl_dev *pctldev,
 				const char *name)
 {
-	const struct group_desc *grp = NULL;
+	const struct group_desc *grp;
 	int i;
 
 	for (i = 0; i < pctldev->num_groups; i++) {
 		grp = pinctrl_generic_get_group(pctldev, i);
 		if (grp && !strcmp(grp->grp.name, name))
-			break;
+			return grp;
 	}
 
-	return grp;
+	return NULL;
 }
 
 static void imx_pin_dbg_show(struct pinctrl_dev *pctldev, struct seq_file *s,
-- 
2.39.5

[PATCH 6.14 056/183] powerpc/boot: Check for ld-option support

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Madhavan Srinivasan <maddy@linux.ibm.com>

[ Upstream commit b2accfe7ca5bc9f9af28e603b79bdd5ad8df5c0b ]

Commit 579aee9fc594 ("powerpc: suppress some linker warnings in recent linker versions")
enabled support to add linker option "--no-warn-rwx-segments",
if the version is greater than 2.39. Similar build warning were
reported recently from linker version 2.35.2.

ld: warning: arch/powerpc/boot/zImage.epapr has a LOAD segment with RWX permissions
ld: warning: arch/powerpc/boot/zImage.pseries has a LOAD segment with RWX permissions

Fix the warning by checking for "--no-warn-rwx-segments"
option support in linker to enable it, instead of checking
for the version range.

Fixes: 579aee9fc594 ("powerpc: suppress some linker warnings in recent linker versions")
Reported-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Suggested-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Closes: https://lore.kernel.org/linuxppc-dev/61cf556c-4947-4bd6-af63-892fc0966dad@linux.ibm.com/
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250401004218.24869-1-maddy@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/boot/wrapper | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/arch/powerpc/boot/wrapper b/arch/powerpc/boot/wrapper
index 1db60fe13802d..267ca6d4d9b38 100755
--- a/arch/powerpc/boot/wrapper
+++ b/arch/powerpc/boot/wrapper
@@ -234,10 +234,8 @@ fi
 
 # suppress some warnings in recent ld versions
 nowarn="-z noexecstack"
-if ! ld_is_lld; then
-	if [ "$LD_VERSION" -ge "$(echo 2.39 | ld_version)" ]; then
-		nowarn="$nowarn --no-warn-rwx-segments"
-	fi
+if [ $(${CROSS}ld -v --no-warn-rwx-segments &>/dev/null; echo $?) -eq 0 ]; then
+	nowarn="$nowarn --no-warn-rwx-segments"
 fi
 
 platformo=$object/"$platform".o
-- 
2.39.5

[PATCH 6.14 057/183] ASoC: Intel: sof_sdw: Add NULL check in asoc_sdw_rt_dmic_rtd_init()

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Chenyuan Yang <chenyuan0y@gmail.com>

[ Upstream commit 68715cb5c0e00284d93f976c6368809f64131b0b ]

mic_name returned by devm_kasprintf() could be NULL.
Add a check for it.

Signed-off-by: Chenyuan Yang <chenyuan0y@gmail.com>
Fixes: bee2fe44679f ("ASoC: Intel: sof_sdw: use generic rtd_init function for Realtek SDW DMICs")
Link: https://patch.msgid.link/20250415194134.292830-1-chenyuan0y@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/sdw_utils/soc_sdw_rt_dmic.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/sound/soc/sdw_utils/soc_sdw_rt_dmic.c b/sound/soc/sdw_utils/soc_sdw_rt_dmic.c
index 46d917a99c51d..97be110a59b63 100644
--- a/sound/soc/sdw_utils/soc_sdw_rt_dmic.c
+++ b/sound/soc/sdw_utils/soc_sdw_rt_dmic.c
@@ -29,6 +29,8 @@ int asoc_sdw_rt_dmic_rtd_init(struct snd_soc_pcm_runtime *rtd, struct snd_soc_da
 		mic_name = devm_kasprintf(card->dev, GFP_KERNEL, "rt715-sdca");
 	else
 		mic_name = devm_kasprintf(card->dev, GFP_KERNEL, "%s", component->name_prefix);
+	if (!mic_name)
+		return -ENOMEM;
 
 	card->components = devm_kasprintf(card->dev, GFP_KERNEL,
 					  "%s mic:%s", card->components,
-- 
2.39.5

[PATCH 6.14 058/183] iommu/arm-smmu-v3: Add missing S2FWB feature detection

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Aneesh Kumar K.V (Arm) <aneesh.kumar@kernel.org>

[ Upstream commit 45e00e36718902d81bdaebb37b3a8244e685bc48 ]

Commit 67e4fe398513 ("iommu/arm-smmu-v3: Use S2FWB for NESTED domains")
introduced S2FWB usage but omitted the corresponding feature detection.
As a result, vIOMMU allocation fails on FVP in arm_vsmmu_alloc(), due to
the following check:

	if (!arm_smmu_master_canwbs(master) &&
	    !(smmu->features & ARM_SMMU_FEAT_S2FWB))
		return ERR_PTR(-EOPNOTSUPP);

This patch adds the missing detection logic to prevent allocation
failure when S2FWB is supported.

Fixes: 67e4fe398513 ("iommu/arm-smmu-v3: Use S2FWB for NESTED domains")
Signed-off-by: Aneesh Kumar K.V (Arm) <aneesh.kumar@kernel.org>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Pranjal Shrivastava <praan@google.com>
Link: https://lore.kernel.org/r/20250408033351.1012411-1-aneesh.kumar@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c
index ae803c64ae1ee..e495334d1c43a 100644
--- a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c
+++ b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c
@@ -4416,6 +4416,8 @@ static int arm_smmu_device_hw_probe(struct arm_smmu_device *smmu)
 	reg = readl_relaxed(smmu->base + ARM_SMMU_IDR3);
 	if (FIELD_GET(IDR3_RIL, reg))
 		smmu->features |= ARM_SMMU_FEAT_RANGE_INV;
+	if (FIELD_GET(IDR3_FWB, reg))
+		smmu->features |= ARM_SMMU_FEAT_S2FWB;
 
 	/* IDR5 */
 	reg = readl_relaxed(smmu->base + ARM_SMMU_IDR5);
-- 
2.39.5

[PATCH 6.14 059/183] ALSA: hda/realtek - Enable speaker for HP platform

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Kailang Yang <kailang@realtek.com>

[ Upstream commit 494d0939b1bda4d4ddca7d52a6ce6f808ff2c9a5 ]

The speaker doesn't mute when plugged headphone.
This platform support 4ch speakers.
The speaker pin 0x14 wasn't fill verb table.
After assigned model ALC245_FIXUP_HP_SPECTRE_X360_EU0XXX.
The speaker can mute when headphone was plugged.

Fixes: aa8e3ef4fe53 ("ALSA: hda/realtek: Add quirks for various HP ENVY models")
Signed-off-by: Kailang Yang <kailang@realtek.com>
Link: https://lore.kernel.org/eb4c14a4d85740069c909e756bbacb0e@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/pci/hda/patch_realtek.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index 35c1128ea6b67..263c7be1d4e29 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -440,6 +440,10 @@ static void alc_fill_eapd_coef(struct hda_codec *codec)
 		alc_update_coef_idx(codec, 0x67, 0xf000, 0x3000);
 		fallthrough;
 	case 0x10ec0215:
+	case 0x10ec0236:
+	case 0x10ec0245:
+	case 0x10ec0256:
+	case 0x10ec0257:
 	case 0x10ec0285:
 	case 0x10ec0289:
 		alc_update_coef_idx(codec, 0x36, 1<<13, 0);
@@ -447,12 +451,8 @@ static void alc_fill_eapd_coef(struct hda_codec *codec)
 	case 0x10ec0230:
 	case 0x10ec0233:
 	case 0x10ec0235:
-	case 0x10ec0236:
-	case 0x10ec0245:
 	case 0x10ec0255:
-	case 0x10ec0256:
 	case 0x19e58326:
-	case 0x10ec0257:
 	case 0x10ec0282:
 	case 0x10ec0283:
 	case 0x10ec0286:
@@ -10713,8 +10713,8 @@ static const struct hda_quirk alc269_fixup_tbl[] = {
 	SND_PCI_QUIRK(0x103c, 0x8ca7, "HP ZBook Fury", ALC245_FIXUP_CS35L41_SPI_2_HP_GPIO_LED),
 	SND_PCI_QUIRK(0x103c, 0x8caf, "HP Elite mt645 G8 Mobile Thin Client", ALC236_FIXUP_HP_MUTE_LED_MICMUTE_VREF),
 	SND_PCI_QUIRK(0x103c, 0x8cbd, "HP Pavilion Aero Laptop 13-bg0xxx", ALC245_FIXUP_HP_X360_MUTE_LEDS),
-	SND_PCI_QUIRK(0x103c, 0x8cdd, "HP Spectre", ALC287_FIXUP_CS35L41_I2C_2),
-	SND_PCI_QUIRK(0x103c, 0x8cde, "HP Spectre", ALC287_FIXUP_CS35L41_I2C_2),
+	SND_PCI_QUIRK(0x103c, 0x8cdd, "HP Spectre", ALC245_FIXUP_HP_SPECTRE_X360_EU0XXX),
+	SND_PCI_QUIRK(0x103c, 0x8cde, "HP OmniBook Ultra Flip Laptop 14t", ALC245_FIXUP_HP_SPECTRE_X360_EU0XXX),
 	SND_PCI_QUIRK(0x103c, 0x8cdf, "HP SnowWhite", ALC287_FIXUP_CS35L41_I2C_2_HP_GPIO_LED),
 	SND_PCI_QUIRK(0x103c, 0x8ce0, "HP SnowWhite", ALC287_FIXUP_CS35L41_I2C_2_HP_GPIO_LED),
 	SND_PCI_QUIRK(0x103c, 0x8cf5, "HP ZBook Studio 16", ALC245_FIXUP_CS35L41_SPI_4_HP_GPIO_LED),
-- 
2.39.5

[PATCH 6.14 060/183] drm/i915/pxp: fix undefined reference to `intel_pxp_gsccs_is_ready_for_sessions

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Chen Linxuan <chenlinxuan@uniontech.com>

[ Upstream commit 7e21ea8149a0e41c3666ee52cc063a6f797a7a2a ]

On x86_64 with gcc version 13.3.0, I compile kernel with:

  make defconfig
  ./scripts/kconfig/merge_config.sh .config <(
    echo CONFIG_COMPILE_TEST=y
  )
  make KCFLAGS="-fno-inline-functions -fno-inline-small-functions -fno-inline-functions-called-once"

Then I get a linker error:

  ld: vmlinux.o: in function `pxp_fw_dependencies_completed':
  kintel_pxp.c:(.text+0x95728f): undefined reference to `intel_pxp_gsccs_is_ready_for_sessions'

This is caused by not having a intel_pxp_gsccs_is_ready_for_sessions()
header stub for CONFIG_DRM_I915_PXP=n. Add it.

Signed-off-by: Chen Linxuan <chenlinxuan@uniontech.com>
Fixes: 99afb7cc8c44 ("drm/i915/pxp: Add ARB session creation and cleanup")
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/20250415090616.2649889-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit b484c1e225a6a582fc78c4d7af7b286408bb7d41)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/i915/pxp/intel_pxp_gsccs.h | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/i915/pxp/intel_pxp_gsccs.h b/drivers/gpu/drm/i915/pxp/intel_pxp_gsccs.h
index 9aae779c4da31..4969d3de2bac3 100644
--- a/drivers/gpu/drm/i915/pxp/intel_pxp_gsccs.h
+++ b/drivers/gpu/drm/i915/pxp/intel_pxp_gsccs.h
@@ -23,6 +23,7 @@ int intel_pxp_gsccs_init(struct intel_pxp *pxp);
 
 int intel_pxp_gsccs_create_session(struct intel_pxp *pxp, int arb_session_id);
 void intel_pxp_gsccs_end_arb_fw_session(struct intel_pxp *pxp, u32 arb_session_id);
+bool intel_pxp_gsccs_is_ready_for_sessions(struct intel_pxp *pxp);
 
 #else
 static inline void intel_pxp_gsccs_fini(struct intel_pxp *pxp)
@@ -34,8 +35,11 @@ static inline int intel_pxp_gsccs_init(struct intel_pxp *pxp)
 	return 0;
 }
 
-#endif
+static inline bool intel_pxp_gsccs_is_ready_for_sessions(struct intel_pxp *pxp)
+{
+	return false;
+}
 
-bool intel_pxp_gsccs_is_ready_for_sessions(struct intel_pxp *pxp);
+#endif
 
 #endif /*__INTEL_PXP_GSCCS_H__ */
-- 
2.39.5

[PATCH 6.14 061/183] wifi: iwlwifi: back off on continuous errors

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Johannes Berg <johannes.berg@intel.com>

[ Upstream commit d49437a6afc707951e5767ef70c9726b6c05da08 ]

When errors occur repeatedly, the driver shouldn't go into a
tight loop trying to reset the device. Implement the backoff
I had already defined IWL_TRANS_RESET_DELAY for, but clearly
forgotten the implementation of.

Fixes: 9a2f13c40c63 ("wifi: iwlwifi: implement reset escalation")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250420095642.8816e299efa2.I82cde34e2345a2b33b1f03dbb040f5ad3439a5aa@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/wireless/intel/iwlwifi/iwl-trans.c    | 27 ++++++++++++++-----
 .../net/wireless/intel/iwlwifi/iwl-trans.h    |  7 +++--
 .../net/wireless/intel/iwlwifi/pcie/trans.c   |  3 ++-
 3 files changed, 28 insertions(+), 9 deletions(-)

diff --git a/drivers/net/wireless/intel/iwlwifi/iwl-trans.c b/drivers/net/wireless/intel/iwlwifi/iwl-trans.c
index 47854a36413e1..8ad2bd64dbd3d 100644
--- a/drivers/net/wireless/intel/iwlwifi/iwl-trans.c
+++ b/drivers/net/wireless/intel/iwlwifi/iwl-trans.c
@@ -21,6 +21,7 @@ struct iwl_trans_dev_restart_data {
 	struct list_head list;
 	unsigned int restart_count;
 	time64_t last_error;
+	bool backoff;
 	char name[];
 };
 
@@ -125,13 +126,20 @@ iwl_trans_determine_restart_mode(struct iwl_trans *trans)
 	if (!data)
 		return at_least;
 
-	if (ktime_get_boottime_seconds() - data->last_error >=
+	if (!data->backoff &&
+	    ktime_get_boottime_seconds() - data->last_error >=
 			IWL_TRANS_RESET_OK_TIME)
 		data->restart_count = 0;
 
 	index = data->restart_count;
-	if (index >= ARRAY_SIZE(escalation_list))
+	if (index >= ARRAY_SIZE(escalation_list)) {
 		index = ARRAY_SIZE(escalation_list) - 1;
+		if (!data->backoff) {
+			data->backoff = true;
+			return IWL_RESET_MODE_BACKOFF;
+		}
+		data->backoff = false;
+	}
 
 	return max(at_least, escalation_list[index]);
 }
@@ -140,7 +148,8 @@ iwl_trans_determine_restart_mode(struct iwl_trans *trans)
 
 static void iwl_trans_restart_wk(struct work_struct *wk)
 {
-	struct iwl_trans *trans = container_of(wk, typeof(*trans), restart.wk);
+	struct iwl_trans *trans = container_of(wk, typeof(*trans),
+					       restart.wk.work);
 	struct iwl_trans_reprobe *reprobe;
 	enum iwl_reset_mode mode;
 
@@ -168,6 +177,12 @@ static void iwl_trans_restart_wk(struct work_struct *wk)
 		return;
 
 	mode = iwl_trans_determine_restart_mode(trans);
+	if (mode == IWL_RESET_MODE_BACKOFF) {
+		IWL_ERR(trans, "Too many device errors - delay next reset\n");
+		queue_delayed_work(system_unbound_wq, &trans->restart.wk,
+				   IWL_TRANS_RESET_DELAY);
+		return;
+	}
 
 	iwl_trans_inc_restart_count(trans->dev);
 
@@ -227,7 +242,7 @@ struct iwl_trans *iwl_trans_alloc(unsigned int priv_size,
 	trans->dev = dev;
 	trans->num_rx_queues = 1;
 
-	INIT_WORK(&trans->restart.wk, iwl_trans_restart_wk);
+	INIT_DELAYED_WORK(&trans->restart.wk, iwl_trans_restart_wk);
 
 	return trans;
 }
@@ -271,7 +286,7 @@ int iwl_trans_init(struct iwl_trans *trans)
 
 void iwl_trans_free(struct iwl_trans *trans)
 {
-	cancel_work_sync(&trans->restart.wk);
+	cancel_delayed_work_sync(&trans->restart.wk);
 	kmem_cache_destroy(trans->dev_cmd_pool);
 }
 
@@ -403,7 +418,7 @@ void iwl_trans_op_mode_leave(struct iwl_trans *trans)
 
 	iwl_trans_pcie_op_mode_leave(trans);
 
-	cancel_work_sync(&trans->restart.wk);
+	cancel_delayed_work_sync(&trans->restart.wk);
 
 	trans->op_mode = NULL;
 
diff --git a/drivers/net/wireless/intel/iwlwifi/iwl-trans.h b/drivers/net/wireless/intel/iwlwifi/iwl-trans.h
index f6234065dbdde..9c64e1fd4c096 100644
--- a/drivers/net/wireless/intel/iwlwifi/iwl-trans.h
+++ b/drivers/net/wireless/intel/iwlwifi/iwl-trans.h
@@ -958,7 +958,7 @@ struct iwl_trans {
 	struct iwl_dma_ptr invalid_tx_cmd;
 
 	struct {
-		struct work_struct wk;
+		struct delayed_work wk;
 		struct iwl_fw_error_dump_mode mode;
 		bool during_reset;
 	} restart;
@@ -1159,7 +1159,7 @@ static inline void iwl_trans_schedule_reset(struct iwl_trans *trans,
 	 */
 	trans->restart.during_reset = test_bit(STATUS_IN_SW_RESET,
 					       &trans->status);
-	queue_work(system_unbound_wq, &trans->restart.wk);
+	queue_delayed_work(system_unbound_wq, &trans->restart.wk, 0);
 }
 
 static inline void iwl_trans_fw_error(struct iwl_trans *trans,
@@ -1258,6 +1258,9 @@ enum iwl_reset_mode {
 	IWL_RESET_MODE_RESCAN,
 	IWL_RESET_MODE_FUNC_RESET,
 	IWL_RESET_MODE_PROD_RESET,
+
+	/* keep last - special backoff value */
+	IWL_RESET_MODE_BACKOFF,
 };
 
 void iwl_trans_pcie_reset(struct iwl_trans *trans, enum iwl_reset_mode mode);
diff --git a/drivers/net/wireless/intel/iwlwifi/pcie/trans.c b/drivers/net/wireless/intel/iwlwifi/pcie/trans.c
index c917ed4c19bcc..b1ccace7377fb 100644
--- a/drivers/net/wireless/intel/iwlwifi/pcie/trans.c
+++ b/drivers/net/wireless/intel/iwlwifi/pcie/trans.c
@@ -2351,7 +2351,8 @@ void iwl_trans_pcie_reset(struct iwl_trans *trans, enum iwl_reset_mode mode)
 	struct iwl_trans_pcie_removal *removal;
 	char _msg = 0, *msg = &_msg;
 
-	if (WARN_ON(mode < IWL_RESET_MODE_REMOVE_ONLY))
+	if (WARN_ON(mode < IWL_RESET_MODE_REMOVE_ONLY ||
+		    mode == IWL_RESET_MODE_BACKOFF))
 		return;
 
 	if (test_bit(STATUS_TRANS_DEAD, &trans->status))
-- 
2.39.5

[PATCH 6.14 062/183] wifi: iwlwifi: dont warn if the NIC is gone in resume

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

[ Upstream commit 15220a257319ffe3bf95796326dfe0aacdbeb1c4 ]

Some BIOSes decide to power gate the WLAN device during S3. Since
iwlwifi doesn't expect this, it gets very noisy reporting that the
device is no longer available. Wifi is still available because iwlwifi
recovers, but it spews scary prints in the log.

Fix that by failing gracefully.

Fixes: e8bb19c1d590 ("wifi: iwlwifi: support fast resume")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219597
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250420095642.d8d58146c829.I569ca15eaaa774d633038a749cc6ec7448419714@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/wireless/intel/iwlwifi/iwl-trans.c    |  1 -
 drivers/net/wireless/intel/iwlwifi/pcie/drv.c | 20 ++++++++++++++++---
 .../wireless/intel/iwlwifi/pcie/internal.h    |  9 +++++----
 .../net/wireless/intel/iwlwifi/pcie/trans.c   | 13 +++++++++---
 drivers/net/wireless/intel/iwlwifi/pcie/tx.c  |  2 +-
 5 files changed, 33 insertions(+), 12 deletions(-)

diff --git a/drivers/net/wireless/intel/iwlwifi/iwl-trans.c b/drivers/net/wireless/intel/iwlwifi/iwl-trans.c
index 8ad2bd64dbd3d..ced8261c725f8 100644
--- a/drivers/net/wireless/intel/iwlwifi/iwl-trans.c
+++ b/drivers/net/wireless/intel/iwlwifi/iwl-trans.c
@@ -555,7 +555,6 @@ void __releases(nic_access)
 iwl_trans_release_nic_access(struct iwl_trans *trans)
 {
 	iwl_trans_pcie_release_nic_access(trans);
-	__release(nic_access);
 }
 IWL_EXPORT_SYMBOL(iwl_trans_release_nic_access);
 
diff --git a/drivers/net/wireless/intel/iwlwifi/pcie/drv.c b/drivers/net/wireless/intel/iwlwifi/pcie/drv.c
index e0b657b2f74b0..89a28e42975cb 100644
--- a/drivers/net/wireless/intel/iwlwifi/pcie/drv.c
+++ b/drivers/net/wireless/intel/iwlwifi/pcie/drv.c
@@ -1703,10 +1703,24 @@ static int _iwl_pci_resume(struct device *device, bool restore)
 	 * need to reset it completely.
 	 * Note: MAC (bits 0:7) will be cleared upon suspend even with wowlan,
 	 * so assume that any bits there mean that the device is usable.
+	 * For older devices, just try silently to grab the NIC.
 	 */
-	if (trans->trans_cfg->device_family >= IWL_DEVICE_FAMILY_BZ &&
-	    !iwl_read32(trans, CSR_FUNC_SCRATCH))
-		device_was_powered_off = true;
+	if (trans->trans_cfg->device_family >= IWL_DEVICE_FAMILY_BZ) {
+		if (!iwl_read32(trans, CSR_FUNC_SCRATCH))
+			device_was_powered_off = true;
+	} else {
+		/*
+		 * bh are re-enabled by iwl_trans_pcie_release_nic_access,
+		 * so re-enable them if _iwl_trans_pcie_grab_nic_access fails.
+		 */
+		local_bh_disable();
+		if (_iwl_trans_pcie_grab_nic_access(trans, true)) {
+			iwl_trans_pcie_release_nic_access(trans);
+		} else {
+			device_was_powered_off = true;
+			local_bh_enable();
+		}
+	}
 
 	if (restore || device_was_powered_off) {
 		trans->state = IWL_TRANS_NO_FW;
diff --git a/drivers/net/wireless/intel/iwlwifi/pcie/internal.h b/drivers/net/wireless/intel/iwlwifi/pcie/internal.h
index 45460f93d24ad..114a9195ad7f7 100644
--- a/drivers/net/wireless/intel/iwlwifi/pcie/internal.h
+++ b/drivers/net/wireless/intel/iwlwifi/pcie/internal.h
@@ -558,10 +558,10 @@ void iwl_trans_pcie_free(struct iwl_trans *trans);
 void iwl_trans_pcie_free_pnvm_dram_regions(struct iwl_dram_regions *dram_regions,
 					   struct device *dev);
 
-bool __iwl_trans_pcie_grab_nic_access(struct iwl_trans *trans);
-#define _iwl_trans_pcie_grab_nic_access(trans)			\
+bool __iwl_trans_pcie_grab_nic_access(struct iwl_trans *trans, bool silent);
+#define _iwl_trans_pcie_grab_nic_access(trans, silent)		\
 	__cond_lock(nic_access_nobh,				\
-		    likely(__iwl_trans_pcie_grab_nic_access(trans)))
+		    likely(__iwl_trans_pcie_grab_nic_access(trans, silent)))
 
 void iwl_trans_pcie_check_product_reset_status(struct pci_dev *pdev);
 void iwl_trans_pcie_check_product_reset_mode(struct pci_dev *pdev);
@@ -1105,7 +1105,8 @@ void iwl_trans_pcie_set_bits_mask(struct iwl_trans *trans, u32 reg,
 int iwl_trans_pcie_read_config32(struct iwl_trans *trans, u32 ofs,
 				 u32 *val);
 bool iwl_trans_pcie_grab_nic_access(struct iwl_trans *trans);
-void iwl_trans_pcie_release_nic_access(struct iwl_trans *trans);
+void __releases(nic_access_nobh)
+iwl_trans_pcie_release_nic_access(struct iwl_trans *trans);
 
 /* transport gen 1 exported functions */
 void iwl_trans_pcie_fw_alive(struct iwl_trans *trans, u32 scd_addr);
diff --git a/drivers/net/wireless/intel/iwlwifi/pcie/trans.c b/drivers/net/wireless/intel/iwlwifi/pcie/trans.c
index b1ccace7377fb..102a6123bba0e 100644
--- a/drivers/net/wireless/intel/iwlwifi/pcie/trans.c
+++ b/drivers/net/wireless/intel/iwlwifi/pcie/trans.c
@@ -2406,7 +2406,7 @@ EXPORT_SYMBOL(iwl_trans_pcie_reset);
  * This version doesn't disable BHs but rather assumes they're
  * already disabled.
  */
-bool __iwl_trans_pcie_grab_nic_access(struct iwl_trans *trans)
+bool __iwl_trans_pcie_grab_nic_access(struct iwl_trans *trans, bool silent)
 {
 	int ret;
 	struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans);
@@ -2458,6 +2458,11 @@ bool __iwl_trans_pcie_grab_nic_access(struct iwl_trans *trans)
 	if (unlikely(ret < 0)) {
 		u32 cntrl = iwl_read32(trans, CSR_GP_CNTRL);
 
+		if (silent) {
+			spin_unlock(&trans_pcie->reg_lock);
+			return false;
+		}
+
 		WARN_ONCE(1,
 			  "Timeout waiting for hardware access (CSR_GP_CNTRL 0x%08x)\n",
 			  cntrl);
@@ -2489,7 +2494,7 @@ bool iwl_trans_pcie_grab_nic_access(struct iwl_trans *trans)
 	bool ret;
 
 	local_bh_disable();
-	ret = __iwl_trans_pcie_grab_nic_access(trans);
+	ret = __iwl_trans_pcie_grab_nic_access(trans, false);
 	if (ret) {
 		/* keep BHs disabled until iwl_trans_pcie_release_nic_access */
 		return ret;
@@ -2498,7 +2503,8 @@ bool iwl_trans_pcie_grab_nic_access(struct iwl_trans *trans)
 	return false;
 }
 
-void iwl_trans_pcie_release_nic_access(struct iwl_trans *trans)
+void __releases(nic_access_nobh)
+iwl_trans_pcie_release_nic_access(struct iwl_trans *trans)
 {
 	struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans);
 
@@ -2525,6 +2531,7 @@ void iwl_trans_pcie_release_nic_access(struct iwl_trans *trans)
 	 * scheduled on different CPUs (after we drop reg_lock).
 	 */
 out:
+	__release(nic_access_nobh);
 	spin_unlock_bh(&trans_pcie->reg_lock);
 }
 
diff --git a/drivers/net/wireless/intel/iwlwifi/pcie/tx.c b/drivers/net/wireless/intel/iwlwifi/pcie/tx.c
index 7c1dd5cc084ac..83c6fcafcf1a4 100644
--- a/drivers/net/wireless/intel/iwlwifi/pcie/tx.c
+++ b/drivers/net/wireless/intel/iwlwifi/pcie/tx.c
@@ -1021,7 +1021,7 @@ static int iwl_pcie_set_cmd_in_flight(struct iwl_trans *trans,
 	 * returned. This needs to be done only on NICs that have
 	 * apmg_wake_up_wa set (see above.)
 	 */
-	if (!_iwl_trans_pcie_grab_nic_access(trans))
+	if (!_iwl_trans_pcie_grab_nic_access(trans, false))
 		return -EIO;
 
 	/*
-- 
2.39.5

[PATCH 6.14 063/183] wifi: iwlwifi: fix the check for the SCRATCH register upon resume

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

[ Upstream commit a17821321a9b42f26e77335cd525fee72dc1cd63 ]

We can't rely on the SCRATCH register being 0 on platform that power
gate the NIC in S3. Even in those platforms, the SCRATCH register is
still returning 0x1010000.

Make sure that we understand that those platforms have powered off the
device.

Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219597
Fixes: cb347bd29d0d ("wifi: iwlwifi: mvm: fix hibernation")
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250420095642.a7e082ee785c.I9418d76f860f54261cfa89e1f7ac10300904ba40@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/intel/iwlwifi/iwl-csr.h  | 1 +
 drivers/net/wireless/intel/iwlwifi/pcie/drv.c | 6 ++++--
 2 files changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/intel/iwlwifi/iwl-csr.h b/drivers/net/wireless/intel/iwlwifi/iwl-csr.h
index be9e464c9b7b0..3ff493e920d28 100644
--- a/drivers/net/wireless/intel/iwlwifi/iwl-csr.h
+++ b/drivers/net/wireless/intel/iwlwifi/iwl-csr.h
@@ -148,6 +148,7 @@
  * during a error FW error.
  */
 #define CSR_FUNC_SCRATCH_INIT_VALUE		(0x01010101)
+#define CSR_FUNC_SCRATCH_POWER_OFF_MASK		0xFFFF
 
 /* Bits for CSR_HW_IF_CONFIG_REG */
 #define CSR_HW_IF_CONFIG_REG_MSK_MAC_STEP_DASH	(0x0000000F)
diff --git a/drivers/net/wireless/intel/iwlwifi/pcie/drv.c b/drivers/net/wireless/intel/iwlwifi/pcie/drv.c
index 89a28e42975cb..d4c1bc20971fb 100644
--- a/drivers/net/wireless/intel/iwlwifi/pcie/drv.c
+++ b/drivers/net/wireless/intel/iwlwifi/pcie/drv.c
@@ -1702,11 +1702,13 @@ static int _iwl_pci_resume(struct device *device, bool restore)
 	 * Scratch value was altered, this means the device was powered off, we
 	 * need to reset it completely.
 	 * Note: MAC (bits 0:7) will be cleared upon suspend even with wowlan,
-	 * so assume that any bits there mean that the device is usable.
+	 * but not bits [15:8]. So if we have bits set in lower word, assume
+	 * the device is alive.
 	 * For older devices, just try silently to grab the NIC.
 	 */
 	if (trans->trans_cfg->device_family >= IWL_DEVICE_FAMILY_BZ) {
-		if (!iwl_read32(trans, CSR_FUNC_SCRATCH))
+		if (!(iwl_read32(trans, CSR_FUNC_SCRATCH) &
+		      CSR_FUNC_SCRATCH_POWER_OFF_MASK))
 			device_was_powered_off = true;
 	} else {
 		/*
-- 
2.39.5

[PATCH 6.14 064/183] wifi: plfxlc: Remove erroneous assert in plfxlc_mac_release

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Murad Masimov <m.masimov@mt-integration.ru>

[ Upstream commit 0fb15ae3b0a9221be01715dac0335647c79f3362 ]

plfxlc_mac_release() asserts that mac->lock is held. This assertion is
incorrect, because even if it was possible, it would not be the valid
behaviour. The function is used when probe fails or after the device is
disconnected. In both cases mac->lock can not be held as the driver is
not working with the device at the moment. All functions that use mac->lock
unlock it just after it was held. There is also no need to hold mac->lock
for plfxlc_mac_release() itself, as mac data is not affected, except for
mac->flags, which is modified atomically.

This bug leads to the following warning:
================================================================
WARNING: CPU: 0 PID: 127 at drivers/net/wireless/purelifi/plfxlc/mac.c:106 plfxlc_mac_release+0x7d/0xa0
Modules linked in:
CPU: 0 PID: 127 Comm: kworker/0:2 Not tainted 6.1.124-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024
Workqueue: usb_hub_wq hub_event
RIP: 0010:plfxlc_mac_release+0x7d/0xa0 drivers/net/wireless/purelifi/plfxlc/mac.c:106
Call Trace:
 <TASK>
 probe+0x941/0xbd0 drivers/net/wireless/purelifi/plfxlc/usb.c:694
 usb_probe_interface+0x5c0/0xaf0 drivers/usb/core/driver.c:396
 really_probe+0x2ab/0xcb0 drivers/base/dd.c:639
 __driver_probe_device+0x1a2/0x3d0 drivers/base/dd.c:785
 driver_probe_device+0x50/0x420 drivers/base/dd.c:815
 __device_attach_driver+0x2cf/0x510 drivers/base/dd.c:943
 bus_for_each_drv+0x183/0x200 drivers/base/bus.c:429
 __device_attach+0x359/0x570 drivers/base/dd.c:1015
 bus_probe_device+0xba/0x1e0 drivers/base/bus.c:489
 device_add+0xb48/0xfd0 drivers/base/core.c:3696
 usb_set_configuration+0x19dd/0x2020 drivers/usb/core/message.c:2165
 usb_generic_driver_probe+0x84/0x140 drivers/usb/core/generic.c:238
 usb_probe_device+0x130/0x260 drivers/usb/core/driver.c:293
 really_probe+0x2ab/0xcb0 drivers/base/dd.c:639
 __driver_probe_device+0x1a2/0x3d0 drivers/base/dd.c:785
 driver_probe_device+0x50/0x420 drivers/base/dd.c:815
 __device_attach_driver+0x2cf/0x510 drivers/base/dd.c:943
 bus_for_each_drv+0x183/0x200 drivers/base/bus.c:429
 __device_attach+0x359/0x570 drivers/base/dd.c:1015
 bus_probe_device+0xba/0x1e0 drivers/base/bus.c:489
 device_add+0xb48/0xfd0 drivers/base/core.c:3696
 usb_new_device+0xbdd/0x18f0 drivers/usb/core/hub.c:2620
 hub_port_connect drivers/usb/core/hub.c:5477 [inline]
 hub_port_connect_change drivers/usb/core/hub.c:5617 [inline]
 port_event drivers/usb/core/hub.c:5773 [inline]
 hub_event+0x2efe/0x5730 drivers/usb/core/hub.c:5855
 process_one_work+0x8a9/0x11d0 kernel/workqueue.c:2292
 worker_thread+0xa47/0x1200 kernel/workqueue.c:2439
 kthread+0x28d/0x320 kernel/kthread.c:376
 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295
 </TASK>
================================================================

Found by Linux Verification Center (linuxtesting.org) with Syzkaller.

Fixes: 68d57a07bfe5 ("wireless: add plfxlc driver for pureLiFi X, XL, XC devices")
Reported-by: syzbot+7d4f142f6c288de8abfe@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=7d4f142f6c288de8abfe
Signed-off-by: Murad Masimov <m.masimov@mt-integration.ru>
Link: https://patch.msgid.link/20250321185226.71-2-m.masimov@mt-integration.ru
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/purelifi/plfxlc/mac.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/net/wireless/purelifi/plfxlc/mac.c b/drivers/net/wireless/purelifi/plfxlc/mac.c
index eae93efa61504..82d1bf7edba20 100644
--- a/drivers/net/wireless/purelifi/plfxlc/mac.c
+++ b/drivers/net/wireless/purelifi/plfxlc/mac.c
@@ -102,7 +102,6 @@ int plfxlc_mac_init_hw(struct ieee80211_hw *hw)
 void plfxlc_mac_release(struct plfxlc_mac *mac)
 {
 	plfxlc_chip_release(&mac->chip);
-	lockdep_assert_held(&mac->lock);
 }
 
 int plfxlc_op_start(struct ieee80211_hw *hw)
-- 
2.39.5

[PATCH 6.14 065/183] powerpc/boot: Fix dash warning

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Madhavan Srinivasan <maddy@linux.ibm.com>

[ Upstream commit e3f506b78d921e48a00d005bea5c45ec36a99240 ]

'commit b2accfe7ca5b ("powerpc/boot: Check for ld-option support")' suppressed
linker warnings, but the expressed used did not go well with POSIX shell (dash)
resulting with this warning

arch/powerpc/boot/wrapper: 237: [: 0: unexpected operator
ld: warning: arch/powerpc/boot/zImage.epapr has a LOAD segment with RWX permissions

Fix the check to handle the reported warning. Patch also fixes
couple of shellcheck reported errors for the same line.

In arch/powerpc/boot/wrapper line 237:
if [ $(${CROSS}ld -v --no-warn-rwx-segments &>/dev/null; echo $?) -eq 0 ]; then
     ^-- SC2046 (warning): Quote this to prevent word splitting.
       ^------^ SC2086 (info): Double quote to prevent globbing and word splitting.
                                            ^---------^ SC3020 (warning): In POSIX sh, &> is undefined.

Fixes: b2accfe7ca5b ("powerpc/boot: Check for ld-option support")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Suggested-by: Stephen Rothwell <sfr@canb.auug.org.au>
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Reviewed-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250423082154.30625-1-maddy@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/boot/wrapper | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/powerpc/boot/wrapper b/arch/powerpc/boot/wrapper
index 267ca6d4d9b38..3d8dc822282ac 100755
--- a/arch/powerpc/boot/wrapper
+++ b/arch/powerpc/boot/wrapper
@@ -234,7 +234,7 @@ fi
 
 # suppress some warnings in recent ld versions
 nowarn="-z noexecstack"
-if [ $(${CROSS}ld -v --no-warn-rwx-segments &>/dev/null; echo $?) -eq 0 ]; then
+if "${CROSS}ld" -v --no-warn-rwx-segments >/dev/null 2>&1; then
 	nowarn="$nowarn --no-warn-rwx-segments"
 fi
 
-- 
2.39.5

[PATCH 6.14 066/183] vxlan: vnifilter: Fix unlocked deletion of default FDB entry

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ido Schimmel <idosch@nvidia.com>

[ Upstream commit 087a9eb9e5978e3ba362e1163691e41097e8ca20 ]

When a VNI is deleted from a VXLAN device in 'vnifilter' mode, the FDB
entry associated with the default remote (assuming one was configured)
is deleted without holding the hash lock. This is wrong and will result
in a warning [1] being generated by the lockdep annotation that was
added by commit ebe642067455 ("vxlan: Create wrappers for FDB lookup").

Reproducer:

 # ip link add vx0 up type vxlan dstport 4789 external vnifilter local 192.0.2.1
 # bridge vni add vni 10010 remote 198.51.100.1 dev vx0
 # bridge vni del vni 10010 dev vx0

Fix by acquiring the hash lock before the deletion and releasing it
afterwards. Blame the original commit that introduced the issue rather
than the one that exposed it.

[1]
WARNING: CPU: 3 PID: 392 at drivers/net/vxlan/vxlan_core.c:417 vxlan_find_mac+0x17f/0x1a0
[...]
RIP: 0010:vxlan_find_mac+0x17f/0x1a0
[...]
Call Trace:
 <TASK>
 __vxlan_fdb_delete+0xbe/0x560
 vxlan_vni_delete_group+0x2ba/0x940
 vxlan_vni_del.isra.0+0x15f/0x580
 vxlan_process_vni_filter+0x38b/0x7b0
 vxlan_vnifilter_process+0x3bb/0x510
 rtnetlink_rcv_msg+0x2f7/0xb70
 netlink_rcv_skb+0x131/0x360
 netlink_unicast+0x426/0x710
 netlink_sendmsg+0x75a/0xc20
 __sock_sendmsg+0xc1/0x150
 ____sys_sendmsg+0x5aa/0x7b0
 ___sys_sendmsg+0xfc/0x180
 __sys_sendmsg+0x121/0x1b0
 do_syscall_64+0xbb/0x1d0
 entry_SYSCALL_64_after_hwframe+0x4b/0x53

Fixes: f9c4bb0b245c ("vxlan: vni filtering support on collect metadata device")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20250423145131.513029-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/vxlan/vxlan_vnifilter.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/net/vxlan/vxlan_vnifilter.c b/drivers/net/vxlan/vxlan_vnifilter.c
index 6e6e9f05509ab..06d19e90eadb5 100644
--- a/drivers/net/vxlan/vxlan_vnifilter.c
+++ b/drivers/net/vxlan/vxlan_vnifilter.c
@@ -627,7 +627,11 @@ static void vxlan_vni_delete_group(struct vxlan_dev *vxlan,
 	 * default dst remote_ip previously added for this vni
 	 */
 	if (!vxlan_addr_any(&vninode->remote_ip) ||
-	    !vxlan_addr_any(&dst->remote_ip))
+	    !vxlan_addr_any(&dst->remote_ip)) {
+		u32 hash_index = fdb_head_index(vxlan, all_zeros_mac,
+						vninode->vni);
+
+		spin_lock_bh(&vxlan->hash_lock[hash_index]);
 		__vxlan_fdb_delete(vxlan, all_zeros_mac,
 				   (vxlan_addr_any(&vninode->remote_ip) ?
 				   dst->remote_ip : vninode->remote_ip),
@@ -635,6 +639,8 @@ static void vxlan_vni_delete_group(struct vxlan_dev *vxlan,
 				   vninode->vni, vninode->vni,
 				   dst->remote_ifindex,
 				   true);
+		spin_unlock_bh(&vxlan->hash_lock[hash_index]);
+	}
 
 	if (vxlan->dev->flags & IFF_UP) {
 		if (vxlan_addr_multicast(&vninode->remote_ip) &&
-- 
2.39.5

[PATCH 6.14 067/183] xsk: Fix race condition in AF_XDP generic RX path

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: e.kubanski <e.kubanski@partner.samsung.com>

[ Upstream commit a1356ac7749cafc4e27aa62c0c4604b5dca4983e ]

Move rx_lock from xsk_socket to xsk_buff_pool.
Fix synchronization for shared umem mode in
generic RX path where multiple sockets share
single xsk_buff_pool.

RX queue is exclusive to xsk_socket, while FILL
queue can be shared between multiple sockets.
This could result in race condition where two
CPU cores access RX path of two different sockets
sharing the same umem.

Protect both queues by acquiring spinlock in shared
xsk_buff_pool.

Lock contention may be minimized in the future by some
per-thread FQ buffering.

It's safe and necessary to move spin_lock_bh(rx_lock)
after xsk_rcv_check():
* xs->pool and spinlock_init is synchronized by
  xsk_bind() -> xsk_is_bound() memory barriers.
* xsk_rcv_check() may return true at the moment
  of xsk_release() or xsk_unbind_dev(),
  however this will not cause any data races or
  race conditions. xsk_unbind_dev() removes xdp
  socket from all maps and waits for completion
  of all outstanding rx operations. Packets in
  RX path will either complete safely or drop.

Signed-off-by: Eryk Kubanski <e.kubanski@partner.samsung.com>
Fixes: bf0bdd1343efb ("xdp: fix race on generic receive path")
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://patch.msgid.link/20250416101908.10919-1-e.kubanski@partner.samsung.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/net/xdp_sock.h      | 3 ---
 include/net/xsk_buff_pool.h | 2 ++
 net/xdp/xsk.c               | 6 +++---
 net/xdp/xsk_buff_pool.c     | 1 +
 4 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/include/net/xdp_sock.h b/include/net/xdp_sock.h
index a58ae7589d121..e8bd6ddb7b127 100644
--- a/include/net/xdp_sock.h
+++ b/include/net/xdp_sock.h
@@ -71,9 +71,6 @@ struct xdp_sock {
 	 */
 	u32 tx_budget_spent;
 
-	/* Protects generic receive. */
-	spinlock_t rx_lock;
-
 	/* Statistics */
 	u64 rx_dropped;
 	u64 rx_queue_full;
diff --git a/include/net/xsk_buff_pool.h b/include/net/xsk_buff_pool.h
index 50779406bc2d9..7f0a75d6563d8 100644
--- a/include/net/xsk_buff_pool.h
+++ b/include/net/xsk_buff_pool.h
@@ -53,6 +53,8 @@ struct xsk_buff_pool {
 	refcount_t users;
 	struct xdp_umem *umem;
 	struct work_struct work;
+	/* Protects generic receive in shared and non-shared umem mode. */
+	spinlock_t rx_lock;
 	struct list_head free_list;
 	struct list_head xskb_list;
 	u32 heads_cnt;
diff --git a/net/xdp/xsk.c b/net/xdp/xsk.c
index a373a7130d757..c13e13fa79fc0 100644
--- a/net/xdp/xsk.c
+++ b/net/xdp/xsk.c
@@ -337,13 +337,14 @@ int xsk_generic_rcv(struct xdp_sock *xs, struct xdp_buff *xdp)
 	u32 len = xdp_get_buff_len(xdp);
 	int err;
 
-	spin_lock_bh(&xs->rx_lock);
 	err = xsk_rcv_check(xs, xdp, len);
 	if (!err) {
+		spin_lock_bh(&xs->pool->rx_lock);
 		err = __xsk_rcv(xs, xdp, len);
 		xsk_flush(xs);
+		spin_unlock_bh(&xs->pool->rx_lock);
 	}
-	spin_unlock_bh(&xs->rx_lock);
+
 	return err;
 }
 
@@ -1730,7 +1731,6 @@ static int xsk_create(struct net *net, struct socket *sock, int protocol,
 	xs = xdp_sk(sk);
 	xs->state = XSK_READY;
 	mutex_init(&xs->mutex);
-	spin_lock_init(&xs->rx_lock);
 
 	INIT_LIST_HEAD(&xs->map_list);
 	spin_lock_init(&xs->map_list_lock);
diff --git a/net/xdp/xsk_buff_pool.c b/net/xdp/xsk_buff_pool.c
index d158cb6dd3919..63ae121d29e6c 100644
--- a/net/xdp/xsk_buff_pool.c
+++ b/net/xdp/xsk_buff_pool.c
@@ -87,6 +87,7 @@ struct xsk_buff_pool *xp_create_and_assign_umem(struct xdp_sock *xs,
 	pool->addrs = umem->addrs;
 	pool->tx_metadata_len = umem->tx_metadata_len;
 	pool->tx_sw_csum = umem->flags & XDP_UMEM_TX_SW_CSUM;
+	spin_lock_init(&pool->rx_lock);
 	INIT_LIST_HEAD(&pool->free_list);
 	INIT_LIST_HEAD(&pool->xskb_list);
 	INIT_LIST_HEAD(&pool->xsk_tx_list);
-- 
2.39.5

[PATCH 6.14 068/183] xsk: Fix offset calculation in unaligned mode

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: e.kubanski <e.kubanski@partner.samsung.com>

[ Upstream commit bf20af07909925ec0ae6cd4f3b7be0279dfa8768 ]

Bring back previous offset calculation behaviour
in AF_XDP unaligned umem mode.

In unaligned mode, upper 16 bits should contain
data offset, lower 48 bits should contain
only specific chunk location without offset.

Remove pool->headroom duplication into 48bit address.

Signed-off-by: Eryk Kubanski <e.kubanski@partner.samsung.com>
Fixes: bea14124bacb ("xsk: Get rid of xdp_buff_xsk::orig_addr")
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://patch.msgid.link/20250416112925.7501-1-e.kubanski@partner.samsung.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/net/xsk_buff_pool.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/include/net/xsk_buff_pool.h b/include/net/xsk_buff_pool.h
index 7f0a75d6563d8..b3699a8488444 100644
--- a/include/net/xsk_buff_pool.h
+++ b/include/net/xsk_buff_pool.h
@@ -232,8 +232,8 @@ static inline u64 xp_get_handle(struct xdp_buff_xsk *xskb,
 		return orig_addr;
 
 	offset = xskb->xdp.data - xskb->xdp.data_hard_start;
-	orig_addr -= offset;
 	offset += pool->headroom;
+	orig_addr -= offset;
 	return orig_addr + (offset << XSK_UNALIGNED_BUF_OFFSET_SHIFT);
 }
 
-- 
2.39.5

[PATCH 6.14 069/183] net/mlx5e: Use custom tunnel header for vxlan gbp

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Vlad Dogaru <vdogaru@nvidia.com>

[ Upstream commit eacc77a73275895eca0e3655dc6c671853500e2e ]

Symbolic (e.g. "vxlan") and custom (e.g. "tunnel_header_0") tunnels
cannot be combined, but the match params interface does not have fields
for matching on vxlan gbp. To match vxlan bgp, the tc_tun layer uses
tunnel_header_0.

Allow matching on both VNI and GBP by matching the VNI with a custom
tunnel header instead of the symbolic field name.

Matching solely on the VNI continues to use the symbolic field name.

Fixes: 74a778b4a63f ("net/mlx5: HWS, added definers handling")
Signed-off-by: Vlad Dogaru <vdogaru@nvidia.com>
Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/20250423083611.324567-2-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../mellanox/mlx5/core/en/tc_tun_vxlan.c      | 32 +++++++++++++++++--
 1 file changed, 29 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun_vxlan.c b/drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun_vxlan.c
index e4e487c8431b8..b9cf79e271244 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun_vxlan.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun_vxlan.c
@@ -165,9 +165,6 @@ static int mlx5e_tc_tun_parse_vxlan(struct mlx5e_priv *priv,
 	struct flow_match_enc_keyid enc_keyid;
 	void *misc_c, *misc_v;
 
-	misc_c = MLX5_ADDR_OF(fte_match_param, spec->match_criteria, misc_parameters);
-	misc_v = MLX5_ADDR_OF(fte_match_param, spec->match_value, misc_parameters);
-
 	if (!flow_rule_match_key(rule, FLOW_DISSECTOR_KEY_ENC_KEYID))
 		return 0;
 
@@ -182,6 +179,30 @@ static int mlx5e_tc_tun_parse_vxlan(struct mlx5e_priv *priv,
 		err = mlx5e_tc_tun_parse_vxlan_gbp_option(priv, spec, f);
 		if (err)
 			return err;
+
+		/* We can't mix custom tunnel headers with symbolic ones and we
+		 * don't have a symbolic field name for GBP, so we use custom
+		 * tunnel headers in this case. We need hardware support to
+		 * match on custom tunnel headers, but we already know it's
+		 * supported because the previous call successfully checked for
+		 * that.
+		 */
+		misc_c = MLX5_ADDR_OF(fte_match_param, spec->match_criteria,
+				      misc_parameters_5);
+		misc_v = MLX5_ADDR_OF(fte_match_param, spec->match_value,
+				      misc_parameters_5);
+
+		/* Shift by 8 to account for the reserved bits in the vxlan
+		 * header after the VNI.
+		 */
+		MLX5_SET(fte_match_set_misc5, misc_c, tunnel_header_1,
+			 be32_to_cpu(enc_keyid.mask->keyid) << 8);
+		MLX5_SET(fte_match_set_misc5, misc_v, tunnel_header_1,
+			 be32_to_cpu(enc_keyid.key->keyid) << 8);
+
+		spec->match_criteria_enable |= MLX5_MATCH_MISC_PARAMETERS_5;
+
+		return 0;
 	}
 
 	/* match on VNI is required */
@@ -195,6 +216,11 @@ static int mlx5e_tc_tun_parse_vxlan(struct mlx5e_priv *priv,
 		return -EOPNOTSUPP;
 	}
 
+	misc_c = MLX5_ADDR_OF(fte_match_param, spec->match_criteria,
+			      misc_parameters);
+	misc_v = MLX5_ADDR_OF(fte_match_param, spec->match_value,
+			      misc_parameters);
+
 	MLX5_SET(fte_match_set_misc, misc_c, vxlan_vni,
 		 be32_to_cpu(enc_keyid.mask->keyid));
 	MLX5_SET(fte_match_set_misc, misc_v, vxlan_vni,
-- 
2.39.5

[PATCH 6.14 070/183] net/mlx5: E-Switch, Initialize MAC Address for Default GID

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Maor Gottlieb <maorg@nvidia.com>

[ Upstream commit 5d1a04f347e6cbf5ffe74da409a5d71fbe8c5f19 ]

Initialize the source MAC address when creating the default GID entry.
Since this entry is used only for loopback traffic, it only needs to
be a unicast address. A zeroed-out MAC address is sufficient for this
purpose.
Without this fix, random bits would be assigned as the source address.
If these bits formed a multicast address, the firmware would return an
error, preventing the user from switching to switchdev mode:

Error: mlx5_core: Failed setting eswitch to offloads.
kernel answers: Invalid argument

Fixes: 80f09dfc237f ("net/mlx5: Eswitch, enable RoCE loopback traffic")
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/20250423083611.324567-3-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/mellanox/mlx5/core/rdma.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/rdma.c b/drivers/net/ethernet/mellanox/mlx5/core/rdma.c
index a42f6cd99b744..f585ef5a34243 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/rdma.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/rdma.c
@@ -118,8 +118,8 @@ static void mlx5_rdma_make_default_gid(struct mlx5_core_dev *dev, union ib_gid *
 
 static int mlx5_rdma_add_roce_addr(struct mlx5_core_dev *dev)
 {
+	u8 mac[ETH_ALEN] = {};
 	union ib_gid gid;
-	u8 mac[ETH_ALEN];
 
 	mlx5_rdma_make_default_gid(dev, &gid);
 	return mlx5_core_roce_gid_set(dev, 0,
-- 
2.39.5

[PATCH 6.14 071/183] net/mlx5e: TC, Continue the attr process even if encap entry is invalid

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jianbo Liu <jianbol@nvidia.com>

[ Upstream commit 172c034264c894518c012387f2de2f9d6443505d ]

Previously the offload of the rule with header rewrite and mirror to
both internal and external destinations is skipped if the encap entry
is not valid. But it shouldn't because driver will try to offload it
again if neighbor is updated and encap entry is valid, to replace the
old FTE added for slow path. But the extra split attr doesn't exist at
that time as the process is skipped, driver then fails to offload it.
To fix this issue, remove the checking and continue the attr process
if encap entry is invalid.

Fixes: b11bde56246e ("net/mlx5e: TC, Offload rewrite and mirror to both internal and external dests")
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250423083611.324567-4-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/mellanox/mlx5/core/en_tc.c | 5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c
index 9ba99609999f4..f1d908f611349 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c
@@ -1750,9 +1750,6 @@ extra_split_attr_dests_needed(struct mlx5e_tc_flow *flow, struct mlx5_flow_attr
 	    !list_is_first(&attr->list, &flow->attrs))
 		return 0;
 
-	if (flow_flag_test(flow, SLOW))
-		return 0;
-
 	esw_attr = attr->esw_attr;
 	if (!esw_attr->split_count ||
 	    esw_attr->split_count == esw_attr->out_count - 1)
@@ -1766,7 +1763,7 @@ extra_split_attr_dests_needed(struct mlx5e_tc_flow *flow, struct mlx5_flow_attr
 	for (i = esw_attr->split_count; i < esw_attr->out_count; i++) {
 		/* external dest with encap is considered as internal by firmware */
 		if (esw_attr->dests[i].vport == MLX5_VPORT_UPLINK &&
-		    !(esw_attr->dests[i].flags & MLX5_ESW_DEST_ENCAP_VALID))
+		    !(esw_attr->dests[i].flags & MLX5_ESW_DEST_ENCAP))
 			ext_dest = true;
 		else
 			int_dest = true;
-- 
2.39.5

[PATCH 6.14 072/183] net/mlx5e: Fix lock order in mlx5e_tx_reporter_ptpsq_unhealthy_recover

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Cosmin Ratiu <cratiu@nvidia.com>

[ Upstream commit 1c2940ec0ddf51c689ee9ab85ead85c11b77809d ]

RTNL needs to be acquired before state_lock.

Fixes: fdce06bda7e5 ("net/mlx5e: Acquire RTNL lock before RQs/SQs activation/deactivation")
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250423083611.324567-5-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/mellanox/mlx5/core/en/reporter_tx.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en/reporter_tx.c b/drivers/net/ethernet/mellanox/mlx5/core/en/reporter_tx.c
index 09433b91be176..c8adf309ecad0 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en/reporter_tx.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en/reporter_tx.c
@@ -177,6 +177,7 @@ static int mlx5e_tx_reporter_ptpsq_unhealthy_recover(void *ctx)
 
 	priv = ptpsq->txqsq.priv;
 
+	rtnl_lock();
 	mutex_lock(&priv->state_lock);
 	chs = &priv->channels;
 	netdev = priv->netdev;
@@ -184,22 +185,19 @@ static int mlx5e_tx_reporter_ptpsq_unhealthy_recover(void *ctx)
 	carrier_ok = netif_carrier_ok(netdev);
 	netif_carrier_off(netdev);
 
-	rtnl_lock();
 	mlx5e_deactivate_priv_channels(priv);
-	rtnl_unlock();
 
 	mlx5e_ptp_close(chs->ptp);
 	err = mlx5e_ptp_open(priv, &chs->params, chs->c[0]->lag_port, &chs->ptp);
 
-	rtnl_lock();
 	mlx5e_activate_priv_channels(priv);
-	rtnl_unlock();
 
 	/* return carrier back if needed */
 	if (carrier_ok)
 		netif_carrier_on(netdev);
 
 	mutex_unlock(&priv->state_lock);
+	rtnl_unlock();
 
 	return err;
 }
-- 
2.39.5

[PATCH 6.14 073/183] net/mlx5: E-switch, Fix error handling for enabling roce

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Chris Mi <cmi@nvidia.com>

[ Upstream commit 90538d23278a981e344d364e923162fce752afeb ]

The cited commit assumes enabling roce always succeeds. But it is
not true. Add error handling for it.

Fixes: 80f09dfc237f ("net/mlx5: Eswitch, enable RoCE loopback traffic")
Signed-off-by: Chris Mi <cmi@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/20250423083611.324567-6-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/ethernet/mellanox/mlx5/core/eswitch_offloads.c   | 5 ++++-
 drivers/net/ethernet/mellanox/mlx5/core/rdma.c           | 9 +++++----
 drivers/net/ethernet/mellanox/mlx5/core/rdma.h           | 4 ++--
 3 files changed, 11 insertions(+), 7 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c b/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c
index 20cc01ceee8a9..2e0920199d471 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c
@@ -3532,7 +3532,9 @@ int esw_offloads_enable(struct mlx5_eswitch *esw)
 	int err;
 
 	mutex_init(&esw->offloads.termtbl_mutex);
-	mlx5_rdma_enable_roce(esw->dev);
+	err = mlx5_rdma_enable_roce(esw->dev);
+	if (err)
+		goto err_roce;
 
 	err = mlx5_esw_host_number_init(esw);
 	if (err)
@@ -3593,6 +3595,7 @@ int esw_offloads_enable(struct mlx5_eswitch *esw)
 	esw_offloads_metadata_uninit(esw);
 err_metadata:
 	mlx5_rdma_disable_roce(esw->dev);
+err_roce:
 	mutex_destroy(&esw->offloads.termtbl_mutex);
 	return err;
 }
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/rdma.c b/drivers/net/ethernet/mellanox/mlx5/core/rdma.c
index f585ef5a34243..5c552b71e371c 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/rdma.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/rdma.c
@@ -140,17 +140,17 @@ void mlx5_rdma_disable_roce(struct mlx5_core_dev *dev)
 	mlx5_nic_vport_disable_roce(dev);
 }
 
-void mlx5_rdma_enable_roce(struct mlx5_core_dev *dev)
+int mlx5_rdma_enable_roce(struct mlx5_core_dev *dev)
 {
 	int err;
 
 	if (!MLX5_CAP_GEN(dev, roce))
-		return;
+		return 0;
 
 	err = mlx5_nic_vport_enable_roce(dev);
 	if (err) {
 		mlx5_core_err(dev, "Failed to enable RoCE: %d\n", err);
-		return;
+		return err;
 	}
 
 	err = mlx5_rdma_add_roce_addr(dev);
@@ -165,10 +165,11 @@ void mlx5_rdma_enable_roce(struct mlx5_core_dev *dev)
 		goto del_roce_addr;
 	}
 
-	return;
+	return err;
 
 del_roce_addr:
 	mlx5_rdma_del_roce_addr(dev);
 disable_roce:
 	mlx5_nic_vport_disable_roce(dev);
+	return err;
 }
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/rdma.h b/drivers/net/ethernet/mellanox/mlx5/core/rdma.h
index 750cff2a71a4b..3d9e76c3d42fb 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/rdma.h
+++ b/drivers/net/ethernet/mellanox/mlx5/core/rdma.h
@@ -8,12 +8,12 @@
 
 #ifdef CONFIG_MLX5_ESWITCH
 
-void mlx5_rdma_enable_roce(struct mlx5_core_dev *dev);
+int mlx5_rdma_enable_roce(struct mlx5_core_dev *dev);
 void mlx5_rdma_disable_roce(struct mlx5_core_dev *dev);
 
 #else /* CONFIG_MLX5_ESWITCH */
 
-static inline void mlx5_rdma_enable_roce(struct mlx5_core_dev *dev) {}
+static inline int mlx5_rdma_enable_roce(struct mlx5_core_dev *dev) { return 0; }
 static inline void mlx5_rdma_disable_roce(struct mlx5_core_dev *dev) {}
 
 #endif /* CONFIG_MLX5_ESWITCH */
-- 
2.39.5

[PATCH 6.14 074/183] accel/ivpu: Correct DCT interrupt handling

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Karol Wachowski <karol.wachowski@intel.com>

[ Upstream commit e53e004e346062e15df9511bd4b5a19e34701384 ]

Fix improper use of dct_active_percent field in DCT interrupt handler
causing DCT to never get enabled. Set dct_active_percent internally before
IPC to ensure correct driver value even if IPC fails.
Set default DCT value to 30 accordingly to HW architecture specification.

Fixes: a19bffb10c46 ("accel/ivpu: Implement DCT handling")
Signed-off-by: Karol Wachowski <karol.wachowski@intel.com>
Signed-off-by: Maciej Falkowski <maciej.falkowski@linux.intel.com>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://lore.kernel.org/r/20250416102616.384577-1-maciej.falkowski@linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/accel/ivpu/ivpu_hw_btrs.h |  2 +-
 drivers/accel/ivpu/ivpu_pm.c      | 18 ++++++++++--------
 2 files changed, 11 insertions(+), 9 deletions(-)

diff --git a/drivers/accel/ivpu/ivpu_hw_btrs.h b/drivers/accel/ivpu/ivpu_hw_btrs.h
index 71792dab3c210..3855e2df1e0c8 100644
--- a/drivers/accel/ivpu/ivpu_hw_btrs.h
+++ b/drivers/accel/ivpu/ivpu_hw_btrs.h
@@ -14,7 +14,7 @@
 #define PLL_PROFILING_FREQ_DEFAULT   38400000
 #define PLL_PROFILING_FREQ_HIGH      400000000
 
-#define DCT_DEFAULT_ACTIVE_PERCENT 15u
+#define DCT_DEFAULT_ACTIVE_PERCENT 30u
 #define DCT_PERIOD_US		   35300u
 
 int ivpu_hw_btrs_info_init(struct ivpu_device *vdev);
diff --git a/drivers/accel/ivpu/ivpu_pm.c b/drivers/accel/ivpu/ivpu_pm.c
index 5060c5dd40d1f..7acf78aeb3800 100644
--- a/drivers/accel/ivpu/ivpu_pm.c
+++ b/drivers/accel/ivpu/ivpu_pm.c
@@ -433,16 +433,17 @@ int ivpu_pm_dct_enable(struct ivpu_device *vdev, u8 active_percent)
 	active_us = (DCT_PERIOD_US * active_percent) / 100;
 	inactive_us = DCT_PERIOD_US - active_us;
 
+	vdev->pm->dct_active_percent = active_percent;
+
+	ivpu_dbg(vdev, PM, "DCT requested %u%% (D0: %uus, D0i2: %uus)\n",
+		 active_percent, active_us, inactive_us);
+
 	ret = ivpu_jsm_dct_enable(vdev, active_us, inactive_us);
 	if (ret) {
 		ivpu_err_ratelimited(vdev, "Failed to enable DCT: %d\n", ret);
 		return ret;
 	}
 
-	vdev->pm->dct_active_percent = active_percent;
-
-	ivpu_dbg(vdev, PM, "DCT set to %u%% (D0: %uus, D0i2: %uus)\n",
-		 active_percent, active_us, inactive_us);
 	return 0;
 }
 
@@ -450,15 +451,16 @@ int ivpu_pm_dct_disable(struct ivpu_device *vdev)
 {
 	int ret;
 
+	vdev->pm->dct_active_percent = 0;
+
+	ivpu_dbg(vdev, PM, "DCT requested to be disabled\n");
+
 	ret = ivpu_jsm_dct_disable(vdev);
 	if (ret) {
 		ivpu_err_ratelimited(vdev, "Failed to disable DCT: %d\n", ret);
 		return ret;
 	}
 
-	vdev->pm->dct_active_percent = 0;
-
-	ivpu_dbg(vdev, PM, "DCT disabled\n");
 	return 0;
 }
 
@@ -470,7 +472,7 @@ void ivpu_pm_dct_irq_thread_handler(struct ivpu_device *vdev)
 	if (ivpu_hw_btrs_dct_get_request(vdev, &enable))
 		return;
 
-	if (vdev->pm->dct_active_percent)
+	if (enable)
 		ret = ivpu_pm_dct_enable(vdev, DCT_DEFAULT_ACTIVE_PERCENT);
 	else
 		ret = ivpu_pm_dct_disable(vdev);
-- 
2.39.5

[PATCH 6.14 075/183] spi: spi-mem: Add fix to avoid divide error

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Raju Rangoju <Raju.Rangoju@amd.com>

[ Upstream commit 8e4d3d8a5e51e07bd0d6cdd81b5e4af79f796927 ]

For some SPI flash memory operations, dummy bytes are not mandatory. For
example, in Winbond SPINAND flash memory devices, the `write_cache` and
`update_cache` operation variants have zero dummy bytes. Calculating the
duration for SPI memory operations with zero dummy bytes causes
a divide error when `ncycles` is calculated in the
spi_mem_calc_op_duration().

Add changes to skip the 'ncylcles' calculation for zero dummy bytes.

Following divide error is fixed by this change:

 Oops: divide error: 0000 [#1] PREEMPT SMP NOPTI
...

  ? do_trap+0xdb/0x100
  ? do_error_trap+0x75/0xb0
  ? spi_mem_calc_op_duration+0x56/0xb0
  ? exc_divide_error+0x3b/0x70
  ? spi_mem_calc_op_duration+0x56/0xb0
  ? asm_exc_divide_error+0x1b/0x20
  ? spi_mem_calc_op_duration+0x56/0xb0
  ? spinand_select_op_variant+0xee/0x190 [spinand]
  spinand_match_and_init+0x13e/0x1a0 [spinand]
  spinand_manufacturer_match+0x6e/0xa0 [spinand]
  spinand_probe+0x357/0x7f0 [spinand]
  ? kernfs_activate+0x87/0xd0
  spi_mem_probe+0x7a/0xb0
  spi_probe+0x7d/0x130

Fixes: 226d6cb3cb79 ("spi: spi-mem: Estimate the time taken by operations")
Suggested-by: Krishnamoorthi M <krishnamoorthi.m@amd.com>
Co-developed-by: Akshata MukundShetty <akshata.mukundshetty@amd.com>
Signed-off-by: Akshata MukundShetty <akshata.mukundshetty@amd.com>
Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
Link: https://patch.msgid.link/20250424121333.417372-1-Raju.Rangoju@amd.com
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-mem.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/spi/spi-mem.c b/drivers/spi/spi-mem.c
index a9f0f47f4759b..74b013c41601d 100644
--- a/drivers/spi/spi-mem.c
+++ b/drivers/spi/spi-mem.c
@@ -585,7 +585,11 @@ u64 spi_mem_calc_op_duration(struct spi_mem_op *op)
 	ns_per_cycles = 1000000000 / op->max_freq;
 	ncycles += ((op->cmd.nbytes * 8) / op->cmd.buswidth) / (op->cmd.dtr ? 2 : 1);
 	ncycles += ((op->addr.nbytes * 8) / op->addr.buswidth) / (op->addr.dtr ? 2 : 1);
-	ncycles += ((op->dummy.nbytes * 8) / op->dummy.buswidth) / (op->dummy.dtr ? 2 : 1);
+
+	/* Dummy bytes are optional for some SPI flash memory operations */
+	if (op->dummy.nbytes)
+		ncycles += ((op->dummy.nbytes * 8) / op->dummy.buswidth) / (op->dummy.dtr ? 2 : 1);
+
 	ncycles += ((op->data.nbytes * 8) / op->data.buswidth) / (op->data.dtr ? 2 : 1);
 
 	return ncycles * ns_per_cycles;
-- 
2.39.5

[PATCH 6.14 076/183] ASoC: amd: acp: Fix NULL pointer deref in acp_i2s_set_tdm_slot

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Venkata Prasad Potturu <venkataprasad.potturu@amd.com>

[ Upstream commit 6d9b64156d849e358cb49b6b899fb0b7d262bda8 ]

Update chip data using dev_get_drvdata(dev->parent) to fix
NULL pointer deref in acp_i2s_set_tdm_slot.

Fixes: cd60dec8994c ("ASoC: amd: acp: Refactor TDM slots selction based on acp revision id")

Signed-off-by: Venkata Prasad Potturu <venkataprasad.potturu@amd.com>
Link: https://patch.msgid.link/20250425060144.1773265-2-venkataprasad.potturu@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/amd/acp/acp-i2s.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/soc/amd/acp/acp-i2s.c b/sound/soc/amd/acp/acp-i2s.c
index 89e99ed4275a2..f631147fc63bd 100644
--- a/sound/soc/amd/acp/acp-i2s.c
+++ b/sound/soc/amd/acp/acp-i2s.c
@@ -101,7 +101,7 @@ static int acp_i2s_set_tdm_slot(struct snd_soc_dai *dai, u32 tx_mask, u32 rx_mas
 	struct acp_stream *stream;
 	int slot_len, no_of_slots;
 
-	chip = dev_get_platdata(dev);
+	chip = dev_get_drvdata(dev->parent);
 	switch (slot_width) {
 	case SLOT_WIDTH_8:
 		slot_len = 8;
-- 
2.39.5

[PATCH 6.14 077/183] cpufreq: Introduce policy->boost_supported flag

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Viresh Kumar <viresh.kumar@linaro.org>

[ Upstream commit 1f7d1bab50e6ae517f8b6699e56d709d61ae13e5 ]

It is possible to have a scenario where not all cpufreq policies support
boost frequencies. And letting sysfs (or other parts of the kernel)
enable boost feature for that policy isn't correct.

Add a new flag, boost_supported, which will be set to true by the
cpufreq core only if the freq table contains valid boost frequencies.

Some cpufreq drivers though don't have boost frequencies in the
freq-table, they can set this flag from their ->init() callbacks.

Once all the drivers are updated to set the flag correctly, we can check
it before enabling boost feature for a policy.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Stable-dep-of: 3d59224947b0 ("cpufreq: ACPI: Re-sync CPU boost state on system resume")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/cpufreq/freq_table.c | 4 ++++
 include/linux/cpufreq.h      | 3 +++
 2 files changed, 7 insertions(+)

diff --git a/drivers/cpufreq/freq_table.c b/drivers/cpufreq/freq_table.c
index 178e17009a16e..9db21ffc11979 100644
--- a/drivers/cpufreq/freq_table.c
+++ b/drivers/cpufreq/freq_table.c
@@ -367,6 +367,10 @@ int cpufreq_table_validate_and_sort(struct cpufreq_policy *policy)
 	if (ret)
 		return ret;
 
+	/* Driver's may have set this field already */
+	if (policy_has_boost_freq(policy))
+		policy->boost_supported = true;
+
 	return set_freq_table_sorted(policy);
 }
 
diff --git a/include/linux/cpufreq.h b/include/linux/cpufreq.h
index a604c54ae44da..73024830bd730 100644
--- a/include/linux/cpufreq.h
+++ b/include/linux/cpufreq.h
@@ -144,6 +144,9 @@ struct cpufreq_policy {
 	/* Per policy boost enabled flag. */
 	bool			boost_enabled;
 
+	/* Per policy boost supported flag. */
+	bool			boost_supported;
+
 	 /* Cached frequency lookup from cpufreq_driver_resolve_freq. */
 	unsigned int cached_target_freq;
 	unsigned int cached_resolved_idx;
-- 
2.39.5

[PATCH 6.14 078/183] cpufreq: acpi: Set policy->boost_supported

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Viresh Kumar <viresh.kumar@linaro.org>

[ Upstream commit be6b8681a0e4c1477a2c1cb155f7b9188aa88acb ]

With a later commit, the cpufreq core will call the ->set_boost()
callback only if the policy supports boost frequency. The
boost_supported flag is set by the cpufreq core if policy->freq_table is
set and one or more boost frequencies are present.

