[PATCH 6.6 034/109] x86/mce/amd: Fix threshold limit reset

[Greg Kroah-Hartman <gregkh@linuxfoundation.org>]

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Yazen Ghannam <yazen.ghannam@amd.com>

commit 5f6e3b720694ad771911f637a51930f511427ce1 upstream.

The MCA threshold limit must be reset after servicing the interrupt.

Currently, the restart function doesn't have an explicit check for this.  It
makes some assumptions based on the current limit and what's in the registers.
These assumptions don't always hold, so the limit won't be reset in some
cases.

Make the reset condition explicit. Either an interrupt/overflow has occurred
or the bank is being initialized.

Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/20250624-wip-mca-updates-v4-4-236dd74f645f@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/x86/kernel/cpu/mce/amd.c |   15 +++++++--------
 1 file changed, 7 insertions(+), 8 deletions(-)

--- a/arch/x86/kernel/cpu/mce/amd.c
+++ b/arch/x86/kernel/cpu/mce/amd.c
@@ -335,7 +335,6 @@ static void smca_configure(unsigned int
 
 struct thresh_restart {
 	struct threshold_block	*b;
-	int			reset;
 	int			set_lvt_off;
 	int			lvt_off;
 	u16			old_limit;
@@ -430,13 +429,13 @@ static void threshold_restart_bank(void
 
 	rdmsr(tr->b->address, lo, hi);
 
-	if (tr->b->threshold_limit < (hi & THRESHOLD_MAX))
-		tr->reset = 1;	/* limit cannot be lower than err count */
-
-	if (tr->reset) {		/* reset err count and overflow bit */
-		hi =
-		    (hi & ~(MASK_ERR_COUNT_HI | MASK_OVERFLOW_HI)) |
-		    (THRESHOLD_MAX - tr->b->threshold_limit);
+	/*
+	 * Reset error count and overflow bit.
+	 * This is done during init or after handling an interrupt.
+	 */
+	if (hi & MASK_OVERFLOW_HI || tr->set_lvt_off) {
+		hi &= ~(MASK_ERR_COUNT_HI | MASK_OVERFLOW_HI);
+		hi |= THRESHOLD_MAX - tr->b->threshold_limit;
 	} else if (tr->old_limit) {	/* change limit w/o reset */
 		int new_count = (hi & THRESHOLD_MAX) +
 		    (tr->old_limit - tr->b->threshold_limit);