For other drivers, the flag must be set explicitly.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Stable-dep-of: 3d59224947b0 ("cpufreq: ACPI: Re-sync CPU boost state on system resume")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/cpufreq/acpi-cpufreq.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/cpufreq/acpi-cpufreq.c b/drivers/cpufreq/acpi-cpufreq.c
index 463b69a2dff52..ae0766b5a076b 100644
--- a/drivers/cpufreq/acpi-cpufreq.c
+++ b/drivers/cpufreq/acpi-cpufreq.c
@@ -909,6 +909,9 @@ static int acpi_cpufreq_cpu_init(struct cpufreq_policy *policy)
 	if (perf->states[0].core_frequency * 1000 != freq_table[0].frequency)
 		pr_warn(FW_WARN "P-state 0 is not max freq\n");
 
+	if (acpi_cpufreq_driver.set_boost)
+		policy->boost_supported = true;
+
 	return result;
 
 err_unreg:
-- 
2.39.5

[PATCH 6.14 079/183] cpufreq: ACPI: Re-sync CPU boost state on system resume

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Viresh Kumar <viresh.kumar@linaro.org>

[ Upstream commit 3d59224947b024c9b2aa6e149a1537d449adb828 ]

During CPU hotunplug events (such as those occurring during
suspend/resume cycles), platform firmware may modify the CPU boost
state.

If boost was disabled prior to CPU removal, it correctly remains
disabled upon re-plug. However, if firmware re-enables boost while the
CPU is offline, the CPU may return with boost enabled—even if it was
originally disabled—once it is hotplugged back in. This leads to
inconsistent behavior and violates user or kernel policy expectations.

To maintain consistency, ensure the boost state is re-synchronized with
the kernel policy when a CPU is hotplugged back in.

Note: This re-synchronization is not necessary during the initial call
to ->init() for a CPU, as the cpufreq core handles it via
cpufreq_online(). At that point, acpi_cpufreq_driver.boost_enabled is
initialized to the value returned by boost_state(0).

Fixes: 2b16c631832d ("cpufreq: ACPI: Remove set_boost in acpi_cpufreq_cpu_init()")
Reported-by: Nicholas Chin <nic.c3.14@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220013
Tested-by: Nicholas Chin <nic.c3.14@gmail.com>
Reviewed-by: Lifeng Zheng <zhenglifeng1@huawei.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://patch.msgid.link/9c7de55fb06015c1b77e7dafd564b659838864e0.1745511526.git.viresh.kumar@linaro.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/cpufreq/acpi-cpufreq.c | 15 +++++++++++++--
 1 file changed, 13 insertions(+), 2 deletions(-)

diff --git a/drivers/cpufreq/acpi-cpufreq.c b/drivers/cpufreq/acpi-cpufreq.c
index ae0766b5a076b..453b629d3de65 100644
--- a/drivers/cpufreq/acpi-cpufreq.c
+++ b/drivers/cpufreq/acpi-cpufreq.c
@@ -909,8 +909,19 @@ static int acpi_cpufreq_cpu_init(struct cpufreq_policy *policy)
 	if (perf->states[0].core_frequency * 1000 != freq_table[0].frequency)
 		pr_warn(FW_WARN "P-state 0 is not max freq\n");
 
-	if (acpi_cpufreq_driver.set_boost)
-		policy->boost_supported = true;
+	if (acpi_cpufreq_driver.set_boost) {
+		if (policy->boost_supported) {
+			/*
+			 * The firmware may have altered boost state while the
+			 * CPU was offline (for example during a suspend-resume
+			 * cycle).
+			 */
+			if (policy->boost_enabled != boost_state(cpu))
+				set_boost(policy, policy->boost_enabled);
+		} else {
+			policy->boost_supported = true;
+		}
+	}
 
 	return result;
 
-- 
2.39.5

[PATCH 6.14 080/183] Bluetooth: hci_conn: Fix not setting conn_timeout for Broadcast Receiver

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

[ Upstream commit 6d0417e4e1cf66fd917f06f0454958362714ef7d ]

Broadcast Receiver requires creating PA sync but the command just
generates a status so this makes use of __hci_cmd_sync_status_sk to wait
for HCI_EV_LE_PA_SYNC_ESTABLISHED, also because of this chance it is not
longer necessary to use a custom method to serialize the process of
creating the PA sync since the cmd_work_sync itself ensures only one
command would be pending which now awaits for
HCI_EV_LE_PA_SYNC_ESTABLISHED before proceeding to next connection.

Fixes: 4a5e0ba68676 ("Bluetooth: ISO: Do not emit LE PA Create Sync if previous is pending")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/net/bluetooth/hci.h      |  2 +
 include/net/bluetooth/hci_core.h | 13 +++--
 include/net/bluetooth/hci_sync.h |  2 +
 net/bluetooth/hci_conn.c         | 92 +-------------------------------
 net/bluetooth/hci_event.c        |  6 +--
 net/bluetooth/hci_sync.c         | 87 ++++++++++++++++++++++++++++--
 6 files changed, 95 insertions(+), 107 deletions(-)

diff --git a/include/net/bluetooth/hci.h b/include/net/bluetooth/hci.h
index a8586c3058c7c..8ea7a063cc651 100644
--- a/include/net/bluetooth/hci.h
+++ b/include/net/bluetooth/hci.h
@@ -1931,6 +1931,8 @@ struct hci_cp_le_pa_create_sync {
 	__u8      sync_cte_type;
 } __packed;
 
+#define HCI_OP_LE_PA_CREATE_SYNC_CANCEL	0x2045
+
 #define HCI_OP_LE_PA_TERM_SYNC		0x2046
 struct hci_cp_le_pa_term_sync {
 	__le16    handle;
diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h
index f0b49aad519eb..49f51877988d8 100644
--- a/include/net/bluetooth/hci_core.h
+++ b/include/net/bluetooth/hci_core.h
@@ -1105,10 +1105,8 @@ static inline struct hci_conn *hci_conn_hash_lookup_bis(struct hci_dev *hdev,
 	return NULL;
 }
 
-static inline struct hci_conn *hci_conn_hash_lookup_sid(struct hci_dev *hdev,
-							__u8 sid,
-							bdaddr_t *dst,
-							__u8 dst_type)
+static inline struct hci_conn *
+hci_conn_hash_lookup_create_pa_sync(struct hci_dev *hdev)
 {
 	struct hci_conn_hash *h = &hdev->conn_hash;
 	struct hci_conn  *c;
@@ -1116,8 +1114,10 @@ static inline struct hci_conn *hci_conn_hash_lookup_sid(struct hci_dev *hdev,
 	rcu_read_lock();
 
 	list_for_each_entry_rcu(c, &h->list, list) {
-		if (c->type != ISO_LINK  || bacmp(&c->dst, dst) ||
-		    c->dst_type != dst_type || c->sid != sid)
+		if (c->type != ISO_LINK)
+			continue;
+
+		if (!test_bit(HCI_CONN_CREATE_PA_SYNC, &c->flags))
 			continue;
 
 		rcu_read_unlock();
@@ -1516,7 +1516,6 @@ bool hci_setup_sync(struct hci_conn *conn, __u16 handle);
 void hci_sco_setup(struct hci_conn *conn, __u8 status);
 bool hci_iso_setup_path(struct hci_conn *conn);
 int hci_le_create_cis_pending(struct hci_dev *hdev);
-int hci_pa_create_sync_pending(struct hci_dev *hdev);
 int hci_le_big_create_sync_pending(struct hci_dev *hdev);
 int hci_conn_check_create_cis(struct hci_conn *conn);
 
diff --git a/include/net/bluetooth/hci_sync.h b/include/net/bluetooth/hci_sync.h
index 7e2cf0cca939a..93dac4c7f9e3e 100644
--- a/include/net/bluetooth/hci_sync.h
+++ b/include/net/bluetooth/hci_sync.h
@@ -185,3 +185,5 @@ int hci_connect_le_sync(struct hci_dev *hdev, struct hci_conn *conn);
 int hci_cancel_connect_sync(struct hci_dev *hdev, struct hci_conn *conn);
 int hci_le_conn_update_sync(struct hci_dev *hdev, struct hci_conn *conn,
 			    struct hci_conn_params *params);
+
+int hci_connect_pa_sync(struct hci_dev *hdev, struct hci_conn *conn);
diff --git a/net/bluetooth/hci_conn.c b/net/bluetooth/hci_conn.c
index d097e308a7554..badaa6c199204 100644
--- a/net/bluetooth/hci_conn.c
+++ b/net/bluetooth/hci_conn.c
@@ -2061,95 +2061,6 @@ static int create_big_sync(struct hci_dev *hdev, void *data)
 	return hci_le_create_big(conn, &conn->iso_qos);
 }
 
-static void create_pa_complete(struct hci_dev *hdev, void *data, int err)
-{
-	bt_dev_dbg(hdev, "");
-
-	if (err)
-		bt_dev_err(hdev, "Unable to create PA: %d", err);
-}
-
-static bool hci_conn_check_create_pa_sync(struct hci_conn *conn)
-{
-	if (conn->type != ISO_LINK || conn->sid == HCI_SID_INVALID)
-		return false;
-
-	return true;
-}
-
-static int create_pa_sync(struct hci_dev *hdev, void *data)
-{
-	struct hci_cp_le_pa_create_sync cp = {0};
-	struct hci_conn *conn;
-	int err = 0;
-
-	hci_dev_lock(hdev);
-
-	rcu_read_lock();
-
-	/* The spec allows only one pending LE Periodic Advertising Create
-	 * Sync command at a time. If the command is pending now, don't do
-	 * anything. We check for pending connections after each PA Sync
-	 * Established event.
-	 *
-	 * BLUETOOTH CORE SPECIFICATION Version 5.3 | Vol 4, Part E
-	 * page 2493:
-	 *
-	 * If the Host issues this command when another HCI_LE_Periodic_
-	 * Advertising_Create_Sync command is pending, the Controller shall
-	 * return the error code Command Disallowed (0x0C).
-	 */
-	list_for_each_entry_rcu(conn, &hdev->conn_hash.list, list) {
-		if (test_bit(HCI_CONN_CREATE_PA_SYNC, &conn->flags))
-			goto unlock;
-	}
-
-	list_for_each_entry_rcu(conn, &hdev->conn_hash.list, list) {
-		if (hci_conn_check_create_pa_sync(conn)) {
-			struct bt_iso_qos *qos = &conn->iso_qos;
-
-			cp.options = qos->bcast.options;
-			cp.sid = conn->sid;
-			cp.addr_type = conn->dst_type;
-			bacpy(&cp.addr, &conn->dst);
-			cp.skip = cpu_to_le16(qos->bcast.skip);
-			cp.sync_timeout = cpu_to_le16(qos->bcast.sync_timeout);
-			cp.sync_cte_type = qos->bcast.sync_cte_type;
-
-			break;
-		}
-	}
-
-unlock:
-	rcu_read_unlock();
-
-	hci_dev_unlock(hdev);
-
-	if (bacmp(&cp.addr, BDADDR_ANY)) {
-		hci_dev_set_flag(hdev, HCI_PA_SYNC);
-		set_bit(HCI_CONN_CREATE_PA_SYNC, &conn->flags);
-
-		err = __hci_cmd_sync_status(hdev, HCI_OP_LE_PA_CREATE_SYNC,
-					    sizeof(cp), &cp, HCI_CMD_TIMEOUT);
-		if (!err)
-			err = hci_update_passive_scan_sync(hdev);
-
-		if (err) {
-			hci_dev_clear_flag(hdev, HCI_PA_SYNC);
-			clear_bit(HCI_CONN_CREATE_PA_SYNC, &conn->flags);
-		}
-	}
-
-	return err;
-}
-
-int hci_pa_create_sync_pending(struct hci_dev *hdev)
-{
-	/* Queue start pa_create_sync and scan */
-	return hci_cmd_sync_queue(hdev, create_pa_sync,
-				  NULL, create_pa_complete);
-}
-
 struct hci_conn *hci_pa_create_sync(struct hci_dev *hdev, bdaddr_t *dst,
 				    __u8 dst_type, __u8 sid,
 				    struct bt_iso_qos *qos)
@@ -2164,10 +2075,11 @@ struct hci_conn *hci_pa_create_sync(struct hci_dev *hdev, bdaddr_t *dst,
 	conn->dst_type = dst_type;
 	conn->sid = sid;
 	conn->state = BT_LISTEN;
+	conn->conn_timeout = msecs_to_jiffies(qos->bcast.sync_timeout * 10);
 
 	hci_conn_hold(conn);
 
-	hci_pa_create_sync_pending(hdev);
+	hci_connect_pa_sync(hdev, conn);
 
 	return conn;
 }
diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c
index 20d3cdcb14f6c..216db540e502c 100644
--- a/net/bluetooth/hci_event.c
+++ b/net/bluetooth/hci_event.c
@@ -6371,8 +6371,7 @@ static void hci_le_pa_sync_estabilished_evt(struct hci_dev *hdev, void *data,
 
 	hci_dev_clear_flag(hdev, HCI_PA_SYNC);
 
-	conn = hci_conn_hash_lookup_sid(hdev, ev->sid, &ev->bdaddr,
-					ev->bdaddr_type);
+	conn = hci_conn_hash_lookup_create_pa_sync(hdev);
 	if (!conn) {
 		bt_dev_err(hdev,
 			   "Unable to find connection for dst %pMR sid 0x%2.2x",
@@ -6411,9 +6410,6 @@ static void hci_le_pa_sync_estabilished_evt(struct hci_dev *hdev, void *data,
 	}
 
 unlock:
-	/* Handle any other pending PA sync command */
-	hci_pa_create_sync_pending(hdev);
-
 	hci_dev_unlock(hdev);
 }
 
diff --git a/net/bluetooth/hci_sync.c b/net/bluetooth/hci_sync.c
index 14c3ee5c6a1e8..9d03717263bf8 100644
--- a/net/bluetooth/hci_sync.c
+++ b/net/bluetooth/hci_sync.c
@@ -2693,16 +2693,16 @@ static u8 hci_update_accept_list_sync(struct hci_dev *hdev)
 
 	/* Force address filtering if PA Sync is in progress */
 	if (hci_dev_test_flag(hdev, HCI_PA_SYNC)) {
-		struct hci_cp_le_pa_create_sync *sent;
+		struct hci_conn *conn;
 
-		sent = hci_sent_cmd_data(hdev, HCI_OP_LE_PA_CREATE_SYNC);
-		if (sent) {
+		conn = hci_conn_hash_lookup_create_pa_sync(hdev);
+		if (conn) {
 			struct conn_params pa;
 
 			memset(&pa, 0, sizeof(pa));
 
-			bacpy(&pa.addr, &sent->addr);
-			pa.addr_type = sent->addr_type;
+			bacpy(&pa.addr, &conn->dst);
+			pa.addr_type = conn->dst_type;
 
 			/* Clear first since there could be addresses left
 			 * behind.
@@ -6895,3 +6895,80 @@ int hci_le_conn_update_sync(struct hci_dev *hdev, struct hci_conn *conn,
 	return __hci_cmd_sync_status(hdev, HCI_OP_LE_CONN_UPDATE,
 				     sizeof(cp), &cp, HCI_CMD_TIMEOUT);
 }
+
+static void create_pa_complete(struct hci_dev *hdev, void *data, int err)
+{
+	bt_dev_dbg(hdev, "err %d", err);
+
+	if (!err)
+		return;
+
+	hci_dev_clear_flag(hdev, HCI_PA_SYNC);
+
+	if (err == -ECANCELED)
+		return;
+
+	hci_dev_lock(hdev);
+
+	hci_update_passive_scan_sync(hdev);
+
+	hci_dev_unlock(hdev);
+}
+
+static int hci_le_pa_create_sync(struct hci_dev *hdev, void *data)
+{
+	struct hci_cp_le_pa_create_sync cp;
+	struct hci_conn *conn = data;
+	struct bt_iso_qos *qos = &conn->iso_qos;
+	int err;
+
+	if (!hci_conn_valid(hdev, conn))
+		return -ECANCELED;
+
+	if (hci_dev_test_and_set_flag(hdev, HCI_PA_SYNC))
+		return -EBUSY;
+
+	/* Mark HCI_CONN_CREATE_PA_SYNC so hci_update_passive_scan_sync can
+	 * program the address in the allow list so PA advertisements can be
+	 * received.
+	 */
+	set_bit(HCI_CONN_CREATE_PA_SYNC, &conn->flags);
+
+	hci_update_passive_scan_sync(hdev);
+
+	memset(&cp, 0, sizeof(cp));
+	cp.options = qos->bcast.options;
+	cp.sid = conn->sid;
+	cp.addr_type = conn->dst_type;
+	bacpy(&cp.addr, &conn->dst);
+	cp.skip = cpu_to_le16(qos->bcast.skip);
+	cp.sync_timeout = cpu_to_le16(qos->bcast.sync_timeout);
+	cp.sync_cte_type = qos->bcast.sync_cte_type;
+
+	/* The spec allows only one pending LE Periodic Advertising Create
+	 * Sync command at a time so we forcefully wait for PA Sync Established
+	 * event since cmd_work can only schedule one command at a time.
+	 *
+	 * BLUETOOTH CORE SPECIFICATION Version 5.3 | Vol 4, Part E
+	 * page 2493:
+	 *
+	 * If the Host issues this command when another HCI_LE_Periodic_
+	 * Advertising_Create_Sync command is pending, the Controller shall
+	 * return the error code Command Disallowed (0x0C).
+	 */
+	err = __hci_cmd_sync_status_sk(hdev, HCI_OP_LE_PA_CREATE_SYNC,
+				       sizeof(cp), &cp,
+				       HCI_EV_LE_PA_SYNC_ESTABLISHED,
+				       conn->conn_timeout, NULL);
+	if (err == -ETIMEDOUT)
+		__hci_cmd_sync_status(hdev, HCI_OP_LE_PA_CREATE_SYNC_CANCEL,
+				      0, NULL, HCI_CMD_TIMEOUT);
+
+	return err;
+}
+
+int hci_connect_pa_sync(struct hci_dev *hdev, struct hci_conn *conn)
+{
+	return hci_cmd_sync_queue_once(hdev, hci_le_pa_create_sync, conn,
+				       create_pa_complete);
+}
-- 
2.39.5

[PATCH 6.14 081/183] Bluetooth: hci_conn: Fix not setting timeout for BIG Create Sync

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

[ Upstream commit 024421cf39923927ab2b5fe895d1d922b9abe67f ]

BIG Create Sync requires the command to just generates a status so this
makes use of __hci_cmd_sync_status_sk to wait for
HCI_EVT_LE_BIG_SYNC_ESTABLISHED, also because of this chance it is not
longer necessary to use a custom method to serialize the process of
creating the BIG sync since the cmd_work_sync itself ensures only one
command would be pending which now awaits for
HCI_EVT_LE_BIG_SYNC_ESTABLISHED before proceeding to next connection.

Fixes: 42ecf1947135 ("Bluetooth: ISO: Do not emit LE BIG Create Sync if previous is pending")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/net/bluetooth/hci.h      |  2 +-
 include/net/bluetooth/hci_core.h |  7 ++-
 include/net/bluetooth/hci_sync.h |  1 +
 net/bluetooth/hci_conn.c         | 89 ++------------------------------
 net/bluetooth/hci_event.c        |  9 ++--
 net/bluetooth/hci_sync.c         | 63 ++++++++++++++++++++++
 net/bluetooth/iso.c              | 26 +++++-----
 7 files changed, 88 insertions(+), 109 deletions(-)

diff --git a/include/net/bluetooth/hci.h b/include/net/bluetooth/hci.h
index 8ea7a063cc651..797992019f9ee 100644
--- a/include/net/bluetooth/hci.h
+++ b/include/net/bluetooth/hci.h
@@ -2832,7 +2832,7 @@ struct hci_evt_le_create_big_complete {
 	__le16  bis_handle[];
 } __packed;
 
-#define HCI_EVT_LE_BIG_SYNC_ESTABILISHED 0x1d
+#define HCI_EVT_LE_BIG_SYNC_ESTABLISHED 0x1d
 struct hci_evt_le_big_sync_estabilished {
 	__u8    status;
 	__u8    handle;
diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h
index 49f51877988d8..7d8bab892154e 100644
--- a/include/net/bluetooth/hci_core.h
+++ b/include/net/bluetooth/hci_core.h
@@ -1516,7 +1516,6 @@ bool hci_setup_sync(struct hci_conn *conn, __u16 handle);
 void hci_sco_setup(struct hci_conn *conn, __u8 status);
 bool hci_iso_setup_path(struct hci_conn *conn);
 int hci_le_create_cis_pending(struct hci_dev *hdev);
-int hci_le_big_create_sync_pending(struct hci_dev *hdev);
 int hci_conn_check_create_cis(struct hci_conn *conn);
 
 struct hci_conn *hci_conn_add(struct hci_dev *hdev, int type, bdaddr_t *dst,
@@ -1557,9 +1556,9 @@ struct hci_conn *hci_connect_bis(struct hci_dev *hdev, bdaddr_t *dst,
 				 __u8 data_len, __u8 *data);
 struct hci_conn *hci_pa_create_sync(struct hci_dev *hdev, bdaddr_t *dst,
 		       __u8 dst_type, __u8 sid, struct bt_iso_qos *qos);
-int hci_le_big_create_sync(struct hci_dev *hdev, struct hci_conn *hcon,
-			   struct bt_iso_qos *qos,
-			   __u16 sync_handle, __u8 num_bis, __u8 bis[]);
+int hci_conn_big_create_sync(struct hci_dev *hdev, struct hci_conn *hcon,
+			     struct bt_iso_qos *qos, __u16 sync_handle,
+			     __u8 num_bis, __u8 bis[]);
 int hci_conn_check_link_mode(struct hci_conn *conn);
 int hci_conn_check_secure(struct hci_conn *conn, __u8 sec_level);
 int hci_conn_security(struct hci_conn *conn, __u8 sec_level, __u8 auth_type,
diff --git a/include/net/bluetooth/hci_sync.h b/include/net/bluetooth/hci_sync.h
index 93dac4c7f9e3e..72558c826aa1b 100644
--- a/include/net/bluetooth/hci_sync.h
+++ b/include/net/bluetooth/hci_sync.h
@@ -187,3 +187,4 @@ int hci_le_conn_update_sync(struct hci_dev *hdev, struct hci_conn *conn,
 			    struct hci_conn_params *params);
 
 int hci_connect_pa_sync(struct hci_dev *hdev, struct hci_conn *conn);
+int hci_connect_big_sync(struct hci_dev *hdev, struct hci_conn *conn);
diff --git a/net/bluetooth/hci_conn.c b/net/bluetooth/hci_conn.c
index badaa6c199204..ae66fa0a5fb58 100644
--- a/net/bluetooth/hci_conn.c
+++ b/net/bluetooth/hci_conn.c
@@ -2084,89 +2084,9 @@ struct hci_conn *hci_pa_create_sync(struct hci_dev *hdev, bdaddr_t *dst,
 	return conn;
 }
 
-static bool hci_conn_check_create_big_sync(struct hci_conn *conn)
-{
-	if (!conn->num_bis)
-		return false;
-
-	return true;
-}
-
-static void big_create_sync_complete(struct hci_dev *hdev, void *data, int err)
-{
-	bt_dev_dbg(hdev, "");
-
-	if (err)
-		bt_dev_err(hdev, "Unable to create BIG sync: %d", err);
-}
-
-static int big_create_sync(struct hci_dev *hdev, void *data)
-{
-	DEFINE_FLEX(struct hci_cp_le_big_create_sync, pdu, bis, num_bis, 0x11);
-	struct hci_conn *conn;
-
-	rcu_read_lock();
-
-	pdu->num_bis = 0;
-
-	/* The spec allows only one pending LE BIG Create Sync command at
-	 * a time. If the command is pending now, don't do anything. We
-	 * check for pending connections after each BIG Sync Established
-	 * event.
-	 *
-	 * BLUETOOTH CORE SPECIFICATION Version 5.3 | Vol 4, Part E
-	 * page 2586:
-	 *
-	 * If the Host sends this command when the Controller is in the
-	 * process of synchronizing to any BIG, i.e. the HCI_LE_BIG_Sync_
-	 * Established event has not been generated, the Controller shall
-	 * return the error code Command Disallowed (0x0C).
-	 */
-	list_for_each_entry_rcu(conn, &hdev->conn_hash.list, list) {
-		if (test_bit(HCI_CONN_CREATE_BIG_SYNC, &conn->flags))
-			goto unlock;
-	}
-
-	list_for_each_entry_rcu(conn, &hdev->conn_hash.list, list) {
-		if (hci_conn_check_create_big_sync(conn)) {
-			struct bt_iso_qos *qos = &conn->iso_qos;
-
-			set_bit(HCI_CONN_CREATE_BIG_SYNC, &conn->flags);
-
-			pdu->handle = qos->bcast.big;
-			pdu->sync_handle = cpu_to_le16(conn->sync_handle);
-			pdu->encryption = qos->bcast.encryption;
-			memcpy(pdu->bcode, qos->bcast.bcode,
-			       sizeof(pdu->bcode));
-			pdu->mse = qos->bcast.mse;
-			pdu->timeout = cpu_to_le16(qos->bcast.timeout);
-			pdu->num_bis = conn->num_bis;
-			memcpy(pdu->bis, conn->bis, conn->num_bis);
-
-			break;
-		}
-	}
-
-unlock:
-	rcu_read_unlock();
-
-	if (!pdu->num_bis)
-		return 0;
-
-	return hci_send_cmd(hdev, HCI_OP_LE_BIG_CREATE_SYNC,
-			    struct_size(pdu, bis, pdu->num_bis), pdu);
-}
-
-int hci_le_big_create_sync_pending(struct hci_dev *hdev)
-{
-	/* Queue big_create_sync */
-	return hci_cmd_sync_queue_once(hdev, big_create_sync,
-				       NULL, big_create_sync_complete);
-}
-
-int hci_le_big_create_sync(struct hci_dev *hdev, struct hci_conn *hcon,
-			   struct bt_iso_qos *qos,
-			   __u16 sync_handle, __u8 num_bis, __u8 bis[])
+int hci_conn_big_create_sync(struct hci_dev *hdev, struct hci_conn *hcon,
+			     struct bt_iso_qos *qos, __u16 sync_handle,
+			     __u8 num_bis, __u8 bis[])
 {
 	int err;
 
@@ -2183,9 +2103,10 @@ int hci_le_big_create_sync(struct hci_dev *hdev, struct hci_conn *hcon,
 
 		hcon->num_bis = num_bis;
 		memcpy(hcon->bis, bis, num_bis);
+		hcon->conn_timeout = msecs_to_jiffies(qos->bcast.timeout * 10);
 	}
 
-	return hci_le_big_create_sync_pending(hdev);
+	return hci_connect_big_sync(hdev, hcon);
 }
 
 static void create_big_complete(struct hci_dev *hdev, void *data, int err)
diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c
index 216db540e502c..ab940ec698c0f 100644
--- a/net/bluetooth/hci_event.c
+++ b/net/bluetooth/hci_event.c
@@ -6921,7 +6921,7 @@ static void hci_le_big_sync_established_evt(struct hci_dev *hdev, void *data,
 
 	bt_dev_dbg(hdev, "status 0x%2.2x", ev->status);
 
-	if (!hci_le_ev_skb_pull(hdev, skb, HCI_EVT_LE_BIG_SYNC_ESTABILISHED,
+	if (!hci_le_ev_skb_pull(hdev, skb, HCI_EVT_LE_BIG_SYNC_ESTABLISHED,
 				flex_array_size(ev, bis, ev->num_bis)))
 		return;
 
@@ -6992,9 +6992,6 @@ static void hci_le_big_sync_established_evt(struct hci_dev *hdev, void *data,
 		}
 
 unlock:
-	/* Handle any other pending BIG sync command */
-	hci_le_big_create_sync_pending(hdev);
-
 	hci_dev_unlock(hdev);
 }
 
@@ -7116,8 +7113,8 @@ static const struct hci_le_ev {
 		     hci_le_create_big_complete_evt,
 		     sizeof(struct hci_evt_le_create_big_complete),
 		     HCI_MAX_EVENT_SIZE),
-	/* [0x1d = HCI_EV_LE_BIG_SYNC_ESTABILISHED] */
-	HCI_LE_EV_VL(HCI_EVT_LE_BIG_SYNC_ESTABILISHED,
+	/* [0x1d = HCI_EV_LE_BIG_SYNC_ESTABLISHED] */
+	HCI_LE_EV_VL(HCI_EVT_LE_BIG_SYNC_ESTABLISHED,
 		     hci_le_big_sync_established_evt,
 		     sizeof(struct hci_evt_le_big_sync_estabilished),
 		     HCI_MAX_EVENT_SIZE),
diff --git a/net/bluetooth/hci_sync.c b/net/bluetooth/hci_sync.c
index 9d03717263bf8..85c6ac082bfcd 100644
--- a/net/bluetooth/hci_sync.c
+++ b/net/bluetooth/hci_sync.c
@@ -6972,3 +6972,66 @@ int hci_connect_pa_sync(struct hci_dev *hdev, struct hci_conn *conn)
 	return hci_cmd_sync_queue_once(hdev, hci_le_pa_create_sync, conn,
 				       create_pa_complete);
 }
+
+static void create_big_complete(struct hci_dev *hdev, void *data, int err)
+{
+	struct hci_conn *conn = data;
+
+	bt_dev_dbg(hdev, "err %d", err);
+
+	if (err == -ECANCELED)
+		return;
+
+	if (hci_conn_valid(hdev, conn))
+		clear_bit(HCI_CONN_CREATE_BIG_SYNC, &conn->flags);
+}
+
+static int hci_le_big_create_sync(struct hci_dev *hdev, void *data)
+{
+	DEFINE_FLEX(struct hci_cp_le_big_create_sync, cp, bis, num_bis, 0x11);
+	struct hci_conn *conn = data;
+	struct bt_iso_qos *qos = &conn->iso_qos;
+	int err;
+
+	if (!hci_conn_valid(hdev, conn))
+		return -ECANCELED;
+
+	set_bit(HCI_CONN_CREATE_BIG_SYNC, &conn->flags);
+
+	memset(cp, 0, sizeof(*cp));
+	cp->handle = qos->bcast.big;
+	cp->sync_handle = cpu_to_le16(conn->sync_handle);
+	cp->encryption = qos->bcast.encryption;
+	memcpy(cp->bcode, qos->bcast.bcode, sizeof(cp->bcode));
+	cp->mse = qos->bcast.mse;
+	cp->timeout = cpu_to_le16(qos->bcast.timeout);
+	cp->num_bis = conn->num_bis;
+	memcpy(cp->bis, conn->bis, conn->num_bis);
+
+	/* The spec allows only one pending LE BIG Create Sync command at
+	 * a time, so we forcefully wait for BIG Sync Established event since
+	 * cmd_work can only schedule one command at a time.
+	 *
+	 * BLUETOOTH CORE SPECIFICATION Version 5.3 | Vol 4, Part E
+	 * page 2586:
+	 *
+	 * If the Host sends this command when the Controller is in the
+	 * process of synchronizing to any BIG, i.e. the HCI_LE_BIG_Sync_
+	 * Established event has not been generated, the Controller shall
+	 * return the error code Command Disallowed (0x0C).
+	 */
+	err = __hci_cmd_sync_status_sk(hdev, HCI_OP_LE_BIG_CREATE_SYNC,
+				       struct_size(cp, bis, cp->num_bis), cp,
+				       HCI_EVT_LE_BIG_SYNC_ESTABLISHED,
+				       conn->conn_timeout, NULL);
+	if (err == -ETIMEDOUT)
+		hci_le_big_terminate_sync(hdev, cp->handle);
+
+	return err;
+}
+
+int hci_connect_big_sync(struct hci_dev *hdev, struct hci_conn *conn)
+{
+	return hci_cmd_sync_queue_once(hdev, hci_le_big_create_sync, conn,
+				       create_big_complete);
+}
diff --git a/net/bluetooth/iso.c b/net/bluetooth/iso.c
index 0cb52a3308bae..491efb327b5b5 100644
--- a/net/bluetooth/iso.c
+++ b/net/bluetooth/iso.c
@@ -1450,14 +1450,13 @@ static void iso_conn_big_sync(struct sock *sk)
 	lock_sock(sk);
 
 	if (!test_and_set_bit(BT_SK_BIG_SYNC, &iso_pi(sk)->flags)) {
-		err = hci_le_big_create_sync(hdev, iso_pi(sk)->conn->hcon,
-					     &iso_pi(sk)->qos,
-					     iso_pi(sk)->sync_handle,
-					     iso_pi(sk)->bc_num_bis,
-					     iso_pi(sk)->bc_bis);
+		err = hci_conn_big_create_sync(hdev, iso_pi(sk)->conn->hcon,
+					       &iso_pi(sk)->qos,
+					       iso_pi(sk)->sync_handle,
+					       iso_pi(sk)->bc_num_bis,
+					       iso_pi(sk)->bc_bis);
 		if (err)
-			bt_dev_err(hdev, "hci_le_big_create_sync: %d",
-				   err);
+			bt_dev_err(hdev, "hci_big_create_sync: %d", err);
 	}
 
 	release_sock(sk);
@@ -1906,7 +1905,7 @@ static void iso_conn_ready(struct iso_conn *conn)
 					      hcon);
 		} else if (test_bit(HCI_CONN_BIG_SYNC_FAILED, &hcon->flags)) {
 			ev = hci_recv_event_data(hcon->hdev,
-						 HCI_EVT_LE_BIG_SYNC_ESTABILISHED);
+						 HCI_EVT_LE_BIG_SYNC_ESTABLISHED);
 
 			/* Get reference to PA sync parent socket, if it exists */
 			parent = iso_get_sock(&hcon->src, &hcon->dst,
@@ -2097,12 +2096,11 @@ int iso_connect_ind(struct hci_dev *hdev, bdaddr_t *bdaddr, __u8 *flags)
 
 			if (!test_bit(BT_SK_DEFER_SETUP, &bt_sk(sk)->flags) &&
 			    !test_and_set_bit(BT_SK_BIG_SYNC, &iso_pi(sk)->flags)) {
-				err = hci_le_big_create_sync(hdev,
-							     hcon,
-							     &iso_pi(sk)->qos,
-							     iso_pi(sk)->sync_handle,
-							     iso_pi(sk)->bc_num_bis,
-							     iso_pi(sk)->bc_bis);
+				err = hci_conn_big_create_sync(hdev, hcon,
+							       &iso_pi(sk)->qos,
+							       iso_pi(sk)->sync_handle,
+							       iso_pi(sk)->bc_num_bis,
+							       iso_pi(sk)->bc_bis);
 				if (err) {
 					bt_dev_err(hdev, "hci_le_big_create_sync: %d",
 						   err);
-- 
2.39.5

[PATCH 6.14 082/183] Bluetooth: btintel_pcie: Avoid redundant buffer allocation

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Kiran K <kiran.k@intel.com>

[ Upstream commit d1af1f02ef8653dea4573e444136c8331189cd59 ]

Reuse the skb buffer provided by the PCIe driver to pass it onto the
stack, instead of copying it to a new skb.

Fixes: c2b636b3f788 ("Bluetooth: btintel_pcie: Add support for PCIe transport")
Signed-off-by: Kiran K <kiran.k@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/bluetooth/btintel_pcie.c | 33 ++++++++++++--------------------
 1 file changed, 12 insertions(+), 21 deletions(-)

diff --git a/drivers/bluetooth/btintel_pcie.c b/drivers/bluetooth/btintel_pcie.c
index 6130854b6658a..ea9b137b1491c 100644
--- a/drivers/bluetooth/btintel_pcie.c
+++ b/drivers/bluetooth/btintel_pcie.c
@@ -595,8 +595,10 @@ static int btintel_pcie_recv_event(struct hci_dev *hdev, struct sk_buff *skb)
 		/* This is a debug event that comes from IML and OP image when it
 		 * starts execution. There is no need pass this event to stack.
 		 */
-		if (skb->data[2] == 0x97)
+		if (skb->data[2] == 0x97) {
+			hci_recv_diag(hdev, skb);
 			return 0;
+		}
 	}
 
 	return hci_recv_frame(hdev, skb);
@@ -612,7 +614,6 @@ static int btintel_pcie_recv_frame(struct btintel_pcie_data *data,
 	u8 pkt_type;
 	u16 plen;
 	u32 pcie_pkt_type;
-	struct sk_buff *new_skb;
 	void *pdata;
 	struct hci_dev *hdev = data->hdev;
 
@@ -689,24 +690,20 @@ static int btintel_pcie_recv_frame(struct btintel_pcie_data *data,
 
 	bt_dev_dbg(hdev, "pkt_type: 0x%2.2x len: %u", pkt_type, plen);
 
-	new_skb = bt_skb_alloc(plen, GFP_ATOMIC);
-	if (!new_skb) {
-		bt_dev_err(hdev, "Failed to allocate memory for skb of len: %u",
-			   skb->len);
-		ret = -ENOMEM;
-		goto exit_error;
-	}
-
-	hci_skb_pkt_type(new_skb) = pkt_type;
-	skb_put_data(new_skb, skb->data, plen);
+	hci_skb_pkt_type(skb) = pkt_type;
 	hdev->stat.byte_rx += plen;
+	skb_trim(skb, plen);
 
 	if (pcie_pkt_type == BTINTEL_PCIE_HCI_EVT_PKT)
-		ret = btintel_pcie_recv_event(hdev, new_skb);
+		ret = btintel_pcie_recv_event(hdev, skb);
 	else
-		ret = hci_recv_frame(hdev, new_skb);
+		ret = hci_recv_frame(hdev, skb);
+	skb = NULL; /* skb is freed in the callee  */
 
 exit_error:
+	if (skb)
+		kfree_skb(skb);
+
 	if (ret)
 		hdev->stat.err_rx++;
 
@@ -720,16 +717,10 @@ static void btintel_pcie_rx_work(struct work_struct *work)
 	struct btintel_pcie_data *data = container_of(work,
 					struct btintel_pcie_data, rx_work);
 	struct sk_buff *skb;
-	int err;
-	struct hci_dev *hdev = data->hdev;
 
 	/* Process the sk_buf in queue and send to the HCI layer */
 	while ((skb = skb_dequeue(&data->rx_skb_q))) {
-		err = btintel_pcie_recv_frame(data, skb);
-		if (err)
-			bt_dev_err(hdev, "Failed to send received frame: %d",
-				   err);
-		kfree_skb(skb);
+		btintel_pcie_recv_frame(data, skb);
 	}
 }
 
-- 
2.39.5

[PATCH 6.14 083/183] Bluetooth: btusb: avoid NULL pointer dereference in skb_dequeue()

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: En-Wei Wu <en-wei.wu@canonical.com>

[ Upstream commit 0317b033abcd1d8dd2798f0e2de5e84543d0bd22 ]

A NULL pointer dereference can occur in skb_dequeue() when processing a
QCA firmware crash dump on WCN7851 (0489:e0f3).

[ 93.672166] Bluetooth: hci0: ACL memdump size(589824)

[ 93.672475] BUG: kernel NULL pointer dereference, address: 0000000000000008
[ 93.672517] Workqueue: hci0 hci_devcd_rx [bluetooth]
[ 93.672598] RIP: 0010:skb_dequeue+0x50/0x80

The issue stems from handle_dump_pkt_qca() returning 0 even when a dump
packet is successfully processed. This is because it incorrectly
forwards the return value of hci_devcd_init() (which returns 0 on
success). As a result, the caller (btusb_recv_acl_qca() or
btusb_recv_evt_qca()) assumes the packet was not handled and passes it
to hci_recv_frame(), leading to premature kfree() of the skb.

Later, hci_devcd_rx() attempts to dequeue the same skb from the dump
queue, resulting in a NULL pointer dereference.

Fix this by:
1. Making handle_dump_pkt_qca() return 0 on success and negative errno
   on failure, consistent with kernel conventions.
2. Splitting dump packet detection into separate functions for ACL
   and event packets for better structure and readability.

This ensures dump packets are properly identified and consumed, avoiding
double handling and preventing NULL pointer access.

Fixes: 20981ce2d5a5 ("Bluetooth: btusb: Add WCN6855 devcoredump support")
Signed-off-by: En-Wei Wu <en-wei.wu@canonical.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/bluetooth/btusb.c | 101 +++++++++++++++++++++++++++-----------
 1 file changed, 73 insertions(+), 28 deletions(-)

diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index bfd769f2026b3..ccd0a21da3955 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -3010,22 +3010,16 @@ static void btusb_coredump_qca(struct hci_dev *hdev)
 		bt_dev_err(hdev, "%s: triggle crash failed (%d)", __func__, err);
 }
 
-/*
- * ==0: not a dump pkt.
- * < 0: fails to handle a dump pkt
- * > 0: otherwise.
- */
+/* Return: 0 on success, negative errno on failure. */
 static int handle_dump_pkt_qca(struct hci_dev *hdev, struct sk_buff *skb)
 {
-	int ret = 1;
+	int ret = 0;
 	u8 pkt_type;
 	u8 *sk_ptr;
 	unsigned int sk_len;
 	u16 seqno;
 	u32 dump_size;
 
-	struct hci_event_hdr *event_hdr;
-	struct hci_acl_hdr *acl_hdr;
 	struct qca_dump_hdr *dump_hdr;
 	struct btusb_data *btdata = hci_get_drvdata(hdev);
 	struct usb_device *udev = btdata->udev;
@@ -3035,30 +3029,14 @@ static int handle_dump_pkt_qca(struct hci_dev *hdev, struct sk_buff *skb)
 	sk_len = skb->len;
 
 	if (pkt_type == HCI_ACLDATA_PKT) {
-		acl_hdr = hci_acl_hdr(skb);
-		if (le16_to_cpu(acl_hdr->handle) != QCA_MEMDUMP_ACL_HANDLE)
-			return 0;
 		sk_ptr += HCI_ACL_HDR_SIZE;
 		sk_len -= HCI_ACL_HDR_SIZE;
-		event_hdr = (struct hci_event_hdr *)sk_ptr;
-	} else {
-		event_hdr = hci_event_hdr(skb);
 	}
 
-	if ((event_hdr->evt != HCI_VENDOR_PKT)
-		|| (event_hdr->plen != (sk_len - HCI_EVENT_HDR_SIZE)))
-		return 0;
-
 	sk_ptr += HCI_EVENT_HDR_SIZE;
 	sk_len -= HCI_EVENT_HDR_SIZE;
 
 	dump_hdr = (struct qca_dump_hdr *)sk_ptr;
-	if ((sk_len < offsetof(struct qca_dump_hdr, data))
-		|| (dump_hdr->vse_class != QCA_MEMDUMP_VSE_CLASS)
-	    || (dump_hdr->msg_type != QCA_MEMDUMP_MSG_TYPE))
-		return 0;
-
-	/*it is dump pkt now*/
 	seqno = le16_to_cpu(dump_hdr->seqno);
 	if (seqno == 0) {
 		set_bit(BTUSB_HW_SSR_ACTIVE, &btdata->flags);
@@ -3132,17 +3110,84 @@ static int handle_dump_pkt_qca(struct hci_dev *hdev, struct sk_buff *skb)
 	return ret;
 }
 
+/* Return: true if the ACL packet is a dump packet, false otherwise. */
+static bool acl_pkt_is_dump_qca(struct hci_dev *hdev, struct sk_buff *skb)
+{
+	u8 *sk_ptr;
+	unsigned int sk_len;
+
+	struct hci_event_hdr *event_hdr;
+	struct hci_acl_hdr *acl_hdr;
+	struct qca_dump_hdr *dump_hdr;
+
+	sk_ptr = skb->data;
+	sk_len = skb->len;
+
+	acl_hdr = hci_acl_hdr(skb);
+	if (le16_to_cpu(acl_hdr->handle) != QCA_MEMDUMP_ACL_HANDLE)
+		return false;
+
+	sk_ptr += HCI_ACL_HDR_SIZE;
+	sk_len -= HCI_ACL_HDR_SIZE;
+	event_hdr = (struct hci_event_hdr *)sk_ptr;
+
+	if ((event_hdr->evt != HCI_VENDOR_PKT) ||
+	    (event_hdr->plen != (sk_len - HCI_EVENT_HDR_SIZE)))
+		return false;
+
+	sk_ptr += HCI_EVENT_HDR_SIZE;
+	sk_len -= HCI_EVENT_HDR_SIZE;
+
+	dump_hdr = (struct qca_dump_hdr *)sk_ptr;
+	if ((sk_len < offsetof(struct qca_dump_hdr, data)) ||
+	    (dump_hdr->vse_class != QCA_MEMDUMP_VSE_CLASS) ||
+	    (dump_hdr->msg_type != QCA_MEMDUMP_MSG_TYPE))
+		return false;
+
+	return true;
+}
+
+/* Return: true if the event packet is a dump packet, false otherwise. */
+static bool evt_pkt_is_dump_qca(struct hci_dev *hdev, struct sk_buff *skb)
+{
+	u8 *sk_ptr;
+	unsigned int sk_len;
+
+	struct hci_event_hdr *event_hdr;
+	struct qca_dump_hdr *dump_hdr;
+
+	sk_ptr = skb->data;
+	sk_len = skb->len;
+
+	event_hdr = hci_event_hdr(skb);
+
+	if ((event_hdr->evt != HCI_VENDOR_PKT)
+	    || (event_hdr->plen != (sk_len - HCI_EVENT_HDR_SIZE)))
+		return false;
+
+	sk_ptr += HCI_EVENT_HDR_SIZE;
+	sk_len -= HCI_EVENT_HDR_SIZE;
+
+	dump_hdr = (struct qca_dump_hdr *)sk_ptr;
+	if ((sk_len < offsetof(struct qca_dump_hdr, data)) ||
+	    (dump_hdr->vse_class != QCA_MEMDUMP_VSE_CLASS) ||
+	    (dump_hdr->msg_type != QCA_MEMDUMP_MSG_TYPE))
+		return false;
+
+	return true;
+}
+
 static int btusb_recv_acl_qca(struct hci_dev *hdev, struct sk_buff *skb)
 {
-	if (handle_dump_pkt_qca(hdev, skb))
-		return 0;
+	if (acl_pkt_is_dump_qca(hdev, skb))
+		return handle_dump_pkt_qca(hdev, skb);
 	return hci_recv_frame(hdev, skb);
 }
 
 static int btusb_recv_evt_qca(struct hci_dev *hdev, struct sk_buff *skb)
 {
-	if (handle_dump_pkt_qca(hdev, skb))
-		return 0;
+	if (evt_pkt_is_dump_qca(hdev, skb))
+		return handle_dump_pkt_qca(hdev, skb);
 	return hci_recv_frame(hdev, skb);
 }
 
-- 
2.39.5

[PATCH 6.14 084/183] Bluetooth: btintel_pcie: Add additional to checks to clear TX/RX paths

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Kiran K <kiran.k@intel.com>

[ Upstream commit 1c7664957e4edb234c69de2db4be1f740d2df564 ]

Due to a hardware issue, there is a possibility that the driver may miss
an MSIx interrupt on the RX/TX data path. Since the TX and RX paths are
independent, when a TX MSIx interrupt occurs, the driver can check the
RX queue for any pending data and process it if present. The same
approach applies to the RX path.

Fixes: c2b636b3f788 ("Bluetooth: btintel_pcie: Add support for PCIe transport")
Signed-off-by: Chandrashekar Devegowda <chandrashekar.devegowda@intel.com>
Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/bluetooth/btintel_pcie.c | 24 +++++++++++++++++++-----
 1 file changed, 19 insertions(+), 5 deletions(-)

diff --git a/drivers/bluetooth/btintel_pcie.c b/drivers/bluetooth/btintel_pcie.c
index ea9b137b1491c..1636f636fbef0 100644
--- a/drivers/bluetooth/btintel_pcie.c
+++ b/drivers/bluetooth/btintel_pcie.c
@@ -773,10 +773,8 @@ static void btintel_pcie_msix_rx_handle(struct btintel_pcie_data *data)
 	bt_dev_dbg(hdev, "RXQ: cr_hia: %u  cr_tia: %u", cr_hia, cr_tia);
 
 	/* Check CR_TIA and CR_HIA for change */
-	if (cr_tia == cr_hia) {
-		bt_dev_warn(hdev, "RXQ: no new CD found");
+	if (cr_tia == cr_hia)
 		return;
-	}
 
 	rxq = &data->rxq;
 
@@ -812,6 +810,16 @@ static irqreturn_t btintel_pcie_msix_isr(int irq, void *data)
 	return IRQ_WAKE_THREAD;
 }
 
+static inline bool btintel_pcie_is_rxq_empty(struct btintel_pcie_data *data)
+{
+	return data->ia.cr_hia[BTINTEL_PCIE_RXQ_NUM] == data->ia.cr_tia[BTINTEL_PCIE_RXQ_NUM];
+}
+
+static inline bool btintel_pcie_is_txackq_empty(struct btintel_pcie_data *data)
+{
+	return data->ia.cr_tia[BTINTEL_PCIE_TXQ_NUM] == data->ia.cr_hia[BTINTEL_PCIE_TXQ_NUM];
+}
+
 static irqreturn_t btintel_pcie_irq_msix_handler(int irq, void *dev_id)
 {
 	struct msix_entry *entry = dev_id;
@@ -839,12 +847,18 @@ static irqreturn_t btintel_pcie_irq_msix_handler(int irq, void *dev_id)
 		btintel_pcie_msix_gp0_handler(data);
 
 	/* For TX */
-	if (intr_fh & BTINTEL_PCIE_MSIX_FH_INT_CAUSES_0)
+	if (intr_fh & BTINTEL_PCIE_MSIX_FH_INT_CAUSES_0) {
 		btintel_pcie_msix_tx_handle(data);
+		if (!btintel_pcie_is_rxq_empty(data))
+			btintel_pcie_msix_rx_handle(data);
+	}
 
 	/* For RX */
-	if (intr_fh & BTINTEL_PCIE_MSIX_FH_INT_CAUSES_1)
+	if (intr_fh & BTINTEL_PCIE_MSIX_FH_INT_CAUSES_1) {
 		btintel_pcie_msix_rx_handle(data);
+		if (!btintel_pcie_is_txackq_empty(data))
+			btintel_pcie_msix_tx_handle(data);
+	}
 
 	/*
 	 * Before sending the interrupt the HW disables it to prevent a nested
-- 
2.39.5

[PATCH 6.14 085/183] Bluetooth: L2CAP: copy RX timestamp to new fragments

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Pauli Virtanen <pav@iki.fi>

[ Upstream commit 3908feb1bd7f319a10e18d84369a48163264cc7d ]

Copy timestamp too when allocating new skb for received fragment.
Fixes missing RX timestamps with fragmentation.

Fixes: 4d7ea8ee90e4 ("Bluetooth: L2CAP: Fix handling fragmented length")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/bluetooth/l2cap_core.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c
index a55388fbf07c8..c219a8c596d3e 100644
--- a/net/bluetooth/l2cap_core.c
+++ b/net/bluetooth/l2cap_core.c
@@ -7380,6 +7380,9 @@ static int l2cap_recv_frag(struct l2cap_conn *conn, struct sk_buff *skb,
 			return -ENOMEM;
 		/* Init rx_len */
 		conn->rx_len = len;
+
+		skb_set_delivery_time(conn->rx_skb, skb->tstamp,
+				      skb->tstamp_type);
 	}
 
 	/* Copy as much as the rx_skb can hold */
-- 
2.39.5

[PATCH 6.14 086/183] net: mscc: ocelot: delete PVID VLAN when readding it as non-PVID

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Vladimir Oltean <vladimir.oltean@nxp.com>

[ Upstream commit 5ec6d7d737a491256cd37e33910f7ac1978db591 ]

The following set of commands:

ip link add br0 type bridge vlan_filtering 1 # vlan_default_pvid 1 is implicit
ip link set swp0 master br0
bridge vlan add dev swp0 vid 1

should result in the dropping of untagged and 802.1p-tagged traffic, but
we see that it continues to be accepted. Whereas, had we deleted VID 1
instead, the aforementioned dropping would have worked

This is because the ANA_PORT_DROP_CFG update logic doesn't run, because
ocelot_vlan_add() only calls ocelot_port_set_pvid() if the new VLAN has
the BRIDGE_VLAN_INFO_PVID flag.

Similar to other drivers like mt7530_port_vlan_add() which handle this
case correctly, we need to test whether the VLAN we're changing used to
have the BRIDGE_VLAN_INFO_PVID flag, but lost it now. That amounts to a
PVID deletion and should be treated as such.

Regarding blame attribution: this never worked properly since the
introduction of bridge VLAN filtering in commit 7142529f1688 ("net:
mscc: ocelot: add VLAN filtering"). However, there was a significant
paradigm shift which aligned the ANA_PORT_DROP_CFG register with the
PVID concept rather than with the native VLAN concept, and that change
wasn't targeted for 'stable'. Realistically, that is as far as this fix
needs to be propagated to.

Fixes: be0576fed6d3 ("net: mscc: ocelot: move the logic to drop 802.1p traffic to the pvid deletion")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250424223734.3096202-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/mscc/ocelot.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/net/ethernet/mscc/ocelot.c b/drivers/net/ethernet/mscc/ocelot.c
index ef93df5208871..08bee56aea35f 100644
--- a/drivers/net/ethernet/mscc/ocelot.c
+++ b/drivers/net/ethernet/mscc/ocelot.c
@@ -830,6 +830,7 @@ EXPORT_SYMBOL(ocelot_vlan_prepare);
 int ocelot_vlan_add(struct ocelot *ocelot, int port, u16 vid, bool pvid,
 		    bool untagged)
 {
+	struct ocelot_port *ocelot_port = ocelot->ports[port];
 	int err;
 
 	/* Ignore VID 0 added to our RX filter by the 8021q module, since
@@ -849,6 +850,11 @@ int ocelot_vlan_add(struct ocelot *ocelot, int port, u16 vid, bool pvid,
 					   ocelot_bridge_vlan_find(ocelot, vid));
 		if (err)
 			return err;
+	} else if (ocelot_port->pvid_vlan &&
+		   ocelot_bridge_vlan_find(ocelot, vid) == ocelot_port->pvid_vlan) {
+		err = ocelot_port_set_pvid(ocelot, port, NULL);
+		if (err)
+			return err;
 	}
 
 	/* Untagged egress vlan clasification */
-- 
2.39.5

[PATCH 6.14 087/183] octeon_ep_vf: Resolve netdevice usage count issue

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sathesh B Edara <sedara@marvell.com>

[ Upstream commit 8548c84c004be3da4ffbe35ed0589041a4050c03 ]

The netdevice usage count increases during transmit queue timeouts
because netdev_hold is called in ndo_tx_timeout, scheduling a task
to reinitialize the card. Although netdev_put is called at the end
of the scheduled work, rtnl_unlock checks the reference count during
cleanup. This could cause issues if transmit timeout is called on
multiple queues.

Fixes: cb7dd712189f ("octeon_ep_vf: Add driver framework and device initialization")
Signed-off-by: Sathesh B Edara <sedara@marvell.com>
Link: https://patch.msgid.link/20250424133944.28128-1-sedara@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/marvell/octeon_ep_vf/octep_vf_main.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/marvell/octeon_ep_vf/octep_vf_main.c b/drivers/net/ethernet/marvell/octeon_ep_vf/octep_vf_main.c
index 18c922dd5fc64..ccb69bc5c9529 100644
--- a/drivers/net/ethernet/marvell/octeon_ep_vf/octep_vf_main.c
+++ b/drivers/net/ethernet/marvell/octeon_ep_vf/octep_vf_main.c
@@ -835,7 +835,9 @@ static void octep_vf_tx_timeout(struct net_device *netdev, unsigned int txqueue)
 	struct octep_vf_device *oct = netdev_priv(netdev);
 
 	netdev_hold(netdev, NULL, GFP_ATOMIC);
-	schedule_work(&oct->tx_timeout_task);
+	if (!schedule_work(&oct->tx_timeout_task))
+		netdev_put(netdev, NULL);
+
 }
 
 static int octep_vf_set_mac(struct net_device *netdev, void *p)
-- 
2.39.5

[PATCH 6.14 088/183] bnxt_en: improve TX timestamping FIFO configuration

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Vadim Fedorenko <vadfed@meta.com>

[ Upstream commit 8f7ae5a85137b913cb97e2d24409d36548d0bab1 ]

Reconfiguration of netdev may trigger close/open procedure which can
break FIFO status by adjusting the amount of empty slots for TX
timestamps. But it is not really needed because timestamps for the
packets sent over the wire still can be retrieved. On the other side,
during netdev close procedure any skbs waiting for TX timestamps can be
leaked because there is no cleaning procedure called. Free skbs waiting
for TX timestamps when closing netdev.

Fixes: 8aa2a79e9b95 ("bnxt_en: Increase the max total outstanding PTP TX packets to 4")
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Vadim Fedorenko <vadfed@meta.com>
Link: https://patch.msgid.link/20250424125547.460632-1-vadfed@meta.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/broadcom/bnxt/bnxt.c     |  5 ++--
 drivers/net/ethernet/broadcom/bnxt/bnxt_ptp.c | 29 ++++++++++++++-----
 drivers/net/ethernet/broadcom/bnxt/bnxt_ptp.h |  1 +
 3 files changed, 25 insertions(+), 10 deletions(-)

diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
index 1b39574e3fa22..e44f9692dc2ee 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
@@ -3403,6 +3403,9 @@ static void bnxt_free_tx_skbs(struct bnxt *bp)
 		}
 		netdev_tx_reset_queue(netdev_get_tx_queue(bp->dev, i));
 	}
+
+	if (bp->ptp_cfg && !(bp->fw_cap & BNXT_FW_CAP_TX_TS_CMP))
+		bnxt_ptp_free_txts_skbs(bp->ptp_cfg);
 }
 
 static void bnxt_free_one_rx_ring(struct bnxt *bp, struct bnxt_rx_ring_info *rxr)
@@ -12570,8 +12573,6 @@ static int __bnxt_open_nic(struct bnxt *bp, bool irq_re_init, bool link_re_init)
 	/* VF-reps may need to be re-opened after the PF is re-opened */
 	if (BNXT_PF(bp))
 		bnxt_vf_reps_open(bp);
-	if (bp->ptp_cfg && !(bp->fw_cap & BNXT_FW_CAP_TX_TS_CMP))
-		WRITE_ONCE(bp->ptp_cfg->tx_avail, BNXT_MAX_TX_TS);
 	bnxt_ptp_init_rtc(bp, true);
 	bnxt_ptp_cfg_tstamp_filters(bp);
 	if (BNXT_SUPPORTS_MULTI_RSS_CTX(bp))
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_ptp.c b/drivers/net/ethernet/broadcom/bnxt/bnxt_ptp.c
index 2d4e19b96ee74..0669d43472f51 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt_ptp.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_ptp.c
@@ -794,6 +794,27 @@ static long bnxt_ptp_ts_aux_work(struct ptp_clock_info *ptp_info)
 	return HZ;
 }
 
+void bnxt_ptp_free_txts_skbs(struct bnxt_ptp_cfg *ptp)
+{
+	struct bnxt_ptp_tx_req *txts_req;
+	u16 cons = ptp->txts_cons;
+
+	/* make sure ptp aux worker finished with
+	 * possible BNXT_STATE_OPEN set
+	 */
+	ptp_cancel_worker_sync(ptp->ptp_clock);
+
+	ptp->tx_avail = BNXT_MAX_TX_TS;
+	while (cons != ptp->txts_prod) {
+		txts_req = &ptp->txts_req[cons];
+		if (!IS_ERR_OR_NULL(txts_req->tx_skb))
+			dev_kfree_skb_any(txts_req->tx_skb);
+		cons = NEXT_TXTS(cons);
+	}
+	ptp->txts_cons = cons;
+	ptp_schedule_worker(ptp->ptp_clock, 0);
+}
+
 int bnxt_ptp_get_txts_prod(struct bnxt_ptp_cfg *ptp, u16 *prod)
 {
 	spin_lock_bh(&ptp->ptp_tx_lock);
@@ -1105,7 +1126,6 @@ int bnxt_ptp_init(struct bnxt *bp)
 void bnxt_ptp_clear(struct bnxt *bp)
 {
 	struct bnxt_ptp_cfg *ptp = bp->ptp_cfg;
-	int i;
 
 	if (!ptp)
 		return;
@@ -1117,12 +1137,5 @@ void bnxt_ptp_clear(struct bnxt *bp)
 	kfree(ptp->ptp_info.pin_config);
 	ptp->ptp_info.pin_config = NULL;
 
-	for (i = 0; i < BNXT_MAX_TX_TS; i++) {
-		if (ptp->txts_req[i].tx_skb) {
-			dev_kfree_skb_any(ptp->txts_req[i].tx_skb);
-			ptp->txts_req[i].tx_skb = NULL;
-		}
-	}
-
 	bnxt_unmap_ptp_regs(bp);
 }
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_ptp.h b/drivers/net/ethernet/broadcom/bnxt/bnxt_ptp.h
index a95f05e9c579b..0481161d26ef5 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt_ptp.h
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_ptp.h
@@ -162,6 +162,7 @@ int bnxt_ptp_cfg_tstamp_filters(struct bnxt *bp);
 void bnxt_ptp_reapply_pps(struct bnxt *bp);
 int bnxt_hwtstamp_set(struct net_device *dev, struct ifreq *ifr);
 int bnxt_hwtstamp_get(struct net_device *dev, struct ifreq *ifr);
+void bnxt_ptp_free_txts_skbs(struct bnxt_ptp_cfg *ptp);
 int bnxt_ptp_get_txts_prod(struct bnxt_ptp_cfg *ptp, u16 *prod);
 void bnxt_get_tx_ts_p5(struct bnxt *bp, struct sk_buff *skb, u16 prod);
 int bnxt_get_rx_ts_p5(struct bnxt *bp, u64 *ts, u32 pkt_ts);
-- 
2.39.5

[PATCH 6.14 089/183] rtase: Modify the condition used to detect overflow in rtase_calc_time_mitigation

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Justin Lai <justinlai0215@realtek.com>

[ Upstream commit 68f9d8974b545668e1be2422240b25a92e304b14 ]

Fix the following compile error reported by the kernel test
robot by modifying the condition used to detect overflow in
rtase_calc_time_mitigation.

In file included from include/linux/mdio.h:10:0,
                  from drivers/net/ethernet/realtek/rtase/rtase_main.c:58:
 In function 'u16_encode_bits',
     inlined from 'rtase_calc_time_mitigation.constprop' at drivers/net/
     ethernet/realtek/rtase/rtase_main.c:1915:13,
     inlined from 'rtase_init_software_variable.isra.41' at drivers/net/
     ethernet/realtek/rtase/rtase_main.c:1961:13,
     inlined from 'rtase_init_one' at drivers/net/ethernet/realtek/
     rtase/rtase_main.c:2111:2:
>> include/linux/bitfield.h:178:3: error: call to '__field_overflow'
      declared with attribute error: value doesn't fit into mask
    __field_overflow();     \
    ^~~~~~~~~~~~~~~~~~
 include/linux/bitfield.h:198:2: note: in expansion of macro
 '____MAKE_OP'
   ____MAKE_OP(u##size,u##size,,)
   ^~~~~~~~~~~
 include/linux/bitfield.h:200:1: note: in expansion of macro
 '__MAKE_OP'
  __MAKE_OP(16)
  ^~~~~~~~~

Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202503182158.nkAlbJWX-lkp@intel.com/
Fixes: a36e9f5cfe9e ("rtase: Add support for a pci table in this module")
Signed-off-by: Justin Lai <justinlai0215@realtek.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250424040444.5530-1-justinlai0215@realtek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/realtek/rtase/rtase_main.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/realtek/rtase/rtase_main.c b/drivers/net/ethernet/realtek/rtase/rtase_main.c
index 2aacc1996796d..55b8d36661530 100644
--- a/drivers/net/ethernet/realtek/rtase/rtase_main.c
+++ b/drivers/net/ethernet/realtek/rtase/rtase_main.c
@@ -1925,8 +1925,8 @@ static u16 rtase_calc_time_mitigation(u32 time_us)
 
 	time_us = min_t(int, time_us, RTASE_MITI_MAX_TIME);
 
-	msb = fls(time_us);
-	if (msb >= RTASE_MITI_COUNT_BIT_NUM) {
+	if (time_us > RTASE_MITI_TIME_COUNT_MASK) {
+		msb = fls(time_us);
 		time_unit = msb - RTASE_MITI_COUNT_BIT_NUM;
 		time_count = time_us >> (msb - RTASE_MITI_COUNT_BIT_NUM);
 	} else {
-- 
2.39.5

[PATCH 6.14 090/183] net: ethernet: mtk-star-emac: fix spinlock recursion issues on rx/tx poll

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>

[ Upstream commit 6fe0866014486736cc3ba1c6fd4606d3dbe55c9c ]

Use spin_lock_irqsave and spin_unlock_irqrestore instead of spin_lock
and spin_unlock in mtk_star_emac driver to avoid spinlock recursion
occurrence that can happen when enabling the DMA interrupts again in
rx/tx poll.

```
BUG: spinlock recursion on CPU#0, swapper/0/0
 lock: 0xffff00000db9cf20, .magic: dead4ead, .owner: swapper/0/0,
    .owner_cpu: 0
CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted
    6.15.0-rc2-next-20250417-00001-gf6a27738686c-dirty #28 PREEMPT
Hardware name: MediaTek MT8365 Open Platform EVK (DT)
Call trace:
 show_stack+0x18/0x24 (C)
 dump_stack_lvl+0x60/0x80
 dump_stack+0x18/0x24
 spin_dump+0x78/0x88
 do_raw_spin_lock+0x11c/0x120
 _raw_spin_lock+0x20/0x2c
 mtk_star_handle_irq+0xc0/0x22c [mtk_star_emac]
 __handle_irq_event_percpu+0x48/0x140
 handle_irq_event+0x4c/0xb0
 handle_fasteoi_irq+0xa0/0x1bc
 handle_irq_desc+0x34/0x58
 generic_handle_domain_irq+0x1c/0x28
 gic_handle_irq+0x4c/0x120
 do_interrupt_handler+0x50/0x84
 el1_interrupt+0x34/0x68
 el1h_64_irq_handler+0x18/0x24
 el1h_64_irq+0x6c/0x70
 regmap_mmio_read32le+0xc/0x20 (P)
 _regmap_bus_reg_read+0x6c/0xac
 _regmap_read+0x60/0xdc
 regmap_read+0x4c/0x80
 mtk_star_rx_poll+0x2f4/0x39c [mtk_star_emac]
 __napi_poll+0x38/0x188
 net_rx_action+0x164/0x2c0
 handle_softirqs+0x100/0x244
 __do_softirq+0x14/0x20
 ____do_softirq+0x10/0x20
 call_on_irq_stack+0x24/0x64
 do_softirq_own_stack+0x1c/0x40
 __irq_exit_rcu+0xd4/0x10c
 irq_exit_rcu+0x10/0x1c
 el1_interrupt+0x38/0x68
 el1h_64_irq_handler+0x18/0x24
 el1h_64_irq+0x6c/0x70
 cpuidle_enter_state+0xac/0x320 (P)
 cpuidle_enter+0x38/0x50
 do_idle+0x1e4/0x260
 cpu_startup_entry+0x34/0x3c
 rest_init+0xdc/0xe0
 console_on_rootfs+0x0/0x6c
 __primary_switched+0x88/0x90
```

Fixes: 0a8bd81fd6aa ("net: ethernet: mtk-star-emac: separate tx/rx handling with two NAPIs")
Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://patch.msgid.link/20250424-mtk_star_emac-fix-spinlock-recursion-issue-v2-1-f3fde2e529d8@collabora.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/mediatek/mtk_star_emac.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/mediatek/mtk_star_emac.c b/drivers/net/ethernet/mediatek/mtk_star_emac.c
index 25989c79c92e6..47a00e02365a2 100644
--- a/drivers/net/ethernet/mediatek/mtk_star_emac.c
+++ b/drivers/net/ethernet/mediatek/mtk_star_emac.c
@@ -1163,6 +1163,7 @@ static int mtk_star_tx_poll(struct napi_struct *napi, int budget)
 	struct net_device *ndev = priv->ndev;
 	unsigned int head = ring->head;
 	unsigned int entry = ring->tail;
+	unsigned long flags;
 
 	while (entry != head && count < (MTK_STAR_RING_NUM_DESCS - 1)) {
 		ret = mtk_star_tx_complete_one(priv);
@@ -1182,9 +1183,9 @@ static int mtk_star_tx_poll(struct napi_struct *napi, int budget)
 		netif_wake_queue(ndev);
 
 	if (napi_complete(napi)) {
-		spin_lock(&priv->lock);
+		spin_lock_irqsave(&priv->lock, flags);
 		mtk_star_enable_dma_irq(priv, false, true);
-		spin_unlock(&priv->lock);
+		spin_unlock_irqrestore(&priv->lock, flags);
 	}
 
 	return 0;
@@ -1341,6 +1342,7 @@ static int mtk_star_rx(struct mtk_star_priv *priv, int budget)
 static int mtk_star_rx_poll(struct napi_struct *napi, int budget)
 {
 	struct mtk_star_priv *priv;
+	unsigned long flags;
 	int work_done = 0;
 
 	priv = container_of(napi, struct mtk_star_priv, rx_napi);
@@ -1348,9 +1350,9 @@ static int mtk_star_rx_poll(struct napi_struct *napi, int budget)
 	work_done = mtk_star_rx(priv, budget);
 	if (work_done < budget) {
 		napi_complete_done(napi, work_done);
-		spin_lock(&priv->lock);
+		spin_lock_irqsave(&priv->lock, flags);
 		mtk_star_enable_dma_irq(priv, true, false);
-		spin_unlock(&priv->lock);
+		spin_unlock_irqrestore(&priv->lock, flags);
 	}
 
 	return work_done;
-- 
2.39.5

[PATCH 6.14 091/183] net: ethernet: mtk-star-emac: rearm interrupts in rx_poll only when advised

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>

[ Upstream commit e54b4db35e201a9173da9cb7abc8377e12abaf87 ]

In mtk_star_rx_poll function, on event processing completion, the
mtk_star_emac driver calls napi_complete_done but ignores its return
code and enable RX DMA interrupts inconditionally. This return code
gives the info if a device should avoid rearming its interrupts or not,
so fix this behaviour by taking it into account.

Fixes: 8c7bd5a454ff ("net: ethernet: mtk-star-emac: new driver")
Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://patch.msgid.link/20250424-mtk_star_emac-fix-spinlock-recursion-issue-v2-2-f3fde2e529d8@collabora.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/mediatek/mtk_star_emac.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/mediatek/mtk_star_emac.c b/drivers/net/ethernet/mediatek/mtk_star_emac.c
index 47a00e02365a2..c2ab87828d858 100644
--- a/drivers/net/ethernet/mediatek/mtk_star_emac.c
+++ b/drivers/net/ethernet/mediatek/mtk_star_emac.c
@@ -1348,8 +1348,7 @@ static int mtk_star_rx_poll(struct napi_struct *napi, int budget)
 	priv = container_of(napi, struct mtk_star_priv, rx_napi);
 
 	work_done = mtk_star_rx(priv, budget);
-	if (work_done < budget) {
-		napi_complete_done(napi, work_done);
+	if (work_done < budget && napi_complete_done(napi, work_done)) {
 		spin_lock_irqsave(&priv->lock, flags);
 		mtk_star_enable_dma_irq(priv, true, false);
 		spin_unlock_irqrestore(&priv->lock, flags);
-- 
2.39.5

[PATCH 6.14 092/183] net: ethernet: mtk_eth_soc: sync mtk_clks_source_name array

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Daniel Golle <daniel@makrotopia.org>

[ Upstream commit 8c47d5753a119f1c986bc3ed92e9178d2624e1e8 ]

When removing the clock bits for clocks which aren't used by the
Ethernet driver their names should also have been removed from the
mtk_clks_source_name array.

Remove them now as enum mtk_clks_map needs to match the
mtk_clks_source_name array so the driver can make sure that all required
clocks are present and correctly name missing clocks.

Fixes: 887b1d1adb2e ("net: ethernet: mtk_eth_soc: drop clocks unused by Ethernet driver")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/d075e706ff1cebc07f9ec666736d0b32782fd487.1745555321.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/mediatek/mtk_eth_soc.c | 4 ----
 1 file changed, 4 deletions(-)

diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
index 477b8732b8609..1365888a4be11 100644
--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
@@ -269,12 +269,8 @@ static const char * const mtk_clks_source_name[] = {
 	"ethwarp_wocpu2",
 	"ethwarp_wocpu1",
 	"ethwarp_wocpu0",
-	"top_usxgmii0_sel",
-	"top_usxgmii1_sel",
 	"top_sgm0_sel",
 	"top_sgm1_sel",
-	"top_xfi_phy0_xtal_sel",
-	"top_xfi_phy1_xtal_sel",
 	"top_eth_gmii_sel",
 	"top_eth_refck_50m_sel",
 	"top_eth_sys_200m_sel",
-- 
2.39.5

[PATCH 6.14 093/183] pds_core: make pdsc_auxbus_dev_del() void

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Shannon Nelson <shannon.nelson@amd.com>

[ Upstream commit e8562da829432d04a0de1830146984c89844f35e ]

Since there really is no useful return, advertising a return value
is rather misleading.  Make pdsc_auxbus_dev_del() a void function.

Link: https://patch.msgid.link/r/20250320194412.67983-2-shannon.nelson@amd.com
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Stable-dep-of: dfd76010f8e8 ("pds_core: remove write-after-free of client_id")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/amd/pds_core/auxbus.c  | 7 +------
 drivers/net/ethernet/amd/pds_core/core.h    | 2 +-
 drivers/net/ethernet/amd/pds_core/devlink.c | 6 ++++--
 3 files changed, 6 insertions(+), 9 deletions(-)

diff --git a/drivers/net/ethernet/amd/pds_core/auxbus.c b/drivers/net/ethernet/amd/pds_core/auxbus.c
index b76a9b7e0aed6..d53b2124b1498 100644
--- a/drivers/net/ethernet/amd/pds_core/auxbus.c
+++ b/drivers/net/ethernet/amd/pds_core/auxbus.c
@@ -172,13 +172,9 @@ static struct pds_auxiliary_dev *pdsc_auxbus_dev_register(struct pdsc *cf,
 	return padev;
 }
 
-int pdsc_auxbus_dev_del(struct pdsc *cf, struct pdsc *pf)
+void pdsc_auxbus_dev_del(struct pdsc *cf, struct pdsc *pf)
 {
 	struct pds_auxiliary_dev *padev;
-	int err = 0;
-
-	if (!cf)
-		return -ENODEV;
 
 	mutex_lock(&pf->config_lock);
 
@@ -192,7 +188,6 @@ int pdsc_auxbus_dev_del(struct pdsc *cf, struct pdsc *pf)
 	pf->vfs[cf->vf_id].padev = NULL;
 
 	mutex_unlock(&pf->config_lock);
-	return err;
 }
 
 int pdsc_auxbus_dev_add(struct pdsc *cf, struct pdsc *pf)
diff --git a/drivers/net/ethernet/amd/pds_core/core.h b/drivers/net/ethernet/amd/pds_core/core.h
index ec637dc4327a5..08b8280437dcf 100644
--- a/drivers/net/ethernet/amd/pds_core/core.h
+++ b/drivers/net/ethernet/amd/pds_core/core.h
@@ -304,7 +304,7 @@ int pdsc_register_notify(struct notifier_block *nb);
 void pdsc_unregister_notify(struct notifier_block *nb);
 void pdsc_notify(unsigned long event, void *data);
 int pdsc_auxbus_dev_add(struct pdsc *cf, struct pdsc *pf);
-int pdsc_auxbus_dev_del(struct pdsc *cf, struct pdsc *pf);
+void pdsc_auxbus_dev_del(struct pdsc *cf, struct pdsc *pf);
 
 void pdsc_process_adminq(struct pdsc_qcq *qcq);
 void pdsc_work_thread(struct work_struct *work);
diff --git a/drivers/net/ethernet/amd/pds_core/devlink.c b/drivers/net/ethernet/amd/pds_core/devlink.c
index ca23cde385e67..48a7c22fe3320 100644
--- a/drivers/net/ethernet/amd/pds_core/devlink.c
+++ b/drivers/net/ethernet/amd/pds_core/devlink.c
@@ -56,8 +56,10 @@ int pdsc_dl_enable_set(struct devlink *dl, u32 id,
 	for (vf_id = 0; vf_id < pdsc->num_vfs; vf_id++) {
 		struct pdsc *vf = pdsc->vfs[vf_id].vf;
 
-		err = ctx->val.vbool ? pdsc_auxbus_dev_add(vf, pdsc) :
-				       pdsc_auxbus_dev_del(vf, pdsc);
+		if (ctx->val.vbool)
+			err = pdsc_auxbus_dev_add(vf, pdsc);
+		else
+			pdsc_auxbus_dev_del(vf, pdsc);
 	}
 
 	return err;
-- 
2.39.5

[PATCH 6.14 094/183] pds_core: specify auxiliary_device to be created

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Shannon Nelson <shannon.nelson@amd.com>

[ Upstream commit b699bdc720c0255d1bb76cecba7382c1f2107af5 ]

In preparation for adding a new auxiliary_device for the PF,
make the vif type an argument to pdsc_auxbus_dev_add().  Pass in
the address of the padev pointer so that the caller can specify
where to save it and keep the mutex usage within the function.

Link: https://patch.msgid.link/r/20250320194412.67983-3-shannon.nelson@amd.com
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Stable-dep-of: dfd76010f8e8 ("pds_core: remove write-after-free of client_id")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/amd/pds_core/auxbus.c  | 37 ++++++++++-----------
 drivers/net/ethernet/amd/pds_core/core.h    |  7 ++--
 drivers/net/ethernet/amd/pds_core/devlink.c |  5 +--
 drivers/net/ethernet/amd/pds_core/main.c    | 11 +++---
 4 files changed, 33 insertions(+), 27 deletions(-)

diff --git a/drivers/net/ethernet/amd/pds_core/auxbus.c b/drivers/net/ethernet/amd/pds_core/auxbus.c
index d53b2124b1498..4d3387bebe6a4 100644
--- a/drivers/net/ethernet/amd/pds_core/auxbus.c
+++ b/drivers/net/ethernet/amd/pds_core/auxbus.c
@@ -172,29 +172,32 @@ static struct pds_auxiliary_dev *pdsc_auxbus_dev_register(struct pdsc *cf,
 	return padev;
 }
 
-void pdsc_auxbus_dev_del(struct pdsc *cf, struct pdsc *pf)
+void pdsc_auxbus_dev_del(struct pdsc *cf, struct pdsc *pf,
+			 struct pds_auxiliary_dev **pd_ptr)
 {
 	struct pds_auxiliary_dev *padev;
 
+	if (!*pd_ptr)
+		return;
+
 	mutex_lock(&pf->config_lock);
 
-	padev = pf->vfs[cf->vf_id].padev;
-	if (padev) {
-		pds_client_unregister(pf, padev->client_id);
-		auxiliary_device_delete(&padev->aux_dev);
-		auxiliary_device_uninit(&padev->aux_dev);
-		padev->client_id = 0;
-	}
-	pf->vfs[cf->vf_id].padev = NULL;
+	padev = *pd_ptr;
+	pds_client_unregister(pf, padev->client_id);
+	auxiliary_device_delete(&padev->aux_dev);
+	auxiliary_device_uninit(&padev->aux_dev);
+	padev->client_id = 0;
+	*pd_ptr = NULL;
 
 	mutex_unlock(&pf->config_lock);
 }
 
-int pdsc_auxbus_dev_add(struct pdsc *cf, struct pdsc *pf)
+int pdsc_auxbus_dev_add(struct pdsc *cf, struct pdsc *pf,
+			enum pds_core_vif_types vt,
+			struct pds_auxiliary_dev **pd_ptr)
 {
 	struct pds_auxiliary_dev *padev;
 	char devname[PDS_DEVNAME_LEN];
-	enum pds_core_vif_types vt;
 	unsigned long mask;
 	u16 vt_support;
 	int client_id;
@@ -203,6 +206,9 @@ int pdsc_auxbus_dev_add(struct pdsc *cf, struct pdsc *pf)
 	if (!cf)
 		return -ENODEV;
 
+	if (vt >= PDS_DEV_TYPE_MAX)
+		return -EINVAL;
+
 	mutex_lock(&pf->config_lock);
 
 	mask = BIT_ULL(PDSC_S_FW_DEAD) |
@@ -214,17 +220,10 @@ int pdsc_auxbus_dev_add(struct pdsc *cf, struct pdsc *pf)
 		goto out_unlock;
 	}
 
-	/* We only support vDPA so far, so it is the only one to
-	 * be verified that it is available in the Core device and
-	 * enabled in the devlink param.  In the future this might
-	 * become a loop for several VIF types.
-	 */
-
 	/* Verify that the type is supported and enabled.  It is not
 	 * an error if there is no auxbus device support for this
 	 * VF, it just means something else needs to happen with it.
 	 */
-	vt = PDS_DEV_TYPE_VDPA;
 	vt_support = !!le16_to_cpu(pf->dev_ident.vif_types[vt]);
 	if (!(vt_support &&
 	      pf->viftype_status[vt].supported &&
@@ -250,7 +249,7 @@ int pdsc_auxbus_dev_add(struct pdsc *cf, struct pdsc *pf)
 		err = PTR_ERR(padev);
 		goto out_unlock;
 	}
-	pf->vfs[cf->vf_id].padev = padev;
+	*pd_ptr = padev;
 
 out_unlock:
 	mutex_unlock(&pf->config_lock);
diff --git a/drivers/net/ethernet/amd/pds_core/core.h b/drivers/net/ethernet/amd/pds_core/core.h
index 08b8280437dcf..becd3104473c2 100644
--- a/drivers/net/ethernet/amd/pds_core/core.h
+++ b/drivers/net/ethernet/amd/pds_core/core.h
@@ -303,8 +303,11 @@ void pdsc_health_thread(struct work_struct *work);
 int pdsc_register_notify(struct notifier_block *nb);
 void pdsc_unregister_notify(struct notifier_block *nb);
 void pdsc_notify(unsigned long event, void *data);
-int pdsc_auxbus_dev_add(struct pdsc *cf, struct pdsc *pf);
-void pdsc_auxbus_dev_del(struct pdsc *cf, struct pdsc *pf);
+int pdsc_auxbus_dev_add(struct pdsc *cf, struct pdsc *pf,
+			enum pds_core_vif_types vt,
+			struct pds_auxiliary_dev **pd_ptr);
+void pdsc_auxbus_dev_del(struct pdsc *cf, struct pdsc *pf,
+			 struct pds_auxiliary_dev **pd_ptr);
 
 void pdsc_process_adminq(struct pdsc_qcq *qcq);
 void pdsc_work_thread(struct work_struct *work);
diff --git a/drivers/net/ethernet/amd/pds_core/devlink.c b/drivers/net/ethernet/amd/pds_core/devlink.c
index 48a7c22fe3320..d8dc39da4161f 100644
--- a/drivers/net/ethernet/amd/pds_core/devlink.c
+++ b/drivers/net/ethernet/amd/pds_core/devlink.c
@@ -57,9 +57,10 @@ int pdsc_dl_enable_set(struct devlink *dl, u32 id,
 		struct pdsc *vf = pdsc->vfs[vf_id].vf;
 
 		if (ctx->val.vbool)
-			err = pdsc_auxbus_dev_add(vf, pdsc);
+			err = pdsc_auxbus_dev_add(vf, pdsc, vt_entry->vif_id,
+						  &pdsc->vfs[vf_id].padev);
 		else
-			pdsc_auxbus_dev_del(vf, pdsc);
+			pdsc_auxbus_dev_del(vf, pdsc, &pdsc->vfs[vf_id].padev);
 	}
 
 	return err;
diff --git a/drivers/net/ethernet/amd/pds_core/main.c b/drivers/net/ethernet/amd/pds_core/main.c
index 660268ff95623..a3a68889137b6 100644
--- a/drivers/net/ethernet/amd/pds_core/main.c
+++ b/drivers/net/ethernet/amd/pds_core/main.c
@@ -190,7 +190,8 @@ static int pdsc_init_vf(struct pdsc *vf)
 	devl_unlock(dl);
 
 	pf->vfs[vf->vf_id].vf = vf;
-	err = pdsc_auxbus_dev_add(vf, pf);
+	err = pdsc_auxbus_dev_add(vf, pf, PDS_DEV_TYPE_VDPA,
+				  &pf->vfs[vf->vf_id].padev);
 	if (err) {
 		devl_lock(dl);
 		devl_unregister(dl);
@@ -417,7 +418,7 @@ static void pdsc_remove(struct pci_dev *pdev)
 
 		pf = pdsc_get_pf_struct(pdsc->pdev);
 		if (!IS_ERR(pf)) {
-			pdsc_auxbus_dev_del(pdsc, pf);
+			pdsc_auxbus_dev_del(pdsc, pf, &pf->vfs[pdsc->vf_id].padev);
 			pf->vfs[pdsc->vf_id].vf = NULL;
 		}
 	} else {
@@ -482,7 +483,8 @@ static void pdsc_reset_prepare(struct pci_dev *pdev)
 
 		pf = pdsc_get_pf_struct(pdsc->pdev);
 		if (!IS_ERR(pf))
-			pdsc_auxbus_dev_del(pdsc, pf);
+			pdsc_auxbus_dev_del(pdsc, pf,
+					    &pf->vfs[pdsc->vf_id].padev);
 	}
 
 	pdsc_unmap_bars(pdsc);
@@ -527,7 +529,8 @@ static void pdsc_reset_done(struct pci_dev *pdev)
 
 		pf = pdsc_get_pf_struct(pdsc->pdev);
 		if (!IS_ERR(pf))
-			pdsc_auxbus_dev_add(pdsc, pf);
+			pdsc_auxbus_dev_add(pdsc, pf, PDS_DEV_TYPE_VDPA,
+					    &pf->vfs[pdsc->vf_id].padev);
 	}
 }
 
-- 
2.39.5

[PATCH 6.14 095/183] pds_core: remove write-after-free of client_id

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Shannon Nelson <shannon.nelson@amd.com>

[ Upstream commit dfd76010f8e821b66116dec3c7d90dd2403d1396 ]

A use-after-free error popped up in stress testing:

[Mon Apr 21 21:21:33 2025] BUG: KFENCE: use-after-free write in pdsc_auxbus_dev_del+0xef/0x160 [pds_core]
[Mon Apr 21 21:21:33 2025] Use-after-free write at 0x000000007013ecd1 (in kfence-#47):
[Mon Apr 21 21:21:33 2025]  pdsc_auxbus_dev_del+0xef/0x160 [pds_core]
[Mon Apr 21 21:21:33 2025]  pdsc_remove+0xc0/0x1b0 [pds_core]
[Mon Apr 21 21:21:33 2025]  pci_device_remove+0x24/0x70
[Mon Apr 21 21:21:33 2025]  device_release_driver_internal+0x11f/0x180
[Mon Apr 21 21:21:33 2025]  driver_detach+0x45/0x80
[Mon Apr 21 21:21:33 2025]  bus_remove_driver+0x83/0xe0
[Mon Apr 21 21:21:33 2025]  pci_unregister_driver+0x1a/0x80

The actual device uninit usually happens on a separate thread
scheduled after this code runs, but there is no guarantee of order
of thread execution, so this could be a problem.  There's no
actual need to clear the client_id at this point, so simply
remove the offending code.

Fixes: 10659034c622 ("pds_core: add the aux client API")
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250425203857.71547-1-shannon.nelson@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/amd/pds_core/auxbus.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/net/ethernet/amd/pds_core/auxbus.c b/drivers/net/ethernet/amd/pds_core/auxbus.c
index 4d3387bebe6a4..889a18962270a 100644
--- a/drivers/net/ethernet/amd/pds_core/auxbus.c
+++ b/drivers/net/ethernet/amd/pds_core/auxbus.c
@@ -186,7 +186,6 @@ void pdsc_auxbus_dev_del(struct pdsc *cf, struct pdsc *pf,
 	pds_client_unregister(pf, padev->client_id);
 	auxiliary_device_delete(&padev->aux_dev);
 	auxiliary_device_uninit(&padev->aux_dev);
-	padev->client_id = 0;
 	*pd_ptr = NULL;
 
 	mutex_unlock(&pf->config_lock);
-- 
2.39.5

[PATCH 6.14 096/183] net_sched: drr: Fix double list add in class with netem as child qdisc

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Victor Nogueira <victor@mojatatu.com>

[ Upstream commit f99a3fbf023e20b626be4b0f042463d598050c9a ]

As described in Gerrard's report [1], there are use cases where a netem
child qdisc will make the parent qdisc's enqueue callback reentrant.
In the case of drr, there won't be a UAF, but the code will add the same
classifier to the list twice, which will cause memory corruption.

In addition to checking for qlen being zero, this patch checks whether the
class was already added to the active_list (cl_is_active) before adding
to the list to cover for the reentrant case.

[1] https://lore.kernel.org/netdev/CAHcdcOm+03OD2j6R0=YHKqmy=VgJ8xEOKuP6c7mSgnp-TEJJbw@mail.gmail.com/

Fixes: 37d9cf1a3ce3 ("sched: Fix detection of empty queues in child qdiscs")
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Link: https://patch.msgid.link/20250425220710.3964791-2-victor@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/sched/sch_drr.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/net/sched/sch_drr.c b/net/sched/sch_drr.c
index c69b999fae171..25b77ed0c1f28 100644
--- a/net/sched/sch_drr.c
+++ b/net/sched/sch_drr.c
@@ -35,6 +35,11 @@ struct drr_sched {
 	struct Qdisc_class_hash		clhash;
 };
 
+static bool cl_is_active(struct drr_class *cl)
+{
+	return !list_empty(&cl->alist);
+}
+
 static struct drr_class *drr_find_class(struct Qdisc *sch, u32 classid)
 {
 	struct drr_sched *q = qdisc_priv(sch);
@@ -336,7 +341,6 @@ static int drr_enqueue(struct sk_buff *skb, struct Qdisc *sch,
 	struct drr_sched *q = qdisc_priv(sch);
 	struct drr_class *cl;
 	int err = 0;
-	bool first;
 
 	cl = drr_classify(skb, sch, &err);
 	if (cl == NULL) {
@@ -346,7 +350,6 @@ static int drr_enqueue(struct sk_buff *skb, struct Qdisc *sch,
 		return err;
 	}
 
-	first = !cl->qdisc->q.qlen;
 	err = qdisc_enqueue(skb, cl->qdisc, to_free);
 	if (unlikely(err != NET_XMIT_SUCCESS)) {
 		if (net_xmit_drop_count(err)) {
@@ -356,7 +359,7 @@ static int drr_enqueue(struct sk_buff *skb, struct Qdisc *sch,
 		return err;
 	}
 
-	if (first) {
+	if (!cl_is_active(cl)) {
 		list_add_tail(&cl->alist, &q->active);
 		cl->deficit = cl->quantum;
 	}
-- 
2.39.5

[PATCH 6.14 097/183] net_sched: hfsc: Fix a UAF vulnerability in class with netem as child qdisc

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Victor Nogueira <victor@mojatatu.com>

[ Upstream commit 141d34391abbb315d68556b7c67ad97885407547 ]

As described in Gerrard's report [1], we have a UAF case when an hfsc class
has a netem child qdisc. The crux of the issue is that hfsc is assuming
that checking for cl->qdisc->q.qlen == 0 guarantees that it hasn't inserted
the class in the vttree or eltree (which is not true for the netem
duplicate case).

This patch checks the n_active class variable to make sure that the code
won't insert the class in the vttree or eltree twice, catering for the
reentrant case.

[1] https://lore.kernel.org/netdev/CAHcdcOm+03OD2j6R0=YHKqmy=VgJ8xEOKuP6c7mSgnp-TEJJbw@mail.gmail.com/

Fixes: 37d9cf1a3ce3 ("sched: Fix detection of empty queues in child qdiscs")
Reported-by: Gerrard Tai <gerrard.tai@starlabs.sg>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Link: https://patch.msgid.link/20250425220710.3964791-3-victor@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/sched/sch_hfsc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/sched/sch_hfsc.c b/net/sched/sch_hfsc.c
index 5bb4ab9941d6e..1c857dc95e4f3 100644
--- a/net/sched/sch_hfsc.c
+++ b/net/sched/sch_hfsc.c
@@ -1565,7 +1565,7 @@ hfsc_enqueue(struct sk_buff *skb, struct Qdisc *sch, struct sk_buff **to_free)
 		return err;
 	}
 
-	if (first) {
+	if (first && !cl->cl_nactive) {
 		if (cl->cl_flags & HFSC_RSC)
 			init_ed(cl, len);
 		if (cl->cl_flags & HFSC_FSC)
-- 
2.39.5

[PATCH 6.14 098/183] net_sched: ets: Fix double list add in class with netem as child qdisc

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Victor Nogueira <victor@mojatatu.com>

[ Upstream commit 1a6d0c00fa07972384b0c308c72db091d49988b6 ]

As described in Gerrard's report [1], there are use cases where a netem
child qdisc will make the parent qdisc's enqueue callback reentrant.
In the case of ets, there won't be a UAF, but the code will add the same
classifier to the list twice, which will cause memory corruption.

In addition to checking for qlen being zero, this patch checks whether
the class was already added to the active_list (cl_is_active) before
doing the addition to cater for the reentrant case.

[1] https://lore.kernel.org/netdev/CAHcdcOm+03OD2j6R0=YHKqmy=VgJ8xEOKuP6c7mSgnp-TEJJbw@mail.gmail.com/

Fixes: 37d9cf1a3ce3 ("sched: Fix detection of empty queues in child qdiscs")
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Link: https://patch.msgid.link/20250425220710.3964791-4-victor@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/sched/sch_ets.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/net/sched/sch_ets.c b/net/sched/sch_ets.c
index 516038a441638..9e4cd2cefa8c6 100644
--- a/net/sched/sch_ets.c
+++ b/net/sched/sch_ets.c
@@ -74,6 +74,11 @@ static const struct nla_policy ets_class_policy[TCA_ETS_MAX + 1] = {
 	[TCA_ETS_QUANTA_BAND] = { .type = NLA_U32 },
 };
 
+static bool cl_is_active(struct ets_class *cl)
+{
+	return !list_empty(&cl->alist);
+}
+
 static int ets_quantum_parse(struct Qdisc *sch, const struct nlattr *attr,
 			     unsigned int *quantum,
 			     struct netlink_ext_ack *extack)
@@ -416,7 +421,6 @@ static int ets_qdisc_enqueue(struct sk_buff *skb, struct Qdisc *sch,
 	struct ets_sched *q = qdisc_priv(sch);
 	struct ets_class *cl;
 	int err = 0;
-	bool first;
 
 	cl = ets_classify(skb, sch, &err);
 	if (!cl) {
@@ -426,7 +430,6 @@ static int ets_qdisc_enqueue(struct sk_buff *skb, struct Qdisc *sch,
 		return err;
 	}
 
-	first = !cl->qdisc->q.qlen;
 	err = qdisc_enqueue(skb, cl->qdisc, to_free);
 	if (unlikely(err != NET_XMIT_SUCCESS)) {
 		if (net_xmit_drop_count(err)) {
@@ -436,7 +439,7 @@ static int ets_qdisc_enqueue(struct sk_buff *skb, struct Qdisc *sch,
 		return err;
 	}
 
-	if (first && !ets_class_is_strict(q, cl)) {
+	if (!cl_is_active(cl) && !ets_class_is_strict(q, cl)) {
 		list_add_tail(&cl->alist, &q->active);
 		cl->deficit = cl->quantum;
 	}
-- 
2.39.5

[PATCH 6.14 099/183] net_sched: qfq: Fix double list add in class with netem as child qdisc

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Victor Nogueira <victor@mojatatu.com>

[ Upstream commit f139f37dcdf34b67f5bf92bc8e0f7f6b3ac63aa4 ]

As described in Gerrard's report [1], there are use cases where a netem
child qdisc will make the parent qdisc's enqueue callback reentrant.
In the case of qfq, there won't be a UAF, but the code will add the same
classifier to the list twice, which will cause memory corruption.

This patch checks whether the class was already added to the agg->active
list (cl_is_active) before doing the addition to cater for the reentrant
case.

[1] https://lore.kernel.org/netdev/CAHcdcOm+03OD2j6R0=YHKqmy=VgJ8xEOKuP6c7mSgnp-TEJJbw@mail.gmail.com/

Fixes: 37d9cf1a3ce3 ("sched: Fix detection of empty queues in child qdiscs")
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Link: https://patch.msgid.link/20250425220710.3964791-5-victor@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/sched/sch_qfq.c | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

diff --git a/net/sched/sch_qfq.c b/net/sched/sch_qfq.c
index 6a07cdbdb9e12..faba1501ac2fa 100644
--- a/net/sched/sch_qfq.c
+++ b/net/sched/sch_qfq.c
@@ -202,6 +202,11 @@ struct qfq_sched {
  */
 enum update_reason {enqueue, requeue};
 
+static bool cl_is_active(struct qfq_class *cl)
+{
+	return !list_empty(&cl->alist);
+}
+
 static struct qfq_class *qfq_find_class(struct Qdisc *sch, u32 classid)
 {
 	struct qfq_sched *q = qdisc_priv(sch);
@@ -1214,7 +1219,6 @@ static int qfq_enqueue(struct sk_buff *skb, struct Qdisc *sch,
 	struct qfq_class *cl;
 	struct qfq_aggregate *agg;
 	int err = 0;
-	bool first;
 
 	cl = qfq_classify(skb, sch, &err);
 	if (cl == NULL) {
@@ -1236,7 +1240,6 @@ static int qfq_enqueue(struct sk_buff *skb, struct Qdisc *sch,
 	}
 
 	gso_segs = skb_is_gso(skb) ? skb_shinfo(skb)->gso_segs : 1;
-	first = !cl->qdisc->q.qlen;
 	err = qdisc_enqueue(skb, cl->qdisc, to_free);
 	if (unlikely(err != NET_XMIT_SUCCESS)) {
 		pr_debug("qfq_enqueue: enqueue failed %d\n", err);
@@ -1252,8 +1255,8 @@ static int qfq_enqueue(struct sk_buff *skb, struct Qdisc *sch,
 	++sch->q.qlen;
 
 	agg = cl->agg;
-	/* if the queue was not empty, then done here */
-	if (!first) {
+	/* if the class is active, then done here */
+	if (cl_is_active(cl)) {
 		if (unlikely(skb == cl->qdisc->ops->peek(cl->qdisc)) &&
 		    list_first_entry(&agg->active, struct qfq_class, alist)
 		    == cl && cl->deficit < len)
-- 
2.39.5

[PATCH 6.14 100/183] ice: Dont check device type when checking GNSS presence

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Karol Kolacinski <karol.kolacinski@intel.com>

[ Upstream commit e2c6737e6e82e9991646cd5389391bb6d3572a68 ]

Don't check if the device type is E810T as non-E810T devices can support
GNSS too and PCA9575 check is enough to determine if GNSS is present or
not.

Rename ice_gnss_is_gps_present() to ice_gnss_is_module_present()
because GNSS module supports multiple GNSS providers, not only GPS.

Move functions related to PCA9575 from ice_ptp_hw.c to ice_common.c
to be able to access them when PTP is disabled in the kernel, but GNSS
is enabled.

Remove logical AND with ICE_AQC_LINK_TOPO_NODE_TYPE_M in
ice_get_pca9575_handle(), which has no effect, and reorder device type
checks to check the device_id first, then set other variables.

Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Stable-dep-of: 3ffcd7b657c9 ("ice: fix Get Tx Topology AQ command error on E830")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/ice/ice_common.c | 90 ++++++++++++++++++++
 drivers/net/ethernet/intel/ice/ice_common.h |  2 +
 drivers/net/ethernet/intel/ice/ice_gnss.c   | 29 +++----
 drivers/net/ethernet/intel/ice/ice_gnss.h   |  4 +-
 drivers/net/ethernet/intel/ice/ice_lib.c    |  2 +-
 drivers/net/ethernet/intel/ice/ice_ptp_hw.c | 93 ---------------------
 drivers/net/ethernet/intel/ice/ice_ptp_hw.h |  1 -
 7 files changed, 105 insertions(+), 116 deletions(-)

diff --git a/drivers/net/ethernet/intel/ice/ice_common.c b/drivers/net/ethernet/intel/ice/ice_common.c
index 1e801300310e9..f48cb93e10183 100644
--- a/drivers/net/ethernet/intel/ice/ice_common.c
+++ b/drivers/net/ethernet/intel/ice/ice_common.c
@@ -5765,6 +5765,96 @@ ice_aq_write_i2c(struct ice_hw *hw, struct ice_aqc_link_topo_addr topo_addr,
 	return ice_aq_send_cmd(hw, &desc, NULL, 0, cd);
 }
 
+/**
+ * ice_get_pca9575_handle - find and return the PCA9575 controller
+ * @hw: pointer to the hw struct
+ * @pca9575_handle: GPIO controller's handle
+ *
+ * Find and return the GPIO controller's handle in the netlist.
+ * When found - the value will be cached in the hw structure and following calls
+ * will return cached value.
+ *
+ * Return: 0 on success, -ENXIO when there's no PCA9575 present.
+ */
+int ice_get_pca9575_handle(struct ice_hw *hw, u16 *pca9575_handle)
+{
+	struct ice_aqc_get_link_topo *cmd;
+	struct ice_aq_desc desc;
+	int err;
+	u8 idx;
+
+	/* If handle was read previously return cached value */
+	if (hw->io_expander_handle) {
+		*pca9575_handle = hw->io_expander_handle;
+		return 0;
+	}
+
+#define SW_PCA9575_SFP_TOPO_IDX		2
+#define SW_PCA9575_QSFP_TOPO_IDX	1
+
+	/* Check if the SW IO expander controlling SMA exists in the netlist. */
+	if (hw->device_id == ICE_DEV_ID_E810C_SFP)
+		idx = SW_PCA9575_SFP_TOPO_IDX;
+	else if (hw->device_id == ICE_DEV_ID_E810C_QSFP)
+		idx = SW_PCA9575_QSFP_TOPO_IDX;
+	else
+		return -ENXIO;
+
+	/* If handle was not detected read it from the netlist */
+	ice_fill_dflt_direct_cmd_desc(&desc, ice_aqc_opc_get_link_topo);
+	cmd = &desc.params.get_link_topo;
+	cmd->addr.topo_params.node_type_ctx =
+		ICE_AQC_LINK_TOPO_NODE_TYPE_GPIO_CTRL;
+	cmd->addr.topo_params.index = idx;
+
+	err = ice_aq_send_cmd(hw, &desc, NULL, 0, NULL);
+	if (err)
+		return -ENXIO;
+
+	/* Verify if we found the right IO expander type */
+	if (desc.params.get_link_topo.node_part_num !=
+	    ICE_AQC_GET_LINK_TOPO_NODE_NR_PCA9575)
+		return -ENXIO;
+
+	/* If present save the handle and return it */
+	hw->io_expander_handle =
+		le16_to_cpu(desc.params.get_link_topo.addr.handle);
+	*pca9575_handle = hw->io_expander_handle;
+
+	return 0;
+}
+
+/**
+ * ice_read_pca9575_reg - read the register from the PCA9575 controller
+ * @hw: pointer to the hw struct
+ * @offset: GPIO controller register offset
+ * @data: pointer to data to be read from the GPIO controller
+ *
+ * Return: 0 on success, negative error code otherwise.
+ */
+int ice_read_pca9575_reg(struct ice_hw *hw, u8 offset, u8 *data)
+{
+	struct ice_aqc_link_topo_addr link_topo;
+	__le16 addr;
+	u16 handle;
+	int err;
+
+	memset(&link_topo, 0, sizeof(link_topo));
+
+	err = ice_get_pca9575_handle(hw, &handle);
+	if (err)
+		return err;
+
+	link_topo.handle = cpu_to_le16(handle);
+	link_topo.topo_params.node_type_ctx =
+		FIELD_PREP(ICE_AQC_LINK_TOPO_NODE_CTX_M,
+			   ICE_AQC_LINK_TOPO_NODE_CTX_PROVIDED);
+
+	addr = cpu_to_le16((u16)offset);
+
+	return ice_aq_read_i2c(hw, link_topo, 0, addr, 1, data, NULL);
+}
+
 /**
  * ice_aq_set_gpio
  * @hw: pointer to the hw struct
diff --git a/drivers/net/ethernet/intel/ice/ice_common.h b/drivers/net/ethernet/intel/ice/ice_common.h
index 15ba385437389..54a8692839dd0 100644
--- a/drivers/net/ethernet/intel/ice/ice_common.h
+++ b/drivers/net/ethernet/intel/ice/ice_common.h
@@ -306,5 +306,7 @@ int
 ice_aq_write_i2c(struct ice_hw *hw, struct ice_aqc_link_topo_addr topo_addr,
 		 u16 bus_addr, __le16 addr, u8 params, const u8 *data,
 		 struct ice_sq_cd *cd);
+int ice_get_pca9575_handle(struct ice_hw *hw, u16 *pca9575_handle);
+int ice_read_pca9575_reg(struct ice_hw *hw, u8 offset, u8 *data);
 bool ice_fw_supports_report_dflt_cfg(struct ice_hw *hw);
 #endif /* _ICE_COMMON_H_ */
diff --git a/drivers/net/ethernet/intel/ice/ice_gnss.c b/drivers/net/ethernet/intel/ice/ice_gnss.c
index b2148dbe49b28..6b26290452d48 100644
--- a/drivers/net/ethernet/intel/ice/ice_gnss.c
+++ b/drivers/net/ethernet/intel/ice/ice_gnss.c
@@ -381,32 +381,23 @@ void ice_gnss_exit(struct ice_pf *pf)
 }
 
 /**
- * ice_gnss_is_gps_present - Check if GPS HW is present
+ * ice_gnss_is_module_present - Check if GNSS HW is present
  * @hw: pointer to HW struct
+ *
+ * Return: true when GNSS is present, false otherwise.
  */
-bool ice_gnss_is_gps_present(struct ice_hw *hw)
+bool ice_gnss_is_module_present(struct ice_hw *hw)
 {
-	if (!hw->func_caps.ts_func_info.src_tmr_owned)
-		return false;
+	int err;
+	u8 data;
 
-	if (!ice_is_gps_in_netlist(hw))
+	if (!hw->func_caps.ts_func_info.src_tmr_owned ||
+	    !ice_is_gps_in_netlist(hw))
 		return false;
 
-#if IS_ENABLED(CONFIG_PTP_1588_CLOCK)
-	if (ice_is_e810t(hw)) {
-		int err;
-		u8 data;
-
-		err = ice_read_pca9575_reg(hw, ICE_PCA9575_P0_IN, &data);
-		if (err || !!(data & ICE_P0_GNSS_PRSNT_N))
-			return false;
-	} else {
-		return false;
-	}
-#else
-	if (!ice_is_e810t(hw))
+	err = ice_read_pca9575_reg(hw, ICE_PCA9575_P0_IN, &data);
+	if (err || !!(data & ICE_P0_GNSS_PRSNT_N))
 		return false;
-#endif /* IS_ENABLED(CONFIG_PTP_1588_CLOCK) */
 
 	return true;
 }
diff --git a/drivers/net/ethernet/intel/ice/ice_gnss.h b/drivers/net/ethernet/intel/ice/ice_gnss.h
index 75e567ad70594..15daf603ed7bf 100644
--- a/drivers/net/ethernet/intel/ice/ice_gnss.h
+++ b/drivers/net/ethernet/intel/ice/ice_gnss.h
@@ -37,11 +37,11 @@ struct gnss_serial {
 #if IS_ENABLED(CONFIG_GNSS)
 void ice_gnss_init(struct ice_pf *pf);
 void ice_gnss_exit(struct ice_pf *pf);
-bool ice_gnss_is_gps_present(struct ice_hw *hw);
+bool ice_gnss_is_module_present(struct ice_hw *hw);
 #else
 static inline void ice_gnss_init(struct ice_pf *pf) { }
 static inline void ice_gnss_exit(struct ice_pf *pf) { }
-static inline bool ice_gnss_is_gps_present(struct ice_hw *hw)
+static inline bool ice_gnss_is_module_present(struct ice_hw *hw)
 {
 	return false;
 }
diff --git a/drivers/net/ethernet/intel/ice/ice_lib.c b/drivers/net/ethernet/intel/ice/ice_lib.c
index d0faa087793da..e0785e820d601 100644
--- a/drivers/net/ethernet/intel/ice/ice_lib.c
+++ b/drivers/net/ethernet/intel/ice/ice_lib.c
@@ -3882,7 +3882,7 @@ void ice_init_feature_support(struct ice_pf *pf)
 			ice_set_feature_support(pf, ICE_F_CGU);
 		if (ice_is_clock_mux_in_netlist(&pf->hw))
 			ice_set_feature_support(pf, ICE_F_SMA_CTRL);
-		if (ice_gnss_is_gps_present(&pf->hw))
+		if (ice_gnss_is_module_present(&pf->hw))
 			ice_set_feature_support(pf, ICE_F_GNSS);
 		break;
 	default:
diff --git a/drivers/net/ethernet/intel/ice/ice_ptp_hw.c b/drivers/net/ethernet/intel/ice/ice_ptp_hw.c
index ec91822e92806..53ce40fa2fe6b 100644
--- a/drivers/net/ethernet/intel/ice/ice_ptp_hw.c
+++ b/drivers/net/ethernet/intel/ice/ice_ptp_hw.c
@@ -5315,68 +5315,6 @@ ice_get_phy_tx_tstamp_ready_e810(struct ice_hw *hw, u8 port, u64 *tstamp_ready)
  * to access the extended GPIOs available.
  */
 
-/**
- * ice_get_pca9575_handle
- * @hw: pointer to the hw struct
- * @pca9575_handle: GPIO controller's handle
- *
- * Find and return the GPIO controller's handle in the netlist.
- * When found - the value will be cached in the hw structure and following calls
- * will return cached value
- */
-static int
-ice_get_pca9575_handle(struct ice_hw *hw, u16 *pca9575_handle)
-{
-	struct ice_aqc_get_link_topo *cmd;
-	struct ice_aq_desc desc;
-	int status;
-	u8 idx;
-
-	/* If handle was read previously return cached value */
-	if (hw->io_expander_handle) {
-		*pca9575_handle = hw->io_expander_handle;
-		return 0;
-	}
-
-	/* If handle was not detected read it from the netlist */
-	cmd = &desc.params.get_link_topo;
-	ice_fill_dflt_direct_cmd_desc(&desc, ice_aqc_opc_get_link_topo);
-
-	/* Set node type to GPIO controller */
-	cmd->addr.topo_params.node_type_ctx =
-		(ICE_AQC_LINK_TOPO_NODE_TYPE_M &
-		 ICE_AQC_LINK_TOPO_NODE_TYPE_GPIO_CTRL);
-
-#define SW_PCA9575_SFP_TOPO_IDX		2
-#define SW_PCA9575_QSFP_TOPO_IDX	1
-
-	/* Check if the SW IO expander controlling SMA exists in the netlist. */
-	if (hw->device_id == ICE_DEV_ID_E810C_SFP)
-		idx = SW_PCA9575_SFP_TOPO_IDX;
-	else if (hw->device_id == ICE_DEV_ID_E810C_QSFP)
-		idx = SW_PCA9575_QSFP_TOPO_IDX;
-	else
-		return -EOPNOTSUPP;
-
-	cmd->addr.topo_params.index = idx;
-
-	status = ice_aq_send_cmd(hw, &desc, NULL, 0, NULL);
-	if (status)
-		return -EOPNOTSUPP;
-
-	/* Verify if we found the right IO expander type */
-	if (desc.params.get_link_topo.node_part_num !=
-		ICE_AQC_GET_LINK_TOPO_NODE_NR_PCA9575)
-		return -EOPNOTSUPP;
-
-	/* If present save the handle and return it */
-	hw->io_expander_handle =
-		le16_to_cpu(desc.params.get_link_topo.addr.handle);
-	*pca9575_handle = hw->io_expander_handle;
-
-	return 0;
-}
-
 /**
  * ice_read_sma_ctrl
  * @hw: pointer to the hw struct
@@ -5441,37 +5379,6 @@ int ice_write_sma_ctrl(struct ice_hw *hw, u8 data)
 	return status;
 }
 
-/**
- * ice_read_pca9575_reg
- * @hw: pointer to the hw struct
- * @offset: GPIO controller register offset
- * @data: pointer to data to be read from the GPIO controller
- *
- * Read the register from the GPIO controller
- */
-int ice_read_pca9575_reg(struct ice_hw *hw, u8 offset, u8 *data)
-{
-	struct ice_aqc_link_topo_addr link_topo;
-	__le16 addr;
-	u16 handle;
-	int err;
-
-	memset(&link_topo, 0, sizeof(link_topo));
-
-	err = ice_get_pca9575_handle(hw, &handle);
-	if (err)
-		return err;
-
-	link_topo.handle = cpu_to_le16(handle);
-	link_topo.topo_params.node_type_ctx =
-		FIELD_PREP(ICE_AQC_LINK_TOPO_NODE_CTX_M,
-			   ICE_AQC_LINK_TOPO_NODE_CTX_PROVIDED);
-
-	addr = cpu_to_le16((u16)offset);
-
-	return ice_aq_read_i2c(hw, link_topo, 0, addr, 1, data, NULL);
-}
-
 /**
  * ice_ptp_read_sdp_ac - read SDP available connections section from NVM
  * @hw: pointer to the HW struct
diff --git a/drivers/net/ethernet/intel/ice/ice_ptp_hw.h b/drivers/net/ethernet/intel/ice/ice_ptp_hw.h
index 6779ce120515a..15f048d9b5823 100644
--- a/drivers/net/ethernet/intel/ice/ice_ptp_hw.h
+++ b/drivers/net/ethernet/intel/ice/ice_ptp_hw.h
@@ -395,7 +395,6 @@ int ice_phy_cfg_intr_e82x(struct ice_hw *hw, u8 quad, bool ena, u8 threshold);
 /* E810 family functions */
 int ice_read_sma_ctrl(struct ice_hw *hw, u8 *data);
 int ice_write_sma_ctrl(struct ice_hw *hw, u8 data);
-int ice_read_pca9575_reg(struct ice_hw *hw, u8 offset, u8 *data);
 int ice_ptp_read_sdp_ac(struct ice_hw *hw, __le16 *entries, uint *num_entries);
 int ice_cgu_get_num_pins(struct ice_hw *hw, bool input);
 enum dpll_pin_type ice_cgu_get_pin_type(struct ice_hw *hw, u8 pin, bool input);
-- 
2.39.5

[PATCH 6.14 101/183] ice: Remove unnecessary ice_is_e8xx() functions

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Karol Kolacinski <karol.kolacinski@intel.com>

[ Upstream commit 9973ac9f23a79285d70365c72e98bffdb94a429d ]

Remove unnecessary ice_is_e8xx() functions and PHY model. Instead, use
MAC type where applicable.

Don't check device type in ice_ptp_maybe_trigger_tx_interrupt(), because
in reality it depends on the ready bitmap, which only E810 does not
have.

Call ice_ptp_cfg_phy_interrupt() unconditionally, because all further
function calls check the MAC type anyway and this allows simpler code
in the future with addition of the new MAC types.

Reorder ICE_MAC_* cases in switches in ice_ptp* as in enum ice_mac_type.

Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Stable-dep-of: 3ffcd7b657c9 ("ice: fix Get Tx Topology AQ command error on E830")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/ice/ice.h        |   5 -
 drivers/net/ethernet/intel/ice/ice_common.c | 118 +---------------
 drivers/net/ethernet/intel/ice/ice_common.h |   5 -
 drivers/net/ethernet/intel/ice/ice_ddp.c    |   4 +-
 drivers/net/ethernet/intel/ice/ice_ptp.c    | 133 +++++++++---------
 drivers/net/ethernet/intel/ice/ice_ptp_hw.c | 142 ++++++++++----------
 drivers/net/ethernet/intel/ice/ice_ptp_hw.h |  10 +-
 drivers/net/ethernet/intel/ice/ice_type.h   |   9 --
 8 files changed, 147 insertions(+), 279 deletions(-)

diff --git a/drivers/net/ethernet/intel/ice/ice.h b/drivers/net/ethernet/intel/ice/ice.h
index 71e05d30f0fda..d7b90a77bb49a 100644
--- a/drivers/net/ethernet/intel/ice/ice.h
+++ b/drivers/net/ethernet/intel/ice/ice.h
@@ -1047,10 +1047,5 @@ static inline void ice_clear_rdma_cap(struct ice_pf *pf)
 	clear_bit(ICE_FLAG_RDMA_ENA, pf->flags);
 }
 
-static inline enum ice_phy_model ice_get_phy_model(const struct ice_hw *hw)
-{
-	return hw->ptp.phy_model;
-}
-
 extern const struct xdp_metadata_ops ice_xdp_md_ops;
 #endif /* _ICE_H_ */
diff --git a/drivers/net/ethernet/intel/ice/ice_common.c b/drivers/net/ethernet/intel/ice/ice_common.c
index f48cb93e10183..59df31c2c83f7 100644
--- a/drivers/net/ethernet/intel/ice/ice_common.c
+++ b/drivers/net/ethernet/intel/ice/ice_common.c
@@ -186,7 +186,7 @@ static int ice_set_mac_type(struct ice_hw *hw)
  * ice_is_generic_mac - check if device's mac_type is generic
  * @hw: pointer to the hardware structure
  *
- * Return: true if mac_type is generic (with SBQ support), false if not
+ * Return: true if mac_type is ICE_MAC_GENERIC*, false otherwise.
  */
 bool ice_is_generic_mac(struct ice_hw *hw)
 {
@@ -194,120 +194,6 @@ bool ice_is_generic_mac(struct ice_hw *hw)
 		hw->mac_type == ICE_MAC_GENERIC_3K_E825);
 }
 
-/**
- * ice_is_e810
- * @hw: pointer to the hardware structure
- *
- * returns true if the device is E810 based, false if not.
- */
-bool ice_is_e810(struct ice_hw *hw)
-{
-	return hw->mac_type == ICE_MAC_E810;
-}
-
-/**
- * ice_is_e810t
- * @hw: pointer to the hardware structure
- *
- * returns true if the device is E810T based, false if not.
- */
-bool ice_is_e810t(struct ice_hw *hw)
-{
-	switch (hw->device_id) {
-	case ICE_DEV_ID_E810C_SFP:
-		switch (hw->subsystem_device_id) {
-		case ICE_SUBDEV_ID_E810T:
-		case ICE_SUBDEV_ID_E810T2:
-		case ICE_SUBDEV_ID_E810T3:
-		case ICE_SUBDEV_ID_E810T4:
-		case ICE_SUBDEV_ID_E810T6:
-		case ICE_SUBDEV_ID_E810T7:
-			return true;
-		}
-		break;
-	case ICE_DEV_ID_E810C_QSFP:
-		switch (hw->subsystem_device_id) {
-		case ICE_SUBDEV_ID_E810T2:
-		case ICE_SUBDEV_ID_E810T3:
-		case ICE_SUBDEV_ID_E810T5:
-			return true;
-		}
-		break;
-	default:
-		break;
-	}
-
-	return false;
-}
-
-/**
- * ice_is_e822 - Check if a device is E822 family device
- * @hw: pointer to the hardware structure
- *
- * Return: true if the device is E822 based, false if not.
- */
-bool ice_is_e822(struct ice_hw *hw)
-{
-	switch (hw->device_id) {
-	case ICE_DEV_ID_E822C_BACKPLANE:
-	case ICE_DEV_ID_E822C_QSFP:
-	case ICE_DEV_ID_E822C_SFP:
-	case ICE_DEV_ID_E822C_10G_BASE_T:
-	case ICE_DEV_ID_E822C_SGMII:
-	case ICE_DEV_ID_E822L_BACKPLANE:
-	case ICE_DEV_ID_E822L_SFP:
-	case ICE_DEV_ID_E822L_10G_BASE_T:
-	case ICE_DEV_ID_E822L_SGMII:
-		return true;
-	default:
-		return false;
-	}
-}
-
-/**
- * ice_is_e823
- * @hw: pointer to the hardware structure
- *
- * returns true if the device is E823-L or E823-C based, false if not.
- */
-bool ice_is_e823(struct ice_hw *hw)
-{
-	switch (hw->device_id) {
-	case ICE_DEV_ID_E823L_BACKPLANE:
-	case ICE_DEV_ID_E823L_SFP:
-	case ICE_DEV_ID_E823L_10G_BASE_T:
-	case ICE_DEV_ID_E823L_1GBE:
-	case ICE_DEV_ID_E823L_QSFP:
-	case ICE_DEV_ID_E823C_BACKPLANE:
-	case ICE_DEV_ID_E823C_QSFP:
-	case ICE_DEV_ID_E823C_SFP:
-	case ICE_DEV_ID_E823C_10G_BASE_T:
-	case ICE_DEV_ID_E823C_SGMII:
-		return true;
-	default:
-		return false;
-	}
-}
-
-/**
- * ice_is_e825c - Check if a device is E825C family device
- * @hw: pointer to the hardware structure
- *
- * Return: true if the device is E825-C based, false if not.
- */
-bool ice_is_e825c(struct ice_hw *hw)
-{
-	switch (hw->device_id) {
-	case ICE_DEV_ID_E825C_BACKPLANE:
-	case ICE_DEV_ID_E825C_QSFP:
-	case ICE_DEV_ID_E825C_SFP:
-	case ICE_DEV_ID_E825C_SGMII:
-		return true;
-	default:
-		return false;
-	}
-}
-
 /**
  * ice_is_pf_c827 - check if pf contains c827 phy
  * @hw: pointer to the hw struct
@@ -2409,7 +2295,7 @@ ice_parse_1588_func_caps(struct ice_hw *hw, struct ice_hw_func_caps *func_p,
 	info->tmr_index_owned = ((number & ICE_TS_TMR_IDX_OWND_M) != 0);
 	info->tmr_index_assoc = ((number & ICE_TS_TMR_IDX_ASSOC_M) != 0);
 
-	if (!ice_is_e825c(hw)) {
+	if (hw->mac_type != ICE_MAC_GENERIC_3K_E825) {
 		info->clk_freq = FIELD_GET(ICE_TS_CLK_FREQ_M, number);
 		info->clk_src = ((number & ICE_TS_CLK_SRC_M) != 0);
 	} else {
diff --git a/drivers/net/ethernet/intel/ice/ice_common.h b/drivers/net/ethernet/intel/ice/ice_common.h
index 54a8692839dd0..9b00aa0ddf10e 100644
--- a/drivers/net/ethernet/intel/ice/ice_common.h
+++ b/drivers/net/ethernet/intel/ice/ice_common.h
@@ -131,7 +131,6 @@ int
 ice_aq_manage_mac_write(struct ice_hw *hw, const u8 *mac_addr, u8 flags,
 			struct ice_sq_cd *cd);
 bool ice_is_generic_mac(struct ice_hw *hw);
-bool ice_is_e810(struct ice_hw *hw);
 int ice_clear_pf_cfg(struct ice_hw *hw);
 int
 ice_aq_set_phy_cfg(struct ice_hw *hw, struct ice_port_info *pi,
@@ -276,10 +275,6 @@ ice_stat_update40(struct ice_hw *hw, u32 reg, bool prev_stat_loaded,
 void
 ice_stat_update32(struct ice_hw *hw, u32 reg, bool prev_stat_loaded,
 		  u64 *prev_stat, u64 *cur_stat);
-bool ice_is_e810t(struct ice_hw *hw);
-bool ice_is_e822(struct ice_hw *hw);
-bool ice_is_e823(struct ice_hw *hw);
-bool ice_is_e825c(struct ice_hw *hw);
 int
 ice_sched_query_elem(struct ice_hw *hw, u32 node_teid,
 		     struct ice_aqc_txsched_elem_data *buf);
diff --git a/drivers/net/ethernet/intel/ice/ice_ddp.c b/drivers/net/ethernet/intel/ice/ice_ddp.c
index 03988be03729b..69d5b1a28491d 100644
--- a/drivers/net/ethernet/intel/ice/ice_ddp.c
+++ b/drivers/net/ethernet/intel/ice/ice_ddp.c
@@ -2345,14 +2345,14 @@ ice_get_set_tx_topo(struct ice_hw *hw, u8 *buf, u16 buf_size,
 			cmd->set_flags |= ICE_AQC_TX_TOPO_FLAGS_SRC_RAM |
 					  ICE_AQC_TX_TOPO_FLAGS_LOAD_NEW;
 
-		if (ice_is_e825c(hw))
+		if (hw->mac_type == ICE_MAC_GENERIC_3K_E825)
 			desc.flags |= cpu_to_le16(ICE_AQ_FLAG_RD);
 	} else {
 		ice_fill_dflt_direct_cmd_desc(&desc, ice_aqc_opc_get_tx_topo);
 		cmd->get_flags = ICE_AQC_TX_TOPO_GET_RAM;
 	}
 
-	if (!ice_is_e825c(hw))
+	if (hw->mac_type != ICE_MAC_GENERIC_3K_E825)
 		desc.flags |= cpu_to_le16(ICE_AQ_FLAG_RD);
 
 	status = ice_aq_send_cmd(hw, &desc, buf, buf_size, cd);
diff --git a/drivers/net/ethernet/intel/ice/ice_ptp.c b/drivers/net/ethernet/intel/ice/ice_ptp.c
index a99e0fbd0b8b5..92ce419ff0bcb 100644
--- a/drivers/net/ethernet/intel/ice/ice_ptp.c
+++ b/drivers/net/ethernet/intel/ice/ice_ptp.c
@@ -1318,20 +1318,20 @@ ice_ptp_port_phy_stop(struct ice_ptp_port *ptp_port)
 	struct ice_hw *hw = &pf->hw;
 	int err;
 
-	if (ice_is_e810(hw))
-		return 0;
-
 	mutex_lock(&ptp_port->ps_lock);
 
-	switch (ice_get_phy_model(hw)) {
-	case ICE_PHY_ETH56G:
-		err = ice_stop_phy_timer_eth56g(hw, port, true);
+	switch (hw->mac_type) {
+	case ICE_MAC_E810:
+		err = 0;
 		break;
-	case ICE_PHY_E82X:
+	case ICE_MAC_GENERIC:
 		kthread_cancel_delayed_work_sync(&ptp_port->ov_work);
 
 		err = ice_stop_phy_timer_e82x(hw, port, true);
 		break;
+	case ICE_MAC_GENERIC_3K_E825:
+		err = ice_stop_phy_timer_eth56g(hw, port, true);
+		break;
 	default:
 		err = -ENODEV;
 	}
@@ -1361,19 +1361,16 @@ ice_ptp_port_phy_restart(struct ice_ptp_port *ptp_port)
 	unsigned long flags;
 	int err;
 
-	if (ice_is_e810(hw))
-		return 0;
-
 	if (!ptp_port->link_up)
 		return ice_ptp_port_phy_stop(ptp_port);
 
 	mutex_lock(&ptp_port->ps_lock);
 
-	switch (ice_get_phy_model(hw)) {
-	case ICE_PHY_ETH56G:
-		err = ice_start_phy_timer_eth56g(hw, port);
+	switch (hw->mac_type) {
+	case ICE_MAC_E810:
+		err = 0;
 		break;
-	case ICE_PHY_E82X:
+	case ICE_MAC_GENERIC:
 		/* Start the PHY timer in Vernier mode */
 		kthread_cancel_delayed_work_sync(&ptp_port->ov_work);
 
@@ -1398,6 +1395,9 @@ ice_ptp_port_phy_restart(struct ice_ptp_port *ptp_port)
 		kthread_queue_delayed_work(pf->ptp.kworker, &ptp_port->ov_work,
 					   0);
 		break;
+	case ICE_MAC_GENERIC_3K_E825:
+		err = ice_start_phy_timer_eth56g(hw, port);
+		break;
 	default:
 		err = -ENODEV;
 	}
@@ -1432,12 +1432,13 @@ void ice_ptp_link_change(struct ice_pf *pf, bool linkup)
 	/* Skip HW writes if reset is in progress */
 	if (pf->hw.reset_ongoing)
 		return;
-	switch (ice_get_phy_model(hw)) {
-	case ICE_PHY_E810:
+
+	switch (hw->mac_type) {
+	case ICE_MAC_E810:
 		/* Do not reconfigure E810 PHY */
 		return;
-	case ICE_PHY_ETH56G:
-	case ICE_PHY_E82X:
+	case ICE_MAC_GENERIC:
+	case ICE_MAC_GENERIC_3K_E825:
 		ice_ptp_port_phy_restart(ptp_port);
 		return;
 	default:
@@ -1465,46 +1466,44 @@ static int ice_ptp_cfg_phy_interrupt(struct ice_pf *pf, bool ena, u32 threshold)
 
 	ice_ptp_reset_ts_memory(hw);
 
-	switch (ice_get_phy_model(hw)) {
-	case ICE_PHY_ETH56G: {
-		int port;
+	switch (hw->mac_type) {
+	case ICE_MAC_E810:
+		return 0;
+	case ICE_MAC_GENERIC: {
+		int quad;
 
-		for (port = 0; port < hw->ptp.num_lports; port++) {
+		for (quad = 0; quad < ICE_GET_QUAD_NUM(hw->ptp.num_lports);
+		     quad++) {
 			int err;
 
-			err = ice_phy_cfg_intr_eth56g(hw, port, ena, threshold);
+			err = ice_phy_cfg_intr_e82x(hw, quad, ena, threshold);
 			if (err) {
-				dev_err(dev, "Failed to configure PHY interrupt for port %d, err %d\n",
-					port, err);
+				dev_err(dev, "Failed to configure PHY interrupt for quad %d, err %d\n",
+					quad, err);
 				return err;
 			}
 		}
 
 		return 0;
 	}
-	case ICE_PHY_E82X: {
-		int quad;
+	case ICE_MAC_GENERIC_3K_E825: {
+		int port;
 
-		for (quad = 0; quad < ICE_GET_QUAD_NUM(hw->ptp.num_lports);
-		     quad++) {
+		for (port = 0; port < hw->ptp.num_lports; port++) {
 			int err;
 
-			err = ice_phy_cfg_intr_e82x(hw, quad, ena, threshold);
+			err = ice_phy_cfg_intr_eth56g(hw, port, ena, threshold);
 			if (err) {
-				dev_err(dev, "Failed to configure PHY interrupt for quad %d, err %d\n",
-					quad, err);
+				dev_err(dev, "Failed to configure PHY interrupt for port %d, err %d\n",
+					port, err);
 				return err;
 			}
 		}
 
 		return 0;
 	}
-	case ICE_PHY_E810:
-		return 0;
-	case ICE_PHY_UNSUP:
+	case ICE_MAC_UNKNOWN:
 	default:
-		dev_warn(dev, "%s: Unexpected PHY model %d\n", __func__,
-			 ice_get_phy_model(hw));
 		return -EOPNOTSUPP;
 	}
 }
@@ -1740,7 +1739,7 @@ static int ice_ptp_write_perout(struct ice_hw *hw, unsigned int chan,
 	/* 0. Reset mode & out_en in AUX_OUT */
 	wr32(hw, GLTSYN_AUX_OUT(chan, tmr_idx), 0);
 
-	if (ice_is_e825c(hw)) {
+	if (hw->mac_type == ICE_MAC_GENERIC_3K_E825) {
 		int err;
 
 		/* Enable/disable CGU 1PPS output for E825C */
@@ -1825,7 +1824,7 @@ static int ice_ptp_cfg_perout(struct ice_pf *pf, struct ptp_perout_request *rq,
 		return ice_ptp_write_perout(hw, rq->index, gpio_pin, 0, 0);
 
 	if (strncmp(pf->ptp.pin_desc[pin_desc_idx].name, "1PPS", 64) == 0 &&
-	    period != NSEC_PER_SEC && hw->ptp.phy_model == ICE_PHY_E82X) {
+	    period != NSEC_PER_SEC && hw->mac_type == ICE_MAC_GENERIC) {
 		dev_err(ice_pf_to_dev(pf), "1PPS pin supports only 1 s period\n");
 		return -EOPNOTSUPP;
 	}
@@ -2080,7 +2079,7 @@ ice_ptp_settime64(struct ptp_clock_info *info, const struct timespec64 *ts)
 	/* For Vernier mode on E82X, we need to recalibrate after new settime.
 	 * Start with marking timestamps as invalid.
 	 */
-	if (ice_get_phy_model(hw) == ICE_PHY_E82X) {
+	if (hw->mac_type == ICE_MAC_GENERIC) {
 		err = ice_ptp_clear_phy_offset_ready_e82x(hw);
 		if (err)
 			dev_warn(ice_pf_to_dev(pf), "Failed to mark timestamps as invalid before settime\n");
@@ -2104,7 +2103,7 @@ ice_ptp_settime64(struct ptp_clock_info *info, const struct timespec64 *ts)
 	ice_ptp_enable_all_perout(pf);
 
 	/* Recalibrate and re-enable timestamp blocks for E822/E823 */
-	if (ice_get_phy_model(hw) == ICE_PHY_E82X)
+	if (hw->mac_type == ICE_MAC_GENERIC)
 		ice_ptp_restart_all_phy(pf);
 exit:
 	if (err) {
@@ -2558,7 +2557,7 @@ static void ice_ptp_set_funcs_e82x(struct ice_pf *pf)
 		pf->ptp.info.getcrosststamp = ice_ptp_getcrosststamp_e82x;
 
 #endif /* CONFIG_ICE_HWTS */
-	if (ice_is_e825c(&pf->hw)) {
+	if (pf->hw.mac_type == ICE_MAC_GENERIC_3K_E825) {
 		pf->ptp.ice_pin_desc = ice_pin_desc_e825c;
 		pf->ptp.info.n_pins = ICE_PIN_DESC_ARR_LEN(ice_pin_desc_e825c);
 	} else {
@@ -2646,10 +2645,17 @@ static void ice_ptp_set_caps(struct ice_pf *pf)
 	info->enable = ice_ptp_gpio_enable;
 	info->verify = ice_verify_pin;
 
-	if (ice_is_e810(&pf->hw))
+	switch (pf->hw.mac_type) {
+	case ICE_MAC_E810:
 		ice_ptp_set_funcs_e810(pf);
-	else
+		return;
+	case ICE_MAC_GENERIC:
+	case ICE_MAC_GENERIC_3K_E825:
 		ice_ptp_set_funcs_e82x(pf);
+		return;
+	default:
+		return;
+	}
 }
 
 /**
@@ -2779,7 +2785,7 @@ static void ice_ptp_maybe_trigger_tx_interrupt(struct ice_pf *pf)
 	bool trigger_oicr = false;
 	unsigned int i;
 
-	if (ice_is_e810(hw))
+	if (!pf->ptp.port.tx.has_ready_bitmap)
 		return;
 
 	if (!ice_pf_src_tmr_owned(pf))
@@ -2914,14 +2920,12 @@ static int ice_ptp_rebuild_owner(struct ice_pf *pf)
 	 */
 	ice_ptp_flush_all_tx_tracker(pf);
 
-	if (!ice_is_e810(hw)) {
-		/* Enable quad interrupts */
-		err = ice_ptp_cfg_phy_interrupt(pf, true, 1);
-		if (err)
-			return err;
+	/* Enable quad interrupts */
+	err = ice_ptp_cfg_phy_interrupt(pf, true, 1);
+	if (err)
+		return err;
 
-		ice_ptp_restart_all_phy(pf);
-	}
+	ice_ptp_restart_all_phy(pf);
 
 	/* Re-enable all periodic outputs and external timestamp events */
 	ice_ptp_enable_all_perout(pf);
@@ -2973,8 +2977,9 @@ void ice_ptp_rebuild(struct ice_pf *pf, enum ice_reset_req reset_type)
 
 static bool ice_is_primary(struct ice_hw *hw)
 {
-	return ice_is_e825c(hw) && ice_is_dual(hw) ?
-		!!(hw->dev_caps.nac_topo.mode & ICE_NAC_TOPO_PRIMARY_M) : true;
+	return hw->mac_type == ICE_MAC_GENERIC_3K_E825 && ice_is_dual(hw) ?
+		       !!(hw->dev_caps.nac_topo.mode & ICE_NAC_TOPO_PRIMARY_M) :
+		       true;
 }
 
 static int ice_ptp_setup_adapter(struct ice_pf *pf)
@@ -2992,7 +2997,7 @@ static int ice_ptp_setup_pf(struct ice_pf *pf)
 	struct ice_ptp *ctrl_ptp = ice_get_ctrl_ptp(pf);
 	struct ice_ptp *ptp = &pf->ptp;
 
-	if (WARN_ON(!ctrl_ptp) || ice_get_phy_model(&pf->hw) == ICE_PHY_UNSUP)
+	if (WARN_ON(!ctrl_ptp) || pf->hw.mac_type == ICE_MAC_UNKNOWN)
 		return -ENODEV;
 
 	INIT_LIST_HEAD(&ptp->port.list_node);
@@ -3009,7 +3014,7 @@ static void ice_ptp_cleanup_pf(struct ice_pf *pf)
 {
 	struct ice_ptp *ptp = &pf->ptp;
 
-	if (ice_get_phy_model(&pf->hw) != ICE_PHY_UNSUP) {
+	if (pf->hw.mac_type != ICE_MAC_UNKNOWN) {
 		mutex_lock(&pf->adapter->ports.lock);
 		list_del(&ptp->port.list_node);
 		mutex_unlock(&pf->adapter->ports.lock);
@@ -3136,18 +3141,18 @@ static int ice_ptp_init_port(struct ice_pf *pf, struct ice_ptp_port *ptp_port)
 
 	mutex_init(&ptp_port->ps_lock);
 
-	switch (ice_get_phy_model(hw)) {
-	case ICE_PHY_ETH56G:
-		return ice_ptp_init_tx_eth56g(pf, &ptp_port->tx,
-					      ptp_port->port_num);
-	case ICE_PHY_E810:
+	switch (hw->mac_type) {
+	case ICE_MAC_E810:
 		return ice_ptp_init_tx_e810(pf, &ptp_port->tx);
-	case ICE_PHY_E82X:
+	case ICE_MAC_GENERIC:
 		kthread_init_delayed_work(&ptp_port->ov_work,
 					  ice_ptp_wait_for_offsets);
 
 		return ice_ptp_init_tx_e82x(pf, &ptp_port->tx,
 					    ptp_port->port_num);
+	case ICE_MAC_GENERIC_3K_E825:
+		return ice_ptp_init_tx_eth56g(pf, &ptp_port->tx,
+					      ptp_port->port_num);
 	default:
 		return -ENODEV;
 	}
@@ -3164,8 +3169,8 @@ static int ice_ptp_init_port(struct ice_pf *pf, struct ice_ptp_port *ptp_port)
  */
 static void ice_ptp_init_tx_interrupt_mode(struct ice_pf *pf)
 {
-	switch (ice_get_phy_model(&pf->hw)) {
-	case ICE_PHY_E82X:
+	switch (pf->hw.mac_type) {
+	case ICE_MAC_GENERIC:
 		/* E822 based PHY has the clock owner process the interrupt
 		 * for all ports.
 		 */
diff --git a/drivers/net/ethernet/intel/ice/ice_ptp_hw.c b/drivers/net/ethernet/intel/ice/ice_ptp_hw.c
index 53ce40fa2fe6b..8475d422f1ec4 100644
--- a/drivers/net/ethernet/intel/ice/ice_ptp_hw.c
+++ b/drivers/net/ethernet/intel/ice/ice_ptp_hw.c
@@ -746,7 +746,7 @@ static int ice_init_cgu_e82x(struct ice_hw *hw)
 	int err;
 
 	/* Disable sticky lock detection so lock err reported is accurate */
-	if (ice_is_e825c(hw))
+	if (hw->mac_type == ICE_MAC_GENERIC_3K_E825)
 		err = ice_cfg_cgu_pll_dis_sticky_bits_e825c(hw);
 	else
 		err = ice_cfg_cgu_pll_dis_sticky_bits_e82x(hw);
@@ -756,7 +756,7 @@ static int ice_init_cgu_e82x(struct ice_hw *hw)
 	/* Configure the CGU PLL using the parameters from the function
 	 * capabilities.
 	 */
-	if (ice_is_e825c(hw))
+	if (hw->mac_type == ICE_MAC_GENERIC_3K_E825)
 		err = ice_cfg_cgu_pll_e825c(hw, ts_info->time_ref,
 					    (enum ice_clk_src)ts_info->clk_src);
 	else
@@ -827,8 +827,8 @@ static u32 ice_ptp_tmr_cmd_to_port_reg(struct ice_hw *hw,
 	/* Certain hardware families share the same register values for the
 	 * port register and source timer register.
 	 */
-	switch (ice_get_phy_model(hw)) {
-	case ICE_PHY_E810:
+	switch (hw->mac_type) {
+	case ICE_MAC_E810:
 		return ice_ptp_tmr_cmd_to_src_reg(hw, cmd) & TS_CMD_MASK_E810;
 	default:
 		break;
@@ -2729,10 +2729,7 @@ static void ice_ptp_init_phy_e825(struct ice_hw *hw)
 {
 	struct ice_ptp_hw *ptp = &hw->ptp;
 	struct ice_eth56g_params *params;
-	u32 phy_rev;
-	int err;
 
-	ptp->phy_model = ICE_PHY_ETH56G;
 	params = &ptp->phy.eth56g;
 	params->onestep_ena = false;
 	params->peer_delay = 0;
@@ -2742,9 +2739,6 @@ static void ice_ptp_init_phy_e825(struct ice_hw *hw)
 	ptp->num_lports = params->num_phys * ptp->ports_per_phy;
 
 	ice_sb_access_ena_eth56g(hw, true);
-	err = ice_read_phy_eth56g(hw, hw->pf_id, PHY_REG_REVISION, &phy_rev);
-	if (err || phy_rev != PHY_REVISION_ETH56G)
-		ptp->phy_model = ICE_PHY_UNSUP;
 }
 
 /* E822 family functions
@@ -4792,7 +4786,6 @@ int ice_phy_cfg_intr_e82x(struct ice_hw *hw, u8 quad, bool ena, u8 threshold)
  */
 static void ice_ptp_init_phy_e82x(struct ice_ptp_hw *ptp)
 {
-	ptp->phy_model = ICE_PHY_E82X;
 	ptp->num_lports = 8;
 	ptp->ports_per_phy = 8;
 }
@@ -5445,7 +5438,6 @@ int ice_ptp_read_sdp_ac(struct ice_hw *hw, __le16 *entries, uint *num_entries)
  */
 static void ice_ptp_init_phy_e810(struct ice_ptp_hw *ptp)
 {
-	ptp->phy_model = ICE_PHY_E810;
 	ptp->num_lports = 8;
 	ptp->ports_per_phy = 4;
 
@@ -5454,9 +5446,8 @@ static void ice_ptp_init_phy_e810(struct ice_ptp_hw *ptp)
 
 /* Device agnostic functions
  *
- * The following functions implement shared behavior common to both E822 and
- * E810 devices, possibly calling a device specific implementation where
- * necessary.
+ * The following functions implement shared behavior common to all devices,
+ * possibly calling a device specific implementation where necessary.
  */
 
 /**
@@ -5519,14 +5510,19 @@ void ice_ptp_init_hw(struct ice_hw *hw)
 {
 	struct ice_ptp_hw *ptp = &hw->ptp;
 
-	if (ice_is_e822(hw) || ice_is_e823(hw))
-		ice_ptp_init_phy_e82x(ptp);
-	else if (ice_is_e810(hw))
+	switch (hw->mac_type) {
+	case ICE_MAC_E810:
 		ice_ptp_init_phy_e810(ptp);
-	else if (ice_is_e825c(hw))
+		break;
+	case ICE_MAC_GENERIC:
+		ice_ptp_init_phy_e82x(ptp);
+		break;
+	case ICE_MAC_GENERIC_3K_E825:
 		ice_ptp_init_phy_e825(hw);
-	else
-		ptp->phy_model = ICE_PHY_UNSUP;
+		break;
+	default:
+		return;
+	}
 }
 
 /**
@@ -5547,11 +5543,11 @@ void ice_ptp_init_hw(struct ice_hw *hw)
 static int ice_ptp_write_port_cmd(struct ice_hw *hw, u8 port,
 				  enum ice_ptp_tmr_cmd cmd)
 {
-	switch (ice_get_phy_model(hw)) {
-	case ICE_PHY_ETH56G:
-		return ice_ptp_write_port_cmd_eth56g(hw, port, cmd);
-	case ICE_PHY_E82X:
+	switch (hw->mac_type) {
+	case ICE_MAC_GENERIC:
 		return ice_ptp_write_port_cmd_e82x(hw, port, cmd);
+	case ICE_MAC_GENERIC_3K_E825:
+		return ice_ptp_write_port_cmd_eth56g(hw, port, cmd);
 	default:
 		return -EOPNOTSUPP;
 	}
@@ -5612,8 +5608,8 @@ static int ice_ptp_port_cmd(struct ice_hw *hw, enum ice_ptp_tmr_cmd cmd)
 	u32 port;
 
 	/* PHY models which can program all ports simultaneously */
-	switch (ice_get_phy_model(hw)) {
-	case ICE_PHY_E810:
+	switch (hw->mac_type) {
+	case ICE_MAC_E810:
 		return ice_ptp_port_cmd_e810(hw, cmd);
 	default:
 		break;
@@ -5691,17 +5687,17 @@ int ice_ptp_init_time(struct ice_hw *hw, u64 time)
 
 	/* PHY timers */
 	/* Fill Rx and Tx ports and send msg to PHY */
-	switch (ice_get_phy_model(hw)) {
-	case ICE_PHY_ETH56G:
-		err = ice_ptp_prep_phy_time_eth56g(hw,
-						   (u32)(time & 0xFFFFFFFF));
-		break;
-	case ICE_PHY_E810:
+	switch (hw->mac_type) {
+	case ICE_MAC_E810:
 		err = ice_ptp_prep_phy_time_e810(hw, time & 0xFFFFFFFF);
 		break;
-	case ICE_PHY_E82X:
+	case ICE_MAC_GENERIC:
 		err = ice_ptp_prep_phy_time_e82x(hw, time & 0xFFFFFFFF);
 		break;
+	case ICE_MAC_GENERIC_3K_E825:
+		err = ice_ptp_prep_phy_time_eth56g(hw,
+						   (u32)(time & 0xFFFFFFFF));
+		break;
 	default:
 		err = -EOPNOTSUPP;
 	}
@@ -5737,16 +5733,16 @@ int ice_ptp_write_incval(struct ice_hw *hw, u64 incval)
 	wr32(hw, GLTSYN_SHADJ_L(tmr_idx), lower_32_bits(incval));
 	wr32(hw, GLTSYN_SHADJ_H(tmr_idx), upper_32_bits(incval));
 
-	switch (ice_get_phy_model(hw)) {
-	case ICE_PHY_ETH56G:
-		err = ice_ptp_prep_phy_incval_eth56g(hw, incval);
-		break;
-	case ICE_PHY_E810:
+	switch (hw->mac_type) {
+	case ICE_MAC_E810:
 		err = ice_ptp_prep_phy_incval_e810(hw, incval);
 		break;
-	case ICE_PHY_E82X:
+	case ICE_MAC_GENERIC:
 		err = ice_ptp_prep_phy_incval_e82x(hw, incval);
 		break;
+	case ICE_MAC_GENERIC_3K_E825:
+		err = ice_ptp_prep_phy_incval_eth56g(hw, incval);
+		break;
 	default:
 		err = -EOPNOTSUPP;
 	}
@@ -5806,16 +5802,16 @@ int ice_ptp_adj_clock(struct ice_hw *hw, s32 adj)
 	wr32(hw, GLTSYN_SHADJ_L(tmr_idx), 0);
 	wr32(hw, GLTSYN_SHADJ_H(tmr_idx), adj);
 
-	switch (ice_get_phy_model(hw)) {
-	case ICE_PHY_ETH56G:
-		err = ice_ptp_prep_phy_adj_eth56g(hw, adj);
-		break;
-	case ICE_PHY_E810:
+	switch (hw->mac_type) {
+	case ICE_MAC_E810:
 		err = ice_ptp_prep_phy_adj_e810(hw, adj);
 		break;
-	case ICE_PHY_E82X:
+	case ICE_MAC_GENERIC:
 		err = ice_ptp_prep_phy_adj_e82x(hw, adj);
 		break;
+	case ICE_MAC_GENERIC_3K_E825:
+		err = ice_ptp_prep_phy_adj_eth56g(hw, adj);
+		break;
 	default:
 		err = -EOPNOTSUPP;
 	}
@@ -5839,13 +5835,13 @@ int ice_ptp_adj_clock(struct ice_hw *hw, s32 adj)
  */
 int ice_read_phy_tstamp(struct ice_hw *hw, u8 block, u8 idx, u64 *tstamp)
 {
-	switch (ice_get_phy_model(hw)) {
-	case ICE_PHY_ETH56G:
-		return ice_read_ptp_tstamp_eth56g(hw, block, idx, tstamp);
-	case ICE_PHY_E810:
+	switch (hw->mac_type) {
+	case ICE_MAC_E810:
 		return ice_read_phy_tstamp_e810(hw, block, idx, tstamp);
-	case ICE_PHY_E82X:
+	case ICE_MAC_GENERIC:
 		return ice_read_phy_tstamp_e82x(hw, block, idx, tstamp);
+	case ICE_MAC_GENERIC_3K_E825:
+		return ice_read_ptp_tstamp_eth56g(hw, block, idx, tstamp);
 	default:
 		return -EOPNOTSUPP;
 	}
@@ -5869,13 +5865,13 @@ int ice_read_phy_tstamp(struct ice_hw *hw, u8 block, u8 idx, u64 *tstamp)
  */
 int ice_clear_phy_tstamp(struct ice_hw *hw, u8 block, u8 idx)
 {
-	switch (ice_get_phy_model(hw)) {
-	case ICE_PHY_ETH56G:
-		return ice_clear_ptp_tstamp_eth56g(hw, block, idx);
-	case ICE_PHY_E810:
+	switch (hw->mac_type) {
+	case ICE_MAC_E810:
 		return ice_clear_phy_tstamp_e810(hw, block, idx);
-	case ICE_PHY_E82X:
+	case ICE_MAC_GENERIC:
 		return ice_clear_phy_tstamp_e82x(hw, block, idx);
+	case ICE_MAC_GENERIC_3K_E825:
+		return ice_clear_ptp_tstamp_eth56g(hw, block, idx);
 	default:
 		return -EOPNOTSUPP;
 	}
@@ -5932,14 +5928,14 @@ static int ice_get_pf_c827_idx(struct ice_hw *hw, u8 *idx)
  */
 void ice_ptp_reset_ts_memory(struct ice_hw *hw)
 {
-	switch (ice_get_phy_model(hw)) {
-	case ICE_PHY_ETH56G:
-		ice_ptp_reset_ts_memory_eth56g(hw);
-		break;
-	case ICE_PHY_E82X:
+	switch (hw->mac_type) {
+	case ICE_MAC_GENERIC:
 		ice_ptp_reset_ts_memory_e82x(hw);
 		break;
-	case ICE_PHY_E810:
+	case ICE_MAC_GENERIC_3K_E825:
+		ice_ptp_reset_ts_memory_eth56g(hw);
+		break;
+	case ICE_MAC_E810:
 	default:
 		return;
 	}
@@ -5961,13 +5957,13 @@ int ice_ptp_init_phc(struct ice_hw *hw)
 	/* Clear event err indications for auxiliary pins */
 	(void)rd32(hw, GLTSYN_STAT(src_idx));
 
-	switch (ice_get_phy_model(hw)) {
-	case ICE_PHY_ETH56G:
-		return ice_ptp_init_phc_eth56g(hw);
-	case ICE_PHY_E810:
+	switch (hw->mac_type) {
+	case ICE_MAC_E810:
 		return ice_ptp_init_phc_e810(hw);
-	case ICE_PHY_E82X:
+	case ICE_MAC_GENERIC:
 		return ice_ptp_init_phc_e82x(hw);
+	case ICE_MAC_GENERIC_3K_E825:
+		return ice_ptp_init_phc_eth56g(hw);
 	default:
 		return -EOPNOTSUPP;
 	}
@@ -5986,16 +5982,16 @@ int ice_ptp_init_phc(struct ice_hw *hw)
  */
 int ice_get_phy_tx_tstamp_ready(struct ice_hw *hw, u8 block, u64 *tstamp_ready)
 {
-	switch (ice_get_phy_model(hw)) {
-	case ICE_PHY_ETH56G:
-		return ice_get_phy_tx_tstamp_ready_eth56g(hw, block,
-							  tstamp_ready);
-	case ICE_PHY_E810:
+	switch (hw->mac_type) {
+	case ICE_MAC_E810:
 		return ice_get_phy_tx_tstamp_ready_e810(hw, block,
 							tstamp_ready);
-	case ICE_PHY_E82X:
+	case ICE_MAC_GENERIC:
 		return ice_get_phy_tx_tstamp_ready_e82x(hw, block,
 							tstamp_ready);
+	case ICE_MAC_GENERIC_3K_E825:
+		return ice_get_phy_tx_tstamp_ready_eth56g(hw, block,
+							  tstamp_ready);
 		break;
 	default:
 		return -EOPNOTSUPP;
diff --git a/drivers/net/ethernet/intel/ice/ice_ptp_hw.h b/drivers/net/ethernet/intel/ice/ice_ptp_hw.h
index 15f048d9b5823..6b46794075584 100644
--- a/drivers/net/ethernet/intel/ice/ice_ptp_hw.h
+++ b/drivers/net/ethernet/intel/ice/ice_ptp_hw.h
@@ -430,13 +430,13 @@ int ice_phy_cfg_ptp_1step_eth56g(struct ice_hw *hw, u8 port);
  */
 static inline u64 ice_get_base_incval(struct ice_hw *hw)
 {
-	switch (hw->ptp.phy_model) {
-	case ICE_PHY_ETH56G:
-		return ICE_ETH56G_NOMINAL_INCVAL;
-	case ICE_PHY_E810:
+	switch (hw->mac_type) {
+	case ICE_MAC_E810:
 		return ICE_PTP_NOMINAL_INCVAL_E810;
-	case ICE_PHY_E82X:
+	case ICE_MAC_GENERIC:
 		return ice_e82x_nominal_incval(ice_e82x_time_ref(hw));
+	case ICE_MAC_GENERIC_3K_E825:
+		return ICE_ETH56G_NOMINAL_INCVAL;
 	default:
 		return 0;
 	}
diff --git a/drivers/net/ethernet/intel/ice/ice_type.h b/drivers/net/ethernet/intel/ice/ice_type.h
index 33a1a5934c0d5..0aab21113cc43 100644
--- a/drivers/net/ethernet/intel/ice/ice_type.h
+++ b/drivers/net/ethernet/intel/ice/ice_type.h
@@ -871,14 +871,6 @@ union ice_phy_params {
 	struct ice_eth56g_params eth56g;
 };
 
-/* PHY model */
-enum ice_phy_model {
-	ICE_PHY_UNSUP = -1,
-	ICE_PHY_E810 = 1,
-	ICE_PHY_E82X,
-	ICE_PHY_ETH56G,
-};
-
 /* Global Link Topology */
 enum ice_global_link_topo {
 	ICE_LINK_TOPO_UP_TO_2_LINKS,
@@ -888,7 +880,6 @@ enum ice_global_link_topo {
 };
 
 struct ice_ptp_hw {
-	enum ice_phy_model phy_model;
 	union ice_phy_params phy;
 	u8 num_lports;
 	u8 ports_per_phy;
-- 
2.39.5

[PATCH 6.14 102/183] ice: fix Get Tx Topology AQ command error on E830

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Paul Greenwalt <paul.greenwalt@intel.com>

[ Upstream commit 3ffcd7b657c9d96eb3ffe174449b4248dd7fc6a9 ]

The Get Tx Topology AQ command (opcode 0x0418) has different read flag
requirements depending on the hardware/firmware. For E810, E822, and E823
firmware the read flag must be set, and for newer hardware (E825 and E830)
it must not be set.

This results in failure to configure Tx topology and the following warning
message during probe:

  DDP package does not support Tx scheduling layers switching feature -
  please update to the latest DDP package and try again

The current implementation only handles E825-C but not E830. It is
confusing as we first check ice_is_e825c() and then set the flag in the set
case. Finally, we check ice_is_e825c() again and set the flag for all other
hardware in both the set and get case.

Instead, notice that we always need the read flag for set, but only need
the read flag for get on E810, E822, and E823 firmware. Fix the logic to
check the MAC type and set the read flag in get only on the older devices
which require it.

Fixes: ba1124f58afd ("ice: Add E830 device IDs, MAC type and registers")
Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20250425222636.3188441-2-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/ice/ice_ddp.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/net/ethernet/intel/ice/ice_ddp.c b/drivers/net/ethernet/intel/ice/ice_ddp.c
index 69d5b1a28491d..59323c019544f 100644
--- a/drivers/net/ethernet/intel/ice/ice_ddp.c
+++ b/drivers/net/ethernet/intel/ice/ice_ddp.c
@@ -2345,15 +2345,15 @@ ice_get_set_tx_topo(struct ice_hw *hw, u8 *buf, u16 buf_size,
 			cmd->set_flags |= ICE_AQC_TX_TOPO_FLAGS_SRC_RAM |
 					  ICE_AQC_TX_TOPO_FLAGS_LOAD_NEW;
 
-		if (hw->mac_type == ICE_MAC_GENERIC_3K_E825)
-			desc.flags |= cpu_to_le16(ICE_AQ_FLAG_RD);
+		desc.flags |= cpu_to_le16(ICE_AQ_FLAG_RD);
 	} else {
 		ice_fill_dflt_direct_cmd_desc(&desc, ice_aqc_opc_get_tx_topo);
 		cmd->get_flags = ICE_AQC_TX_TOPO_GET_RAM;
-	}
 
-	if (hw->mac_type != ICE_MAC_GENERIC_3K_E825)
-		desc.flags |= cpu_to_le16(ICE_AQ_FLAG_RD);
+		if (hw->mac_type == ICE_MAC_E810 ||
+		    hw->mac_type == ICE_MAC_GENERIC)
+			desc.flags |= cpu_to_le16(ICE_AQ_FLAG_RD);
+	}
 
 	status = ice_aq_send_cmd(hw, &desc, buf, buf_size, cd);
 	if (status)
-- 
2.39.5

[PATCH 6.14 103/183] ice: Check VF VSI Pointer Value in ice_vc_add_fdir_fltr()

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Xuanqiang Luo <luoxuanqiang@kylinos.cn>

[ Upstream commit 425c5f266b2edeee0ce16fedd8466410cdcfcfe3 ]

As mentioned in the commit baeb705fd6a7 ("ice: always check VF VSI
pointer values"), we need to perform a null pointer check on the return
value of ice_get_vf_vsi() before using it.

Fixes: 6ebbe97a4881 ("ice: Add a per-VF limit on number of FDIR filters")
Signed-off-by: Xuanqiang Luo <luoxuanqiang@kylinos.cn>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20250425222636.3188441-3-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/ice/ice_virtchnl_fdir.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/net/ethernet/intel/ice/ice_virtchnl_fdir.c b/drivers/net/ethernet/intel/ice/ice_virtchnl_fdir.c
index 9be4bd717512d..f90f545b3144d 100644
--- a/drivers/net/ethernet/intel/ice/ice_virtchnl_fdir.c
+++ b/drivers/net/ethernet/intel/ice/ice_virtchnl_fdir.c
@@ -2097,6 +2097,11 @@ int ice_vc_add_fdir_fltr(struct ice_vf *vf, u8 *msg)
 	pf = vf->pf;
 	dev = ice_pf_to_dev(pf);
 	vf_vsi = ice_get_vf_vsi(vf);
+	if (!vf_vsi) {
+		dev_err(dev, "Can not get FDIR vf_vsi for VF %u\n", vf->vf_id);
+		v_ret = VIRTCHNL_STATUS_ERR_PARAM;
+		goto err_exit;
+	}
 
 #define ICE_VF_MAX_FDIR_FILTERS	128
 	if (!ice_fdir_num_avail_fltr(&pf->hw, vf_vsi) ||
-- 
2.39.5

[PATCH 6.14 104/183] idpf: fix offloads support for encapsulated packets

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Madhu Chittim <madhu.chittim@intel.com>

[ Upstream commit 713dd6c2deca88cba0596b1e2576f7b7a8e5c59e ]

Split offloads into csum, tso and other offloads so that tunneled
packets do not by default have all the offloads enabled.

Stateless offloads for encapsulated packets are not yet supported in
firmware/software but in the driver we were setting the features same as
non encapsulated features.

Fixed naming to clarify CSUM bits are being checked for Tx.

Inherit netdev features to VLAN interfaces as well.

Fixes: 0fe45467a104 ("idpf: add create vport and netdev configuration")
Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Signed-off-by: Madhu Chittim <madhu.chittim@intel.com>
Tested-by: Zachary Goldstein <zachmgoldstein@google.com>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250425222636.3188441-4-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/idpf/idpf.h     | 18 +++----
 drivers/net/ethernet/intel/idpf/idpf_lib.c | 57 ++++++++--------------
 2 files changed, 27 insertions(+), 48 deletions(-)

diff --git a/drivers/net/ethernet/intel/idpf/idpf.h b/drivers/net/ethernet/intel/idpf/idpf.h
index 66544faab710a..aef0e9775a330 100644
--- a/drivers/net/ethernet/intel/idpf/idpf.h
+++ b/drivers/net/ethernet/intel/idpf/idpf.h
@@ -629,13 +629,13 @@ bool idpf_is_capability_ena(struct idpf_adapter *adapter, bool all,
 	VIRTCHNL2_CAP_RX_HSPLIT_AT_L4V4	|\
 	VIRTCHNL2_CAP_RX_HSPLIT_AT_L4V6)
 
-#define IDPF_CAP_RX_CSUM_L4V4 (\
-	VIRTCHNL2_CAP_RX_CSUM_L4_IPV4_TCP	|\
-	VIRTCHNL2_CAP_RX_CSUM_L4_IPV4_UDP)
+#define IDPF_CAP_TX_CSUM_L4V4 (\
+	VIRTCHNL2_CAP_TX_CSUM_L4_IPV4_TCP	|\
+	VIRTCHNL2_CAP_TX_CSUM_L4_IPV4_UDP)
 
-#define IDPF_CAP_RX_CSUM_L4V6 (\
-	VIRTCHNL2_CAP_RX_CSUM_L4_IPV6_TCP	|\
-	VIRTCHNL2_CAP_RX_CSUM_L4_IPV6_UDP)
+#define IDPF_CAP_TX_CSUM_L4V6 (\
+	VIRTCHNL2_CAP_TX_CSUM_L4_IPV6_TCP	|\
+	VIRTCHNL2_CAP_TX_CSUM_L4_IPV6_UDP)
 
 #define IDPF_CAP_RX_CSUM (\
 	VIRTCHNL2_CAP_RX_CSUM_L3_IPV4		|\
@@ -644,11 +644,9 @@ bool idpf_is_capability_ena(struct idpf_adapter *adapter, bool all,
 	VIRTCHNL2_CAP_RX_CSUM_L4_IPV6_TCP	|\
 	VIRTCHNL2_CAP_RX_CSUM_L4_IPV6_UDP)
 
-#define IDPF_CAP_SCTP_CSUM (\
+#define IDPF_CAP_TX_SCTP_CSUM (\
 	VIRTCHNL2_CAP_TX_CSUM_L4_IPV4_SCTP	|\
-	VIRTCHNL2_CAP_TX_CSUM_L4_IPV6_SCTP	|\
-	VIRTCHNL2_CAP_RX_CSUM_L4_IPV4_SCTP	|\
-	VIRTCHNL2_CAP_RX_CSUM_L4_IPV6_SCTP)
+	VIRTCHNL2_CAP_TX_CSUM_L4_IPV6_SCTP)
 
 #define IDPF_CAP_TUNNEL_TX_CSUM (\
 	VIRTCHNL2_CAP_TX_CSUM_L3_SINGLE_TUNNEL	|\
diff --git a/drivers/net/ethernet/intel/idpf/idpf_lib.c b/drivers/net/ethernet/intel/idpf/idpf_lib.c
index a055a47449f12..78951d62f6171 100644
--- a/drivers/net/ethernet/intel/idpf/idpf_lib.c
+++ b/drivers/net/ethernet/intel/idpf/idpf_lib.c
@@ -703,8 +703,10 @@ static int idpf_cfg_netdev(struct idpf_vport *vport)
 {
 	struct idpf_adapter *adapter = vport->adapter;
 	struct idpf_vport_config *vport_config;
+	netdev_features_t other_offloads = 0;
+	netdev_features_t csum_offloads = 0;
+	netdev_features_t tso_offloads = 0;
 	netdev_features_t dflt_features;
-	netdev_features_t offloads = 0;
 	struct idpf_netdev_priv *np;
 	struct net_device *netdev;
 	u16 idx = vport->idx;
@@ -766,53 +768,32 @@ static int idpf_cfg_netdev(struct idpf_vport *vport)
 
 	if (idpf_is_cap_ena_all(adapter, IDPF_RSS_CAPS, IDPF_CAP_RSS))
 		dflt_features |= NETIF_F_RXHASH;
-	if (idpf_is_cap_ena_all(adapter, IDPF_CSUM_CAPS, IDPF_CAP_RX_CSUM_L4V4))
-		dflt_features |= NETIF_F_IP_CSUM;
-	if (idpf_is_cap_ena_all(adapter, IDPF_CSUM_CAPS, IDPF_CAP_RX_CSUM_L4V6))
-		dflt_features |= NETIF_F_IPV6_CSUM;
+	if (idpf_is_cap_ena_all(adapter, IDPF_CSUM_CAPS, IDPF_CAP_TX_CSUM_L4V4))
+		csum_offloads |= NETIF_F_IP_CSUM;
+	if (idpf_is_cap_ena_all(adapter, IDPF_CSUM_CAPS, IDPF_CAP_TX_CSUM_L4V6))
+		csum_offloads |= NETIF_F_IPV6_CSUM;
 	if (idpf_is_cap_ena(adapter, IDPF_CSUM_CAPS, IDPF_CAP_RX_CSUM))
-		dflt_features |= NETIF_F_RXCSUM;
-	if (idpf_is_cap_ena_all(adapter, IDPF_CSUM_CAPS, IDPF_CAP_SCTP_CSUM))
-		dflt_features |= NETIF_F_SCTP_CRC;
+		csum_offloads |= NETIF_F_RXCSUM;
+	if (idpf_is_cap_ena_all(adapter, IDPF_CSUM_CAPS, IDPF_CAP_TX_SCTP_CSUM))
+		csum_offloads |= NETIF_F_SCTP_CRC;
 
 	if (idpf_is_cap_ena(adapter, IDPF_SEG_CAPS, VIRTCHNL2_CAP_SEG_IPV4_TCP))
-		dflt_features |= NETIF_F_TSO;
+		tso_offloads |= NETIF_F_TSO;
 	if (idpf_is_cap_ena(adapter, IDPF_SEG_CAPS, VIRTCHNL2_CAP_SEG_IPV6_TCP))
-		dflt_features |= NETIF_F_TSO6;
+		tso_offloads |= NETIF_F_TSO6;
 	if (idpf_is_cap_ena_all(adapter, IDPF_SEG_CAPS,
 				VIRTCHNL2_CAP_SEG_IPV4_UDP |
 				VIRTCHNL2_CAP_SEG_IPV6_UDP))
-		dflt_features |= NETIF_F_GSO_UDP_L4;
+		tso_offloads |= NETIF_F_GSO_UDP_L4;
 	if (idpf_is_cap_ena_all(adapter, IDPF_RSC_CAPS, IDPF_CAP_RSC))
-		offloads |= NETIF_F_GRO_HW;
-	/* advertise to stack only if offloads for encapsulated packets is
-	 * supported
-	 */
-	if (idpf_is_cap_ena(vport->adapter, IDPF_SEG_CAPS,
-			    VIRTCHNL2_CAP_SEG_TX_SINGLE_TUNNEL)) {
-		offloads |= NETIF_F_GSO_UDP_TUNNEL	|
-			    NETIF_F_GSO_GRE		|
-			    NETIF_F_GSO_GRE_CSUM	|
-			    NETIF_F_GSO_PARTIAL		|
-			    NETIF_F_GSO_UDP_TUNNEL_CSUM	|
-			    NETIF_F_GSO_IPXIP4		|
-			    NETIF_F_GSO_IPXIP6		|
-			    0;
-
-		if (!idpf_is_cap_ena_all(vport->adapter, IDPF_CSUM_CAPS,
-					 IDPF_CAP_TUNNEL_TX_CSUM))
-			netdev->gso_partial_features |=
-				NETIF_F_GSO_UDP_TUNNEL_CSUM;
-
-		netdev->gso_partial_features |= NETIF_F_GSO_GRE_CSUM;
-		offloads |= NETIF_F_TSO_MANGLEID;
-	}
+		other_offloads |= NETIF_F_GRO_HW;
 	if (idpf_is_cap_ena(adapter, IDPF_OTHER_CAPS, VIRTCHNL2_CAP_LOOPBACK))
-		offloads |= NETIF_F_LOOPBACK;
+		other_offloads |= NETIF_F_LOOPBACK;
 
-	netdev->features |= dflt_features;
-	netdev->hw_features |= dflt_features | offloads;
-	netdev->hw_enc_features |= dflt_features | offloads;
+	netdev->features |= dflt_features | csum_offloads | tso_offloads;
+	netdev->hw_features |=  netdev->features | other_offloads;
+	netdev->vlan_features |= netdev->features | other_offloads;
+	netdev->hw_enc_features |= dflt_features | other_offloads;
 	idpf_set_ethtool_ops(netdev);
 	SET_NETDEV_DEV(netdev, &adapter->pdev->dev);
 
-- 
2.39.5

[PATCH 6.14 105/183] scsi: ufs: core: Remove redundant query_complete trace

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Keoseong Park <keosung.park@samsung.com>

[ Upstream commit 0e9693b97a0eee1df7bae33aec207c975fbcbdb8 ]

The query_complete trace was not removed after ufshcd_issue_dev_cmd() was
called from the bsg path, resulting in duplicate output.

Below is an example of the trace:

 ufs-utils-773     [000] .....   218.176933: ufshcd_upiu: query_send: 0000:00:04.0: HDR:16 00 00 1f 00 01 00 00 00 00 00 00, OSF:03 07 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 ufs-utils-773     [000] .....   218.177145: ufshcd_upiu: query_complete: 0000:00:04.0: HDR:36 00 00 1f 00 01 00 00 00 00 00 00, OSF:03 07 00 00 00 00 00 00 00 00 00 08 00 00 00 00
 ufs-utils-773     [000] .....   218.177146: ufshcd_upiu: query_complete: 0000:00:04.0: HDR:36 00 00 1f 00 01 00 00 00 00 00 00, OSF:03 07 00 00 00 00 00 00 00 00 00 08 00 00 00 00

Remove the redundant trace call in the bsg path, preventing duplication.

Signed-off-by: Keoseong Park <keosung.park@samsung.com>
Link: https://lore.kernel.org/r/20250425010605epcms2p67e89b351398832fe0fd547404d3afc65@epcms2p6
Fixes: 71aabb747d5f ("scsi: ufs: core: Reuse exec_dev_cmd")
Reviewed-by: Avri Altman <avri.altman@sandisk.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/ufs/core/ufshcd.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/drivers/ufs/core/ufshcd.c b/drivers/ufs/core/ufshcd.c
index 128e35a848b7b..99e7e4a570f0e 100644
--- a/drivers/ufs/core/ufshcd.c
+++ b/drivers/ufs/core/ufshcd.c
@@ -7201,8 +7201,6 @@ static int ufshcd_issue_devman_upiu_cmd(struct ufs_hba *hba,
 			err = -EINVAL;
 		}
 	}
-	ufshcd_add_query_upiu_trace(hba, err ? UFS_QUERY_ERR : UFS_QUERY_COMP,
-				    (struct utp_upiu_req *)lrbp->ucd_rsp_ptr);
 
 	return err;
 }
-- 
2.39.5

[PATCH 6.14 106/183] drm/xe/guc: Fix capture of steering registers

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: John Harrison <John.C.Harrison@Intel.com>

[ Upstream commit 5e639707ddb8f080fbde805a1bfa6668a1b45298 ]

The list of registers to capture on a GPU hang includes some that
require steering. Unfortunately, the flag to say this was being wiped
to due a missing OR on the assignment of the next flag field.

Fix that.

Fixes: b170d696c1e2 ("drm/xe/guc: Add XE_LP steered register lists")
Cc: Zhanjun Dong <zhanjun.dong@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: "Thomas Hellström" <thomas.hellstrom@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: intel-xe@lists.freedesktop.org
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Zhanjun Dong <zhanjun.dong@intel.com>
Link: https://lore.kernel.org/r/20250417195215.3002210-2-John.C.Harrison@Intel.com
(cherry picked from commit 532da44b54a10d50ebad14a8a02bd0b78ec23e8b)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/xe/xe_guc_capture.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/xe/xe_guc_capture.c b/drivers/gpu/drm/xe/xe_guc_capture.c
index f6d523e4c5feb..9095618648bcb 100644
--- a/drivers/gpu/drm/xe/xe_guc_capture.c
+++ b/drivers/gpu/drm/xe/xe_guc_capture.c
@@ -359,7 +359,7 @@ static void __fill_ext_reg(struct __guc_mmio_reg_descr *ext,
 
 	ext->reg = XE_REG(extlist->reg.__reg.addr);
 	ext->flags = FIELD_PREP(GUC_REGSET_STEERING_NEEDED, 1);
-	ext->flags = FIELD_PREP(GUC_REGSET_STEERING_GROUP, slice_id);
+	ext->flags |= FIELD_PREP(GUC_REGSET_STEERING_GROUP, slice_id);
 	ext->flags |= FIELD_PREP(GUC_REGSET_STEERING_INSTANCE, subslice_id);
 	ext->regname = extlist->name;
 }
-- 
2.39.5

[PATCH 6.14 107/183] pinctrl: qcom: Fix PINGROUP definition for sm8750

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Maulik Shah <maulik.shah@oss.qualcomm.com>

[ Upstream commit 12b8a672d2aa053064151659f49e7310674d42d3 ]

On newer SoCs intr_target_bit position is at 8 instead of 5. Fix it.

Also add missing intr_wakeup_present_bit and intr_wakeup_enable_bit which
enables forwarding of GPIO interrupts to parent PDC interrupt controller.

Fixes: afe9803e3b82 ("pinctrl: qcom: Add sm8750 pinctrl driver")
Signed-off-by: Maulik Shah <maulik.shah@oss.qualcomm.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Melody Olvera <melody.olvera@oss.qualcomm.com>
Link: https://lore.kernel.org/20250429-pinctrl_sm8750-v2-1-87d45dd3bd82@oss.qualcomm.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pinctrl/qcom/pinctrl-sm8750.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/pinctrl/qcom/pinctrl-sm8750.c b/drivers/pinctrl/qcom/pinctrl-sm8750.c
index 1af11cd95fb0e..b94fb4ee0ec38 100644
--- a/drivers/pinctrl/qcom/pinctrl-sm8750.c
+++ b/drivers/pinctrl/qcom/pinctrl-sm8750.c
@@ -46,7 +46,9 @@
 		.out_bit = 1,                                         \
 		.intr_enable_bit = 0,                                 \
 		.intr_status_bit = 0,                                 \
-		.intr_target_bit = 5,                                 \
+		.intr_wakeup_present_bit = 6,                         \
+		.intr_wakeup_enable_bit = 7,                          \
+		.intr_target_bit = 8,                                 \
 		.intr_target_kpss_val = 3,                            \
 		.intr_raw_status_bit = 4,                             \
 		.intr_polarity_bit = 1,                               \
-- 
2.39.5

[PATCH 6.14 108/183] ALSA: ump: Fix buffer overflow at UMP SysEx message conversion

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Takashi Iwai <tiwai@suse.de>

[ Upstream commit 56f1f30e6795b890463d9b20b11e576adf5a2f77 ]

The conversion function from MIDI 1.0 to UMP packet contains an
internal buffer to keep the incoming MIDI bytes, and its size is 4, as
it was supposed to be the max size for a MIDI1 UMP packet data.
However, the implementation overlooked that SysEx is handled in a
different format, and it can be up to 6 bytes, as found in
do_convert_to_ump().  It leads eventually to a buffer overflow, and
may corrupt the memory when a longer SysEx message is received.

The fix is simply to extend the buffer size to 6 to fit with the SysEx
UMP message.

Fixes: 0b5288f5fe63 ("ALSA: ump: Add legacy raw MIDI support")
Reported-by: Argusee <vr@darknavy.com>
Link: https://patch.msgid.link/20250429124845.25128-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/sound/ump_convert.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/include/sound/ump_convert.h b/include/sound/ump_convert.h
index d099ae27f8491..682499b871eac 100644
--- a/include/sound/ump_convert.h
+++ b/include/sound/ump_convert.h
@@ -19,7 +19,7 @@ struct ump_cvt_to_ump_bank {
 /* context for converting from MIDI1 byte stream to UMP packet */
 struct ump_cvt_to_ump {
 	/* MIDI1 intermediate buffer */
-	unsigned char buf[4];
+	unsigned char buf[6]; /* up to 6 bytes for SysEx */
 	int len;
 	int cmd_bytes;
 
-- 
2.39.5

[PATCH 6.14 109/183] nvme-pci: fix queue unquiesce check on slot_reset

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Keith Busch <kbusch@kernel.org>

[ Upstream commit a75401227eeb827b1a162df1aa9d5b33da921c43 ]

A zero return means the reset was successfully scheduled. We don't want
to unquiesce the queues while the reset_work is pending, as that will
just flush out requeued requests to a failed completion.

Fixes: 71a5bb153be104 ("nvme: ensure disabling pairs with unquiesce")
Reported-by: Dhankaran Singh Ajravat <dhankaran@meta.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvme/host/pci.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/nvme/host/pci.c b/drivers/nvme/host/pci.c
index 1dc12784efafc..d49b69565d04c 100644
--- a/drivers/nvme/host/pci.c
+++ b/drivers/nvme/host/pci.c
@@ -3578,7 +3578,7 @@ static pci_ers_result_t nvme_slot_reset(struct pci_dev *pdev)
 
 	dev_info(dev->ctrl.device, "restart after slot reset\n");
 	pci_restore_state(pdev);
-	if (!nvme_try_sched_reset(&dev->ctrl))
+	if (nvme_try_sched_reset(&dev->ctrl))
 		nvme_unquiesce_io_queues(&dev->ctrl);
 	return PCI_ERS_RESULT_RECOVERED;
 }
-- 
2.39.5

[PATCH 6.14 110/183] drm/tests: shmem: Fix memleak

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Maxime Ripard <mripard@kernel.org>

[ Upstream commit 48ccf21fa8dc595c8aa4f1d347b593dcae0727d0 ]

The drm_gem_shmem_test_get_pages_sgt() gets a scatter-gather table using
the drm_gem_shmem_get_sg_table() function and rightfully calls
sg_free_table() on it. However, it's also supposed to kfree() the
returned sg_table, but doesn't.

This leads to a memory leak, reported by kmemleak. Fix it by adding a
kunit action to kfree the sgt when the test ends.

Reported-by: Philipp Stanner <phasta@mailbox.org>
Closes: https://lore.kernel.org/dri-devel/a7655158a6367ac46194d57f4b7433ef0772a73e.camel@mailbox.org/
Fixes: 93032ae634d4 ("drm/test: add a test suite for GEM objects backed by shmem")
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20250408140758.1831333-1-mripard@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/tests/drm_gem_shmem_test.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/gpu/drm/tests/drm_gem_shmem_test.c b/drivers/gpu/drm/tests/drm_gem_shmem_test.c
index fd4215e2f982d..925fbc2cda700 100644
--- a/drivers/gpu/drm/tests/drm_gem_shmem_test.c
+++ b/drivers/gpu/drm/tests/drm_gem_shmem_test.c
@@ -216,6 +216,9 @@ static void drm_gem_shmem_test_get_pages_sgt(struct kunit *test)
 	KUNIT_ASSERT_NOT_ERR_OR_NULL(test, sgt);
 	KUNIT_EXPECT_NULL(test, shmem->sgt);
 
+	ret = kunit_add_action_or_reset(test, kfree_wrapper, sgt);
+	KUNIT_ASSERT_EQ(test, ret, 0);
+
 	ret = kunit_add_action_or_reset(test, sg_free_table_wrapper, sgt);
 	KUNIT_ASSERT_EQ(test, ret, 0);
 
-- 
2.39.5

[PATCH 6.14 111/183] drm/mipi-dbi: Fix blanking for non-16 bit formats

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Russell Cloran <rcloran@gmail.com>

[ Upstream commit 1a8bc0fe8039e1e57f68c4a588f0403d98bfeb1f ]

On r6x2b6x2g6x2 displays not enough blank data is sent to blank the
entire screen. When support for these displays was added, the dirty
function was updated to handle the different amount of data, but
blanking was not, and remained hardcoded as 2 bytes per pixel.

This change applies almost the same algorithm used in the dirty function
to the blank function, but there is no fb available at that point, and
no concern about having to transform any data, so the dbidev pixel
format is always used for calculating the length.

Fixes: 4aebb79021f3 ("drm/mipi-dbi: Add support for DRM_FORMAT_RGB888")
Signed-off-by: Russell Cloran <rcloran@gmail.com>
Link: https://lore.kernel.org/r/20250415053259.79572-1-rcloran@gmail.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/drm_mipi_dbi.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/drm_mipi_dbi.c b/drivers/gpu/drm/drm_mipi_dbi.c
index 34bca75675766..3ea9f23b4f67a 100644
--- a/drivers/gpu/drm/drm_mipi_dbi.c
+++ b/drivers/gpu/drm/drm_mipi_dbi.c
@@ -404,12 +404,16 @@ static void mipi_dbi_blank(struct mipi_dbi_dev *dbidev)
 	u16 height = drm->mode_config.min_height;
 	u16 width = drm->mode_config.min_width;
 	struct mipi_dbi *dbi = &dbidev->dbi;
-	size_t len = width * height * 2;
+	const struct drm_format_info *dst_format;
+	size_t len;
 	int idx;
 
 	if (!drm_dev_enter(drm, &idx))
 		return;
 
+	dst_format = drm_format_info(dbidev->pixel_format);
+	len = drm_format_info_min_pitch(dst_format, 0, width) * height;
+
 	memset(dbidev->tx_buf, 0, len);
 
 	mipi_dbi_set_window_address(dbidev, 0, width - 1, 0, height - 1);
-- 
2.39.5

[PATCH 6.14 112/183] net: dlink: Correct endianness handling of led_mode

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Simon Horman <horms@kernel.org>

[ Upstream commit e7e5ae71831c44d58627a991e603845a2fed2cab ]

As it's name suggests, parse_eeprom() parses EEPROM data.

This is done by reading data, 16 bits at a time as follows:

	for (i = 0; i < 128; i++)
                ((__le16 *) sromdata)[i] = cpu_to_le16(read_eeprom(np, i));

sromdata is at the same memory location as psrom.
And the type of psrom is a pointer to struct t_SROM.

As can be seen in the loop above, data is stored in sromdata, and thus psrom,
as 16-bit little-endian values.

However, the integer fields of t_SROM are host byte order integers.
And in the case of led_mode this leads to a little endian value
being incorrectly treated as host byte order.

Looking at rio_set_led_mode, this does appear to be a bug as that code
masks led_mode with 0x1, 0x2 and 0x8. Logic that would be effected by a
reversed byte order.

This problem would only manifest on big endian hosts.

Found by inspection while investigating a sparse warning
regarding the crc field of t_SROM.

I believe that warning is a false positive. And although I plan
to send a follow-up to use little-endian types for other the integer
fields of PSROM_t I do not believe that will involve any bug fixes.

Compile tested only.

Fixes: c3f45d322cbd ("dl2k: Add support for IP1000A-based cards")
Signed-off-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250425-dlink-led-mode-v1-1-6bae3c36e736@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/dlink/dl2k.c | 2 +-
 drivers/net/ethernet/dlink/dl2k.h | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/dlink/dl2k.c b/drivers/net/ethernet/dlink/dl2k.c
index d0ea926078706..6bf8a7aeef908 100644
--- a/drivers/net/ethernet/dlink/dl2k.c
+++ b/drivers/net/ethernet/dlink/dl2k.c
@@ -352,7 +352,7 @@ parse_eeprom (struct net_device *dev)
 	eth_hw_addr_set(dev, psrom->mac_addr);
 
 	if (np->chip_id == CHIP_IP1000A) {
-		np->led_mode = psrom->led_mode;
+		np->led_mode = le16_to_cpu(psrom->led_mode);
 		return 0;
 	}
 
diff --git a/drivers/net/ethernet/dlink/dl2k.h b/drivers/net/ethernet/dlink/dl2k.h
index 195dc6cfd8955..0e33e2eaae960 100644
--- a/drivers/net/ethernet/dlink/dl2k.h
+++ b/drivers/net/ethernet/dlink/dl2k.h
@@ -335,7 +335,7 @@ typedef struct t_SROM {
 	u16 sub_system_id;	/* 0x06 */
 	u16 pci_base_1;		/* 0x08 (IP1000A only) */
 	u16 pci_base_2;		/* 0x0a (IP1000A only) */
-	u16 led_mode;		/* 0x0c (IP1000A only) */
+	__le16 led_mode;	/* 0x0c (IP1000A only) */
 	u16 reserved1[9];	/* 0x0e-0x1f */
 	u8 mac_addr[6];		/* 0x20-0x25 */
 	u8 reserved2[10];	/* 0x26-0x2f */
-- 
2.39.5

[PATCH 6.14 113/183] net: mdio: mux-meson-gxl: set reversed bit when using internal phy

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Da Xue <da@libre.computer>

[ Upstream commit b23285e93bef729e67519a5209d5b7fde3b4af50 ]

This bit is necessary to receive packets from the internal PHY.
Without this bit set, no activity occurs on the interface.

Normally u-boot sets this bit, but if u-boot is compiled without
net support, the interface will be up but without any activity.
If bit is set once, it will work until the IP is powered down or reset.

The vendor SDK sets this bit along with the PHY_ID bits.

Signed-off-by: Da Xue <da@libre.computer>
Fixes: 9a24e1ff4326 ("net: mdio: add amlogic gxl mdio mux support")
Link: https://patch.msgid.link/20250425192009.1439508-1-da@libre.computer
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/mdio/mdio-mux-meson-gxl.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/mdio/mdio-mux-meson-gxl.c b/drivers/net/mdio/mdio-mux-meson-gxl.c
index 00c66240136b1..3dd12a8c8b03e 100644
--- a/drivers/net/mdio/mdio-mux-meson-gxl.c
+++ b/drivers/net/mdio/mdio-mux-meson-gxl.c
@@ -17,6 +17,7 @@
 #define  REG2_LEDACT		GENMASK(23, 22)
 #define  REG2_LEDLINK		GENMASK(25, 24)
 #define  REG2_DIV4SEL		BIT(27)
+#define  REG2_REVERSED		BIT(28)
 #define  REG2_ADCBYPASS		BIT(30)
 #define  REG2_CLKINSEL		BIT(31)
 #define ETH_REG3		0x4
@@ -65,7 +66,7 @@ static void gxl_enable_internal_mdio(struct gxl_mdio_mux *priv)
 	 * The only constraint is that it must match the one in
 	 * drivers/net/phy/meson-gxl.c to properly match the PHY.
 	 */
-	writel(FIELD_PREP(REG2_PHYID, EPHY_GXL_ID),
+	writel(REG2_REVERSED | FIELD_PREP(REG2_PHYID, EPHY_GXL_ID),
 	       priv->regs + ETH_REG2);
 
 	/* Enable the internal phy */
-- 
2.39.5

[PATCH 6.14 114/183] idpf: fix potential memory leak on kcalloc() failure

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>

[ Upstream commit 8a558cbda51bef09773c72bf74a32047479110c7 ]

In case of failing on rss_data->rss_key allocation the function is
freeing vport without freeing earlier allocated q_vector_idxs. Fix it.

Move from freeing in error branch to goto scheme.

Fixes: d4d558718266 ("idpf: initialize interrupts and enable vport")
Reviewed-by: Pavan Kumar Linga <pavan.kumar.linga@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Suggested-by: Pavan Kumar Linga <pavan.kumar.linga@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/idpf/idpf_lib.c | 19 +++++++++++--------
 1 file changed, 11 insertions(+), 8 deletions(-)

diff --git a/drivers/net/ethernet/intel/idpf/idpf_lib.c b/drivers/net/ethernet/intel/idpf/idpf_lib.c
index 78951d62f6171..6e8a82dae1628 100644
--- a/drivers/net/ethernet/intel/idpf/idpf_lib.c
+++ b/drivers/net/ethernet/intel/idpf/idpf_lib.c
@@ -1112,11 +1112,9 @@ static struct idpf_vport *idpf_vport_alloc(struct idpf_adapter *adapter,
 
 	num_max_q = max(max_q->max_txq, max_q->max_rxq);
 	vport->q_vector_idxs = kcalloc(num_max_q, sizeof(u16), GFP_KERNEL);
-	if (!vport->q_vector_idxs) {
-		kfree(vport);
+	if (!vport->q_vector_idxs)
+		goto free_vport;
 
-		return NULL;
-	}
 	idpf_vport_init(vport, max_q);
 
 	/* This alloc is done separate from the LUT because it's not strictly
@@ -1126,11 +1124,9 @@ static struct idpf_vport *idpf_vport_alloc(struct idpf_adapter *adapter,
 	 */
 	rss_data = &adapter->vport_config[idx]->user_config.rss_data;
 	rss_data->rss_key = kzalloc(rss_data->rss_key_size, GFP_KERNEL);
-	if (!rss_data->rss_key) {
-		kfree(vport);
+	if (!rss_data->rss_key)
+		goto free_vector_idxs;
 
-		return NULL;
-	}
 	/* Initialize default rss key */
 	netdev_rss_key_fill((void *)rss_data->rss_key, rss_data->rss_key_size);
 
@@ -1143,6 +1139,13 @@ static struct idpf_vport *idpf_vport_alloc(struct idpf_adapter *adapter,
 	adapter->next_vport = idpf_get_free_slot(adapter);
 
 	return vport;
+
+free_vector_idxs:
+	kfree(vport->q_vector_idxs);
+free_vport:
+	kfree(vport);
+
+	return NULL;
 }
 
 /**
-- 
2.39.5

[PATCH 6.14 115/183] idpf: protect shutdown from reset

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Larysa Zaremba <larysa.zaremba@intel.com>

[ Upstream commit ed375b182140eeb9c73609b17939c8a29b27489e ]

Before the referenced commit, the shutdown just called idpf_remove(),
this way IDPF_REMOVE_IN_PROG was protecting us from the serv_task
rescheduling reset. Without this flag set the shutdown process is
vulnerable to HW reset or any other triggering conditions (such as
default mailbox being destroyed).

When one of conditions checked in idpf_service_task becomes true,
vc_event_task can be rescheduled during shutdown, this leads to accessing
freed memory e.g. idpf_req_rel_vector_indexes() trying to read
vport->q_vector_idxs. This in turn causes the system to become defunct
during e.g. systemctl kexec.

Considering using IDPF_REMOVE_IN_PROG would lead to more heavy shutdown
process, instead just cancel the serv_task before cancelling
adapter->serv_task before cancelling adapter->vc_event_task to ensure that
reset will not be scheduled while we are doing a shutdown.

Fixes: 4c9106f4906a ("idpf: fix adapter NULL pointer dereference on reboot")
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/idpf/idpf_main.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/ethernet/intel/idpf/idpf_main.c b/drivers/net/ethernet/intel/idpf/idpf_main.c
index bec4a02c53733..b35713036a54a 100644
--- a/drivers/net/ethernet/intel/idpf/idpf_main.c
+++ b/drivers/net/ethernet/intel/idpf/idpf_main.c
@@ -89,6 +89,7 @@ static void idpf_shutdown(struct pci_dev *pdev)
 {
 	struct idpf_adapter *adapter = pci_get_drvdata(pdev);
 
+	cancel_delayed_work_sync(&adapter->serv_task);
 	cancel_delayed_work_sync(&adapter->vc_event_task);
 	idpf_vc_core_deinit(adapter);
 	idpf_deinit_dflt_mbx(adapter);
-- 
2.39.5

[PATCH 6.14 116/183] igc: fix lock order in igc_ptp_reset

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jacob Keller <jacob.e.keller@intel.com>

[ Upstream commit c7d6cb96d5c33b5148f3dc76fcd30a9b8cd9e973 ]

Commit 1a931c4f5e68 ("igc: add lock preventing multiple simultaneous PTM
transactions") added a new mutex to protect concurrent PTM transactions.
This lock is acquired in igc_ptp_reset() in order to ensure the PTM
registers are properly disabled after a device reset.

The flow where the lock is acquired already holds a spinlock, so acquiring
a mutex leads to a sleep-while-locking bug, reported both by smatch,
and the kernel test robot.

The critical section in igc_ptp_reset() does correctly use the
readx_poll_timeout_atomic variants, but the standard PTM flow uses regular
sleeping variants. This makes converting the mutex to a spinlock a bit
tricky.

Instead, re-order the locking in igc_ptp_reset. Acquire the mutex first,
and then the tmreg_lock spinlock. This is safe because there is no other
ordering dependency on these locks, as this is the only place where both
locks were acquired simultaneously. Indeed, any other flow acquiring locks
in that order would be wrong regardless.

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Fixes: 1a931c4f5e68 ("igc: add lock preventing multiple simultaneous PTM transactions")
Link: https://lore.kernel.org/intel-wired-lan/Z_-P-Hc1yxcw0lTB@stanley.mountain/
Link: https://lore.kernel.org/intel-wired-lan/202504211511.f7738f5d-lkp@intel.com/T/#u
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Vitaly Lifshits <vitaly.lifshits@intel.com>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/igc/igc_ptp.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/intel/igc/igc_ptp.c b/drivers/net/ethernet/intel/igc/igc_ptp.c
index 612ed26a29c5d..efc7b30e42113 100644
--- a/drivers/net/ethernet/intel/igc/igc_ptp.c
+++ b/drivers/net/ethernet/intel/igc/igc_ptp.c
@@ -1290,6 +1290,8 @@ void igc_ptp_reset(struct igc_adapter *adapter)
 	/* reset the tstamp_config */
 	igc_ptp_set_timestamp_mode(adapter, &adapter->tstamp_config);
 
+	mutex_lock(&adapter->ptm_lock);
+
 	spin_lock_irqsave(&adapter->tmreg_lock, flags);
 
 	switch (adapter->hw.mac.type) {
@@ -1308,7 +1310,6 @@ void igc_ptp_reset(struct igc_adapter *adapter)
 		if (!igc_is_crosststamp_supported(adapter))
 			break;
 
-		mutex_lock(&adapter->ptm_lock);
 		wr32(IGC_PCIE_DIG_DELAY, IGC_PCIE_DIG_DELAY_DEFAULT);
 		wr32(IGC_PCIE_PHY_DELAY, IGC_PCIE_PHY_DELAY_DEFAULT);
 
@@ -1332,7 +1333,6 @@ void igc_ptp_reset(struct igc_adapter *adapter)
 			netdev_err(adapter->netdev, "Timeout reading IGC_PTM_STAT register\n");
 
 		igc_ptm_reset(hw);
-		mutex_unlock(&adapter->ptm_lock);
 		break;
 	default:
 		/* No work to do. */
@@ -1349,5 +1349,7 @@ void igc_ptp_reset(struct igc_adapter *adapter)
 out:
 	spin_unlock_irqrestore(&adapter->tmreg_lock, flags);
 
+	mutex_unlock(&adapter->ptm_lock);
+
 	wrfl();
 }
-- 
2.39.5

[PATCH 6.14 117/183] net: ethernet: mtk_eth_soc: fix SER panic with 4GB+ RAM

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Chad Monroe <chad@monroe.io>

[ Upstream commit 6e0490fc36cdac696f96e57b61d93b9ae32e0f4c ]

If the mtk_poll_rx() function detects the MTK_RESETTING flag, it will
jump to release_desc and refill the high word of the SDP on the 4GB RFB.
Subsequently, mtk_rx_clean will process an incorrect SDP, leading to a
panic.

Add patch from MediaTek's SDK to resolve this.

Fixes: 2d75891ebc09 ("net: ethernet: mtk_eth_soc: support 36-bit DMA addressing on MT7988")
Link: https://git01.mediatek.com/plugins/gitiles/openwrt/feeds/mtk-openwrt-feeds/+/71f47ea785699c6aa3b922d66c2bdc1a43da25b1
Signed-off-by: Chad Monroe <chad@monroe.io>
Link: https://patch.msgid.link/4adc2aaeb0fb1b9cdc56bf21cf8e7fa328daa345.1745715843.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/mediatek/mtk_eth_soc.c | 14 +++++++++-----
 1 file changed, 9 insertions(+), 5 deletions(-)

diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
index 1365888a4be11..c6d60f1d4f77a 100644
--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
@@ -2202,14 +2202,18 @@ static int mtk_poll_rx(struct napi_struct *napi, int budget,
 		ring->data[idx] = new_data;
 		rxd->rxd1 = (unsigned int)dma_addr;
 release_desc:
+		if (MTK_HAS_CAPS(eth->soc->caps, MTK_36BIT_DMA)) {
+			if (unlikely(dma_addr == DMA_MAPPING_ERROR))
+				addr64 = FIELD_GET(RX_DMA_ADDR64_MASK,
+						   rxd->rxd2);
+			else
+				addr64 = RX_DMA_PREP_ADDR64(dma_addr);
+		}
+
 		if (MTK_HAS_CAPS(eth->soc->caps, MTK_SOC_MT7628))
 			rxd->rxd2 = RX_DMA_LSO;
 		else
-			rxd->rxd2 = RX_DMA_PREP_PLEN0(ring->buf_size);
-
-		if (MTK_HAS_CAPS(eth->soc->caps, MTK_36BIT_DMA) &&
-		    likely(dma_addr != DMA_MAPPING_ERROR))
-			rxd->rxd2 |= RX_DMA_PREP_ADDR64(dma_addr);
+			rxd->rxd2 = RX_DMA_PREP_PLEN0(ring->buf_size) | addr64;
 
 		ring->calc_idx = idx;
 		done++;
-- 
2.39.5

[PATCH 6.14 118/183] net: dsa: felix: fix broken taprio gate states after clock jump

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Vladimir Oltean <vladimir.oltean@nxp.com>

[ Upstream commit 426d487bca38b34f39c483edfc6313a036446b33 ]

Simplest setup to reproduce the issue: connect 2 ports of the
LS1028A-RDB together (eno0 with swp0) and run:

$ ip link set eno0 up && ip link set swp0 up
$ tc qdisc replace dev swp0 parent root handle 100 taprio num_tc 8 \
	queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 map 0 1 2 3 4 5 6 7 \
	base-time 0 sched-entry S 20 300000 sched-entry S 10 200000 \
	sched-entry S 20 300000 sched-entry S 48 200000 \
	sched-entry S 20 300000 sched-entry S 83 200000 \
	sched-entry S 40 300000 sched-entry S 00 200000 flags 2
$ ptp4l -i eno0 -f /etc/linuxptp/configs/gPTP.cfg -m &
$ ptp4l -i swp0 -f /etc/linuxptp/configs/gPTP.cfg -m

One will observe that the PTP state machine on swp0 starts
synchronizing, then it attempts to do a clock step, and after that, it
never fails to recover from the condition below.

ptp4l[82.427]: selected best master clock 00049f.fffe.05f627
ptp4l[82.428]: port 1 (swp0): MASTER to UNCALIBRATED on RS_SLAVE
ptp4l[83.252]: port 1 (swp0): UNCALIBRATED to SLAVE on MASTER_CLOCK_SELECTED
ptp4l[83.886]: rms 4537731277 max 9075462553 freq -18518 +/- 11467 delay   818 +/-   0
ptp4l[84.170]: timed out while polling for tx timestamp
ptp4l[84.171]: increasing tx_timestamp_timeout or increasing kworker priority may correct this issue, but a driver bug likely causes it
ptp4l[84.172]: port 1 (swp0): send peer delay request failed
ptp4l[84.173]: port 1 (swp0): clearing fault immediately
ptp4l[84.269]: port 1 (swp0): SLAVE to LISTENING on INIT_COMPLETE
ptp4l[85.303]: timed out while polling for tx timestamp
ptp4l[84.171]: increasing tx_timestamp_timeout or increasing kworker priority may correct this issue, but a driver bug likely causes it
ptp4l[84.172]: port 1 (swp0): send peer delay request failed
ptp4l[84.173]: port 1 (swp0): clearing fault immediately
ptp4l[84.269]: port 1 (swp0): SLAVE to LISTENING on INIT_COMPLETE
ptp4l[85.303]: timed out while polling for tx timestamp
ptp4l[85.304]: increasing tx_timestamp_timeout or increasing kworker priority may correct this issue, but a driver bug likely causes it
ptp4l[85.305]: port 1 (swp0): send peer delay response failed
ptp4l[85.306]: port 1 (swp0): clearing fault immediately
ptp4l[86.304]: timed out while polling for tx timestamp

A hint is given by the non-zero statistics for dropped packets which
were expecting hardware TX timestamps:

$ ethtool --include-statistics -T swp0
(...)
Statistics:
  tx_pkts: 30
  tx_lost: 11
  tx_err: 0

We know that when PTP clock stepping takes place (from ocelot_ptp_settime64()
or from ocelot_ptp_adjtime()), vsc9959_tas_clock_adjust() is called.

Another interesting hint is that placing an early return in
vsc9959_tas_clock_adjust(), so as to neutralize this function, fixes the
issue and TX timestamps are no longer dropped.

The debugging function written by me and included below is intended to
read the GCL RAM, after the admin schedule became operational, through
the two status registers available for this purpose:
QSYS_GCL_STATUS_REG_1 and QSYS_GCL_STATUS_REG_2.

static void vsc9959_print_tas_gcl(struct ocelot *ocelot)
{
	u32 val, list_length, interval, gate_state;
	int i, err;

	err = read_poll_timeout(ocelot_read, val,
				!(val & QSYS_PARAM_STATUS_REG_8_CONFIG_PENDING),
				10, 100000, false, ocelot, QSYS_PARAM_STATUS_REG_8);
	if (err) {
		dev_err(ocelot->dev,
			"Failed to wait for TAS config pending bit to clear: %pe\n",
			ERR_PTR(err));
		return;
	}

	val = ocelot_read(ocelot, QSYS_PARAM_STATUS_REG_3);
	list_length = QSYS_PARAM_STATUS_REG_3_LIST_LENGTH_X(val);

	dev_info(ocelot->dev, "GCL length: %u\n", list_length);

	for (i = 0; i < list_length; i++) {
		ocelot_rmw(ocelot,
			   QSYS_GCL_STATUS_REG_1_GCL_ENTRY_NUM(i),
			   QSYS_GCL_STATUS_REG_1_GCL_ENTRY_NUM_M,
			   QSYS_GCL_STATUS_REG_1);
		interval = ocelot_read(ocelot, QSYS_GCL_STATUS_REG_2);
		val = ocelot_read(ocelot, QSYS_GCL_STATUS_REG_1);
		gate_state = QSYS_GCL_STATUS_REG_1_GATE_STATE_X(val);

		dev_info(ocelot->dev, "GCL entry %d: states 0x%x interval %u\n",
			 i, gate_state, interval);
	}
}

Calling it from two places: after the initial QSYS_TAS_PARAM_CFG_CTRL_CONFIG_CHANGE
performed by vsc9959_qos_port_tas_set(), and after the one done by
vsc9959_tas_clock_adjust(), I notice the following difference.

>From the tc-taprio process context, where the schedule was initially
configured, the GCL looks like this:

mscc_felix 0000:00:00.5: GCL length: 8
mscc_felix 0000:00:00.5: GCL entry 0: states 0x20 interval 300000
mscc_felix 0000:00:00.5: GCL entry 1: states 0x10 interval 200000
mscc_felix 0000:00:00.5: GCL entry 2: states 0x20 interval 300000
mscc_felix 0000:00:00.5: GCL entry 3: states 0x48 interval 200000
mscc_felix 0000:00:00.5: GCL entry 4: states 0x20 interval 300000
mscc_felix 0000:00:00.5: GCL entry 5: states 0x83 interval 200000
mscc_felix 0000:00:00.5: GCL entry 6: states 0x40 interval 300000
mscc_felix 0000:00:00.5: GCL entry 7: states 0x0 interval 200000

But from the ptp4l clock stepping process context, when the
vsc9959_tas_clock_adjust() hook is called, the GCL RAM of the
operational schedule now looks like this:

mscc_felix 0000:00:00.5: GCL length: 8
mscc_felix 0000:00:00.5: GCL entry 0: states 0x0 interval 0
mscc_felix 0000:00:00.5: GCL entry 1: states 0x0 interval 0
mscc_felix 0000:00:00.5: GCL entry 2: states 0x0 interval 0
mscc_felix 0000:00:00.5: GCL entry 3: states 0x0 interval 0
mscc_felix 0000:00:00.5: GCL entry 4: states 0x0 interval 0
mscc_felix 0000:00:00.5: GCL entry 5: states 0x0 interval 0
mscc_felix 0000:00:00.5: GCL entry 6: states 0x0 interval 0
mscc_felix 0000:00:00.5: GCL entry 7: states 0x0 interval 0

I do not have a formal explanation, just experimental conclusions.
It appears that after triggering QSYS_TAS_PARAM_CFG_CTRL_CONFIG_CHANGE
for a port's TAS, the GCL entry RAM is updated anyway, despite what the
documentation claims: "Specify the time interval in
QSYS::GCL_CFG_REG_2.TIME_INTERVAL. This triggers the actual RAM
write with the gate state and the time interval for the entry number
specified". We don't touch that register (through vsc9959_tas_gcl_set())
from vsc9959_tas_clock_adjust(), yet the GCL RAM is updated anyway.

It seems to be updated with effectively stale memory, which in my
testing can hold a variety of things, including even pieces of the
previously applied schedule, for particular schedule lengths.

As such, in most circumstances it is very difficult to pinpoint this
issue, because the newly updated schedule would "behave strangely",
but ultimately might still pass traffic to some extent, due to some
gate entries still being present in the stale GCL entry RAM. It is easy
to miss.

With the particular schedule given at the beginning, the GCL RAM
"happens" to be reproducibly rewritten with all zeroes, and this is
consistent with what we see: when the time-aware shaper has gate entries
with all gates closed, traffic is dropped on TX, no wonder we can't
retrieve TX timestamps.

Rewriting the GCL entry RAM when reapplying the new base time fixes the
observed issue.

Fixes: 8670dc33f48b ("net: dsa: felix: update base time of time-aware shaper when adjusting PTP time")
Reported-by: Richie Pearn <richard.pearn@nxp.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250426144859.3128352-2-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/dsa/ocelot/felix_vsc9959.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/net/dsa/ocelot/felix_vsc9959.c b/drivers/net/dsa/ocelot/felix_vsc9959.c
index 940f1b71226d6..7b35d24c38d76 100644
--- a/drivers/net/dsa/ocelot/felix_vsc9959.c
+++ b/drivers/net/dsa/ocelot/felix_vsc9959.c
@@ -1543,7 +1543,7 @@ static void vsc9959_tas_clock_adjust(struct ocelot *ocelot)
 	struct tc_taprio_qopt_offload *taprio;
 	struct ocelot_port *ocelot_port;
 	struct timespec64 base_ts;
-	int port;
+	int i, port;
 	u32 val;
 
 	mutex_lock(&ocelot->fwd_domain_lock);
@@ -1575,6 +1575,9 @@ static void vsc9959_tas_clock_adjust(struct ocelot *ocelot)
 			   QSYS_PARAM_CFG_REG_3_BASE_TIME_SEC_MSB_M,
 			   QSYS_PARAM_CFG_REG_3);
 
+		for (i = 0; i < taprio->num_entries; i++)
+			vsc9959_tas_gcl_set(ocelot, i, &taprio->entries[i]);
+
 		ocelot_rmw(ocelot, QSYS_TAS_PARAM_CFG_CTRL_CONFIG_CHANGE,
 			   QSYS_TAS_PARAM_CFG_CTRL_CONFIG_CHANGE,
 			   QSYS_TAS_PARAM_CFG_CTRL);
-- 
2.39.5

[PATCH 6.14 119/183] net: ipv6: fix UDPv6 GSO segmentation with NAT

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Felix Fietkau <nbd@nbd.name>

[ Upstream commit b936a9b8d4a585ccb6d454921c36286bfe63e01d ]

If any address or port is changed, update it in all packets and recalculate
checksum.

Fixes: 9fd1ff5d2ac7 ("udp: Support UDP fraglist GRO/GSO.")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250426153210.14044-1-nbd@nbd.name
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv4/udp_offload.c | 61 +++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 60 insertions(+), 1 deletion(-)

diff --git a/net/ipv4/udp_offload.c b/net/ipv4/udp_offload.c
index ecfca59f31f13..da5d4aea1b591 100644
--- a/net/ipv4/udp_offload.c
+++ b/net/ipv4/udp_offload.c
@@ -247,6 +247,62 @@ static struct sk_buff *__udpv4_gso_segment_list_csum(struct sk_buff *segs)
 	return segs;
 }
 
+static void __udpv6_gso_segment_csum(struct sk_buff *seg,
+				     struct in6_addr *oldip,
+				     const struct in6_addr *newip,
+				     __be16 *oldport, __be16 newport)
+{
+	struct udphdr *uh = udp_hdr(seg);
+
+	if (ipv6_addr_equal(oldip, newip) && *oldport == newport)
+		return;
+
+	if (uh->check) {
+		inet_proto_csum_replace16(&uh->check, seg, oldip->s6_addr32,
+					  newip->s6_addr32, true);
+
+		inet_proto_csum_replace2(&uh->check, seg, *oldport, newport,
+					 false);
+		if (!uh->check)
+			uh->check = CSUM_MANGLED_0;
+	}
+
+	*oldip = *newip;
+	*oldport = newport;
+}
+
+static struct sk_buff *__udpv6_gso_segment_list_csum(struct sk_buff *segs)
+{
+	const struct ipv6hdr *iph;
+	const struct udphdr *uh;
+	struct ipv6hdr *iph2;
+	struct sk_buff *seg;
+	struct udphdr *uh2;
+
+	seg = segs;
+	uh = udp_hdr(seg);
+	iph = ipv6_hdr(seg);
+	uh2 = udp_hdr(seg->next);
+	iph2 = ipv6_hdr(seg->next);
+
+	if (!(*(const u32 *)&uh->source ^ *(const u32 *)&uh2->source) &&
+	    ipv6_addr_equal(&iph->saddr, &iph2->saddr) &&
+	    ipv6_addr_equal(&iph->daddr, &iph2->daddr))
+		return segs;
+
+	while ((seg = seg->next)) {
+		uh2 = udp_hdr(seg);
+		iph2 = ipv6_hdr(seg);
+
+		__udpv6_gso_segment_csum(seg, &iph2->saddr, &iph->saddr,
+					 &uh2->source, uh->source);
+		__udpv6_gso_segment_csum(seg, &iph2->daddr, &iph->daddr,
+					 &uh2->dest, uh->dest);
+	}
+
+	return segs;
+}
+
 static struct sk_buff *__udp_gso_segment_list(struct sk_buff *skb,
 					      netdev_features_t features,
 					      bool is_ipv6)
@@ -259,7 +315,10 @@ static struct sk_buff *__udp_gso_segment_list(struct sk_buff *skb,
 
 	udp_hdr(skb)->len = htons(sizeof(struct udphdr) + mss);
 
-	return is_ipv6 ? skb : __udpv4_gso_segment_list_csum(skb);
+	if (is_ipv6)
+		return __udpv6_gso_segment_list_csum(skb);
+	else
+		return __udpv4_gso_segment_list_csum(skb);
 }
 
 struct sk_buff *__udp_gso_segment(struct sk_buff *gso_skb,
-- 
2.39.5

[PATCH 6.14 120/183] ALSA: hda/realtek: Fix built-mic regression on other ASUS models

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Takashi Iwai <tiwai@suse.de>

[ Upstream commit 4d5b71b487291da9f92e352c0a7e39f256d60db8 ]

A few ASUS models use the ALC256_FIXUP_ASUS_HEADSET_MODE although they
have no built-in mic pin on NID 0x13, as found in the commit
c1732ede5e80 ("ALSA: hda/realtek - Fix headset and mic on several Asus
laptops with ALC256").  This was relatively harmless in the past as
NID 0x13 was assigned as the secondary mic.  But since the fix for the
pin sort order, this pin became the primary one, hence user started
noticing the broken input, and we've fixed already for a few ASUS
models to switch to ALC256_FIXUP_ASUS_MIC_NO_PRESENCE.

This patch corrects the other ASUS models to use the right quirk entry
for fixing the built-in mic regression.  Here we cover X541SA
(1043:12e0), X541UV (1043:12f0), Z550SA (1043:13bf0) and X555UB
(1043:1ccd).

Fixes: 3b4309546b48 ("ALSA: hda: Fix headset detection failure due to unstable sort")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=220058
Link: https://patch.msgid.link/20250430053210.31776-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/pci/hda/patch_realtek.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index 263c7be1d4e29..2ff02fb6f7e94 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -10774,10 +10774,10 @@ static const struct hda_quirk alc269_fixup_tbl[] = {
 	SND_PCI_QUIRK(0x1043, 0x12a3, "Asus N7691ZM", ALC269_FIXUP_ASUS_N7601ZM),
 	SND_PCI_QUIRK(0x1043, 0x12af, "ASUS UX582ZS", ALC245_FIXUP_CS35L41_SPI_2),
 	SND_PCI_QUIRK(0x1043, 0x12b4, "ASUS B3405CCA / P3405CCA", ALC294_FIXUP_ASUS_CS35L41_SPI_2),
-	SND_PCI_QUIRK(0x1043, 0x12e0, "ASUS X541SA", ALC256_FIXUP_ASUS_MIC),
-	SND_PCI_QUIRK(0x1043, 0x12f0, "ASUS X541UV", ALC256_FIXUP_ASUS_MIC),
+	SND_PCI_QUIRK(0x1043, 0x12e0, "ASUS X541SA", ALC256_FIXUP_ASUS_MIC_NO_PRESENCE),
+	SND_PCI_QUIRK(0x1043, 0x12f0, "ASUS X541UV", ALC256_FIXUP_ASUS_MIC_NO_PRESENCE),
 	SND_PCI_QUIRK(0x1043, 0x1313, "Asus K42JZ", ALC269VB_FIXUP_ASUS_MIC_NO_PRESENCE),
-	SND_PCI_QUIRK(0x1043, 0x13b0, "ASUS Z550SA", ALC256_FIXUP_ASUS_MIC),
+	SND_PCI_QUIRK(0x1043, 0x13b0, "ASUS Z550SA", ALC256_FIXUP_ASUS_MIC_NO_PRESENCE),
 	SND_PCI_QUIRK(0x1043, 0x1427, "Asus Zenbook UX31E", ALC269VB_FIXUP_ASUS_ZENBOOK),
 	SND_PCI_QUIRK(0x1043, 0x1433, "ASUS GX650PY/PZ/PV/PU/PYV/PZV/PIV/PVV", ALC285_FIXUP_ASUS_I2C_HEADSET_MIC),
 	SND_PCI_QUIRK(0x1043, 0x1460, "Asus VivoBook 15", ALC256_FIXUP_ASUS_MIC_NO_PRESENCE),
@@ -10831,7 +10831,7 @@ static const struct hda_quirk alc269_fixup_tbl[] = {
 	SND_PCI_QUIRK(0x1043, 0x1c92, "ASUS ROG Strix G15", ALC285_FIXUP_ASUS_G533Z_PINS),
 	SND_PCI_QUIRK(0x1043, 0x1c9f, "ASUS G614JU/JV/JI", ALC285_FIXUP_ASUS_HEADSET_MIC),
 	SND_PCI_QUIRK(0x1043, 0x1caf, "ASUS G634JY/JZ/JI/JG", ALC285_FIXUP_ASUS_SPI_REAR_SPEAKERS),
-	SND_PCI_QUIRK(0x1043, 0x1ccd, "ASUS X555UB", ALC256_FIXUP_ASUS_MIC),
+	SND_PCI_QUIRK(0x1043, 0x1ccd, "ASUS X555UB", ALC256_FIXUP_ASUS_MIC_NO_PRESENCE),
 	SND_PCI_QUIRK(0x1043, 0x1ccf, "ASUS G814JU/JV/JI", ALC245_FIXUP_CS35L41_SPI_2),
 	SND_PCI_QUIRK(0x1043, 0x1cdf, "ASUS G814JY/JZ/JG", ALC245_FIXUP_CS35L41_SPI_2),
 	SND_PCI_QUIRK(0x1043, 0x1cef, "ASUS G834JY/JZ/JI/JG", ALC285_FIXUP_ASUS_HEADSET_MIC),
-- 
2.39.5

[PATCH 6.14 121/183] bnxt_en: Fix error handling path in bnxt_init_chip()

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Shravya KN <shravya.k-n@broadcom.com>

[ Upstream commit 9ab7a709c926c16b4433cf02d04fcbcf35aaab2b ]

WARN_ON() is triggered in __flush_work() if bnxt_init_chip() fails
because we call cancel_work_sync() on dim work that has not been
initialized.

WARNING: CPU: 37 PID: 5223 at kernel/workqueue.c:4201 __flush_work.isra.0+0x212/0x230

The driver relies on the BNXT_STATE_NAPI_DISABLED bit to check if dim
work has already been cancelled.  But in the bnxt_open() path,
BNXT_STATE_NAPI_DISABLED is not set and this causes the error
path to think that it needs to cancel the uninitalized dim work.
Fix it by setting BNXT_STATE_NAPI_DISABLED during initialization.
The bit will be cleared when we enable NAPI and initialize dim work.

Fixes: 40452969a506 ("bnxt_en: Fix DIM shutdown")
Suggested-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Shravya KN <shravya.k-n@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/broadcom/bnxt/bnxt.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
index e44f9692dc2ee..da837866c02f8 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
@@ -11379,6 +11379,9 @@ static void bnxt_init_napi(struct bnxt *bp)
 		poll_fn = bnxt_poll_p5;
 	else if (BNXT_CHIP_TYPE_NITRO_A0(bp))
 		cp_nr_rings--;
+
+	set_bit(BNXT_STATE_NAPI_DISABLED, &bp->state);
+
 	for (i = 0; i < cp_nr_rings; i++) {
 		bnapi = bp->bnapi[i];
 		netif_napi_add_config(bp->dev, &bnapi->napi, poll_fn,
-- 
2.39.5

[PATCH 6.14 122/183] bnxt_en: Fix ethtool selftest output in one of the failure cases

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>

[ Upstream commit 8e6cc9045380f3f0c48ebda2bda5e1abe263388d ]

When RDMA driver is loaded, running offline self test is not
supported and driver returns failure early. But it is not clearing
the input buffer and hence the application prints some junk
characters for individual test results.

Fix it by clearing the buffer before returning.

Fixes: 895621f1c816 ("bnxt_en: Don't support offline self test when RoCE driver is loaded")
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c
index 9c58208395144..d974f71074a76 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c
@@ -4922,6 +4922,7 @@ static void bnxt_self_test(struct net_device *dev, struct ethtool_test *etest,
 	if (!bp->num_tests || !BNXT_PF(bp))
 		return;
 
+	memset(buf, 0, sizeof(u64) * bp->num_tests);
 	if (etest->flags & ETH_TEST_FL_OFFLINE &&
 	    bnxt_ulp_registered(bp->edev)) {
 		etest->flags |= ETH_TEST_FL_FAILED;
@@ -4929,7 +4930,6 @@ static void bnxt_self_test(struct net_device *dev, struct ethtool_test *etest,
 		return;
 	}
 
-	memset(buf, 0, sizeof(u64) * bp->num_tests);
 	if (!netif_running(dev)) {
 		etest->flags |= ETH_TEST_FL_FAILED;
 		return;
-- 
2.39.5

[PATCH 6.14 123/183] bnxt_en: Add missing skb_mark_for_recycle() in bnxt_rx_vlan()

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Somnath Kotur <somnath.kotur@broadcom.com>

[ Upstream commit a63db07e4ecd45b027718168faf7d798bb47bf58 ]

If bnxt_rx_vlan() fails because the VLAN protocol ID is invalid,
the SKB is freed but we're missing the call to recycle it.  This
may cause the warning:

"page_pool_release_retry() stalled pool shutdown"

Add the missing skb_mark_for_recycle() in bnxt_rx_vlan().

Fixes: 86b05508f775 ("bnxt_en: Use the unified RX page pool buffers for XDP and non-XDP")
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/broadcom/bnxt/bnxt.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
index da837866c02f8..174bb33432d13 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
@@ -2011,6 +2011,7 @@ static struct sk_buff *bnxt_rx_vlan(struct sk_buff *skb, u8 cmp_type,
 	}
 	return skb;
 vlan_err:
+	skb_mark_for_recycle(skb);
 	dev_kfree_skb(skb);
 	return NULL;
 }
-- 
2.39.5

[PATCH 6.14 124/183] bnxt_en: call pci_alloc_irq_vectors() after bnxt_reserve_rings()

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Kashyap Desai <kashyap.desai@broadcom.com>

[ Upstream commit 1ae04e489dd757e1e61999362f33e7c554c3b9e3 ]

On some architectures (e.g. ARM), calling pci_alloc_irq_vectors()
will immediately cause the MSIX table to be written.  This will not
work if we haven't called bnxt_reserve_rings() to properly map
the MSIX table to the MSIX vectors reserved by FW.

Fix the FW error recovery path to delay the bnxt_init_int_mode() ->
pci_alloc_irq_vectors() call by removing it from bnxt_hwrm_if_change().
bnxt_request_irq() later in the code path will call it and by then the
MSIX table is properly mapped.

Fixes: 4343838ca5eb ("bnxt_en: Replace deprecated PCI MSIX APIs")
Suggested-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/broadcom/bnxt/bnxt.c | 7 +------
 1 file changed, 1 insertion(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
index 174bb33432d13..a414d7d721b20 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
@@ -12172,13 +12172,8 @@ static int bnxt_hwrm_if_change(struct bnxt *bp, bool up)
 				set_bit(BNXT_STATE_ABORT_ERR, &bp->state);
 				return rc;
 			}
+			/* IRQ will be initialized later in bnxt_request_irq()*/
 			bnxt_clear_int_mode(bp);
-			rc = bnxt_init_int_mode(bp);
-			if (rc) {
-				clear_bit(BNXT_STATE_FW_RESET_DET, &bp->state);
-				netdev_err(bp->dev, "init int mode failed\n");
-				return rc;
-			}
 		}
 		rc = bnxt_cancel_reservations(bp, fw_reset);
 	}
-- 
2.39.5

[PATCH 6.14 125/183] bnxt_en: Fix coredump logic to free allocated buffer

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Shruti Parab <shruti.parab@broadcom.com>

[ Upstream commit ea9376cf68230e05492f22ca45d329f16e262c7b ]

When handling HWRM_DBG_COREDUMP_LIST FW command in
bnxt_hwrm_dbg_dma_data(), the allocated buffer info->dest_buf is
not freed in the error path.  In the normal path, info->dest_buf
is assigned to coredump->data and it will eventually be freed after
the coredump is collected.

Free info->dest_buf immediately inside bnxt_hwrm_dbg_dma_data() in
the error path.

Fixes: c74751f4c392 ("bnxt_en: Return error if FW returns more data than dump length")
Reported-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Shruti Parab <shruti.parab@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/broadcom/bnxt/bnxt_coredump.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_coredump.c b/drivers/net/ethernet/broadcom/bnxt/bnxt_coredump.c
index 7236d8e548ab5..0c0d833d19342 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt_coredump.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_coredump.c
@@ -116,6 +116,11 @@ static int bnxt_hwrm_dbg_dma_data(struct bnxt *bp, void *msg,
 				memcpy(info->dest_buf + off, dma_buf, len);
 			} else {
 				rc = -ENOBUFS;
+				if (cmn_req->req_type ==
+				    cpu_to_le16(HWRM_DBG_COREDUMP_LIST)) {
+					kfree(info->dest_buf);
+					info->dest_buf = NULL;
+				}
 				break;
 			}
 		}
-- 
2.39.5

[PATCH 6.14 126/183] bnxt_en: Fix out-of-bound memcpy() during ethtool -w

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Shruti Parab <shruti.parab@broadcom.com>

[ Upstream commit 6b87bd94f34370bbf1dfa59352bed8efab5bf419 ]

When retrieving the FW coredump using ethtool, it can sometimes cause
memory corruption:

BUG: KFENCE: memory corruption in __bnxt_get_coredump+0x3ef/0x670 [bnxt_en]
Corrupted memory at 0x000000008f0f30e8 [ ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ] (in kfence-#45):
__bnxt_get_coredump+0x3ef/0x670 [bnxt_en]
ethtool_get_dump_data+0xdc/0x1a0
__dev_ethtool+0xa1e/0x1af0
dev_ethtool+0xa8/0x170
dev_ioctl+0x1b5/0x580
sock_do_ioctl+0xab/0xf0
sock_ioctl+0x1ce/0x2e0
__x64_sys_ioctl+0x87/0xc0
do_syscall_64+0x5c/0xf0
entry_SYSCALL_64_after_hwframe+0x78/0x80

...

This happens when copying the coredump segment list in
bnxt_hwrm_dbg_dma_data() with the HWRM_DBG_COREDUMP_LIST FW command.
The info->dest_buf buffer is allocated based on the number of coredump
segments returned by the FW.  The segment list is then DMA'ed by
the FW and the length of the DMA is returned by FW.  The driver then
copies this DMA'ed segment list to info->dest_buf.

In some cases, this DMA length may exceed the info->dest_buf length
and cause the above BUG condition.  Fix it by capping the copy
length to not exceed the length of info->dest_buf.  The extra
DMA data contains no useful information.

This code path is shared for the HWRM_DBG_COREDUMP_LIST and the
HWRM_DBG_COREDUMP_RETRIEVE FW commands.  The buffering is different
for these 2 FW commands.  To simplify the logic, we need to move
the line to adjust the buffer length for HWRM_DBG_COREDUMP_RETRIEVE
up, so that the new check to cap the copy length will work for both
commands.

Fixes: c74751f4c392 ("bnxt_en: Return error if FW returns more data than dump length")
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Shruti Parab <shruti.parab@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/ethernet/broadcom/bnxt/bnxt_coredump.c    | 15 ++++++++++-----
 1 file changed, 10 insertions(+), 5 deletions(-)

diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_coredump.c b/drivers/net/ethernet/broadcom/bnxt/bnxt_coredump.c
index 0c0d833d19342..a73398c4a3e98 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt_coredump.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_coredump.c
@@ -110,10 +110,19 @@ static int bnxt_hwrm_dbg_dma_data(struct bnxt *bp, void *msg,
 			}
 		}
 
+		if (cmn_req->req_type ==
+				cpu_to_le16(HWRM_DBG_COREDUMP_RETRIEVE))
+			info->dest_buf_size += len;
+
 		if (info->dest_buf) {
 			if ((info->seg_start + off + len) <=
 			    BNXT_COREDUMP_BUF_LEN(info->buf_len)) {
-				memcpy(info->dest_buf + off, dma_buf, len);
+				u16 copylen = min_t(u16, len,
+						    info->dest_buf_size - off);
+
+				memcpy(info->dest_buf + off, dma_buf, copylen);
+				if (copylen < len)
+					break;
 			} else {
 				rc = -ENOBUFS;
 				if (cmn_req->req_type ==
@@ -125,10 +134,6 @@ static int bnxt_hwrm_dbg_dma_data(struct bnxt *bp, void *msg,
 			}
 		}
 
-		if (cmn_req->req_type ==
-				cpu_to_le16(HWRM_DBG_COREDUMP_RETRIEVE))
-			info->dest_buf_size += len;
-
 		if (!(cmn_resp->flags & HWRM_DBG_CMN_FLAGS_MORE))
 			break;
 
-- 
2.39.5

[PATCH 6.14 127/183] bnxt_en: Fix ethtool -d byte order for 32-bit values

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Michael Chan <michael.chan@broadcom.com>

[ Upstream commit 02e8be5a032cae0f4ca33c6053c44d83cf4acc93 ]

For version 1 register dump that includes the PCIe stats, the existing
code incorrectly assumes that all PCIe stats are 64-bit values.  Fix it
by using an array containing the starting and ending index of the 32-bit
values.  The loop in bnxt_get_regs() will use the array to do proper
endian swap for the 32-bit values.

Fixes: b5d600b027eb ("bnxt_en: Add support for 'ethtool -d'")
Reviewed-by: Shruti Parab <shruti.parab@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/ethernet/broadcom/bnxt/bnxt_ethtool.c | 38 ++++++++++++++++---
 1 file changed, 32 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c
index d974f71074a76..54208e0495983 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c
@@ -2062,6 +2062,17 @@ static int bnxt_get_regs_len(struct net_device *dev)
 	return reg_len;
 }
 
+#define BNXT_PCIE_32B_ENTRY(start, end)			\
+	 { offsetof(struct pcie_ctx_hw_stats, start),	\
+	   offsetof(struct pcie_ctx_hw_stats, end) }
+
+static const struct {
+	u16 start;
+	u16 end;
+} bnxt_pcie_32b_entries[] = {
+	BNXT_PCIE_32B_ENTRY(pcie_ltssm_histogram[0], pcie_ltssm_histogram[3]),
+};
+
 static void bnxt_get_regs(struct net_device *dev, struct ethtool_regs *regs,
 			  void *_p)
 {
@@ -2094,12 +2105,27 @@ static void bnxt_get_regs(struct net_device *dev, struct ethtool_regs *regs,
 	req->pcie_stat_host_addr = cpu_to_le64(hw_pcie_stats_addr);
 	rc = hwrm_req_send(bp, req);
 	if (!rc) {
-		__le64 *src = (__le64 *)hw_pcie_stats;
-		u64 *dst = (u64 *)(_p + BNXT_PXP_REG_LEN);
-		int i;
-
-		for (i = 0; i < sizeof(*hw_pcie_stats) / sizeof(__le64); i++)
-			dst[i] = le64_to_cpu(src[i]);
+		u8 *dst = (u8 *)(_p + BNXT_PXP_REG_LEN);
+		u8 *src = (u8 *)hw_pcie_stats;
+		int i, j;
+
+		for (i = 0, j = 0; i < sizeof(*hw_pcie_stats); ) {
+			if (i >= bnxt_pcie_32b_entries[j].start &&
+			    i <= bnxt_pcie_32b_entries[j].end) {
+				u32 *dst32 = (u32 *)(dst + i);
+
+				*dst32 = le32_to_cpu(*(__le32 *)(src + i));
+				i += 4;
+				if (i > bnxt_pcie_32b_entries[j].end &&
+				    j < ARRAY_SIZE(bnxt_pcie_32b_entries) - 1)
+					j++;
+			} else {
+				u64 *dst64 = (u64 *)(dst + i);
+
+				*dst64 = le64_to_cpu(*(__le64 *)(src + i));
+				i += 8;
+			}
+		}
 	}
 	hwrm_req_drop(bp, req);
 }
-- 
2.39.5

[PATCH 6.14 128/183] nvme-tcp: fix premature queue removal and I/O failover

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Michael Liang <mliang@purestorage.com>

[ Upstream commit 77e40bbce93059658aee02786a32c5c98a240a8a ]

This patch addresses a data corruption issue observed in nvme-tcp during
testing.

In an NVMe native multipath setup, when an I/O timeout occurs, all
inflight I/Os are canceled almost immediately after the kernel socket is
shut down. These canceled I/Os are reported as host path errors,
triggering a failover that succeeds on a different path.

However, at this point, the original I/O may still be outstanding in the
host's network transmission path (e.g., the NIC’s TX queue). From the
user-space app's perspective, the buffer associated with the I/O is
considered completed since they're acked on the different path and may
be reused for new I/O requests.

Because nvme-tcp enables zero-copy by default in the transmission path,
this can lead to corrupted data being sent to the original target,
ultimately causing data corruption.

We can reproduce this data corruption by injecting delay on one path and
triggering i/o timeout.

To prevent this issue, this change ensures that all inflight
transmissions are fully completed from host's perspective before
returning from queue stop. To handle concurrent I/O timeout from multiple
namespaces under the same controller, always wait in queue stop
regardless of queue's state.

This aligns with the behavior of queue stopping in other NVMe fabric
transports.

Fixes: 3f2304f8c6d6 ("nvme-tcp: add NVMe over TCP host driver")
Signed-off-by: Michael Liang <mliang@purestorage.com>
Reviewed-by: Mohamed Khalfella <mkhalfella@purestorage.com>
Reviewed-by: Randy Jennings <randyj@purestorage.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvme/host/tcp.c | 31 +++++++++++++++++++++++++++++--
 1 file changed, 29 insertions(+), 2 deletions(-)

diff --git a/drivers/nvme/host/tcp.c b/drivers/nvme/host/tcp.c
index 327f3f2f5399c..d991baa82a1c2 100644
--- a/drivers/nvme/host/tcp.c
+++ b/drivers/nvme/host/tcp.c
@@ -1944,7 +1944,7 @@ static void __nvme_tcp_stop_queue(struct nvme_tcp_queue *queue)
 	cancel_work_sync(&queue->io_work);
 }
 
-static void nvme_tcp_stop_queue(struct nvme_ctrl *nctrl, int qid)
+static void nvme_tcp_stop_queue_nowait(struct nvme_ctrl *nctrl, int qid)
 {
 	struct nvme_tcp_ctrl *ctrl = to_tcp_ctrl(nctrl);
 	struct nvme_tcp_queue *queue = &ctrl->queues[qid];
@@ -1963,6 +1963,31 @@ static void nvme_tcp_stop_queue(struct nvme_ctrl *nctrl, int qid)
 	mutex_unlock(&queue->queue_lock);
 }
 
+static void nvme_tcp_wait_queue(struct nvme_ctrl *nctrl, int qid)
+{
+	struct nvme_tcp_ctrl *ctrl = to_tcp_ctrl(nctrl);
+	struct nvme_tcp_queue *queue = &ctrl->queues[qid];
+	int timeout = 100;
+
+	while (timeout > 0) {
+		if (!test_bit(NVME_TCP_Q_ALLOCATED, &queue->flags) ||
+		    !sk_wmem_alloc_get(queue->sock->sk))
+			return;
+		msleep(2);
+		timeout -= 2;
+	}
+	dev_warn(nctrl->device,
+		 "qid %d: timeout draining sock wmem allocation expired\n",
+		 qid);
+}
+
+static void nvme_tcp_stop_queue(struct nvme_ctrl *nctrl, int qid)
+{
+	nvme_tcp_stop_queue_nowait(nctrl, qid);
+	nvme_tcp_wait_queue(nctrl, qid);
+}
+
+
 static void nvme_tcp_setup_sock_ops(struct nvme_tcp_queue *queue)
 {
 	write_lock_bh(&queue->sock->sk->sk_callback_lock);
@@ -2030,7 +2055,9 @@ static void nvme_tcp_stop_io_queues(struct nvme_ctrl *ctrl)
 	int i;
 
 	for (i = 1; i < ctrl->queue_count; i++)
-		nvme_tcp_stop_queue(ctrl, i);
+		nvme_tcp_stop_queue_nowait(ctrl, i);
+	for (i = 1; i < ctrl->queue_count; i++)
+		nvme_tcp_wait_queue(ctrl, i);
 }
 
 static int nvme_tcp_start_io_queues(struct nvme_ctrl *ctrl,
-- 
2.39.5

[PATCH 6.14 129/183] nvme-tcp: select CONFIG_TLS from CONFIG_NVME_TCP_TLS

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alistair Francis <alistair23@gmail.com>

[ Upstream commit 521987940ad4fd37fe3d0340ec6f39c4e8e91e36 ]

Ensure that TLS support is enabled in the kernel when
CONFIG_NVME_TCP_TLS is enabled. Without this the code compiles, but does
not actually work unless something else enables CONFIG_TLS.

Fixes: be8e82caa68 ("nvme-tcp: enable TLS handshake upcall")
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvme/host/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/nvme/host/Kconfig b/drivers/nvme/host/Kconfig
index 486afe5981845..09ed1f61c9a85 100644
--- a/drivers/nvme/host/Kconfig
+++ b/drivers/nvme/host/Kconfig
@@ -97,6 +97,7 @@ config NVME_TCP_TLS
 	depends on NVME_TCP
 	select NET_HANDSHAKE
 	select KEYS
+	select TLS
 	help
 	  Enables TLS encryption for NVMe TCP using the netlink handshake API.
 
-- 
2.39.5

[PATCH 6.14 130/183] nvmet-tcp: select CONFIG_TLS from CONFIG_NVME_TARGET_TCP_TLS

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alistair Francis <alistair.francis@wdc.com>

[ Upstream commit ac38b7ef704c0659568fd4b2c7e6c1255fc51798 ]

Ensure that TLS support is enabled in the kernel when
CONFIG_NVME_TARGET_TCP_TLS is enabled. Without this the code compiles,
but does not actually work unless something else enables CONFIG_TLS.

Fixes: 675b453e0241 ("nvmet-tcp: enable TLS handshake upcall")
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvme/target/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/nvme/target/Kconfig b/drivers/nvme/target/Kconfig
index fb7446d6d6829..4c253b433bf78 100644
--- a/drivers/nvme/target/Kconfig
+++ b/drivers/nvme/target/Kconfig
@@ -98,6 +98,7 @@ config NVME_TARGET_TCP_TLS
 	bool "NVMe over Fabrics TCP target TLS encryption support"
 	depends on NVME_TARGET_TCP
 	select NET_HANDSHAKE
+	select TLS
 	help
 	  Enables TLS encryption for the NVMe TCP target using the netlink handshake API.
 
-- 
2.39.5

[PATCH 6.14 131/183] ASoC: stm32: sai: skip useless iterations on kernel rate loop

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Olivier Moysan <olivier.moysan@foss.st.com>

[ Upstream commit edea92770a3b6454dc796fc5436a3315bb402181 ]

the frequency of the kernel clock must be greater than or equal to the
bitclock rate. When searching for a convenient kernel clock rate in
stm32_sai_set_parent_rate() function, it is useless to continue the loop
below bitclock rate, as it will result in a invalid kernel clock rate.
Change the loop output condition.

Fixes: 2cfe1ff22555 ("ASoC: stm32: sai: add stm32mp25 support")
Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com>
Link: https://patch.msgid.link/20250430165210.321273-2-olivier.moysan@foss.st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/stm/stm32_sai_sub.c | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

diff --git a/sound/soc/stm/stm32_sai_sub.c b/sound/soc/stm/stm32_sai_sub.c
index 3efbf4aaf9654..5a5acc67569fe 100644
--- a/sound/soc/stm/stm32_sai_sub.c
+++ b/sound/soc/stm/stm32_sai_sub.c
@@ -409,11 +409,11 @@ static int stm32_sai_set_parent_rate(struct stm32_sai_sub_data *sai,
 				     unsigned int rate)
 {
 	struct platform_device *pdev = sai->pdev;
-	unsigned int sai_ck_rate, sai_ck_max_rate, sai_curr_rate, sai_new_rate;
+	unsigned int sai_ck_rate, sai_ck_max_rate, sai_ck_min_rate, sai_curr_rate, sai_new_rate;
 	int div, ret;
 
 	/*
-	 * Set maximum expected kernel clock frequency
+	 * Set minimum and maximum expected kernel clock frequency
 	 * - mclk on or spdif:
 	 *   f_sai_ck = MCKDIV * mclk-fs * fs
 	 *   Here typical 256 ratio is assumed for mclk-fs
@@ -423,13 +423,16 @@ static int stm32_sai_set_parent_rate(struct stm32_sai_sub_data *sai,
 	 *   Set constraint MCKDIV * FRL <= 256, to ensure MCKDIV is in available range
 	 *   f_sai_ck = sai_ck_max_rate * pow_of_two(FRL) / 256
 	 */
+	sai_ck_min_rate = rate * 256;
 	if (!(rate % SAI_RATE_11K))
 		sai_ck_max_rate = SAI_MAX_SAMPLE_RATE_11K * 256;
 	else
 		sai_ck_max_rate = SAI_MAX_SAMPLE_RATE_8K * 256;
 
-	if (!sai->sai_mclk && !STM_SAI_PROTOCOL_IS_SPDIF(sai))
+	if (!sai->sai_mclk && !STM_SAI_PROTOCOL_IS_SPDIF(sai)) {
+		sai_ck_min_rate = rate * sai->fs_length;
 		sai_ck_max_rate /= DIV_ROUND_CLOSEST(256, roundup_pow_of_two(sai->fs_length));
+	}
 
 	/*
 	 * Request exclusivity, as the clock is shared by SAI sub-blocks and by
@@ -472,7 +475,7 @@ static int stm32_sai_set_parent_rate(struct stm32_sai_sub_data *sai,
 		/* Try a lower frequency */
 		div++;
 		sai_ck_rate = sai_ck_max_rate / div;
-	} while (sai_ck_rate > rate);
+	} while (sai_ck_rate >= sai_ck_min_rate);
 
 	/* No accurate rate found */
 	dev_err(&pdev->dev, "Failed to find an accurate rate");
-- 
2.39.5

[PATCH 6.14 132/183] ASoC: stm32: sai: add a check on minimal kernel frequency

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Olivier Moysan <olivier.moysan@foss.st.com>

[ Upstream commit cce34d113e2a592806abcdc02c7f8513775d8b20 ]

On MP2 SoCs SAI kernel clock rate is managed through
stm32_sai_set_parent_rate() function.
If the kernel clock rate was set previously to a low frequency, this
frequency may be too low to support the newly requested audio stream rate.
However the stm32_sai_rate_accurate() will only check accuracy against
the maximum kernel clock rate. The function will return leaving the kernel
clock rate unchanged.
Add a check on minimal frequency requirement, to avoid this.

Fixes: 2cfe1ff22555 ("ASoC: stm32: sai: add stm32mp25 support")
Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com>
Link: https://patch.msgid.link/20250430165210.321273-3-olivier.moysan@foss.st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/stm/stm32_sai_sub.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/sound/soc/stm/stm32_sai_sub.c b/sound/soc/stm/stm32_sai_sub.c
index 5a5acc67569fe..d9c4266c8150d 100644
--- a/sound/soc/stm/stm32_sai_sub.c
+++ b/sound/soc/stm/stm32_sai_sub.c
@@ -447,7 +447,10 @@ static int stm32_sai_set_parent_rate(struct stm32_sai_sub_data *sai,
 	 * return immediately.
 	 */
 	sai_curr_rate = clk_get_rate(sai->sai_ck);
-	if (stm32_sai_rate_accurate(sai_ck_max_rate, sai_curr_rate))
+	dev_dbg(&pdev->dev, "kernel clock rate: min [%u], max [%u], current [%u]",
+		sai_ck_min_rate, sai_ck_max_rate, sai_curr_rate);
+	if (stm32_sai_rate_accurate(sai_ck_max_rate, sai_curr_rate) &&
+	    sai_curr_rate >= sai_ck_min_rate)
 		return 0;
 
 	/*
-- 
2.39.5

[PATCH 6.14 133/183] ASoC: simple-card-utils: Fix pointer check in graph_util_parse_link_direction

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alexander Stein <alexander.stein@ew.tq-group.com>

[ Upstream commit 3cc393d2232ec770b5f79bf0673d67702a3536c3 ]

Actually check if the passed pointers are valid, before writing to them.
This also fixes a USBAN warning:
UBSAN: invalid-load in ../sound/soc/fsl/imx-card.c:687:25
load of value 255 is not a valid value for type '_Bool'

This is because playback_only is uninitialized and is not written to, as
the playback-only property is absent.

Fixes: 844de7eebe97 ("ASoC: audio-graph-card2: expand dai_link property part")
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Link: https://patch.msgid.link/20250429094910.1150970-1-alexander.stein@ew.tq-group.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/generic/simple-card-utils.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/sound/soc/generic/simple-card-utils.c b/sound/soc/generic/simple-card-utils.c
index 32efb30c55d69..8bd5b93f34576 100644
--- a/sound/soc/generic/simple-card-utils.c
+++ b/sound/soc/generic/simple-card-utils.c
@@ -1146,9 +1146,9 @@ void graph_util_parse_link_direction(struct device_node *np,
 	bool is_playback_only = of_property_read_bool(np, "playback-only");
 	bool is_capture_only  = of_property_read_bool(np, "capture-only");
 
-	if (is_playback_only)
+	if (playback_only)
 		*playback_only = is_playback_only;
-	if (is_capture_only)
+	if (capture_only)
 		*capture_only = is_capture_only;
 }
 EXPORT_SYMBOL_GPL(graph_util_parse_link_direction);
-- 
2.39.5

[PATCH 6.14 134/183] bnxt_en: fix module unload sequence

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Vadim Fedorenko <vadfed@meta.com>

[ Upstream commit 927069d5c40c1cfa7b2d13cfc6d7d58bc6f85c50 ]

Recent updates to the PTP part of bnxt changed the way PTP FIFO is
cleared, skbs waiting for TX timestamps are now cleared during
ndo_close() call. To do clearing procedure, the ptp structure must
exist and point to a valid address. Module destroy sequence had ptp
clear code running before netdev close causing invalid memory access and
kernel crash. Change the sequence to destroy ptp structure after device
close.

Fixes: 8f7ae5a85137 ("bnxt_en: improve TX timestamping FIFO configuration")
Reported-by: Taehee Yoo <ap420073@gmail.com>
Closes: https://lore.kernel.org/netdev/CAMArcTWDe2cd41=ub=zzvYifaYcYv-N-csxfqxUvejy_L0D6UQ@mail.gmail.com/
Signed-off-by: Vadim Fedorenko <vadfed@meta.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Tested-by: Taehee Yoo <ap420073@gmail.com>
Link: https://patch.msgid.link/20250430170343.759126-1-vadfed@meta.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/broadcom/bnxt/bnxt.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
index a414d7d721b20..bd8b9cb05ae98 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
@@ -15731,8 +15731,8 @@ static void bnxt_remove_one(struct pci_dev *pdev)
 
 	bnxt_rdma_aux_device_del(bp);
 
-	bnxt_ptp_clear(bp);
 	unregister_netdev(dev);
+	bnxt_ptp_clear(bp);
 
 	bnxt_rdma_aux_device_uninit(bp);
 
-- 
2.39.5

[PATCH 6.14 135/183] net: use sock_gen_put() when sk_state is TCP_TIME_WAIT

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jibin Zhang <jibin.zhang@mediatek.com>

[ Upstream commit f920436a44295ca791ebb6dae3f4190142eec703 ]

It is possible for a pointer of type struct inet_timewait_sock to be
returned from the functions __inet_lookup_established() and
__inet6_lookup_established(). This can cause a crash when the
returned pointer is of type struct inet_timewait_sock and
sock_put() is called on it. The following is a crash call stack that
shows sk->sk_wmem_alloc being accessed in sk_free() during the call to
sock_put() on a struct inet_timewait_sock pointer. To avoid this issue,
use sock_gen_put() instead of sock_put() when sk->sk_state
is TCP_TIME_WAIT.

mrdump.ko        ipanic() + 120
vmlinux          notifier_call_chain(nr_to_call=-1, nr_calls=0) + 132
vmlinux          atomic_notifier_call_chain(val=0) + 56
vmlinux          panic() + 344
vmlinux          add_taint() + 164
vmlinux          end_report() + 136
vmlinux          kasan_report(size=0) + 236
vmlinux          report_tag_fault() + 16
vmlinux          do_tag_recovery() + 16
vmlinux          __do_kernel_fault() + 88
vmlinux          do_bad_area() + 28
vmlinux          do_tag_check_fault() + 60
vmlinux          do_mem_abort() + 80
vmlinux          el1_abort() + 56
vmlinux          el1h_64_sync_handler() + 124
vmlinux        > 0xFFFFFFC080011294()
vmlinux          __lse_atomic_fetch_add_release(v=0xF2FFFF82A896087C)
vmlinux          __lse_atomic_fetch_sub_release(v=0xF2FFFF82A896087C)
vmlinux          arch_atomic_fetch_sub_release(i=1, v=0xF2FFFF82A896087C)
+ 8
vmlinux          raw_atomic_fetch_sub_release(i=1, v=0xF2FFFF82A896087C)
+ 8
vmlinux          atomic_fetch_sub_release(i=1, v=0xF2FFFF82A896087C) + 8
vmlinux          __refcount_sub_and_test(i=1, r=0xF2FFFF82A896087C,
oldp=0) + 8
vmlinux          __refcount_dec_and_test(r=0xF2FFFF82A896087C, oldp=0) + 8
vmlinux          refcount_dec_and_test(r=0xF2FFFF82A896087C) + 8
vmlinux          sk_free(sk=0xF2FFFF82A8960700) + 28
vmlinux          sock_put() + 48
vmlinux          tcp6_check_fraglist_gro() + 236
vmlinux          tcp6_gro_receive() + 624
vmlinux          ipv6_gro_receive() + 912
vmlinux          dev_gro_receive() + 1116
vmlinux          napi_gro_receive() + 196
ccmni.ko         ccmni_rx_callback() + 208
ccmni.ko         ccmni_queue_recv_skb() + 388
ccci_dpmaif.ko   dpmaif_rxq_push_thread() + 1088
vmlinux          kthread() + 268
vmlinux          0xFFFFFFC08001F30C()

Fixes: c9d1d23e5239 ("net: add heuristic for enabling TCP fraglist GRO")
Signed-off-by: Jibin Zhang <jibin.zhang@mediatek.com>
Signed-off-by: Shiming Cheng <shiming.cheng@mediatek.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250429020412.14163-1-shiming.cheng@mediatek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv4/tcp_offload.c   | 2 +-
 net/ipv6/tcpv6_offload.c | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/net/ipv4/tcp_offload.c b/net/ipv4/tcp_offload.c
index 2dfac79dc78b8..e04ebe651c334 100644
--- a/net/ipv4/tcp_offload.c
+++ b/net/ipv4/tcp_offload.c
@@ -435,7 +435,7 @@ static void tcp4_check_fraglist_gro(struct list_head *head, struct sk_buff *skb,
 				       iif, sdif);
 	NAPI_GRO_CB(skb)->is_flist = !sk;
 	if (sk)
-		sock_put(sk);
+		sock_gen_put(sk);
 }
 
 INDIRECT_CALLABLE_SCOPE
diff --git a/net/ipv6/tcpv6_offload.c b/net/ipv6/tcpv6_offload.c
index ae2da28f9dfb1..5ab509a5fbdfc 100644
--- a/net/ipv6/tcpv6_offload.c
+++ b/net/ipv6/tcpv6_offload.c
@@ -42,7 +42,7 @@ static void tcp6_check_fraglist_gro(struct list_head *head, struct sk_buff *skb,
 					iif, sdif);
 	NAPI_GRO_CB(skb)->is_flist = !sk;
 	if (sk)
-		sock_put(sk);
+		sock_gen_put(sk);
 #endif /* IS_ENABLED(CONFIG_IPV6) */
 }
 
-- 
2.39.5

[PATCH 6.14 136/183] ptp: ocp: Fix NULL dereference in Adva board SMA sysfs operations

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sagi Maimon <sagi.maimon@adtran.com>

[ Upstream commit e98386d79a23c57cf179fe4138322e277aa3aa74 ]

On Adva boards, SMA sysfs store/get operations can call
__handle_signal_outputs() or __handle_signal_inputs() while the `irig`
and `dcf` pointers are uninitialized, leading to a NULL pointer
dereference in __handle_signal() and causing a kernel crash. Adva boards
don't use `irig` or `dcf` functionality, so add Adva-specific callbacks
`ptp_ocp_sma_adva_set_outputs()` and `ptp_ocp_sma_adva_set_inputs()` that
avoid invoking `irig` or `dcf` input/output routines.

Fixes: ef61f5528fca ("ptp: ocp: add Adva timecard support")
Signed-off-by: Sagi Maimon <maimon.sagi@gmail.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20250429073320.33277-1-maimon.sagi@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/ptp/ptp_ocp.c | 52 +++++++++++++++++++++++++++++++++++++++++--
 1 file changed, 50 insertions(+), 2 deletions(-)

diff --git a/drivers/ptp/ptp_ocp.c b/drivers/ptp/ptp_ocp.c
index 4b7344e1816e4..605cce32a3d37 100644
--- a/drivers/ptp/ptp_ocp.c
+++ b/drivers/ptp/ptp_ocp.c
@@ -2578,12 +2578,60 @@ static const struct ocp_sma_op ocp_fb_sma_op = {
 	.set_output	= ptp_ocp_sma_fb_set_output,
 };
 
+static int
+ptp_ocp_sma_adva_set_output(struct ptp_ocp *bp, int sma_nr, u32 val)
+{
+	u32 reg, mask, shift;
+	unsigned long flags;
+	u32 __iomem *gpio;
+
+	gpio = sma_nr > 2 ? &bp->sma_map1->gpio2 : &bp->sma_map2->gpio2;
+	shift = sma_nr & 1 ? 0 : 16;
+
+	mask = 0xffff << (16 - shift);
+
+	spin_lock_irqsave(&bp->lock, flags);
+
+	reg = ioread32(gpio);
+	reg = (reg & mask) | (val << shift);
+
+	iowrite32(reg, gpio);
+
+	spin_unlock_irqrestore(&bp->lock, flags);
+
+	return 0;
+}
+
+static int
+ptp_ocp_sma_adva_set_inputs(struct ptp_ocp *bp, int sma_nr, u32 val)
+{
+	u32 reg, mask, shift;
+	unsigned long flags;
+	u32 __iomem *gpio;
+
+	gpio = sma_nr > 2 ? &bp->sma_map2->gpio1 : &bp->sma_map1->gpio1;
+	shift = sma_nr & 1 ? 0 : 16;
+
+	mask = 0xffff << (16 - shift);
+
+	spin_lock_irqsave(&bp->lock, flags);
+
+	reg = ioread32(gpio);
+	reg = (reg & mask) | (val << shift);
+
+	iowrite32(reg, gpio);
+
+	spin_unlock_irqrestore(&bp->lock, flags);
+
+	return 0;
+}
+
 static const struct ocp_sma_op ocp_adva_sma_op = {
 	.tbl		= { ptp_ocp_adva_sma_in, ptp_ocp_adva_sma_out },
 	.init		= ptp_ocp_sma_fb_init,
 	.get		= ptp_ocp_sma_fb_get,
-	.set_inputs	= ptp_ocp_sma_fb_set_inputs,
-	.set_output	= ptp_ocp_sma_fb_set_output,
+	.set_inputs	= ptp_ocp_sma_adva_set_inputs,
+	.set_output	= ptp_ocp_sma_adva_set_output,
 };
 
 static int
-- 
2.39.5

[PATCH 6.14 137/183] net: lan743x: Fix memleak issue when GSO enabled

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Thangaraj Samynathan <thangaraj.s@microchip.com>

[ Upstream commit 2d52e2e38b85c8b7bc00dca55c2499f46f8c8198 ]

Always map the `skb` to the LS descriptor. Previously skb was
mapped to EXT descriptor when the number of fragments is zero with
GSO enabled. Mapping the skb to EXT descriptor prevents it from
being freed, leading to a memory leak

Fixes: 23f0703c125b ("lan743x: Add main source files for new lan743x driver")
Signed-off-by: Thangaraj Samynathan <thangaraj.s@microchip.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250429052527.10031-1-thangaraj.s@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/microchip/lan743x_main.c | 8 ++++++--
 drivers/net/ethernet/microchip/lan743x_main.h | 1 +
 2 files changed, 7 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/microchip/lan743x_main.c b/drivers/net/ethernet/microchip/lan743x_main.c
index 23760b613d3ec..e2d6bfb5d6933 100644
--- a/drivers/net/ethernet/microchip/lan743x_main.c
+++ b/drivers/net/ethernet/microchip/lan743x_main.c
@@ -1815,6 +1815,7 @@ static void lan743x_tx_frame_add_lso(struct lan743x_tx *tx,
 	if (nr_frags <= 0) {
 		tx->frame_data0 |= TX_DESC_DATA0_LS_;
 		tx->frame_data0 |= TX_DESC_DATA0_IOC_;
+		tx->frame_last = tx->frame_first;
 	}
 	tx_descriptor = &tx->ring_cpu_ptr[tx->frame_tail];
 	tx_descriptor->data0 = cpu_to_le32(tx->frame_data0);
@@ -1884,6 +1885,7 @@ static int lan743x_tx_frame_add_fragment(struct lan743x_tx *tx,
 		tx->frame_first = 0;
 		tx->frame_data0 = 0;
 		tx->frame_tail = 0;
+		tx->frame_last = 0;
 		return -ENOMEM;
 	}
 
@@ -1924,16 +1926,18 @@ static void lan743x_tx_frame_end(struct lan743x_tx *tx,
 	    TX_DESC_DATA0_DTYPE_DATA_) {
 		tx->frame_data0 |= TX_DESC_DATA0_LS_;
 		tx->frame_data0 |= TX_DESC_DATA0_IOC_;
+		tx->frame_last = tx->frame_tail;
 	}
 
-	tx_descriptor = &tx->ring_cpu_ptr[tx->frame_tail];
-	buffer_info = &tx->buffer_info[tx->frame_tail];
+	tx_descriptor = &tx->ring_cpu_ptr[tx->frame_last];
+	buffer_info = &tx->buffer_info[tx->frame_last];
 	buffer_info->skb = skb;
 	if (time_stamp)
 		buffer_info->flags |= TX_BUFFER_INFO_FLAG_TIMESTAMP_REQUESTED;
 	if (ignore_sync)
 		buffer_info->flags |= TX_BUFFER_INFO_FLAG_IGNORE_SYNC;
 
+	tx_descriptor = &tx->ring_cpu_ptr[tx->frame_tail];
 	tx_descriptor->data0 = cpu_to_le32(tx->frame_data0);
 	tx->frame_tail = lan743x_tx_next_index(tx, tx->frame_tail);
 	tx->last_tail = tx->frame_tail;
diff --git a/drivers/net/ethernet/microchip/lan743x_main.h b/drivers/net/ethernet/microchip/lan743x_main.h
index 7f73d66854bee..db5fc73e41cca 100644
--- a/drivers/net/ethernet/microchip/lan743x_main.h
+++ b/drivers/net/ethernet/microchip/lan743x_main.h
@@ -980,6 +980,7 @@ struct lan743x_tx {
 	u32		frame_first;
 	u32		frame_data0;
 	u32		frame_tail;
+	u32		frame_last;
 
 	struct lan743x_tx_buffer_info *buffer_info;
 
-- 
2.39.5

[PATCH 6.14 138/183] net: fec: ERR007885 Workaround for conventional TX

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mattias Barthel <mattias.barthel@atlascopco.com>

[ Upstream commit a179aad12badc43201cbf45d1e8ed2c1383c76b9 ]

Activate TX hang workaround also in
fec_enet_txq_submit_skb() when TSO is not enabled.

Errata: ERR007885

Symptoms: NETDEV WATCHDOG: eth0 (fec): transmit queue 0 timed out

commit 37d6017b84f7 ("net: fec: Workaround for imx6sx enet tx hang when enable three queues")
There is a TDAR race condition for mutliQ when the software sets TDAR
and the UDMA clears TDAR simultaneously or in a small window (2-4 cycles).
This will cause the udma_tx and udma_tx_arbiter state machines to hang.

So, the Workaround is checking TDAR status four time, if TDAR cleared by
    hardware and then write TDAR, otherwise don't set TDAR.

Fixes: 53bb20d1faba ("net: fec: add variable reg_desc_active to speed things up")
Signed-off-by: Mattias Barthel <mattias.barthel@atlascopco.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250429090826.3101258-1-mattiasbarthel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/freescale/fec_main.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c
index f7c4ce8e9a265..c5d5fa8d7dfdd 100644
--- a/drivers/net/ethernet/freescale/fec_main.c
+++ b/drivers/net/ethernet/freescale/fec_main.c
@@ -714,7 +714,12 @@ static int fec_enet_txq_submit_skb(struct fec_enet_priv_tx_q *txq,
 	txq->bd.cur = bdp;
 
 	/* Trigger transmission start */
-	writel(0, txq->bd.reg_desc_active);
+	if (!(fep->quirks & FEC_QUIRK_ERR007885) ||
+	    !readl(txq->bd.reg_desc_active) ||
+	    !readl(txq->bd.reg_desc_active) ||
+	    !readl(txq->bd.reg_desc_active) ||
+	    !readl(txq->bd.reg_desc_active))
+		writel(0, txq->bd.reg_desc_active);
 
 	return 0;
 }
-- 
2.39.5

[PATCH 6.14 139/183] octeon_ep: Fix host hang issue during device reboot

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sathesh B Edara <sedara@marvell.com>

[ Upstream commit 34f42736b325287a7b2ce37e415838f539767bda ]

When the host loses heartbeat messages from the device,
the driver calls the device-specific ndo_stop function,
which frees the resources. If the driver is unloaded in
this scenario, it calls ndo_stop again, attempting to free
resources that have already been freed, leading to a host
hang issue. To resolve this, dev_close should be called
instead of the device-specific stop function.dev_close
internally calls ndo_stop to stop the network interface
and performs additional cleanup tasks. During the driver
unload process, if the device is already down, ndo_stop
is not called.

Fixes: 5cb96c29aa0e ("octeon_ep: add heartbeat monitor")
Signed-off-by: Sathesh B Edara <sedara@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250429114624.19104-1-sedara@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/marvell/octeon_ep/octep_main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/marvell/octeon_ep/octep_main.c b/drivers/net/ethernet/marvell/octeon_ep/octep_main.c
index 0a679e95196fe..24499bb36c005 100644
--- a/drivers/net/ethernet/marvell/octeon_ep/octep_main.c
+++ b/drivers/net/ethernet/marvell/octeon_ep/octep_main.c
@@ -1223,7 +1223,7 @@ static void octep_hb_timeout_task(struct work_struct *work)
 		miss_cnt);
 	rtnl_lock();
 	if (netif_running(oct->netdev))
-		octep_stop(oct->netdev);
+		dev_close(oct->netdev);
 	rtnl_unlock();
 }
 
-- 
2.39.5

[PATCH 6.14 140/183] net: hns3: store rx VLAN tag offload state for VF

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jian Shen <shenjian15@huawei.com>

[ Upstream commit ef2383d078edcbe3055032436b16cdf206f26de2 ]

The VF driver missed to store the rx VLAN tag strip state when
user change the rx VLAN tag offload state. And it will default
to enable the rx vlan tag strip when re-init VF device after
reset. So if user disable rx VLAN tag offload, and trig reset,
then the HW will still strip the VLAN tag from packet nad fill
into RX BD, but the VF driver will ignore it for rx VLAN tag
offload disabled. It may cause the rx VLAN tag dropped.

Fixes: b2641e2ad456 ("net: hns3: Add support of hardware rx-vlan-offload to HNS3 VF driver")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250430093052.2400464-2-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../hisilicon/hns3/hns3vf/hclgevf_main.c      | 25 ++++++++++++++-----
 .../hisilicon/hns3/hns3vf/hclgevf_main.h      |  1 +
 2 files changed, 20 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c
index 9ba767740a043..dada42e7e0ec9 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c
@@ -1292,9 +1292,8 @@ static void hclgevf_sync_vlan_filter(struct hclgevf_dev *hdev)
 	rtnl_unlock();
 }
 
-static int hclgevf_en_hw_strip_rxvtag(struct hnae3_handle *handle, bool enable)
+static int hclgevf_en_hw_strip_rxvtag_cmd(struct hclgevf_dev *hdev, bool enable)
 {
-	struct hclgevf_dev *hdev = hclgevf_ae_get_hdev(handle);
 	struct hclge_vf_to_pf_msg send_msg;
 
 	hclgevf_build_send_msg(&send_msg, HCLGE_MBX_SET_VLAN,
@@ -1303,6 +1302,19 @@ static int hclgevf_en_hw_strip_rxvtag(struct hnae3_handle *handle, bool enable)
 	return hclgevf_send_mbx_msg(hdev, &send_msg, false, NULL, 0);
 }
 
+static int hclgevf_en_hw_strip_rxvtag(struct hnae3_handle *handle, bool enable)
+{
+	struct hclgevf_dev *hdev = hclgevf_ae_get_hdev(handle);
+	int ret;
+
+	ret = hclgevf_en_hw_strip_rxvtag_cmd(hdev, enable);
+	if (ret)
+		return ret;
+
+	hdev->rxvtag_strip_en = enable;
+	return 0;
+}
+
 static int hclgevf_reset_tqp(struct hnae3_handle *handle)
 {
 #define HCLGEVF_RESET_ALL_QUEUE_DONE	1U
@@ -2204,12 +2216,13 @@ static int hclgevf_rss_init_hw(struct hclgevf_dev *hdev)
 					  tc_valid, tc_size);
 }
 
-static int hclgevf_init_vlan_config(struct hclgevf_dev *hdev)
+static int hclgevf_init_vlan_config(struct hclgevf_dev *hdev,
+				    bool rxvtag_strip_en)
 {
 	struct hnae3_handle *nic = &hdev->nic;
 	int ret;
 
-	ret = hclgevf_en_hw_strip_rxvtag(nic, true);
+	ret = hclgevf_en_hw_strip_rxvtag(nic, rxvtag_strip_en);
 	if (ret) {
 		dev_err(&hdev->pdev->dev,
 			"failed to enable rx vlan offload, ret = %d\n", ret);
@@ -2879,7 +2892,7 @@ static int hclgevf_reset_hdev(struct hclgevf_dev *hdev)
 	if (ret)
 		return ret;
 
-	ret = hclgevf_init_vlan_config(hdev);
+	ret = hclgevf_init_vlan_config(hdev, hdev->rxvtag_strip_en);
 	if (ret) {
 		dev_err(&hdev->pdev->dev,
 			"failed(%d) to initialize VLAN config\n", ret);
@@ -2994,7 +3007,7 @@ static int hclgevf_init_hdev(struct hclgevf_dev *hdev)
 		goto err_config;
 	}
 
-	ret = hclgevf_init_vlan_config(hdev);
+	ret = hclgevf_init_vlan_config(hdev, true);
 	if (ret) {
 		dev_err(&hdev->pdev->dev,
 			"failed(%d) to initialize VLAN config\n", ret);
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.h b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.h
index cccef32284616..0208425ab594f 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.h
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.h
@@ -253,6 +253,7 @@ struct hclgevf_dev {
 	int *vector_irq;
 
 	bool gro_en;
+	bool rxvtag_strip_en;
 
 	unsigned long vlan_del_fail_bmap[BITS_TO_LONGS(VLAN_N_VID)];
 
-- 
2.39.5

[PATCH 6.14 141/183] net: hns3: fix an interrupt residual problem

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Yonglong Liu <liuyonglong@huawei.com>

[ Upstream commit 8e6b9c6ea5a55045eed6526d8ee49e93192d1a58 ]

When a VF is passthrough to a VM, and the VM is killed, the reported
interrupt may not been handled, it will remain, and won't be clear by
the nic engine even with a flr or tqp reset. When the VM restart, the
interrupt of the first vector may be dropped by the second enable_irq
in vfio, see the issue below:
https://gitlab.com/qemu-project/qemu/-/issues/2884#note_2423361621

We notice that the vfio has always behaved this way, and the interrupt
is a residue of the nic engine, so we fix the problem by moving the
vector enable process out of the enable_irq loop.

Fixes: 08a100689d4b ("net: hns3: re-organize vector handle")
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Link: https://patch.msgid.link/20250430093052.2400464-3-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/ethernet/hisilicon/hns3/hns3_enet.c   | 82 +++++++++----------
 1 file changed, 39 insertions(+), 43 deletions(-)

diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
index 9ff797fb36c45..b03b8758c7774 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
@@ -473,20 +473,14 @@ static void hns3_mask_vector_irq(struct hns3_enet_tqp_vector *tqp_vector,
 	writel(mask_en, tqp_vector->mask_addr);
 }
 
-static void hns3_vector_enable(struct hns3_enet_tqp_vector *tqp_vector)
+static void hns3_irq_enable(struct hns3_enet_tqp_vector *tqp_vector)
 {
 	napi_enable(&tqp_vector->napi);
 	enable_irq(tqp_vector->vector_irq);
-
-	/* enable vector */
-	hns3_mask_vector_irq(tqp_vector, 1);
 }
 
-static void hns3_vector_disable(struct hns3_enet_tqp_vector *tqp_vector)
+static void hns3_irq_disable(struct hns3_enet_tqp_vector *tqp_vector)
 {
-	/* disable vector */
-	hns3_mask_vector_irq(tqp_vector, 0);
-
 	disable_irq(tqp_vector->vector_irq);
 	napi_disable(&tqp_vector->napi);
 	cancel_work_sync(&tqp_vector->rx_group.dim.work);
@@ -707,11 +701,42 @@ static int hns3_set_rx_cpu_rmap(struct net_device *netdev)
 	return 0;
 }
 
+static void hns3_enable_irqs_and_tqps(struct net_device *netdev)
+{
+	struct hns3_nic_priv *priv = netdev_priv(netdev);
+	struct hnae3_handle *h = priv->ae_handle;
+	u16 i;
+
+	for (i = 0; i < priv->vector_num; i++)
+		hns3_irq_enable(&priv->tqp_vector[i]);
+
+	for (i = 0; i < priv->vector_num; i++)
+		hns3_mask_vector_irq(&priv->tqp_vector[i], 1);
+
+	for (i = 0; i < h->kinfo.num_tqps; i++)
+		hns3_tqp_enable(h->kinfo.tqp[i]);
+}
+
+static void hns3_disable_irqs_and_tqps(struct net_device *netdev)
+{
+	struct hns3_nic_priv *priv = netdev_priv(netdev);
+	struct hnae3_handle *h = priv->ae_handle;
+	u16 i;
+
+	for (i = 0; i < h->kinfo.num_tqps; i++)
+		hns3_tqp_disable(h->kinfo.tqp[i]);
+
+	for (i = 0; i < priv->vector_num; i++)
+		hns3_mask_vector_irq(&priv->tqp_vector[i], 0);
+
+	for (i = 0; i < priv->vector_num; i++)
+		hns3_irq_disable(&priv->tqp_vector[i]);
+}
+
 static int hns3_nic_net_up(struct net_device *netdev)
 {
 	struct hns3_nic_priv *priv = netdev_priv(netdev);
 	struct hnae3_handle *h = priv->ae_handle;
-	int i, j;
 	int ret;
 
 	ret = hns3_nic_reset_all_ring(h);
@@ -720,23 +745,13 @@ static int hns3_nic_net_up(struct net_device *netdev)
 
 	clear_bit(HNS3_NIC_STATE_DOWN, &priv->state);
 
-	/* enable the vectors */
-	for (i = 0; i < priv->vector_num; i++)
-		hns3_vector_enable(&priv->tqp_vector[i]);
-
-	/* enable rcb */
-	for (j = 0; j < h->kinfo.num_tqps; j++)
-		hns3_tqp_enable(h->kinfo.tqp[j]);
+	hns3_enable_irqs_and_tqps(netdev);
 
 	/* start the ae_dev */
 	ret = h->ae_algo->ops->start ? h->ae_algo->ops->start(h) : 0;
 	if (ret) {
 		set_bit(HNS3_NIC_STATE_DOWN, &priv->state);
-		while (j--)
-			hns3_tqp_disable(h->kinfo.tqp[j]);
-
-		for (j = i - 1; j >= 0; j--)
-			hns3_vector_disable(&priv->tqp_vector[j]);
+		hns3_disable_irqs_and_tqps(netdev);
 	}
 
 	return ret;
@@ -823,17 +838,9 @@ static void hns3_reset_tx_queue(struct hnae3_handle *h)
 static void hns3_nic_net_down(struct net_device *netdev)
 {
 	struct hns3_nic_priv *priv = netdev_priv(netdev);
-	struct hnae3_handle *h = hns3_get_handle(netdev);
 	const struct hnae3_ae_ops *ops;
-	int i;
 
-	/* disable vectors */
-	for (i = 0; i < priv->vector_num; i++)
-		hns3_vector_disable(&priv->tqp_vector[i]);
-
-	/* disable rcb */
-	for (i = 0; i < h->kinfo.num_tqps; i++)
-		hns3_tqp_disable(h->kinfo.tqp[i]);
+	hns3_disable_irqs_and_tqps(netdev);
 
 	/* stop ae_dev */
 	ops = priv->ae_handle->ae_algo->ops;
@@ -5864,8 +5871,6 @@ int hns3_set_channels(struct net_device *netdev,
 void hns3_external_lb_prepare(struct net_device *ndev, bool if_running)
 {
 	struct hns3_nic_priv *priv = netdev_priv(ndev);
-	struct hnae3_handle *h = priv->ae_handle;
-	int i;
 
 	if (!if_running)
 		return;
@@ -5876,11 +5881,7 @@ void hns3_external_lb_prepare(struct net_device *ndev, bool if_running)
 	netif_carrier_off(ndev);
 	netif_tx_disable(ndev);
 
-	for (i = 0; i < priv->vector_num; i++)
-		hns3_vector_disable(&priv->tqp_vector[i]);
-
-	for (i = 0; i < h->kinfo.num_tqps; i++)
-		hns3_tqp_disable(h->kinfo.tqp[i]);
+	hns3_disable_irqs_and_tqps(ndev);
 
 	/* delay ring buffer clearing to hns3_reset_notify_uninit_enet
 	 * during reset process, because driver may not be able
@@ -5896,7 +5897,6 @@ void hns3_external_lb_restore(struct net_device *ndev, bool if_running)
 {
 	struct hns3_nic_priv *priv = netdev_priv(ndev);
 	struct hnae3_handle *h = priv->ae_handle;
-	int i;
 
 	if (!if_running)
 		return;
@@ -5912,11 +5912,7 @@ void hns3_external_lb_restore(struct net_device *ndev, bool if_running)
 
 	clear_bit(HNS3_NIC_STATE_DOWN, &priv->state);
 
-	for (i = 0; i < priv->vector_num; i++)
-		hns3_vector_enable(&priv->tqp_vector[i]);
-
-	for (i = 0; i < h->kinfo.num_tqps; i++)
-		hns3_tqp_enable(h->kinfo.tqp[i]);
+	hns3_enable_irqs_and_tqps(ndev);
 
 	netif_tx_wake_all_queues(ndev);
 
-- 
2.39.5

[PATCH 6.14 142/183] net: hns3: fixed debugfs tm_qset size

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hao Lan <lanhao@huawei.com>

[ Upstream commit e317aebeefcb3b0c71f2305af3c22871ca6b3833 ]

The size of the tm_qset file of debugfs is limited to 64 KB,
which is too small in the scenario with 1280 qsets.
The size needs to be expanded to 1 MB.

Fixes: 5e69ea7ee2a6 ("net: hns3: refactor the debugfs process")
Signed-off-by: Hao Lan <lanhao@huawei.com>
Signed-off-by: Peiyang Wang <wangpeiyang1@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Link: https://patch.msgid.link/20250430093052.2400464-4-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/hisilicon/hns3/hns3_debugfs.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_debugfs.c b/drivers/net/ethernet/hisilicon/hns3/hns3_debugfs.c
index 9bbece25552b1..3d70c97a0bedf 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3_debugfs.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3_debugfs.c
@@ -60,7 +60,7 @@ static struct hns3_dbg_cmd_info hns3_dbg_cmd[] = {
 		.name = "tm_qset",
 		.cmd = HNAE3_DBG_CMD_TM_QSET,
 		.dentry = HNS3_DBG_DENTRY_TM,
-		.buf_len = HNS3_DBG_READ_LEN,
+		.buf_len = HNS3_DBG_READ_LEN_1MB,
 		.init = hns3_dbg_common_file_init,
 	},
 	{
-- 
2.39.5

[PATCH 6.14 143/183] net: hns3: defer calling ptp_clock_register()

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jian Shen <shenjian15@huawei.com>

[ Upstream commit 4971394d9d624f91689d766f31ce668d169d9959 ]

Currently the ptp_clock_register() is called before relative
ptp resource ready. It may cause unexpected result when upper
layer called the ptp API during the timewindow. Fix it by
moving the ptp_clock_register() to the function end.

Fixes: 0bf5eb788512 ("net: hns3: add support for PTP")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20250430093052.2400464-5-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/ethernet/hisilicon/hns3/hns3pf/hclge_ptp.c  | 13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_ptp.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_ptp.c
index 181af419b878d..0ffda5146bae5 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_ptp.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_ptp.c
@@ -439,6 +439,13 @@ static int hclge_ptp_create_clock(struct hclge_dev *hdev)
 	ptp->info.settime64 = hclge_ptp_settime;
 
 	ptp->info.n_alarm = 0;
+
+	spin_lock_init(&ptp->lock);
+	ptp->io_base = hdev->hw.hw.io_base + HCLGE_PTP_REG_OFFSET;
+	ptp->ts_cfg.rx_filter = HWTSTAMP_FILTER_NONE;
+	ptp->ts_cfg.tx_type = HWTSTAMP_TX_OFF;
+	hdev->ptp = ptp;
+
 	ptp->clock = ptp_clock_register(&ptp->info, &hdev->pdev->dev);
 	if (IS_ERR(ptp->clock)) {
 		dev_err(&hdev->pdev->dev,
@@ -450,12 +457,6 @@ static int hclge_ptp_create_clock(struct hclge_dev *hdev)
 		return -ENODEV;
 	}
 
-	spin_lock_init(&ptp->lock);
-	ptp->io_base = hdev->hw.hw.io_base + HCLGE_PTP_REG_OFFSET;
-	ptp->ts_cfg.rx_filter = HWTSTAMP_FILTER_NONE;
-	ptp->ts_cfg.tx_type = HWTSTAMP_TX_OFF;
-	hdev->ptp = ptp;
-
 	return 0;
 }
 
-- 
2.39.5

[PATCH 6.14 144/183] net: vertexcom: mse102x: Fix possible stuck of SPI interrupt

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Stefan Wahren <wahrenst@gmx.net>

[ Upstream commit 55f362885951b2d00fd7fbb02ef0227deea572c2 ]

The MSE102x doesn't provide any SPI commands for interrupt handling.
So in case the interrupt fired before the driver requests the IRQ,
the interrupt will never fire again. In order to fix this always poll
for pending packets after opening the interface.

Fixes: 2f207cbf0dd4 ("net: vertexcom: Add MSE102x SPI support")
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250430133043.7722-2-wahrenst@gmx.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/vertexcom/mse102x.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/net/ethernet/vertexcom/mse102x.c b/drivers/net/ethernet/vertexcom/mse102x.c
index 89dc4c401a8de..92ebf16331598 100644
--- a/drivers/net/ethernet/vertexcom/mse102x.c
+++ b/drivers/net/ethernet/vertexcom/mse102x.c
@@ -509,6 +509,7 @@ static irqreturn_t mse102x_irq(int irq, void *_mse)
 static int mse102x_net_open(struct net_device *ndev)
 {
 	struct mse102x_net *mse = netdev_priv(ndev);
+	struct mse102x_net_spi *mses = to_mse102x_spi(mse);
 	int ret;
 
 	ret = request_threaded_irq(ndev->irq, NULL, mse102x_irq, IRQF_ONESHOT,
@@ -524,6 +525,13 @@ static int mse102x_net_open(struct net_device *ndev)
 
 	netif_carrier_on(ndev);
 
+	/* The SPI interrupt can stuck in case of pending packet(s).
+	 * So poll for possible packet(s) to re-arm the interrupt.
+	 */
+	mutex_lock(&mses->lock);
+	mse102x_rx_pkt_spi(mse);
+	mutex_unlock(&mses->lock);
+
 	netif_dbg(mse, ifup, ndev, "network device up\n");
 
 	return 0;
-- 
2.39.5

[PATCH 6.14 145/183] net: vertexcom: mse102x: Fix LEN_MASK

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Stefan Wahren <wahrenst@gmx.net>

[ Upstream commit 74987089ec678b4018dba0a609e9f4bf6ef7f4ad ]

The LEN_MASK for CMD_RTS doesn't cover the whole parameter mask.
The Bit 11 is reserved, so adjust LEN_MASK accordingly.

Fixes: 2f207cbf0dd4 ("net: vertexcom: Add MSE102x SPI support")
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250430133043.7722-3-wahrenst@gmx.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/vertexcom/mse102x.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/vertexcom/mse102x.c b/drivers/net/ethernet/vertexcom/mse102x.c
index 92ebf16331598..3edf2c3753f0e 100644
--- a/drivers/net/ethernet/vertexcom/mse102x.c
+++ b/drivers/net/ethernet/vertexcom/mse102x.c
@@ -33,7 +33,7 @@
 #define CMD_CTR		(0x2 << CMD_SHIFT)
 
 #define CMD_MASK	GENMASK(15, CMD_SHIFT)
-#define LEN_MASK	GENMASK(CMD_SHIFT - 1, 0)
+#define LEN_MASK	GENMASK(CMD_SHIFT - 2, 0)
 
 #define DET_CMD_LEN	4
 #define DET_SOF_LEN	2
-- 
2.39.5

[PATCH 6.14 146/183] net: vertexcom: mse102x: Add range check for CMD_RTS

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Stefan Wahren <wahrenst@gmx.net>

[ Upstream commit d4dda902dac194e3231a1ed0f76c6c3b6340ba8a ]

Since there is no protection in the SPI protocol against electrical
interferences, the driver shouldn't blindly trust the length payload
of CMD_RTS. So introduce a bounds check for incoming frames.

Fixes: 2f207cbf0dd4 ("net: vertexcom: Add MSE102x SPI support")
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250430133043.7722-4-wahrenst@gmx.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/vertexcom/mse102x.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/vertexcom/mse102x.c b/drivers/net/ethernet/vertexcom/mse102x.c
index 3edf2c3753f0e..2c06d1d05164f 100644
--- a/drivers/net/ethernet/vertexcom/mse102x.c
+++ b/drivers/net/ethernet/vertexcom/mse102x.c
@@ -6,6 +6,7 @@
 
 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 
+#include <linux/if_vlan.h>
 #include <linux/interrupt.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
@@ -337,8 +338,9 @@ static void mse102x_rx_pkt_spi(struct mse102x_net *mse)
 	}
 
 	rxlen = cmd_resp & LEN_MASK;
-	if (!rxlen) {
-		net_dbg_ratelimited("%s: No frame length defined\n", __func__);
+	if (rxlen < ETH_ZLEN || rxlen > VLAN_ETH_FRAME_LEN) {
+		net_dbg_ratelimited("%s: Invalid frame length: %d\n", __func__,
+				    rxlen);
 		mse->stats.invalid_len++;
 		return;
 	}
-- 
2.39.5

[PATCH 6.14 147/183] net: vertexcom: mse102x: Fix RX error handling

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Stefan Wahren <wahrenst@gmx.net>

[ Upstream commit ee512922ddd7d64afe2b28830a88f19063217649 ]

In case the CMD_RTS got corrupted by interferences, the MSE102x
doesn't allow a retransmission of the command. Instead the Ethernet
frame must be shifted out of the SPI FIFO. Since the actual length is
unknown, assume the maximum possible value.

Fixes: 2f207cbf0dd4 ("net: vertexcom: Add MSE102x SPI support")
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250430133043.7722-5-wahrenst@gmx.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/vertexcom/mse102x.c | 20 ++++++++++++++++----
 1 file changed, 16 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/vertexcom/mse102x.c b/drivers/net/ethernet/vertexcom/mse102x.c
index 2c06d1d05164f..e4d993f313740 100644
--- a/drivers/net/ethernet/vertexcom/mse102x.c
+++ b/drivers/net/ethernet/vertexcom/mse102x.c
@@ -263,7 +263,7 @@ static int mse102x_tx_frame_spi(struct mse102x_net *mse, struct sk_buff *txp,
 }
 
 static int mse102x_rx_frame_spi(struct mse102x_net *mse, u8 *buff,
-				unsigned int frame_len)
+				unsigned int frame_len, bool drop)
 {
 	struct mse102x_net_spi *mses = to_mse102x_spi(mse);
 	struct spi_transfer *xfer = &mses->spi_xfer;
@@ -281,6 +281,9 @@ static int mse102x_rx_frame_spi(struct mse102x_net *mse, u8 *buff,
 		netdev_err(mse->ndev, "%s: spi_sync() failed: %d\n",
 			   __func__, ret);
 		mse->stats.xfer_err++;
+	} else if (drop) {
+		netdev_dbg(mse->ndev, "%s: Drop frame\n", __func__);
+		ret = -EINVAL;
 	} else if (*sof != cpu_to_be16(DET_SOF)) {
 		netdev_dbg(mse->ndev, "%s: SPI start of frame is invalid (0x%04x)\n",
 			   __func__, *sof);
@@ -308,6 +311,7 @@ static void mse102x_rx_pkt_spi(struct mse102x_net *mse)
 	struct sk_buff *skb;
 	unsigned int rxalign;
 	unsigned int rxlen;
+	bool drop = false;
 	__be16 rx = 0;
 	u16 cmd_resp;
 	u8 *rxpkt;
@@ -330,7 +334,8 @@ static void mse102x_rx_pkt_spi(struct mse102x_net *mse)
 			net_dbg_ratelimited("%s: Unexpected response (0x%04x)\n",
 					    __func__, cmd_resp);
 			mse->stats.invalid_rts++;
-			return;
+			drop = true;
+			goto drop;
 		}
 
 		net_dbg_ratelimited("%s: Unexpected response to first CMD\n",
@@ -342,9 +347,16 @@ static void mse102x_rx_pkt_spi(struct mse102x_net *mse)
 		net_dbg_ratelimited("%s: Invalid frame length: %d\n", __func__,
 				    rxlen);
 		mse->stats.invalid_len++;
-		return;
+		drop = true;
 	}
 
+	/* In case of a invalid CMD_RTS, the frame must be consumed anyway.
+	 * So assume the maximum possible frame length.
+	 */
+drop:
+	if (drop)
+		rxlen = VLAN_ETH_FRAME_LEN;
+
 	rxalign = ALIGN(rxlen + DET_SOF_LEN + DET_DFT_LEN, 4);
 	skb = netdev_alloc_skb_ip_align(mse->ndev, rxalign);
 	if (!skb)
@@ -355,7 +367,7 @@ static void mse102x_rx_pkt_spi(struct mse102x_net *mse)
 	 * They are copied, but ignored.
 	 */
 	rxpkt = skb_put(skb, rxlen) - DET_SOF_LEN;
-	if (mse102x_rx_frame_spi(mse, rxpkt, rxlen)) {
+	if (mse102x_rx_frame_spi(mse, rxpkt, rxlen, drop)) {
 		mse->ndev->stats.rx_errors++;
 		dev_kfree_skb(skb);
 		return;
-- 
2.39.5

[PATCH 6.14 148/183] mm, slab: clean up slab->obj_exts always

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Zhenhua Huang <quic_zhenhuah@quicinc.com>

commit be8250786ca94952a19ce87f98ad9906448bc9ef upstream.

When memory allocation profiling is disabled at runtime or due to an
error, shutdown_mem_profiling() is called: slab->obj_exts which
previously allocated remains.
It won't be cleared by unaccount_slab() because of
mem_alloc_profiling_enabled() not true. It's incorrect, slab->obj_exts
should always be cleaned up in unaccount_slab() to avoid following error:

[...]BUG: Bad page state in process...
..
[...]page dumped because: page still charged to cgroup

[andriy.shevchenko@linux.intel.com: fold need_slab_obj_ext() into its only user]
Fixes: 21c690a349ba ("mm: introduce slabobj_ext to support slab object extensions")
Cc: stable@vger.kernel.org
Signed-off-by: Zhenhua Huang <quic_zhenhuah@quicinc.com>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: Harry Yoo <harry.yoo@oracle.com>
Tested-by: Harry Yoo <harry.yoo@oracle.com>
Acked-by: Suren Baghdasaryan <surenb@google.com>
Link: https://patch.msgid.link/20250421075232.2165527-1-quic_zhenhuah@quicinc.com
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
[surenb: fixed trivial merge conflict in alloc_tagging_slab_alloc_hook(),
skipped inlining free_slab_obj_exts() as it's already inline in 6.14]
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 mm/slub.c |   27 +++++++--------------------
 1 file changed, 7 insertions(+), 20 deletions(-)

--- a/mm/slub.c
+++ b/mm/slub.c
@@ -2025,18 +2025,6 @@ static inline void free_slab_obj_exts(st
 	slab->obj_exts = 0;
 }
 
-static inline bool need_slab_obj_ext(void)
-{
-	if (mem_alloc_profiling_enabled())
-		return true;
-
-	/*
-	 * CONFIG_MEMCG creates vector of obj_cgroup objects conditionally
-	 * inside memcg_slab_post_alloc_hook. No other users for now.
-	 */
-	return false;
-}
-
 #else /* CONFIG_SLAB_OBJ_EXT */
 
 static inline void init_slab_obj_exts(struct slab *slab)
@@ -2053,11 +2041,6 @@ static inline void free_slab_obj_exts(st
 {
 }
 
-static inline bool need_slab_obj_ext(void)
-{
-	return false;
-}
-
 #endif /* CONFIG_SLAB_OBJ_EXT */
 
 #ifdef CONFIG_MEM_ALLOC_PROFILING
@@ -2089,7 +2072,7 @@ prepare_slab_obj_exts_hook(struct kmem_c
 static inline void
 alloc_tagging_slab_alloc_hook(struct kmem_cache *s, void *object, gfp_t flags)
 {
-	if (need_slab_obj_ext()) {
+	if (mem_alloc_profiling_enabled()) {
 		struct slabobj_ext *obj_exts;
 
 		obj_exts = prepare_slab_obj_exts_hook(s, flags, object);
@@ -2565,8 +2548,12 @@ static __always_inline void account_slab
 static __always_inline void unaccount_slab(struct slab *slab, int order,
 					   struct kmem_cache *s)
 {
-	if (memcg_kmem_online() || need_slab_obj_ext())
-		free_slab_obj_exts(slab);
+	/*
+	 * The slab object extensions should now be freed regardless of
+	 * whether mem_alloc_profiling_enabled() or not because profiling
+	 * might have been disabled after slab->obj_exts got allocated.
+	 */
+	free_slab_obj_exts(slab);
 
 	mod_node_page_state(slab_pgdat(slab), cache_vmstat_idx(s),
 			    -(PAGE_SIZE << order));

[PATCH 6.14 149/183] accel/ivpu: Abort all jobs after command queue unregister

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Karol Wachowski <karol.wachowski@intel.com>

commit 5bbccadaf33eea2b879d8326ad59ae0663be47d1 upstream.

With hardware scheduler it is not expected to receive JOB_DONE
notifications from NPU FW for the jobs aborted due to command queue destroy
JSM command.

Remove jobs submitted to unregistered command queue from submitted_jobs_xa
to avoid triggering a TDR in such case.

Add explicit submitted_jobs_lock that protects access to list of submitted
jobs which is now used to find jobs to abort.

Move context abort procedure to separate work queue not to slow down
handling of IPCs or DCT requests in case where job abort takes longer,
especially when destruction of the last job of a specific context results
in context release.

Signed-off-by: Karol Wachowski <karol.wachowski@intel.com>
Signed-off-by: Maciej Falkowski <maciej.falkowski@linux.intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250107173238.381120-4-maciej.falkowski@linux.intel.com
[ This backport removes all the lines from upstream commit related to the
  command queue UAPI, as it is not present in the 6.14 kernel and should
  not be backported. ]
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/accel/ivpu/ivpu_drv.c   |   32 ++-------------
 drivers/accel/ivpu/ivpu_drv.h   |    2 
 drivers/accel/ivpu/ivpu_job.c   |   85 +++++++++++++++++++++++++++++++---------
 drivers/accel/ivpu/ivpu_job.h   |    1 
 drivers/accel/ivpu/ivpu_mmu.c   |    3 -
 drivers/accel/ivpu/ivpu_sysfs.c |    5 +-
 6 files changed, 79 insertions(+), 49 deletions(-)

--- a/drivers/accel/ivpu/ivpu_drv.c
+++ b/drivers/accel/ivpu/ivpu_drv.c
@@ -36,8 +36,6 @@
 #define DRIVER_VERSION_STR "1.0.0 " UTS_RELEASE
 #endif
 
-static struct lock_class_key submitted_jobs_xa_lock_class_key;
-
 int ivpu_dbg_mask;
 module_param_named(dbg_mask, ivpu_dbg_mask, int, 0644);
 MODULE_PARM_DESC(dbg_mask, "Driver debug mask. See IVPU_DBG_* macros.");
@@ -465,26 +463,6 @@ static const struct drm_driver driver =
 	.major = 1,
 };
 
-static void ivpu_context_abort_invalid(struct ivpu_device *vdev)
-{
-	struct ivpu_file_priv *file_priv;
-	unsigned long ctx_id;
-
-	mutex_lock(&vdev->context_list_lock);
-
-	xa_for_each(&vdev->context_xa, ctx_id, file_priv) {
-		if (!file_priv->has_mmu_faults || file_priv->aborted)
-			continue;
-
-		mutex_lock(&file_priv->lock);
-		ivpu_context_abort_locked(file_priv);
-		file_priv->aborted = true;
-		mutex_unlock(&file_priv->lock);
-	}
-
-	mutex_unlock(&vdev->context_list_lock);
-}
-
 static irqreturn_t ivpu_irq_thread_handler(int irq, void *arg)
 {
 	struct ivpu_device *vdev = arg;
@@ -498,9 +476,6 @@ static irqreturn_t ivpu_irq_thread_handl
 		case IVPU_HW_IRQ_SRC_IPC:
 			ivpu_ipc_irq_thread_handler(vdev);
 			break;
-		case IVPU_HW_IRQ_SRC_MMU_EVTQ:
-			ivpu_context_abort_invalid(vdev);
-			break;
 		case IVPU_HW_IRQ_SRC_DCT:
 			ivpu_pm_dct_irq_thread_handler(vdev);
 			break;
@@ -617,16 +592,21 @@ static int ivpu_dev_init(struct ivpu_dev
 	xa_init_flags(&vdev->context_xa, XA_FLAGS_ALLOC | XA_FLAGS_LOCK_IRQ);
 	xa_init_flags(&vdev->submitted_jobs_xa, XA_FLAGS_ALLOC1);
 	xa_init_flags(&vdev->db_xa, XA_FLAGS_ALLOC1);
-	lockdep_set_class(&vdev->submitted_jobs_xa.xa_lock, &submitted_jobs_xa_lock_class_key);
 	INIT_LIST_HEAD(&vdev->bo_list);
 
 	vdev->db_limit.min = IVPU_MIN_DB;
 	vdev->db_limit.max = IVPU_MAX_DB;
 
+	INIT_WORK(&vdev->context_abort_work, ivpu_context_abort_thread_handler);
+
 	ret = drmm_mutex_init(&vdev->drm, &vdev->context_list_lock);
 	if (ret)
 		goto err_xa_destroy;
 
+	ret = drmm_mutex_init(&vdev->drm, &vdev->submitted_jobs_lock);
+	if (ret)
+		goto err_xa_destroy;
+
 	ret = drmm_mutex_init(&vdev->drm, &vdev->bo_list_lock);
 	if (ret)
 		goto err_xa_destroy;
--- a/drivers/accel/ivpu/ivpu_drv.h
+++ b/drivers/accel/ivpu/ivpu_drv.h
@@ -137,6 +137,7 @@ struct ivpu_device {
 	struct mutex context_list_lock; /* Protects user context addition/removal */
 	struct xarray context_xa;
 	struct xa_limit context_xa_limit;
+	struct work_struct context_abort_work;
 
 	struct xarray db_xa;
 	struct xa_limit db_limit;
@@ -145,6 +146,7 @@ struct ivpu_device {
 	struct mutex bo_list_lock; /* Protects bo_list */
 	struct list_head bo_list;
 
+	struct mutex submitted_jobs_lock; /* Protects submitted_jobs */
 	struct xarray submitted_jobs_xa;
 	struct ivpu_ipc_consumer job_done_consumer;
 
--- a/drivers/accel/ivpu/ivpu_job.c
+++ b/drivers/accel/ivpu/ivpu_job.c
@@ -223,7 +223,8 @@ static int ivpu_cmdq_fini(struct ivpu_fi
 	if (vdev->fw->sched_mode == VPU_SCHEDULING_MODE_HW) {
 		ret = ivpu_jsm_hws_destroy_cmdq(vdev, file_priv->ctx.id, cmdq->id);
 		if (!ret)
-			ivpu_dbg(vdev, JOB, "Command queue %d destroyed\n", cmdq->id);
+			ivpu_dbg(vdev, JOB, "Command queue %d destroyed, ctx %d\n",
+				 cmdq->id, file_priv->ctx.id);
 	}
 
 	ret = ivpu_jsm_unregister_db(vdev, cmdq->db_id);
@@ -324,6 +325,8 @@ void ivpu_context_abort_locked(struct iv
 
 	if (vdev->fw->sched_mode == VPU_SCHEDULING_MODE_OS)
 		ivpu_jsm_context_release(vdev, file_priv->ctx.id);
+
+	file_priv->aborted = true;
 }
 
 static int ivpu_cmdq_push_job(struct ivpu_cmdq *cmdq, struct ivpu_job *job)
@@ -462,16 +465,14 @@ static struct ivpu_job *ivpu_job_remove_
 {
 	struct ivpu_job *job;
 
-	xa_lock(&vdev->submitted_jobs_xa);
-	job = __xa_erase(&vdev->submitted_jobs_xa, job_id);
+	lockdep_assert_held(&vdev->submitted_jobs_lock);
 
+	job = xa_erase(&vdev->submitted_jobs_xa, job_id);
 	if (xa_empty(&vdev->submitted_jobs_xa) && job) {
 		vdev->busy_time = ktime_add(ktime_sub(ktime_get(), vdev->busy_start_ts),
 					    vdev->busy_time);
 	}
 
-	xa_unlock(&vdev->submitted_jobs_xa);
-
 	return job;
 }
 
@@ -479,6 +480,8 @@ static int ivpu_job_signal_and_destroy(s
 {
 	struct ivpu_job *job;
 
+	lockdep_assert_held(&vdev->submitted_jobs_lock);
+
 	job = ivpu_job_remove_from_submitted_jobs(vdev, job_id);
 	if (!job)
 		return -ENOENT;
@@ -497,6 +500,10 @@ static int ivpu_job_signal_and_destroy(s
 	ivpu_stop_job_timeout_detection(vdev);
 
 	ivpu_rpm_put(vdev);
+
+	if (!xa_empty(&vdev->submitted_jobs_xa))
+		ivpu_start_job_timeout_detection(vdev);
+
 	return 0;
 }
 
@@ -505,8 +512,12 @@ void ivpu_jobs_abort_all(struct ivpu_dev
 	struct ivpu_job *job;
 	unsigned long id;
 
+	mutex_lock(&vdev->submitted_jobs_lock);
+
 	xa_for_each(&vdev->submitted_jobs_xa, id, job)
 		ivpu_job_signal_and_destroy(vdev, id, DRM_IVPU_JOB_STATUS_ABORTED);
+
+	mutex_unlock(&vdev->submitted_jobs_lock);
 }
 
 static int ivpu_job_submit(struct ivpu_job *job, u8 priority)
@@ -531,15 +542,16 @@ static int ivpu_job_submit(struct ivpu_j
 		goto err_unlock_file_priv;
 	}
 
-	xa_lock(&vdev->submitted_jobs_xa);
+	mutex_lock(&vdev->submitted_jobs_lock);
+
 	is_first_job = xa_empty(&vdev->submitted_jobs_xa);
-	ret = __xa_alloc_cyclic(&vdev->submitted_jobs_xa, &job->job_id, job, file_priv->job_limit,
-				&file_priv->job_id_next, GFP_KERNEL);
+	ret = xa_alloc_cyclic(&vdev->submitted_jobs_xa, &job->job_id, job, file_priv->job_limit,
+			      &file_priv->job_id_next, GFP_KERNEL);
 	if (ret < 0) {
 		ivpu_dbg(vdev, JOB, "Too many active jobs in ctx %d\n",
 			 file_priv->ctx.id);
 		ret = -EBUSY;
-		goto err_unlock_submitted_jobs_xa;
+		goto err_unlock_submitted_jobs;
 	}
 
 	ret = ivpu_cmdq_push_job(cmdq, job);
@@ -562,19 +574,21 @@ static int ivpu_job_submit(struct ivpu_j
 		 job->job_id, file_priv->ctx.id, job->engine_idx, priority,
 		 job->cmd_buf_vpu_addr, cmdq->jobq->header.tail);
 
-	xa_unlock(&vdev->submitted_jobs_xa);
-
+	mutex_unlock(&vdev->submitted_jobs_lock);
 	mutex_unlock(&file_priv->lock);
 
-	if (unlikely(ivpu_test_mode & IVPU_TEST_MODE_NULL_HW))
+	if (unlikely(ivpu_test_mode & IVPU_TEST_MODE_NULL_HW)) {
+		mutex_lock(&vdev->submitted_jobs_lock);
 		ivpu_job_signal_and_destroy(vdev, job->job_id, VPU_JSM_STATUS_SUCCESS);
+		mutex_unlock(&vdev->submitted_jobs_lock);
+	}
 
 	return 0;
 
 err_erase_xa:
-	__xa_erase(&vdev->submitted_jobs_xa, job->job_id);
-err_unlock_submitted_jobs_xa:
-	xa_unlock(&vdev->submitted_jobs_xa);
+	xa_erase(&vdev->submitted_jobs_xa, job->job_id);
+err_unlock_submitted_jobs:
+	mutex_unlock(&vdev->submitted_jobs_lock);
 err_unlock_file_priv:
 	mutex_unlock(&file_priv->lock);
 	ivpu_rpm_put(vdev);
@@ -745,7 +759,6 @@ ivpu_job_done_callback(struct ivpu_devic
 		       struct vpu_jsm_msg *jsm_msg)
 {
 	struct vpu_ipc_msg_payload_job_done *payload;
-	int ret;
 
 	if (!jsm_msg) {
 		ivpu_err(vdev, "IPC message has no JSM payload\n");
@@ -758,9 +771,10 @@ ivpu_job_done_callback(struct ivpu_devic
 	}
 
 	payload = (struct vpu_ipc_msg_payload_job_done *)&jsm_msg->payload;
-	ret = ivpu_job_signal_and_destroy(vdev, payload->job_id, payload->job_status);
-	if (!ret && !xa_empty(&vdev->submitted_jobs_xa))
-		ivpu_start_job_timeout_detection(vdev);
+
+	mutex_lock(&vdev->submitted_jobs_lock);
+	ivpu_job_signal_and_destroy(vdev, payload->job_id, payload->job_status);
+	mutex_unlock(&vdev->submitted_jobs_lock);
 }
 
 void ivpu_job_done_consumer_init(struct ivpu_device *vdev)
@@ -773,3 +787,36 @@ void ivpu_job_done_consumer_fini(struct
 {
 	ivpu_ipc_consumer_del(vdev, &vdev->job_done_consumer);
 }
+
+void ivpu_context_abort_thread_handler(struct work_struct *work)
+{
+	struct ivpu_device *vdev = container_of(work, struct ivpu_device, context_abort_work);
+	struct ivpu_file_priv *file_priv;
+	unsigned long ctx_id;
+	struct ivpu_job *job;
+	unsigned long id;
+
+	mutex_lock(&vdev->context_list_lock);
+	xa_for_each(&vdev->context_xa, ctx_id, file_priv) {
+		if (!file_priv->has_mmu_faults || file_priv->aborted)
+			continue;
+
+		mutex_lock(&file_priv->lock);
+		ivpu_context_abort_locked(file_priv);
+		mutex_unlock(&file_priv->lock);
+	}
+	mutex_unlock(&vdev->context_list_lock);
+
+	if (vdev->fw->sched_mode != VPU_SCHEDULING_MODE_HW)
+		return;
+	/*
+	 * In hardware scheduling mode NPU already has stopped processing jobs
+	 * and won't send us any further notifications, thus we have to free job related resources
+	 * and notify userspace
+	 */
+	mutex_lock(&vdev->submitted_jobs_lock);
+	xa_for_each(&vdev->submitted_jobs_xa, id, job)
+		if (job->file_priv->aborted)
+			ivpu_job_signal_and_destroy(vdev, job->job_id, DRM_IVPU_JOB_STATUS_ABORTED);
+	mutex_unlock(&vdev->submitted_jobs_lock);
+}
--- a/drivers/accel/ivpu/ivpu_job.h
+++ b/drivers/accel/ivpu/ivpu_job.h
@@ -66,6 +66,7 @@ void ivpu_cmdq_reset_all_contexts(struct
 
 void ivpu_job_done_consumer_init(struct ivpu_device *vdev);
 void ivpu_job_done_consumer_fini(struct ivpu_device *vdev);
+void ivpu_context_abort_thread_handler(struct work_struct *work);
 
 void ivpu_jobs_abort_all(struct ivpu_device *vdev);
 
--- a/drivers/accel/ivpu/ivpu_mmu.c
+++ b/drivers/accel/ivpu/ivpu_mmu.c
@@ -890,8 +890,7 @@ void ivpu_mmu_irq_evtq_handler(struct iv
 		REGV_WR32(IVPU_MMU_REG_EVTQ_CONS_SEC, vdev->mmu->evtq.cons);
 	}
 
-	if (!kfifo_put(&vdev->hw->irq.fifo, IVPU_HW_IRQ_SRC_MMU_EVTQ))
-		ivpu_err_ratelimited(vdev, "IRQ FIFO full\n");
+	queue_work(system_wq, &vdev->context_abort_work);
 }
 
 void ivpu_mmu_evtq_dump(struct ivpu_device *vdev)
--- a/drivers/accel/ivpu/ivpu_sysfs.c
+++ b/drivers/accel/ivpu/ivpu_sysfs.c
@@ -30,11 +30,12 @@ npu_busy_time_us_show(struct device *dev
 	struct ivpu_device *vdev = to_ivpu_device(drm);
 	ktime_t total, now = 0;
 
-	xa_lock(&vdev->submitted_jobs_xa);
+	mutex_lock(&vdev->submitted_jobs_lock);
+
 	total = vdev->busy_time;
 	if (!xa_empty(&vdev->submitted_jobs_xa))
 		now = ktime_sub(ktime_get(), vdev->busy_start_ts);
-	xa_unlock(&vdev->submitted_jobs_xa);
+	mutex_unlock(&vdev->submitted_jobs_lock);
 
 	return sysfs_emit(buf, "%lld\n", ktime_to_us(ktime_add(total, now)));
 }

[PATCH 6.14 150/183] accel/ivpu: Fix locking order in ivpu_job_submit

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Karol Wachowski <karol.wachowski@intel.com>

commit ab680dc6c78aa035e944ecc8c48a1caab9f39924 upstream.

Fix deadlock in job submission and abort handling.
When a thread aborts currently executing jobs due to a fault,
it first locks the global lock protecting submitted_jobs (#1).

After the last job is destroyed, it proceeds to release the related context
and locks file_priv (#2). Meanwhile, in the job submission thread,
the file_priv lock (#2) is taken first, and then the submitted_jobs
lock (#1) is obtained when a job is added to the submitted jobs list.

       CPU0                            CPU1
       ----                    	       ----
  (for example due to a fault)         (jobs submissions keep coming)

  lock(&vdev->submitted_jobs_lock) #1
  ivpu_jobs_abort_all()
  job_destroy()
                                      lock(&file_priv->lock)           #2
                                      lock(&vdev->submitted_jobs_lock) #1
  file_priv_release()
  lock(&vdev->context_list_lock)
  lock(&file_priv->lock)           #2

This order of locking causes a deadlock. To resolve this issue,
change the order of locking in ivpu_job_submit().

Signed-off-by: Karol Wachowski <karol.wachowski@intel.com>
Signed-off-by: Maciej Falkowski <maciej.falkowski@linux.intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250107173238.381120-12-maciej.falkowski@linux.intel.com
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
[ This backport required small adjustments to ivpu_job_submit(),
  which lacks support for explicit command queue creation added in 6.15.  ]
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/accel/ivpu/ivpu_job.c |   15 ++++++---------
 1 file changed, 6 insertions(+), 9 deletions(-)

--- a/drivers/accel/ivpu/ivpu_job.c
+++ b/drivers/accel/ivpu/ivpu_job.c
@@ -532,6 +532,7 @@ static int ivpu_job_submit(struct ivpu_j
 	if (ret < 0)
 		return ret;
 
+	mutex_lock(&vdev->submitted_jobs_lock);
 	mutex_lock(&file_priv->lock);
 
 	cmdq = ivpu_cmdq_acquire(file_priv, priority);
@@ -539,11 +540,9 @@ static int ivpu_job_submit(struct ivpu_j
 		ivpu_warn_ratelimited(vdev, "Failed to get job queue, ctx %d engine %d prio %d\n",
 				      file_priv->ctx.id, job->engine_idx, priority);
 		ret = -EINVAL;
-		goto err_unlock_file_priv;
+		goto err_unlock;
 	}
 
-	mutex_lock(&vdev->submitted_jobs_lock);
-
 	is_first_job = xa_empty(&vdev->submitted_jobs_xa);
 	ret = xa_alloc_cyclic(&vdev->submitted_jobs_xa, &job->job_id, job, file_priv->job_limit,
 			      &file_priv->job_id_next, GFP_KERNEL);
@@ -551,7 +550,7 @@ static int ivpu_job_submit(struct ivpu_j
 		ivpu_dbg(vdev, JOB, "Too many active jobs in ctx %d\n",
 			 file_priv->ctx.id);
 		ret = -EBUSY;
-		goto err_unlock_submitted_jobs;
+		goto err_unlock;
 	}
 
 	ret = ivpu_cmdq_push_job(cmdq, job);
@@ -574,22 +573,20 @@ static int ivpu_job_submit(struct ivpu_j
 		 job->job_id, file_priv->ctx.id, job->engine_idx, priority,
 		 job->cmd_buf_vpu_addr, cmdq->jobq->header.tail);
 
-	mutex_unlock(&vdev->submitted_jobs_lock);
 	mutex_unlock(&file_priv->lock);
 
 	if (unlikely(ivpu_test_mode & IVPU_TEST_MODE_NULL_HW)) {
-		mutex_lock(&vdev->submitted_jobs_lock);
 		ivpu_job_signal_and_destroy(vdev, job->job_id, VPU_JSM_STATUS_SUCCESS);
-		mutex_unlock(&vdev->submitted_jobs_lock);
 	}
 
+	mutex_unlock(&vdev->submitted_jobs_lock);
+
 	return 0;
 
 err_erase_xa:
 	xa_erase(&vdev->submitted_jobs_xa, job->job_id);
-err_unlock_submitted_jobs:
+err_unlock:
 	mutex_unlock(&vdev->submitted_jobs_lock);
-err_unlock_file_priv:
 	mutex_unlock(&file_priv->lock);
 	ivpu_rpm_put(vdev);
 	return ret;

[PATCH 6.14 151/183] accel/ivpu: Add handling of VPU_JSM_STATUS_MVNCI_CONTEXT_VIOLATION_HW

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Karol Wachowski <karol.wachowski@intel.com>

commit dad945c27a42dfadddff1049cf5ae417209a8996 upstream.

Mark as invalid context of a job that returned HW context violation
error and queue work that aborts jobs from faulty context.
Add engine reset to the context abort thread handler to not only abort
currently executing jobs but also to ensure NPU invalid state recovery.

Signed-off-by: Karol Wachowski <karol.wachowski@intel.com>
Signed-off-by: Maciej Falkowski <maciej.falkowski@linux.intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250107173238.381120-13-maciej.falkowski@linux.intel.com
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/accel/ivpu/ivpu_job.c |   25 +++++++++++++++++++++++++
 1 file changed, 25 insertions(+)

--- a/drivers/accel/ivpu/ivpu_job.c
+++ b/drivers/accel/ivpu/ivpu_job.c
@@ -482,6 +482,26 @@ static int ivpu_job_signal_and_destroy(s
 
 	lockdep_assert_held(&vdev->submitted_jobs_lock);
 
+	job = xa_load(&vdev->submitted_jobs_xa, job_id);
+	if (!job)
+		return -ENOENT;
+
+	if (job_status == VPU_JSM_STATUS_MVNCI_CONTEXT_VIOLATION_HW) {
+		guard(mutex)(&job->file_priv->lock);
+
+		if (job->file_priv->has_mmu_faults)
+			return 0;
+
+		/*
+		 * Mark context as faulty and defer destruction of the job to jobs abort thread
+		 * handler to synchronize between both faults and jobs returning context violation
+		 * status and ensure both are handled in the same way
+		 */
+		job->file_priv->has_mmu_faults = true;
+		queue_work(system_wq, &vdev->context_abort_work);
+		return 0;
+	}
+
 	job = ivpu_job_remove_from_submitted_jobs(vdev, job_id);
 	if (!job)
 		return -ENOENT;
@@ -793,6 +813,9 @@ void ivpu_context_abort_thread_handler(s
 	struct ivpu_job *job;
 	unsigned long id;
 
+	if (vdev->fw->sched_mode == VPU_SCHEDULING_MODE_HW)
+		ivpu_jsm_reset_engine(vdev, 0);
+
 	mutex_lock(&vdev->context_list_lock);
 	xa_for_each(&vdev->context_xa, ctx_id, file_priv) {
 		if (!file_priv->has_mmu_faults || file_priv->aborted)
@@ -806,6 +829,8 @@ void ivpu_context_abort_thread_handler(s
 
 	if (vdev->fw->sched_mode != VPU_SCHEDULING_MODE_HW)
 		return;
+
+	ivpu_jsm_hws_resume_engine(vdev, 0);
 	/*
 	 * In hardware scheduling mode NPU already has stopped processing jobs
 	 * and won't send us any further notifications, thus we have to free job related resources

[PATCH 6.14 152/183] drm/xe: Invalidate L3 read-only cachelines for geometry streams too

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Kenneth Graunke <kenneth@whitecape.org>

commit e775278cd75f24a2758c28558c4e41b36c935740 upstream.

Historically, the Vertex Fetcher unit has not been an L3 client.  That
meant that, when a buffer containing vertex data was written to, it was
necessary to issue a PIPE_CONTROL::VF Cache Invalidate to invalidate any
VF L2 cachelines associated with that buffer, so the new value would be
properly read from memory.

Since Tigerlake and later, VERTEX_BUFFER_STATE and 3DSTATE_INDEX_BUFFER
have included an "L3 Bypass Enable" bit which userspace drivers can set
to request that the vertex fetcher unit snoop L3.  However, unlike most
true L3 clients, the "VF Cache Invalidate" bit continues to only
invalidate the VF L2 cache - and not any associated L3 lines.

To handle that, PIPE_CONTROL has a new "L3 Read Only Cache Invalidation
Bit", which according to the docs, "controls the invalidation of the
Geometry streams cached in L3 cache at the top of the pipe."  In other
words, the vertex and index buffer data that gets cached in L3 when
"L3 Bypass Disable" is set.

Mesa always sets L3 Bypass Disable so that the VF unit snoops L3, and
whenever it issues a VF Cache Invalidate, it also issues a L3 Read Only
Cache Invalidate so that both L2 and L3 vertex data is invalidated.

xe is issuing VF cache invalidates too (which handles cases like CPU
writes to a buffer between GPU batches).  Because userspace may enable
L3 snooping, it needs to issue an L3 Read Only Cache Invalidate as well.

Fixes significant flickering in Firefox on Meteorlake, which was writing
to vertex buffers via the CPU between batches; the missing L3 Read Only
invalidates were causing the vertex fetcher to read stale data from L3.

Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/4460
Fixes: 6ef3bb60557d ("drm/xe: enable lite restore")
Cc: stable@vger.kernel.org # v6.13+
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/20250330165923.56410-1-rodrigo.vivi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit 61672806b579dd5a150a042ec9383be2bbc2ae7e)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpu/drm/xe/instructions/xe_gpu_commands.h |    1 +
 drivers/gpu/drm/xe/xe_ring_ops.c                  |   13 +++++++++----
 2 files changed, 10 insertions(+), 4 deletions(-)

--- a/drivers/gpu/drm/xe/instructions/xe_gpu_commands.h
+++ b/drivers/gpu/drm/xe/instructions/xe_gpu_commands.h
@@ -41,6 +41,7 @@
 
 #define GFX_OP_PIPE_CONTROL(len)	((0x3<<29)|(0x3<<27)|(0x2<<24)|((len)-2))
 
+#define	  PIPE_CONTROL0_L3_READ_ONLY_CACHE_INVALIDATE	BIT(10)	/* gen12 */
 #define	  PIPE_CONTROL0_HDC_PIPELINE_FLUSH		BIT(9)	/* gen12 */
 
 #define   PIPE_CONTROL_COMMAND_CACHE_INVALIDATE		(1<<29)
--- a/drivers/gpu/drm/xe/xe_ring_ops.c
+++ b/drivers/gpu/drm/xe/xe_ring_ops.c
@@ -141,7 +141,8 @@ emit_pipe_control(u32 *dw, int i, u32 bi
 static int emit_pipe_invalidate(u32 mask_flags, bool invalidate_tlb, u32 *dw,
 				int i)
 {
-	u32 flags = PIPE_CONTROL_CS_STALL |
+	u32 flags0 = 0;
+	u32 flags1 = PIPE_CONTROL_CS_STALL |
 		PIPE_CONTROL_COMMAND_CACHE_INVALIDATE |
 		PIPE_CONTROL_INSTRUCTION_CACHE_INVALIDATE |
 		PIPE_CONTROL_TEXTURE_CACHE_INVALIDATE |
@@ -152,11 +153,15 @@ static int emit_pipe_invalidate(u32 mask
 		PIPE_CONTROL_STORE_DATA_INDEX;
 
 	if (invalidate_tlb)
-		flags |= PIPE_CONTROL_TLB_INVALIDATE;
+		flags1 |= PIPE_CONTROL_TLB_INVALIDATE;
 
-	flags &= ~mask_flags;
+	flags1 &= ~mask_flags;
 
-	return emit_pipe_control(dw, i, 0, flags, LRC_PPHWSP_SCRATCH_ADDR, 0);
+	if (flags1 & PIPE_CONTROL_VF_CACHE_INVALIDATE)
+		flags0 |= PIPE_CONTROL0_L3_READ_ONLY_CACHE_INVALIDATE;
+
+	return emit_pipe_control(dw, i, flags0, flags1,
+				 LRC_PPHWSP_SCRATCH_ADDR, 0);
 }
 
 static int emit_store_imm_ppgtt_posted(u64 addr, u64 value,

[PATCH 6.14 153/183] platform/x86: alienware-wmi-wmax: Add support for Alienware m15 R7

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Kurt Borja <kuurtb@gmail.com>

commit 246f9bb62016c423972ea7f2335a8e0ed3521cde upstream.

Extend thermal control support to Alienware m15 R7.

Cc: stable@vger.kernel.org
Tested-by: Romain THERY <romain.thery@ik.me>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Link: https://lore.kernel.org/r/20250419-m15-r7-v1-1-18c6eaa27e25@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/platform/x86/dell/alienware-wmi.c |    9 +++++++++
 1 file changed, 9 insertions(+)

--- a/drivers/platform/x86/dell/alienware-wmi.c
+++ b/drivers/platform/x86/dell/alienware-wmi.c
@@ -252,6 +252,15 @@ static const struct dmi_system_id alienw
 	},
 	{
 		.callback = dmi_matched,
+		.ident = "Alienware m15 R7",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Alienware"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Alienware m15 R7"),
+		},
+		.driver_data = &quirk_x_series,
+	},
+	{
+		.callback = dmi_matched,
 		.ident = "Alienware m16 R1",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Alienware"),

[PATCH 6.14 154/183] ublk: add helper of ublk_need_map_io()

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ming Lei <ming.lei@redhat.com>

[ Upstream commit 1d781c0de08c0b35948ad4aaf609a4cc9995d9f6 ]

ublk_need_map_io() is more readable.

Reviewed-by: Caleb Sander Mateos <csander@purestorage.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250327095123.179113-5-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/block/ublk_drv.c |   13 +++++++++----
 1 file changed, 9 insertions(+), 4 deletions(-)

--- a/drivers/block/ublk_drv.c
+++ b/drivers/block/ublk_drv.c
@@ -594,6 +594,11 @@ static inline bool ublk_support_user_cop
 	return ubq->flags & UBLK_F_USER_COPY;
 }
 
+static inline bool ublk_need_map_io(const struct ublk_queue *ubq)
+{
+	return !ublk_support_user_copy(ubq);
+}
+
 static inline bool ublk_need_req_ref(const struct ublk_queue *ubq)
 {
 	/*
@@ -921,7 +926,7 @@ static int ublk_map_io(const struct ublk
 {
 	const unsigned int rq_bytes = blk_rq_bytes(req);
 
-	if (ublk_support_user_copy(ubq))
+	if (!ublk_need_map_io(ubq))
 		return rq_bytes;
 
 	/*
@@ -945,7 +950,7 @@ static int ublk_unmap_io(const struct ub
 {
 	const unsigned int rq_bytes = blk_rq_bytes(req);
 
-	if (ublk_support_user_copy(ubq))
+	if (!ublk_need_map_io(ubq))
 		return rq_bytes;
 
 	if (ublk_need_unmap_req(req)) {
@@ -1914,7 +1919,7 @@ static int __ublk_ch_uring_cmd(struct io
 		if (io->flags & UBLK_IO_FLAG_OWNED_BY_SRV)
 			goto out;
 
-		if (!ublk_support_user_copy(ubq)) {
+		if (ublk_need_map_io(ubq)) {
 			/*
 			 * FETCH_RQ has to provide IO buffer if NEED GET
 			 * DATA is not enabled
@@ -1936,7 +1941,7 @@ static int __ublk_ch_uring_cmd(struct io
 		if (!(io->flags & UBLK_IO_FLAG_OWNED_BY_SRV))
 			goto out;
 
-		if (!ublk_support_user_copy(ubq)) {
+		if (ublk_need_map_io(ubq)) {
 			/*
 			 * COMMIT_AND_FETCH_REQ has to provide IO buffer if
 			 * NEED GET DATA is not enabled or it is Read IO.

[PATCH 6.14 155/183] ublk: properly serialize all FETCH_REQs

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Uday Shankar <ushankar@purestorage.com>

[ Upstream commit b69b8edfb27dfa563cd53f590ec42b481f9eb174 ]

Most uring_cmds issued against ublk character devices are serialized
because each command affects only one queue, and there is an early check
which only allows a single task (the queue's ubq_daemon) to issue
uring_cmds against that queue. However, this mechanism does not work for
FETCH_REQs, since they are expected before ubq_daemon is set. Since
FETCH_REQs are only used at initialization and not in the fast path,
serialize them using the per-ublk-device mutex. This fixes a number of
data races that were previously possible if a badly behaved ublk server
decided to issue multiple FETCH_REQs against the same qid/tag
concurrently.

Reported-by: Caleb Sander Mateos <csander@purestorage.com>
Signed-off-by: Uday Shankar <ushankar@purestorage.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250416035444.99569-2-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/block/ublk_drv.c |   77 +++++++++++++++++++++++++++++------------------
 1 file changed, 49 insertions(+), 28 deletions(-)

--- a/drivers/block/ublk_drv.c
+++ b/drivers/block/ublk_drv.c
@@ -1803,8 +1803,8 @@ static void ublk_nosrv_work(struct work_
 
 /* device can only be started after all IOs are ready */
 static void ublk_mark_io_ready(struct ublk_device *ub, struct ublk_queue *ubq)
+	__must_hold(&ub->mutex)
 {
-	mutex_lock(&ub->mutex);
 	ubq->nr_io_ready++;
 	if (ublk_queue_ready(ubq)) {
 		ubq->ubq_daemon = current;
@@ -1816,7 +1816,6 @@ static void ublk_mark_io_ready(struct ub
 	}
 	if (ub->nr_queues_ready == ub->dev_info.nr_hw_queues)
 		complete_all(&ub->completion);
-	mutex_unlock(&ub->mutex);
 }
 
 static inline int ublk_check_cmd_op(u32 cmd_op)
@@ -1855,6 +1854,52 @@ static inline void ublk_prep_cancel(stru
 	io_uring_cmd_mark_cancelable(cmd, issue_flags);
 }
 
+static int ublk_fetch(struct io_uring_cmd *cmd, struct ublk_queue *ubq,
+		      struct ublk_io *io, __u64 buf_addr)
+{
+	struct ublk_device *ub = ubq->dev;
+	int ret = 0;
+
+	/*
+	 * When handling FETCH command for setting up ublk uring queue,
+	 * ub->mutex is the innermost lock, and we won't block for handling
+	 * FETCH, so it is fine even for IO_URING_F_NONBLOCK.
+	 */
+	mutex_lock(&ub->mutex);
+	/* UBLK_IO_FETCH_REQ is only allowed before queue is setup */
+	if (ublk_queue_ready(ubq)) {
+		ret = -EBUSY;
+		goto out;
+	}
+
+	/* allow each command to be FETCHed at most once */
+	if (io->flags & UBLK_IO_FLAG_ACTIVE) {
+		ret = -EINVAL;
+		goto out;
+	}
+
+	WARN_ON_ONCE(io->flags & UBLK_IO_FLAG_OWNED_BY_SRV);
+
+	if (ublk_need_map_io(ubq)) {
+		/*
+		 * FETCH_RQ has to provide IO buffer if NEED GET
+		 * DATA is not enabled
+		 */
+		if (!buf_addr && !ublk_need_get_data(ubq))
+			goto out;
+	} else if (buf_addr) {
+		/* User copy requires addr to be unset */
+		ret = -EINVAL;
+		goto out;
+	}
+
+	ublk_fill_io_cmd(io, cmd, buf_addr);
+	ublk_mark_io_ready(ub, ubq);
+out:
+	mutex_unlock(&ub->mutex);
+	return ret;
+}
+
 static int __ublk_ch_uring_cmd(struct io_uring_cmd *cmd,
 			       unsigned int issue_flags,
 			       const struct ublksrv_io_cmd *ub_cmd)
@@ -1907,33 +1952,9 @@ static int __ublk_ch_uring_cmd(struct io
 	ret = -EINVAL;
 	switch (_IOC_NR(cmd_op)) {
 	case UBLK_IO_FETCH_REQ:
-		/* UBLK_IO_FETCH_REQ is only allowed before queue is setup */
-		if (ublk_queue_ready(ubq)) {
-			ret = -EBUSY;
-			goto out;
-		}
-		/*
-		 * The io is being handled by server, so COMMIT_RQ is expected
-		 * instead of FETCH_REQ
-		 */
-		if (io->flags & UBLK_IO_FLAG_OWNED_BY_SRV)
-			goto out;
-
-		if (ublk_need_map_io(ubq)) {
-			/*
-			 * FETCH_RQ has to provide IO buffer if NEED GET
-			 * DATA is not enabled
-			 */
-			if (!ub_cmd->addr && !ublk_need_get_data(ubq))
-				goto out;
-		} else if (ub_cmd->addr) {
-			/* User copy requires addr to be unset */
-			ret = -EINVAL;
+		ret = ublk_fetch(cmd, ubq, io, ub_cmd->addr);
+		if (ret)
 			goto out;
-		}
-
-		ublk_fill_io_cmd(io, cmd, ub_cmd->addr);
-		ublk_mark_io_ready(ub, ubq);
 		break;
 	case UBLK_IO_COMMIT_AND_FETCH_REQ:
 		req = blk_mq_tag_to_rq(ub->tag_set.tags[ub_cmd->q_id], tag);

[PATCH 6.14 156/183] ublk: move device reset into ublk_ch_release()

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ming Lei <ming.lei@redhat.com>

[ Upstream commit 728cbac5fe219d3b8a21a0688a08f2b7f8aeda2b ]

ublk_ch_release() is called after ublk char device is closed, when all
uring_cmd are done, so it is perfect fine to move ublk device reset to
ublk_ch_release() from ublk_ctrl_start_recovery().

This way can avoid to grab the exiting daemon task_struct too long.

However, reset of the following ublk IO flags has to be moved until ublk
io_uring queues are ready:

- ubq->canceling

For requeuing IO in case of ublk_nosrv_dev_should_queue_io() before device
is recovered

- ubq->fail_io

For failing IO in case of UBLK_F_USER_RECOVERY_FAIL_IO before device is
recovered

- ublk_io->flags

For preventing using io->cmd

With this way, recovery is simplified a lot.

Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250416035444.99569-5-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/block/ublk_drv.c |  121 +++++++++++++++++++++++++++--------------------
 1 file changed, 72 insertions(+), 49 deletions(-)

--- a/drivers/block/ublk_drv.c
+++ b/drivers/block/ublk_drv.c
@@ -1043,7 +1043,7 @@ static inline struct ublk_uring_cmd_pdu
 
 static inline bool ubq_daemon_is_dying(struct ublk_queue *ubq)
 {
-	return ubq->ubq_daemon->flags & PF_EXITING;
+	return !ubq->ubq_daemon || ubq->ubq_daemon->flags & PF_EXITING;
 }
 
 /* todo: handle partial completion */
@@ -1440,6 +1440,37 @@ static const struct blk_mq_ops ublk_mq_o
 	.timeout	= ublk_timeout,
 };
 
+static void ublk_queue_reinit(struct ublk_device *ub, struct ublk_queue *ubq)
+{
+	int i;
+
+	/* All old ioucmds have to be completed */
+	ubq->nr_io_ready = 0;
+
+	/*
+	 * old daemon is PF_EXITING, put it now
+	 *
+	 * It could be NULL in case of closing one quisced device.
+	 */
+	if (ubq->ubq_daemon)
+		put_task_struct(ubq->ubq_daemon);
+	/* We have to reset it to NULL, otherwise ub won't accept new FETCH_REQ */
+	ubq->ubq_daemon = NULL;
+	ubq->timeout = false;
+
+	for (i = 0; i < ubq->q_depth; i++) {
+		struct ublk_io *io = &ubq->ios[i];
+
+		/*
+		 * UBLK_IO_FLAG_CANCELED is kept for avoiding to touch
+		 * io->cmd
+		 */
+		io->flags &= UBLK_IO_FLAG_CANCELED;
+		io->cmd = NULL;
+		io->addr = 0;
+	}
+}
+
 static int ublk_ch_open(struct inode *inode, struct file *filp)
 {
 	struct ublk_device *ub = container_of(inode->i_cdev,
@@ -1451,10 +1482,26 @@ static int ublk_ch_open(struct inode *in
 	return 0;
 }
 
+static void ublk_reset_ch_dev(struct ublk_device *ub)
+{
+	int i;
+
+	for (i = 0; i < ub->dev_info.nr_hw_queues; i++)
+		ublk_queue_reinit(ub, ublk_get_queue(ub, i));
+
+	/* set to NULL, otherwise new ubq_daemon cannot mmap the io_cmd_buf */
+	ub->mm = NULL;
+	ub->nr_queues_ready = 0;
+	ub->nr_privileged_daemon = 0;
+}
+
 static int ublk_ch_release(struct inode *inode, struct file *filp)
 {
 	struct ublk_device *ub = filp->private_data;
 
+	/* all uring_cmd has been done now, reset device & ubq */
+	ublk_reset_ch_dev(ub);
+
 	clear_bit(UB_STATE_OPEN, &ub->state);
 	return 0;
 }
@@ -1801,6 +1848,24 @@ static void ublk_nosrv_work(struct work_
 	ublk_cancel_dev(ub);
 }
 
+/* reset ublk io_uring queue & io flags */
+static void ublk_reset_io_flags(struct ublk_device *ub)
+{
+	int i, j;
+
+	for (i = 0; i < ub->dev_info.nr_hw_queues; i++) {
+		struct ublk_queue *ubq = ublk_get_queue(ub, i);
+
+		/* UBLK_IO_FLAG_CANCELED can be cleared now */
+		spin_lock(&ubq->cancel_lock);
+		for (j = 0; j < ubq->q_depth; j++)
+			ubq->ios[j].flags &= ~UBLK_IO_FLAG_CANCELED;
+		spin_unlock(&ubq->cancel_lock);
+		ubq->canceling = false;
+		ubq->fail_io = false;
+	}
+}
+
 /* device can only be started after all IOs are ready */
 static void ublk_mark_io_ready(struct ublk_device *ub, struct ublk_queue *ubq)
 	__must_hold(&ub->mutex)
@@ -1814,8 +1879,12 @@ static void ublk_mark_io_ready(struct ub
 		if (capable(CAP_SYS_ADMIN))
 			ub->nr_privileged_daemon++;
 	}
-	if (ub->nr_queues_ready == ub->dev_info.nr_hw_queues)
+
+	if (ub->nr_queues_ready == ub->dev_info.nr_hw_queues) {
+		/* now we are ready for handling ublk io request */
+		ublk_reset_io_flags(ub);
 		complete_all(&ub->completion);
+	}
 }
 
 static inline int ublk_check_cmd_op(u32 cmd_op)
@@ -2866,42 +2935,15 @@ static int ublk_ctrl_set_params(struct u
 	return ret;
 }
 
-static void ublk_queue_reinit(struct ublk_device *ub, struct ublk_queue *ubq)
-{
-	int i;
-
-	WARN_ON_ONCE(!(ubq->ubq_daemon && ubq_daemon_is_dying(ubq)));
-
-	/* All old ioucmds have to be completed */
-	ubq->nr_io_ready = 0;
-	/* old daemon is PF_EXITING, put it now */
-	put_task_struct(ubq->ubq_daemon);
-	/* We have to reset it to NULL, otherwise ub won't accept new FETCH_REQ */
-	ubq->ubq_daemon = NULL;
-	ubq->timeout = false;
-
-	for (i = 0; i < ubq->q_depth; i++) {
-		struct ublk_io *io = &ubq->ios[i];
-
-		/* forget everything now and be ready for new FETCH_REQ */
-		io->flags = 0;
-		io->cmd = NULL;
-		io->addr = 0;
-	}
-}
-
 static int ublk_ctrl_start_recovery(struct ublk_device *ub,
 		struct io_uring_cmd *cmd)
 {
 	const struct ublksrv_ctrl_cmd *header = io_uring_sqe_cmd(cmd->sqe);
 	int ret = -EINVAL;
-	int i;
 
 	mutex_lock(&ub->mutex);
 	if (ublk_nosrv_should_stop_dev(ub))
 		goto out_unlock;
-	if (!ub->nr_queues_ready)
-		goto out_unlock;
 	/*
 	 * START_RECOVERY is only allowd after:
 	 *
@@ -2925,12 +2967,6 @@ static int ublk_ctrl_start_recovery(stru
 		goto out_unlock;
 	}
 	pr_devel("%s: start recovery for dev id %d.\n", __func__, header->dev_id);
-	for (i = 0; i < ub->dev_info.nr_hw_queues; i++)
-		ublk_queue_reinit(ub, ublk_get_queue(ub, i));
-	/* set to NULL, otherwise new ubq_daemon cannot mmap the io_cmd_buf */
-	ub->mm = NULL;
-	ub->nr_queues_ready = 0;
-	ub->nr_privileged_daemon = 0;
 	init_completion(&ub->completion);
 	ret = 0;
  out_unlock:
@@ -2944,7 +2980,6 @@ static int ublk_ctrl_end_recovery(struct
 	const struct ublksrv_ctrl_cmd *header = io_uring_sqe_cmd(cmd->sqe);
 	int ublksrv_pid = (int)header->data[0];
 	int ret = -EINVAL;
-	int i;
 
 	pr_devel("%s: Waiting for new ubq_daemons(nr: %d) are ready, dev id %d...\n",
 			__func__, ub->dev_info.nr_hw_queues, header->dev_id);
@@ -2964,22 +2999,10 @@ static int ublk_ctrl_end_recovery(struct
 		goto out_unlock;
 	}
 	ub->dev_info.ublksrv_pid = ublksrv_pid;
+	ub->dev_info.state = UBLK_S_DEV_LIVE;
 	pr_devel("%s: new ublksrv_pid %d, dev id %d\n",
 			__func__, ublksrv_pid, header->dev_id);
-
-	blk_mq_quiesce_queue(ub->ub_disk->queue);
-	ub->dev_info.state = UBLK_S_DEV_LIVE;
-	for (i = 0; i < ub->dev_info.nr_hw_queues; i++) {
-		struct ublk_queue *ubq = ublk_get_queue(ub, i);
-
-		ubq->canceling = false;
-		ubq->fail_io = false;
-	}
-	blk_mq_unquiesce_queue(ub->ub_disk->queue);
-	pr_devel("%s: queue unquiesced, dev id %d.\n",
-			__func__, header->dev_id);
 	blk_mq_kick_requeue_list(ub->ub_disk->queue);
-
 	ret = 0;
  out_unlock:
 	mutex_unlock(&ub->mutex);

[PATCH 6.14 157/183] ublk: improve detection and handling of ublk server exit

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Uday Shankar <ushankar@purestorage.com>

[ Upstream commit 82a8a30c581bbbe653d33c6ce2ef67e3072c7f12 ]

There are currently two ways in which ublk server exit is detected by
ublk_drv:

1. uring_cmd cancellation. If there are any outstanding uring_cmds which
   have not been completed to the ublk server when it exits, io_uring
   calls the uring_cmd callback with a special cancellation flag as the
   issuing task is exiting.
2. I/O timeout. This is needed in addition to the above to handle the
   "saturated queue" case, when all I/Os for a given queue are in the
   ublk server, and therefore there are no outstanding uring_cmds to
   cancel when the ublk server exits.

There are a couple of issues with this approach:

- It is complex and inelegant to have two methods to detect the same
  condition
- The second method detects ublk server exit only after a long delay
  (~30s, the default timeout assigned by the block layer). This delays
  the nosrv behavior from kicking in and potential subsequent recovery
  of the device.

The second issue is brought to light with the new test_generic_06 which
will be added in following patch. It fails before this fix:

selftests: ublk: test_generic_06.sh
dev id is 0
dd: error writing '/dev/ublkb0': Input/output error
1+0 records in
0+0 records out
0 bytes copied, 30.0611 s, 0.0 kB/s
DEAD
dd took 31 seconds to exit (>= 5s tolerance)!
generic_06 : [FAIL]

Fix this by instead detecting and handling ublk server exit in the
character file release callback. This has several advantages:

- This one place can handle both saturated and unsaturated queues. Thus,
  it replaces both preexisting methods of detecting ublk server exit.
- It runs quickly on ublk server exit - there is no 30s delay.
- It starts the process of removing task references in ublk_drv. This is
  needed if we want to relax restrictions in the driver like letting
  only one thread serve each queue

There is also the disadvantage that the character file release callback
can also be triggered by intentional close of the file, which is a
significant behavior change. Preexisting ublk servers (libublksrv) are
dependent on the ability to open/close the file multiple times. To
address this, only transition to a nosrv state if the file is released
while the ublk device is live. This allows for programs to open/close
the file multiple times during setup. It is still a behavior change if a
ublk server decides to close/reopen the file while the device is LIVE
(i.e. while it is responsible for serving I/O), but that would be highly
unusual. This behavior is in line with what is done by FUSE, which is
very similar to ublk in that a userspace daemon is providing services
traditionally provided by the kernel.

With this change in, the new test (and all other selftests, and all
ublksrv tests) pass:

selftests: ublk: test_generic_06.sh
dev id is 0
dd: error writing '/dev/ublkb0': Input/output error
1+0 records in
0+0 records out
0 bytes copied, 0.0376731 s, 0.0 kB/s
DEAD
generic_04 : [PASS]

Signed-off-by: Uday Shankar <ushankar@purestorage.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250416035444.99569-6-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/block/ublk_drv.c |  223 ++++++++++++++++++++++++++---------------------
 1 file changed, 124 insertions(+), 99 deletions(-)

--- a/drivers/block/ublk_drv.c
+++ b/drivers/block/ublk_drv.c
@@ -194,8 +194,6 @@ struct ublk_device {
 	struct completion	completion;
 	unsigned int		nr_queues_ready;
 	unsigned int		nr_privileged_daemon;
-
-	struct work_struct	nosrv_work;
 };
 
 /* header of ublk_params */
@@ -204,7 +202,10 @@ struct ublk_params_header {
 	__u32	types;
 };
 
-static bool ublk_abort_requests(struct ublk_device *ub, struct ublk_queue *ubq);
+
+static void ublk_stop_dev_unlocked(struct ublk_device *ub);
+static void ublk_abort_queue(struct ublk_device *ub, struct ublk_queue *ubq);
+static void __ublk_quiesce_dev(struct ublk_device *ub);
 
 static inline unsigned int ublk_req_build_flags(struct request *req);
 static inline struct ublksrv_io_desc *ublk_get_iod(struct ublk_queue *ubq,
@@ -1306,8 +1307,6 @@ static void ublk_queue_cmd_list(struct u
 static enum blk_eh_timer_return ublk_timeout(struct request *rq)
 {
 	struct ublk_queue *ubq = rq->mq_hctx->driver_data;
-	unsigned int nr_inflight = 0;
-	int i;
 
 	if (ubq->flags & UBLK_F_UNPRIVILEGED_DEV) {
 		if (!ubq->timeout) {
@@ -1318,26 +1317,6 @@ static enum blk_eh_timer_return ublk_tim
 		return BLK_EH_DONE;
 	}
 
-	if (!ubq_daemon_is_dying(ubq))
-		return BLK_EH_RESET_TIMER;
-
-	for (i = 0; i < ubq->q_depth; i++) {
-		struct ublk_io *io = &ubq->ios[i];
-
-		if (!(io->flags & UBLK_IO_FLAG_ACTIVE))
-			nr_inflight++;
-	}
-
-	/* cancelable uring_cmd can't help us if all commands are in-flight */
-	if (nr_inflight == ubq->q_depth) {
-		struct ublk_device *ub = ubq->dev;
-
-		if (ublk_abort_requests(ub, ubq)) {
-			schedule_work(&ub->nosrv_work);
-		}
-		return BLK_EH_DONE;
-	}
-
 	return BLK_EH_RESET_TIMER;
 }
 
@@ -1495,13 +1474,105 @@ static void ublk_reset_ch_dev(struct ubl
 	ub->nr_privileged_daemon = 0;
 }
 
+static struct gendisk *ublk_get_disk(struct ublk_device *ub)
+{
+	struct gendisk *disk;
+
+	spin_lock(&ub->lock);
+	disk = ub->ub_disk;
+	if (disk)
+		get_device(disk_to_dev(disk));
+	spin_unlock(&ub->lock);
+
+	return disk;
+}
+
+static void ublk_put_disk(struct gendisk *disk)
+{
+	if (disk)
+		put_device(disk_to_dev(disk));
+}
+
 static int ublk_ch_release(struct inode *inode, struct file *filp)
 {
 	struct ublk_device *ub = filp->private_data;
+	struct gendisk *disk;
+	int i;
+
+	/*
+	 * disk isn't attached yet, either device isn't live, or it has
+	 * been removed already, so we needn't to do anything
+	 */
+	disk = ublk_get_disk(ub);
+	if (!disk)
+		goto out;
+
+	/*
+	 * All uring_cmd are done now, so abort any request outstanding to
+	 * the ublk server
+	 *
+	 * This can be done in lockless way because ublk server has been
+	 * gone
+	 *
+	 * More importantly, we have to provide forward progress guarantee
+	 * without holding ub->mutex, otherwise control task grabbing
+	 * ub->mutex triggers deadlock
+	 *
+	 * All requests may be inflight, so ->canceling may not be set, set
+	 * it now.
+	 */
+	for (i = 0; i < ub->dev_info.nr_hw_queues; i++) {
+		struct ublk_queue *ubq = ublk_get_queue(ub, i);
+
+		ubq->canceling = true;
+		ublk_abort_queue(ub, ubq);
+	}
+	blk_mq_kick_requeue_list(disk->queue);
+
+	/*
+	 * All infligh requests have been completed or requeued and any new
+	 * request will be failed or requeued via `->canceling` now, so it is
+	 * fine to grab ub->mutex now.
+	 */
+	mutex_lock(&ub->mutex);
+
+	/* double check after grabbing lock */
+	if (!ub->ub_disk)
+		goto unlock;
+
+	/*
+	 * Transition the device to the nosrv state. What exactly this
+	 * means depends on the recovery flags
+	 */
+	blk_mq_quiesce_queue(disk->queue);
+	if (ublk_nosrv_should_stop_dev(ub)) {
+		/*
+		 * Allow any pending/future I/O to pass through quickly
+		 * with an error. This is needed because del_gendisk
+		 * waits for all pending I/O to complete
+		 */
+		for (i = 0; i < ub->dev_info.nr_hw_queues; i++)
+			ublk_get_queue(ub, i)->force_abort = true;
+		blk_mq_unquiesce_queue(disk->queue);
+
+		ublk_stop_dev_unlocked(ub);
+	} else {
+		if (ublk_nosrv_dev_should_queue_io(ub)) {
+			__ublk_quiesce_dev(ub);
+		} else {
+			ub->dev_info.state = UBLK_S_DEV_FAIL_IO;
+			for (i = 0; i < ub->dev_info.nr_hw_queues; i++)
+				ublk_get_queue(ub, i)->fail_io = true;
+		}
+		blk_mq_unquiesce_queue(disk->queue);
+	}
+unlock:
+	mutex_unlock(&ub->mutex);
+	ublk_put_disk(disk);
 
 	/* all uring_cmd has been done now, reset device & ubq */
 	ublk_reset_ch_dev(ub);
-
+out:
 	clear_bit(UB_STATE_OPEN, &ub->state);
 	return 0;
 }
@@ -1597,37 +1668,22 @@ static void ublk_abort_queue(struct ublk
 }
 
 /* Must be called when queue is frozen */
-static bool ublk_mark_queue_canceling(struct ublk_queue *ubq)
+static void ublk_mark_queue_canceling(struct ublk_queue *ubq)
 {
-	bool canceled;
-
 	spin_lock(&ubq->cancel_lock);
-	canceled = ubq->canceling;
-	if (!canceled)
+	if (!ubq->canceling)
 		ubq->canceling = true;
 	spin_unlock(&ubq->cancel_lock);
-
-	return canceled;
 }
 
-static bool ublk_abort_requests(struct ublk_device *ub, struct ublk_queue *ubq)
+static void ublk_start_cancel(struct ublk_queue *ubq)
 {
-	bool was_canceled = ubq->canceling;
-	struct gendisk *disk;
-
-	if (was_canceled)
-		return false;
-
-	spin_lock(&ub->lock);
-	disk = ub->ub_disk;
-	if (disk)
-		get_device(disk_to_dev(disk));
-	spin_unlock(&ub->lock);
+	struct ublk_device *ub = ubq->dev;
+	struct gendisk *disk = ublk_get_disk(ub);
 
 	/* Our disk has been dead */
 	if (!disk)
-		return false;
-
+		return;
 	/*
 	 * Now we are serialized with ublk_queue_rq()
 	 *
@@ -1636,15 +1692,9 @@ static bool ublk_abort_requests(struct u
 	 * touch completed uring_cmd
 	 */
 	blk_mq_quiesce_queue(disk->queue);
-	was_canceled = ublk_mark_queue_canceling(ubq);
-	if (!was_canceled) {
-		/* abort queue is for making forward progress */
-		ublk_abort_queue(ub, ubq);
-	}
+	ublk_mark_queue_canceling(ubq);
 	blk_mq_unquiesce_queue(disk->queue);
-	put_device(disk_to_dev(disk));
-
-	return !was_canceled;
+	ublk_put_disk(disk);
 }
 
 static void ublk_cancel_cmd(struct ublk_queue *ubq, struct ublk_io *io,
@@ -1668,6 +1718,17 @@ static void ublk_cancel_cmd(struct ublk_
 /*
  * The ublk char device won't be closed when calling cancel fn, so both
  * ublk device and queue are guaranteed to be live
+ *
+ * Two-stage cancel:
+ *
+ * - make every active uring_cmd done in ->cancel_fn()
+ *
+ * - aborting inflight ublk IO requests in ublk char device release handler,
+ *   which depends on 1st stage because device can only be closed iff all
+ *   uring_cmd are done
+ *
+ * Do _not_ try to acquire ub->mutex before all inflight requests are
+ * aborted, otherwise deadlock may be caused.
  */
 static void ublk_uring_cmd_cancel_fn(struct io_uring_cmd *cmd,
 		unsigned int issue_flags)
@@ -1675,8 +1736,6 @@ static void ublk_uring_cmd_cancel_fn(str
 	struct ublk_uring_cmd_pdu *pdu = ublk_get_uring_cmd_pdu(cmd);
 	struct ublk_queue *ubq = pdu->ubq;
 	struct task_struct *task;
-	struct ublk_device *ub;
-	bool need_schedule;
 	struct ublk_io *io;
 
 	if (WARN_ON_ONCE(!ubq))
@@ -1689,16 +1748,12 @@ static void ublk_uring_cmd_cancel_fn(str
 	if (WARN_ON_ONCE(task && task != ubq->ubq_daemon))
 		return;
 
-	ub = ubq->dev;
-	need_schedule = ublk_abort_requests(ub, ubq);
+	if (!ubq->canceling)
+		ublk_start_cancel(ubq);
 
 	io = &ubq->ios[pdu->tag];
 	WARN_ON_ONCE(io->cmd != cmd);
 	ublk_cancel_cmd(ubq, io, issue_flags);
-
-	if (need_schedule) {
-		schedule_work(&ub->nosrv_work);
-	}
 }
 
 static inline bool ublk_queue_ready(struct ublk_queue *ubq)
@@ -1757,13 +1812,11 @@ static void __ublk_quiesce_dev(struct ub
 			__func__, ub->dev_info.dev_id,
 			ub->dev_info.state == UBLK_S_DEV_LIVE ?
 			"LIVE" : "QUIESCED");
-	blk_mq_quiesce_queue(ub->ub_disk->queue);
 	/* mark every queue as canceling */
 	for (i = 0; i < ub->dev_info.nr_hw_queues; i++)
 		ublk_get_queue(ub, i)->canceling = true;
 	ublk_wait_tagset_rqs_idle(ub);
 	ub->dev_info.state = UBLK_S_DEV_QUIESCED;
-	blk_mq_unquiesce_queue(ub->ub_disk->queue);
 }
 
 static void ublk_force_abort_dev(struct ublk_device *ub)
@@ -1800,50 +1853,25 @@ static struct gendisk *ublk_detach_disk(
 	return disk;
 }
 
-static void ublk_stop_dev(struct ublk_device *ub)
+static void ublk_stop_dev_unlocked(struct ublk_device *ub)
+	__must_hold(&ub->mutex)
 {
 	struct gendisk *disk;
 
-	mutex_lock(&ub->mutex);
 	if (ub->dev_info.state == UBLK_S_DEV_DEAD)
-		goto unlock;
+		return;
+
 	if (ublk_nosrv_dev_should_queue_io(ub))
 		ublk_force_abort_dev(ub);
 	del_gendisk(ub->ub_disk);
 	disk = ublk_detach_disk(ub);
 	put_disk(disk);
- unlock:
-	mutex_unlock(&ub->mutex);
-	ublk_cancel_dev(ub);
 }
 
-static void ublk_nosrv_work(struct work_struct *work)
+static void ublk_stop_dev(struct ublk_device *ub)
 {
-	struct ublk_device *ub =
-		container_of(work, struct ublk_device, nosrv_work);
-	int i;
-
-	if (ublk_nosrv_should_stop_dev(ub)) {
-		ublk_stop_dev(ub);
-		return;
-	}
-
 	mutex_lock(&ub->mutex);
-	if (ub->dev_info.state != UBLK_S_DEV_LIVE)
-		goto unlock;
-
-	if (ublk_nosrv_dev_should_queue_io(ub)) {
-		__ublk_quiesce_dev(ub);
-	} else {
-		blk_mq_quiesce_queue(ub->ub_disk->queue);
-		ub->dev_info.state = UBLK_S_DEV_FAIL_IO;
-		for (i = 0; i < ub->dev_info.nr_hw_queues; i++) {
-			ublk_get_queue(ub, i)->fail_io = true;
-		}
-		blk_mq_unquiesce_queue(ub->ub_disk->queue);
-	}
-
- unlock:
+	ublk_stop_dev_unlocked(ub);
 	mutex_unlock(&ub->mutex);
 	ublk_cancel_dev(ub);
 }
@@ -2419,7 +2447,6 @@ static int ublk_add_tag_set(struct ublk_
 static void ublk_remove(struct ublk_device *ub)
 {
 	ublk_stop_dev(ub);
-	cancel_work_sync(&ub->nosrv_work);
 	cdev_device_del(&ub->cdev, &ub->cdev_dev);
 	ublk_put_device(ub);
 	ublks_added--;
@@ -2693,7 +2720,6 @@ static int ublk_ctrl_add_dev(struct io_u
 		goto out_unlock;
 	mutex_init(&ub->mutex);
 	spin_lock_init(&ub->lock);
-	INIT_WORK(&ub->nosrv_work, ublk_nosrv_work);
 
 	ret = ublk_alloc_dev_number(ub, header->dev_id);
 	if (ret < 0)
@@ -2828,7 +2854,6 @@ static inline void ublk_ctrl_cmd_dump(st
 static int ublk_ctrl_stop_dev(struct ublk_device *ub)
 {
 	ublk_stop_dev(ub);
-	cancel_work_sync(&ub->nosrv_work);
 	return 0;
 }
 

[PATCH 6.14 158/183] ublk: remove __ublk_quiesce_dev()

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ming Lei <ming.lei@redhat.com>

[ Upstream commit 736b005b413a172670711ee17cab3c8ccab83223 ]

Remove __ublk_quiesce_dev() and open code for updating device state as
QUIESCED.

We needn't to drain inflight requests in __ublk_quiesce_dev() any more,
because all inflight requests are aborted in ublk char device release
handler.

Also we needn't to set ->canceling in __ublk_quiesce_dev() any more
because it is done unconditionally now in ublk_ch_release().

Reviewed-by: Uday Shankar <ushankar@purestorage.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250416035444.99569-7-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/block/ublk_drv.c |   19 ++-----------------
 1 file changed, 2 insertions(+), 17 deletions(-)

--- a/drivers/block/ublk_drv.c
+++ b/drivers/block/ublk_drv.c
@@ -205,7 +205,6 @@ struct ublk_params_header {
 
 static void ublk_stop_dev_unlocked(struct ublk_device *ub);
 static void ublk_abort_queue(struct ublk_device *ub, struct ublk_queue *ubq);
-static void __ublk_quiesce_dev(struct ublk_device *ub);
 
 static inline unsigned int ublk_req_build_flags(struct request *req);
 static inline struct ublksrv_io_desc *ublk_get_iod(struct ublk_queue *ubq,
@@ -1558,7 +1557,8 @@ static int ublk_ch_release(struct inode
 		ublk_stop_dev_unlocked(ub);
 	} else {
 		if (ublk_nosrv_dev_should_queue_io(ub)) {
-			__ublk_quiesce_dev(ub);
+			/* ->canceling is set and all requests are aborted */
+			ub->dev_info.state = UBLK_S_DEV_QUIESCED;
 		} else {
 			ub->dev_info.state = UBLK_S_DEV_FAIL_IO;
 			for (i = 0; i < ub->dev_info.nr_hw_queues; i++)
@@ -1804,21 +1804,6 @@ static void ublk_wait_tagset_rqs_idle(st
 	}
 }
 
-static void __ublk_quiesce_dev(struct ublk_device *ub)
-{
-	int i;
-
-	pr_devel("%s: quiesce ub: dev_id %d state %s\n",
-			__func__, ub->dev_info.dev_id,
-			ub->dev_info.state == UBLK_S_DEV_LIVE ?
-			"LIVE" : "QUIESCED");
-	/* mark every queue as canceling */
-	for (i = 0; i < ub->dev_info.nr_hw_queues; i++)
-		ublk_get_queue(ub, i)->canceling = true;
-	ublk_wait_tagset_rqs_idle(ub);
-	ub->dev_info.state = UBLK_S_DEV_QUIESCED;
-}
-
 static void ublk_force_abort_dev(struct ublk_device *ub)
 {
 	int i;

[PATCH 6.14 159/183] ublk: simplify aborting ublk request

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ming Lei <ming.lei@redhat.com>

[ Upstream commit e63d2228ef831af36f963b3ab8604160cfff84c1 ]

Now ublk_abort_queue() is moved to ublk char device release handler,
meantime our request queue is "quiesced" because either ->canceling was
set from uring_cmd cancel function or all IOs are inflight and can't be
completed by ublk server, things becomes easy much:

- all uring_cmd are done, so we needn't to mark io as UBLK_IO_FLAG_ABORTED
for handling completion from uring_cmd

- ublk char device is closed, no one can hold IO request reference any more,
so we can simply complete this request or requeue it for ublk_nosrv_should_reissue_outstanding.

Reviewed-by: Uday Shankar <ushankar@purestorage.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250416035444.99569-8-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/block/ublk_drv.c |   82 +++++++++++------------------------------------
 1 file changed, 20 insertions(+), 62 deletions(-)

--- a/drivers/block/ublk_drv.c
+++ b/drivers/block/ublk_drv.c
@@ -116,15 +116,6 @@ struct ublk_uring_cmd_pdu {
 #define UBLK_IO_FLAG_OWNED_BY_SRV 0x02
 
 /*
- * IO command is aborted, so this flag is set in case of
- * !UBLK_IO_FLAG_ACTIVE.
- *
- * After this flag is observed, any pending or new incoming request
- * associated with this io command will be failed immediately
- */
-#define UBLK_IO_FLAG_ABORTED 0x04
-
-/*
  * UBLK_IO_FLAG_NEED_GET_DATA is set because IO command requires
  * get data buffer address from ublksrv.
  *
@@ -1054,12 +1045,6 @@ static inline void __ublk_complete_rq(st
 	unsigned int unmapped_bytes;
 	blk_status_t res = BLK_STS_OK;
 
-	/* called from ublk_abort_queue() code path */
-	if (io->flags & UBLK_IO_FLAG_ABORTED) {
-		res = BLK_STS_IOERR;
-		goto exit;
-	}
-
 	/* failed read IO if nothing is read */
 	if (!io->res && req_op(req) == REQ_OP_READ)
 		io->res = -EIO;
@@ -1109,47 +1094,6 @@ static void ublk_complete_rq(struct kref
 	__ublk_complete_rq(req);
 }
 
-static void ublk_do_fail_rq(struct request *req)
-{
-	struct ublk_queue *ubq = req->mq_hctx->driver_data;
-
-	if (ublk_nosrv_should_reissue_outstanding(ubq->dev))
-		blk_mq_requeue_request(req, false);
-	else
-		__ublk_complete_rq(req);
-}
-
-static void ublk_fail_rq_fn(struct kref *ref)
-{
-	struct ublk_rq_data *data = container_of(ref, struct ublk_rq_data,
-			ref);
-	struct request *req = blk_mq_rq_from_pdu(data);
-
-	ublk_do_fail_rq(req);
-}
-
-/*
- * Since ublk_rq_task_work_cb always fails requests immediately during
- * exiting, __ublk_fail_req() is only called from abort context during
- * exiting. So lock is unnecessary.
- *
- * Also aborting may not be started yet, keep in mind that one failed
- * request may be issued by block layer again.
- */
-static void __ublk_fail_req(struct ublk_queue *ubq, struct ublk_io *io,
-		struct request *req)
-{
-	WARN_ON_ONCE(io->flags & UBLK_IO_FLAG_ACTIVE);
-
-	if (ublk_need_req_ref(ubq)) {
-		struct ublk_rq_data *data = blk_mq_rq_to_pdu(req);
-
-		kref_put(&data->ref, ublk_fail_rq_fn);
-	} else {
-		ublk_do_fail_rq(req);
-	}
-}
-
 static void ubq_complete_io_cmd(struct ublk_io *io, int res,
 				unsigned issue_flags)
 {
@@ -1639,10 +1583,26 @@ static void ublk_commit_completion(struc
 		ublk_put_req_ref(ubq, req);
 }
 
+static void __ublk_fail_req(struct ublk_queue *ubq, struct ublk_io *io,
+		struct request *req)
+{
+	WARN_ON_ONCE(io->flags & UBLK_IO_FLAG_ACTIVE);
+
+	if (ublk_nosrv_should_reissue_outstanding(ubq->dev))
+		blk_mq_requeue_request(req, false);
+	else {
+		io->res = -EIO;
+		__ublk_complete_rq(req);
+	}
+}
+
 /*
- * Called from ubq_daemon context via cancel fn, meantime quiesce ublk
- * blk-mq queue, so we are called exclusively with blk-mq and ubq_daemon
- * context, so everything is serialized.
+ * Called from ublk char device release handler, when any uring_cmd is
+ * done, meantime request queue is "quiesced" since all inflight requests
+ * can't be completed because ublk server is dead.
+ *
+ * So no one can hold our request IO reference any more, simply ignore the
+ * reference, and complete the request immediately
  */
 static void ublk_abort_queue(struct ublk_device *ub, struct ublk_queue *ubq)
 {
@@ -1659,10 +1619,8 @@ static void ublk_abort_queue(struct ublk
 			 * will do it
 			 */
 			rq = blk_mq_tag_to_rq(ub->tag_set.tags[ubq->q_id], i);
-			if (rq && blk_mq_request_started(rq)) {
-				io->flags |= UBLK_IO_FLAG_ABORTED;
+			if (rq && blk_mq_request_started(rq))
 				__ublk_fail_req(ubq, io, rq);
-			}
 		}
 	}
 }

[PATCH 6.14 160/183] ublk: fix race between io_uring_cmd_complete_in_task and ublk_cancel_cmd

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ming Lei <ming.lei@redhat.com>

[ Upstream commit f40139fde5278d81af3227444fd6e76a76b9506d ]

ublk_cancel_cmd() calls io_uring_cmd_done() to complete uring_cmd, but
we may have scheduled task work via io_uring_cmd_complete_in_task() for
dispatching request, then kernel crash can be triggered.

Fix it by not trying to canceling the command if ublk block request is
started.

Fixes: 216c8f5ef0f2 ("ublk: replace monitor with cancelable uring_cmd")
Reported-by: Jared Holzman <jholzman@nvidia.com>
Tested-by: Jared Holzman <jholzman@nvidia.com>
Closes: https://lore.kernel.org/linux-block/d2179120-171b-47ba-b664-23242981ef19@nvidia.com/
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250425013742.1079549-3-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/block/ublk_drv.c |   27 +++++++++++++++++++++------
 1 file changed, 21 insertions(+), 6 deletions(-)

--- a/drivers/block/ublk_drv.c
+++ b/drivers/block/ublk_drv.c
@@ -1655,14 +1655,31 @@ static void ublk_start_cancel(struct ubl
 	ublk_put_disk(disk);
 }
 
-static void ublk_cancel_cmd(struct ublk_queue *ubq, struct ublk_io *io,
+static void ublk_cancel_cmd(struct ublk_queue *ubq, unsigned tag,
 		unsigned int issue_flags)
 {
+	struct ublk_io *io = &ubq->ios[tag];
+	struct ublk_device *ub = ubq->dev;
+	struct request *req;
 	bool done;
 
 	if (!(io->flags & UBLK_IO_FLAG_ACTIVE))
 		return;
 
+	/*
+	 * Don't try to cancel this command if the request is started for
+	 * avoiding race between io_uring_cmd_done() and
+	 * io_uring_cmd_complete_in_task().
+	 *
+	 * Either the started request will be aborted via __ublk_abort_rq(),
+	 * then this uring_cmd is canceled next time, or it will be done in
+	 * task work function ublk_dispatch_req() because io_uring guarantees
+	 * that ublk_dispatch_req() is always called
+	 */
+	req = blk_mq_tag_to_rq(ub->tag_set.tags[ubq->q_id], tag);
+	if (req && blk_mq_request_started(req))
+		return;
+
 	spin_lock(&ubq->cancel_lock);
 	done = !!(io->flags & UBLK_IO_FLAG_CANCELED);
 	if (!done)
@@ -1694,7 +1711,6 @@ static void ublk_uring_cmd_cancel_fn(str
 	struct ublk_uring_cmd_pdu *pdu = ublk_get_uring_cmd_pdu(cmd);
 	struct ublk_queue *ubq = pdu->ubq;
 	struct task_struct *task;
-	struct ublk_io *io;
 
 	if (WARN_ON_ONCE(!ubq))
 		return;
@@ -1709,9 +1725,8 @@ static void ublk_uring_cmd_cancel_fn(str
 	if (!ubq->canceling)
 		ublk_start_cancel(ubq);
 
-	io = &ubq->ios[pdu->tag];
-	WARN_ON_ONCE(io->cmd != cmd);
-	ublk_cancel_cmd(ubq, io, issue_flags);
+	WARN_ON_ONCE(ubq->ios[pdu->tag].cmd != cmd);
+	ublk_cancel_cmd(ubq, pdu->tag, issue_flags);
 }
 
 static inline bool ublk_queue_ready(struct ublk_queue *ubq)
@@ -1724,7 +1739,7 @@ static void ublk_cancel_queue(struct ubl
 	int i;
 
 	for (i = 0; i < ubq->q_depth; i++)
-		ublk_cancel_cmd(ubq, &ubq->ios[i], IO_URING_F_UNLOCKED);
+		ublk_cancel_cmd(ubq, i, IO_URING_F_UNLOCKED);
 }
 
 /* Cancel all pending commands, must be called after del_gendisk() returns */

[PATCH 6.14 161/183] sch_htb: make htb_qlen_notify() idempotent

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Cong Wang <xiyou.wangcong@gmail.com>

commit 5ba8b837b522d7051ef81bacf3d95383ff8edce5 upstream.

htb_qlen_notify() always deactivates the HTB class and in fact could
trigger a warning if it is already deactivated. Therefore, it is not
idempotent and not friendly to its callers, like fq_codel_dequeue().

Let's make it idempotent to ease qdisc_tree_reduce_backlog() callers'
life.

Reported-by: Gerrard Tai <gerrard.tai@starlabs.sg>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250403211033.166059-2-xiyou.wangcong@gmail.com
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/sched/sch_htb.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/net/sched/sch_htb.c
+++ b/net/sched/sch_htb.c
@@ -1485,6 +1485,8 @@ static void htb_qlen_notify(struct Qdisc
 {
 	struct htb_class *cl = (struct htb_class *)arg;
 
+	if (!cl->prio_activity)
+		return;
 	htb_deactivate(qdisc_priv(sch), cl);
 }
 

[PATCH 6.14 162/183] sch_drr: make drr_qlen_notify() idempotent

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Cong Wang <xiyou.wangcong@gmail.com>

commit df008598b3a00be02a8051fde89ca0fbc416bd55 upstream.

drr_qlen_notify() always deletes the DRR class from its active list
with list_del(), therefore, it is not idempotent and not friendly
to its callers, like fq_codel_dequeue().

Let's make it idempotent to ease qdisc_tree_reduce_backlog() callers'
life. Also change other list_del()'s to list_del_init() just to be
extra safe.

Reported-by: Gerrard Tai <gerrard.tai@starlabs.sg>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250403211033.166059-3-xiyou.wangcong@gmail.com
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/sched/sch_drr.c |    7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

--- a/net/sched/sch_drr.c
+++ b/net/sched/sch_drr.c
@@ -110,6 +110,7 @@ static int drr_change_class(struct Qdisc
 		return -ENOBUFS;
 
 	gnet_stats_basic_sync_init(&cl->bstats);
+	INIT_LIST_HEAD(&cl->alist);
 	cl->common.classid = classid;
 	cl->quantum	   = quantum;
 	cl->qdisc	   = qdisc_create_dflt(sch->dev_queue,
@@ -234,7 +235,7 @@ static void drr_qlen_notify(struct Qdisc
 {
 	struct drr_class *cl = (struct drr_class *)arg;
 
-	list_del(&cl->alist);
+	list_del_init(&cl->alist);
 }
 
 static int drr_dump_class(struct Qdisc *sch, unsigned long arg,
@@ -393,7 +394,7 @@ static struct sk_buff *drr_dequeue(struc
 			if (unlikely(skb == NULL))
 				goto out;
 			if (cl->qdisc->q.qlen == 0)
-				list_del(&cl->alist);
+				list_del_init(&cl->alist);
 
 			bstats_update(&cl->bstats, skb);
 			qdisc_bstats_update(sch, skb);
@@ -434,7 +435,7 @@ static void drr_reset_qdisc(struct Qdisc
 	for (i = 0; i < q->clhash.hashsize; i++) {
 		hlist_for_each_entry(cl, &q->clhash.hash[i], common.hnode) {
 			if (cl->qdisc->q.qlen)
-				list_del(&cl->alist);
+				list_del_init(&cl->alist);
 			qdisc_reset(cl->qdisc);
 		}
 	}

[PATCH 6.14 163/183] sch_hfsc: make hfsc_qlen_notify() idempotent

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Cong Wang <xiyou.wangcong@gmail.com>

commit 51eb3b65544c9efd6a1026889ee5fb5aa62da3bb upstream.

hfsc_qlen_notify() is not idempotent either and not friendly
to its callers, like fq_codel_dequeue(). Let's make it idempotent
to ease qdisc_tree_reduce_backlog() callers' life:

1. update_vf() decreases cl->cl_nactive, so we can check whether it is
non-zero before calling it.

2. eltree_remove() always removes RB node cl->el_node, but we can use
   RB_EMPTY_NODE() + RB_CLEAR_NODE() to make it safe.

Reported-by: Gerrard Tai <gerrard.tai@starlabs.sg>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250403211033.166059-4-xiyou.wangcong@gmail.com
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/sched/sch_hfsc.c |    8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

--- a/net/sched/sch_hfsc.c
+++ b/net/sched/sch_hfsc.c
@@ -203,7 +203,10 @@ eltree_insert(struct hfsc_class *cl)
 static inline void
 eltree_remove(struct hfsc_class *cl)
 {
-	rb_erase(&cl->el_node, &cl->sched->eligible);
+	if (!RB_EMPTY_NODE(&cl->el_node)) {
+		rb_erase(&cl->el_node, &cl->sched->eligible);
+		RB_CLEAR_NODE(&cl->el_node);
+	}
 }
 
 static inline void
@@ -1225,7 +1228,8 @@ hfsc_qlen_notify(struct Qdisc *sch, unsi
 	/* vttree is now handled in update_vf() so that update_vf(cl, 0, 0)
 	 * needs to be called explicitly to remove a class from vttree.
 	 */
-	update_vf(cl, 0, 0);
+	if (cl->cl_nactive)
+		update_vf(cl, 0, 0);
 	if (cl->cl_flags & HFSC_RSC)
 		eltree_remove(cl);
 }

[PATCH 6.14 164/183] sch_qfq: make qfq_qlen_notify() idempotent

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Cong Wang <xiyou.wangcong@gmail.com>

commit 55f9eca4bfe30a15d8656f915922e8c98b7f0728 upstream.

qfq_qlen_notify() always deletes its class from its active list
with list_del_init() _and_ calls qfq_deactivate_agg() when the whole list
becomes empty.

To make it idempotent, just skip everything when it is not in the active
list.

Also change other list_del()'s to list_del_init() just to be extra safe.

Reported-by: Gerrard Tai <gerrard.tai@starlabs.sg>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250403211033.166059-5-xiyou.wangcong@gmail.com
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/sched/sch_qfq.c |    7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

--- a/net/sched/sch_qfq.c
+++ b/net/sched/sch_qfq.c
@@ -352,7 +352,7 @@ static void qfq_deactivate_class(struct
 	struct qfq_aggregate *agg = cl->agg;
 
 
-	list_del(&cl->alist); /* remove from RR queue of the aggregate */
+	list_del_init(&cl->alist); /* remove from RR queue of the aggregate */
 	if (list_empty(&agg->active)) /* agg is now inactive */
 		qfq_deactivate_agg(q, agg);
 }
@@ -479,6 +479,7 @@ static int qfq_change_class(struct Qdisc
 	gnet_stats_basic_sync_init(&cl->bstats);
 	cl->common.classid = classid;
 	cl->deficit = lmax;
+	INIT_LIST_HEAD(&cl->alist);
 
 	cl->qdisc = qdisc_create_dflt(sch->dev_queue, &pfifo_qdisc_ops,
 				      classid, NULL);
@@ -987,7 +988,7 @@ static struct sk_buff *agg_dequeue(struc
 	cl->deficit -= (int) len;
 
 	if (cl->qdisc->q.qlen == 0) /* no more packets, remove from list */
-		list_del(&cl->alist);
+		list_del_init(&cl->alist);
 	else if (cl->deficit < qdisc_pkt_len(cl->qdisc->ops->peek(cl->qdisc))) {
 		cl->deficit += agg->lmax;
 		list_move_tail(&cl->alist, &agg->active);
@@ -1418,6 +1419,8 @@ static void qfq_qlen_notify(struct Qdisc
 	struct qfq_sched *q = qdisc_priv(sch);
 	struct qfq_class *cl = (struct qfq_class *)arg;
 
+	if (list_empty(&cl->alist))
+		return;
 	qfq_deactivate_class(q, cl);
 }
 

[PATCH 6.14 165/183] sch_ets: make est_qlen_notify() idempotent

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Cong Wang <xiyou.wangcong@gmail.com>

commit a7a15f39c682ac4268624da2abdb9114bdde96d5 upstream.

est_qlen_notify() deletes its class from its active list with
list_del() when qlen is 0, therefore, it is not idempotent and
not friendly to its callers, like fq_codel_dequeue().

Let's make it idempotent to ease qdisc_tree_reduce_backlog() callers'
life. Also change other list_del()'s to list_del_init() just to be
extra safe.

Reported-by: Gerrard Tai <gerrard.tai@starlabs.sg>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Link: https://patch.msgid.link/20250403211033.166059-6-xiyou.wangcong@gmail.com
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/sched/sch_ets.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

--- a/net/sched/sch_ets.c
+++ b/net/sched/sch_ets.c
@@ -298,7 +298,7 @@ static void ets_class_qlen_notify(struct
 	 * to remove them.
 	 */
 	if (!ets_class_is_strict(q, cl) && sch->q.qlen)
-		list_del(&cl->alist);
+		list_del_init(&cl->alist);
 }
 
 static int ets_class_dump(struct Qdisc *sch, unsigned long arg,
@@ -491,7 +491,7 @@ static struct sk_buff *ets_qdisc_dequeue
 			if (unlikely(!skb))
 				goto out;
 			if (cl->qdisc->q.qlen == 0)
-				list_del(&cl->alist);
+				list_del_init(&cl->alist);
 			return ets_qdisc_dequeue_skb(sch, skb);
 		}
 
@@ -660,7 +660,7 @@ static int ets_qdisc_change(struct Qdisc
 	}
 	for (i = q->nbands; i < oldbands; i++) {
 		if (i >= q->nstrict && q->classes[i].qdisc->q.qlen)
-			list_del(&q->classes[i].alist);
+			list_del_init(&q->classes[i].alist);
 		qdisc_tree_flush_backlog(q->classes[i].qdisc);
 	}
 	WRITE_ONCE(q->nstrict, nstrict);
@@ -716,7 +716,7 @@ static void ets_qdisc_reset(struct Qdisc
 
 	for (band = q->nstrict; band < q->nbands; band++) {
 		if (q->classes[band].qdisc->q.qlen)
-			list_del(&q->classes[band].alist);
+			list_del_init(&q->classes[band].alist);
 	}
 	for (band = 0; band < q->nbands; band++)
 		qdisc_reset(q->classes[band].qdisc);

[PATCH 6.14 166/183] firmware: arm_scmi: Balance device refcount when destroying devices

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Cristian Marussi <cristian.marussi@arm.com>

[ Upstream commit 9ca67840c0ddf3f39407339624cef824a4f27599 ]

Using device_find_child() to lookup the proper SCMI device to destroy
causes an unbalance in device refcount, since device_find_child() calls an
implicit get_device(): this, in turns, inhibits the call of the provided
release methods upon devices destruction.

As a consequence, one of the structures that is not freed properly upon
destruction is the internal struct device_private dev->p populated by the
drivers subsystem core.

KMemleak detects this situation since loading/unloding some SCMI driver
causes related devices to be created/destroyed without calling any
device_release method.

unreferenced object 0xffff00000f583800 (size 512):
  comm "insmod", pid 227, jiffies 4294912190
  hex dump (first 32 bytes):
    00 00 00 00 ad 4e ad de ff ff ff ff 00 00 00 00  .....N..........
    ff ff ff ff ff ff ff ff 60 36 1d 8a 00 80 ff ff  ........`6......
  backtrace (crc 114e2eed):
    kmemleak_alloc+0xbc/0xd8
    __kmalloc_cache_noprof+0x2dc/0x398
    device_add+0x954/0x12d0
    device_register+0x28/0x40
    __scmi_device_create.part.0+0x1bc/0x380
    scmi_device_create+0x2d0/0x390
    scmi_create_protocol_devices+0x74/0xf8
    scmi_device_request_notifier+0x1f8/0x2a8
    notifier_call_chain+0x110/0x3b0
    blocking_notifier_call_chain+0x70/0xb0
    scmi_driver_register+0x350/0x7f0
    0xffff80000a3b3038
    do_one_initcall+0x12c/0x730
    do_init_module+0x1dc/0x640
    load_module+0x4b20/0x5b70
    init_module_from_file+0xec/0x158

$ ./scripts/faddr2line ./vmlinux device_add+0x954/0x12d0
device_add+0x954/0x12d0:
kmalloc_noprof at include/linux/slab.h:901
(inlined by) kzalloc_noprof at include/linux/slab.h:1037
(inlined by) device_private_init at drivers/base/core.c:3510
(inlined by) device_add at drivers/base/core.c:3561

Balance device refcount by issuing a put_device() on devices found via
device_find_child().

Reported-by: Alice Ryhl <aliceryhl@google.com>
Closes: https://lore.kernel.org/linux-arm-kernel/Z8nK3uFkspy61yjP@arm.com/T/#mc1f73a0ea5e41014fa145147b7b839fc988ada8f
CC: Sudeep Holla <sudeep.holla@arm.com>
CC: Catalin Marinas <catalin.marinas@arm.com>
Fixes: d4f9dddd21f3 ("firmware: arm_scmi: Add dynamic scmi devices creation")
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Tested-by: Alice Ryhl <aliceryhl@google.com>
Message-Id: <20250306185447.2039336-1-cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/firmware/arm_scmi/bus.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/firmware/arm_scmi/bus.c b/drivers/firmware/arm_scmi/bus.c
index a3386bf36de50..7d7af2262c013 100644
--- a/drivers/firmware/arm_scmi/bus.c
+++ b/drivers/firmware/arm_scmi/bus.c
@@ -260,6 +260,9 @@ static struct scmi_device *scmi_child_dev_find(struct device *parent,
 	if (!dev)
 		return NULL;
 
+	/* Drop the refcnt bumped implicitly by device_find_child */
+	put_device(dev);
+
 	return to_scmi_dev(dev);
 }
 
-- 
2.39.5

[PATCH 6.14 167/183] firmware: arm_ffa: Skip Rx buffer ownership release if not acquired

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sudeep Holla <sudeep.holla@arm.com>

[ Upstream commit 4567bdaaaaa1744da3d7da07d9aca2f941f5b4e5 ]

Completion of the FFA_PARTITION_INFO_GET ABI transfers the ownership of
the caller’s Rx buffer from the producer(typically partition mnager) to
the consumer(this driver/OS). FFA_RX_RELEASE transfers the ownership
from the consumer back to the producer.

However, when we set the flag to just return the count of partitions
deployed in the system corresponding to the specified UUID while
invoking FFA_PARTITION_INFO_GET, the Rx buffer ownership shouldn't be
transferred to this driver. We must be able to skip transferring back
the ownership to the partition manager when we request just to get the
count of the partitions as the buffers are not acquired in this case.

Firmware may return FFA_RET_DENIED or other error for the ffa_rx_release()
in such cases.

Fixes: bb1be7498500 ("firmware: arm_ffa: Add v1.1 get_partition_info support")
Message-Id: <20250321115700.3525197-1-sudeep.holla@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/firmware/arm_ffa/driver.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/firmware/arm_ffa/driver.c b/drivers/firmware/arm_ffa/driver.c
index 655672a880959..03d22cbb2ad47 100644
--- a/drivers/firmware/arm_ffa/driver.c
+++ b/drivers/firmware/arm_ffa/driver.c
@@ -280,7 +280,8 @@ __ffa_partition_info_get(u32 uuid0, u32 uuid1, u32 uuid2, u32 uuid3,
 			memcpy(buffer + idx, drv_info->rx_buffer + idx * sz,
 			       buf_sz);
 
-	ffa_rx_release();
+	if (!(flags & PARTITION_INFO_GET_RETURN_COUNT_ONLY))
+		ffa_rx_release();
 
 	mutex_unlock(&drv_info->rx_lock);
 
-- 
2.39.5

[PATCH 6.14 168/183] arm64: dts: imx95: Correct the range of PCIe app-reg region

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Richard Zhu <hongxing.zhu@nxp.com>

[ Upstream commit 02e4232998db357bb8199778722d81ffcff0cb98 ]

Correct the range of PCIe app-reg region from 0x2000 to 0x4000 refer to
SerDes_SS memory map of i.MX95 Rerference Manual.

Fixes: 3b1d5deb29ff ("arm64: dts: imx95: add pcie[0,1] and pcie-ep[0,1] support")
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/freescale/imx95.dtsi | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx95.dtsi b/arch/arm64/boot/dts/freescale/imx95.dtsi
index 6b8470cb3461a..0e6a9e639d769 100644
--- a/arch/arm64/boot/dts/freescale/imx95.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx95.dtsi
@@ -1542,7 +1542,7 @@
 			reg = <0 0x4c300000 0 0x10000>,
 			      <0 0x60100000 0 0xfe00000>,
 			      <0 0x4c360000 0 0x10000>,
-			      <0 0x4c340000 0 0x2000>;
+			      <0 0x4c340000 0 0x4000>;
 			reg-names = "dbi", "config", "atu", "app";
 			ranges = <0x81000000 0x0 0x00000000 0x0 0x6ff00000 0 0x00100000>,
 				 <0x82000000 0x0 0x10000000 0x9 0x10000000 0 0x10000000>;
@@ -1582,7 +1582,7 @@
 			reg = <0 0x4c300000 0 0x10000>,
 			      <0 0x4c360000 0 0x1000>,
 			      <0 0x4c320000 0 0x1000>,
-			      <0 0x4c340000 0 0x2000>,
+			      <0 0x4c340000 0 0x4000>,
 			      <0 0x4c370000 0 0x10000>,
 			      <0x9 0 1 0>;
 			reg-names = "dbi","atu", "dbi2", "app", "dma", "addr_space";
@@ -1609,7 +1609,7 @@
 			reg = <0 0x4c380000 0 0x10000>,
 			      <8 0x80100000 0 0xfe00000>,
 			      <0 0x4c3e0000 0 0x10000>,
-			      <0 0x4c3c0000 0 0x2000>;
+			      <0 0x4c3c0000 0 0x4000>;
 			reg-names = "dbi", "config", "atu", "app";
 			ranges = <0x81000000 0 0x00000000 0x8 0x8ff00000 0 0x00100000>,
 				 <0x82000000 0 0x10000000 0xa 0x10000000 0 0x10000000>;
@@ -1649,7 +1649,7 @@
 			reg = <0 0x4c380000 0 0x10000>,
 			      <0 0x4c3e0000 0 0x1000>,
 			      <0 0x4c3a0000 0 0x1000>,
-			      <0 0x4c3c0000 0 0x2000>,
+			      <0 0x4c3c0000 0 0x4000>,
 			      <0 0x4c3f0000 0 0x10000>,
 			      <0xa 0 1 0>;
 			reg-names = "dbi", "atu", "dbi2", "app", "dma", "addr_space";
-- 
2.39.5

[PATCH 6.14 169/183] ARM: dts: opos6ul: add ksz8081 phy properties

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sébastien Szymanski <sebastien.szymanski@armadeus.com>

[ Upstream commit 6e1a7bc8382b0d4208258f7d2a4474fae788dd90 ]

Commit c7e73b5051d6 ("ARM: imx: mach-imx6ul: remove 14x14 EVK specific
PHY fixup") removed a PHY fixup that setted the clock mode and the LED
mode.
Make the Ethernet interface work again by doing as advised in the
commit's log, set clock mode and the LED mode in the device tree.

Fixes: c7e73b5051d6 ("ARM: imx: mach-imx6ul: remove 14x14 EVK specific PHY fixup")
Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/nxp/imx/imx6ul-imx6ull-opos6ul.dtsi | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-imx6ull-opos6ul.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-imx6ull-opos6ul.dtsi
index f2386dcb9ff2c..dda4fa91b2f2c 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6ul-imx6ull-opos6ul.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-imx6ull-opos6ul.dtsi
@@ -40,6 +40,9 @@
 			reg = <1>;
 			interrupt-parent = <&gpio4>;
 			interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
+			micrel,led-mode = <1>;
+			clocks = <&clks IMX6UL_CLK_ENET_REF>;
+			clock-names = "rmii-ref";
 			status = "okay";
 		};
 	};
-- 
2.39.5

[PATCH 6.14 170/183] arm64: dts: st: Adjust interrupt-controller for stm32mp25 SoCs

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Christian Bruel <christian.bruel@foss.st.com>

[ Upstream commit de2b2107d5a41a91ab603e135fb6e408abbee28e ]

Use gic-400 compatible and remove address-cells = <1> on aarch64

Fixes: 5d30d03aaf785 ("arm64: dts: st: introduce stm32mp25 SoCs family")
Signed-off-by: Christian Bruel <christian.bruel@foss.st.com>
Link: https://lore.kernel.org/r/20250415111654.2103767-2-christian.bruel@foss.st.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/st/stm32mp251.dtsi | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/st/stm32mp251.dtsi b/arch/arm64/boot/dts/st/stm32mp251.dtsi
index f3c6cdfd7008c..379e290313dc0 100644
--- a/arch/arm64/boot/dts/st/stm32mp251.dtsi
+++ b/arch/arm64/boot/dts/st/stm32mp251.dtsi
@@ -115,9 +115,8 @@
 	};
 
 	intc: interrupt-controller@4ac00000 {
-		compatible = "arm,cortex-a7-gic";
+		compatible = "arm,gic-400";
 		#interrupt-cells = <3>;
-		#address-cells = <1>;
 		interrupt-controller;
 		reg = <0x0 0x4ac10000 0x0 0x1000>,
 		      <0x0 0x4ac20000 0x0 0x2000>,
-- 
2.39.5

[PATCH 6.14 171/183] arm64: dts: st: Use 128kB size for aliased GIC400 register access on stm32mp25 SoCs

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Christian Bruel <christian.bruel@foss.st.com>

[ Upstream commit 06c231fe953a26f4bc9d7a37ba1b9b288a59c7c2 ]

Adjust the size of 8kB GIC regions to 128kB so that each 4kB is mapped 16
times over a 64kB region.
The offset is then adjusted in the irq-gic driver.

see commit 12e14066f4835 ("irqchip/GIC: Add workaround for aliased GIC400")

Fixes: 5d30d03aaf785 ("arm64: dts: st: introduce stm32mp25 SoCs family")
Suggested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Christian Bruel <christian.bruel@foss.st.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20250415111654.2103767-3-christian.bruel@foss.st.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/st/stm32mp251.dtsi | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/boot/dts/st/stm32mp251.dtsi b/arch/arm64/boot/dts/st/stm32mp251.dtsi
index 379e290313dc0..87110f91e4895 100644
--- a/arch/arm64/boot/dts/st/stm32mp251.dtsi
+++ b/arch/arm64/boot/dts/st/stm32mp251.dtsi
@@ -119,9 +119,9 @@
 		#interrupt-cells = <3>;
 		interrupt-controller;
 		reg = <0x0 0x4ac10000 0x0 0x1000>,
-		      <0x0 0x4ac20000 0x0 0x2000>,
-		      <0x0 0x4ac40000 0x0 0x2000>,
-		      <0x0 0x4ac60000 0x0 0x2000>;
+		      <0x0 0x4ac20000 0x0 0x20000>,
+		      <0x0 0x4ac40000 0x0 0x20000>,
+		      <0x0 0x4ac60000 0x0 0x20000>;
 	};
 
 	psci {
-- 
2.39.5

[PATCH 6.14 172/183] block: introduce zone capacity helper

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Naohiro Aota <naohiro.aota@wdc.com>

[ Upstream commit c1a79b1a583654f24b17da81ba868b0064077243 ]

{bdev,disk}_zone_capacity() takes block_device or gendisk and sector position
and returns the zone capacity of the corresponding zone.

With that, move disk_nr_zones() and blk_zone_plug_bio() to consolidate them in
the same #ifdef block.

Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Stable-dep-of: 866bafae59ec ("btrfs: zoned: skip reporting zone for new block group")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/linux/blkdev.h | 67 ++++++++++++++++++++++++++++--------------
 1 file changed, 45 insertions(+), 22 deletions(-)

diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index 6aa67e9b2ec08..0fec27d6b986c 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -691,23 +691,6 @@ static inline bool blk_queue_is_zoned(struct request_queue *q)
 		(q->limits.features & BLK_FEAT_ZONED);
 }
 
-#ifdef CONFIG_BLK_DEV_ZONED
-static inline unsigned int disk_nr_zones(struct gendisk *disk)
-{
-	return disk->nr_zones;
-}
-bool blk_zone_plug_bio(struct bio *bio, unsigned int nr_segs);
-#else /* CONFIG_BLK_DEV_ZONED */
-static inline unsigned int disk_nr_zones(struct gendisk *disk)
-{
-	return 0;
-}
-static inline bool blk_zone_plug_bio(struct bio *bio, unsigned int nr_segs)
-{
-	return false;
-}
-#endif /* CONFIG_BLK_DEV_ZONED */
-
 static inline unsigned int disk_zone_no(struct gendisk *disk, sector_t sector)
 {
 	if (!blk_queue_is_zoned(disk->queue))
@@ -715,11 +698,6 @@ static inline unsigned int disk_zone_no(struct gendisk *disk, sector_t sector)
 	return sector >> ilog2(disk->queue->limits.chunk_sectors);
 }
 
-static inline unsigned int bdev_nr_zones(struct block_device *bdev)
-{
-	return disk_nr_zones(bdev->bd_disk);
-}
-
 static inline unsigned int bdev_max_open_zones(struct block_device *bdev)
 {
 	return bdev->bd_disk->queue->limits.max_open_zones;
@@ -826,6 +804,51 @@ static inline u64 sb_bdev_nr_blocks(struct super_block *sb)
 		(sb->s_blocksize_bits - SECTOR_SHIFT);
 }
 
+#ifdef CONFIG_BLK_DEV_ZONED
+static inline unsigned int disk_nr_zones(struct gendisk *disk)
+{
+	return disk->nr_zones;
+}
+bool blk_zone_plug_bio(struct bio *bio, unsigned int nr_segs);
+
+/**
+ * disk_zone_capacity - returns the zone capacity of zone containing @sector
+ * @disk:	disk to work with
+ * @sector:	sector number within the querying zone
+ *
+ * Returns the zone capacity of a zone containing @sector. @sector can be any
+ * sector in the zone.
+ */
+static inline unsigned int disk_zone_capacity(struct gendisk *disk,
+					      sector_t sector)
+{
+	sector_t zone_sectors = disk->queue->limits.chunk_sectors;
+
+	if (sector + zone_sectors >= get_capacity(disk))
+		return disk->last_zone_capacity;
+	return disk->zone_capacity;
+}
+static inline unsigned int bdev_zone_capacity(struct block_device *bdev,
+					      sector_t pos)
+{
+	return disk_zone_capacity(bdev->bd_disk, pos);
+}
+#else /* CONFIG_BLK_DEV_ZONED */
+static inline unsigned int disk_nr_zones(struct gendisk *disk)
+{
+	return 0;
+}
+static inline bool blk_zone_plug_bio(struct bio *bio, unsigned int nr_segs)
+{
+	return false;
+}
+#endif /* CONFIG_BLK_DEV_ZONED */
+
+static inline unsigned int bdev_nr_zones(struct block_device *bdev)
+{
+	return disk_nr_zones(bdev->bd_disk);
+}
+
 int bdev_disk_changed(struct gendisk *disk, bool invalidate);
 
 void put_disk(struct gendisk *disk);
-- 
2.39.5

[PATCH 6.14 173/183] btrfs: zoned: skip reporting zone for new block group

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Naohiro Aota <naohiro.aota@wdc.com>

[ Upstream commit 866bafae59ecffcf1840d846cd79740be29f21d6 ]

There is a potential deadlock if we do report zones in an IO context, detailed
in below lockdep report. When one process do a report zones and another process
freezes the block device, the report zones side cannot allocate a tag because
the freeze is already started. This can thus result in new block group creation
to hang forever, blocking the write path.

Thankfully, a new block group should be created on empty zones. So, reporting
the zones is not necessary and we can set the write pointer = 0 and load the
zone capacity from the block layer using bdev_zone_capacity() helper.

 ======================================================
 WARNING: possible circular locking dependency detected
 6.14.0-rc1 #252 Not tainted
 ------------------------------------------------------
 modprobe/1110 is trying to acquire lock:
 ffff888100ac83e0 ((work_completion)(&(&wb->dwork)->work)){+.+.}-{0:0}, at: __flush_work+0x38f/0xb60

 but task is already holding lock:
 ffff8881205b6f20 (&q->q_usage_counter(queue)#16){++++}-{0:0}, at: sd_remove+0x85/0x130

 which lock already depends on the new lock.

 the existing dependency chain (in reverse order) is:

 -> #3 (&q->q_usage_counter(queue)#16){++++}-{0:0}:
        blk_queue_enter+0x3d9/0x500
        blk_mq_alloc_request+0x47d/0x8e0
        scsi_execute_cmd+0x14f/0xb80
        sd_zbc_do_report_zones+0x1c1/0x470
        sd_zbc_report_zones+0x362/0xd60
        blkdev_report_zones+0x1b1/0x2e0
        btrfs_get_dev_zones+0x215/0x7e0 [btrfs]
        btrfs_load_block_group_zone_info+0x6d2/0x2c10 [btrfs]
        btrfs_make_block_group+0x36b/0x870 [btrfs]
        btrfs_create_chunk+0x147d/0x2320 [btrfs]
        btrfs_chunk_alloc+0x2ce/0xcf0 [btrfs]
        start_transaction+0xce6/0x1620 [btrfs]
        btrfs_uuid_scan_kthread+0x4ee/0x5b0 [btrfs]
        kthread+0x39d/0x750
        ret_from_fork+0x30/0x70
        ret_from_fork_asm+0x1a/0x30

 -> #2 (&fs_info->dev_replace.rwsem){++++}-{4:4}:
        down_read+0x9b/0x470
        btrfs_map_block+0x2ce/0x2ce0 [btrfs]
        btrfs_submit_chunk+0x2d4/0x16c0 [btrfs]
        btrfs_submit_bbio+0x16/0x30 [btrfs]
        btree_write_cache_pages+0xb5a/0xf90 [btrfs]
        do_writepages+0x17f/0x7b0
        __writeback_single_inode+0x114/0xb00
        writeback_sb_inodes+0x52b/0xe00
        wb_writeback+0x1a7/0x800
        wb_workfn+0x12a/0xbd0
        process_one_work+0x85a/0x1460
        worker_thread+0x5e2/0xfc0
        kthread+0x39d/0x750
        ret_from_fork+0x30/0x70
        ret_from_fork_asm+0x1a/0x30

 -> #1 (&fs_info->zoned_meta_io_lock){+.+.}-{4:4}:
        __mutex_lock+0x1aa/0x1360
        btree_write_cache_pages+0x252/0xf90 [btrfs]
        do_writepages+0x17f/0x7b0
        __writeback_single_inode+0x114/0xb00
        writeback_sb_inodes+0x52b/0xe00
        wb_writeback+0x1a7/0x800
        wb_workfn+0x12a/0xbd0
        process_one_work+0x85a/0x1460
        worker_thread+0x5e2/0xfc0
        kthread+0x39d/0x750
        ret_from_fork+0x30/0x70
        ret_from_fork_asm+0x1a/0x30

 -> #0 ((work_completion)(&(&wb->dwork)->work)){+.+.}-{0:0}:
        __lock_acquire+0x2f52/0x5ea0
        lock_acquire+0x1b1/0x540
        __flush_work+0x3ac/0xb60
        wb_shutdown+0x15b/0x1f0
        bdi_unregister+0x172/0x5b0
        del_gendisk+0x841/0xa20
        sd_remove+0x85/0x130
        device_release_driver_internal+0x368/0x520
        bus_remove_device+0x1f1/0x3f0
        device_del+0x3bd/0x9c0
        __scsi_remove_device+0x272/0x340
        scsi_forget_host+0xf7/0x170
        scsi_remove_host+0xd2/0x2a0
        sdebug_driver_remove+0x52/0x2f0 [scsi_debug]
        device_release_driver_internal+0x368/0x520
        bus_remove_device+0x1f1/0x3f0
        device_del+0x3bd/0x9c0
        device_unregister+0x13/0xa0
        sdebug_do_remove_host+0x1fb/0x290 [scsi_debug]
        scsi_debug_exit+0x17/0x70 [scsi_debug]
        __do_sys_delete_module.isra.0+0x321/0x520
        do_syscall_64+0x93/0x180
        entry_SYSCALL_64_after_hwframe+0x76/0x7e

 other info that might help us debug this:

 Chain exists of:
   (work_completion)(&(&wb->dwork)->work) --> &fs_info->dev_replace.rwsem --> &q->q_usage_counter(queue)#16

  Possible unsafe locking scenario:

        CPU0                    CPU1
        ----                    ----
   lock(&q->q_usage_counter(queue)#16);
                                lock(&fs_info->dev_replace.rwsem);
                                lock(&q->q_usage_counter(queue)#16);
   lock((work_completion)(&(&wb->dwork)->work));

  *** DEADLOCK ***

 5 locks held by modprobe/1110:
  #0: ffff88811f7bc108 (&dev->mutex){....}-{4:4}, at: device_release_driver_internal+0x8f/0x520
  #1: ffff8881022ee0e0 (&shost->scan_mutex){+.+.}-{4:4}, at: scsi_remove_host+0x20/0x2a0
  #2: ffff88811b4c4378 (&dev->mutex){....}-{4:4}, at: device_release_driver_internal+0x8f/0x520
  #3: ffff8881205b6f20 (&q->q_usage_counter(queue)#16){++++}-{0:0}, at: sd_remove+0x85/0x130
  #4: ffffffffa3284360 (rcu_read_lock){....}-{1:3}, at: __flush_work+0xda/0xb60

 stack backtrace:
 CPU: 0 UID: 0 PID: 1110 Comm: modprobe Not tainted 6.14.0-rc1 #252
 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-3.fc41 04/01/2014
 Call Trace:
  <TASK>
  dump_stack_lvl+0x6a/0x90
  print_circular_bug.cold+0x1e0/0x274
  check_noncircular+0x306/0x3f0
  ? __pfx_check_noncircular+0x10/0x10
  ? mark_lock+0xf5/0x1650
  ? __pfx_check_irq_usage+0x10/0x10
  ? lockdep_lock+0xca/0x1c0
  ? __pfx_lockdep_lock+0x10/0x10
  __lock_acquire+0x2f52/0x5ea0
  ? __pfx___lock_acquire+0x10/0x10
  ? __pfx_mark_lock+0x10/0x10
  lock_acquire+0x1b1/0x540
  ? __flush_work+0x38f/0xb60
  ? __pfx_lock_acquire+0x10/0x10
  ? __pfx_lock_release+0x10/0x10
  ? mark_held_locks+0x94/0xe0
  ? __flush_work+0x38f/0xb60
  __flush_work+0x3ac/0xb60
  ? __flush_work+0x38f/0xb60
  ? __pfx_mark_lock+0x10/0x10
  ? __pfx___flush_work+0x10/0x10
  ? __pfx_wq_barrier_func+0x10/0x10
  ? __pfx___might_resched+0x10/0x10
  ? mark_held_locks+0x94/0xe0
  wb_shutdown+0x15b/0x1f0
  bdi_unregister+0x172/0x5b0
  ? __pfx_bdi_unregister+0x10/0x10
  ? up_write+0x1ba/0x510
  del_gendisk+0x841/0xa20
  ? __pfx_del_gendisk+0x10/0x10
  ? _raw_spin_unlock_irqrestore+0x35/0x60
  ? __pm_runtime_resume+0x79/0x110
  sd_remove+0x85/0x130
  device_release_driver_internal+0x368/0x520
  ? kobject_put+0x5d/0x4a0
  bus_remove_device+0x1f1/0x3f0
  device_del+0x3bd/0x9c0
  ? __pfx_device_del+0x10/0x10
  __scsi_remove_device+0x272/0x340
  scsi_forget_host+0xf7/0x170
  scsi_remove_host+0xd2/0x2a0
  sdebug_driver_remove+0x52/0x2f0 [scsi_debug]
  ? kernfs_remove_by_name_ns+0xc0/0xf0
  device_release_driver_internal+0x368/0x520
  ? kobject_put+0x5d/0x4a0
  bus_remove_device+0x1f1/0x3f0
  device_del+0x3bd/0x9c0
  ? __pfx_device_del+0x10/0x10
  ? __pfx___mutex_unlock_slowpath+0x10/0x10
  device_unregister+0x13/0xa0
  sdebug_do_remove_host+0x1fb/0x290 [scsi_debug]
  scsi_debug_exit+0x17/0x70 [scsi_debug]
  __do_sys_delete_module.isra.0+0x321/0x520
  ? __pfx___do_sys_delete_module.isra.0+0x10/0x10
  ? __pfx_slab_free_after_rcu_debug+0x10/0x10
  ? kasan_save_stack+0x2c/0x50
  ? kasan_record_aux_stack+0xa3/0xb0
  ? __call_rcu_common.constprop.0+0xc4/0xfb0
  ? kmem_cache_free+0x3a0/0x590
  ? __x64_sys_close+0x78/0xd0
  do_syscall_64+0x93/0x180
  ? lock_is_held_type+0xd5/0x130
  ? __call_rcu_common.constprop.0+0x3c0/0xfb0
  ? lockdep_hardirqs_on+0x78/0x100
  ? __call_rcu_common.constprop.0+0x3c0/0xfb0
  ? __pfx___call_rcu_common.constprop.0+0x10/0x10
  ? kmem_cache_free+0x3a0/0x590
  ? lockdep_hardirqs_on_prepare+0x16d/0x400
  ? do_syscall_64+0x9f/0x180
  ? lockdep_hardirqs_on+0x78/0x100
  ? do_syscall_64+0x9f/0x180
  ? __pfx___x64_sys_openat+0x10/0x10
  ? lockdep_hardirqs_on_prepare+0x16d/0x400
  ? do_syscall_64+0x9f/0x180
  ? lockdep_hardirqs_on+0x78/0x100
  ? do_syscall_64+0x9f/0x180
  entry_SYSCALL_64_after_hwframe+0x76/0x7e
 RIP: 0033:0x7f436712b68b
 RSP: 002b:00007ffe9f1a8658 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0
 RAX: ffffffffffffffda RBX: 00005559b367fd80 RCX: 00007f436712b68b
 RDX: 0000000000000000 RSI: 0000000000000800 RDI: 00005559b367fde8
 RBP: 00007ffe9f1a8680 R08: 1999999999999999 R09: 0000000000000000
 R10: 00007f43671a5fe0 R11: 0000000000000206 R12: 0000000000000000
 R13: 00007ffe9f1a86b0 R14: 0000000000000000 R15: 0000000000000000
  </TASK>

Reported-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
CC: <stable@vger.kernel.org> # 6.13+
Tested-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/btrfs/zoned.c | 18 ++++++++++++++++--
 1 file changed, 16 insertions(+), 2 deletions(-)

diff --git a/fs/btrfs/zoned.c b/fs/btrfs/zoned.c
index 978a57da8b4f5..f39656668967c 100644
--- a/fs/btrfs/zoned.c
+++ b/fs/btrfs/zoned.c
@@ -1277,7 +1277,7 @@ struct zone_info {
 
 static int btrfs_load_zone_info(struct btrfs_fs_info *fs_info, int zone_idx,
 				struct zone_info *info, unsigned long *active,
-				struct btrfs_chunk_map *map)
+				struct btrfs_chunk_map *map, bool new)
 {
 	struct btrfs_dev_replace *dev_replace = &fs_info->dev_replace;
 	struct btrfs_device *device;
@@ -1307,6 +1307,8 @@ static int btrfs_load_zone_info(struct btrfs_fs_info *fs_info, int zone_idx,
 		return 0;
 	}
 
+	ASSERT(!new || btrfs_dev_is_empty_zone(device, info->physical));
+
 	/* This zone will be used for allocation, so mark this zone non-empty. */
 	btrfs_dev_clear_zone_empty(device, info->physical);
 
@@ -1319,6 +1321,18 @@ static int btrfs_load_zone_info(struct btrfs_fs_info *fs_info, int zone_idx,
 	 * to determine the allocation offset within the zone.
 	 */
 	WARN_ON(!IS_ALIGNED(info->physical, fs_info->zone_size));
+
+	if (new) {
+		sector_t capacity;
+
+		capacity = bdev_zone_capacity(device->bdev, info->physical >> SECTOR_SHIFT);
+		up_read(&dev_replace->rwsem);
+		info->alloc_offset = 0;
+		info->capacity = capacity << SECTOR_SHIFT;
+
+		return 0;
+	}
+
 	nofs_flag = memalloc_nofs_save();
 	ret = btrfs_get_dev_zone(device, info->physical, &zone);
 	memalloc_nofs_restore(nofs_flag);
@@ -1588,7 +1602,7 @@ int btrfs_load_block_group_zone_info(struct btrfs_block_group *cache, bool new)
 	}
 
 	for (i = 0; i < map->num_stripes; i++) {
-		ret = btrfs_load_zone_info(fs_info, i, &zone_info[i], active, map);
+		ret = btrfs_load_zone_info(fs_info, i, &zone_info[i], active, map, new);
 		if (ret)
 			goto out;
 
-- 
2.39.5

[PATCH 6.14 174/183] kernel: param: rename locate_module_kobject

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Shyam Saini <shyamsaini@linux.microsoft.com>

[ Upstream commit bbc9462f0cb0c8917a4908e856731708f0cee910 ]

The locate_module_kobject() function looks up an existing
module_kobject for a given module name. If it cannot find the
corresponding module_kobject, it creates one for the given name.

This commit renames locate_module_kobject() to
lookup_or_create_module_kobject() to better describe its operations.

This doesn't change anything functionality wise.

Suggested-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Shyam Saini <shyamsaini@linux.microsoft.com>
Link: https://lore.kernel.org/r/20250227184930.34163-2-shyamsaini@linux.microsoft.com
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Stable-dep-of: f95bbfe18512 ("drivers: base: handle module_kobject creation")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/params.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/kernel/params.c b/kernel/params.c
index 0074d29c9b80c..de1e64cc202b9 100644
--- a/kernel/params.c
+++ b/kernel/params.c
@@ -763,7 +763,7 @@ void destroy_params(const struct kernel_param *params, unsigned num)
 			params[i].ops->free(params[i].arg);
 }
 
-static struct module_kobject * __init locate_module_kobject(const char *name)
+static struct module_kobject * __init lookup_or_create_module_kobject(const char *name)
 {
 	struct module_kobject *mk;
 	struct kobject *kobj;
@@ -805,7 +805,7 @@ static void __init kernel_add_sysfs_param(const char *name,
 	struct module_kobject *mk;
 	int err;
 
-	mk = locate_module_kobject(name);
+	mk = lookup_or_create_module_kobject(name);
 	if (!mk)
 		return;
 
@@ -876,7 +876,7 @@ static void __init version_sysfs_builtin(void)
 	int err;
 
 	for (vattr = __start___modver; vattr < __stop___modver; vattr++) {
-		mk = locate_module_kobject(vattr->module_name);
+		mk = lookup_or_create_module_kobject(vattr->module_name);
 		if (mk) {
 			err = sysfs_create_file(&mk->kobj, &vattr->mattr.attr);
 			WARN_ON_ONCE(err);
-- 
2.39.5

[PATCH 6.14 175/183] kernel: globalize lookup_or_create_module_kobject()

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Shyam Saini <shyamsaini@linux.microsoft.com>

[ Upstream commit 7c76c813cfc42a7376378a0c4b7250db2eebab81 ]

lookup_or_create_module_kobject() is marked as static and __init,
to make it global drop static keyword.
Since this function can be called from non-init code, use __modinit
instead of __init, __modinit marker will make it __init if
CONFIG_MODULES is not defined.

Suggested-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Shyam Saini <shyamsaini@linux.microsoft.com>
Link: https://lore.kernel.org/r/20250227184930.34163-4-shyamsaini@linux.microsoft.com
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Stable-dep-of: f95bbfe18512 ("drivers: base: handle module_kobject creation")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/linux/module.h | 2 ++
 kernel/params.c        | 2 +-
 2 files changed, 3 insertions(+), 1 deletion(-)

diff --git a/include/linux/module.h b/include/linux/module.h
index 30e5b19bafa98..ba33bba3cc742 100644
--- a/include/linux/module.h
+++ b/include/linux/module.h
@@ -162,6 +162,8 @@ extern void cleanup_module(void);
 #define __INITRODATA_OR_MODULE __INITRODATA
 #endif /*CONFIG_MODULES*/
 
+struct module_kobject *lookup_or_create_module_kobject(const char *name);
+
 /* Generic info of form tag = "info" */
 #define MODULE_INFO(tag, info) __MODULE_INFO(tag, tag, info)
 
diff --git a/kernel/params.c b/kernel/params.c
index de1e64cc202b9..c417d28bc1dfb 100644
--- a/kernel/params.c
+++ b/kernel/params.c
@@ -763,7 +763,7 @@ void destroy_params(const struct kernel_param *params, unsigned num)
 			params[i].ops->free(params[i].arg);
 }
 
-static struct module_kobject * __init lookup_or_create_module_kobject(const char *name)
+struct module_kobject __modinit * lookup_or_create_module_kobject(const char *name)
 {
 	struct module_kobject *mk;
 	struct kobject *kobj;
-- 
2.39.5

[PATCH 6.14 176/183] drivers: base: handle module_kobject creation

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Shyam Saini <shyamsaini@linux.microsoft.com>

[ Upstream commit f95bbfe18512c5c018720468959edac056a17196 ]

module_add_driver() relies on module_kset list for
/sys/module/<built-in-module>/drivers directory creation.

Since,
commit 96a1a2412acba ("kernel/params.c: defer most of param_sysfs_init() to late_initcall time")
drivers which are initialized from subsys_initcall() or any other
higher precedence initcall couldn't find the related kobject entry
in the module_kset list because module_kset is not fully populated
by the time module_add_driver() refers it. As a consequence,
module_add_driver() returns early without calling make_driver_name().
Therefore, /sys/module/<built-in-module>/drivers is never created.

Fix this issue by letting module_add_driver() handle module_kobject
creation itself.

Fixes: 96a1a2412acb ("kernel/params.c: defer most of param_sysfs_init() to late_initcall time")
Cc: stable@vger.kernel.org # requires all other patches from the series
Suggested-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Shyam Saini <shyamsaini@linux.microsoft.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250227184930.34163-5-shyamsaini@linux.microsoft.com
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/base/module.c | 13 +++++--------
 1 file changed, 5 insertions(+), 8 deletions(-)

diff --git a/drivers/base/module.c b/drivers/base/module.c
index 5bc71bea883a0..218aaa0964552 100644
--- a/drivers/base/module.c
+++ b/drivers/base/module.c
@@ -42,16 +42,13 @@ int module_add_driver(struct module *mod, const struct device_driver *drv)
 	if (mod)
 		mk = &mod->mkobj;
 	else if (drv->mod_name) {
-		struct kobject *mkobj;
-
-		/* Lookup built-in module entry in /sys/modules */
-		mkobj = kset_find_obj(module_kset, drv->mod_name);
-		if (mkobj) {
-			mk = container_of(mkobj, struct module_kobject, kobj);
+		/* Lookup or create built-in module entry in /sys/modules */
+		mk = lookup_or_create_module_kobject(drv->mod_name);
+		if (mk) {
 			/* remember our module structure */
 			drv->p->mkobj = mk;
-			/* kset_find_obj took a reference */
-			kobject_put(mkobj);
+			/* lookup_or_create_module_kobject took a reference */
+			kobject_put(&mk->kobj);
 		}
 	}
 
-- 
2.39.5

[PATCH 6.14 177/183] btrfs: expose per-inode stable writes flag

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Qu Wenruo <wqu@suse.com>

[ Upstream commit ecde48a1a6b3256bd49db8780bf37556b157783c ]

The address space flag AS_STABLE_WRITES determine if FGP_STABLE for will
wait for the folio to finish its writeback.

For btrfs, due to the default data checksum behavior, if we modify the
folio while it's still under writeback, it will cause data checksum
mismatch.  Thus for quite some call sites we manually call
folio_wait_writeback() to prevent such problem from happening.

Currently there is only one call site inside btrfs really utilizing
FGP_STABLE, and in that case we also manually call folio_wait_writeback()
to do the waiting.

But it's better to properly expose the stable writes flag to a per-inode
basis, to allow call sites to fully benefit from FGP_STABLE flag.
E.g. for inodes with NODATASUM allowing beginning dirtying the page
without waiting for writeback.

This involves:

- Update the mapping's stable write flag when setting/clearing NODATASUM
  inode flag using ioctl
  This only works for empty files, so it should be fine.

- Update the mapping's stable write flag when reading an inode from disk

- Remove the explicit folio_wait_writeback() for FGP_BEGINWRITE call
  site

Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Stable-dep-of: 48c1d1bb525b ("btrfs: fix the inode leak in btrfs_iget()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/btrfs/btrfs_inode.h | 8 ++++++++
 fs/btrfs/file.c        | 1 -
 fs/btrfs/inode.c       | 2 ++
 fs/btrfs/ioctl.c       | 1 +
 4 files changed, 11 insertions(+), 1 deletion(-)

diff --git a/fs/btrfs/btrfs_inode.h b/fs/btrfs/btrfs_inode.h
index b2fa33911c280..029fba82b81da 100644
--- a/fs/btrfs/btrfs_inode.h
+++ b/fs/btrfs/btrfs_inode.h
@@ -516,6 +516,14 @@ static inline void btrfs_assert_inode_locked(struct btrfs_inode *inode)
 	lockdep_assert_held(&inode->vfs_inode.i_rwsem);
 }
 
+static inline void btrfs_update_inode_mapping_flags(struct btrfs_inode *inode)
+{
+	if (inode->flags & BTRFS_INODE_NODATASUM)
+		mapping_clear_stable_writes(inode->vfs_inode.i_mapping);
+	else
+		mapping_set_stable_writes(inode->vfs_inode.i_mapping);
+}
+
 /* Array of bytes with variable length, hexadecimal format 0x1234 */
 #define CSUM_FMT				"0x%*phN"
 #define CSUM_FMT_VALUE(size, bytes)		size, bytes
diff --git a/fs/btrfs/file.c b/fs/btrfs/file.c
index a92997a583bd2..cd4e40a719186 100644
--- a/fs/btrfs/file.c
+++ b/fs/btrfs/file.c
@@ -874,7 +874,6 @@ static noinline int prepare_one_folio(struct inode *inode, struct folio **folio_
 			ret = PTR_ERR(folio);
 		return ret;
 	}
-	folio_wait_writeback(folio);
 	/* Only support page sized folio yet. */
 	ASSERT(folio_order(folio) == 0);
 	ret = set_folio_extent_mapped(folio);
diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c
index 0db50d19b9a1f..90782fd9f37b8 100644
--- a/fs/btrfs/inode.c
+++ b/fs/btrfs/inode.c
@@ -3925,6 +3925,7 @@ static int btrfs_read_locked_inode(struct inode *inode, struct btrfs_path *path)
 
 	btrfs_inode_split_flags(btrfs_inode_flags(leaf, inode_item),
 				&BTRFS_I(inode)->flags, &BTRFS_I(inode)->ro_flags);
+	btrfs_update_inode_mapping_flags(BTRFS_I(inode));
 
 cache_index:
 	/*
@@ -6340,6 +6341,7 @@ int btrfs_create_new_inode(struct btrfs_trans_handle *trans,
 		if (btrfs_test_opt(fs_info, NODATACOW))
 			BTRFS_I(inode)->flags |= BTRFS_INODE_NODATACOW |
 				BTRFS_INODE_NODATASUM;
+		btrfs_update_inode_mapping_flags(BTRFS_I(inode));
 	}
 
 	ret = btrfs_insert_inode_locked(inode);
diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c
index e666c141cae0b..10a97f0af8d4b 100644
--- a/fs/btrfs/ioctl.c
+++ b/fs/btrfs/ioctl.c
@@ -393,6 +393,7 @@ int btrfs_fileattr_set(struct mnt_idmap *idmap,
 
 update_flags:
 	binode->flags = binode_flags;
+	btrfs_update_inode_mapping_flags(binode);
 	btrfs_sync_inode_flags_to_i_flags(inode);
 	inode_inc_iversion(inode);
 	inode_set_ctime_current(inode);
-- 
2.39.5

[PATCH 6.14 178/183] btrfs: pass struct btrfs_inode to btrfs_read_locked_inode()

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: David Sterba <dsterba@suse.com>

[ Upstream commit d36f84a849c7685099594815a1e5a48db62c243d ]

Pass a struct btrfs_inode to btrfs_read_locked_inode() as it's an
internal interface, allowing to remove some use of BTRFS_I.

Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Stable-dep-of: 48c1d1bb525b ("btrfs: fix the inode leak in btrfs_iget()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/btrfs/inode.c | 119 +++++++++++++++++++++++------------------------
 1 file changed, 58 insertions(+), 61 deletions(-)

diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c
index 90782fd9f37b8..6d9d1c255285d 100644
--- a/fs/btrfs/inode.c
+++ b/fs/btrfs/inode.c
@@ -3846,12 +3846,13 @@ static int btrfs_add_inode_to_root(struct btrfs_inode *inode, bool prealloc)
  *
  * On failure clean up the inode.
  */
-static int btrfs_read_locked_inode(struct inode *inode, struct btrfs_path *path)
+static int btrfs_read_locked_inode(struct btrfs_inode *inode, struct btrfs_path *path)
 {
-	struct btrfs_fs_info *fs_info = inode_to_fs_info(inode);
+	struct btrfs_root *root = inode->root;
+	struct btrfs_fs_info *fs_info = root->fs_info;
 	struct extent_buffer *leaf;
 	struct btrfs_inode_item *inode_item;
-	struct btrfs_root *root = BTRFS_I(inode)->root;
+	struct inode *vfs_inode = &inode->vfs_inode;
 	struct btrfs_key location;
 	unsigned long ptr;
 	int maybe_acls;
@@ -3860,17 +3861,17 @@ static int btrfs_read_locked_inode(struct inode *inode, struct btrfs_path *path)
 	bool filled = false;
 	int first_xattr_slot;
 
-	ret = btrfs_init_file_extent_tree(BTRFS_I(inode));
+	ret = btrfs_init_file_extent_tree(inode);
 	if (ret)
 		goto out;
 
-	ret = btrfs_fill_inode(inode, &rdev);
+	ret = btrfs_fill_inode(vfs_inode, &rdev);
 	if (!ret)
 		filled = true;
 
 	ASSERT(path);
 
-	btrfs_get_inode_key(BTRFS_I(inode), &location);
+	btrfs_get_inode_key(inode, &location);
 
 	ret = btrfs_lookup_inode(NULL, root, path, &location, 0);
 	if (ret) {
@@ -3890,42 +3891,41 @@ static int btrfs_read_locked_inode(struct inode *inode, struct btrfs_path *path)
 
 	inode_item = btrfs_item_ptr(leaf, path->slots[0],
 				    struct btrfs_inode_item);
-	inode->i_mode = btrfs_inode_mode(leaf, inode_item);
-	set_nlink(inode, btrfs_inode_nlink(leaf, inode_item));
-	i_uid_write(inode, btrfs_inode_uid(leaf, inode_item));
-	i_gid_write(inode, btrfs_inode_gid(leaf, inode_item));
-	btrfs_i_size_write(BTRFS_I(inode), btrfs_inode_size(leaf, inode_item));
-	btrfs_inode_set_file_extent_range(BTRFS_I(inode), 0,
-			round_up(i_size_read(inode), fs_info->sectorsize));
-
-	inode_set_atime(inode, btrfs_timespec_sec(leaf, &inode_item->atime),
+	vfs_inode->i_mode = btrfs_inode_mode(leaf, inode_item);
+	set_nlink(vfs_inode, btrfs_inode_nlink(leaf, inode_item));
+	i_uid_write(vfs_inode, btrfs_inode_uid(leaf, inode_item));
+	i_gid_write(vfs_inode, btrfs_inode_gid(leaf, inode_item));
+	btrfs_i_size_write(inode, btrfs_inode_size(leaf, inode_item));
+	btrfs_inode_set_file_extent_range(inode, 0,
+			round_up(i_size_read(vfs_inode), fs_info->sectorsize));
+
+	inode_set_atime(vfs_inode, btrfs_timespec_sec(leaf, &inode_item->atime),
 			btrfs_timespec_nsec(leaf, &inode_item->atime));
 
-	inode_set_mtime(inode, btrfs_timespec_sec(leaf, &inode_item->mtime),
+	inode_set_mtime(vfs_inode, btrfs_timespec_sec(leaf, &inode_item->mtime),
 			btrfs_timespec_nsec(leaf, &inode_item->mtime));
 
-	inode_set_ctime(inode, btrfs_timespec_sec(leaf, &inode_item->ctime),
+	inode_set_ctime(vfs_inode, btrfs_timespec_sec(leaf, &inode_item->ctime),
 			btrfs_timespec_nsec(leaf, &inode_item->ctime));
 
-	BTRFS_I(inode)->i_otime_sec = btrfs_timespec_sec(leaf, &inode_item->otime);
-	BTRFS_I(inode)->i_otime_nsec = btrfs_timespec_nsec(leaf, &inode_item->otime);
+	inode->i_otime_sec = btrfs_timespec_sec(leaf, &inode_item->otime);
+	inode->i_otime_nsec = btrfs_timespec_nsec(leaf, &inode_item->otime);
 
-	inode_set_bytes(inode, btrfs_inode_nbytes(leaf, inode_item));
-	BTRFS_I(inode)->generation = btrfs_inode_generation(leaf, inode_item);
-	BTRFS_I(inode)->last_trans = btrfs_inode_transid(leaf, inode_item);
+	inode_set_bytes(vfs_inode, btrfs_inode_nbytes(leaf, inode_item));
+	inode->generation = btrfs_inode_generation(leaf, inode_item);
+	inode->last_trans = btrfs_inode_transid(leaf, inode_item);
 
-	inode_set_iversion_queried(inode,
-				   btrfs_inode_sequence(leaf, inode_item));
-	inode->i_generation = BTRFS_I(inode)->generation;
-	inode->i_rdev = 0;
+	inode_set_iversion_queried(vfs_inode, btrfs_inode_sequence(leaf, inode_item));
+	vfs_inode->i_generation = inode->generation;
+	vfs_inode->i_rdev = 0;
 	rdev = btrfs_inode_rdev(leaf, inode_item);
 
-	if (S_ISDIR(inode->i_mode))
-		BTRFS_I(inode)->index_cnt = (u64)-1;
+	if (S_ISDIR(vfs_inode->i_mode))
+		inode->index_cnt = (u64)-1;
 
 	btrfs_inode_split_flags(btrfs_inode_flags(leaf, inode_item),
-				&BTRFS_I(inode)->flags, &BTRFS_I(inode)->ro_flags);
-	btrfs_update_inode_mapping_flags(BTRFS_I(inode));
+				&inode->flags, &inode->ro_flags);
+	btrfs_update_inode_mapping_flags(inode);
 
 cache_index:
 	/*
@@ -3937,9 +3937,8 @@ static int btrfs_read_locked_inode(struct inode *inode, struct btrfs_path *path)
 	 * This is required for both inode re-read from disk and delayed inode
 	 * in the delayed_nodes xarray.
 	 */
-	if (BTRFS_I(inode)->last_trans == btrfs_get_fs_generation(fs_info))
-		set_bit(BTRFS_INODE_NEEDS_FULL_SYNC,
-			&BTRFS_I(inode)->runtime_flags);
+	if (inode->last_trans == btrfs_get_fs_generation(fs_info))
+		set_bit(BTRFS_INODE_NEEDS_FULL_SYNC, &inode->runtime_flags);
 
 	/*
 	 * We don't persist the id of the transaction where an unlink operation
@@ -3968,7 +3967,7 @@ static int btrfs_read_locked_inode(struct inode *inode, struct btrfs_path *path)
 	 * transaction commits on fsync if our inode is a directory, or if our
 	 * inode is not a directory, logging its parent unnecessarily.
 	 */
-	BTRFS_I(inode)->last_unlink_trans = BTRFS_I(inode)->last_trans;
+	inode->last_unlink_trans = inode->last_trans;
 
 	/*
 	 * Same logic as for last_unlink_trans. We don't persist the generation
@@ -3976,15 +3975,15 @@ static int btrfs_read_locked_inode(struct inode *inode, struct btrfs_path *path)
 	 * operation, so after eviction and reloading the inode we must be
 	 * pessimistic and assume the last transaction that modified the inode.
 	 */
-	BTRFS_I(inode)->last_reflink_trans = BTRFS_I(inode)->last_trans;
+	inode->last_reflink_trans = inode->last_trans;
 
 	path->slots[0]++;
-	if (inode->i_nlink != 1 ||
+	if (vfs_inode->i_nlink != 1 ||
 	    path->slots[0] >= btrfs_header_nritems(leaf))
 		goto cache_acl;
 
 	btrfs_item_key_to_cpu(leaf, &location, path->slots[0]);
-	if (location.objectid != btrfs_ino(BTRFS_I(inode)))
+	if (location.objectid != btrfs_ino(inode))
 		goto cache_acl;
 
 	ptr = btrfs_item_ptr_offset(leaf, path->slots[0]);
@@ -3992,13 +3991,12 @@ static int btrfs_read_locked_inode(struct inode *inode, struct btrfs_path *path)
 		struct btrfs_inode_ref *ref;
 
 		ref = (struct btrfs_inode_ref *)ptr;
-		BTRFS_I(inode)->dir_index = btrfs_inode_ref_index(leaf, ref);
+		inode->dir_index = btrfs_inode_ref_index(leaf, ref);
 	} else if (location.type == BTRFS_INODE_EXTREF_KEY) {
 		struct btrfs_inode_extref *extref;
 
 		extref = (struct btrfs_inode_extref *)ptr;
-		BTRFS_I(inode)->dir_index = btrfs_inode_extref_index(leaf,
-								     extref);
+		inode->dir_index = btrfs_inode_extref_index(leaf, extref);
 	}
 cache_acl:
 	/*
@@ -4006,50 +4004,49 @@ static int btrfs_read_locked_inode(struct inode *inode, struct btrfs_path *path)
 	 * any xattrs or acls
 	 */
 	maybe_acls = acls_after_inode_item(leaf, path->slots[0],
-			btrfs_ino(BTRFS_I(inode)), &first_xattr_slot);
+					   btrfs_ino(inode), &first_xattr_slot);
 	if (first_xattr_slot != -1) {
 		path->slots[0] = first_xattr_slot;
-		ret = btrfs_load_inode_props(inode, path);
+		ret = btrfs_load_inode_props(vfs_inode, path);
 		if (ret)
 			btrfs_err(fs_info,
 				  "error loading props for ino %llu (root %llu): %d",
-				  btrfs_ino(BTRFS_I(inode)),
-				  btrfs_root_id(root), ret);
+				  btrfs_ino(inode), btrfs_root_id(root), ret);
 	}
 
 	if (!maybe_acls)
-		cache_no_acl(inode);
+		cache_no_acl(vfs_inode);
 
-	switch (inode->i_mode & S_IFMT) {
+	switch (vfs_inode->i_mode & S_IFMT) {
 	case S_IFREG:
-		inode->i_mapping->a_ops = &btrfs_aops;
-		inode->i_fop = &btrfs_file_operations;
-		inode->i_op = &btrfs_file_inode_operations;
+		vfs_inode->i_mapping->a_ops = &btrfs_aops;
+		vfs_inode->i_fop = &btrfs_file_operations;
+		vfs_inode->i_op = &btrfs_file_inode_operations;
 		break;
 	case S_IFDIR:
-		inode->i_fop = &btrfs_dir_file_operations;
-		inode->i_op = &btrfs_dir_inode_operations;
+		vfs_inode->i_fop = &btrfs_dir_file_operations;
+		vfs_inode->i_op = &btrfs_dir_inode_operations;
 		break;
 	case S_IFLNK:
-		inode->i_op = &btrfs_symlink_inode_operations;
-		inode_nohighmem(inode);
-		inode->i_mapping->a_ops = &btrfs_aops;
+		vfs_inode->i_op = &btrfs_symlink_inode_operations;
+		inode_nohighmem(vfs_inode);
+		vfs_inode->i_mapping->a_ops = &btrfs_aops;
 		break;
 	default:
-		inode->i_op = &btrfs_special_inode_operations;
-		init_special_inode(inode, inode->i_mode, rdev);
+		vfs_inode->i_op = &btrfs_special_inode_operations;
+		init_special_inode(vfs_inode, vfs_inode->i_mode, rdev);
 		break;
 	}
 
-	btrfs_sync_inode_flags_to_i_flags(inode);
+	btrfs_sync_inode_flags_to_i_flags(vfs_inode);
 
-	ret = btrfs_add_inode_to_root(BTRFS_I(inode), true);
+	ret = btrfs_add_inode_to_root(inode, true);
 	if (ret)
 		goto out;
 
 	return 0;
 out:
-	iget_failed(inode);
+	iget_failed(vfs_inode);
 	return ret;
 }
 
@@ -5636,7 +5633,7 @@ struct inode *btrfs_iget_path(u64 ino, struct btrfs_root *root,
 	if (!(inode->i_state & I_NEW))
 		return inode;
 
-	ret = btrfs_read_locked_inode(inode, path);
+	ret = btrfs_read_locked_inode(BTRFS_I(inode), path);
 	if (ret)
 		return ERR_PTR(ret);
 
@@ -5664,7 +5661,7 @@ struct inode *btrfs_iget(u64 ino, struct btrfs_root *root)
 	if (!path)
 		return ERR_PTR(-ENOMEM);
 
-	ret = btrfs_read_locked_inode(inode, path);
+	ret = btrfs_read_locked_inode(BTRFS_I(inode), path);
 	btrfs_free_path(path);
 	if (ret)
 		return ERR_PTR(ret);
-- 
2.39.5

[PATCH 6.14 179/183] btrfs: pass struct btrfs_inode to btrfs_iget_locked()

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: David Sterba <dsterba@suse.com>

[ Upstream commit 4ea2fb9c628b55929bbc380d8c18733d1d027f1d ]

Pass a struct btrfs_inode to btrfs_inode() as it's an internal
interface, allowing to remove some use of BTRFS_I.

Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Stable-dep-of: 48c1d1bb525b ("btrfs: fix the inode leak in btrfs_iget()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/btrfs/inode.c | 30 ++++++++++++++++--------------
 1 file changed, 16 insertions(+), 14 deletions(-)

diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c
index 6d9d1c255285d..f6fc4c9ace28c 100644
--- a/fs/btrfs/inode.c
+++ b/fs/btrfs/inode.c
@@ -5601,7 +5601,7 @@ static int btrfs_find_actor(struct inode *inode, void *opaque)
 		args->root == BTRFS_I(inode)->root;
 }
 
-static struct inode *btrfs_iget_locked(u64 ino, struct btrfs_root *root)
+static struct btrfs_inode *btrfs_iget_locked(u64 ino, struct btrfs_root *root)
 {
 	struct inode *inode;
 	struct btrfs_iget_args args;
@@ -5613,7 +5613,9 @@ static struct inode *btrfs_iget_locked(u64 ino, struct btrfs_root *root)
 	inode = iget5_locked_rcu(root->fs_info->sb, hashval, btrfs_find_actor,
 			     btrfs_init_locked_inode,
 			     (void *)&args);
-	return inode;
+	if (!inode)
+		return NULL;
+	return BTRFS_I(inode);
 }
 
 /*
@@ -5623,22 +5625,22 @@ static struct inode *btrfs_iget_locked(u64 ino, struct btrfs_root *root)
 struct inode *btrfs_iget_path(u64 ino, struct btrfs_root *root,
 			      struct btrfs_path *path)
 {
-	struct inode *inode;
+	struct btrfs_inode *inode;
 	int ret;
 
 	inode = btrfs_iget_locked(ino, root);
 	if (!inode)
 		return ERR_PTR(-ENOMEM);
 
-	if (!(inode->i_state & I_NEW))
-		return inode;
+	if (!(inode->vfs_inode.i_state & I_NEW))
+		return &inode->vfs_inode;
 
-	ret = btrfs_read_locked_inode(BTRFS_I(inode), path);
+	ret = btrfs_read_locked_inode(inode, path);
 	if (ret)
 		return ERR_PTR(ret);
 
-	unlock_new_inode(inode);
-	return inode;
+	unlock_new_inode(&inode->vfs_inode);
+	return &inode->vfs_inode;
 }
 
 /*
@@ -5646,7 +5648,7 @@ struct inode *btrfs_iget_path(u64 ino, struct btrfs_root *root,
  */
 struct inode *btrfs_iget(u64 ino, struct btrfs_root *root)
 {
-	struct inode *inode;
+	struct btrfs_inode *inode;
 	struct btrfs_path *path;
 	int ret;
 
@@ -5654,20 +5656,20 @@ struct inode *btrfs_iget(u64 ino, struct btrfs_root *root)
 	if (!inode)
 		return ERR_PTR(-ENOMEM);
 
-	if (!(inode->i_state & I_NEW))
-		return inode;
+	if (!(inode->vfs_inode.i_state & I_NEW))
+		return &inode->vfs_inode;
 
 	path = btrfs_alloc_path();
 	if (!path)
 		return ERR_PTR(-ENOMEM);
 
-	ret = btrfs_read_locked_inode(BTRFS_I(inode), path);
+	ret = btrfs_read_locked_inode(inode, path);
 	btrfs_free_path(path);
 	if (ret)
 		return ERR_PTR(ret);
 
-	unlock_new_inode(inode);
-	return inode;
+	unlock_new_inode(&inode->vfs_inode);
+	return &inode->vfs_inode;
 }
 
 static struct inode *new_simple_dir(struct inode *dir,
-- 
2.39.5

[PATCH 6.14 180/183] btrfs: fix the inode leak in btrfs_iget()

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Penglei Jiang <superman.xpt@gmail.com>

[ Upstream commit 48c1d1bb525b1c44b8bdc8e7ec5629cb6c2b9fc4 ]

[BUG]
There is a bug report that a syzbot reproducer can lead to the following
busy inode at unmount time:

  BTRFS info (device loop1): last unmount of filesystem 1680000e-3c1e-4c46-84b6-56bd3909af50
  VFS: Busy inodes after unmount of loop1 (btrfs)
  ------------[ cut here ]------------
  kernel BUG at fs/super.c:650!
  Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI
  CPU: 0 UID: 0 PID: 48168 Comm: syz-executor Not tainted 6.15.0-rc2-00471-g119009db2674 #2 PREEMPT(full)
  Hardware name: QEMU Ubuntu 24.04 PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
  RIP: 0010:generic_shutdown_super+0x2e9/0x390 fs/super.c:650
  Call Trace:
   <TASK>
   kill_anon_super+0x3a/0x60 fs/super.c:1237
   btrfs_kill_super+0x3b/0x50 fs/btrfs/super.c:2099
   deactivate_locked_super+0xbe/0x1a0 fs/super.c:473
   deactivate_super fs/super.c:506 [inline]
   deactivate_super+0xe2/0x100 fs/super.c:502
   cleanup_mnt+0x21f/0x440 fs/namespace.c:1435
   task_work_run+0x14d/0x240 kernel/task_work.c:227
   resume_user_mode_work include/linux/resume_user_mode.h:50 [inline]
   exit_to_user_mode_loop kernel/entry/common.c:114 [inline]
   exit_to_user_mode_prepare include/linux/entry-common.h:329 [inline]
   __syscall_exit_to_user_mode_work kernel/entry/common.c:207 [inline]
   syscall_exit_to_user_mode+0x269/0x290 kernel/entry/common.c:218
   do_syscall_64+0xd4/0x250 arch/x86/entry/syscall_64.c:100
   entry_SYSCALL_64_after_hwframe+0x77/0x7f
   </TASK>

[CAUSE]
When btrfs_alloc_path() failed, btrfs_iget() directly returned without
releasing the inode already allocated by btrfs_iget_locked().

This results the above busy inode and trigger the kernel BUG.

[FIX]
Fix it by calling iget_failed() if btrfs_alloc_path() failed.

If we hit error inside btrfs_read_locked_inode(), it will properly call
iget_failed(), so nothing to worry about.

Although the iget_failed() cleanup inside btrfs_read_locked_inode() is a
break of the normal error handling scheme, let's fix the obvious bug
and backport first, then rework the error handling later.

Reported-by: Penglei Jiang <superman.xpt@gmail.com>
Link: https://lore.kernel.org/linux-btrfs/20250421102425.44431-1-superman.xpt@gmail.com/
Fixes: 7c855e16ab72 ("btrfs: remove conditional path allocation in btrfs_read_locked_inode()")
CC: stable@vger.kernel.org # 6.13+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Penglei Jiang <superman.xpt@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/btrfs/inode.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c
index f6fc4c9ace28c..3be6f8e8e157d 100644
--- a/fs/btrfs/inode.c
+++ b/fs/btrfs/inode.c
@@ -5660,8 +5660,10 @@ struct inode *btrfs_iget(u64 ino, struct btrfs_root *root)
 		return &inode->vfs_inode;
 
 	path = btrfs_alloc_path();
-	if (!path)
+	if (!path) {
+		iget_failed(&inode->vfs_inode);
 		return ERR_PTR(-ENOMEM);
+	}
 
 	ret = btrfs_read_locked_inode(inode, path);
 	btrfs_free_path(path);
-- 
2.39.5

[PATCH 6.14 181/183] drm/amd/display: Add scoped mutexes for amdgpu_dm_dhcp

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mario Limonciello <mario.limonciello@amd.com>

[ Upstream commit 6b675ab8efbf2bcee25be29e865455c56e246401 ]

[Why]
Guards automatically release mutex when it goes out of scope making
code easier to follow.

[How]
Replace all use of mutex_lock()/mutex_unlock() with guard(mutex).

Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: be593d9d91c5 ("drm/amd/display: Fix slab-use-after-free in hdcp")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../amd/display/amdgpu_dm/amdgpu_dm_hdcp.c    | 37 +++++--------------
 1 file changed, 10 insertions(+), 27 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_hdcp.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_hdcp.c
index c0dc232440490..53796a74b7a65 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_hdcp.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_hdcp.c
@@ -172,7 +172,7 @@ void hdcp_update_display(struct hdcp_workqueue *hdcp_work,
 	struct mod_hdcp_display_adjustment display_adjust;
 	unsigned int conn_index = aconnector->base.index;
 
-	mutex_lock(&hdcp_w->mutex);
+	guard(mutex)(&hdcp_w->mutex);
 	hdcp_w->aconnector[conn_index] = aconnector;
 
 	memset(&link_adjust, 0, sizeof(link_adjust));
@@ -209,7 +209,6 @@ void hdcp_update_display(struct hdcp_workqueue *hdcp_work,
 	mod_hdcp_update_display(&hdcp_w->hdcp, conn_index, &link_adjust, &display_adjust, &hdcp_w->output);
 
 	process_output(hdcp_w);
-	mutex_unlock(&hdcp_w->mutex);
 }
 
 static void hdcp_remove_display(struct hdcp_workqueue *hdcp_work,
@@ -220,7 +219,7 @@ static void hdcp_remove_display(struct hdcp_workqueue *hdcp_work,
 	struct drm_connector_state *conn_state = aconnector->base.state;
 	unsigned int conn_index = aconnector->base.index;
 
-	mutex_lock(&hdcp_w->mutex);
+	guard(mutex)(&hdcp_w->mutex);
 	hdcp_w->aconnector[conn_index] = aconnector;
 
 	/* the removal of display will invoke auth reset -> hdcp destroy and
@@ -239,7 +238,6 @@ static void hdcp_remove_display(struct hdcp_workqueue *hdcp_work,
 	mod_hdcp_remove_display(&hdcp_w->hdcp, aconnector->base.index, &hdcp_w->output);
 
 	process_output(hdcp_w);
-	mutex_unlock(&hdcp_w->mutex);
 }
 
 void hdcp_reset_display(struct hdcp_workqueue *hdcp_work, unsigned int link_index)
@@ -247,7 +245,7 @@ void hdcp_reset_display(struct hdcp_workqueue *hdcp_work, unsigned int link_inde
 	struct hdcp_workqueue *hdcp_w = &hdcp_work[link_index];
 	unsigned int conn_index;
 
-	mutex_lock(&hdcp_w->mutex);
+	guard(mutex)(&hdcp_w->mutex);
 
 	mod_hdcp_reset_connection(&hdcp_w->hdcp,  &hdcp_w->output);
 
@@ -259,8 +257,6 @@ void hdcp_reset_display(struct hdcp_workqueue *hdcp_work, unsigned int link_inde
 	}
 
 	process_output(hdcp_w);
-
-	mutex_unlock(&hdcp_w->mutex);
 }
 
 void hdcp_handle_cpirq(struct hdcp_workqueue *hdcp_work, unsigned int link_index)
@@ -277,7 +273,7 @@ static void event_callback(struct work_struct *work)
 	hdcp_work = container_of(to_delayed_work(work), struct hdcp_workqueue,
 				 callback_dwork);
 
-	mutex_lock(&hdcp_work->mutex);
+	guard(mutex)(&hdcp_work->mutex);
 
 	cancel_delayed_work(&hdcp_work->callback_dwork);
 
@@ -285,8 +281,6 @@ static void event_callback(struct work_struct *work)
 			       &hdcp_work->output);
 
 	process_output(hdcp_work);
-
-	mutex_unlock(&hdcp_work->mutex);
 }
 
 static void event_property_update(struct work_struct *work)
@@ -323,7 +317,7 @@ static void event_property_update(struct work_struct *work)
 			continue;
 
 		drm_modeset_lock(&dev->mode_config.connection_mutex, NULL);
-		mutex_lock(&hdcp_work->mutex);
+		guard(mutex)(&hdcp_work->mutex);
 
 		if (conn_state->commit) {
 			ret = wait_for_completion_interruptible_timeout(&conn_state->commit->hw_done,
@@ -355,7 +349,6 @@ static void event_property_update(struct work_struct *work)
 			drm_hdcp_update_content_protection(connector,
 							   DRM_MODE_CONTENT_PROTECTION_DESIRED);
 		}
-		mutex_unlock(&hdcp_work->mutex);
 		drm_modeset_unlock(&dev->mode_config.connection_mutex);
 	}
 }
@@ -368,7 +361,7 @@ static void event_property_validate(struct work_struct *work)
 	struct amdgpu_dm_connector *aconnector;
 	unsigned int conn_index;
 
-	mutex_lock(&hdcp_work->mutex);
+	guard(mutex)(&hdcp_work->mutex);
 
 	for (conn_index = 0; conn_index < AMDGPU_DM_MAX_DISPLAY_INDEX;
 	     conn_index++) {
@@ -408,8 +401,6 @@ static void event_property_validate(struct work_struct *work)
 			schedule_work(&hdcp_work->property_update_work);
 		}
 	}
-
-	mutex_unlock(&hdcp_work->mutex);
 }
 
 static void event_watchdog_timer(struct work_struct *work)
@@ -420,7 +411,7 @@ static void event_watchdog_timer(struct work_struct *work)
 				 struct hdcp_workqueue,
 				      watchdog_timer_dwork);
 
-	mutex_lock(&hdcp_work->mutex);
+	guard(mutex)(&hdcp_work->mutex);
 
 	cancel_delayed_work(&hdcp_work->watchdog_timer_dwork);
 
@@ -429,8 +420,6 @@ static void event_watchdog_timer(struct work_struct *work)
 			       &hdcp_work->output);
 
 	process_output(hdcp_work);
-
-	mutex_unlock(&hdcp_work->mutex);
 }
 
 static void event_cpirq(struct work_struct *work)
@@ -439,13 +428,11 @@ static void event_cpirq(struct work_struct *work)
 
 	hdcp_work = container_of(work, struct hdcp_workqueue, cpirq_work);
 
-	mutex_lock(&hdcp_work->mutex);
+	guard(mutex)(&hdcp_work->mutex);
 
 	mod_hdcp_process_event(&hdcp_work->hdcp, MOD_HDCP_EVENT_CPIRQ, &hdcp_work->output);
 
 	process_output(hdcp_work);
-
-	mutex_unlock(&hdcp_work->mutex);
 }
 
 void hdcp_destroy(struct kobject *kobj, struct hdcp_workqueue *hdcp_work)
@@ -479,7 +466,7 @@ static bool enable_assr(void *handle, struct dc_link *link)
 
 	dtm_cmd = (struct ta_dtm_shared_memory *)psp->dtm_context.context.mem_context.shared_buf;
 
-	mutex_lock(&psp->dtm_context.mutex);
+	guard(mutex)(&psp->dtm_context.mutex);
 	memset(dtm_cmd, 0, sizeof(struct ta_dtm_shared_memory));
 
 	dtm_cmd->cmd_id = TA_DTM_COMMAND__TOPOLOGY_ASSR_ENABLE;
@@ -494,8 +481,6 @@ static bool enable_assr(void *handle, struct dc_link *link)
 		res = false;
 	}
 
-	mutex_unlock(&psp->dtm_context.mutex);
-
 	return res;
 }
 
@@ -557,13 +542,11 @@ static void update_config(void *handle, struct cp_psp_stream_config *config)
 			 (!!aconnector->base.state) ?
 			 aconnector->base.state->hdcp_content_type : -1);
 
-	mutex_lock(&hdcp_w->mutex);
+	guard(mutex)(&hdcp_w->mutex);
 
 	mod_hdcp_add_display(&hdcp_w->hdcp, link, display, &hdcp_w->output);
 
 	process_output(hdcp_w);
-	mutex_unlock(&hdcp_w->mutex);
-
 }
 
 /**
-- 
2.39.5

[PATCH 6.14 182/183] drm/amd/display: Fix slab-use-after-free in hdcp

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Chris Bainbridge <chris.bainbridge@gmail.com>

[ Upstream commit be593d9d91c5a3a363d456b9aceb71029aeb3f1d ]

The HDCP code in amdgpu_dm_hdcp.c copies pointers to amdgpu_dm_connector
objects without incrementing the kref reference counts. When using a
USB-C dock, and the dock is unplugged, the corresponding
amdgpu_dm_connector objects are freed, creating dangling pointers in the
HDCP code. When the dock is plugged back, the dangling pointers are
dereferenced, resulting in a slab-use-after-free:

[   66.775837] BUG: KASAN: slab-use-after-free in event_property_validate+0x42f/0x6c0 [amdgpu]
[   66.776171] Read of size 4 at addr ffff888127804120 by task kworker/0:1/10

[   66.776179] CPU: 0 UID: 0 PID: 10 Comm: kworker/0:1 Not tainted 6.14.0-rc7-00180-g54505f727a38-dirty #233
[   66.776183] Hardware name: HP HP Pavilion Aero Laptop 13-be0xxx/8916, BIOS F.17 12/18/2024
[   66.776186] Workqueue: events event_property_validate [amdgpu]
[   66.776494] Call Trace:
[   66.776496]  <TASK>
[   66.776497]  dump_stack_lvl+0x70/0xa0
[   66.776504]  print_report+0x175/0x555
[   66.776507]  ? __virt_addr_valid+0x243/0x450
[   66.776510]  ? kasan_complete_mode_report_info+0x66/0x1c0
[   66.776515]  kasan_report+0xeb/0x1c0
[   66.776518]  ? event_property_validate+0x42f/0x6c0 [amdgpu]
[   66.776819]  ? event_property_validate+0x42f/0x6c0 [amdgpu]
[   66.777121]  __asan_report_load4_noabort+0x14/0x20
[   66.777124]  event_property_validate+0x42f/0x6c0 [amdgpu]
[   66.777342]  ? __lock_acquire+0x6b40/0x6b40
[   66.777347]  ? enable_assr+0x250/0x250 [amdgpu]
[   66.777571]  process_one_work+0x86b/0x1510
[   66.777575]  ? pwq_dec_nr_in_flight+0xcf0/0xcf0
[   66.777578]  ? assign_work+0x16b/0x280
[   66.777580]  ? lock_is_held_type+0xa3/0x130
[   66.777583]  worker_thread+0x5c0/0xfa0
[   66.777587]  ? process_one_work+0x1510/0x1510
[   66.777588]  kthread+0x3a2/0x840
[   66.777591]  ? kthread_is_per_cpu+0xd0/0xd0
[   66.777594]  ? trace_hardirqs_on+0x4f/0x60
[   66.777597]  ? _raw_spin_unlock_irq+0x27/0x60
[   66.777599]  ? calculate_sigpending+0x77/0xa0
[   66.777602]  ? kthread_is_per_cpu+0xd0/0xd0
[   66.777605]  ret_from_fork+0x40/0x90
[   66.777607]  ? kthread_is_per_cpu+0xd0/0xd0
[   66.777609]  ret_from_fork_asm+0x11/0x20
[   66.777614]  </TASK>

[   66.777643] Allocated by task 10:
[   66.777646]  kasan_save_stack+0x39/0x60
[   66.777649]  kasan_save_track+0x14/0x40
[   66.777652]  kasan_save_alloc_info+0x37/0x50
[   66.777655]  __kasan_kmalloc+0xbb/0xc0
[   66.777658]  __kmalloc_cache_noprof+0x1c8/0x4b0
[   66.777661]  dm_dp_add_mst_connector+0xdd/0x5c0 [amdgpu]
[   66.777880]  drm_dp_mst_port_add_connector+0x47e/0x770 [drm_display_helper]
[   66.777892]  drm_dp_send_link_address+0x1554/0x2bf0 [drm_display_helper]
[   66.777901]  drm_dp_check_and_send_link_address+0x187/0x1f0 [drm_display_helper]
[   66.777909]  drm_dp_mst_link_probe_work+0x2b8/0x410 [drm_display_helper]
[   66.777917]  process_one_work+0x86b/0x1510
[   66.777919]  worker_thread+0x5c0/0xfa0
[   66.777922]  kthread+0x3a2/0x840
[   66.777925]  ret_from_fork+0x40/0x90
[   66.777927]  ret_from_fork_asm+0x11/0x20

[   66.777932] Freed by task 1713:
[   66.777935]  kasan_save_stack+0x39/0x60
[   66.777938]  kasan_save_track+0x14/0x40
[   66.777940]  kasan_save_free_info+0x3b/0x60
[   66.777944]  __kasan_slab_free+0x52/0x70
[   66.777946]  kfree+0x13f/0x4b0
[   66.777949]  dm_dp_mst_connector_destroy+0xfa/0x150 [amdgpu]
[   66.778179]  drm_connector_free+0x7d/0xb0
[   66.778184]  drm_mode_object_put.part.0+0xee/0x160
[   66.778188]  drm_mode_object_put+0x37/0x50
[   66.778191]  drm_atomic_state_default_clear+0x220/0xd60
[   66.778194]  __drm_atomic_state_free+0x16e/0x2a0
[   66.778197]  drm_mode_atomic_ioctl+0x15ed/0x2ba0
[   66.778200]  drm_ioctl_kernel+0x17a/0x310
[   66.778203]  drm_ioctl+0x584/0xd10
[   66.778206]  amdgpu_drm_ioctl+0xd2/0x1c0 [amdgpu]
[   66.778375]  __x64_sys_ioctl+0x139/0x1a0
[   66.778378]  x64_sys_call+0xee7/0xfb0
[   66.778381]  do_syscall_64+0x87/0x140
[   66.778385]  entry_SYSCALL_64_after_hwframe+0x4b/0x53

Fix this by properly incrementing and decrementing the reference counts
when making and deleting copies of the amdgpu_dm_connector pointers.

(Mario: rebase on current code and update fixes tag)

Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4006
Signed-off-by: Chris Bainbridge <chris.bainbridge@gmail.com>
Fixes: da3fd7ac0bcf3 ("drm/amd/display: Update CP property based on HW query")
Reviewed-by: Alex Hung <alex.hung@amd.com>
Link: https://lore.kernel.org/r/20250417215005.37964-1-mario.limonciello@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit d4673f3c3b3dcb74e36e53cdfc880baa7a87b330)
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../amd/display/amdgpu_dm/amdgpu_dm_hdcp.c    | 19 ++++++++++++++++---
 1 file changed, 16 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_hdcp.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_hdcp.c
index 53796a74b7a65..10ba4d7bf6325 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_hdcp.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_hdcp.c
@@ -173,6 +173,9 @@ void hdcp_update_display(struct hdcp_workqueue *hdcp_work,
 	unsigned int conn_index = aconnector->base.index;
 
 	guard(mutex)(&hdcp_w->mutex);
+	drm_connector_get(&aconnector->base);
+	if (hdcp_w->aconnector[conn_index])
+		drm_connector_put(&hdcp_w->aconnector[conn_index]->base);
 	hdcp_w->aconnector[conn_index] = aconnector;
 
 	memset(&link_adjust, 0, sizeof(link_adjust));
@@ -220,7 +223,6 @@ static void hdcp_remove_display(struct hdcp_workqueue *hdcp_work,
 	unsigned int conn_index = aconnector->base.index;
 
 	guard(mutex)(&hdcp_w->mutex);
-	hdcp_w->aconnector[conn_index] = aconnector;
 
 	/* the removal of display will invoke auth reset -> hdcp destroy and
 	 * we'd expect the Content Protection (CP) property changed back to
@@ -236,7 +238,10 @@ static void hdcp_remove_display(struct hdcp_workqueue *hdcp_work,
 	}
 
 	mod_hdcp_remove_display(&hdcp_w->hdcp, aconnector->base.index, &hdcp_w->output);
-
+	if (hdcp_w->aconnector[conn_index]) {
+		drm_connector_put(&hdcp_w->aconnector[conn_index]->base);
+		hdcp_w->aconnector[conn_index] = NULL;
+	}
 	process_output(hdcp_w);
 }
 
@@ -254,6 +259,10 @@ void hdcp_reset_display(struct hdcp_workqueue *hdcp_work, unsigned int link_inde
 	for (conn_index = 0; conn_index < AMDGPU_DM_MAX_DISPLAY_INDEX; conn_index++) {
 		hdcp_w->encryption_status[conn_index] =
 			MOD_HDCP_ENCRYPTION_STATUS_HDCP_OFF;
+		if (hdcp_w->aconnector[conn_index]) {
+			drm_connector_put(&hdcp_w->aconnector[conn_index]->base);
+			hdcp_w->aconnector[conn_index] = NULL;
+		}
 	}
 
 	process_output(hdcp_w);
@@ -489,6 +498,7 @@ static void update_config(void *handle, struct cp_psp_stream_config *config)
 	struct hdcp_workqueue *hdcp_work = handle;
 	struct amdgpu_dm_connector *aconnector = config->dm_stream_ctx;
 	int link_index = aconnector->dc_link->link_index;
+	unsigned int conn_index = aconnector->base.index;
 	struct mod_hdcp_display *display = &hdcp_work[link_index].display;
 	struct mod_hdcp_link *link = &hdcp_work[link_index].link;
 	struct hdcp_workqueue *hdcp_w = &hdcp_work[link_index];
@@ -545,7 +555,10 @@ static void update_config(void *handle, struct cp_psp_stream_config *config)
 	guard(mutex)(&hdcp_w->mutex);
 
 	mod_hdcp_add_display(&hdcp_w->hdcp, link, display, &hdcp_w->output);
-
+	drm_connector_get(&aconnector->base);
+	if (hdcp_w->aconnector[conn_index])
+		drm_connector_put(&hdcp_w->aconnector[conn_index]->base);
+	hdcp_w->aconnector[conn_index] = aconnector;
 	process_output(hdcp_w);
 }
 
-- 
2.39.5

[PATCH 6.14 183/183] bcachefs: Change btree_insert_node() assertion to error

[Greg Kroah-Hartman]

6.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Kent Overstreet <kent.overstreet@linux.dev>

commit 63c3b8f616cc95bb1fcc6101c92485d41c535d7c upstream.

Debug for https://github.com/koverstreet/bcachefs/issues/843

Print useful debug info and go emergency read-only.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/bcachefs/btree_update_interior.c |   17 ++++++++++++++++-
 fs/bcachefs/error.c                 |    8 ++++++++
 fs/bcachefs/error.h                 |    2 ++
 3 files changed, 26 insertions(+), 1 deletion(-)

--- a/fs/bcachefs/btree_update_interior.c
+++ b/fs/bcachefs/btree_update_interior.c
@@ -35,6 +35,8 @@ static const char * const bch2_btree_upd
 	NULL
 };
 
+static void bch2_btree_update_to_text(struct printbuf *, struct btree_update *);
+
 static int bch2_btree_insert_node(struct btree_update *, struct btree_trans *,
 				  btree_path_idx_t, struct btree *, struct keylist *);
 static void bch2_btree_update_add_new_node(struct btree_update *, struct btree *);
@@ -1782,11 +1784,24 @@ static int bch2_btree_insert_node(struct
 	int ret;
 
 	lockdep_assert_held(&c->gc_lock);
-	BUG_ON(!btree_node_intent_locked(path, b->c.level));
 	BUG_ON(!b->c.level);
 	BUG_ON(!as || as->b);
 	bch2_verify_keylist_sorted(keys);
 
+	if (!btree_node_intent_locked(path, b->c.level)) {
+		struct printbuf buf = PRINTBUF;
+		bch2_log_msg_start(c, &buf);
+		prt_printf(&buf, "%s(): node not locked at level %u\n",
+			   __func__, b->c.level);
+		bch2_btree_update_to_text(&buf, as);
+		bch2_btree_path_to_text(&buf, trans, path_idx);
+
+		bch2_print_string_as_lines(KERN_ERR, buf.buf);
+		printbuf_exit(&buf);
+		bch2_fs_emergency_read_only(c);
+		return -EIO;
+	}
+
 	ret = bch2_btree_node_lock_write(trans, path, &b->c);
 	if (ret)
 		return ret;
--- a/fs/bcachefs/error.c
+++ b/fs/bcachefs/error.c
@@ -11,6 +11,14 @@
 
 #define FSCK_ERR_RATELIMIT_NR	10
 
+void bch2_log_msg_start(struct bch_fs *c, struct printbuf *out)
+{
+#ifdef BCACHEFS_LOG_PREFIX
+	prt_printf(out, bch2_log_msg(c, ""));
+#endif
+	printbuf_indent_add(out, 2);
+}
+
 bool bch2_inconsistent_error(struct bch_fs *c)
 {
 	set_bit(BCH_FS_error, &c->flags);
--- a/fs/bcachefs/error.h
+++ b/fs/bcachefs/error.h
@@ -18,6 +18,8 @@ struct work_struct;
 
 /* Error messages: */
 
+void bch2_log_msg_start(struct bch_fs *, struct printbuf *);
+
 /*
  * Inconsistency errors: The on disk data is inconsistent. If these occur during
  * initial recovery, they don't indicate a bug in the running code - we walk all

Re: [PATCH 6.14 030/183] dm: always update the array size in realloc_argv on success

[Mikulas Patocka]

Hi

I'd like to ask you to also backport 
f1aff4bc199cb92c055668caed65505e3b4d2656 ("dm: fix copying after src array 
boundaries") to all stable branches because it fixes a bug introduced in 
the commit 5a2a6c428190f945c5cbf5791f72dbea83e97f66.

Mikulas



On Wed, 7 May 2025, Greg Kroah-Hartman wrote:

> 6.14-stable review patch.  If anyone has any objections, please let me know.
> 
> ------------------
> 
> From: Benjamin Marzinski <bmarzins@redhat.com>
> 
> commit 5a2a6c428190f945c5cbf5791f72dbea83e97f66 upstream.
> 
> realloc_argv() was only updating the array size if it was called with
> old_argv already allocated. The first time it was called to create an
> argv array, it would allocate the array but return the array size as
> zero. dm_split_args() would think that it couldn't store any arguments
> in the array and would call realloc_argv() again, causing it to
> reallocate the initial slots (this time using GPF_KERNEL) and finally
> return a size. Aside from being wasteful, this could cause deadlocks on
> targets that need to process messages without starting new IO. Instead,
> realloc_argv should always update the allocated array size on success.
> 
> Fixes: a0651926553c ("dm table: don't copy from a NULL pointer in realloc_argv()")
> Cc: stable@vger.kernel.org
> Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> ---
>  drivers/md/dm-table.c |    5 +++--
>  1 file changed, 3 insertions(+), 2 deletions(-)
> 
> --- a/drivers/md/dm-table.c
> +++ b/drivers/md/dm-table.c
> @@ -523,9 +523,10 @@ static char **realloc_argv(unsigned int
>  		gfp = GFP_NOIO;
>  	}
>  	argv = kmalloc_array(new_size, sizeof(*argv), gfp);
> -	if (argv && old_argv) {
> -		memcpy(argv, old_argv, *size * sizeof(*argv));
> +	if (argv) {
>  		*size = new_size;
> +		if (old_argv)
> +			memcpy(argv, old_argv, *size * sizeof(*argv));
>  	}
>  
>  	kfree(old_argv);
> 
> 

Re: [PATCH 6.14 000/183] 6.14.6-rc1 review

[Ronald Warsow]

Hi Greg

no regressions here on x86_64 (RKL, Intel 11th Gen. CPU)

Thanks

Tested-by: Ronald Warsow <rwarsow@gmx.de>

Re: [PATCH 6.14 000/183] 6.14.6-rc1 review

[Justin Forbes]

On Wed, May 07, 2025 at 08:37:25PM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 6.14.6 release.
> There are 183 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Fri, 09 May 2025 18:37:41 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.14.6-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.14.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h

Tested rc1 against the Fedora build system (aarch64, ppc64le, s390x,
x86_64), and boot tested x86_64. No regressions noted.

Tested-by: Justin M. Forbes <jforbes@fedoraproject.org>

Re: [PATCH 6.14 030/183] dm: always update the array size in realloc_argv on success

[Greg Kroah-Hartman]

On Wed, May 07, 2025 at 10:34:32PM +0200, Mikulas Patocka wrote:
> Hi
> 
> I'd like to ask you to also backport 
> f1aff4bc199cb92c055668caed65505e3b4d2656 ("dm: fix copying after src array 
> boundaries") to all stable branches because it fixes a bug introduced in 
> the commit 5a2a6c428190f945c5cbf5791f72dbea83e97f66.

Now added.  Sorry we had not caught that, but as it's not in a -rc
release yet, our tools don't know to look for it.

thanks,

greg k-h

Re: [PATCH 6.14 000/183] 6.14.6-rc1 review

[Naresh Kamboju]

On Thu, 8 May 2025 at 00:20, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 6.14.6 release.
> There are 183 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Fri, 09 May 2025 18:37:41 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
>         https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.14.6-rc1.gz
> or in the git tree and branch at:
>         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.14.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h


Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.

Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>

## Build
* kernel: 6.14.6-rc1
* git: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
* git commit: a33747967783a6e6a8ab7c22905712408f5b8eef
* git describe: v6.14.5-184-ga33747967783
* test details:
https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-6.14.y/build/v6.14.5-184-ga33747967783

## Test Regressions (compared to v6.14.3-550-g25b40e24731f)

## Metric Regressions (compared to v6.14.3-550-g25b40e24731f)

## Test Fixes (compared to v6.14.3-550-g25b40e24731f)

## Metric Fixes (compared to v6.14.3-550-g25b40e24731f)

## Test result summary
total: 138622, pass: 114363, fail: 5571, skip: 18324, xfail: 364

## Build Summary
* arc: 5 total, 5 passed, 0 failed
* arm: 139 total, 137 passed, 2 failed
* arm64: 56 total, 55 passed, 1 failed
* i386: 18 total, 16 passed, 2 failed
* mips: 34 total, 33 passed, 1 failed
* parisc: 4 total, 4 passed, 0 failed
* powerpc: 40 total, 40 passed, 0 failed
* riscv: 25 total, 22 passed, 3 failed
* s390: 22 total, 22 passed, 0 failed
* sh: 5 total, 5 passed, 0 failed
* sparc: 4 total, 3 passed, 1 failed
* x86_64: 49 total, 42 passed, 7 failed

## Test suites summary
* boot
* commands
* kselftest-arm64
* kselftest-breakpoints
* kselftest-capabilities
* kselftest-cgroup
* kselftest-clone3
* kselftest-core
* kselftest-cpu-hotplug
* kselftest-cpufreq
* kselftest-efivarfs
* kselftest-exec
* kselftest-fpu
* kselftest-ftrace
* kselftest-futex
* kselftest-gpio
* kselftest-intel_pstate
* kselftest-ipc
* kselftest-kcmp
* kselftest-kvm
* kselftest-livepatch
* kselftest-membarrier
* kselftest-memfd
* kselftest-mincore
* kselftest-mqueue
* kselftest-net
* kselftest-net-mptcp
* kselftest-openat2
* kselftest-ptrace
* kselftest-rseq
* kselftest-rtc
* kselftest-rust
* kselftest-seccomp
* kselftest-sigaltstack
* kselftest-size
* kselftest-tc-testing
* kselftest-timers
* kselftest-tmpfs
* kselftest-tpm2
* kselftest-user_events
* kselftest-vDSO
* kselftest-x86
* kunit
* kvm-unit-tests
* lava
* libgpiod
* libhugetlbfs
* log-parser-boot
* log-parser-build-clang
* log-parser-build-gcc
* log-parser-test
* ltp-capability
* ltp-commands
* ltp-containers
* ltp-controllers
* ltp-cpuhotplug
* ltp-crypto
* ltp-cve
* ltp-dio
* ltp-fcntl-locktests
* ltp-fs
* ltp-fs_bind
* ltp-fs_perms_simple
* ltp-hugetlb
* ltp-ipc
* ltp-math
* ltp-mm
* ltp-nptl
* ltp-pty
* ltp-sched
* ltp-smoke
* ltp-syscalls
* ltp-tracing
* perf
* rcutorture
* rt-tests-cyclicdeadline
* rt-tests-pi-stress
* rt-tests-pmqtest
* rt-tests-rt-migrate-test
* rt-tests-signaltest

--
Linaro LKFT
https://lkft.linaro.org

Re: [PATCH 6.14 000/183] 6.14.6-rc1 review

[Luna Jernberg]

Tested-by: Luna Jernberg <droidbittin@gmail.com>

AMD Ryzen 5 5600 6-Core Processor:
https://www.inet.se/produkt/5304697/amd-ryzen-5-5600-3-5-ghz-35mb on a
https://www.gigabyte.com/Motherboard/B550-AORUS-ELITE-V2-rev-12
https://www.inet.se/produkt/1903406/gigabyte-b550-aorus-elite-v2
motherboard :)

running Arch Linux with the testing repos enabled:
https://archlinux.org/ https://archboot.com/
https://wiki.archlinux.org/title/Arch_Testing_Team

Den ons 7 maj 2025 kl 20:50 skrev Greg Kroah-Hartman
<gregkh@linuxfoundation.org>:
>
> This is the start of the stable review cycle for the 6.14.6 release.
> There are 183 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Fri, 09 May 2025 18:37:41 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
>         https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.14.6-rc1.gz
> or in the git tree and branch at:
>         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.14.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>
> -------------
> Pseudo-Shortlog of commits:
>
> Greg Kroah-Hartman <gregkh@linuxfoundation.org>
>     Linux 6.14.6-rc1
>
> Kent Overstreet <kent.overstreet@linux.dev>
>     bcachefs: Change btree_insert_node() assertion to error
>
> Chris Bainbridge <chris.bainbridge@gmail.com>
>     drm/amd/display: Fix slab-use-after-free in hdcp
>
> Mario Limonciello <mario.limonciello@amd.com>
>     drm/amd/display: Add scoped mutexes for amdgpu_dm_dhcp
>
> Penglei Jiang <superman.xpt@gmail.com>
>     btrfs: fix the inode leak in btrfs_iget()
>
> David Sterba <dsterba@suse.com>
>     btrfs: pass struct btrfs_inode to btrfs_iget_locked()
>
> David Sterba <dsterba@suse.com>
>     btrfs: pass struct btrfs_inode to btrfs_read_locked_inode()
>
> Qu Wenruo <wqu@suse.com>
>     btrfs: expose per-inode stable writes flag
>
> Shyam Saini <shyamsaini@linux.microsoft.com>
>     drivers: base: handle module_kobject creation
>
> Shyam Saini <shyamsaini@linux.microsoft.com>
>     kernel: globalize lookup_or_create_module_kobject()
>
> Shyam Saini <shyamsaini@linux.microsoft.com>
>     kernel: param: rename locate_module_kobject
>
> Naohiro Aota <naohiro.aota@wdc.com>
>     btrfs: zoned: skip reporting zone for new block group
>
> Naohiro Aota <naohiro.aota@wdc.com>
>     block: introduce zone capacity helper
>
> Christian Bruel <christian.bruel@foss.st.com>
>     arm64: dts: st: Use 128kB size for aliased GIC400 register access on stm32mp25 SoCs
>
> Christian Bruel <christian.bruel@foss.st.com>
>     arm64: dts: st: Adjust interrupt-controller for stm32mp25 SoCs
>
> Sébastien Szymanski <sebastien.szymanski@armadeus.com>
>     ARM: dts: opos6ul: add ksz8081 phy properties
>
> Richard Zhu <hongxing.zhu@nxp.com>
>     arm64: dts: imx95: Correct the range of PCIe app-reg region
>
> Sudeep Holla <sudeep.holla@arm.com>
>     firmware: arm_ffa: Skip Rx buffer ownership release if not acquired
>
> Cristian Marussi <cristian.marussi@arm.com>
>     firmware: arm_scmi: Balance device refcount when destroying devices
>
> Cong Wang <xiyou.wangcong@gmail.com>
>     sch_ets: make est_qlen_notify() idempotent
>
> Cong Wang <xiyou.wangcong@gmail.com>
>     sch_qfq: make qfq_qlen_notify() idempotent
>
> Cong Wang <xiyou.wangcong@gmail.com>
>     sch_hfsc: make hfsc_qlen_notify() idempotent
>
> Cong Wang <xiyou.wangcong@gmail.com>
>     sch_drr: make drr_qlen_notify() idempotent
>
> Cong Wang <xiyou.wangcong@gmail.com>
>     sch_htb: make htb_qlen_notify() idempotent
>
> Ming Lei <ming.lei@redhat.com>
>     ublk: fix race between io_uring_cmd_complete_in_task and ublk_cancel_cmd
>
> Ming Lei <ming.lei@redhat.com>
>     ublk: simplify aborting ublk request
>
> Ming Lei <ming.lei@redhat.com>
>     ublk: remove __ublk_quiesce_dev()
>
> Uday Shankar <ushankar@purestorage.com>
>     ublk: improve detection and handling of ublk server exit
>
> Ming Lei <ming.lei@redhat.com>
>     ublk: move device reset into ublk_ch_release()
>
> Uday Shankar <ushankar@purestorage.com>
>     ublk: properly serialize all FETCH_REQs
>
> Ming Lei <ming.lei@redhat.com>
>     ublk: add helper of ublk_need_map_io()
>
> Kurt Borja <kuurtb@gmail.com>
>     platform/x86: alienware-wmi-wmax: Add support for Alienware m15 R7
>
> Kenneth Graunke <kenneth@whitecape.org>
>     drm/xe: Invalidate L3 read-only cachelines for geometry streams too
>
> Karol Wachowski <karol.wachowski@intel.com>
>     accel/ivpu: Add handling of VPU_JSM_STATUS_MVNCI_CONTEXT_VIOLATION_HW
>
> Karol Wachowski <karol.wachowski@intel.com>
>     accel/ivpu: Fix locking order in ivpu_job_submit
>
> Karol Wachowski <karol.wachowski@intel.com>
>     accel/ivpu: Abort all jobs after command queue unregister
>
> Zhenhua Huang <quic_zhenhuah@quicinc.com>
>     mm, slab: clean up slab->obj_exts always
>
> Stefan Wahren <wahrenst@gmx.net>
>     net: vertexcom: mse102x: Fix RX error handling
>
> Stefan Wahren <wahrenst@gmx.net>
>     net: vertexcom: mse102x: Add range check for CMD_RTS
>
> Stefan Wahren <wahrenst@gmx.net>
>     net: vertexcom: mse102x: Fix LEN_MASK
>
> Stefan Wahren <wahrenst@gmx.net>
>     net: vertexcom: mse102x: Fix possible stuck of SPI interrupt
>
> Jian Shen <shenjian15@huawei.com>
>     net: hns3: defer calling ptp_clock_register()
>
> Hao Lan <lanhao@huawei.com>
>     net: hns3: fixed debugfs tm_qset size
>
> Yonglong Liu <liuyonglong@huawei.com>
>     net: hns3: fix an interrupt residual problem
>
> Jian Shen <shenjian15@huawei.com>
>     net: hns3: store rx VLAN tag offload state for VF
>
> Sathesh B Edara <sedara@marvell.com>
>     octeon_ep: Fix host hang issue during device reboot
>
> Mattias Barthel <mattias.barthel@atlascopco.com>
>     net: fec: ERR007885 Workaround for conventional TX
>
> Thangaraj Samynathan <thangaraj.s@microchip.com>
>     net: lan743x: Fix memleak issue when GSO enabled
>
> Sagi Maimon <sagi.maimon@adtran.com>
>     ptp: ocp: Fix NULL dereference in Adva board SMA sysfs operations
>
> Jibin Zhang <jibin.zhang@mediatek.com>
>     net: use sock_gen_put() when sk_state is TCP_TIME_WAIT
>
> Vadim Fedorenko <vadim.fedorenko@linux.dev>
>     bnxt_en: fix module unload sequence
>
> Alexander Stein <alexander.stein@ew.tq-group.com>
>     ASoC: simple-card-utils: Fix pointer check in graph_util_parse_link_direction
>
> Olivier Moysan <olivier.moysan@foss.st.com>
>     ASoC: stm32: sai: add a check on minimal kernel frequency
>
> Olivier Moysan <olivier.moysan@foss.st.com>
>     ASoC: stm32: sai: skip useless iterations on kernel rate loop
>
> Alistair Francis <alistair.francis@wdc.com>
>     nvmet-tcp: select CONFIG_TLS from CONFIG_NVME_TARGET_TCP_TLS
>
> Alistair Francis <alistair23@gmail.com>
>     nvme-tcp: select CONFIG_TLS from CONFIG_NVME_TCP_TLS
>
> Michael Liang <mliang@purestorage.com>
>     nvme-tcp: fix premature queue removal and I/O failover
>
> Michael Chan <michael.chan@broadcom.com>
>     bnxt_en: Fix ethtool -d byte order for 32-bit values
>
> Shruti Parab <shruti.parab@broadcom.com>
>     bnxt_en: Fix out-of-bound memcpy() during ethtool -w
>
> Shruti Parab <shruti.parab@broadcom.com>
>     bnxt_en: Fix coredump logic to free allocated buffer
>
> Kashyap Desai <kashyap.desai@broadcom.com>
>     bnxt_en: call pci_alloc_irq_vectors() after bnxt_reserve_rings()
>
> Somnath Kotur <somnath.kotur@broadcom.com>
>     bnxt_en: Add missing skb_mark_for_recycle() in bnxt_rx_vlan()
>
> Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
>     bnxt_en: Fix ethtool selftest output in one of the failure cases
>
> Shravya KN <shravya.k-n@broadcom.com>
>     bnxt_en: Fix error handling path in bnxt_init_chip()
>
> Takashi Iwai <tiwai@suse.de>
>     ALSA: hda/realtek: Fix built-mic regression on other ASUS models
>
> Felix Fietkau <nbd@nbd.name>
>     net: ipv6: fix UDPv6 GSO segmentation with NAT
>
> Vladimir Oltean <vladimir.oltean@nxp.com>
>     net: dsa: felix: fix broken taprio gate states after clock jump
>
> Chad Monroe <chad@monroe.io>
>     net: ethernet: mtk_eth_soc: fix SER panic with 4GB+ RAM
>
> Jacob Keller <jacob.e.keller@intel.com>
>     igc: fix lock order in igc_ptp_reset
>
> Larysa Zaremba <larysa.zaremba@intel.com>
>     idpf: protect shutdown from reset
>
> Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
>     idpf: fix potential memory leak on kcalloc() failure
>
> Da Xue <da@libre.computer>
>     net: mdio: mux-meson-gxl: set reversed bit when using internal phy
>
> Simon Horman <horms@kernel.org>
>     net: dlink: Correct endianness handling of led_mode
>
> Russell Cloran <rcloran@gmail.com>
>     drm/mipi-dbi: Fix blanking for non-16 bit formats
>
> Maxime Ripard <mripard@kernel.org>
>     drm/tests: shmem: Fix memleak
>
> Keith Busch <kbusch@kernel.org>
>     nvme-pci: fix queue unquiesce check on slot_reset
>
> Takashi Iwai <tiwai@suse.de>
>     ALSA: ump: Fix buffer overflow at UMP SysEx message conversion
>
> Maulik Shah <maulik.shah@oss.qualcomm.com>
>     pinctrl: qcom: Fix PINGROUP definition for sm8750
>
> John Harrison <John.C.Harrison@Intel.com>
>     drm/xe/guc: Fix capture of steering registers
>
> Keoseong Park <keosung.park@samsung.com>
>     scsi: ufs: core: Remove redundant query_complete trace
>
> Madhu Chittim <madhu.chittim@intel.com>
>     idpf: fix offloads support for encapsulated packets
>
> Xuanqiang Luo <luoxuanqiang@kylinos.cn>
>     ice: Check VF VSI Pointer Value in ice_vc_add_fdir_fltr()
>
> Paul Greenwalt <paul.greenwalt@intel.com>
>     ice: fix Get Tx Topology AQ command error on E830
>
> Karol Kolacinski <karol.kolacinski@intel.com>
>     ice: Remove unnecessary ice_is_e8xx() functions
>
> Karol Kolacinski <karol.kolacinski@intel.com>
>     ice: Don't check device type when checking GNSS presence
>
> Victor Nogueira <victor@mojatatu.com>
>     net_sched: qfq: Fix double list add in class with netem as child qdisc
>
> Victor Nogueira <victor@mojatatu.com>
>     net_sched: ets: Fix double list add in class with netem as child qdisc
>
> Victor Nogueira <victor@mojatatu.com>
>     net_sched: hfsc: Fix a UAF vulnerability in class with netem as child qdisc
>
> Victor Nogueira <victor@mojatatu.com>
>     net_sched: drr: Fix double list add in class with netem as child qdisc
>
> Shannon Nelson <shannon.nelson@amd.com>
>     pds_core: remove write-after-free of client_id
>
> Shannon Nelson <shannon.nelson@amd.com>
>     pds_core: specify auxiliary_device to be created
>
> Shannon Nelson <shannon.nelson@amd.com>
>     pds_core: make pdsc_auxbus_dev_del() void
>
> Daniel Golle <daniel@makrotopia.org>
>     net: ethernet: mtk_eth_soc: sync mtk_clks_source_name array
>
> Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
>     net: ethernet: mtk-star-emac: rearm interrupts in rx_poll only when advised
>
> Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
>     net: ethernet: mtk-star-emac: fix spinlock recursion issues on rx/tx poll
>
> Justin Lai <justinlai0215@realtek.com>
>     rtase: Modify the condition used to detect overflow in rtase_calc_time_mitigation
>
> Vadim Fedorenko <vadim.fedorenko@linux.dev>
>     bnxt_en: improve TX timestamping FIFO configuration
>
> Sathesh B Edara <sedara@marvell.com>
>     octeon_ep_vf: Resolve netdevice usage count issue
>
> Vladimir Oltean <vladimir.oltean@nxp.com>
>     net: mscc: ocelot: delete PVID VLAN when readding it as non-PVID
>
> Pauli Virtanen <pav@iki.fi>
>     Bluetooth: L2CAP: copy RX timestamp to new fragments
>
> Kiran K <kiran.k@intel.com>
>     Bluetooth: btintel_pcie: Add additional to checks to clear TX/RX paths
>
> En-Wei Wu <en-wei.wu@canonical.com>
>     Bluetooth: btusb: avoid NULL pointer dereference in skb_dequeue()
>
> Kiran K <kiran.k@intel.com>
>     Bluetooth: btintel_pcie: Avoid redundant buffer allocation
>
> Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
>     Bluetooth: hci_conn: Fix not setting timeout for BIG Create Sync
>
> Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
>     Bluetooth: hci_conn: Fix not setting conn_timeout for Broadcast Receiver
>
> Viresh Kumar <viresh.kumar@linaro.org>
>     cpufreq: ACPI: Re-sync CPU boost state on system resume
>
> Viresh Kumar <viresh.kumar@linaro.org>
>     cpufreq: acpi: Set policy->boost_supported
>
> Viresh Kumar <viresh.kumar@linaro.org>
>     cpufreq: Introduce policy->boost_supported flag
>
> Venkata Prasad Potturu <venkataprasad.potturu@amd.com>
>     ASoC: amd: acp: Fix NULL pointer deref in acp_i2s_set_tdm_slot
>
> Raju Rangoju <Raju.Rangoju@amd.com>
>     spi: spi-mem: Add fix to avoid divide error
>
> Karol Wachowski <karol.wachowski@intel.com>
>     accel/ivpu: Correct DCT interrupt handling
>
> Chris Mi <cmi@nvidia.com>
>     net/mlx5: E-switch, Fix error handling for enabling roce
>
> Cosmin Ratiu <cratiu@nvidia.com>
>     net/mlx5e: Fix lock order in mlx5e_tx_reporter_ptpsq_unhealthy_recover
>
> Jianbo Liu <jianbol@nvidia.com>
>     net/mlx5e: TC, Continue the attr process even if encap entry is invalid
>
> Maor Gottlieb <maorg@nvidia.com>
>     net/mlx5: E-Switch, Initialize MAC Address for Default GID
>
> Vlad Dogaru <vdogaru@nvidia.com>
>     net/mlx5e: Use custom tunnel header for vxlan gbp
>
> e.kubanski <e.kubanski@partner.samsung.com>
>     xsk: Fix offset calculation in unaligned mode
>
> e.kubanski <e.kubanski@partner.samsung.com>
>     xsk: Fix race condition in AF_XDP generic RX path
>
> Ido Schimmel <idosch@nvidia.com>
>     vxlan: vnifilter: Fix unlocked deletion of default FDB entry
>
> Madhavan Srinivasan <maddy@linux.ibm.com>
>     powerpc/boot: Fix dash warning
>
> Murad Masimov <m.masimov@mt-integration.ru>
>     wifi: plfxlc: Remove erroneous assert in plfxlc_mac_release
>
> Emmanuel Grumbach <emmanuel.grumbach@intel.com>
>     wifi: iwlwifi: fix the check for the SCRATCH register upon resume
>
> Emmanuel Grumbach <emmanuel.grumbach@intel.com>
>     wifi: iwlwifi: don't warn if the NIC is gone in resume
>
> Johannes Berg <johannes.berg@intel.com>
>     wifi: iwlwifi: back off on continuous errors
>
> Chen Linxuan <chenlinxuan@uniontech.com>
>     drm/i915/pxp: fix undefined reference to `intel_pxp_gsccs_is_ready_for_sessions'
>
> Kailang Yang <kailang@realtek.com>
>     ALSA: hda/realtek - Enable speaker for HP platform
>
> Aneesh Kumar K.V (Arm) <aneesh.kumar@kernel.org>
>     iommu/arm-smmu-v3: Add missing S2FWB feature detection
>
> Chenyuan Yang <chenyuan0y@gmail.com>
>     ASoC: Intel: sof_sdw: Add NULL check in asoc_sdw_rt_dmic_rtd_init()
>
> Madhavan Srinivasan <maddy@linux.ibm.com>
>     powerpc/boot: Check for ld-option support
>
> Hui Wang <hui.wang@canonical.com>
>     pinctrl: imx: Return NULL if no group is matched and found
>
> Anthony Iliopoulos <ailiop@suse.com>
>     powerpc64/ftrace: fix module loading without patchable function entries
>
> Donet Tom <donettom@linux.ibm.com>
>     book3s64/radix : Align section vmemmap start address to PAGE_SIZE
>
> Sheetal <sheetal@nvidia.com>
>     ASoC: soc-pcm: Fix hw_params() and DAPM widget sequence
>
> Nico Pache <npache@redhat.com>
>     firmware: cs_dsp: tests: Depend on FW_CS_DSP rather then enabling it
>
> Richard Fitzgerald <rf@opensource.cirrus.com>
>     ASoC: cs-amp-lib-test: Don't select SND_SOC_CS_AMP_LIB
>
> Geert Uytterhoeven <geert+renesas@glider.be>
>     ASoC: soc-core: Stop using of_property_read_bool() for non-boolean properties
>
> Leo Li <sunpeng.li@amd.com>
>     drm/amd/display: Default IPS to RCG_IN_ACTIVE_IPS2_IN_OFF
>
> Alan Huang <mmpgouride@gmail.com>
>     bcachefs: Remove incorrect __counted_by annotation
>
> Jeongjun Park <aha310510@gmail.com>
>     tracing: Fix oob write in trace_seq_to_buffer()
>
> Rafael J. Wysocki <rafael.j.wysocki@intel.com>
>     cpufreq: Fix setting policy limits when frequency tables are used
>
> Rafael J. Wysocki <rafael.j.wysocki@intel.com>
>     cpufreq: Avoid using inconsistent policy->min and policy->max
>
> Jethro Donaldson <devel@jro.nz>
>     smb: client: fix zero length for mkdir POSIX create context
>
> Sean Heelan <seanheelan@gmail.com>
>     ksmbd: fix use-after-free in session logoff
>
> Sean Heelan <seanheelan@gmail.com>
>     ksmbd: fix use-after-free in kerberos authentication
>
> Namjae Jeon <linkinjeon@kernel.org>
>     ksmbd: fix use-after-free in ksmbd_session_rpc_open
>
> Shouye Liu <shouyeliu@tencent.com>
>     platform/x86/intel-uncore-freq: Fix missing uncore sysfs during CPU hotplug
>
> Mario Limonciello <mario.limonciello@amd.com>
>     platform/x86/amd: pmc: Require at least 2.5 seconds between HW sleep cycles
>
> Nicolin Chen <nicolinc@nvidia.com>
>     iommu: Fix two issues in iommu_copy_struct_from_user()
>
> Mingcong Bai <jeffbai@aosc.io>
>     iommu/vt-d: Apply quirk_iommu_igfx for 8086:0044 (QM57/QS57)
>
> Balbir Singh <balbirs@nvidia.com>
>     iommu/arm-smmu-v3: Fix pgsize_bit for sva domains
>
> Nicolin Chen <nicolinc@nvidia.com>
>     iommu/arm-smmu-v3: Fix iommu_device_probe bug due to duplicated stream ids
>
> Pavel Paklov <Pavel.Paklov@cyberprotect.ru>
>     iommu/amd: Fix potential buffer overflow in parse_ivrs_acpihid
>
> Janne Grunau <j@jannau.net>
>     drm: Select DRM_KMS_HELPER from DRM_DEBUG_DP_MST_TOPOLOGY_REFS
>
> Lijo Lazar <lijo.lazar@amd.com>
>     drm/amdgpu: Fix offset for HDP remap in nbio v7.11
>
> Benjamin Marzinski <bmarzins@redhat.com>
>     dm: always update the array size in realloc_argv on success
>
> Mikulas Patocka <mpatocka@redhat.com>
>     dm-integrity: fix a warning on invalid table line
>
> LongPing Wei <weilongping@oppo.com>
>     dm-bufio: don't schedule in atomic context
>
> Ard Biesheuvel <ardb@kernel.org>
>     x86/boot/sev: Support memory acceptance in the EFI stub under SVSM
>
> Wentao Liang <vulab@iscas.ac.cn>
>     wifi: brcm80211: fmac: Add error handling for brcmf_usb_dl_writeimage()
>
> Steven Rostedt <rostedt@goodmis.org>
>     tracing: Do not take trace_event_sem in print_event_fields()
>
> Aaron Kling <webgeek1234@gmail.com>
>     spi: tegra114: Don't fail set_cs_timing when delays are zero
>
> Ruslan Piasetskyi <ruslan.piasetskyi@gmail.com>
>     mmc: renesas_sdhi: Fix error handling in renesas_sdhi_probe
>
> Wei Yang <richard.weiyang@gmail.com>
>     mm/memblock: repeat setting reserved region nid if array is doubled
>
> Wei Yang <richard.weiyang@gmail.com>
>     mm/memblock: pass size instead of end to memblock_set_node()
>
> Stephan Gerhold <stephan.gerhold@linaro.org>
>     irqchip/qcom-mpm: Prevent crash when trying to handle non-wake GPIOs
>
> Vishal Badole <Vishal.Badole@amd.com>
>     amd-xgbe: Fix to ensure dependent features are toggled with RX checksum offload
>
> Sean Christopherson <seanjc@google.com>
>     perf/x86/intel: KVM: Mask PEBS_ENABLE loaded for guest with vCPU's value.
>
> Kan Liang <kan.liang@linux.intel.com>
>     perf/x86/intel: Only check the group flag for X86 leader
>
> Christian Marangi <ansuelsmth@gmail.com>
>     pinctrl: airoha: fix wrong PHY LED mapping and PHY2 LED defines
>
> Helge Deller <deller@gmx.de>
>     parisc: Fix double SIGFPE crash
>
> Will Deacon <will@kernel.org>
>     arm64: errata: Add missing sentinels to Spectre-BHB MIDR arrays
>
> Clark Wang <xiaoning.wang@nxp.com>
>     i2c: imx-lpi2c: Fix clock count when probe defers
>
> Niravkumar L Rabara <niravkumar.l.rabara@altera.com>
>     EDAC/altera: Set DDR and SDMMC interrupt mask before registration
>
> Niravkumar L Rabara <niravkumar.l.rabara@altera.com>
>     EDAC/altera: Test the correct error reg offset
>
> Philipp Stanner <phasta@kernel.org>
>     drm/nouveau: Fix WARN_ON in nouveau_fence_context_kill()
>
> Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
>     drm/fdinfo: Protect against driver unbind
>
> Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
>     cpufreq: intel_pstate: Unchecked MSR aceess in legacy mode
>
> Dave Chen <davechen@synology.com>
>     btrfs: fix COW handling in run_delalloc_nocow()
>
> Josef Bacik <josef@toxicpanda.com>
>     btrfs: adjust subpage bit start based on sectorsize
>
> Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
>     ASoC: renesas: rz-ssi: Use NOIRQ_SYSTEM_SLEEP_PM_OPS()
>
> Joachim Priesner <joachim.priesner@web.de>
>     ALSA: usb-audio: Add second USB ID for Jabra Evolve 65 headset
>
> Geoffrey D. Bennett <g@b4.vu>
>     ALSA: usb-audio: Add retry on -EPROTO from usb_set_interface()
>
> Chris Chiu <chris.chiu@canonical.com>
>     ALSA: hda/realtek - Add more HP laptops which need mute led fixup
>
> Christian Heusel <christian@heusel.eu>
>     Revert "rndis_host: Flag RNDIS modems as WWAN devices"
>
>
> -------------
>
> Diffstat:
>
>  Makefile                                           |   4 +-
>  .../boot/dts/nxp/imx/imx6ul-imx6ull-opos6ul.dtsi   |   3 +
>  arch/arm64/boot/dts/freescale/imx95.dtsi           |   8 +-
>  arch/arm64/boot/dts/st/stm32mp251.dtsi             |   9 +-
>  arch/arm64/kernel/proton-pack.c                    |   2 +
>  arch/parisc/math-emu/driver.c                      |  16 +-
>  arch/powerpc/boot/wrapper                          |   6 +-
>  arch/powerpc/kernel/module_64.c                    |   4 -
>  arch/powerpc/mm/book3s64/radix_pgtable.c           |  17 +-
>  arch/x86/boot/compressed/mem.c                     |   5 +-
>  arch/x86/boot/compressed/sev.c                     |  40 ++
>  arch/x86/boot/compressed/sev.h                     |   2 +
>  arch/x86/events/core.c                             |   2 +-
>  arch/x86/events/intel/core.c                       |   2 +-
>  arch/x86/events/perf_event.h                       |   9 +-
>  drivers/accel/ivpu/ivpu_drv.c                      |  32 +-
>  drivers/accel/ivpu/ivpu_drv.h                      |   2 +
>  drivers/accel/ivpu/ivpu_hw_btrs.h                  |   2 +-
>  drivers/accel/ivpu/ivpu_job.c                      | 111 ++++-
>  drivers/accel/ivpu/ivpu_job.h                      |   1 +
>  drivers/accel/ivpu/ivpu_mmu.c                      |   3 +-
>  drivers/accel/ivpu/ivpu_pm.c                       |  18 +-
>  drivers/accel/ivpu/ivpu_sysfs.c                    |   5 +-
>  drivers/base/module.c                              |  13 +-
>  drivers/block/ublk_drv.c                           | 552 +++++++++++----------
>  drivers/bluetooth/btintel_pcie.c                   |  57 ++-
>  drivers/bluetooth/btusb.c                          | 101 ++--
>  drivers/cpufreq/acpi-cpufreq.c                     |  14 +
>  drivers/cpufreq/cpufreq.c                          |  42 +-
>  drivers/cpufreq/cpufreq_ondemand.c                 |   3 +-
>  drivers/cpufreq/freq_table.c                       |  10 +-
>  drivers/cpufreq/intel_pstate.c                     |   3 +
>  drivers/edac/altera_edac.c                         |   9 +-
>  drivers/edac/altera_edac.h                         |   2 +
>  drivers/firmware/arm_ffa/driver.c                  |   3 +-
>  drivers/firmware/arm_scmi/bus.c                    |   3 +
>  drivers/firmware/cirrus/Kconfig                    |   5 +-
>  drivers/gpu/drm/Kconfig                            |   2 +-
>  drivers/gpu/drm/amd/amdgpu/nbio_v7_11.c            |   2 +-
>  drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c  |  20 -
>  .../gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_hdcp.c |  56 +--
>  drivers/gpu/drm/drm_file.c                         |   6 +
>  drivers/gpu/drm/drm_mipi_dbi.c                     |   6 +-
>  drivers/gpu/drm/i915/pxp/intel_pxp_gsccs.h         |   8 +-
>  drivers/gpu/drm/nouveau/nouveau_fence.c            |   2 +-
>  drivers/gpu/drm/tests/drm_gem_shmem_test.c         |   3 +
>  drivers/gpu/drm/xe/instructions/xe_gpu_commands.h  |   1 +
>  drivers/gpu/drm/xe/xe_guc_capture.c                |   2 +-
>  drivers/gpu/drm/xe/xe_ring_ops.c                   |  13 +-
>  drivers/i2c/busses/i2c-imx-lpi2c.c                 |   4 +-
>  drivers/iommu/amd/init.c                           |   8 +
>  drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3-sva.c    |   6 +
>  drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c        |  21 +-
>  drivers/iommu/intel/iommu.c                        |   4 +-
>  drivers/irqchip/irq-qcom-mpm.c                     |   3 +
>  drivers/md/dm-bufio.c                              |   9 +-
>  drivers/md/dm-integrity.c                          |   2 +-
>  drivers/md/dm-table.c                              |   5 +-
>  drivers/mmc/host/renesas_sdhi_core.c               |  10 +-
>  drivers/net/dsa/ocelot/felix_vsc9959.c             |   5 +-
>  drivers/net/ethernet/amd/pds_core/auxbus.c         |  39 +-
>  drivers/net/ethernet/amd/pds_core/core.h           |   7 +-
>  drivers/net/ethernet/amd/pds_core/devlink.c        |   7 +-
>  drivers/net/ethernet/amd/pds_core/main.c           |  11 +-
>  drivers/net/ethernet/amd/xgbe/xgbe-desc.c          |   9 +-
>  drivers/net/ethernet/amd/xgbe/xgbe-dev.c           |  24 +-
>  drivers/net/ethernet/amd/xgbe/xgbe-drv.c           |  11 +-
>  drivers/net/ethernet/amd/xgbe/xgbe.h               |   4 +
>  drivers/net/ethernet/broadcom/bnxt/bnxt.c          |  18 +-
>  drivers/net/ethernet/broadcom/bnxt/bnxt_coredump.c |  30 +-
>  drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c  |  38 +-
>  drivers/net/ethernet/broadcom/bnxt/bnxt_ptp.c      |  29 +-
>  drivers/net/ethernet/broadcom/bnxt/bnxt_ptp.h      |   1 +
>  drivers/net/ethernet/dlink/dl2k.c                  |   2 +-
>  drivers/net/ethernet/dlink/dl2k.h                  |   2 +-
>  drivers/net/ethernet/freescale/fec_main.c          |   7 +-
>  drivers/net/ethernet/hisilicon/hns3/hns3_debugfs.c |   2 +-
>  drivers/net/ethernet/hisilicon/hns3/hns3_enet.c    |  82 ++-
>  .../net/ethernet/hisilicon/hns3/hns3pf/hclge_ptp.c |  13 +-
>  .../ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c  |  25 +-
>  .../ethernet/hisilicon/hns3/hns3vf/hclgevf_main.h  |   1 +
>  drivers/net/ethernet/intel/ice/ice.h               |   5 -
>  drivers/net/ethernet/intel/ice/ice_common.c        | 208 ++++----
>  drivers/net/ethernet/intel/ice/ice_common.h        |   7 +-
>  drivers/net/ethernet/intel/ice/ice_ddp.c           |  10 +-
>  drivers/net/ethernet/intel/ice/ice_gnss.c          |  31 +-
>  drivers/net/ethernet/intel/ice/ice_gnss.h          |   4 +-
>  drivers/net/ethernet/intel/ice/ice_lib.c           |   2 +-
>  drivers/net/ethernet/intel/ice/ice_ptp.c           | 137 ++---
>  drivers/net/ethernet/intel/ice/ice_ptp_hw.c        | 235 +++------
>  drivers/net/ethernet/intel/ice/ice_ptp_hw.h        |  11 +-
>  drivers/net/ethernet/intel/ice/ice_type.h          |   9 -
>  drivers/net/ethernet/intel/ice/ice_virtchnl_fdir.c |   5 +
>  drivers/net/ethernet/intel/idpf/idpf.h             |  18 +-
>  drivers/net/ethernet/intel/idpf/idpf_lib.c         |  76 ++-
>  drivers/net/ethernet/intel/idpf/idpf_main.c        |   1 +
>  drivers/net/ethernet/intel/igc/igc_ptp.c           |   6 +-
>  .../net/ethernet/marvell/octeon_ep/octep_main.c    |   2 +-
>  .../ethernet/marvell/octeon_ep_vf/octep_vf_main.c  |   4 +-
>  drivers/net/ethernet/mediatek/mtk_eth_soc.c        |  18 +-
>  drivers/net/ethernet/mediatek/mtk_star_emac.c      |  13 +-
>  .../ethernet/mellanox/mlx5/core/en/reporter_tx.c   |   6 +-
>  .../ethernet/mellanox/mlx5/core/en/tc_tun_vxlan.c  |  32 +-
>  drivers/net/ethernet/mellanox/mlx5/core/en_tc.c    |   5 +-
>  .../ethernet/mellanox/mlx5/core/eswitch_offloads.c |   5 +-
>  drivers/net/ethernet/mellanox/mlx5/core/rdma.c     |  11 +-
>  drivers/net/ethernet/mellanox/mlx5/core/rdma.h     |   4 +-
>  drivers/net/ethernet/microchip/lan743x_main.c      |   8 +-
>  drivers/net/ethernet/microchip/lan743x_main.h      |   1 +
>  drivers/net/ethernet/mscc/ocelot.c                 |   6 +
>  drivers/net/ethernet/realtek/rtase/rtase_main.c    |   4 +-
>  drivers/net/ethernet/vertexcom/mse102x.c           |  36 +-
>  drivers/net/mdio/mdio-mux-meson-gxl.c              |   3 +-
>  drivers/net/usb/rndis_host.c                       |  16 +-
>  drivers/net/vxlan/vxlan_vnifilter.c                |   8 +-
>  .../net/wireless/broadcom/brcm80211/brcmfmac/usb.c |   6 +-
>  drivers/net/wireless/intel/iwlwifi/iwl-csr.h       |   1 +
>  drivers/net/wireless/intel/iwlwifi/iwl-trans.c     |  28 +-
>  drivers/net/wireless/intel/iwlwifi/iwl-trans.h     |   7 +-
>  drivers/net/wireless/intel/iwlwifi/pcie/drv.c      |  24 +-
>  drivers/net/wireless/intel/iwlwifi/pcie/internal.h |   9 +-
>  drivers/net/wireless/intel/iwlwifi/pcie/trans.c    |  16 +-
>  drivers/net/wireless/intel/iwlwifi/pcie/tx.c       |   2 +-
>  drivers/net/wireless/purelifi/plfxlc/mac.c         |   1 -
>  drivers/nvme/host/Kconfig                          |   1 +
>  drivers/nvme/host/pci.c                            |   2 +-
>  drivers/nvme/host/tcp.c                            |  31 +-
>  drivers/nvme/target/Kconfig                        |   1 +
>  drivers/pinctrl/freescale/pinctrl-imx.c            |   6 +-
>  drivers/pinctrl/mediatek/pinctrl-airoha.c          | 159 +++---
>  drivers/pinctrl/qcom/pinctrl-sm8750.c              |   4 +-
>  drivers/platform/x86/amd/pmc/pmc.c                 |   7 +-
>  drivers/platform/x86/dell/alienware-wmi.c          |   9 +
>  .../x86/intel/uncore-frequency/uncore-frequency.c  |  13 +-
>  drivers/ptp/ptp_ocp.c                              |  52 +-
>  drivers/spi/spi-mem.c                              |   6 +-
>  drivers/spi/spi-tegra114.c                         |   6 +-
>  drivers/ufs/core/ufshcd.c                          |   2 -
>  fs/bcachefs/btree_update_interior.c                |  17 +-
>  fs/bcachefs/error.c                                |   8 +
>  fs/bcachefs/error.h                                |   2 +
>  fs/bcachefs/xattr_format.h                         |   8 +-
>  fs/btrfs/btrfs_inode.h                             |   8 +
>  fs/btrfs/extent_io.c                               |   2 +-
>  fs/btrfs/file.c                                    |   1 -
>  fs/btrfs/inode.c                                   | 152 +++---
>  fs/btrfs/ioctl.c                                   |   1 +
>  fs/btrfs/zoned.c                                   |  18 +-
>  fs/smb/client/smb2pdu.c                            |   1 +
>  fs/smb/server/auth.c                               |  14 +-
>  fs/smb/server/mgmt/user_session.c                  |  20 +-
>  fs/smb/server/mgmt/user_session.h                  |   1 +
>  fs/smb/server/smb2pdu.c                            |   9 -
>  include/linux/blkdev.h                             |  67 ++-
>  include/linux/cpufreq.h                            |  86 ++--
>  include/linux/iommu.h                              |   8 +-
>  include/linux/module.h                             |   2 +
>  include/net/bluetooth/hci.h                        |   4 +-
>  include/net/bluetooth/hci_core.h                   |  20 +-
>  include/net/bluetooth/hci_sync.h                   |   3 +
>  include/net/xdp_sock.h                             |   3 -
>  include/net/xsk_buff_pool.h                        |   4 +-
>  include/sound/ump_convert.h                        |   2 +-
>  kernel/params.c                                    |   6 +-
>  kernel/trace/trace.c                               |   5 +-
>  kernel/trace/trace_output.c                        |   4 +-
>  mm/memblock.c                                      |  12 +-
>  mm/slub.c                                          |  27 +-
>  net/bluetooth/hci_conn.c                           | 181 +------
>  net/bluetooth/hci_event.c                          |  15 +-
>  net/bluetooth/hci_sync.c                           | 150 +++++-
>  net/bluetooth/iso.c                                |  26 +-
>  net/bluetooth/l2cap_core.c                         |   3 +
>  net/ipv4/tcp_offload.c                             |   2 +-
>  net/ipv4/udp_offload.c                             |  61 ++-
>  net/ipv6/tcpv6_offload.c                           |   2 +-
>  net/sched/sch_drr.c                                |  16 +-
>  net/sched/sch_ets.c                                |  17 +-
>  net/sched/sch_hfsc.c                               |  10 +-
>  net/sched/sch_htb.c                                |   2 +
>  net/sched/sch_qfq.c                                |  18 +-
>  net/xdp/xsk.c                                      |   6 +-
>  net/xdp/xsk_buff_pool.c                            |   1 +
>  sound/pci/hda/patch_realtek.c                      |  23 +-
>  sound/soc/amd/acp/acp-i2s.c                        |   2 +-
>  sound/soc/codecs/Kconfig                           |   5 +-
>  sound/soc/generic/simple-card-utils.c              |   4 +-
>  sound/soc/renesas/rz-ssi.c                         |   2 +-
>  sound/soc/sdw_utils/soc_sdw_rt_dmic.c              |   2 +
>  sound/soc/soc-core.c                               |  32 +-
>  sound/soc/soc-pcm.c                                |   5 +-
>  sound/soc/stm/stm32_sai_sub.c                      |  16 +-
>  sound/usb/endpoint.c                               |   7 +
>  sound/usb/format.c                                 |   3 +-
>  194 files changed, 2373 insertions(+), 1773 deletions(-)
>
>
>

Re: [PATCH 6.14 000/183] 6.14.6-rc1 review

[Jon Hunter]

On Wed, 07 May 2025 20:37:25 +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 6.14.6 release.
> There are 183 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Fri, 09 May 2025 18:37:41 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.14.6-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.14.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h

All tests passing for Tegra ...

Test results for stable-v6.14:
    10 builds:	10 pass, 0 fail
    28 boots:	28 pass, 0 fail
    116 tests:	116 pass, 0 fail

Linux version:	6.14.6-rc1-ga33747967783
Boards tested:	tegra124-jetson-tk1, tegra186-p2771-0000,
                tegra186-p3509-0000+p3636-0001, tegra194-p2972-0000,
                tegra194-p3509-0000+p3668-0000, tegra20-ventana,
                tegra210-p2371-2180, tegra210-p3450-0000,
                tegra30-cardhu-a04

Tested-by: Jon Hunter <jonathanh@nvidia.com>

Jon

Re: [PATCH 6.14 000/183] 6.14.6-rc1 review

[Takeshi Ogasawara]

Hi Greg

On Thu, May 8, 2025 at 3:50 AM Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 6.14.6 release.
> There are 183 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Fri, 09 May 2025 18:37:41 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
>         https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.14.6-rc1.gz
> or in the git tree and branch at:
>         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.14.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>

6.14.6-rc1 tested.

Build successfully completed.
Boot successfully completed.
No dmesg regressions.
Video output normal.
Sound output normal.

Lenovo ThinkPad X1 Carbon Gen10(Intel i7-1260P(x86_64) arch linux)

[    0.000000] Linux version 6.14.6-rc1rv-ga33747967783
(takeshi@ThinkPadX1Gen10J0764) (gcc (GCC) 15.1.1 20250425, GNU ld (GNU
Binutils) 2.44.0) #1 SMP PREEMPT_DYNAMIC Thu May  8 20:39:36 JST 2025

Thanks

Tested-by: Takeshi Ogasawara <takeshi.ogasawara@futuring-girl.com>

Re: [PATCH 6.14 000/183] 6.14.6-rc1 review

[Miguel Ojeda]

On Wed, 07 May 2025 20:37:25 +0200 Greg Kroah-Hartman <gregkh@linuxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 6.14.6 release.
> There are 183 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Fri, 09 May 2025 18:37:41 +0000.
> Anything received after that time might be too late.

Boot-tested under QEMU for Rust x86_64, arm64 and riscv64; built-tested
for loongarch64:

Tested-by: Miguel Ojeda <ojeda@kernel.org>

Thanks!

Cheers,
Miguel

Re: [PATCH 6.14 000/183] 6.14.6-rc1 review

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 345 bytes --]

On Wed, May 07, 2025 at 08:37:25PM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 6.14.6 release.
> There are 183 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.

Tested-by: Mark Brown <broonie@kernel.org>

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

Re: [PATCH 6.14 000/183] 6.14.6-rc1 review

[Shuah Khan]

On 5/7/25 12:37, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 6.14.6 release.
> There are 183 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Fri, 09 May 2025 18:37:41 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.14.6-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.14.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Compiled and booted on my test system. No dmesg regressions.

Tested-by: Shuah Khan <skhan@linuxfoundation.org>

thanks,
-- Shuah

Re: [PATCH 6.14 000/183] 6.14.6-rc1 review

[Peter Schneider]

Am 07.05.2025 um 20:37 schrieb Greg Kroah-Hartman:
> This is the start of the stable review cycle for the 6.14.6 release.
> There are 183 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.

Builds, boots and works on my 2-socket Ivy Bridge Xeon E5-2697 v2 server. No dmesg 
oddities or regressions found.

Tested-by: Peter Schneider <pschneider1968@googlemail.com>


Beste Grüße,
Peter Schneider

-- 
Climb the mountain not to plant your flag, but to embrace the challenge,
enjoy the air and behold the view. Climb it so you can see the world,
not so the world can see you.                    -- David McCullough Jr.

OpenPGP:  0xA3828BD796CCE11A8CADE8866E3A92C92C3FF244
Download: https://www.peters-netzplatz.de/download/pschneider1968_pub.asc
https://keys.mailvelope.com/pks/lookup?op=get&search=pschneider1968@googlemail.com
https://keys.mailvelope.com/pks/lookup?op=get&search=pschneider1968@gmail.com

Re: [PATCH 6.14 000/183] 6.14.6-rc1 review

[Florian Fainelli]

On 5/7/2025 8:37 PM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 6.14.6 release.
> There are 183 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Fri, 09 May 2025 18:37:41 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.14.6-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.14.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h

On ARCH_BRCMSTB using 32-bit and 64-bit ARM kernels build tested on 
BMIPS_GENERIC:

Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
-- 
Florian

Re: [PATCH 6.14 000/183] 6.14.6-rc1 review

[Ron Economos]

On 5/7/25 11:37, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 6.14.6 release.
> There are 183 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Fri, 09 May 2025 18:37:41 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.14.6-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.14.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h

Built and booted successfully on RISC-V RV64 (HiFive Unmatched).

Tested-by: Ron Economos <re@w6rz.net>

Re: [PATCH 6.14 000/183] 6.14.6-rc1 review

[Christian Heusel]

[-- Attachment #1: Type: text/plain, Size: 593 bytes --]

On 25/05/07 08:37PM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 6.14.6 release.
> There are 183 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Fri, 09 May 2025 18:37:41 +0000.
> Anything received after that time might be too late.

Tested-by: Christian Heusel <christian@heusel.eu>

Tested on a ThinkPad E14 Gen 3 with a AMD Ryzen 5 5500U CPU and on the
Steam Deck (LCD variant) aswell as a Framework Desktop.

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]